comvar.h revision 1.87
1 /* $NetBSD: comvar.h,v 1.87 2018/05/27 17:05:06 jmcneill Exp $ */ 2 3 /* 4 * Copyright (c) 1996 Christopher G. Demetriou. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Christopher G. Demetriou 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include "opt_multiprocessor.h" 34 #include "opt_lockdebug.h" 35 #include "opt_com.h" 36 #include "opt_kgdb.h" 37 38 #ifdef RND_COM 39 #include <sys/rndsource.h> 40 #endif 41 42 #include <sys/callout.h> 43 #include <sys/timepps.h> 44 #include <sys/mutex.h> 45 #include <sys/device.h> 46 47 #include <dev/ic/comreg.h> /* for COM_NPORTS */ 48 49 struct com_regs; 50 51 int comcnattach(bus_space_tag_t, bus_addr_t, int, int, int, tcflag_t); 52 int comcnattach1(struct com_regs *, int, int, int, tcflag_t); 53 54 #ifdef KGDB 55 int com_kgdb_attach(bus_space_tag_t, bus_addr_t, int, int, int, tcflag_t); 56 int com_kgdb_attach1(struct com_regs *, int, int, int, tcflag_t); 57 #endif 58 59 int com_is_console(bus_space_tag_t, bus_addr_t, bus_space_handle_t *); 60 61 /* Hardware flag masks */ 62 #define COM_HW_NOIEN 0x01 63 #define COM_HW_FIFO 0x02 64 /* 0x04 free for use */ 65 #define COM_HW_FLOW 0x08 66 #define COM_HW_DEV_OK 0x20 67 #define COM_HW_CONSOLE 0x40 68 #define COM_HW_KGDB 0x80 69 #define COM_HW_TXFIFO_DISABLE 0x100 70 #define COM_HW_NO_TXPRELOAD 0x200 71 #define COM_HW_AFE 0x400 72 73 /* Buffer size for character buffer */ 74 #ifndef COM_RING_SIZE 75 #define COM_RING_SIZE 2048 76 #endif 77 78 #ifdef COM_REGMAP 79 #define COM_REG_RXDATA 0 80 #define COM_REG_TXDATA 1 81 #define COM_REG_DLBL 2 82 #define COM_REG_DLBH 3 83 #define COM_REG_IER 4 84 #define COM_REG_IIR 5 85 #define COM_REG_FIFO 6 86 #define COM_REG_TCR 6 87 #define COM_REG_EFR 7 88 #define COM_REG_TLR 7 89 #define COM_REG_LCR 8 90 #define COM_REG_MDR1 8 91 #define COM_REG_MCR 9 92 #define COM_REG_LSR 10 93 #define COM_REG_MSR 11 94 #define COM_REG_USR 31 /* 16750/DW APB */ 95 #define COM_REG_TFL com_tfl /* DW APB */ 96 #define COM_REG_RFL com_rfl /* DW APB */ 97 #define COM_REG_HALT com_halt /* DW APB */ 98 99 struct com_regs { 100 bus_space_tag_t cr_iot; 101 bus_space_handle_t cr_ioh; 102 bus_addr_t cr_iobase; 103 bus_size_t cr_nports; 104 bus_size_t cr_map[42]; 105 }; 106 107 extern const bus_size_t com_std_map[42]; 108 109 #define COM_INIT_REGS(regs, tag, hdl, addr) \ 110 do { \ 111 regs.cr_iot = tag; \ 112 regs.cr_ioh = hdl; \ 113 regs.cr_iobase = addr; \ 114 regs.cr_nports = COM_NPORTS; \ 115 memcpy(regs.cr_map, com_std_map, sizeof (regs.cr_map)); \ 116 } while (0) 117 118 #else 119 #define COM_REG_RXDATA com_data 120 #define COM_REG_TXDATA com_data 121 #define COM_REG_DLBL com_dlbl 122 #define COM_REG_DLBH com_dlbh 123 #define COM_REG_IER com_ier 124 #define COM_REG_IIR com_iir 125 #define COM_REG_FIFO com_fifo 126 #define COM_REG_EFR com_efr 127 #define COM_REG_LCR com_lctl 128 #define COM_REG_MCR com_mcr 129 #define COM_REG_LSR com_lsr 130 #define COM_REG_MSR com_msr 131 #define COM_REG_TCR com_msr 132 #define COM_REG_TLR com_scratch 133 #define COM_REG_MDR1 8 134 #define COM_REG_USR com_usr /* 16750/DW APB */ 135 #define COM_REG_TFL com_tfl /* DW APB */ 136 #define COM_REG_RFL com_rfl /* DW APB */ 137 #define COM_REG_HALT com_halt /* DW APB */ 138 139 struct com_regs { 140 bus_space_tag_t cr_iot; 141 bus_space_handle_t cr_ioh; 142 bus_addr_t cr_iobase; 143 bus_size_t cr_nports; 144 }; 145 146 #define COM_INIT_REGS(regs, tag, hdl, addr) \ 147 do { \ 148 regs.cr_iot = tag; \ 149 regs.cr_ioh = hdl; \ 150 regs.cr_iobase = addr; \ 151 regs.cr_nports = COM_NPORTS; \ 152 } while (0) 153 154 #endif 155 156 struct comcons_info { 157 struct com_regs regs; 158 int rate; 159 int frequency; 160 int type; 161 tcflag_t cflag; 162 }; 163 164 struct com_softc { 165 device_t sc_dev; 166 void *sc_si; 167 struct tty *sc_tty; 168 169 struct callout sc_diag_callout; 170 171 int sc_frequency; 172 173 struct com_regs sc_regs; 174 bus_space_handle_t sc_hayespioh; 175 176 177 u_int sc_overflows, 178 sc_floods, 179 sc_errors; 180 181 int sc_hwflags, 182 sc_swflags; 183 u_int sc_fifolen; 184 185 u_int sc_r_hiwat, 186 sc_r_lowat; 187 u_char *volatile sc_rbget, 188 *volatile sc_rbput; 189 volatile u_int sc_rbavail; 190 u_char *sc_rbuf, 191 *sc_ebuf; 192 193 u_char *sc_tba; 194 u_int sc_tbc, 195 sc_heldtbc; 196 197 volatile u_char sc_rx_flags, 198 #define RX_TTY_BLOCKED 0x01 199 #define RX_TTY_OVERFLOWED 0x02 200 #define RX_IBUF_BLOCKED 0x04 201 #define RX_IBUF_OVERFLOWED 0x08 202 #define RX_ANY_BLOCK 0x0f 203 sc_tx_busy, 204 sc_tx_done, 205 sc_tx_stopped, 206 sc_st_check, 207 sc_rx_ready; 208 209 volatile u_char sc_heldchange; 210 volatile u_char sc_msr, sc_msr_delta, sc_msr_mask, sc_mcr, 211 sc_mcr_active, sc_lcr, sc_ier, sc_fifo, sc_dlbl, sc_dlbh, sc_efr; 212 u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd; 213 214 u_char sc_prescaler; /* for COM_TYPE_HAYESP */ 215 216 /* 217 * There are a great many almost-ns16550-compatible UARTs out 218 * there, which have minor differences. The type field here 219 * lets us distinguish between them. 220 */ 221 int sc_type; 222 #define COM_TYPE_NORMAL 0 /* normal 16x50 */ 223 #define COM_TYPE_HAYESP 1 /* Hayes ESP modem */ 224 #define COM_TYPE_PXA2x0 2 /* Intel PXA2x0 processor built-in */ 225 #define COM_TYPE_AU1x00 3 /* AMD/Alchemy Au1x000 proc. built-in */ 226 #define COM_TYPE_OMAP 4 /* TI OMAP processor built-in */ 227 #define COM_TYPE_16550_NOERS 5 /* like a 16550, no ERS */ 228 #define COM_TYPE_INGENIC 6 /* JZ4780 built-in */ 229 #define COM_TYPE_TEGRA 7 /* NVIDIA Tegra built-in */ 230 #define COM_TYPE_BCMAUXUART 8 /* BCM2835 AUX UART */ 231 #define COM_TYPE_16650 9 232 #define COM_TYPE_16750 10 233 #define COM_TYPE_DW_APB 11 /* DesignWare APB UART */ 234 235 /* power management hooks */ 236 int (*enable)(struct com_softc *); 237 void (*disable)(struct com_softc *); 238 int enabled; 239 240 /* XXXX: vendor workaround functions */ 241 int (*sc_vendor_workaround)(struct com_softc *); 242 243 struct pps_state sc_pps_state; /* pps state */ 244 245 #ifdef RND_COM 246 krndsource_t rnd_source; 247 #endif 248 kmutex_t sc_lock; 249 }; 250 251 int comprobe1(bus_space_tag_t, bus_space_handle_t); 252 int comintr(void *); 253 void com_attach_subr(struct com_softc *); 254 int com_probe_subr(struct com_regs *); 255 int com_detach(device_t, int); 256 bool com_resume(device_t, const pmf_qual_t *); 257 bool com_cleanup(device_t, int); 258 bool com_suspend(device_t, const pmf_qual_t *); 259 260 #ifndef IPL_SERIAL 261 #define IPL_SERIAL IPL_TTY 262 #define splserial() spltty() 263 #endif 264
Indexes created Thu Sep 25 16:09:42 GMT 2025