comvar.h revision 1.96
1 /* $NetBSD: comvar.h,v 1.96 2021/11/12 21:57:13 jmcneill Exp $ */ 2 3 /* 4 * Copyright (c) 1996 Christopher G. Demetriou. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Christopher G. Demetriou 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include "opt_multiprocessor.h" 34 #include "opt_lockdebug.h" 35 #include "opt_com.h" 36 #include "opt_kgdb.h" 37 38 #ifdef RND_COM 39 #include <sys/rndsource.h> 40 #endif 41 42 #include <sys/callout.h> 43 #include <sys/timepps.h> 44 #include <sys/mutex.h> 45 #include <sys/device.h> 46 47 #include <dev/ic/comreg.h> /* for COM_NPORTS */ 48 49 struct com_regs; 50 51 int comcnattach(bus_space_tag_t, bus_addr_t, int, int, int, tcflag_t); 52 int comcnattach1(struct com_regs *, int, int, int, tcflag_t); 53 54 #ifdef KGDB 55 int com_kgdb_attach(bus_space_tag_t, bus_addr_t, int, int, int, tcflag_t); 56 int com_kgdb_attach1(struct com_regs *, int, int, int, tcflag_t); 57 #endif 58 59 int com_is_console(bus_space_tag_t, bus_addr_t, bus_space_handle_t *); 60 61 /* Hardware flag masks */ 62 #define COM_HW_NOIEN 0x01 63 #define COM_HW_FIFO 0x02 64 #define COM_HW_BROKEN_ETXRDY 0x04 65 #define COM_HW_FLOW 0x08 66 #define COM_HW_DEV_OK 0x20 67 #define COM_HW_CONSOLE 0x40 68 #define COM_HW_KGDB 0x80 69 #define COM_HW_TXFIFO_DISABLE 0x100 70 #define COM_HW_NO_TXPRELOAD 0x200 71 #define COM_HW_AFE 0x400 72 73 /* Buffer size for character buffer */ 74 #ifndef COM_RING_SIZE 75 #define COM_RING_SIZE 2048 76 #endif 77 78 #define COM_REG_RXDATA 0 79 #define COM_REG_TXDATA 1 80 #define COM_REG_DLBL 2 81 #define COM_REG_DLBH 3 82 #define COM_REG_IER 4 83 #define COM_REG_IIR 5 84 #define COM_REG_FIFO 6 85 #define COM_REG_TCR 7 86 #define COM_REG_EFR 8 87 #define COM_REG_TLR 9 88 #define COM_REG_LCR 10 89 #define COM_REG_MCR 11 90 #define COM_REG_LSR 12 91 #define COM_REG_MSR 13 92 #define COM_REG_MDR1 14 /* TI OMAP */ 93 #define COM_REG_USR 15 /* 16750/DW APB */ 94 #define COM_REG_TFL 16 /* DW APB */ 95 #define COM_REG_RFL 17 /* DW APB */ 96 #define COM_REG_HALT 18 /* DW APB */ 97 98 #define COM_REGMAP_NENTRIES 19 99 100 struct com_regs { 101 bus_space_tag_t cr_iot; 102 bus_space_handle_t cr_ioh; 103 bus_addr_t cr_iobase; 104 bus_size_t cr_nports; 105 bus_size_t cr_map[COM_REGMAP_NENTRIES]; 106 uint8_t (*cr_read)(struct com_regs *, u_int); 107 void (*cr_write)(struct com_regs *, u_int, uint8_t); 108 void (*cr_write_multi)(struct com_regs *, u_int, 109 const uint8_t *, 110 bus_size_t); 111 112 }; 113 114 void com_init_regs(struct com_regs *, bus_space_tag_t, bus_space_handle_t, 115 bus_addr_t); 116 void com_init_regs_stride(struct com_regs *, bus_space_tag_t, 117 bus_space_handle_t, bus_addr_t, u_int); 118 void com_init_regs_stride_width(struct com_regs *, bus_space_tag_t, 119 bus_space_handle_t, bus_addr_t, u_int, u_int); 120 121 struct comcons_info { 122 struct com_regs regs; 123 int rate; 124 int frequency; 125 int type; 126 tcflag_t cflag; 127 }; 128 129 struct com_softc { 130 device_t sc_dev; 131 void *sc_si; 132 struct tty *sc_tty; 133 134 callout_t sc_diag_callout; 135 callout_t sc_poll_callout; 136 struct timeval sc_hup_pending; 137 138 int sc_frequency; 139 140 struct com_regs sc_regs; 141 bus_space_handle_t sc_hayespioh; 142 143 144 u_int sc_overflows, 145 sc_floods, 146 sc_errors; 147 148 int sc_hwflags, 149 sc_swflags; 150 u_int sc_fifolen; 151 152 u_int sc_r_hiwat, 153 sc_r_lowat; 154 u_char *volatile sc_rbget, 155 *volatile sc_rbput; 156 volatile u_int sc_rbavail; 157 u_char *sc_rbuf, 158 *sc_ebuf; 159 160 u_char *sc_tba; 161 u_int sc_tbc, 162 sc_heldtbc; 163 164 volatile u_char sc_rx_flags, 165 #define RX_TTY_BLOCKED 0x01 166 #define RX_TTY_OVERFLOWED 0x02 167 #define RX_IBUF_BLOCKED 0x04 168 #define RX_IBUF_OVERFLOWED 0x08 169 #define RX_ANY_BLOCK 0x0f 170 sc_tx_busy, 171 sc_tx_done, 172 sc_tx_stopped, 173 sc_st_check, 174 sc_rx_ready; 175 176 volatile u_char sc_heldchange; 177 volatile u_char sc_msr, sc_msr_delta, sc_msr_mask, sc_mcr, 178 sc_mcr_active, sc_lcr, sc_ier, sc_fifo, sc_dlbl, sc_dlbh, sc_efr; 179 u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd; 180 181 u_char sc_prescaler; /* for COM_TYPE_HAYESP */ 182 183 /* 184 * There are a great many almost-ns16550-compatible UARTs out 185 * there, which have minor differences. The type field here 186 * lets us distinguish between them. 187 */ 188 int sc_type; 189 #define COM_TYPE_NORMAL 0 /* normal 16x50 */ 190 #define COM_TYPE_HAYESP 1 /* Hayes ESP modem */ 191 #define COM_TYPE_PXA2x0 2 /* Intel PXA2x0 processor built-in */ 192 #define COM_TYPE_AU1x00 3 /* AMD/Alchemy Au1x000 proc. built-in */ 193 #define COM_TYPE_OMAP 4 /* TI OMAP processor built-in */ 194 #define COM_TYPE_16550_NOERS 5 /* like a 16550, no ERS */ 195 #define COM_TYPE_INGENIC 6 /* JZ4780 built-in */ 196 #define COM_TYPE_TEGRA 7 /* NVIDIA Tegra built-in */ 197 #define COM_TYPE_BCMAUXUART 8 /* BCM2835 AUX UART */ 198 #define COM_TYPE_16650 9 199 #define COM_TYPE_16750 10 200 #define COM_TYPE_DW_APB 11 /* DesignWare APB UART */ 201 202 int sc_poll_ticks; 203 204 /* power management hooks */ 205 int (*enable)(struct com_softc *); 206 void (*disable)(struct com_softc *); 207 int enabled; 208 209 /* XXXX: vendor workaround functions */ 210 int (*sc_vendor_workaround)(struct com_softc *); 211 212 struct pps_state sc_pps_state; /* pps state */ 213 214 #ifdef RND_COM 215 krndsource_t rnd_source; 216 #endif 217 kmutex_t sc_lock; 218 }; 219 220 int comprobe1(bus_space_tag_t, bus_space_handle_t); 221 int comintr(void *); 222 void com_attach_subr(struct com_softc *); 223 int com_probe_subr(struct com_regs *); 224 int com_detach(device_t, int); 225 bool com_resume(device_t, const pmf_qual_t *); 226 bool com_cleanup(device_t, int); 227 bool com_suspend(device_t, const pmf_qual_t *); 228 229 #ifndef IPL_SERIAL 230 #define IPL_SERIAL IPL_TTY 231 #define splserial() spltty() 232 #endif 233
Indexes created Fri Sep 26 08:10:20 GMT 2025