elink3reg.h revision 1.23
1 /* $NetBSD: elink3reg.h,v 1.23 2001/07/20 05:43:11 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 1995 Herb Peyerl <hpeyerl (at) beer.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Herb Peyerl. 18 * 4. The name of Herb Peyerl may not be used to endorse or promote products 19 * derived from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 */ 33 34 /* 35 * These define the EEPROM data structure. They are used in the probe 36 * function to verify the existance of the adapter after having sent 37 * the ID_Sequence. 38 */ 39 #define EEPROM_NODE_ADDR_0 0x0 /* Word */ 40 #define EEPROM_NODE_ADDR_1 0x1 /* Word */ 41 #define EEPROM_NODE_ADDR_2 0x2 /* Word */ 42 #define EEPROM_PROD_ID 0x3 /* 0x9[0-f]50 */ 43 #define EEPROM_MFG_DATE 0x4 /* Manufacturing date */ 44 #define EEPROM_MFG_DIVSION 0x5 /* Manufacturing division */ 45 #define EEPROM_MFG_PRODUCT 0x6 /* Product code */ 46 #define EEPROM_MFG_ID 0x7 /* 0x6d50 */ 47 #define EEPROM_ADDR_CFG 0x8 /* Base addr */ 48 #define EEPROM_RESOURCE_CFG 0x9 /* IRQ. Bits 12-15 */ 49 #define EEPROM_OEM_ADDR0 0xa 50 #define EEPROM_OEM_ADDR1 0xb 51 #define EEPROM_OEM_ADDR2 0xc 52 #define EEPROM_SOFTINFO 0xd 53 #define EEPROM_COMPAT 0xe 54 #define EEPROM_SOFTINFO2 0xf 55 #define EEPROM_CAP 0x10 56 #define EEPROM_CONFIG_LOW 0x12 57 #define EEPROM_CONFIG_HIGH 0x13 58 #define EEPROM_SSI 0x14 59 #define EEPROM_CHECKSUM_EL3 0x17 60 61 /* 62 * These are the registers for the 3Com 3c509 and their bit patterns when 63 * applicable. They have been taken out of the "EtherLink III Parallel 64 * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual 65 * from 3com. 66 */ 67 #define ELINK_COMMAND 0x0e /* Write. BASE+0x0e is always a command reg. */ 68 #define ELINK_STATUS 0x0e /* Read. BASE+0x0e is always status reg. */ 69 #define ELINK_WINDOW 0x0f /* Read. BASE+0x0f is always window reg. */ 70 71 /* 72 * Corkscrew ISA Bridge ASIC registers. 73 */ 74 #define CORK_ASIC_DCR 0x2000 75 #define CORK_ASIC_RCR 0x2002 76 #define CORK_ASIC_ROM_PAGE 0x2004 /* 8-bit */ 77 #define CORK_ASIC_MCR 0x2006 /* 8-bit */ 78 #define CORK_ASIC_DEBUG 0x2008 /* 8-bit */ 79 #define CORK_ASIC_EEPROM_COMMAND 0x200a 80 #define CORK_ASIC_EEPROM_DATA 0x200c 81 82 /* 83 * Corkscrew DMA Control Register. 84 */ 85 #define DCR_CHRDYWAIT_40ns (0 << 13) 86 #define DCR_CHRDYWAIT_80ns (1 << 13) 87 #define DCR_CHRDYWAIT_120ns (2 << 13) 88 #define DCR_CHRDYWAIT_160ns (3 << 13) 89 #define DCR_RECOVWAIT_80ns (0 << 11) 90 #define DCR_RECOVWAIT_120ns (1 << 11) 91 #define DCR_RECOVWAIT_160ns (2 << 11) 92 #define DCR_RECOVWAIT_200ns (3 << 11) 93 #define DCR_CMDWIDTH(x) ((x) << 8) /* base 40ns, 40ns increments */ 94 #define DCR_BURSTLEN(x) ((x) << 3) 95 #define DCR_DRQSELECT(x) ((x) << 0) /* 3, 5, 6, 7 valid */ 96 97 /* 98 * Corkscrew Debug register. 99 */ 100 #define DEBUG_PCIBUSFAULT (1U << 0) 101 #define DEBUG_ISABUSFAULT (1U << 1) 102 103 /* 104 * Corkscrew EEPROM Command register. 105 */ 106 #define CORK_EEPROM_BUSY (1U << 9) 107 #define CORK_EEPROM_CMD_READ (1U << 7) /* Same as 3c509 */ 108 109 /* 110 * Corkscrew Master Control register. 111 */ 112 #define MCR_PCI_CONFIG (1U << 0) 113 #define MCR_WRITE_BUFFER (1U << 1) 114 #define MCR_READ_PREFETCH (1U << 2) 115 116 /* 117 * Window 0 registers. Setup. 118 */ 119 /* Write */ 120 #define ELINK_W0_EEPROM_DATA 0x0c 121 #define ELINK_W0_EEPROM_COMMAND 0x0a 122 #define ELINK_W0_RESOURCE_CFG 0x08 123 #define ELINK_W0_ADDRESS_CFG 0x06 124 #define ELINK_W0_CONFIG_CTRL 0x04 125 /* Read */ 126 #define ELINK_W0_PRODUCT_ID 0x02 127 #define ELINK_W0_MFG_ID 0x00 128 129 /* 130 * Window 1 registers. Operating Set. 131 */ 132 /* Write */ 133 #define ELINK_W1_TX_PIO_WR_2 0x02 134 #define ELINK_W1_TX_PIO_WR_1 0x00 135 /* Read */ 136 #define ELINK_W1_FREE_TX 0x0c 137 #define ELINK_W1_TX_STATUS 0x0b /* byte */ 138 #define ELINK_W1_TIMER 0x0a /* byte */ 139 #define ELINK_W1_RX_STATUS 0x08 140 #define ELINK_W1_RX_ERRORS 0x04 141 #define ELINK_W1_RX_PIO_RD_2 0x02 142 #define ELINK_W1_RX_PIO_RD_1 0x00 143 /* 144 * Special registers used by the RoadRunner. These are used to program 145 * a FIFO buffer to reduce the PCMCIA->PCI bridge latency during PIO. 146 */ 147 #define ELINK_W1_RUNNER_RDCTL 0x16 148 #define ELINK_W1_RUNNER_WRCTL 0x1c 149 150 /* 151 * Window 2 registers. Station Address Setup/Read 152 */ 153 /* Read/Write */ 154 #define ELINK_W2_RECVMASK_0 0x06 155 #define ELINK_W2_ADDR_5 0x05 156 #define ELINK_W2_ADDR_4 0x04 157 #define ELINK_W2_ADDR_3 0x03 158 #define ELINK_W2_ADDR_2 0x02 159 #define ELINK_W2_ADDR_1 0x01 160 #define ELINK_W2_ADDR_0 0x00 161 162 /* 163 * Window 3 registers. Configuration and FIFO Management. 164 */ 165 /* Read */ 166 #define ELINK_W3_FREE_TX 0x0c 167 #define ELINK_W3_FREE_RX 0x0a 168 /* Read/Write, at least on busmastering cards. */ 169 #define ELINK_W3_INTERNAL_CONFIG 0x00 /* 32 bits */ 170 #define ELINK_W3_OTHER_INT 0x04 /* 8 bits */ 171 #define ELINK_W3_PIO_RESERVED 0x05 /* 8 bits */ 172 #define ELINK_W3_MAC_CONTROL 0x06 /* 16 bits */ 173 #define ELINK_W3_RESET_OPTIONS 0x08 /* 16 bits */ 174 175 /* 176 * Window 4 registers. Diagnostics. 177 */ 178 /* Read/Write */ 179 #define ELINK_W4_MEDIA_TYPE 0x0a 180 #define ELINK_W4_CTRLR_STATUS 0x08 181 #define ELINK_W4_NET_DIAG 0x06 182 #define ELINK_W4_FIFO_DIAG 0x04 183 #define ELINK_W4_HOST_DIAG 0x02 184 #define ELINK_W4_TX_DIAG 0x00 185 186 /* 187 * Window 4 offset 8 is the PHY Management register on the 188 * 3c90x. 189 */ 190 #define ELINK_W4_BOOM_PHYSMGMT 0x08 191 #define PHYSMGMT_CLK 0x0001 192 #define PHYSMGMT_DATA 0x0002 193 #define PHYSMGMT_DIR 0x0004 194 195 196 /* 197 * Window 5 Registers. Results and Internal status. 198 */ 199 /* Read */ 200 #define ELINK_W5_READ_0_MASK 0x0c 201 #define ELINK_W5_INTR_MASK 0x0a 202 #define ELINK_W5_RX_FILTER 0x08 203 #define ELINK_W5_RX_EARLY_THRESH 0x06 204 #define ELINK_W5_TX_AVAIL_THRESH 0x02 205 #define ELINK_W5_TX_START_THRESH 0x00 206 207 /* 208 * Window 6 registers. Statistics. 209 */ 210 /* Read/Write */ 211 #define TX_TOTAL_OK 0x0c 212 #define RX_TOTAL_OK 0x0a 213 #define UPPER_FRAMES_OK 0x09 214 #define TX_DEFERRALS 0x08 215 #define RX_FRAMES_OK 0x07 216 #define TX_FRAMES_OK 0x06 217 #define RX_OVERRUNS 0x05 218 #define TX_COLLISIONS 0x04 219 #define TX_AFTER_1_COLLISION 0x03 220 #define TX_AFTER_X_COLLISIONS 0x02 221 #define TX_NO_SQE 0x01 222 #define TX_CD_LOST 0x00 223 224 /* 225 * Window 7 registers. 226 * Address and length for a single bus-master DMA transfer. 227 * Unused for elink3 cards. 228 */ 229 #define ELINK_W7_MASTER_ADDDRES 0x00 230 #define ELINK_W7_RX_ERROR 0x04 231 #define ELINK_W7_MASTER_LEN 0x06 232 #define ELINK_W7_RX_STATUS 0x08 233 #define ELINK_W7_TIMER 0x0a 234 #define ELINK_W7_TX_STATUS 0x0b 235 #define ELINK_W7_MASTER_STATUS 0x0c 236 237 /* 238 * Register definitions. 239 */ 240 241 /* 242 * Command register. All windows. 243 * 244 * 16 bit register. 245 * 15-11: 5-bit code for command to be executed. 246 * 10-0: 11-bit arg if any. For commands with no args; 247 * this can be set to anything. 248 */ 249 #define GLOBAL_RESET (u_int16_t) 0x0000 /* Wait at least 1ms after issuing */ 250 #define WINDOW_SELECT (u_int16_t) (0x1<<11) 251 #define START_TRANSCEIVER (u_int16_t) (0x2<<11) /* Read ADDR_CFG reg to determine 252 whether this is needed. If so; 253 wait 800 uSec before using trans- 254 ceiver. */ 255 #define RX_DISABLE (u_int16_t) (0x3<<11) /* state disabled on power-up */ 256 #define RX_ENABLE (u_int16_t) (0x4<<11) 257 #define RX_RESET (u_int16_t) (0x5<<11) 258 #define RX_DISCARD_TOP_PACK (u_int16_t) (0x8<<11) 259 #define TX_ENABLE (u_int16_t) (0x9<<11) 260 #define TX_DISABLE (u_int16_t) (0xa<<11) 261 #define TX_RESET (u_int16_t) (0xb<<11) 262 #define REQ_INTR (u_int16_t) (0xc<<11) 263 264 /* 265 * The following C_* acknowledge the various interrupts. 266 * Some of them don't do anything. See the manual. 267 */ 268 #define ACK_INTR (u_int16_t) (0xd << 11) 269 # define C_INTR_LATCH (u_int16_t) (ACK_INTR|0x01) 270 # define C_CARD_FAILURE (u_int16_t) (ACK_INTR|0x02) 271 # define C_TX_COMPLETE (u_int16_t) (ACK_INTR|0x04) 272 # define C_TX_AVAIL (u_int16_t) (ACK_INTR|0x08) 273 # define C_RX_COMPLETE (u_int16_t) (ACK_INTR|0x10) 274 # define C_RX_EARLY (u_int16_t) (ACK_INTR|0x20) 275 # define C_INT_RQD (u_int16_t) (ACK_INTR|0x40) 276 # define C_UPD_STATS (u_int16_t) (ACK_INTR|0x80) 277 278 #define SET_INTR_MASK (u_int16_t) (0x0e<<11) 279 280 /* busmastering-cards only? */ 281 #define STATUS_ENABLE (u_int16_t) (0xf<<11) 282 283 #define SET_RD_0_MASK (u_int16_t) (0x0f<<11) 284 285 #define SET_RX_FILTER (u_int16_t) (0x10<<11) 286 # define FIL_INDIVIDUAL (u_int16_t) (0x01) 287 # define FIL_MULTICAST (u_int16_t) (0x02) 288 # define FIL_BRDCST (u_int16_t) (0x04) 289 # define FIL_PROMISC (u_int16_t) (0x08) 290 291 #define SET_RX_EARLY_THRESH (u_int16_t) (0x11<<11) 292 #define SET_TX_AVAIL_THRESH (u_int16_t) (0x12<<11) 293 #define SET_TX_START_THRESH (u_int16_t) (0x13<<11) 294 #define START_DMA (u_int16_t) (0x14<<11) /* busmaster-only */ 295 # define START_DMA_TX (START_DMA | 0x0)) /* busmaster-only */ 296 # define START_DMA_RX (START_DMA | 0x1) /* busmaster-only */ 297 #define STATS_ENABLE (u_int16_t) (0x15<<11) 298 #define STATS_DISABLE (u_int16_t) (0x16<<11) 299 #define STOP_TRANSCEIVER (u_int16_t) (0x17<<11) 300 301 /* Only on adapters that support power management: */ 302 #define POWERUP (u_int16_t) (0x1b<<11) 303 #define POWERDOWN (u_int16_t) (0x1c<<11) 304 #define POWERAUTO (u_int16_t) (0x1d<<11) 305 306 307 308 /* 309 * Command parameter that disables threshold interrupts 310 * PIO (3c509) cards use 2044. The fifo word-oriented and 2044--2047 work. 311 * "busmastering" cards need 8188. 312 * The implicit two-bit upshift done by busmastering cards means 313 * a value of 2047 disables threshold interrupts on both. 314 */ 315 #define ELINK_THRESH_DISABLE 2047 316 317 318 /* 319 * Status register. All windows. 320 * 321 * 15-13: Window number(0-7). 322 * 12: Command_in_progress. 323 * 11: reserved / DMA in progress on busmaster cards. 324 * 10: reserved. 325 * 9: reserved. 326 * 8: reserved / DMA done on busmaster cards. 327 * 7: Update Statistics. 328 * 6: Interrupt Requested. 329 * 5: RX Early. 330 * 4: RX Complete. 331 * 3: TX Available. 332 * 2: TX Complete. 333 * 1: Adapter Failure. 334 * 0: Interrupt Latch. 335 */ 336 #define S_INTR_LATCH (u_int16_t) (0x0001) 337 #define S_CARD_FAILURE (u_int16_t) (0x0002) 338 #define S_TX_COMPLETE (u_int16_t) (0x0004) 339 #define S_TX_AVAIL (u_int16_t) (0x0008) 340 #define S_RX_COMPLETE (u_int16_t) (0x0010) 341 #define S_RX_EARLY (u_int16_t) (0x0020) 342 #define S_INT_RQD (u_int16_t) (0x0040) 343 #define S_UPD_STATS (u_int16_t) (0x0080) 344 #define S_DMA_DONE (u_int16_t) (0x0100) /* DMA cards only */ 345 #define S_DMA_IN_PROGRESS (u_int16_t) (0x0800) /* DMA cards only */ 346 #define S_COMMAND_IN_PROGRESS (u_int16_t) (0x1000) 347 348 /* 349 * FIFO Registers. RX Status. 350 * 351 * 15: Incomplete or FIFO empty. 352 * 14: 1: Error in RX Packet 0: Incomplete or no error. 353 * 14-11: Type of error. [14-11] 354 * 1000 = Overrun. 355 * 1011 = Run Packet Error. 356 * 1100 = Alignment Error. 357 * 1101 = CRC Error. 358 * 1001 = Oversize Packet Error (>1514 bytes) 359 * 0010 = Dribble Bits. 360 * (all other error codes, no errors.) 361 * 362 * 10-0: RX Bytes (0-1514) 363 */ 364 #define ERR_INCOMPLETE (u_int16_t) (0x8000) 365 #define ERR_RX (u_int16_t) (0x4000) 366 #define ERR_MASK (u_int16_t) (0x7800) 367 #define ERR_OVERRUN (u_int16_t) (0x4000) 368 #define ERR_RUNT (u_int16_t) (0x5800) 369 #define ERR_ALIGNMENT (u_int16_t) (0x6000) 370 #define ERR_CRC (u_int16_t) (0x6800) 371 #define ERR_OVERSIZE (u_int16_t) (0x4800) 372 #define ERR_DRIBBLE (u_int16_t) (0x1000) 373 374 /* 375 * TX Status 376 * 377 * Reports the transmit status of a completed transmission. Writing this 378 * register pops the transmit completion stack. 379 * 380 * Window 1/Port 0x0b. 381 * 382 * 7: Complete 383 * 6: Interrupt on successful transmission requested. 384 * 5: Jabber Error (TP Only, TX Reset required. ) 385 * 4: Underrun (TX Reset required. ) 386 * 3: Maximum Collisions. 387 * 2: TX Status Overflow. 388 * 1-0: Undefined. 389 * 390 */ 391 #define TXS_COMPLETE 0x80 392 #define TXS_INTR_REQ 0x40 393 #define TXS_JABBER 0x20 394 #define TXS_UNDERRUN 0x10 395 #define TXS_MAX_COLLISION 0x08 396 #define TXS_STATUS_OVERFLOW 0x04 397 398 /* 399 * RX status 400 * Window 1/Port 0x08. 401 */ 402 #define RX_BYTES_MASK (u_int16_t) (0x07ff) 403 404 /* 405 * Internal Config and MAC control (Window 3) 406 * Window 3 / Port 0: 32-bit internal config register: 407 * bits 0-2: fifo buffer ram size 408 * 3: ram width (word/byte) (ro) 409 * 4-5: ram speed 410 * 6-7: rom size 411 * 8-15: reserved 412 * 413 * 16-17: ram split (5:3, 3:1, or 1:1). 414 * 18-19: reserved 415 * 20-22: selected media type 416 * 21: unused 417 * 24: (nonvolatile) driver should autoselect media 418 * 25-31: reseerved 419 * 420 * The low-order 16 bits should generally not be changed by software. 421 * Offsets defined for two 16-bit words, to help out 16-bit busses. 422 */ 423 #define CONFIG_RAMSIZE (u_int16_t) 0x0007 424 #define CONFIG_RAMSIZE_SHIFT 0 425 426 #define CONFIG_RAMWIDTH (u_int16_t) 0x0008 427 #define CONFIG_RAMWIDTH_SHIFT 3 428 429 #define CONFIG_RAMSPEED (u_int16_t) 0x0030 430 #define CONFIG_RAMSPEED_SHIFT 4 431 #define CONFIG_ROMSIZE (u_int16_t) 0x00c0 432 #define CONFIG_ROMSIZE_SHIFT 6 433 434 /* Window 3/port 2 */ 435 #define CONFIG_RAMSPLIT (u_int16_t) 0x0003 436 #define CONFIG_RAMSPLIT_SHIFT 0 437 #define CONFIG_MEDIAMASK (u_int16_t) 0x0070 438 #define CONFIG_MEDIAMASK_SHIFT 4 439 440 #define CONFIG_AUTOSELECT (u_int16_t) 0x0100 441 #define CONFIG_AUTOSELECT_SHIFT 8 442 443 /* 444 * MAC_CONTROL (Window 3) 445 */ 446 #define MAC_CONTROL_FDX 0x20 /* full-duplex mode */ 447 448 449 /* Active media in INTERNAL_CONFIG media bits */ 450 451 #define ELINKMEDIA_10BASE_T (u_int16_t) 0x00 452 #define ELINKMEDIA_AUI (u_int16_t) 0x01 453 #define ELINKMEDIA_RESV1 (u_int16_t) 0x02 454 #define ELINKMEDIA_10BASE_2 (u_int16_t) 0x03 455 #define ELINKMEDIA_100BASE_TX (u_int16_t) 0x04 456 #define ELINKMEDIA_100BASE_FX (u_int16_t) 0x05 457 #define ELINKMEDIA_MII (u_int16_t) 0x06 458 #define ELINKMEDIA_100BASE_T4 (u_int16_t) 0x07 459 460 461 /* 462 * RESET_OPTIONS (Window 3, on Demon/Vortex/Bomerang only) 463 * also mapped to PCI configuration space on PCI adaptors. 464 * 465 * (same register as Vortex ELINK_W3_RESET_OPTIONS, mapped to pci-config space) 466 */ 467 #define ELINK_PCI_100BASE_T4 (1<<0) 468 #define ELINK_PCI_100BASE_TX (1<<1) 469 #define ELINK_PCI_100BASE_FX (1<<2) 470 #define ELINK_PCI_10BASE_T (1<<3) 471 #define ELINK_PCI_BNC (1<<4) 472 #define ELINK_PCI_AUI (1<<5) 473 #define ELINK_PCI_100BASE_MII (1<<6) 474 #define ELINK_PCI_INTERNAL_VCO (1<<8) 475 476 #define ELINK_PCI_MEDIAMASK (ELINK_PCI_100BASE_T4|ELINK_PCI_100BASE_TX| \ 477 ELINK_PCI_100BASE_FX|ELINK_PCI_10BASE_T| \ 478 ELINK_PCI_BNC|ELINK_PCI_AUI| \ 479 ELINK_PCI_100BASE_MII) 480 481 #define ELINK_RUNNER_MII_RESET 0x4000 482 #define ELINK_RUNNER_ENABLE_MII 0x8000 483 484 /* 485 * FIFO Status (Window 4) 486 * 487 * Supports FIFO diagnostics 488 * 489 * Window 4/Port 0x04.1 490 * 491 * 15: 1=RX receiving (RO). Set when a packet is being received 492 * into the RX FIFO. 493 * 14: Reserved 494 * 13: 1=RX underrun (RO). Generates Adapter Failure interrupt. 495 * Requires RX Reset or Global Reset command to recover. 496 * It is generated when you read past the end of a packet - 497 * reading past what has been received so far will give bad 498 * data. 499 * 12: 1=RX status overrun (RO). Set when there are already 8 500 * packets in the RX FIFO. While this bit is set, no additional 501 * packets are received. Requires no action on the part of 502 * the host. The condition is cleared once a packet has been 503 * read out of the RX FIFO. 504 * 11: 1=RX overrun (RO). Set when the RX FIFO is full (there 505 * may not be an overrun packet yet). While this bit is set, 506 * no additional packets will be received (some additional 507 * bytes can still be pending between the wire and the RX 508 * FIFO). Requires no action on the part of the host. The 509 * condition is cleared once a few bytes have been read out 510 * from the RX FIFO. 511 * 10: 1=TX overrun (RO). Generates adapter failure interrupt. 512 * Requires TX Reset or Global Reset command to recover. 513 * Disables Transmitter. 514 * 9-8: Unassigned. 515 * 7-0: Built in self test bits for the RX and TX FIFO's. 516 */ 517 #define FIFOS_RX_RECEIVING (u_int16_t) 0x8000 518 #define FIFOS_RX_UNDERRUN (u_int16_t) 0x2000 519 #define FIFOS_RX_STATUS_OVERRUN (u_int16_t) 0x1000 520 #define FIFOS_RX_OVERRUN (u_int16_t) 0x0800 521 #define FIFOS_TX_OVERRUN (u_int16_t) 0x0400 522 523 /* 524 * ISA/eisa CONFIG_CNTRL media-present bits. 525 */ 526 #define ELINK_W0_CC_AUI (1<<13) 527 #define ELINK_W0_CC_BNC (1<<12) 528 #define ELINK_W0_CC_UTP (1<<9) 529 #define ELINK_W0_CC_MEDIAMASK (ELINK_W0_CC_AUI|ELINK_W0_CC_BNC| \ 530 ELINK_W0_CC_UTP) 531 532 /* EEPROM state flags/commands */ 533 #define EEPROM_BUSY (1<<15) 534 #define EEPROM_TST_MODE (1<<14) 535 536 #define READ_EEPROM (1<<7) 537 538 /* For the RoadRunner chips... */ 539 #define WRITE_EEPROM_RR 0x100 540 #define READ_EEPROM_RR 0x200 541 #define ERASE_EEPROM_RR 0x300 542 543 /* window 4, MEDIA_STATUS bits */ 544 #define SQE_ENABLE 0x08 /* Enables SQE on AUI ports */ 545 #define JABBER_GUARD_ENABLE 0x40 546 #define LINKBEAT_ENABLE 0x80 547 #define DISABLE_UTP 0x0 548 #define LINKBEAT_DETECT 0x800 549 550 /* 551 * Misc defines for various things. 552 */ 553 #define TAG_ADAPTER 0xd0 554 #define ACTIVATE_ADAPTER_TO_CONFIG 0xff 555 #define ENABLE_DRQ_IRQ 0x0001 556 #define MFG_ID 0x506d /* `TCM' */ 557 #define PROD_ID_3C509 0x5090 /* 509[0-f] */ 558 #define GO_WINDOW(x) bus_space_write_2(sc->sc_iot, \ 559 sc->sc_ioh, ELINK_COMMAND, WINDOW_SELECT|x) 560 561 562 /* Used to probe for large-packet support. */ 563 #define ELINK_LARGEWIN_PROBE ELINK_THRESH_DISABLE 564 #define ELINK_LARGEWIN_MASK 0xffc 565
Indexes created Tue Sep 30 07:10:03 GMT 2025