elink3reg.h revision 1.3
1 /* $NetBSD: elink3reg.h,v 1.3 1996/05/10 05:28:09 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 1995 Herb Peyerl <hpeyerl (at) beer.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Herb Peyerl. 18 * 4. The name of Herb Peyerl may not be used to endorse or promote products 19 * derived from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 */ 33 34 /* 35 * These define the EEPROM data structure. They are used in the probe 36 * function to verify the existance of the adapter after having sent 37 * the ID_Sequence. 38 * 39 * There are others but only the ones we use are defined here. 40 */ 41 #define EEPROM_NODE_ADDR_0 0x0 /* Word */ 42 #define EEPROM_NODE_ADDR_1 0x1 /* Word */ 43 #define EEPROM_NODE_ADDR_2 0x2 /* Word */ 44 #define EEPROM_PROD_ID 0x3 /* 0x9[0-f]50 */ 45 #define EEPROM_MFG_ID 0x7 /* 0x6d50 */ 46 #define EEPROM_ADDR_CFG 0x8 /* Base addr */ 47 #define EEPROM_RESOURCE_CFG 0x9 /* IRQ. Bits 12-15 */ 48 49 /* 50 * These are the registers for the 3Com 3c509 and their bit patterns when 51 * applicable. They have been taken out the the "EtherLink III Parallel 52 * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual 53 * from 3com. 54 */ 55 #define EP_COMMAND 0x0e /* Write. BASE+0x0e is always a command reg. */ 56 #define EP_STATUS 0x0e /* Read. BASE+0x0e is always status reg. */ 57 #define EP_WINDOW 0x0f /* Read. BASE+0x0f is always window reg. */ 58 59 /* 60 * Window 0 registers. Setup. 61 */ 62 /* Write */ 63 #define EP_W0_EEPROM_DATA 0x0c 64 #define EP_W0_EEPROM_COMMAND 0x0a 65 #define EP_W0_RESOURCE_CFG 0x08 66 #define EP_W0_ADDRESS_CFG 0x06 67 #define EP_W0_CONFIG_CTRL 0x04 68 /* Read */ 69 #define EP_W0_PRODUCT_ID 0x02 70 #define EP_W0_MFG_ID 0x00 71 72 /* 73 * Window 1 registers. Operating Set. 74 */ 75 /* Write */ 76 #define EP_W1_TX_PIO_WR_2 0x02 77 #define EP_W1_TX_PIO_WR_1 0x00 78 /* Read */ 79 #define EP_W1_FREE_TX 0x0c 80 #define EP_W1_TX_STATUS 0x0b /* byte */ 81 #define EP_W1_TIMER 0x0a /* byte */ 82 #define EP_W1_RX_STATUS 0x08 83 #define EP_W1_RX_PIO_RD_2 0x02 84 #define EP_W1_RX_PIO_RD_1 0x00 85 86 /* 87 * Window 2 registers. Station Address Setup/Read 88 */ 89 /* Read/Write */ 90 #define EP_W2_ADDR_5 0x05 91 #define EP_W2_ADDR_4 0x04 92 #define EP_W2_ADDR_3 0x03 93 #define EP_W2_ADDR_2 0x02 94 #define EP_W2_ADDR_1 0x01 95 #define EP_W2_ADDR_0 0x00 96 97 /* 98 * Window 3 registers. FIFO Management. 99 */ 100 /* Read */ 101 #define EP_W3_FREE_TX 0x0c 102 #define EP_W3_FREE_RX 0x0a 103 104 /* 105 * Window 4 registers. Diagnostics. 106 */ 107 /* Read/Write */ 108 #define EP_W4_MEDIA_TYPE 0x0a 109 #define EP_W4_CTRLR_STATUS 0x08 110 #define EP_W4_NET_DIAG 0x06 111 #define EP_W4_FIFO_DIAG 0x04 112 #define EP_W4_HOST_DIAG 0x02 113 #define EP_W4_TX_DIAG 0x00 114 115 /* 116 * Window 5 Registers. Results and Internal status. 117 */ 118 /* Read */ 119 #define EP_W5_READ_0_MASK 0x0c 120 #define EP_W5_INTR_MASK 0x0a 121 #define EP_W5_RX_FILTER 0x08 122 #define EP_W5_RX_EARLY_THRESH 0x06 123 #define EP_W5_TX_AVAIL_THRESH 0x02 124 #define EP_W5_TX_START_THRESH 0x00 125 126 /* 127 * Window 6 registers. Statistics. 128 */ 129 /* Read/Write */ 130 #define TX_TOTAL_OK 0x0c 131 #define RX_TOTAL_OK 0x0a 132 #define TX_DEFERRALS 0x08 133 #define RX_FRAMES_OK 0x07 134 #define TX_FRAMES_OK 0x06 135 #define RX_OVERRUNS 0x05 136 #define TX_COLLISIONS 0x04 137 #define TX_AFTER_1_COLLISION 0x03 138 #define TX_AFTER_X_COLLISIONS 0x02 139 #define TX_NO_SQE 0x01 140 #define TX_CD_LOST 0x00 141 142 /* 143 * Register definitions. 144 */ 145 146 /* 147 * Command register. All windows. 148 * 149 * 16 bit register. 150 * 15-11: 5-bit code for command to be executed. 151 * 10-0: 11-bit arg if any. For commands with no args; 152 * this can be set to anything. 153 */ 154 #define GLOBAL_RESET (u_short) 0x0000 /* Wait at least 1ms after issuing */ 155 #define WINDOW_SELECT (u_short) (0x1<<11) 156 #define START_TRANSCEIVER (u_short) (0x2<<11) /* Read ADDR_CFG reg to determine 157 whether this is needed. If so; 158 wait 800 uSec before using trans- 159 ceiver. */ 160 #define RX_DISABLE (u_short) (0x3<<11) /* state disabled on power-up */ 161 #define RX_ENABLE (u_short) (0x4<<11) 162 #define RX_RESET (u_short) (0x5<<11) 163 #define RX_DISCARD_TOP_PACK (u_short) (0x8<<11) 164 #define TX_ENABLE (u_short) (0x9<<11) 165 #define TX_DISABLE (u_short) (0xa<<11) 166 #define TX_RESET (u_short) (0xb<<11) 167 #define REQ_INTR (u_short) (0xc<<11) 168 169 /* 170 * The following C_* acknowledge the various interrupts. 171 * Some of them don't do anything. See the manual. 172 */ 173 #define ACK_INTR (u_short) (0x6800) 174 # define C_INTR_LATCH (u_short) (ACK_INTR|0x01) 175 # define C_CARD_FAILURE (u_short) (ACK_INTR|0x02) 176 # define C_TX_COMPLETE (u_short) (ACK_INTR|0x04) 177 # define C_TX_AVAIL (u_short) (ACK_INTR|0x08) 178 # define C_RX_COMPLETE (u_short) (ACK_INTR|0x10) 179 # define C_RX_EARLY (u_short) (ACK_INTR|0x20) 180 # define C_INT_RQD (u_short) (ACK_INTR|0x40) 181 # define C_UPD_STATS (u_short) (ACK_INTR|0x80) 182 #define SET_INTR_MASK (u_short) (0x0e<<11) 183 #define SET_RD_0_MASK (u_short) (0x0f<<11) 184 #define SET_RX_FILTER (u_short) (0x10<<11) 185 # define FIL_INDIVIDUAL (u_short) (0x01) 186 # define FIL_MULTICAST (u_short) (0x02) 187 # define FIL_BRDCST (u_short) (0x04) 188 # define FIL_PROMISC (u_short) (0x08) 189 #define SET_RX_EARLY_THRESH (u_short) (0x11<<11) 190 #define SET_TX_AVAIL_THRESH (u_short) (0x12<<11) 191 #define SET_TX_START_THRESH (u_short) (0x13<<11) 192 #define STATS_ENABLE (u_short) (0x15<<11) 193 #define STATS_DISABLE (u_short) (0x16<<11) 194 #define STOP_TRANSCEIVER (u_short) (0x17<<11) 195 196 /* 197 * Status register. All windows. 198 * 199 * 15-13: Window number(0-7). 200 * 12: Command_in_progress. 201 * 11: reserved. 202 * 10: reserved. 203 * 9: reserved. 204 * 8: reserved. 205 * 7: Update Statistics. 206 * 6: Interrupt Requested. 207 * 5: RX Early. 208 * 4: RX Complete. 209 * 3: TX Available. 210 * 2: TX Complete. 211 * 1: Adapter Failure. 212 * 0: Interrupt Latch. 213 */ 214 #define S_INTR_LATCH (u_short) (0x0001) 215 #define S_CARD_FAILURE (u_short) (0x0002) 216 #define S_TX_COMPLETE (u_short) (0x0004) 217 #define S_TX_AVAIL (u_short) (0x0008) 218 #define S_RX_COMPLETE (u_short) (0x0010) 219 #define S_RX_EARLY (u_short) (0x0020) 220 #define S_INT_RQD (u_short) (0x0040) 221 #define S_UPD_STATS (u_short) (0x0080) 222 #define S_COMMAND_IN_PROGRESS (u_short) (0x1000) 223 224 /* 225 * FIFO Registers. RX Status. 226 * 227 * 15: Incomplete or FIFO empty. 228 * 14: 1: Error in RX Packet 0: Incomplete or no error. 229 * 14-11: Type of error. [14-11] 230 * 1000 = Overrun. 231 * 1011 = Run Packet Error. 232 * 1100 = Alignment Error. 233 * 1101 = CRC Error. 234 * 1001 = Oversize Packet Error (>1514 bytes) 235 * 0010 = Dribble Bits. 236 * (all other error codes, no errors.) 237 * 238 * 10-0: RX Bytes (0-1514) 239 */ 240 #define ERR_INCOMPLETE (u_short) (0x8000) 241 #define ERR_RX (u_short) (0x4000) 242 #define ERR_MASK (u_short) (0x7800) 243 #define ERR_OVERRUN (u_short) (0x4000) 244 #define ERR_RUNT (u_short) (0x5800) 245 #define ERR_ALIGNMENT (u_short) (0x6000) 246 #define ERR_CRC (u_short) (0x6800) 247 #define ERR_OVERSIZE (u_short) (0x4800) 248 #define ERR_DRIBBLE (u_short) (0x1000) 249 250 /* 251 * TX Status 252 * 253 * Reports the transmit status of a completed transmission. Writing this 254 * register pops the transmit completion stack. 255 * 256 * Window 1/Port 0x0b. 257 * 258 * 7: Complete 259 * 6: Interrupt on successful transmission requested. 260 * 5: Jabber Error (TP Only, TX Reset required. ) 261 * 4: Underrun (TX Reset required. ) 262 * 3: Maximum Collisions. 263 * 2: TX Status Overflow. 264 * 1-0: Undefined. 265 * 266 */ 267 #define TXS_COMPLETE 0x80 268 #define TXS_INTR_REQ 0x40 269 #define TXS_JABBER 0x20 270 #define TXS_UNDERRUN 0x10 271 #define TXS_MAX_COLLISION 0x08 272 #define TXS_STATUS_OVERFLOW 0x04 273 274 /* 275 * FIFO Status (Window 4) 276 * 277 * Supports FIFO diagnostics 278 * 279 * Window 4/Port 0x04.1 280 * 281 * 15: 1=RX receiving (RO). Set when a packet is being received 282 * into the RX FIFO. 283 * 14: Reserved 284 * 13: 1=RX underrun (RO). Generates Adapter Failure interrupt. 285 * Requires RX Reset or Global Reset command to recover. 286 * It is generated when you read past the end of a packet - 287 * reading past what has been received so far will give bad 288 * data. 289 * 12: 1=RX status overrun (RO). Set when there are already 8 290 * packets in the RX FIFO. While this bit is set, no additional 291 * packets are received. Requires no action on the part of 292 * the host. The condition is cleared once a packet has been 293 * read out of the RX FIFO. 294 * 11: 1=RX overrun (RO). Set when the RX FIFO is full (there 295 * may not be an overrun packet yet). While this bit is set, 296 * no additional packets will be received (some additional 297 * bytes can still be pending between the wire and the RX 298 * FIFO). Requires no action on the part of the host. The 299 * condition is cleared once a few bytes have been read out 300 * from the RX FIFO. 301 * 10: 1=TX overrun (RO). Generates adapter failure interrupt. 302 * Requires TX Reset or Global Reset command to recover. 303 * Disables Transmitter. 304 * 9-8: Unassigned. 305 * 7-0: Built in self test bits for the RX and TX FIFO's. 306 */ 307 #define FIFOS_RX_RECEIVING (u_short) 0x8000 308 #define FIFOS_RX_UNDERRUN (u_short) 0x2000 309 #define FIFOS_RX_STATUS_OVERRUN (u_short) 0x1000 310 #define FIFOS_RX_OVERRUN (u_short) 0x0800 311 #define FIFOS_TX_OVERRUN (u_short) 0x0400 312 313 /* 314 * Misc defines for various things. 315 */ 316 #define TAG_ADAPTER 0xd0 317 #define ACTIVATE_ADAPTER_TO_CONFIG 0xff 318 #define ENABLE_DRQ_IRQ 0x0001 319 #define MFG_ID 0x506d /* `TCM' */ 320 #define PROD_ID 0x5090 321 #define GO_WINDOW(x) bus_io_write_2(sc->sc_bc, \ 322 sc->sc_ioh, EP_COMMAND, WINDOW_SELECT|x) 323 #define AUI 0x1 324 #define BNC 0x2 325 #define UTP 0x4 326 #define IS_AUI (1<<13) 327 #define IS_BNC (1<<12) 328 #define IS_UTP (1<<9) 329 #define EEPROM_BUSY (1<<15) 330 #define EEPROM_TST_MODE (1<<14) 331 #define READ_EEPROM (1<<7) 332 #define ENABLE_UTP 0xc0 333 #define DISABLE_UTP 0x0 334 #define RX_BYTES_MASK (u_short) (0x07ff) 335 336 #define IS_PCI_AUI (1<<5) 337 #define IS_PCI_BNC (1<<4) 338 #define IS_PCI_UTP (1<<3) 339
Indexes created Mon Sep 29 21:09:56 GMT 2025