elinkxl.c revision 1.105.8.1
1 /* $NetBSD: elinkxl.c,v 1.105.8.1 2009/01/19 13:17:55 skrll Exp $ */ 2 3 /*- 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Frank van der Linden. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 __KERNEL_RCSID(0, "$NetBSD: elinkxl.c,v 1.105.8.1 2009/01/19 13:17:55 skrll Exp $"); 34 35 #include "bpfilter.h" 36 #include "rnd.h" 37 38 #include <sys/param.h> 39 #include <sys/systm.h> 40 #include <sys/callout.h> 41 #include <sys/kernel.h> 42 #include <sys/mbuf.h> 43 #include <sys/socket.h> 44 #include <sys/ioctl.h> 45 #include <sys/errno.h> 46 #include <sys/syslog.h> 47 #include <sys/select.h> 48 #include <sys/device.h> 49 #if NRND > 0 50 #include <sys/rnd.h> 51 #endif 52 53 #include <uvm/uvm_extern.h> 54 55 #include <net/if.h> 56 #include <net/if_dl.h> 57 #include <net/if_ether.h> 58 #include <net/if_media.h> 59 60 #if NBPFILTER > 0 61 #include <net/bpf.h> 62 #include <net/bpfdesc.h> 63 #endif 64 65 #include <sys/cpu.h> 66 #include <sys/bus.h> 67 #include <sys/intr.h> 68 #include <machine/endian.h> 69 70 #include <dev/mii/miivar.h> 71 #include <dev/mii/mii.h> 72 #include <dev/mii/mii_bitbang.h> 73 74 #include <dev/ic/elink3reg.h> 75 /* #include <dev/ic/elink3var.h> */ 76 #include <dev/ic/elinkxlreg.h> 77 #include <dev/ic/elinkxlvar.h> 78 79 #ifdef DEBUG 80 int exdebug = 0; 81 #endif 82 83 /* ifmedia callbacks */ 84 int ex_media_chg(struct ifnet *ifp); 85 void ex_media_stat(struct ifnet *ifp, struct ifmediareq *req); 86 87 static int ex_ifflags_cb(struct ethercom *); 88 89 void ex_probe_media(struct ex_softc *); 90 void ex_set_filter(struct ex_softc *); 91 void ex_set_media(struct ex_softc *); 92 void ex_set_xcvr(struct ex_softc *, uint16_t); 93 struct mbuf *ex_get(struct ex_softc *, int); 94 uint16_t ex_read_eeprom(struct ex_softc *, int); 95 int ex_init(struct ifnet *); 96 void ex_read(struct ex_softc *); 97 void ex_reset(struct ex_softc *); 98 void ex_set_mc(struct ex_softc *); 99 void ex_getstats(struct ex_softc *); 100 void ex_printstats(struct ex_softc *); 101 void ex_tick(void *); 102 103 static int ex_eeprom_busy(struct ex_softc *); 104 static int ex_add_rxbuf(struct ex_softc *, struct ex_rxdesc *); 105 static void ex_init_txdescs(struct ex_softc *); 106 107 static void ex_setup_tx(struct ex_softc *); 108 static bool ex_shutdown(device_t, int); 109 static void ex_start(struct ifnet *); 110 static void ex_txstat(struct ex_softc *); 111 112 int ex_mii_readreg(device_t, int, int); 113 void ex_mii_writereg(device_t, int, int, int); 114 void ex_mii_statchg(device_t); 115 116 void ex_probemedia(struct ex_softc *); 117 118 /* 119 * Structure to map media-present bits in boards to ifmedia codes and 120 * printable media names. Used for table-driven ifmedia initialization. 121 */ 122 struct ex_media { 123 int exm_mpbit; /* media present bit */ 124 const char *exm_name; /* name of medium */ 125 int exm_ifmedia; /* ifmedia word for medium */ 126 int exm_epmedia; /* ELINKMEDIA_* constant */ 127 }; 128 129 /* 130 * Media table for 3c90x chips. Note that chips with MII have no 131 * `native' media. 132 */ 133 struct ex_media ex_native_media[] = { 134 { ELINK_PCI_10BASE_T, "10baseT", IFM_ETHER|IFM_10_T, 135 ELINKMEDIA_10BASE_T }, 136 { ELINK_PCI_10BASE_T, "10baseT-FDX", IFM_ETHER|IFM_10_T|IFM_FDX, 137 ELINKMEDIA_10BASE_T }, 138 { ELINK_PCI_AUI, "10base5", IFM_ETHER|IFM_10_5, 139 ELINKMEDIA_AUI }, 140 { ELINK_PCI_BNC, "10base2", IFM_ETHER|IFM_10_2, 141 ELINKMEDIA_10BASE_2 }, 142 { ELINK_PCI_100BASE_TX, "100baseTX", IFM_ETHER|IFM_100_TX, 143 ELINKMEDIA_100BASE_TX }, 144 { ELINK_PCI_100BASE_TX, "100baseTX-FDX",IFM_ETHER|IFM_100_TX|IFM_FDX, 145 ELINKMEDIA_100BASE_TX }, 146 { ELINK_PCI_100BASE_FX, "100baseFX", IFM_ETHER|IFM_100_FX, 147 ELINKMEDIA_100BASE_FX }, 148 { ELINK_PCI_100BASE_MII,"manual", IFM_ETHER|IFM_MANUAL, 149 ELINKMEDIA_MII }, 150 { ELINK_PCI_100BASE_T4, "100baseT4", IFM_ETHER|IFM_100_T4, 151 ELINKMEDIA_100BASE_T4 }, 152 { 0, NULL, 0, 153 0 }, 154 }; 155 156 /* 157 * MII bit-bang glue. 158 */ 159 uint32_t ex_mii_bitbang_read(device_t); 160 void ex_mii_bitbang_write(device_t, uint32_t); 161 162 const struct mii_bitbang_ops ex_mii_bitbang_ops = { 163 ex_mii_bitbang_read, 164 ex_mii_bitbang_write, 165 { 166 ELINK_PHY_DATA, /* MII_BIT_MDO */ 167 ELINK_PHY_DATA, /* MII_BIT_MDI */ 168 ELINK_PHY_CLK, /* MII_BIT_MDC */ 169 ELINK_PHY_DIR, /* MII_BIT_DIR_HOST_PHY */ 170 0, /* MII_BIT_DIR_PHY_HOST */ 171 } 172 }; 173 174 /* 175 * Back-end attach and configure. 176 */ 177 void 178 ex_config(struct ex_softc *sc) 179 { 180 struct ifnet *ifp; 181 uint16_t val; 182 uint8_t macaddr[ETHER_ADDR_LEN] = {0}; 183 bus_space_tag_t iot = sc->sc_iot; 184 bus_space_handle_t ioh = sc->sc_ioh; 185 int i, error, attach_stage; 186 187 callout_init(&sc->ex_mii_callout, 0); 188 189 ex_reset(sc); 190 191 val = ex_read_eeprom(sc, EEPROM_OEM_ADDR0); 192 macaddr[0] = val >> 8; 193 macaddr[1] = val & 0xff; 194 val = ex_read_eeprom(sc, EEPROM_OEM_ADDR1); 195 macaddr[2] = val >> 8; 196 macaddr[3] = val & 0xff; 197 val = ex_read_eeprom(sc, EEPROM_OEM_ADDR2); 198 macaddr[4] = val >> 8; 199 macaddr[5] = val & 0xff; 200 201 aprint_normal_dev(sc->sc_dev, "MAC address %s\n", ether_sprintf(macaddr)); 202 203 if (sc->ex_conf & (EX_CONF_INV_LED_POLARITY|EX_CONF_PHY_POWER)) { 204 GO_WINDOW(2); 205 val = bus_space_read_2(iot, ioh, ELINK_W2_RESET_OPTIONS); 206 if (sc->ex_conf & EX_CONF_INV_LED_POLARITY) 207 val |= ELINK_RESET_OPT_LEDPOLAR; 208 if (sc->ex_conf & EX_CONF_PHY_POWER) 209 val |= ELINK_RESET_OPT_PHYPOWER; 210 bus_space_write_2(iot, ioh, ELINK_W2_RESET_OPTIONS, val); 211 } 212 if (sc->ex_conf & EX_CONF_NO_XCVR_PWR) { 213 GO_WINDOW(0); 214 bus_space_write_2(iot, ioh, ELINK_W0_MFG_ID, 215 EX_XCVR_PWR_MAGICBITS); 216 } 217 218 attach_stage = 0; 219 220 /* 221 * Allocate the upload descriptors, and create and load the DMA 222 * map for them. 223 */ 224 if ((error = bus_dmamem_alloc(sc->sc_dmat, 225 EX_NUPD * sizeof (struct ex_upd), PAGE_SIZE, 0, &sc->sc_useg, 1, 226 &sc->sc_urseg, BUS_DMA_NOWAIT)) != 0) { 227 aprint_error_dev(sc->sc_dev, 228 "can't allocate upload descriptors, error = %d\n", error); 229 goto fail; 230 } 231 232 attach_stage = 1; 233 234 if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg, 235 EX_NUPD * sizeof (struct ex_upd), (void **)&sc->sc_upd, 236 BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { 237 aprint_error_dev(sc->sc_dev, 238 "can't map upload descriptors, error = %d\n", error); 239 goto fail; 240 } 241 242 attach_stage = 2; 243 244 if ((error = bus_dmamap_create(sc->sc_dmat, 245 EX_NUPD * sizeof (struct ex_upd), 1, 246 EX_NUPD * sizeof (struct ex_upd), 0, BUS_DMA_NOWAIT, 247 &sc->sc_upd_dmamap)) != 0) { 248 aprint_error_dev(sc->sc_dev, 249 "can't create upload desc. DMA map, error = %d\n", error); 250 goto fail; 251 } 252 253 attach_stage = 3; 254 255 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_upd_dmamap, 256 sc->sc_upd, EX_NUPD * sizeof (struct ex_upd), NULL, 257 BUS_DMA_NOWAIT)) != 0) { 258 aprint_error_dev(sc->sc_dev, 259 "can't load upload desc. DMA map, error = %d\n", error); 260 goto fail; 261 } 262 263 attach_stage = 4; 264 265 /* 266 * Allocate the download descriptors, and create and load the DMA 267 * map for them. 268 */ 269 if ((error = bus_dmamem_alloc(sc->sc_dmat, 270 DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, PAGE_SIZE, 0, &sc->sc_dseg, 1, 271 &sc->sc_drseg, BUS_DMA_NOWAIT)) != 0) { 272 aprint_error_dev(sc->sc_dev, 273 "can't allocate download descriptors, error = %d\n", error); 274 goto fail; 275 } 276 277 attach_stage = 5; 278 279 if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg, 280 DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, (void **)&sc->sc_dpd, 281 BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { 282 aprint_error_dev(sc->sc_dev, 283 "can't map download descriptors, error = %d\n", error); 284 goto fail; 285 } 286 memset(sc->sc_dpd, 0, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN); 287 288 attach_stage = 6; 289 290 if ((error = bus_dmamap_create(sc->sc_dmat, 291 DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, 1, 292 DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, 0, BUS_DMA_NOWAIT, 293 &sc->sc_dpd_dmamap)) != 0) { 294 aprint_error_dev(sc->sc_dev, 295 "can't create download desc. DMA map, error = %d\n", error); 296 goto fail; 297 } 298 299 attach_stage = 7; 300 301 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dpd_dmamap, 302 sc->sc_dpd, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, NULL, 303 BUS_DMA_NOWAIT)) != 0) { 304 aprint_error_dev(sc->sc_dev, 305 "can't load download desc. DMA map, error = %d\n", error); 306 goto fail; 307 } 308 bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, 309 DPDMEMPAD_OFF, EX_IP4CSUMTX_PADLEN, BUS_DMASYNC_PREWRITE); 310 311 attach_stage = 8; 312 313 314 /* 315 * Create the transmit buffer DMA maps. 316 */ 317 for (i = 0; i < EX_NDPD; i++) { 318 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 319 EX_NTFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT, 320 &sc->sc_tx_dmamaps[i])) != 0) { 321 aprint_error_dev(sc->sc_dev, 322 "can't create tx DMA map %d, error = %d\n", 323 i, error); 324 goto fail; 325 } 326 } 327 328 attach_stage = 9; 329 330 /* 331 * Create the receive buffer DMA maps. 332 */ 333 for (i = 0; i < EX_NUPD; i++) { 334 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 335 EX_NRFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT, 336 &sc->sc_rx_dmamaps[i])) != 0) { 337 aprint_error_dev(sc->sc_dev, 338 "can't create rx DMA map %d, error = %d\n", 339 i, error); 340 goto fail; 341 } 342 } 343 344 attach_stage = 10; 345 346 /* 347 * Create ring of upload descriptors, only once. The DMA engine 348 * will loop over this when receiving packets, stalling if it 349 * hits an UPD with a finished receive. 350 */ 351 for (i = 0; i < EX_NUPD; i++) { 352 sc->sc_rxdescs[i].rx_dmamap = sc->sc_rx_dmamaps[i]; 353 sc->sc_rxdescs[i].rx_upd = &sc->sc_upd[i]; 354 sc->sc_upd[i].upd_frags[0].fr_len = 355 htole32((MCLBYTES - 2) | EX_FR_LAST); 356 if (ex_add_rxbuf(sc, &sc->sc_rxdescs[i]) != 0) { 357 aprint_error_dev(sc->sc_dev, 358 "can't allocate or map rx buffers\n"); 359 goto fail; 360 } 361 } 362 363 bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, 0, 364 EX_NUPD * sizeof (struct ex_upd), 365 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 366 367 ex_init_txdescs(sc); 368 369 attach_stage = 11; 370 371 372 GO_WINDOW(3); 373 val = bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS); 374 if (val & ELINK_MEDIACAP_MII) 375 sc->ex_conf |= EX_CONF_MII; 376 377 ifp = &sc->sc_ethercom.ec_if; 378 379 /* 380 * Initialize our media structures and MII info. We'll 381 * probe the MII if we discover that we have one. 382 */ 383 sc->ex_mii.mii_ifp = ifp; 384 sc->ex_mii.mii_readreg = ex_mii_readreg; 385 sc->ex_mii.mii_writereg = ex_mii_writereg; 386 sc->ex_mii.mii_statchg = ex_mii_statchg; 387 ifmedia_init(&sc->ex_mii.mii_media, IFM_IMASK, ex_media_chg, 388 ex_media_stat); 389 390 if (sc->ex_conf & EX_CONF_MII) { 391 /* 392 * Find PHY, extract media information from it. 393 * First, select the right transceiver. 394 */ 395 ex_set_xcvr(sc, val); 396 397 mii_attach(sc->sc_dev, &sc->ex_mii, 0xffffffff, 398 MII_PHY_ANY, MII_OFFSET_ANY, 0); 399 if (LIST_FIRST(&sc->ex_mii.mii_phys) == NULL) { 400 ifmedia_add(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE, 401 0, NULL); 402 ifmedia_set(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE); 403 } else { 404 ifmedia_set(&sc->ex_mii.mii_media, IFM_ETHER|IFM_AUTO); 405 } 406 } else 407 ex_probemedia(sc); 408 409 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 410 ifp->if_softc = sc; 411 ifp->if_start = ex_start; 412 ifp->if_ioctl = ex_ioctl; 413 ifp->if_watchdog = ex_watchdog; 414 ifp->if_init = ex_init; 415 ifp->if_stop = ex_stop; 416 ifp->if_flags = 417 IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST; 418 sc->sc_if_flags = ifp->if_flags; 419 IFQ_SET_READY(&ifp->if_snd); 420 421 /* 422 * We can support 802.1Q VLAN-sized frames. 423 */ 424 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 425 426 /* 427 * The 3c90xB has hardware IPv4/TCPv4/UDPv4 checksum support. 428 */ 429 if (sc->ex_conf & EX_CONF_90XB) 430 sc->sc_ethercom.ec_if.if_capabilities |= 431 IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | 432 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 433 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx; 434 435 if_attach(ifp); 436 ether_ifattach(ifp, macaddr); 437 ether_set_ifflags_cb(&sc->sc_ethercom, ex_ifflags_cb); 438 439 GO_WINDOW(1); 440 441 sc->tx_start_thresh = 20; 442 sc->tx_succ_ok = 0; 443 444 /* TODO: set queues to 0 */ 445 446 #if NRND > 0 447 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 448 RND_TYPE_NET, 0); 449 #endif 450 451 if (!pmf_device_register1(sc->sc_dev, NULL, NULL, ex_shutdown)) 452 aprint_error_dev(sc->sc_dev, "couldn't establish power handler\n"); 453 else 454 pmf_class_network_register(sc->sc_dev, &sc->sc_ethercom.ec_if); 455 456 /* The attach is successful. */ 457 sc->ex_flags |= EX_FLAGS_ATTACHED; 458 return; 459 460 fail: 461 /* 462 * Free any resources we've allocated during the failed attach 463 * attempt. Do this in reverse order and fall though. 464 */ 465 switch (attach_stage) { 466 case 11: 467 { 468 struct ex_rxdesc *rxd; 469 470 for (i = 0; i < EX_NUPD; i++) { 471 rxd = &sc->sc_rxdescs[i]; 472 if (rxd->rx_mbhead != NULL) { 473 bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap); 474 m_freem(rxd->rx_mbhead); 475 } 476 } 477 } 478 /* FALLTHROUGH */ 479 480 case 10: 481 for (i = 0; i < EX_NUPD; i++) 482 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rx_dmamaps[i]); 483 /* FALLTHROUGH */ 484 485 case 9: 486 for (i = 0; i < EX_NDPD; i++) 487 bus_dmamap_destroy(sc->sc_dmat, sc->sc_tx_dmamaps[i]); 488 /* FALLTHROUGH */ 489 case 8: 490 bus_dmamap_unload(sc->sc_dmat, sc->sc_dpd_dmamap); 491 /* FALLTHROUGH */ 492 493 case 7: 494 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dpd_dmamap); 495 /* FALLTHROUGH */ 496 497 case 6: 498 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_dpd, 499 EX_NDPD * sizeof (struct ex_dpd)); 500 /* FALLTHROUGH */ 501 502 case 5: 503 bus_dmamem_free(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg); 504 break; 505 506 case 4: 507 bus_dmamap_unload(sc->sc_dmat, sc->sc_upd_dmamap); 508 /* FALLTHROUGH */ 509 510 case 3: 511 bus_dmamap_destroy(sc->sc_dmat, sc->sc_upd_dmamap); 512 /* FALLTHROUGH */ 513 514 case 2: 515 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_upd, 516 EX_NUPD * sizeof (struct ex_upd)); 517 /* FALLTHROUGH */ 518 519 case 1: 520 bus_dmamem_free(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg); 521 break; 522 } 523 524 } 525 526 /* 527 * Find the media present on non-MII chips. 528 */ 529 void 530 ex_probemedia(struct ex_softc *sc) 531 { 532 bus_space_tag_t iot = sc->sc_iot; 533 bus_space_handle_t ioh = sc->sc_ioh; 534 struct ifmedia *ifm = &sc->ex_mii.mii_media; 535 struct ex_media *exm; 536 uint16_t config1, reset_options, default_media; 537 int defmedia = 0; 538 const char *sep = "", *defmedianame = NULL; 539 540 GO_WINDOW(3); 541 config1 = bus_space_read_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2); 542 reset_options = bus_space_read_1(iot, ioh, ELINK_W3_RESET_OPTIONS); 543 GO_WINDOW(0); 544 545 default_media = (config1 & CONFIG_MEDIAMASK) >> CONFIG_MEDIAMASK_SHIFT; 546 547 /* Sanity check that there are any media! */ 548 if ((reset_options & ELINK_PCI_MEDIAMASK) == 0) { 549 aprint_error_dev(sc->sc_dev, "no media present!\n"); 550 ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL); 551 ifmedia_set(ifm, IFM_ETHER|IFM_NONE); 552 return; 553 } 554 555 aprint_normal_dev(sc->sc_dev, ""); 556 557 #define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", " 558 559 for (exm = ex_native_media; exm->exm_name != NULL; exm++) { 560 if (reset_options & exm->exm_mpbit) { 561 /* 562 * Default media is a little complicated. We 563 * support full-duplex which uses the same 564 * reset options bit. 565 * 566 * XXX Check EEPROM for default to FDX? 567 */ 568 if (exm->exm_epmedia == default_media) { 569 if ((exm->exm_ifmedia & IFM_FDX) == 0) { 570 defmedia = exm->exm_ifmedia; 571 defmedianame = exm->exm_name; 572 } 573 } else if (defmedia == 0) { 574 defmedia = exm->exm_ifmedia; 575 defmedianame = exm->exm_name; 576 } 577 ifmedia_add(ifm, exm->exm_ifmedia, exm->exm_epmedia, 578 NULL); 579 PRINT(exm->exm_name); 580 } 581 } 582 583 #undef PRINT 584 585 #ifdef DIAGNOSTIC 586 if (defmedia == 0) 587 panic("ex_probemedia: impossible"); 588 #endif 589 590 aprint_normal(", default %s\n", defmedianame); 591 ifmedia_set(ifm, defmedia); 592 } 593 594 /* 595 * Setup transmitter parameters. 596 */ 597 static void 598 ex_setup_tx(struct ex_softc *sc) 599 { 600 bus_space_tag_t iot = sc->sc_iot; 601 bus_space_handle_t ioh = sc->sc_ioh; 602 603 /* 604 * Disable reclaim threshold for 90xB, set free threshold to 605 * 6 * 256 = 1536 for 90x. 606 */ 607 if (sc->ex_conf & EX_CONF_90XB) 608 bus_space_write_2(iot, ioh, ELINK_COMMAND, 609 ELINK_TXRECLTHRESH | 255); 610 else 611 bus_space_write_1(iot, ioh, ELINK_TXFREETHRESH, 6); 612 613 /* Setup early transmission start threshold. */ 614 bus_space_write_2(iot, ioh, ELINK_COMMAND, 615 ELINK_TXSTARTTHRESH | sc->tx_start_thresh); 616 } 617 618 /* 619 * Bring device up. 620 */ 621 int 622 ex_init(struct ifnet *ifp) 623 { 624 struct ex_softc *sc = ifp->if_softc; 625 bus_space_tag_t iot = sc->sc_iot; 626 bus_space_handle_t ioh = sc->sc_ioh; 627 int i; 628 uint16_t val; 629 int error = 0; 630 631 if ((error = ex_enable(sc)) != 0) 632 goto out; 633 634 ex_waitcmd(sc); 635 ex_stop(ifp, 0); 636 637 GO_WINDOW(2); 638 639 /* Turn on PHY power. */ 640 if (sc->ex_conf & (EX_CONF_PHY_POWER | EX_CONF_INV_LED_POLARITY)) { 641 val = bus_space_read_2(iot, ioh, ELINK_W2_RESET_OPTIONS); 642 if (sc->ex_conf & EX_CONF_PHY_POWER) 643 val |= ELINK_RESET_OPT_PHYPOWER; /* turn on PHY power */ 644 if (sc->ex_conf & EX_CONF_INV_LED_POLARITY) 645 val |= ELINK_RESET_OPT_LEDPOLAR; /* invert LED polarity */ 646 bus_space_write_2(iot, ioh, ELINK_W2_RESET_OPTIONS, val); 647 } 648 649 /* 650 * Set the station address and clear the station mask. The latter 651 * is needed for 90x cards, 0 is the default for 90xB cards. 652 */ 653 for (i = 0; i < ETHER_ADDR_LEN; i++) { 654 bus_space_write_1(iot, ioh, ELINK_W2_ADDR_0 + i, 655 CLLADDR(ifp->if_sadl)[i]); 656 bus_space_write_1(iot, ioh, ELINK_W2_RECVMASK_0 + i, 0); 657 } 658 659 GO_WINDOW(3); 660 661 bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_RESET); 662 ex_waitcmd(sc); 663 bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_RESET); 664 ex_waitcmd(sc); 665 666 /* Load Tx parameters. */ 667 ex_setup_tx(sc); 668 669 bus_space_write_2(iot, ioh, ELINK_COMMAND, 670 SET_RX_EARLY_THRESH | ELINK_THRESH_DISABLE); 671 672 bus_space_write_4(iot, ioh, ELINK_DMACTRL, 673 bus_space_read_4(iot, ioh, ELINK_DMACTRL) | ELINK_DMAC_UPRXEAREN); 674 675 bus_space_write_2(iot, ioh, ELINK_COMMAND, 676 SET_RD_0_MASK | XL_WATCHED_INTERRUPTS); 677 bus_space_write_2(iot, ioh, ELINK_COMMAND, 678 SET_INTR_MASK | XL_WATCHED_INTERRUPTS); 679 680 bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | 0xff); 681 if (sc->intr_ack) 682 (* sc->intr_ack)(sc); 683 ex_set_media(sc); 684 ex_set_mc(sc); 685 686 687 bus_space_write_2(iot, ioh, ELINK_COMMAND, STATS_ENABLE); 688 bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE); 689 bus_space_write_4(iot, ioh, ELINK_UPLISTPTR, sc->sc_upddma); 690 bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_ENABLE); 691 bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_UPUNSTALL); 692 693 ifp->if_flags |= IFF_RUNNING; 694 ifp->if_flags &= ~IFF_OACTIVE; 695 ex_start(ifp); 696 sc->sc_if_flags = ifp->if_flags; 697 698 GO_WINDOW(1); 699 700 callout_reset(&sc->ex_mii_callout, hz, ex_tick, sc); 701 702 out: 703 if (error) { 704 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 705 ifp->if_timer = 0; 706 aprint_error_dev(sc->sc_dev, "interface not running\n"); 707 } 708 return (error); 709 } 710 711 #define MCHASHSIZE 256 712 #define ex_mchash(addr) (ether_crc32_be((addr), ETHER_ADDR_LEN) & \ 713 (MCHASHSIZE - 1)) 714 715 /* 716 * Set multicast receive filter. Also take care of promiscuous mode 717 * here (XXX). 718 */ 719 void 720 ex_set_mc(struct ex_softc *sc) 721 { 722 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 723 struct ethercom *ec = &sc->sc_ethercom; 724 struct ether_multi *enm; 725 struct ether_multistep estep; 726 int i; 727 uint16_t mask = FIL_INDIVIDUAL | FIL_BRDCST; 728 729 if (ifp->if_flags & IFF_PROMISC) { 730 mask |= FIL_PROMISC; 731 goto allmulti; 732 } 733 734 ETHER_FIRST_MULTI(estep, ec, enm); 735 if (enm == NULL) 736 goto nomulti; 737 738 if ((sc->ex_conf & EX_CONF_90XB) == 0) 739 /* No multicast hash filtering. */ 740 goto allmulti; 741 742 for (i = 0; i < MCHASHSIZE; i++) 743 bus_space_write_2(sc->sc_iot, sc->sc_ioh, 744 ELINK_COMMAND, ELINK_CLEARHASHFILBIT | i); 745 746 do { 747 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 748 ETHER_ADDR_LEN) != 0) 749 goto allmulti; 750 751 i = ex_mchash(enm->enm_addrlo); 752 bus_space_write_2(sc->sc_iot, sc->sc_ioh, 753 ELINK_COMMAND, ELINK_SETHASHFILBIT | i); 754 ETHER_NEXT_MULTI(estep, enm); 755 } while (enm != NULL); 756 mask |= FIL_MULTIHASH; 757 758 nomulti: 759 ifp->if_flags &= ~IFF_ALLMULTI; 760 bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, 761 SET_RX_FILTER | mask); 762 return; 763 764 allmulti: 765 ifp->if_flags |= IFF_ALLMULTI; 766 mask |= FIL_MULTICAST; 767 bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, 768 SET_RX_FILTER | mask); 769 } 770 771 772 /* 773 * The Tx Complete interrupts occur only on errors, 774 * and this is the error handler. 775 */ 776 static void 777 ex_txstat(struct ex_softc *sc) 778 { 779 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 780 bus_space_tag_t iot = sc->sc_iot; 781 bus_space_handle_t ioh = sc->sc_ioh; 782 int i, err = 0; 783 784 /* 785 * We need to read+write TX_STATUS until we get a 0 status 786 * in order to turn off the interrupt flag. 787 * ELINK_TXSTATUS is in the upper byte of 2 with ELINK_TIMER. 788 */ 789 for (;;) { 790 i = bus_space_read_2(iot, ioh, ELINK_TIMER); 791 if ((i & TXS_COMPLETE) == 0) 792 break; 793 bus_space_write_2(iot, ioh, ELINK_TIMER, 0x0); 794 err |= i; 795 } 796 err &= ~TXS_TIMER; 797 798 if ((err & (TXS_UNDERRUN | TXS_JABBER | TXS_RECLAIM)) 799 || err == 0 /* should not happen, just in case */) { 800 /* 801 * Make sure the transmission is stopped. 802 */ 803 bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_DNSTALL); 804 for (i = 1000; i > 0; i--) 805 if ((bus_space_read_4(iot, ioh, ELINK_DMACTRL) & 806 ELINK_DMAC_DNINPROG) == 0) 807 break; 808 809 /* 810 * Reset the transmitter. 811 */ 812 bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_RESET); 813 814 /* Resetting takes a while and we will do more than wait. */ 815 816 ifp->if_flags &= ~IFF_OACTIVE; 817 ++sc->sc_ethercom.ec_if.if_oerrors; 818 aprint_error_dev(sc->sc_dev, "%s%s%s", 819 (err & TXS_UNDERRUN) ? " transmit underrun" : "", 820 (err & TXS_JABBER) ? " jabber" : "", 821 (err & TXS_RECLAIM) ? " reclaim" : ""); 822 if (err == 0) 823 aprint_error(" unknown Tx error"); 824 printf(" (%x)", err); 825 if (err & TXS_UNDERRUN) { 826 aprint_error(" @%d", sc->tx_start_thresh); 827 if (sc->tx_succ_ok < 256 && 828 (i = min(ETHER_MAX_LEN, sc->tx_start_thresh + 20)) 829 > sc->tx_start_thresh) { 830 aprint_error(", new threshold is %d", i); 831 sc->tx_start_thresh = i; 832 } 833 sc->tx_succ_ok = 0; 834 } 835 aprint_error("\n"); 836 if (err & TXS_MAX_COLLISION) 837 ++sc->sc_ethercom.ec_if.if_collisions; 838 839 /* Wait for TX_RESET to finish. */ 840 ex_waitcmd(sc); 841 842 /* Reload Tx parameters. */ 843 ex_setup_tx(sc); 844 } else { 845 if (err & TXS_MAX_COLLISION) 846 ++sc->sc_ethercom.ec_if.if_collisions; 847 sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE; 848 } 849 850 bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE); 851 852 /* Retransmit current packet if any. */ 853 if (sc->tx_head) { 854 ifp->if_flags |= IFF_OACTIVE; 855 bus_space_write_2(iot, ioh, ELINK_COMMAND, 856 ELINK_DNUNSTALL); 857 bus_space_write_4(iot, ioh, ELINK_DNLISTPTR, 858 DPD_DMADDR(sc, sc->tx_head)); 859 860 /* Retrigger watchdog if stopped. */ 861 if (ifp->if_timer == 0) 862 ifp->if_timer = 1; 863 } 864 } 865 866 int 867 ex_media_chg(struct ifnet *ifp) 868 { 869 870 if (ifp->if_flags & IFF_UP) 871 ex_init(ifp); 872 return 0; 873 } 874 875 void 876 ex_set_xcvr(struct ex_softc *sc, const uint16_t media) 877 { 878 bus_space_tag_t iot = sc->sc_iot; 879 bus_space_handle_t ioh = sc->sc_ioh; 880 uint32_t icfg; 881 882 /* 883 * We're already in Window 3 884 */ 885 icfg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG); 886 icfg &= ~(CONFIG_XCVR_SEL << 16); 887 if (media & (ELINK_MEDIACAP_MII | ELINK_MEDIACAP_100BASET4)) 888 icfg |= ELINKMEDIA_MII << (CONFIG_XCVR_SEL_SHIFT + 16); 889 if (media & ELINK_MEDIACAP_100BASETX) 890 icfg |= ELINKMEDIA_AUTO << (CONFIG_XCVR_SEL_SHIFT + 16); 891 if (media & ELINK_MEDIACAP_100BASEFX) 892 icfg |= ELINKMEDIA_100BASE_FX 893 << (CONFIG_XCVR_SEL_SHIFT + 16); 894 bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, icfg); 895 } 896 897 void 898 ex_set_media(struct ex_softc *sc) 899 { 900 bus_space_tag_t iot = sc->sc_iot; 901 bus_space_handle_t ioh = sc->sc_ioh; 902 uint32_t configreg; 903 904 if (((sc->ex_conf & EX_CONF_MII) && 905 (sc->ex_mii.mii_media_active & IFM_FDX)) 906 || (!(sc->ex_conf & EX_CONF_MII) && 907 (sc->ex_mii.mii_media.ifm_media & IFM_FDX))) { 908 bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, 909 MAC_CONTROL_FDX); 910 } else { 911 bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, 0); 912 } 913 914 /* 915 * If the device has MII, select it, and then tell the 916 * PHY which media to use. 917 */ 918 if (sc->ex_conf & EX_CONF_MII) { 919 uint16_t val; 920 921 GO_WINDOW(3); 922 val = bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS); 923 ex_set_xcvr(sc, val); 924 mii_mediachg(&sc->ex_mii); 925 return; 926 } 927 928 GO_WINDOW(4); 929 bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 0); 930 bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER); 931 delay(800); 932 933 /* 934 * Now turn on the selected media/transceiver. 935 */ 936 switch (IFM_SUBTYPE(sc->ex_mii.mii_media.ifm_cur->ifm_media)) { 937 case IFM_10_T: 938 bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 939 JABBER_GUARD_ENABLE|LINKBEAT_ENABLE); 940 break; 941 942 case IFM_10_2: 943 bus_space_write_2(iot, ioh, ELINK_COMMAND, START_TRANSCEIVER); 944 DELAY(800); 945 break; 946 947 case IFM_100_TX: 948 case IFM_100_FX: 949 bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 950 LINKBEAT_ENABLE); 951 DELAY(800); 952 break; 953 954 case IFM_10_5: 955 bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 956 SQE_ENABLE); 957 DELAY(800); 958 break; 959 960 case IFM_MANUAL: 961 break; 962 963 case IFM_NONE: 964 return; 965 966 default: 967 panic("ex_set_media: impossible"); 968 } 969 970 GO_WINDOW(3); 971 configreg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG); 972 973 configreg &= ~(CONFIG_MEDIAMASK << 16); 974 configreg |= (sc->ex_mii.mii_media.ifm_cur->ifm_data << 975 (CONFIG_MEDIAMASK_SHIFT + 16)); 976 977 bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, configreg); 978 } 979 980 /* 981 * Get currently-selected media from card. 982 * (if_media callback, may be called before interface is brought up). 983 */ 984 void 985 ex_media_stat(struct ifnet *ifp, struct ifmediareq *req) 986 { 987 struct ex_softc *sc = ifp->if_softc; 988 uint16_t help; 989 990 if ((ifp->if_flags & (IFF_UP|IFF_RUNNING)) == (IFF_UP|IFF_RUNNING)) { 991 if (sc->ex_conf & EX_CONF_MII) { 992 mii_pollstat(&sc->ex_mii); 993 req->ifm_status = sc->ex_mii.mii_media_status; 994 req->ifm_active = sc->ex_mii.mii_media_active; 995 } else { 996 GO_WINDOW(4); 997 req->ifm_status = IFM_AVALID; 998 req->ifm_active = 999 sc->ex_mii.mii_media.ifm_cur->ifm_media; 1000 help = bus_space_read_2(sc->sc_iot, sc->sc_ioh, 1001 ELINK_W4_MEDIA_TYPE); 1002 if (help & LINKBEAT_DETECT) 1003 req->ifm_status |= IFM_ACTIVE; 1004 GO_WINDOW(1); 1005 } 1006 } 1007 } 1008 1009 1010 1011 /* 1012 * Start outputting on the interface. 1013 */ 1014 static void 1015 ex_start(struct ifnet *ifp) 1016 { 1017 struct ex_softc *sc = ifp->if_softc; 1018 bus_space_tag_t iot = sc->sc_iot; 1019 bus_space_handle_t ioh = sc->sc_ioh; 1020 volatile struct ex_fraghdr *fr = NULL; 1021 volatile struct ex_dpd *dpd = NULL, *prevdpd = NULL; 1022 struct ex_txdesc *txp; 1023 struct mbuf *mb_head; 1024 bus_dmamap_t dmamap; 1025 int m_csumflags, offset, seglen, totlen, segment, error; 1026 uint32_t csum_flags; 1027 1028 if (sc->tx_head || sc->tx_free == NULL) 1029 return; 1030 1031 txp = NULL; 1032 1033 /* 1034 * We're finished if there is nothing more to add to the list or if 1035 * we're all filled up with buffers to transmit. 1036 */ 1037 while (sc->tx_free != NULL) { 1038 /* 1039 * Grab a packet to transmit. 1040 */ 1041 IFQ_DEQUEUE(&ifp->if_snd, mb_head); 1042 if (mb_head == NULL) 1043 break; 1044 1045 /* 1046 * mb_head might be updated later, 1047 * so preserve csum_flags here. 1048 */ 1049 m_csumflags = mb_head->m_pkthdr.csum_flags; 1050 1051 /* 1052 * Get pointer to next available tx desc. 1053 */ 1054 txp = sc->tx_free; 1055 dmamap = txp->tx_dmamap; 1056 1057 /* 1058 * Go through each of the mbufs in the chain and initialize 1059 * the transmit buffer descriptors with the physical address 1060 * and size of the mbuf. 1061 */ 1062 reload: 1063 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 1064 mb_head, BUS_DMA_WRITE|BUS_DMA_NOWAIT); 1065 switch (error) { 1066 case 0: 1067 /* Success. */ 1068 break; 1069 1070 case EFBIG: 1071 { 1072 struct mbuf *mn; 1073 1074 /* 1075 * We ran out of segments. We have to recopy this 1076 * mbuf chain first. Bail out if we can't get the 1077 * new buffers. 1078 */ 1079 aprint_error_dev(sc->sc_dev, "too many segments, "); 1080 1081 MGETHDR(mn, M_DONTWAIT, MT_DATA); 1082 if (mn == NULL) { 1083 m_freem(mb_head); 1084 aprint_error("aborting\n"); 1085 goto out; 1086 } 1087 if (mb_head->m_pkthdr.len > MHLEN) { 1088 MCLGET(mn, M_DONTWAIT); 1089 if ((mn->m_flags & M_EXT) == 0) { 1090 m_freem(mn); 1091 m_freem(mb_head); 1092 aprint_error("aborting\n"); 1093 goto out; 1094 } 1095 } 1096 m_copydata(mb_head, 0, mb_head->m_pkthdr.len, 1097 mtod(mn, void *)); 1098 mn->m_pkthdr.len = mn->m_len = mb_head->m_pkthdr.len; 1099 m_freem(mb_head); 1100 mb_head = mn; 1101 aprint_error("retrying\n"); 1102 goto reload; 1103 } 1104 1105 default: 1106 /* 1107 * Some other problem; report it. 1108 */ 1109 aprint_error_dev(sc->sc_dev, 1110 "can't load mbuf chain, error = %d\n", error); 1111 m_freem(mb_head); 1112 goto out; 1113 } 1114 1115 /* 1116 * remove our tx desc from freelist. 1117 */ 1118 sc->tx_free = txp->tx_next; 1119 txp->tx_next = NULL; 1120 1121 fr = &txp->tx_dpd->dpd_frags[0]; 1122 totlen = 0; 1123 for (segment = 0; segment < dmamap->dm_nsegs; segment++, fr++) { 1124 fr->fr_addr = htole32(dmamap->dm_segs[segment].ds_addr); 1125 seglen = dmamap->dm_segs[segment].ds_len; 1126 fr->fr_len = htole32(seglen); 1127 totlen += seglen; 1128 } 1129 if (__predict_false(totlen <= EX_IP4CSUMTX_PADLEN && 1130 (m_csumflags & M_CSUM_IPv4) != 0)) { 1131 /* 1132 * Pad short packets to avoid ip4csum-tx bug. 1133 * 1134 * XXX Should we still consider if such short 1135 * (36 bytes or less) packets might already 1136 * occupy EX_NTFRAG (== 32) fragments here? 1137 */ 1138 KASSERT(segment < EX_NTFRAGS); 1139 fr->fr_addr = htole32(DPDMEMPAD_DMADDR(sc)); 1140 seglen = EX_IP4CSUMTX_PADLEN + 1 - totlen; 1141 fr->fr_len = htole32(EX_FR_LAST | seglen); 1142 totlen += seglen; 1143 } else { 1144 fr--; 1145 fr->fr_len |= htole32(EX_FR_LAST); 1146 } 1147 txp->tx_mbhead = mb_head; 1148 1149 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 1150 BUS_DMASYNC_PREWRITE); 1151 1152 dpd = txp->tx_dpd; 1153 dpd->dpd_nextptr = 0; 1154 dpd->dpd_fsh = htole32(totlen); 1155 1156 /* Byte-swap constants so compiler can optimize. */ 1157 1158 if (sc->ex_conf & EX_CONF_90XB) { 1159 csum_flags = 0; 1160 1161 if (m_csumflags & M_CSUM_IPv4) 1162 csum_flags |= htole32(EX_DPD_IPCKSUM); 1163 1164 if (m_csumflags & M_CSUM_TCPv4) 1165 csum_flags |= htole32(EX_DPD_TCPCKSUM); 1166 else if (m_csumflags & M_CSUM_UDPv4) 1167 csum_flags |= htole32(EX_DPD_UDPCKSUM); 1168 1169 dpd->dpd_fsh |= csum_flags; 1170 } else { 1171 KDASSERT((mb_head->m_pkthdr.csum_flags & 1172 (M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4)) == 0); 1173 } 1174 1175 bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, 1176 ((const char *)(intptr_t)dpd - (const char *)sc->sc_dpd), 1177 sizeof (struct ex_dpd), 1178 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1179 1180 /* 1181 * No need to stall the download engine, we know it's 1182 * not busy right now. 1183 * 1184 * Fix up pointers in both the "soft" tx and the physical 1185 * tx list. 1186 */ 1187 if (sc->tx_head != NULL) { 1188 prevdpd = sc->tx_tail->tx_dpd; 1189 offset = ((const char *)(intptr_t)prevdpd - (const char *)sc->sc_dpd); 1190 bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, 1191 offset, sizeof (struct ex_dpd), 1192 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1193 prevdpd->dpd_nextptr = htole32(DPD_DMADDR(sc, txp)); 1194 bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, 1195 offset, sizeof (struct ex_dpd), 1196 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1197 sc->tx_tail->tx_next = txp; 1198 sc->tx_tail = txp; 1199 } else { 1200 sc->tx_tail = sc->tx_head = txp; 1201 } 1202 1203 #if NBPFILTER > 0 1204 /* 1205 * Pass packet to bpf if there is a listener. 1206 */ 1207 if (ifp->if_bpf) 1208 bpf_mtap(ifp->if_bpf, mb_head); 1209 #endif 1210 } 1211 out: 1212 if (sc->tx_head) { 1213 sc->tx_tail->tx_dpd->dpd_fsh |= htole32(EX_DPD_DNIND); 1214 bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, 1215 ((char *)sc->tx_tail->tx_dpd - (char *)sc->sc_dpd), 1216 sizeof (struct ex_dpd), 1217 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1218 ifp->if_flags |= IFF_OACTIVE; 1219 bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_DNUNSTALL); 1220 bus_space_write_4(iot, ioh, ELINK_DNLISTPTR, 1221 DPD_DMADDR(sc, sc->tx_head)); 1222 1223 /* trigger watchdog */ 1224 ifp->if_timer = 5; 1225 } 1226 } 1227 1228 1229 int 1230 ex_intr(void *arg) 1231 { 1232 struct ex_softc *sc = arg; 1233 bus_space_tag_t iot = sc->sc_iot; 1234 bus_space_handle_t ioh = sc->sc_ioh; 1235 uint16_t stat; 1236 int ret = 0; 1237 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1238 1239 if ((ifp->if_flags & IFF_RUNNING) == 0 || 1240 !device_is_active(sc->sc_dev)) 1241 return (0); 1242 1243 for (;;) { 1244 stat = bus_space_read_2(iot, ioh, ELINK_STATUS); 1245 1246 if ((stat & XL_WATCHED_INTERRUPTS) == 0) { 1247 if ((stat & INTR_LATCH) == 0) { 1248 #if 0 1249 aprint_error_dev(sc->sc_dev, 1250 "intr latch cleared\n"); 1251 #endif 1252 break; 1253 } 1254 } 1255 1256 ret = 1; 1257 1258 /* 1259 * Acknowledge interrupts. 1260 */ 1261 bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | 1262 (stat & (XL_WATCHED_INTERRUPTS | INTR_LATCH))); 1263 if (sc->intr_ack) 1264 (*sc->intr_ack)(sc); 1265 1266 if (stat & HOST_ERROR) { 1267 aprint_error_dev(sc->sc_dev, 1268 "adapter failure (%x)\n", stat); 1269 ex_reset(sc); 1270 ex_init(ifp); 1271 return 1; 1272 } 1273 if (stat & UPD_STATS) { 1274 ex_getstats(sc); 1275 } 1276 if (stat & TX_COMPLETE) { 1277 ex_txstat(sc); 1278 #if 0 1279 if (stat & DN_COMPLETE) 1280 aprint_error_dev(sc->sc_dev, 1281 "Ignoring Dn interrupt (%x)\n", stat); 1282 #endif 1283 /* 1284 * In some rare cases, both Tx Complete and 1285 * Dn Complete bits are set. However, the packet 1286 * has been reloaded in ex_txstat() and should not 1287 * handle the Dn Complete event here. 1288 * Hence the "else" below. 1289 */ 1290 } else if (stat & DN_COMPLETE) { 1291 struct ex_txdesc *txp, *ptxp = NULL; 1292 bus_dmamap_t txmap; 1293 1294 /* reset watchdog timer, was set in ex_start() */ 1295 ifp->if_timer = 0; 1296 1297 for (txp = sc->tx_head; txp != NULL; 1298 txp = txp->tx_next) { 1299 bus_dmamap_sync(sc->sc_dmat, 1300 sc->sc_dpd_dmamap, 1301 (char *)txp->tx_dpd - (char *)sc->sc_dpd, 1302 sizeof (struct ex_dpd), 1303 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1304 if (txp->tx_mbhead != NULL) { 1305 txmap = txp->tx_dmamap; 1306 bus_dmamap_sync(sc->sc_dmat, txmap, 1307 0, txmap->dm_mapsize, 1308 BUS_DMASYNC_POSTWRITE); 1309 bus_dmamap_unload(sc->sc_dmat, txmap); 1310 m_freem(txp->tx_mbhead); 1311 txp->tx_mbhead = NULL; 1312 } 1313 ptxp = txp; 1314 } 1315 1316 /* 1317 * Move finished tx buffers back to the tx free list. 1318 */ 1319 if (sc->tx_free) { 1320 sc->tx_ftail->tx_next = sc->tx_head; 1321 sc->tx_ftail = ptxp; 1322 } else 1323 sc->tx_ftail = sc->tx_free = sc->tx_head; 1324 1325 sc->tx_head = sc->tx_tail = NULL; 1326 ifp->if_flags &= ~IFF_OACTIVE; 1327 1328 if (sc->tx_succ_ok < 256) 1329 sc->tx_succ_ok++; 1330 } 1331 1332 if (stat & UP_COMPLETE) { 1333 struct ex_rxdesc *rxd; 1334 struct mbuf *m; 1335 struct ex_upd *upd; 1336 bus_dmamap_t rxmap; 1337 uint32_t pktstat; 1338 1339 rcvloop: 1340 rxd = sc->rx_head; 1341 rxmap = rxd->rx_dmamap; 1342 m = rxd->rx_mbhead; 1343 upd = rxd->rx_upd; 1344 1345 bus_dmamap_sync(sc->sc_dmat, rxmap, 0, 1346 rxmap->dm_mapsize, 1347 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1348 bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, 1349 ((char *)upd - (char *)sc->sc_upd), 1350 sizeof (struct ex_upd), 1351 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1352 pktstat = le32toh(upd->upd_pktstatus); 1353 1354 if (pktstat & EX_UPD_COMPLETE) { 1355 /* 1356 * Remove first packet from the chain. 1357 */ 1358 sc->rx_head = rxd->rx_next; 1359 rxd->rx_next = NULL; 1360 1361 /* 1362 * Add a new buffer to the receive chain. 1363 * If this fails, the old buffer is recycled 1364 * instead. 1365 */ 1366 if (ex_add_rxbuf(sc, rxd) == 0) { 1367 uint16_t total_len; 1368 1369 if (pktstat & 1370 ((sc->sc_ethercom.ec_capenable & 1371 ETHERCAP_VLAN_MTU) ? 1372 EX_UPD_ERR_VLAN : EX_UPD_ERR)) { 1373 ifp->if_ierrors++; 1374 m_freem(m); 1375 goto rcvloop; 1376 } 1377 1378 total_len = pktstat & EX_UPD_PKTLENMASK; 1379 if (total_len < 1380 sizeof(struct ether_header)) { 1381 m_freem(m); 1382 goto rcvloop; 1383 } 1384 m->m_pkthdr.rcvif = ifp; 1385 m->m_pkthdr.len = m->m_len = total_len; 1386 #if NBPFILTER > 0 1387 if (ifp->if_bpf) 1388 bpf_mtap(ifp->if_bpf, m); 1389 #endif 1390 /* 1391 * Set the incoming checksum information for the packet. 1392 */ 1393 if ((sc->ex_conf & EX_CONF_90XB) != 0 && 1394 (pktstat & EX_UPD_IPCHECKED) != 0) { 1395 m->m_pkthdr.csum_flags |= M_CSUM_IPv4; 1396 if (pktstat & EX_UPD_IPCKSUMERR) 1397 m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD; 1398 if (pktstat & EX_UPD_TCPCHECKED) { 1399 m->m_pkthdr.csum_flags |= M_CSUM_TCPv4; 1400 if (pktstat & EX_UPD_TCPCKSUMERR) 1401 m->m_pkthdr.csum_flags |= 1402 M_CSUM_TCP_UDP_BAD; 1403 } else if (pktstat & EX_UPD_UDPCHECKED) { 1404 m->m_pkthdr.csum_flags |= M_CSUM_UDPv4; 1405 if (pktstat & EX_UPD_UDPCKSUMERR) 1406 m->m_pkthdr.csum_flags |= 1407 M_CSUM_TCP_UDP_BAD; 1408 } 1409 } 1410 (*ifp->if_input)(ifp, m); 1411 } 1412 goto rcvloop; 1413 } 1414 /* 1415 * Just in case we filled up all UPDs and the DMA engine 1416 * stalled. We could be more subtle about this. 1417 */ 1418 if (bus_space_read_4(iot, ioh, ELINK_UPLISTPTR) == 0) { 1419 aprint_error_dev(sc->sc_dev, 1420 "uplistptr was 0\n"); 1421 ex_init(ifp); 1422 } else if (bus_space_read_4(iot, ioh, ELINK_UPPKTSTATUS) 1423 & 0x2000) { 1424 aprint_error_dev(sc->sc_dev, 1425 "receive stalled\n"); 1426 bus_space_write_2(iot, ioh, ELINK_COMMAND, 1427 ELINK_UPUNSTALL); 1428 } 1429 } 1430 1431 #if NRND > 0 1432 if (stat) 1433 rnd_add_uint32(&sc->rnd_source, stat); 1434 #endif 1435 } 1436 1437 /* no more interrupts */ 1438 if (ret && IFQ_IS_EMPTY(&ifp->if_snd) == 0) 1439 ex_start(ifp); 1440 return ret; 1441 } 1442 1443 static int 1444 ex_ifflags_cb(struct ethercom *ec) 1445 { 1446 struct ifnet *ifp = &ec->ec_if; 1447 struct ex_softc *sc = ifp->if_softc; 1448 int change = ifp->if_flags ^ sc->sc_if_flags; 1449 1450 if ((change & ~(IFF_CANTCHANGE|IFF_DEBUG)) != 0) 1451 return ENETRESET; 1452 else if ((change & IFF_PROMISC) != 0) 1453 ex_set_mc(sc); 1454 return 0; 1455 } 1456 1457 int 1458 ex_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1459 { 1460 struct ex_softc *sc = ifp->if_softc; 1461 struct ifreq *ifr = (struct ifreq *)data; 1462 int s, error; 1463 1464 s = splnet(); 1465 1466 switch (cmd) { 1467 case SIOCSIFMEDIA: 1468 case SIOCGIFMEDIA: 1469 error = ifmedia_ioctl(ifp, ifr, &sc->ex_mii.mii_media, cmd); 1470 break; 1471 default: 1472 if ((error = ether_ioctl(ifp, cmd, data)) != ENETRESET) 1473 break; 1474 1475 error = 0; 1476 1477 if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI) 1478 ; 1479 else if (ifp->if_flags & IFF_RUNNING) { 1480 /* 1481 * Multicast list has changed; set the hardware filter 1482 * accordingly. 1483 */ 1484 ex_set_mc(sc); 1485 } 1486 break; 1487 } 1488 1489 sc->sc_if_flags = ifp->if_flags; 1490 splx(s); 1491 return (error); 1492 } 1493 1494 void 1495 ex_getstats(struct ex_softc *sc) 1496 { 1497 bus_space_handle_t ioh = sc->sc_ioh; 1498 bus_space_tag_t iot = sc->sc_iot; 1499 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1500 uint8_t upperok; 1501 1502 GO_WINDOW(6); 1503 upperok = bus_space_read_1(iot, ioh, UPPER_FRAMES_OK); 1504 ifp->if_ipackets += bus_space_read_1(iot, ioh, RX_FRAMES_OK); 1505 ifp->if_ipackets += (upperok & 0x03) << 8; 1506 ifp->if_opackets += bus_space_read_1(iot, ioh, TX_FRAMES_OK); 1507 ifp->if_opackets += (upperok & 0x30) << 4; 1508 ifp->if_ierrors += bus_space_read_1(iot, ioh, RX_OVERRUNS); 1509 ifp->if_collisions += bus_space_read_1(iot, ioh, TX_COLLISIONS); 1510 /* 1511 * There seems to be no way to get the exact number of collisions, 1512 * this is the number that occurred at the very least. 1513 */ 1514 ifp->if_collisions += 2 * bus_space_read_1(iot, ioh, 1515 TX_AFTER_X_COLLISIONS); 1516 /* 1517 * Interface byte counts are counted by ether_input() and 1518 * ether_output(), so don't accumulate them here. Just 1519 * read the NIC counters so they don't generate overflow interrupts. 1520 * Upper byte counters are latched from reading the totals, so 1521 * they don't need to be read if we don't need their values. 1522 */ 1523 (void)bus_space_read_2(iot, ioh, RX_TOTAL_OK); 1524 (void)bus_space_read_2(iot, ioh, TX_TOTAL_OK); 1525 1526 /* 1527 * Clear the following to avoid stats overflow interrupts 1528 */ 1529 (void)bus_space_read_1(iot, ioh, TX_DEFERRALS); 1530 (void)bus_space_read_1(iot, ioh, TX_AFTER_1_COLLISION); 1531 (void)bus_space_read_1(iot, ioh, TX_NO_SQE); 1532 (void)bus_space_read_1(iot, ioh, TX_CD_LOST); 1533 GO_WINDOW(4); 1534 (void)bus_space_read_1(iot, ioh, ELINK_W4_BADSSD); 1535 GO_WINDOW(1); 1536 } 1537 1538 void 1539 ex_printstats(struct ex_softc *sc) 1540 { 1541 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1542 1543 ex_getstats(sc); 1544 printf("in %llu out %llu ierror %llu oerror %llu ibytes %llu obytes " 1545 "%llu\n", (unsigned long long)ifp->if_ipackets, 1546 (unsigned long long)ifp->if_opackets, 1547 (unsigned long long)ifp->if_ierrors, 1548 (unsigned long long)ifp->if_oerrors, 1549 (unsigned long long)ifp->if_ibytes, 1550 (unsigned long long)ifp->if_obytes); 1551 } 1552 1553 void 1554 ex_tick(void *arg) 1555 { 1556 struct ex_softc *sc = arg; 1557 int s; 1558 1559 if (!device_is_active(sc->sc_dev)) 1560 return; 1561 1562 s = splnet(); 1563 1564 if (sc->ex_conf & EX_CONF_MII) 1565 mii_tick(&sc->ex_mii); 1566 1567 if (!(bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, ELINK_STATUS) 1568 & COMMAND_IN_PROGRESS)) 1569 ex_getstats(sc); 1570 1571 splx(s); 1572 1573 callout_reset(&sc->ex_mii_callout, hz, ex_tick, sc); 1574 } 1575 1576 void 1577 ex_reset(struct ex_softc *sc) 1578 { 1579 uint16_t val = GLOBAL_RESET; 1580 1581 if (sc->ex_conf & EX_CONF_RESETHACK) 1582 val |= 0x10; 1583 bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, val); 1584 /* 1585 * XXX apparently the command in progress bit can't be trusted 1586 * during a reset, so we just always wait this long. Fortunately 1587 * we normally only reset the chip during autoconfig. 1588 */ 1589 delay(100000); 1590 ex_waitcmd(sc); 1591 } 1592 1593 void 1594 ex_watchdog(struct ifnet *ifp) 1595 { 1596 struct ex_softc *sc = ifp->if_softc; 1597 1598 log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); 1599 ++sc->sc_ethercom.ec_if.if_oerrors; 1600 1601 ex_reset(sc); 1602 ex_init(ifp); 1603 } 1604 1605 void 1606 ex_stop(struct ifnet *ifp, int disable) 1607 { 1608 struct ex_softc *sc = ifp->if_softc; 1609 bus_space_tag_t iot = sc->sc_iot; 1610 bus_space_handle_t ioh = sc->sc_ioh; 1611 struct ex_txdesc *tx; 1612 struct ex_rxdesc *rx; 1613 int i; 1614 1615 bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISABLE); 1616 bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_DISABLE); 1617 bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER); 1618 1619 for (tx = sc->tx_head ; tx != NULL; tx = tx->tx_next) { 1620 if (tx->tx_mbhead == NULL) 1621 continue; 1622 m_freem(tx->tx_mbhead); 1623 tx->tx_mbhead = NULL; 1624 bus_dmamap_unload(sc->sc_dmat, tx->tx_dmamap); 1625 tx->tx_dpd->dpd_fsh = tx->tx_dpd->dpd_nextptr = 0; 1626 bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, 1627 ((char *)tx->tx_dpd - (char *)sc->sc_dpd), 1628 sizeof (struct ex_dpd), 1629 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1630 } 1631 sc->tx_tail = sc->tx_head = NULL; 1632 ex_init_txdescs(sc); 1633 1634 sc->rx_tail = sc->rx_head = 0; 1635 for (i = 0; i < EX_NUPD; i++) { 1636 rx = &sc->sc_rxdescs[i]; 1637 if (rx->rx_mbhead != NULL) { 1638 bus_dmamap_unload(sc->sc_dmat, rx->rx_dmamap); 1639 m_freem(rx->rx_mbhead); 1640 rx->rx_mbhead = NULL; 1641 } 1642 ex_add_rxbuf(sc, rx); 1643 } 1644 1645 bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | INTR_LATCH); 1646 1647 callout_stop(&sc->ex_mii_callout); 1648 if (sc->ex_conf & EX_CONF_MII) 1649 mii_down(&sc->ex_mii); 1650 1651 if (disable) 1652 ex_disable(sc); 1653 1654 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1655 sc->sc_if_flags = ifp->if_flags; 1656 ifp->if_timer = 0; 1657 } 1658 1659 static void 1660 ex_init_txdescs(struct ex_softc *sc) 1661 { 1662 int i; 1663 1664 for (i = 0; i < EX_NDPD; i++) { 1665 sc->sc_txdescs[i].tx_dmamap = sc->sc_tx_dmamaps[i]; 1666 sc->sc_txdescs[i].tx_dpd = &sc->sc_dpd[i]; 1667 if (i < EX_NDPD - 1) 1668 sc->sc_txdescs[i].tx_next = &sc->sc_txdescs[i + 1]; 1669 else 1670 sc->sc_txdescs[i].tx_next = NULL; 1671 } 1672 sc->tx_free = &sc->sc_txdescs[0]; 1673 sc->tx_ftail = &sc->sc_txdescs[EX_NDPD-1]; 1674 } 1675 1676 1677 int 1678 ex_activate(device_t self, enum devact act) 1679 { 1680 struct ex_softc *sc = device_private(self); 1681 int s, error = 0; 1682 1683 s = splnet(); 1684 switch (act) { 1685 case DVACT_ACTIVATE: 1686 error = EOPNOTSUPP; 1687 break; 1688 1689 case DVACT_DEACTIVATE: 1690 if (sc->ex_conf & EX_CONF_MII) 1691 mii_activate(&sc->ex_mii, act, MII_PHY_ANY, 1692 MII_OFFSET_ANY); 1693 if_deactivate(&sc->sc_ethercom.ec_if); 1694 break; 1695 } 1696 splx(s); 1697 1698 return (error); 1699 } 1700 1701 int 1702 ex_detach(struct ex_softc *sc) 1703 { 1704 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1705 struct ex_rxdesc *rxd; 1706 int i; 1707 1708 /* Succeed now if there's no work to do. */ 1709 if ((sc->ex_flags & EX_FLAGS_ATTACHED) == 0) 1710 return (0); 1711 1712 /* Unhook our tick handler. */ 1713 callout_stop(&sc->ex_mii_callout); 1714 1715 if (sc->ex_conf & EX_CONF_MII) { 1716 /* Detach all PHYs */ 1717 mii_detach(&sc->ex_mii, MII_PHY_ANY, MII_OFFSET_ANY); 1718 } 1719 1720 /* Delete all remaining media. */ 1721 ifmedia_delete_instance(&sc->ex_mii.mii_media, IFM_INST_ANY); 1722 1723 #if NRND > 0 1724 rnd_detach_source(&sc->rnd_source); 1725 #endif 1726 ether_ifdetach(ifp); 1727 if_detach(ifp); 1728 1729 for (i = 0; i < EX_NUPD; i++) { 1730 rxd = &sc->sc_rxdescs[i]; 1731 if (rxd->rx_mbhead != NULL) { 1732 bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap); 1733 m_freem(rxd->rx_mbhead); 1734 rxd->rx_mbhead = NULL; 1735 } 1736 } 1737 for (i = 0; i < EX_NUPD; i++) 1738 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rx_dmamaps[i]); 1739 for (i = 0; i < EX_NDPD; i++) 1740 bus_dmamap_destroy(sc->sc_dmat, sc->sc_tx_dmamaps[i]); 1741 bus_dmamap_unload(sc->sc_dmat, sc->sc_dpd_dmamap); 1742 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dpd_dmamap); 1743 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_dpd, 1744 EX_NDPD * sizeof (struct ex_dpd)); 1745 bus_dmamem_free(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg); 1746 bus_dmamap_unload(sc->sc_dmat, sc->sc_upd_dmamap); 1747 bus_dmamap_destroy(sc->sc_dmat, sc->sc_upd_dmamap); 1748 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_upd, 1749 EX_NUPD * sizeof (struct ex_upd)); 1750 bus_dmamem_free(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg); 1751 1752 pmf_device_deregister(sc->sc_dev); 1753 1754 return (0); 1755 } 1756 1757 /* 1758 * Before reboots, reset card completely. 1759 */ 1760 static bool 1761 ex_shutdown(device_t self, int flags) 1762 { 1763 struct ex_softc *sc = device_private(self); 1764 1765 ex_stop(&sc->sc_ethercom.ec_if, 1); 1766 /* 1767 * Make sure the interface is powered up when we reboot, 1768 * otherwise firmware on some systems gets really confused. 1769 */ 1770 (void) ex_enable(sc); 1771 return true; 1772 } 1773 1774 /* 1775 * Read EEPROM data. 1776 * XXX what to do if EEPROM doesn't unbusy? 1777 */ 1778 uint16_t 1779 ex_read_eeprom(struct ex_softc *sc, int offset) 1780 { 1781 bus_space_tag_t iot = sc->sc_iot; 1782 bus_space_handle_t ioh = sc->sc_ioh; 1783 uint16_t data = 0, cmd = READ_EEPROM; 1784 int off; 1785 1786 off = sc->ex_conf & EX_CONF_EEPROM_OFF ? 0x30 : 0; 1787 cmd = sc->ex_conf & EX_CONF_EEPROM_8BIT ? READ_EEPROM8 : READ_EEPROM; 1788 1789 GO_WINDOW(0); 1790 if (ex_eeprom_busy(sc)) 1791 goto out; 1792 bus_space_write_2(iot, ioh, ELINK_W0_EEPROM_COMMAND, 1793 cmd | (off + (offset & 0x3f))); 1794 if (ex_eeprom_busy(sc)) 1795 goto out; 1796 data = bus_space_read_2(iot, ioh, ELINK_W0_EEPROM_DATA); 1797 out: 1798 return data; 1799 } 1800 1801 static int 1802 ex_eeprom_busy(struct ex_softc *sc) 1803 { 1804 bus_space_tag_t iot = sc->sc_iot; 1805 bus_space_handle_t ioh = sc->sc_ioh; 1806 int i = 100; 1807 1808 while (i--) { 1809 if (!(bus_space_read_2(iot, ioh, ELINK_W0_EEPROM_COMMAND) & 1810 EEPROM_BUSY)) 1811 return 0; 1812 delay(100); 1813 } 1814 aprint_error_dev(sc->sc_dev, "eeprom stays busy.\n"); 1815 return (1); 1816 } 1817 1818 /* 1819 * Create a new rx buffer and add it to the 'soft' rx list. 1820 */ 1821 static int 1822 ex_add_rxbuf(struct ex_softc *sc, struct ex_rxdesc *rxd) 1823 { 1824 struct mbuf *m, *oldm; 1825 bus_dmamap_t rxmap; 1826 int error, rval = 0; 1827 1828 oldm = rxd->rx_mbhead; 1829 rxmap = rxd->rx_dmamap; 1830 1831 MGETHDR(m, M_DONTWAIT, MT_DATA); 1832 if (m != NULL) { 1833 MCLGET(m, M_DONTWAIT); 1834 if ((m->m_flags & M_EXT) == 0) { 1835 m_freem(m); 1836 if (oldm == NULL) 1837 return 1; 1838 m = oldm; 1839 MRESETDATA(m); 1840 rval = 1; 1841 } 1842 } else { 1843 if (oldm == NULL) 1844 return 1; 1845 m = oldm; 1846 MRESETDATA(m); 1847 rval = 1; 1848 } 1849 1850 /* 1851 * Setup the DMA map for this receive buffer. 1852 */ 1853 if (m != oldm) { 1854 if (oldm != NULL) 1855 bus_dmamap_unload(sc->sc_dmat, rxmap); 1856 error = bus_dmamap_load(sc->sc_dmat, rxmap, 1857 m->m_ext.ext_buf, MCLBYTES, NULL, 1858 BUS_DMA_READ|BUS_DMA_NOWAIT); 1859 if (error) { 1860 aprint_error_dev(sc->sc_dev, "can't load rx buffer, error = %d\n", 1861 error); 1862 panic("ex_add_rxbuf"); /* XXX */ 1863 } 1864 } 1865 1866 /* 1867 * Align for data after 14 byte header. 1868 */ 1869 m->m_data += 2; 1870 1871 rxd->rx_mbhead = m; 1872 rxd->rx_upd->upd_pktstatus = htole32(MCLBYTES - 2); 1873 rxd->rx_upd->upd_frags[0].fr_addr = 1874 htole32(rxmap->dm_segs[0].ds_addr + 2); 1875 rxd->rx_upd->upd_nextptr = 0; 1876 1877 /* 1878 * Attach it to the end of the list. 1879 */ 1880 if (sc->rx_head != NULL) { 1881 sc->rx_tail->rx_next = rxd; 1882 sc->rx_tail->rx_upd->upd_nextptr = htole32(sc->sc_upddma + 1883 ((char *)rxd->rx_upd - (char *)sc->sc_upd)); 1884 bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, 1885 (char *)sc->rx_tail->rx_upd - (char *)sc->sc_upd, 1886 sizeof (struct ex_upd), 1887 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1888 } else { 1889 sc->rx_head = rxd; 1890 } 1891 sc->rx_tail = rxd; 1892 1893 bus_dmamap_sync(sc->sc_dmat, rxmap, 0, rxmap->dm_mapsize, 1894 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1895 bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, 1896 ((char *)rxd->rx_upd - (char *)sc->sc_upd), 1897 sizeof (struct ex_upd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1898 return (rval); 1899 } 1900 1901 uint32_t 1902 ex_mii_bitbang_read(device_t self) 1903 { 1904 struct ex_softc *sc = device_private(self); 1905 1906 /* We're already in Window 4. */ 1907 return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT)); 1908 } 1909 1910 void 1911 ex_mii_bitbang_write(device_t self, uint32_t val) 1912 { 1913 struct ex_softc *sc = device_private(self); 1914 1915 /* We're already in Window 4. */ 1916 bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT, val); 1917 } 1918 1919 int 1920 ex_mii_readreg(device_t v, int phy, int reg) 1921 { 1922 struct ex_softc *sc = device_private(v); 1923 int val; 1924 1925 if ((sc->ex_conf & EX_CONF_INTPHY) && phy != ELINK_INTPHY_ID) 1926 return 0; 1927 1928 GO_WINDOW(4); 1929 1930 val = mii_bitbang_readreg(v, &ex_mii_bitbang_ops, phy, reg); 1931 1932 GO_WINDOW(1); 1933 1934 return (val); 1935 } 1936 1937 void 1938 ex_mii_writereg(device_t v, int phy, int reg, int data) 1939 { 1940 struct ex_softc *sc = device_private(v); 1941 1942 GO_WINDOW(4); 1943 1944 mii_bitbang_writereg(v, &ex_mii_bitbang_ops, phy, reg, data); 1945 1946 GO_WINDOW(1); 1947 } 1948 1949 void 1950 ex_mii_statchg(device_t v) 1951 { 1952 struct ex_softc *sc = device_private(v); 1953 bus_space_tag_t iot = sc->sc_iot; 1954 bus_space_handle_t ioh = sc->sc_ioh; 1955 int mctl; 1956 1957 GO_WINDOW(3); 1958 mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL); 1959 if (sc->ex_mii.mii_media_active & IFM_FDX) 1960 mctl |= MAC_CONTROL_FDX; 1961 else 1962 mctl &= ~MAC_CONTROL_FDX; 1963 bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl); 1964 GO_WINDOW(1); /* back to operating window */ 1965 } 1966 1967 int 1968 ex_enable(struct ex_softc *sc) 1969 { 1970 if (sc->enabled == 0 && sc->enable != NULL) { 1971 if ((*sc->enable)(sc) != 0) { 1972 aprint_error_dev(sc->sc_dev, "device enable failed\n"); 1973 return (EIO); 1974 } 1975 sc->enabled = 1; 1976 } 1977 return (0); 1978 } 1979 1980 void 1981 ex_disable(struct ex_softc *sc) 1982 { 1983 if (sc->enabled == 1 && sc->disable != NULL) { 1984 (*sc->disable)(sc); 1985 sc->enabled = 0; 1986 } 1987 } 1988 1989
Indexes created Wed Oct 22 13:09:56 GMT 2025