i82557.c revision 1.102
1 /* $NetBSD: i82557.c,v 1.102 2007/07/09 21:00:36 ad Exp $ */ 2 3 /*- 4 * Copyright (c) 1997, 1998, 1999, 2001, 2002 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * Copyright (c) 1995, David Greenman 42 * Copyright (c) 2001 Jonathan Lemon <jlemon (at) freebsd.org> 43 * All rights reserved. 44 * 45 * Redistribution and use in source and binary forms, with or without 46 * modification, are permitted provided that the following conditions 47 * are met: 48 * 1. Redistributions of source code must retain the above copyright 49 * notice unmodified, this list of conditions, and the following 50 * disclaimer. 51 * 2. Redistributions in binary form must reproduce the above copyright 52 * notice, this list of conditions and the following disclaimer in the 53 * documentation and/or other materials provided with the distribution. 54 * 55 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 56 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 57 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 58 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 59 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 60 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 61 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 62 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 63 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 64 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 65 * SUCH DAMAGE. 66 * 67 * Id: if_fxp.c,v 1.113 2001/05/17 23:50:24 jlemon 68 */ 69 70 /* 71 * Device driver for the Intel i82557 fast Ethernet controller, 72 * and its successors, the i82558 and i82559. 73 */ 74 75 #include <sys/cdefs.h> 76 __KERNEL_RCSID(0, "$NetBSD: i82557.c,v 1.102 2007/07/09 21:00:36 ad Exp $"); 77 78 #include "bpfilter.h" 79 #include "rnd.h" 80 81 #include <sys/param.h> 82 #include <sys/systm.h> 83 #include <sys/callout.h> 84 #include <sys/mbuf.h> 85 #include <sys/malloc.h> 86 #include <sys/kernel.h> 87 #include <sys/socket.h> 88 #include <sys/ioctl.h> 89 #include <sys/errno.h> 90 #include <sys/device.h> 91 #include <sys/syslog.h> 92 93 #include <machine/endian.h> 94 95 #include <uvm/uvm_extern.h> 96 97 #if NRND > 0 98 #include <sys/rnd.h> 99 #endif 100 101 #include <net/if.h> 102 #include <net/if_dl.h> 103 #include <net/if_media.h> 104 #include <net/if_ether.h> 105 106 #if NBPFILTER > 0 107 #include <net/bpf.h> 108 #endif 109 110 #include <machine/bus.h> 111 #include <machine/intr.h> 112 113 #include <dev/mii/miivar.h> 114 115 #include <dev/ic/i82557reg.h> 116 #include <dev/ic/i82557var.h> 117 118 #include <dev/microcode/i8255x/rcvbundl.h> 119 120 /* 121 * NOTE! On the Alpha, we have an alignment constraint. The 122 * card DMAs the packet immediately following the RFA. However, 123 * the first thing in the packet is a 14-byte Ethernet header. 124 * This means that the packet is misaligned. To compensate, 125 * we actually offset the RFA 2 bytes into the cluster. This 126 * alignes the packet after the Ethernet header at a 32-bit 127 * boundary. HOWEVER! This means that the RFA is misaligned! 128 */ 129 #define RFA_ALIGNMENT_FUDGE 2 130 131 /* 132 * The configuration byte map has several undefined fields which 133 * must be one or must be zero. Set up a template for these bits 134 * only (assuming an i82557 chip), leaving the actual configuration 135 * for fxp_init(). 136 * 137 * See the definition of struct fxp_cb_config for the bit definitions. 138 */ 139 const u_int8_t fxp_cb_config_template[] = { 140 0x0, 0x0, /* cb_status */ 141 0x0, 0x0, /* cb_command */ 142 0x0, 0x0, 0x0, 0x0, /* link_addr */ 143 0x0, /* 0 */ 144 0x0, /* 1 */ 145 0x0, /* 2 */ 146 0x0, /* 3 */ 147 0x0, /* 4 */ 148 0x0, /* 5 */ 149 0x32, /* 6 */ 150 0x0, /* 7 */ 151 0x0, /* 8 */ 152 0x0, /* 9 */ 153 0x6, /* 10 */ 154 0x0, /* 11 */ 155 0x0, /* 12 */ 156 0x0, /* 13 */ 157 0xf2, /* 14 */ 158 0x48, /* 15 */ 159 0x0, /* 16 */ 160 0x40, /* 17 */ 161 0xf0, /* 18 */ 162 0x0, /* 19 */ 163 0x3f, /* 20 */ 164 0x5, /* 21 */ 165 0x0, /* 22 */ 166 0x0, /* 23 */ 167 0x0, /* 24 */ 168 0x0, /* 25 */ 169 0x0, /* 26 */ 170 0x0, /* 27 */ 171 0x0, /* 28 */ 172 0x0, /* 29 */ 173 0x0, /* 30 */ 174 0x0, /* 31 */ 175 }; 176 177 void fxp_mii_initmedia(struct fxp_softc *); 178 int fxp_mii_mediachange(struct ifnet *); 179 void fxp_mii_mediastatus(struct ifnet *, struct ifmediareq *); 180 181 void fxp_80c24_initmedia(struct fxp_softc *); 182 int fxp_80c24_mediachange(struct ifnet *); 183 void fxp_80c24_mediastatus(struct ifnet *, struct ifmediareq *); 184 185 void fxp_start(struct ifnet *); 186 int fxp_ioctl(struct ifnet *, u_long, void *); 187 void fxp_watchdog(struct ifnet *); 188 int fxp_init(struct ifnet *); 189 void fxp_stop(struct ifnet *, int); 190 191 void fxp_txintr(struct fxp_softc *); 192 void fxp_rxintr(struct fxp_softc *); 193 194 int fxp_rx_hwcksum(struct mbuf *, const struct fxp_rfa *); 195 196 void fxp_rxdrain(struct fxp_softc *); 197 int fxp_add_rfabuf(struct fxp_softc *, bus_dmamap_t, int); 198 int fxp_mdi_read(struct device *, int, int); 199 void fxp_statchg(struct device *); 200 void fxp_mdi_write(struct device *, int, int, int); 201 void fxp_autosize_eeprom(struct fxp_softc*); 202 void fxp_read_eeprom(struct fxp_softc *, u_int16_t *, int, int); 203 void fxp_write_eeprom(struct fxp_softc *, u_int16_t *, int, int); 204 void fxp_eeprom_update_cksum(struct fxp_softc *); 205 void fxp_get_info(struct fxp_softc *, u_int8_t *); 206 void fxp_tick(void *); 207 void fxp_mc_setup(struct fxp_softc *); 208 void fxp_load_ucode(struct fxp_softc *); 209 210 void fxp_shutdown(void *); 211 void fxp_power(int, void *); 212 213 int fxp_copy_small = 0; 214 215 /* 216 * Variables for interrupt mitigating microcode. 217 */ 218 int fxp_int_delay = 1000; /* usec */ 219 int fxp_bundle_max = 6; /* packets */ 220 221 struct fxp_phytype { 222 int fp_phy; /* type of PHY, -1 for MII at the end. */ 223 void (*fp_init)(struct fxp_softc *); 224 } fxp_phytype_table[] = { 225 { FXP_PHY_80C24, fxp_80c24_initmedia }, 226 { -1, fxp_mii_initmedia }, 227 }; 228 229 /* 230 * Set initial transmit threshold at 64 (512 bytes). This is 231 * increased by 64 (512 bytes) at a time, to maximum of 192 232 * (1536 bytes), if an underrun occurs. 233 */ 234 static int tx_threshold = 64; 235 236 /* 237 * Wait for the previous command to be accepted (but not necessarily 238 * completed). 239 */ 240 static inline void 241 fxp_scb_wait(struct fxp_softc *sc) 242 { 243 int i = 10000; 244 245 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i) 246 delay(2); 247 if (i == 0) 248 log(LOG_WARNING, 249 "%s: WARNING: SCB timed out!\n", sc->sc_dev.dv_xname); 250 } 251 252 /* 253 * Submit a command to the i82557. 254 */ 255 static inline void 256 fxp_scb_cmd(struct fxp_softc *sc, u_int8_t cmd) 257 { 258 259 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd); 260 } 261 262 /* 263 * Finish attaching an i82557 interface. Called by bus-specific front-end. 264 */ 265 void 266 fxp_attach(struct fxp_softc *sc) 267 { 268 u_int8_t enaddr[ETHER_ADDR_LEN]; 269 struct ifnet *ifp; 270 bus_dma_segment_t seg; 271 int rseg, i, error; 272 struct fxp_phytype *fp; 273 274 callout_init(&sc->sc_callout, 0); 275 276 /* 277 * Enable some good stuff on i82558 and later. 278 */ 279 if (sc->sc_rev >= FXP_REV_82558_A4) { 280 /* Enable the extended TxCB. */ 281 sc->sc_flags |= FXPF_EXT_TXCB; 282 } 283 284 /* 285 * Enable use of extended RFDs and TCBs for 82550 286 * and later chips. Note: we need extended TXCB support 287 * too, but that's already enabled by the code above. 288 * Be careful to do this only on the right devices. 289 */ 290 if (sc->sc_rev == FXP_REV_82550 || sc->sc_rev == FXP_REV_82550_C) { 291 sc->sc_flags |= FXPF_EXT_RFA | FXPF_IPCB; 292 sc->sc_txcmd = htole16(FXP_CB_COMMAND_IPCBXMIT); 293 } else { 294 sc->sc_txcmd = htole16(FXP_CB_COMMAND_XMIT); 295 } 296 297 sc->sc_rfa_size = 298 (sc->sc_flags & FXPF_EXT_RFA) ? RFA_EXT_SIZE : RFA_SIZE; 299 300 /* 301 * Allocate the control data structures, and create and load the 302 * DMA map for it. 303 */ 304 if ((error = bus_dmamem_alloc(sc->sc_dmat, 305 sizeof(struct fxp_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 306 0)) != 0) { 307 aprint_error( 308 "%s: unable to allocate control data, error = %d\n", 309 sc->sc_dev.dv_xname, error); 310 goto fail_0; 311 } 312 313 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, 314 sizeof(struct fxp_control_data), (void **)&sc->sc_control_data, 315 BUS_DMA_COHERENT)) != 0) { 316 aprint_error("%s: unable to map control data, error = %d\n", 317 sc->sc_dev.dv_xname, error); 318 goto fail_1; 319 } 320 sc->sc_cdseg = seg; 321 sc->sc_cdnseg = rseg; 322 323 memset(sc->sc_control_data, 0, sizeof(struct fxp_control_data)); 324 325 if ((error = bus_dmamap_create(sc->sc_dmat, 326 sizeof(struct fxp_control_data), 1, 327 sizeof(struct fxp_control_data), 0, 0, &sc->sc_dmamap)) != 0) { 328 aprint_error("%s: unable to create control data DMA map, " 329 "error = %d\n", sc->sc_dev.dv_xname, error); 330 goto fail_2; 331 } 332 333 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap, 334 sc->sc_control_data, sizeof(struct fxp_control_data), NULL, 335 0)) != 0) { 336 aprint_error( 337 "%s: can't load control data DMA map, error = %d\n", 338 sc->sc_dev.dv_xname, error); 339 goto fail_3; 340 } 341 342 /* 343 * Create the transmit buffer DMA maps. 344 */ 345 for (i = 0; i < FXP_NTXCB; i++) { 346 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 347 (sc->sc_flags & FXPF_IPCB) ? FXP_IPCB_NTXSEG : FXP_NTXSEG, 348 MCLBYTES, 0, 0, &FXP_DSTX(sc, i)->txs_dmamap)) != 0) { 349 aprint_error("%s: unable to create tx DMA map %d, " 350 "error = %d\n", sc->sc_dev.dv_xname, i, error); 351 goto fail_4; 352 } 353 } 354 355 /* 356 * Create the receive buffer DMA maps. 357 */ 358 for (i = 0; i < FXP_NRFABUFS; i++) { 359 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 360 MCLBYTES, 0, 0, &sc->sc_rxmaps[i])) != 0) { 361 aprint_error("%s: unable to create rx DMA map %d, " 362 "error = %d\n", sc->sc_dev.dv_xname, i, error); 363 goto fail_5; 364 } 365 } 366 367 /* Initialize MAC address and media structures. */ 368 fxp_get_info(sc, enaddr); 369 370 aprint_normal("%s: Ethernet address %s\n", sc->sc_dev.dv_xname, 371 ether_sprintf(enaddr)); 372 373 ifp = &sc->sc_ethercom.ec_if; 374 375 /* 376 * Get info about our media interface, and initialize it. Note 377 * the table terminates itself with a phy of -1, indicating 378 * that we're using MII. 379 */ 380 for (fp = fxp_phytype_table; fp->fp_phy != -1; fp++) 381 if (fp->fp_phy == sc->phy_primary_device) 382 break; 383 (*fp->fp_init)(sc); 384 385 strcpy(ifp->if_xname, sc->sc_dev.dv_xname); 386 ifp->if_softc = sc; 387 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 388 ifp->if_ioctl = fxp_ioctl; 389 ifp->if_start = fxp_start; 390 ifp->if_watchdog = fxp_watchdog; 391 ifp->if_init = fxp_init; 392 ifp->if_stop = fxp_stop; 393 IFQ_SET_READY(&ifp->if_snd); 394 395 if (sc->sc_flags & FXPF_IPCB) { 396 KASSERT(sc->sc_flags & FXPF_EXT_RFA); /* we have both or none */ 397 /* 398 * IFCAP_CSUM_IPv4_Tx seems to have a problem, 399 * at least, on i82550 rev.12. 400 * specifically, it doesn't calculate ipv4 checksum correctly 401 * when sending 20 byte ipv4 header + 1 or 2 byte data. 402 * FreeBSD driver has related comments. 403 */ 404 ifp->if_capabilities = 405 IFCAP_CSUM_IPv4_Rx | 406 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 407 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx; 408 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_HWTAGGING; 409 } 410 411 /* 412 * We can support 802.1Q VLAN-sized frames. 413 */ 414 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 415 416 /* 417 * Attach the interface. 418 */ 419 if_attach(ifp); 420 ether_ifattach(ifp, enaddr); 421 #if NRND > 0 422 rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname, 423 RND_TYPE_NET, 0); 424 #endif 425 426 #ifdef FXP_EVENT_COUNTERS 427 evcnt_attach_dynamic(&sc->sc_ev_txstall, EVCNT_TYPE_MISC, 428 NULL, sc->sc_dev.dv_xname, "txstall"); 429 evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_INTR, 430 NULL, sc->sc_dev.dv_xname, "txintr"); 431 evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, 432 NULL, sc->sc_dev.dv_xname, "rxintr"); 433 if (sc->sc_rev >= FXP_REV_82558_A4) { 434 evcnt_attach_dynamic(&sc->sc_ev_txpause, EVCNT_TYPE_MISC, 435 NULL, sc->sc_dev.dv_xname, "txpause"); 436 evcnt_attach_dynamic(&sc->sc_ev_rxpause, EVCNT_TYPE_MISC, 437 NULL, sc->sc_dev.dv_xname, "rxpause"); 438 } 439 #endif /* FXP_EVENT_COUNTERS */ 440 441 /* 442 * Add shutdown hook so that DMA is disabled prior to reboot. Not 443 * doing do could allow DMA to corrupt kernel memory during the 444 * reboot before the driver initializes. 445 */ 446 sc->sc_sdhook = shutdownhook_establish(fxp_shutdown, sc); 447 if (sc->sc_sdhook == NULL) 448 aprint_error("%s: WARNING: unable to establish shutdown hook\n", 449 sc->sc_dev.dv_xname); 450 /* 451 * Add suspend hook, for similar reasons.. 452 */ 453 sc->sc_powerhook = powerhook_establish(sc->sc_dev.dv_xname, 454 fxp_power, sc); 455 if (sc->sc_powerhook == NULL) 456 aprint_error("%s: WARNING: unable to establish power hook\n", 457 sc->sc_dev.dv_xname); 458 459 /* The attach is successful. */ 460 sc->sc_flags |= FXPF_ATTACHED; 461 462 return; 463 464 /* 465 * Free any resources we've allocated during the failed attach 466 * attempt. Do this in reverse order and fall though. 467 */ 468 fail_5: 469 for (i = 0; i < FXP_NRFABUFS; i++) { 470 if (sc->sc_rxmaps[i] != NULL) 471 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 472 } 473 fail_4: 474 for (i = 0; i < FXP_NTXCB; i++) { 475 if (FXP_DSTX(sc, i)->txs_dmamap != NULL) 476 bus_dmamap_destroy(sc->sc_dmat, 477 FXP_DSTX(sc, i)->txs_dmamap); 478 } 479 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 480 fail_3: 481 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 482 fail_2: 483 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 484 sizeof(struct fxp_control_data)); 485 fail_1: 486 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 487 fail_0: 488 return; 489 } 490 491 void 492 fxp_mii_initmedia(struct fxp_softc *sc) 493 { 494 int flags; 495 496 sc->sc_flags |= FXPF_MII; 497 498 sc->sc_mii.mii_ifp = &sc->sc_ethercom.ec_if; 499 sc->sc_mii.mii_readreg = fxp_mdi_read; 500 sc->sc_mii.mii_writereg = fxp_mdi_write; 501 sc->sc_mii.mii_statchg = fxp_statchg; 502 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, fxp_mii_mediachange, 503 fxp_mii_mediastatus); 504 505 flags = MIIF_NOISOLATE; 506 if (sc->sc_rev >= FXP_REV_82558_A4) 507 flags |= MIIF_DOPAUSE; 508 /* 509 * The i82557 wedges if all of its PHYs are isolated! 510 */ 511 mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, 512 MII_OFFSET_ANY, flags); 513 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { 514 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 515 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); 516 } else 517 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 518 } 519 520 void 521 fxp_80c24_initmedia(struct fxp_softc *sc) 522 { 523 524 /* 525 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter 526 * doesn't have a programming interface of any sort. The 527 * media is sensed automatically based on how the link partner 528 * is configured. This is, in essence, manual configuration. 529 */ 530 aprint_normal("%s: Seeq 80c24 AutoDUPLEX media interface present\n", 531 sc->sc_dev.dv_xname); 532 ifmedia_init(&sc->sc_mii.mii_media, 0, fxp_80c24_mediachange, 533 fxp_80c24_mediastatus); 534 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 535 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL); 536 } 537 538 /* 539 * Device shutdown routine. Called at system shutdown after sync. The 540 * main purpose of this routine is to shut off receiver DMA so that 541 * kernel memory doesn't get clobbered during warmboot. 542 */ 543 void 544 fxp_shutdown(void *arg) 545 { 546 struct fxp_softc *sc = arg; 547 548 /* 549 * Since the system's going to halt shortly, don't bother 550 * freeing mbufs. 551 */ 552 fxp_stop(&sc->sc_ethercom.ec_if, 0); 553 } 554 /* 555 * Power handler routine. Called when the system is transitioning 556 * into/out of power save modes. As with fxp_shutdown, the main 557 * purpose of this routine is to shut off receiver DMA so it doesn't 558 * clobber kernel memory at the wrong time. 559 */ 560 void 561 fxp_power(int why, void *arg) 562 { 563 struct fxp_softc *sc = arg; 564 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 565 int s; 566 567 s = splnet(); 568 switch (why) { 569 case PWR_SUSPEND: 570 case PWR_STANDBY: 571 fxp_stop(ifp, 0); 572 break; 573 case PWR_RESUME: 574 if (ifp->if_flags & IFF_UP) 575 fxp_init(ifp); 576 break; 577 case PWR_SOFTSUSPEND: 578 case PWR_SOFTSTANDBY: 579 case PWR_SOFTRESUME: 580 break; 581 } 582 splx(s); 583 } 584 585 /* 586 * Initialize the interface media. 587 */ 588 void 589 fxp_get_info(struct fxp_softc *sc, u_int8_t *enaddr) 590 { 591 u_int16_t data, myea[ETHER_ADDR_LEN / 2]; 592 593 /* 594 * Reset to a stable state. 595 */ 596 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 597 DELAY(100); 598 599 sc->sc_eeprom_size = 0; 600 fxp_autosize_eeprom(sc); 601 if (sc->sc_eeprom_size == 0) { 602 aprint_error("%s: failed to detect EEPROM size\n", 603 sc->sc_dev.dv_xname); 604 sc->sc_eeprom_size = 6; /* XXX panic here? */ 605 } 606 #ifdef DEBUG 607 aprint_debug("%s: detected %d word EEPROM\n", 608 sc->sc_dev.dv_xname, 1 << sc->sc_eeprom_size); 609 #endif 610 611 /* 612 * Get info about the primary PHY 613 */ 614 fxp_read_eeprom(sc, &data, 6, 1); 615 sc->phy_primary_device = 616 (data & FXP_PHY_DEVICE_MASK) >> FXP_PHY_DEVICE_SHIFT; 617 618 /* 619 * Read MAC address. 620 */ 621 fxp_read_eeprom(sc, myea, 0, 3); 622 enaddr[0] = myea[0] & 0xff; 623 enaddr[1] = myea[0] >> 8; 624 enaddr[2] = myea[1] & 0xff; 625 enaddr[3] = myea[1] >> 8; 626 enaddr[4] = myea[2] & 0xff; 627 enaddr[5] = myea[2] >> 8; 628 629 /* 630 * Systems based on the ICH2/ICH2-M chip from Intel, as well 631 * as some i82559 designs, have a defect where the chip can 632 * cause a PCI protocol violation if it receives a CU_RESUME 633 * command when it is entering the IDLE state. 634 * 635 * The work-around is to disable Dynamic Standby Mode, so that 636 * the chip never deasserts #CLKRUN, and always remains in the 637 * active state. 638 * 639 * Unfortunately, the only way to disable Dynamic Standby is 640 * to frob an EEPROM setting and reboot (the EEPROM setting 641 * is only consulted when the PCI bus comes out of reset). 642 * 643 * See Intel 82801BA/82801BAM Specification Update, Errata #30. 644 */ 645 if (sc->sc_flags & FXPF_HAS_RESUME_BUG) { 646 fxp_read_eeprom(sc, &data, 10, 1); 647 if (data & 0x02) { /* STB enable */ 648 aprint_error("%s: WARNING: " 649 "Disabling dynamic standby mode in EEPROM " 650 "to work around a\n", 651 sc->sc_dev.dv_xname); 652 aprint_normal( 653 "%s: WARNING: hardware bug. You must reset " 654 "the system before using this\n", 655 sc->sc_dev.dv_xname); 656 aprint_normal("%s: WARNING: interface.\n", 657 sc->sc_dev.dv_xname); 658 data &= ~0x02; 659 fxp_write_eeprom(sc, &data, 10, 1); 660 aprint_normal("%s: new EEPROM ID: 0x%04x\n", 661 sc->sc_dev.dv_xname, data); 662 fxp_eeprom_update_cksum(sc); 663 } 664 } 665 666 /* Receiver lock-up workaround detection. (FXPF_RECV_WORKAROUND) */ 667 /* Due to false positives we make it conditional on setting link1 */ 668 fxp_read_eeprom(sc, &data, 3, 1); 669 if ((data & 0x03) != 0x03) { 670 aprint_verbose("%s: May need receiver lock-up workaround\n", 671 sc->sc_dev.dv_xname); 672 } 673 } 674 675 static void 676 fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int len) 677 { 678 uint16_t reg; 679 int x; 680 681 for (x = 1 << (len - 1); x != 0; x >>= 1) { 682 DELAY(40); 683 if (data & x) 684 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 685 else 686 reg = FXP_EEPROM_EECS; 687 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 688 DELAY(40); 689 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 690 reg | FXP_EEPROM_EESK); 691 DELAY(40); 692 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 693 } 694 DELAY(40); 695 } 696 697 /* 698 * Figure out EEPROM size. 699 * 700 * 559's can have either 64-word or 256-word EEPROMs, the 558 701 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet 702 * talks about the existence of 16 to 256 word EEPROMs. 703 * 704 * The only known sizes are 64 and 256, where the 256 version is used 705 * by CardBus cards to store CIS information. 706 * 707 * The address is shifted in msb-to-lsb, and after the last 708 * address-bit the EEPROM is supposed to output a `dummy zero' bit, 709 * after which follows the actual data. We try to detect this zero, by 710 * probing the data-out bit in the EEPROM control register just after 711 * having shifted in a bit. If the bit is zero, we assume we've 712 * shifted enough address bits. The data-out should be tri-state, 713 * before this, which should translate to a logical one. 714 * 715 * Other ways to do this would be to try to read a register with known 716 * contents with a varying number of address bits, but no such 717 * register seem to be available. The high bits of register 10 are 01 718 * on the 558 and 559, but apparently not on the 557. 719 * 720 * The Linux driver computes a checksum on the EEPROM data, but the 721 * value of this checksum is not very well documented. 722 */ 723 724 void 725 fxp_autosize_eeprom(struct fxp_softc *sc) 726 { 727 int x; 728 729 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 730 DELAY(40); 731 732 /* Shift in read opcode. */ 733 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 734 735 /* 736 * Shift in address, wait for the dummy zero following a correct 737 * address shift. 738 */ 739 for (x = 1; x <= 8; x++) { 740 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 741 DELAY(40); 742 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 743 FXP_EEPROM_EECS | FXP_EEPROM_EESK); 744 DELAY(40); 745 if ((CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 746 FXP_EEPROM_EEDO) == 0) 747 break; 748 DELAY(40); 749 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 750 DELAY(40); 751 } 752 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 753 DELAY(40); 754 if (x != 6 && x != 8) { 755 #ifdef DEBUG 756 printf("%s: strange EEPROM size (%d)\n", 757 sc->sc_dev.dv_xname, 1 << x); 758 #endif 759 } else 760 sc->sc_eeprom_size = x; 761 } 762 763 /* 764 * Read from the serial EEPROM. Basically, you manually shift in 765 * the read opcode (one bit at a time) and then shift in the address, 766 * and then you shift out the data (all of this one bit at a time). 767 * The word size is 16 bits, so you have to provide the address for 768 * every 16 bits of data. 769 */ 770 void 771 fxp_read_eeprom(struct fxp_softc *sc, u_int16_t *data, int offset, int words) 772 { 773 u_int16_t reg; 774 int i, x; 775 776 for (i = 0; i < words; i++) { 777 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 778 779 /* Shift in read opcode. */ 780 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 781 782 /* Shift in address. */ 783 fxp_eeprom_shiftin(sc, i + offset, sc->sc_eeprom_size); 784 785 reg = FXP_EEPROM_EECS; 786 data[i] = 0; 787 788 /* Shift out data. */ 789 for (x = 16; x > 0; x--) { 790 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 791 reg | FXP_EEPROM_EESK); 792 DELAY(40); 793 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 794 FXP_EEPROM_EEDO) 795 data[i] |= (1 << (x - 1)); 796 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 797 DELAY(40); 798 } 799 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 800 DELAY(40); 801 } 802 } 803 804 /* 805 * Write data to the serial EEPROM. 806 */ 807 void 808 fxp_write_eeprom(struct fxp_softc *sc, u_int16_t *data, int offset, int words) 809 { 810 int i, j; 811 812 for (i = 0; i < words; i++) { 813 /* Erase/write enable. */ 814 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 815 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_ERASE, 3); 816 fxp_eeprom_shiftin(sc, 0x3 << (sc->sc_eeprom_size - 2), 817 sc->sc_eeprom_size); 818 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 819 DELAY(4); 820 821 /* Shift in write opcode, address, data. */ 822 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 823 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3); 824 fxp_eeprom_shiftin(sc, offset, sc->sc_eeprom_size); 825 fxp_eeprom_shiftin(sc, data[i], 16); 826 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 827 DELAY(4); 828 829 /* Wait for the EEPROM to finish up. */ 830 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 831 DELAY(4); 832 for (j = 0; j < 1000; j++) { 833 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 834 FXP_EEPROM_EEDO) 835 break; 836 DELAY(50); 837 } 838 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 839 DELAY(4); 840 841 /* Erase/write disable. */ 842 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 843 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_ERASE, 3); 844 fxp_eeprom_shiftin(sc, 0, sc->sc_eeprom_size); 845 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 846 DELAY(4); 847 } 848 } 849 850 /* 851 * Update the checksum of the EEPROM. 852 */ 853 void 854 fxp_eeprom_update_cksum(struct fxp_softc *sc) 855 { 856 int i; 857 uint16_t data, cksum; 858 859 cksum = 0; 860 for (i = 0; i < (1 << sc->sc_eeprom_size) - 1; i++) { 861 fxp_read_eeprom(sc, &data, i, 1); 862 cksum += data; 863 } 864 i = (1 << sc->sc_eeprom_size) - 1; 865 cksum = 0xbaba - cksum; 866 fxp_read_eeprom(sc, &data, i, 1); 867 fxp_write_eeprom(sc, &cksum, i, 1); 868 log(LOG_INFO, "%s: EEPROM checksum @ 0x%x: 0x%04x -> 0x%04x\n", 869 sc->sc_dev.dv_xname, i, data, cksum); 870 } 871 872 /* 873 * Start packet transmission on the interface. 874 */ 875 void 876 fxp_start(struct ifnet *ifp) 877 { 878 struct fxp_softc *sc = ifp->if_softc; 879 struct mbuf *m0, *m; 880 struct fxp_txdesc *txd; 881 struct fxp_txsoft *txs; 882 bus_dmamap_t dmamap; 883 int error, lasttx, nexttx, opending, seg; 884 885 /* 886 * If we want a re-init, bail out now. 887 */ 888 if (sc->sc_flags & FXPF_WANTINIT) { 889 ifp->if_flags |= IFF_OACTIVE; 890 return; 891 } 892 893 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) 894 return; 895 896 /* 897 * Remember the previous txpending and the current lasttx. 898 */ 899 opending = sc->sc_txpending; 900 lasttx = sc->sc_txlast; 901 902 /* 903 * Loop through the send queue, setting up transmit descriptors 904 * until we drain the queue, or use up all available transmit 905 * descriptors. 906 */ 907 for (;;) { 908 struct fxp_tbd *tbdp; 909 int csum_flags; 910 911 /* 912 * Grab a packet off the queue. 913 */ 914 IFQ_POLL(&ifp->if_snd, m0); 915 if (m0 == NULL) 916 break; 917 m = NULL; 918 919 if (sc->sc_txpending == FXP_NTXCB) { 920 FXP_EVCNT_INCR(&sc->sc_ev_txstall); 921 break; 922 } 923 924 /* 925 * Get the next available transmit descriptor. 926 */ 927 nexttx = FXP_NEXTTX(sc->sc_txlast); 928 txd = FXP_CDTX(sc, nexttx); 929 txs = FXP_DSTX(sc, nexttx); 930 dmamap = txs->txs_dmamap; 931 932 /* 933 * Load the DMA map. If this fails, the packet either 934 * didn't fit in the allotted number of frags, or we were 935 * short on resources. In this case, we'll copy and try 936 * again. 937 */ 938 if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 939 BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { 940 MGETHDR(m, M_DONTWAIT, MT_DATA); 941 if (m == NULL) { 942 log(LOG_ERR, "%s: unable to allocate Tx mbuf\n", 943 sc->sc_dev.dv_xname); 944 break; 945 } 946 MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner); 947 if (m0->m_pkthdr.len > MHLEN) { 948 MCLGET(m, M_DONTWAIT); 949 if ((m->m_flags & M_EXT) == 0) { 950 log(LOG_ERR, 951 "%s: unable to allocate Tx " 952 "cluster\n", sc->sc_dev.dv_xname); 953 m_freem(m); 954 break; 955 } 956 } 957 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 958 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 959 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 960 m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); 961 if (error) { 962 log(LOG_ERR, "%s: unable to load Tx buffer, " 963 "error = %d\n", sc->sc_dev.dv_xname, error); 964 break; 965 } 966 } 967 968 IFQ_DEQUEUE(&ifp->if_snd, m0); 969 csum_flags = m0->m_pkthdr.csum_flags; 970 if (m != NULL) { 971 m_freem(m0); 972 m0 = m; 973 } 974 975 /* Initialize the fraglist. */ 976 tbdp = txd->txd_tbd; 977 if (sc->sc_flags & FXPF_IPCB) 978 tbdp++; 979 for (seg = 0; seg < dmamap->dm_nsegs; seg++) { 980 tbdp[seg].tb_addr = 981 htole32(dmamap->dm_segs[seg].ds_addr); 982 tbdp[seg].tb_size = 983 htole32(dmamap->dm_segs[seg].ds_len); 984 } 985 986 /* Sync the DMA map. */ 987 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 988 BUS_DMASYNC_PREWRITE); 989 990 /* 991 * Store a pointer to the packet so we can free it later. 992 */ 993 txs->txs_mbuf = m0; 994 995 /* 996 * Initialize the transmit descriptor. 997 */ 998 /* BIG_ENDIAN: no need to swap to store 0 */ 999 txd->txd_txcb.cb_status = 0; 1000 txd->txd_txcb.cb_command = 1001 sc->sc_txcmd | htole16(FXP_CB_COMMAND_SF); 1002 txd->txd_txcb.tx_threshold = tx_threshold; 1003 txd->txd_txcb.tbd_number = dmamap->dm_nsegs; 1004 1005 KASSERT((csum_flags & (M_CSUM_TCPv6 | M_CSUM_UDPv6)) == 0); 1006 if (sc->sc_flags & FXPF_IPCB) { 1007 struct m_tag *vtag; 1008 struct fxp_ipcb *ipcb; 1009 /* 1010 * Deal with TCP/IP checksum offload. Note that 1011 * in order for TCP checksum offload to work, 1012 * the pseudo header checksum must have already 1013 * been computed and stored in the checksum field 1014 * in the TCP header. The stack should have 1015 * already done this for us. 1016 */ 1017 ipcb = &txd->txd_u.txdu_ipcb; 1018 memset(ipcb, 0, sizeof(*ipcb)); 1019 /* 1020 * always do hardware parsing. 1021 */ 1022 ipcb->ipcb_ip_activation_high = 1023 FXP_IPCB_HARDWAREPARSING_ENABLE; 1024 /* 1025 * ip checksum offloading. 1026 */ 1027 if (csum_flags & M_CSUM_IPv4) { 1028 ipcb->ipcb_ip_schedule |= 1029 FXP_IPCB_IP_CHECKSUM_ENABLE; 1030 } 1031 /* 1032 * TCP/UDP checksum offloading. 1033 */ 1034 if (csum_flags & (M_CSUM_TCPv4 | M_CSUM_UDPv4)) { 1035 ipcb->ipcb_ip_schedule |= 1036 FXP_IPCB_TCPUDP_CHECKSUM_ENABLE; 1037 } 1038 1039 /* 1040 * request VLAN tag insertion if needed. 1041 */ 1042 vtag = VLAN_OUTPUT_TAG(&sc->sc_ethercom, m0); 1043 if (vtag) { 1044 ipcb->ipcb_vlan_id = 1045 htobe16(*(u_int *)(vtag + 1)); 1046 ipcb->ipcb_ip_activation_high |= 1047 FXP_IPCB_INSERTVLAN_ENABLE; 1048 } 1049 } else { 1050 KASSERT((csum_flags & 1051 (M_CSUM_IPv4 | M_CSUM_TCPv4 | M_CSUM_UDPv4)) == 0); 1052 } 1053 1054 FXP_CDTXSYNC(sc, nexttx, 1055 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1056 1057 /* Advance the tx pointer. */ 1058 sc->sc_txpending++; 1059 sc->sc_txlast = nexttx; 1060 1061 #if NBPFILTER > 0 1062 /* 1063 * Pass packet to bpf if there is a listener. 1064 */ 1065 if (ifp->if_bpf) 1066 bpf_mtap(ifp->if_bpf, m0); 1067 #endif 1068 } 1069 1070 if (sc->sc_txpending == FXP_NTXCB) { 1071 /* No more slots; notify upper layer. */ 1072 ifp->if_flags |= IFF_OACTIVE; 1073 } 1074 1075 if (sc->sc_txpending != opending) { 1076 /* 1077 * We enqueued packets. If the transmitter was idle, 1078 * reset the txdirty pointer. 1079 */ 1080 if (opending == 0) 1081 sc->sc_txdirty = FXP_NEXTTX(lasttx); 1082 1083 /* 1084 * Cause the chip to interrupt and suspend command 1085 * processing once the last packet we've enqueued 1086 * has been transmitted. 1087 */ 1088 FXP_CDTX(sc, sc->sc_txlast)->txd_txcb.cb_command |= 1089 htole16(FXP_CB_COMMAND_I | FXP_CB_COMMAND_S); 1090 FXP_CDTXSYNC(sc, sc->sc_txlast, 1091 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1092 1093 /* 1094 * The entire packet chain is set up. Clear the suspend bit 1095 * on the command prior to the first packet we set up. 1096 */ 1097 FXP_CDTXSYNC(sc, lasttx, 1098 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1099 FXP_CDTX(sc, lasttx)->txd_txcb.cb_command &= 1100 htole16(~FXP_CB_COMMAND_S); 1101 FXP_CDTXSYNC(sc, lasttx, 1102 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1103 1104 /* 1105 * Issue a Resume command in case the chip was suspended. 1106 */ 1107 fxp_scb_wait(sc); 1108 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); 1109 1110 /* Set a watchdog timer in case the chip flakes out. */ 1111 ifp->if_timer = 5; 1112 } 1113 } 1114 1115 /* 1116 * Process interface interrupts. 1117 */ 1118 int 1119 fxp_intr(void *arg) 1120 { 1121 struct fxp_softc *sc = arg; 1122 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1123 bus_dmamap_t rxmap; 1124 int claimed = 0; 1125 u_int8_t statack; 1126 1127 if (!device_is_active(&sc->sc_dev) || sc->sc_enabled == 0) 1128 return (0); 1129 /* 1130 * If the interface isn't running, don't try to 1131 * service the interrupt.. just ack it and bail. 1132 */ 1133 if ((ifp->if_flags & IFF_RUNNING) == 0) { 1134 statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK); 1135 if (statack) { 1136 claimed = 1; 1137 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1138 } 1139 return (claimed); 1140 } 1141 1142 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) { 1143 claimed = 1; 1144 1145 /* 1146 * First ACK all the interrupts in this pass. 1147 */ 1148 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1149 1150 /* 1151 * Process receiver interrupts. If a no-resource (RNR) 1152 * condition exists, get whatever packets we can and 1153 * re-start the receiver. 1154 */ 1155 if (statack & (FXP_SCB_STATACK_FR | FXP_SCB_STATACK_RNR)) { 1156 FXP_EVCNT_INCR(&sc->sc_ev_rxintr); 1157 fxp_rxintr(sc); 1158 } 1159 1160 if (statack & FXP_SCB_STATACK_RNR) { 1161 fxp_scb_wait(sc); 1162 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_ABORT); 1163 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1164 fxp_scb_wait(sc); 1165 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1166 rxmap->dm_segs[0].ds_addr + 1167 RFA_ALIGNMENT_FUDGE); 1168 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1169 } 1170 1171 /* 1172 * Free any finished transmit mbuf chains. 1173 */ 1174 if (statack & (FXP_SCB_STATACK_CXTNO|FXP_SCB_STATACK_CNA)) { 1175 FXP_EVCNT_INCR(&sc->sc_ev_txintr); 1176 fxp_txintr(sc); 1177 1178 /* 1179 * Try to get more packets going. 1180 */ 1181 fxp_start(ifp); 1182 1183 if (sc->sc_txpending == 0) { 1184 /* 1185 * If we want a re-init, do that now. 1186 */ 1187 if (sc->sc_flags & FXPF_WANTINIT) 1188 (void) fxp_init(ifp); 1189 } 1190 } 1191 } 1192 1193 #if NRND > 0 1194 if (claimed) 1195 rnd_add_uint32(&sc->rnd_source, statack); 1196 #endif 1197 return (claimed); 1198 } 1199 1200 /* 1201 * Handle transmit completion interrupts. 1202 */ 1203 void 1204 fxp_txintr(struct fxp_softc *sc) 1205 { 1206 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1207 struct fxp_txdesc *txd; 1208 struct fxp_txsoft *txs; 1209 int i; 1210 u_int16_t txstat; 1211 1212 ifp->if_flags &= ~IFF_OACTIVE; 1213 for (i = sc->sc_txdirty; sc->sc_txpending != 0; 1214 i = FXP_NEXTTX(i), sc->sc_txpending--) { 1215 txd = FXP_CDTX(sc, i); 1216 txs = FXP_DSTX(sc, i); 1217 1218 FXP_CDTXSYNC(sc, i, 1219 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1220 1221 txstat = le16toh(txd->txd_txcb.cb_status); 1222 1223 if ((txstat & FXP_CB_STATUS_C) == 0) 1224 break; 1225 1226 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 1227 0, txs->txs_dmamap->dm_mapsize, 1228 BUS_DMASYNC_POSTWRITE); 1229 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1230 m_freem(txs->txs_mbuf); 1231 txs->txs_mbuf = NULL; 1232 } 1233 1234 /* Update the dirty transmit buffer pointer. */ 1235 sc->sc_txdirty = i; 1236 1237 /* 1238 * Cancel the watchdog timer if there are no pending 1239 * transmissions. 1240 */ 1241 if (sc->sc_txpending == 0) 1242 ifp->if_timer = 0; 1243 } 1244 1245 /* 1246 * fxp_rx_hwcksum: check status of H/W offloading for received packets. 1247 */ 1248 1249 int 1250 fxp_rx_hwcksum(struct mbuf *m, const struct fxp_rfa *rfa) 1251 { 1252 u_int16_t rxparsestat; 1253 u_int16_t csum_stat; 1254 u_int32_t csum_data; 1255 int csum_flags; 1256 1257 /* 1258 * check VLAN tag stripping. 1259 */ 1260 1261 if (rfa->rfa_status & htole16(FXP_RFA_STATUS_VLAN)) { 1262 struct m_tag *vtag; 1263 1264 vtag = m_tag_get(PACKET_TAG_VLAN, sizeof(u_int), M_NOWAIT); 1265 if (vtag == NULL) 1266 return ENOMEM; 1267 *(u_int *)(vtag + 1) = be16toh(rfa->vlan_id); 1268 m_tag_prepend(m, vtag); 1269 } 1270 1271 /* 1272 * check H/W Checksumming. 1273 */ 1274 1275 csum_stat = le16toh(rfa->cksum_stat); 1276 rxparsestat = le16toh(rfa->rx_parse_stat); 1277 if (!(rfa->rfa_status & htole16(FXP_RFA_STATUS_PARSE))) 1278 return 0; 1279 1280 csum_flags = 0; 1281 csum_data = 0; 1282 1283 if (csum_stat & FXP_RFDX_CS_IP_CSUM_BIT_VALID) { 1284 csum_flags = M_CSUM_IPv4; 1285 if (!(csum_stat & FXP_RFDX_CS_IP_CSUM_VALID)) 1286 csum_flags |= M_CSUM_IPv4_BAD; 1287 } 1288 1289 if (csum_stat & FXP_RFDX_CS_TCPUDP_CSUM_BIT_VALID) { 1290 csum_flags |= (M_CSUM_TCPv4|M_CSUM_UDPv4); /* XXX */ 1291 if (!(csum_stat & FXP_RFDX_CS_TCPUDP_CSUM_VALID)) 1292 csum_flags |= M_CSUM_TCP_UDP_BAD; 1293 } 1294 1295 m->m_pkthdr.csum_flags = csum_flags; 1296 m->m_pkthdr.csum_data = csum_data; 1297 1298 return 0; 1299 } 1300 1301 /* 1302 * Handle receive interrupts. 1303 */ 1304 void 1305 fxp_rxintr(struct fxp_softc *sc) 1306 { 1307 struct ethercom *ec = &sc->sc_ethercom; 1308 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1309 struct mbuf *m, *m0; 1310 bus_dmamap_t rxmap; 1311 struct fxp_rfa *rfa; 1312 u_int16_t len, rxstat; 1313 1314 for (;;) { 1315 m = sc->sc_rxq.ifq_head; 1316 rfa = FXP_MTORFA(m); 1317 rxmap = M_GETCTX(m, bus_dmamap_t); 1318 1319 FXP_RFASYNC(sc, m, 1320 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1321 1322 rxstat = le16toh(rfa->rfa_status); 1323 1324 if ((rxstat & FXP_RFA_STATUS_C) == 0) { 1325 /* 1326 * We have processed all of the 1327 * receive buffers. 1328 */ 1329 FXP_RFASYNC(sc, m, BUS_DMASYNC_PREREAD); 1330 return; 1331 } 1332 1333 IF_DEQUEUE(&sc->sc_rxq, m); 1334 1335 FXP_RXBUFSYNC(sc, m, BUS_DMASYNC_POSTREAD); 1336 1337 len = le16toh(rfa->actual_size) & 1338 (m->m_ext.ext_size - 1); 1339 1340 if (len < sizeof(struct ether_header)) { 1341 /* 1342 * Runt packet; drop it now. 1343 */ 1344 FXP_INIT_RFABUF(sc, m); 1345 continue; 1346 } 1347 1348 /* 1349 * If support for 802.1Q VLAN sized frames is 1350 * enabled, we need to do some additional error 1351 * checking (as we are saving bad frames, in 1352 * order to receive the larger ones). 1353 */ 1354 if ((ec->ec_capenable & ETHERCAP_VLAN_MTU) != 0 && 1355 (rxstat & (FXP_RFA_STATUS_OVERRUN| 1356 FXP_RFA_STATUS_RNR| 1357 FXP_RFA_STATUS_ALIGN| 1358 FXP_RFA_STATUS_CRC)) != 0) { 1359 FXP_INIT_RFABUF(sc, m); 1360 continue; 1361 } 1362 1363 /* Do checksum checking. */ 1364 m->m_pkthdr.csum_flags = 0; 1365 if (sc->sc_flags & FXPF_EXT_RFA) 1366 if (fxp_rx_hwcksum(m, rfa)) 1367 goto dropit; 1368 1369 /* 1370 * If the packet is small enough to fit in a 1371 * single header mbuf, allocate one and copy 1372 * the data into it. This greatly reduces 1373 * memory consumption when we receive lots 1374 * of small packets. 1375 * 1376 * Otherwise, we add a new buffer to the receive 1377 * chain. If this fails, we drop the packet and 1378 * recycle the old buffer. 1379 */ 1380 if (fxp_copy_small != 0 && len <= MHLEN) { 1381 MGETHDR(m0, M_DONTWAIT, MT_DATA); 1382 if (m0 == NULL) 1383 goto dropit; 1384 MCLAIM(m0, &sc->sc_ethercom.ec_rx_mowner); 1385 memcpy(mtod(m0, void *), 1386 mtod(m, void *), len); 1387 m0->m_pkthdr.csum_flags = m->m_pkthdr.csum_flags; 1388 m0->m_pkthdr.csum_data = m->m_pkthdr.csum_data; 1389 FXP_INIT_RFABUF(sc, m); 1390 m = m0; 1391 } else { 1392 if (fxp_add_rfabuf(sc, rxmap, 1) != 0) { 1393 dropit: 1394 ifp->if_ierrors++; 1395 FXP_INIT_RFABUF(sc, m); 1396 continue; 1397 } 1398 } 1399 1400 m->m_pkthdr.rcvif = ifp; 1401 m->m_pkthdr.len = m->m_len = len; 1402 1403 #if NBPFILTER > 0 1404 /* 1405 * Pass this up to any BPF listeners, but only 1406 * pass it up the stack it its for us. 1407 */ 1408 if (ifp->if_bpf) 1409 bpf_mtap(ifp->if_bpf, m); 1410 #endif 1411 1412 /* Pass it on. */ 1413 (*ifp->if_input)(ifp, m); 1414 } 1415 } 1416 1417 /* 1418 * Update packet in/out/collision statistics. The i82557 doesn't 1419 * allow you to access these counters without doing a fairly 1420 * expensive DMA to get _all_ of the statistics it maintains, so 1421 * we do this operation here only once per second. The statistics 1422 * counters in the kernel are updated from the previous dump-stats 1423 * DMA and then a new dump-stats DMA is started. The on-chip 1424 * counters are zeroed when the DMA completes. If we can't start 1425 * the DMA immediately, we don't wait - we just prepare to read 1426 * them again next time. 1427 */ 1428 void 1429 fxp_tick(void *arg) 1430 { 1431 struct fxp_softc *sc = arg; 1432 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1433 struct fxp_stats *sp = &sc->sc_control_data->fcd_stats; 1434 int s; 1435 1436 if (!device_is_active(&sc->sc_dev)) 1437 return; 1438 1439 s = splnet(); 1440 1441 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_POSTREAD); 1442 1443 ifp->if_opackets += le32toh(sp->tx_good); 1444 ifp->if_collisions += le32toh(sp->tx_total_collisions); 1445 if (sp->rx_good) { 1446 ifp->if_ipackets += le32toh(sp->rx_good); 1447 sc->sc_rxidle = 0; 1448 } else if (sc->sc_flags & FXPF_RECV_WORKAROUND) { 1449 sc->sc_rxidle++; 1450 } 1451 ifp->if_ierrors += 1452 le32toh(sp->rx_crc_errors) + 1453 le32toh(sp->rx_alignment_errors) + 1454 le32toh(sp->rx_rnr_errors) + 1455 le32toh(sp->rx_overrun_errors); 1456 /* 1457 * If any transmit underruns occurred, bump up the transmit 1458 * threshold by another 512 bytes (64 * 8). 1459 */ 1460 if (sp->tx_underruns) { 1461 ifp->if_oerrors += le32toh(sp->tx_underruns); 1462 if (tx_threshold < 192) 1463 tx_threshold += 64; 1464 } 1465 #ifdef FXP_EVENT_COUNTERS 1466 if (sc->sc_rev >= FXP_REV_82558_A4) { 1467 sc->sc_ev_txpause.ev_count += sp->tx_pauseframes; 1468 sc->sc_ev_rxpause.ev_count += sp->rx_pauseframes; 1469 } 1470 #endif 1471 1472 /* 1473 * If we haven't received any packets in FXP_MAX_RX_IDLE seconds, 1474 * then assume the receiver has locked up and attempt to clear 1475 * the condition by reprogramming the multicast filter (actually, 1476 * resetting the interface). This is a work-around for a bug in 1477 * the 82557 where the receiver locks up if it gets certain types 1478 * of garbage in the synchronization bits prior to the packet header. 1479 * This bug is supposed to only occur in 10Mbps mode, but has been 1480 * seen to occur in 100Mbps mode as well (perhaps due to a 10/100 1481 * speed transition). 1482 */ 1483 if (sc->sc_rxidle > FXP_MAX_RX_IDLE) { 1484 (void) fxp_init(ifp); 1485 splx(s); 1486 return; 1487 } 1488 /* 1489 * If there is no pending command, start another stats 1490 * dump. Otherwise punt for now. 1491 */ 1492 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) { 1493 /* 1494 * Start another stats dump. 1495 */ 1496 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1497 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET); 1498 } else { 1499 /* 1500 * A previous command is still waiting to be accepted. 1501 * Just zero our copy of the stats and wait for the 1502 * next timer event to update them. 1503 */ 1504 /* BIG_ENDIAN: no swap required to store 0 */ 1505 sp->tx_good = 0; 1506 sp->tx_underruns = 0; 1507 sp->tx_total_collisions = 0; 1508 1509 sp->rx_good = 0; 1510 sp->rx_crc_errors = 0; 1511 sp->rx_alignment_errors = 0; 1512 sp->rx_rnr_errors = 0; 1513 sp->rx_overrun_errors = 0; 1514 if (sc->sc_rev >= FXP_REV_82558_A4) { 1515 sp->tx_pauseframes = 0; 1516 sp->rx_pauseframes = 0; 1517 } 1518 } 1519 1520 if (sc->sc_flags & FXPF_MII) { 1521 /* Tick the MII clock. */ 1522 mii_tick(&sc->sc_mii); 1523 } 1524 1525 splx(s); 1526 1527 /* 1528 * Schedule another timeout one second from now. 1529 */ 1530 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 1531 } 1532 1533 /* 1534 * Drain the receive queue. 1535 */ 1536 void 1537 fxp_rxdrain(struct fxp_softc *sc) 1538 { 1539 bus_dmamap_t rxmap; 1540 struct mbuf *m; 1541 1542 for (;;) { 1543 IF_DEQUEUE(&sc->sc_rxq, m); 1544 if (m == NULL) 1545 break; 1546 rxmap = M_GETCTX(m, bus_dmamap_t); 1547 bus_dmamap_unload(sc->sc_dmat, rxmap); 1548 FXP_RXMAP_PUT(sc, rxmap); 1549 m_freem(m); 1550 } 1551 } 1552 1553 /* 1554 * Stop the interface. Cancels the statistics updater and resets 1555 * the interface. 1556 */ 1557 void 1558 fxp_stop(struct ifnet *ifp, int disable) 1559 { 1560 struct fxp_softc *sc = ifp->if_softc; 1561 struct fxp_txsoft *txs; 1562 int i; 1563 1564 /* 1565 * Turn down interface (done early to avoid bad interactions 1566 * between panics, shutdown hooks, and the watchdog timer) 1567 */ 1568 ifp->if_timer = 0; 1569 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1570 1571 /* 1572 * Cancel stats updater. 1573 */ 1574 callout_stop(&sc->sc_callout); 1575 if (sc->sc_flags & FXPF_MII) { 1576 /* Down the MII. */ 1577 mii_down(&sc->sc_mii); 1578 } 1579 1580 /* 1581 * Issue software reset. This unloads any microcode that 1582 * might already be loaded. 1583 */ 1584 sc->sc_flags &= ~FXPF_UCODE_LOADED; 1585 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET); 1586 DELAY(50); 1587 1588 /* 1589 * Release any xmit buffers. 1590 */ 1591 for (i = 0; i < FXP_NTXCB; i++) { 1592 txs = FXP_DSTX(sc, i); 1593 if (txs->txs_mbuf != NULL) { 1594 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1595 m_freem(txs->txs_mbuf); 1596 txs->txs_mbuf = NULL; 1597 } 1598 } 1599 sc->sc_txpending = 0; 1600 1601 if (disable) { 1602 fxp_rxdrain(sc); 1603 fxp_disable(sc); 1604 } 1605 1606 } 1607 1608 /* 1609 * Watchdog/transmission transmit timeout handler. Called when a 1610 * transmission is started on the interface, but no interrupt is 1611 * received before the timeout. This usually indicates that the 1612 * card has wedged for some reason. 1613 */ 1614 void 1615 fxp_watchdog(struct ifnet *ifp) 1616 { 1617 struct fxp_softc *sc = ifp->if_softc; 1618 1619 log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname); 1620 ifp->if_oerrors++; 1621 1622 (void) fxp_init(ifp); 1623 } 1624 1625 /* 1626 * Initialize the interface. Must be called at splnet(). 1627 */ 1628 int 1629 fxp_init(struct ifnet *ifp) 1630 { 1631 struct fxp_softc *sc = ifp->if_softc; 1632 struct fxp_cb_config *cbp; 1633 struct fxp_cb_ias *cb_ias; 1634 struct fxp_txdesc *txd; 1635 bus_dmamap_t rxmap; 1636 int i, prm, save_bf, lrxen, vlan_drop, allm, error = 0; 1637 1638 if ((error = fxp_enable(sc)) != 0) 1639 goto out; 1640 1641 /* 1642 * Cancel any pending I/O 1643 */ 1644 fxp_stop(ifp, 0); 1645 1646 /* 1647 * XXX just setting sc_flags to 0 here clears any FXPF_MII 1648 * flag, and this prevents the MII from detaching resulting in 1649 * a panic. The flags field should perhaps be split in runtime 1650 * flags and more static information. For now, just clear the 1651 * only other flag set. 1652 */ 1653 1654 sc->sc_flags &= ~FXPF_WANTINIT; 1655 1656 /* 1657 * Initialize base of CBL and RFA memory. Loading with zero 1658 * sets it up for regular linear addressing. 1659 */ 1660 fxp_scb_wait(sc); 1661 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0); 1662 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE); 1663 1664 fxp_scb_wait(sc); 1665 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE); 1666 1667 /* 1668 * Initialize the multicast filter. Do this now, since we might 1669 * have to setup the config block differently. 1670 */ 1671 fxp_mc_setup(sc); 1672 1673 prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; 1674 allm = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0; 1675 1676 /* 1677 * In order to support receiving 802.1Q VLAN frames, we have to 1678 * enable "save bad frames", since they are 4 bytes larger than 1679 * the normal Ethernet maximum frame length. On i82558 and later, 1680 * we have a better mechanism for this. 1681 */ 1682 save_bf = 0; 1683 lrxen = 0; 1684 vlan_drop = 0; 1685 if (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) { 1686 if (sc->sc_rev < FXP_REV_82558_A4) 1687 save_bf = 1; 1688 else 1689 lrxen = 1; 1690 if (sc->sc_rev >= FXP_REV_82550) 1691 vlan_drop = 1; 1692 } 1693 1694 /* 1695 * Initialize base of dump-stats buffer. 1696 */ 1697 fxp_scb_wait(sc); 1698 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1699 sc->sc_cddma + FXP_CDSTATSOFF); 1700 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1701 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR); 1702 1703 cbp = &sc->sc_control_data->fcd_configcb; 1704 memset(cbp, 0, sizeof(struct fxp_cb_config)); 1705 1706 /* 1707 * Load microcode for this controller. 1708 */ 1709 fxp_load_ucode(sc); 1710 1711 if ((sc->sc_ethercom.ec_if.if_flags & IFF_LINK1)) 1712 sc->sc_flags |= FXPF_RECV_WORKAROUND; 1713 else 1714 sc->sc_flags &= ~FXPF_RECV_WORKAROUND; 1715 1716 /* 1717 * This copy is kind of disgusting, but there are a bunch of must be 1718 * zero and must be one bits in this structure and this is the easiest 1719 * way to initialize them all to proper values. 1720 */ 1721 memcpy(cbp, fxp_cb_config_template, sizeof(fxp_cb_config_template)); 1722 1723 /* BIG_ENDIAN: no need to swap to store 0 */ 1724 cbp->cb_status = 0; 1725 cbp->cb_command = htole16(FXP_CB_COMMAND_CONFIG | 1726 FXP_CB_COMMAND_EL); 1727 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1728 cbp->link_addr = 0xffffffff; /* (no) next command */ 1729 /* bytes in config block */ 1730 cbp->byte_count = (sc->sc_flags & FXPF_EXT_RFA) ? 1731 FXP_EXT_CONFIG_LEN : FXP_CONFIG_LEN; 1732 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */ 1733 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */ 1734 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ 1735 cbp->mwi_enable = (sc->sc_flags & FXPF_MWI) ? 1 : 0; 1736 cbp->type_enable = 0; /* actually reserved */ 1737 cbp->read_align_en = (sc->sc_flags & FXPF_READ_ALIGN) ? 1 : 0; 1738 cbp->end_wr_on_cl = (sc->sc_flags & FXPF_WRITE_ALIGN) ? 1 : 0; 1739 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */ 1740 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */ 1741 cbp->dma_mbce = 0; /* (disable) dma max counters */ 1742 cbp->late_scb = 0; /* (don't) defer SCB update */ 1743 cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */ 1744 cbp->ci_int = 1; /* interrupt on CU idle */ 1745 cbp->ext_txcb_dis = (sc->sc_flags & FXPF_EXT_TXCB) ? 0 : 1; 1746 cbp->ext_stats_dis = 1; /* disable extended counters */ 1747 cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */ 1748 cbp->save_bf = save_bf;/* save bad frames */ 1749 cbp->disc_short_rx = !prm; /* discard short packets */ 1750 cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */ 1751 cbp->ext_rfa = (sc->sc_flags & FXPF_EXT_RFA) ? 1 : 0; 1752 cbp->two_frames = 0; /* do not limit FIFO to 2 frames */ 1753 cbp->dyn_tbd = 0; /* (no) dynamic TBD mode */ 1754 /* interface mode */ 1755 cbp->mediatype = (sc->sc_flags & FXPF_MII) ? 1 : 0; 1756 cbp->csma_dis = 0; /* (don't) disable link */ 1757 cbp->tcp_udp_cksum = 0; /* (don't) enable checksum */ 1758 cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */ 1759 cbp->link_wake_en = 0; /* (don't) assert PME# on link change */ 1760 cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */ 1761 cbp->mc_wake_en = 0; /* (don't) assert PME# on mcmatch */ 1762 cbp->nsai = 1; /* (don't) disable source addr insert */ 1763 cbp->preamble_length = 2; /* (7 byte) preamble */ 1764 cbp->loopback = 0; /* (don't) loopback */ 1765 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ 1766 cbp->linear_pri_mode = 0; /* (wait after xmit only) */ 1767 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ 1768 cbp->promiscuous = prm; /* promiscuous mode */ 1769 cbp->bcast_disable = 0; /* (don't) disable broadcasts */ 1770 cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/ 1771 cbp->ignore_ul = 0; /* consider U/L bit in IA matching */ 1772 cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */ 1773 cbp->crscdt = (sc->sc_flags & FXPF_MII) ? 0 : 1; 1774 cbp->stripping = !prm; /* truncate rx packet to byte count */ 1775 cbp->padding = 1; /* (do) pad short tx packets */ 1776 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ 1777 cbp->long_rx_en = lrxen; /* long packet receive enable */ 1778 cbp->ia_wake_en = 0; /* (don't) wake up on address match */ 1779 cbp->magic_pkt_dis = 0; /* (don't) disable magic packet */ 1780 /* must set wake_en in PMCSR also */ 1781 cbp->force_fdx = 0; /* (don't) force full duplex */ 1782 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ 1783 cbp->multi_ia = 0; /* (don't) accept multiple IAs */ 1784 cbp->mc_all = allm; /* accept all multicasts */ 1785 cbp->ext_rx_mode = (sc->sc_flags & FXPF_EXT_RFA) ? 1 : 0; 1786 cbp->vlan_drop_en = vlan_drop; 1787 1788 if (sc->sc_rev < FXP_REV_82558_A4) { 1789 /* 1790 * The i82557 has no hardware flow control, the values 1791 * here are the defaults for the chip. 1792 */ 1793 cbp->fc_delay_lsb = 0; 1794 cbp->fc_delay_msb = 0x40; 1795 cbp->pri_fc_thresh = 3; 1796 cbp->tx_fc_dis = 0; 1797 cbp->rx_fc_restop = 0; 1798 cbp->rx_fc_restart = 0; 1799 cbp->fc_filter = 0; 1800 cbp->pri_fc_loc = 1; 1801 } else { 1802 cbp->fc_delay_lsb = 0x1f; 1803 cbp->fc_delay_msb = 0x01; 1804 cbp->pri_fc_thresh = 3; 1805 cbp->tx_fc_dis = 0; /* enable transmit FC */ 1806 cbp->rx_fc_restop = 1; /* enable FC restop frames */ 1807 cbp->rx_fc_restart = 1; /* enable FC restart frames */ 1808 cbp->fc_filter = !prm; /* drop FC frames to host */ 1809 cbp->pri_fc_loc = 1; /* FC pri location (byte31) */ 1810 cbp->ext_stats_dis = 0; /* enable extended stats */ 1811 } 1812 1813 FXP_CDCONFIGSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1814 1815 /* 1816 * Start the config command/DMA. 1817 */ 1818 fxp_scb_wait(sc); 1819 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDCONFIGOFF); 1820 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1821 /* ...and wait for it to complete. */ 1822 i = 1000; 1823 do { 1824 FXP_CDCONFIGSYNC(sc, 1825 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1826 DELAY(1); 1827 } while ((le16toh(cbp->cb_status) & FXP_CB_STATUS_C) == 0 && --i); 1828 if (i == 0) { 1829 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 1830 sc->sc_dev.dv_xname, __LINE__); 1831 return (ETIMEDOUT); 1832 } 1833 1834 /* 1835 * Initialize the station address. 1836 */ 1837 cb_ias = &sc->sc_control_data->fcd_iascb; 1838 /* BIG_ENDIAN: no need to swap to store 0 */ 1839 cb_ias->cb_status = 0; 1840 cb_ias->cb_command = htole16(FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL); 1841 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1842 cb_ias->link_addr = 0xffffffff; 1843 memcpy(cb_ias->macaddr, LLADDR(ifp->if_sadl), ETHER_ADDR_LEN); 1844 1845 FXP_CDIASSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1846 1847 /* 1848 * Start the IAS (Individual Address Setup) command/DMA. 1849 */ 1850 fxp_scb_wait(sc); 1851 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDIASOFF); 1852 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1853 /* ...and wait for it to complete. */ 1854 i = 1000; 1855 do { 1856 FXP_CDIASSYNC(sc, 1857 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1858 DELAY(1); 1859 } while ((le16toh(cb_ias->cb_status) & FXP_CB_STATUS_C) == 0 && --i); 1860 if (i == 0) { 1861 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 1862 sc->sc_dev.dv_xname, __LINE__); 1863 return (ETIMEDOUT); 1864 } 1865 1866 /* 1867 * Initialize the transmit descriptor ring. txlast is initialized 1868 * to the end of the list so that it will wrap around to the first 1869 * descriptor when the first packet is transmitted. 1870 */ 1871 for (i = 0; i < FXP_NTXCB; i++) { 1872 txd = FXP_CDTX(sc, i); 1873 memset(txd, 0, sizeof(*txd)); 1874 txd->txd_txcb.cb_command = 1875 htole16(FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S); 1876 txd->txd_txcb.link_addr = 1877 htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(i))); 1878 if (sc->sc_flags & FXPF_EXT_TXCB) 1879 txd->txd_txcb.tbd_array_addr = 1880 htole32(FXP_CDTBDADDR(sc, i) + 1881 (2 * sizeof(struct fxp_tbd))); 1882 else 1883 txd->txd_txcb.tbd_array_addr = 1884 htole32(FXP_CDTBDADDR(sc, i)); 1885 FXP_CDTXSYNC(sc, i, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1886 } 1887 sc->sc_txpending = 0; 1888 sc->sc_txdirty = 0; 1889 sc->sc_txlast = FXP_NTXCB - 1; 1890 1891 /* 1892 * Initialize the receive buffer list. 1893 */ 1894 sc->sc_rxq.ifq_maxlen = FXP_NRFABUFS; 1895 while (sc->sc_rxq.ifq_len < FXP_NRFABUFS) { 1896 rxmap = FXP_RXMAP_GET(sc); 1897 if ((error = fxp_add_rfabuf(sc, rxmap, 0)) != 0) { 1898 log(LOG_ERR, "%s: unable to allocate or map rx " 1899 "buffer %d, error = %d\n", 1900 sc->sc_dev.dv_xname, 1901 sc->sc_rxq.ifq_len, error); 1902 /* 1903 * XXX Should attempt to run with fewer receive 1904 * XXX buffers instead of just failing. 1905 */ 1906 FXP_RXMAP_PUT(sc, rxmap); 1907 fxp_rxdrain(sc); 1908 goto out; 1909 } 1910 } 1911 sc->sc_rxidle = 0; 1912 1913 /* 1914 * Give the transmit ring to the chip. We do this by pointing 1915 * the chip at the last descriptor (which is a NOP|SUSPEND), and 1916 * issuing a start command. It will execute the NOP and then 1917 * suspend, pointing at the first descriptor. 1918 */ 1919 fxp_scb_wait(sc); 1920 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, FXP_CDTXADDR(sc, sc->sc_txlast)); 1921 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1922 1923 /* 1924 * Initialize receiver buffer area - RFA. 1925 */ 1926 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1927 fxp_scb_wait(sc); 1928 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1929 rxmap->dm_segs[0].ds_addr + RFA_ALIGNMENT_FUDGE); 1930 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1931 1932 if (sc->sc_flags & FXPF_MII) { 1933 /* 1934 * Set current media. 1935 */ 1936 mii_mediachg(&sc->sc_mii); 1937 } 1938 1939 /* 1940 * ...all done! 1941 */ 1942 ifp->if_flags |= IFF_RUNNING; 1943 ifp->if_flags &= ~IFF_OACTIVE; 1944 1945 /* 1946 * Start the one second timer. 1947 */ 1948 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 1949 1950 /* 1951 * Attempt to start output on the interface. 1952 */ 1953 fxp_start(ifp); 1954 1955 out: 1956 if (error) { 1957 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1958 ifp->if_timer = 0; 1959 log(LOG_ERR, "%s: interface not running\n", 1960 sc->sc_dev.dv_xname); 1961 } 1962 return (error); 1963 } 1964 1965 /* 1966 * Change media according to request. 1967 */ 1968 int 1969 fxp_mii_mediachange(struct ifnet *ifp) 1970 { 1971 struct fxp_softc *sc = ifp->if_softc; 1972 1973 if (ifp->if_flags & IFF_UP) 1974 mii_mediachg(&sc->sc_mii); 1975 return (0); 1976 } 1977 1978 /* 1979 * Notify the world which media we're using. 1980 */ 1981 void 1982 fxp_mii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 1983 { 1984 struct fxp_softc *sc = ifp->if_softc; 1985 1986 if (sc->sc_enabled == 0) { 1987 ifmr->ifm_active = IFM_ETHER | IFM_NONE; 1988 ifmr->ifm_status = 0; 1989 return; 1990 } 1991 1992 mii_pollstat(&sc->sc_mii); 1993 ifmr->ifm_status = sc->sc_mii.mii_media_status; 1994 ifmr->ifm_active = sc->sc_mii.mii_media_active; 1995 1996 /* 1997 * XXX Flow control is always turned on if the chip supports 1998 * XXX it; we can't easily control it dynamically, since it 1999 * XXX requires sending a setup packet. 2000 */ 2001 if (sc->sc_rev >= FXP_REV_82558_A4) 2002 ifmr->ifm_active |= IFM_FLOW|IFM_ETH_TXPAUSE|IFM_ETH_RXPAUSE; 2003 } 2004 2005 int 2006 fxp_80c24_mediachange(struct ifnet *ifp) 2007 { 2008 2009 /* Nothing to do here. */ 2010 return (0); 2011 } 2012 2013 void 2014 fxp_80c24_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 2015 { 2016 struct fxp_softc *sc = ifp->if_softc; 2017 2018 /* 2019 * Media is currently-selected media. We cannot determine 2020 * the link status. 2021 */ 2022 ifmr->ifm_status = 0; 2023 ifmr->ifm_active = sc->sc_mii.mii_media.ifm_cur->ifm_media; 2024 } 2025 2026 /* 2027 * Add a buffer to the end of the RFA buffer list. 2028 * Return 0 if successful, error code on failure. 2029 * 2030 * The RFA struct is stuck at the beginning of mbuf cluster and the 2031 * data pointer is fixed up to point just past it. 2032 */ 2033 int 2034 fxp_add_rfabuf(struct fxp_softc *sc, bus_dmamap_t rxmap, int unload) 2035 { 2036 struct mbuf *m; 2037 int error; 2038 2039 MGETHDR(m, M_DONTWAIT, MT_DATA); 2040 if (m == NULL) 2041 return (ENOBUFS); 2042 2043 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner); 2044 MCLGET(m, M_DONTWAIT); 2045 if ((m->m_flags & M_EXT) == 0) { 2046 m_freem(m); 2047 return (ENOBUFS); 2048 } 2049 2050 if (unload) 2051 bus_dmamap_unload(sc->sc_dmat, rxmap); 2052 2053 M_SETCTX(m, rxmap); 2054 2055 m->m_len = m->m_pkthdr.len = m->m_ext.ext_size; 2056 error = bus_dmamap_load_mbuf(sc->sc_dmat, rxmap, m, 2057 BUS_DMA_READ|BUS_DMA_NOWAIT); 2058 if (error) { 2059 /* XXX XXX XXX */ 2060 printf("%s: can't load rx DMA map %d, error = %d\n", 2061 sc->sc_dev.dv_xname, sc->sc_rxq.ifq_len, error); 2062 panic("fxp_add_rfabuf"); 2063 } 2064 2065 FXP_INIT_RFABUF(sc, m); 2066 2067 return (0); 2068 } 2069 2070 int 2071 fxp_mdi_read(struct device *self, int phy, int reg) 2072 { 2073 struct fxp_softc *sc = (struct fxp_softc *)self; 2074 int count = 10000; 2075 int value; 2076 2077 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2078 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21)); 2079 2080 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 2081 0x10000000) == 0 && count--) 2082 DELAY(10); 2083 2084 if (count <= 0) 2085 log(LOG_WARNING, 2086 "%s: fxp_mdi_read: timed out\n", sc->sc_dev.dv_xname); 2087 2088 return (value & 0xffff); 2089 } 2090 2091 void 2092 fxp_statchg(struct device *self) 2093 { 2094 2095 /* Nothing to do. */ 2096 } 2097 2098 void 2099 fxp_mdi_write(struct device *self, int phy, int reg, int value) 2100 { 2101 struct fxp_softc *sc = (struct fxp_softc *)self; 2102 int count = 10000; 2103 2104 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2105 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) | 2106 (value & 0xffff)); 2107 2108 while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 && 2109 count--) 2110 DELAY(10); 2111 2112 if (count <= 0) 2113 log(LOG_WARNING, 2114 "%s: fxp_mdi_write: timed out\n", sc->sc_dev.dv_xname); 2115 } 2116 2117 int 2118 fxp_ioctl(struct ifnet *ifp, u_long cmd, void *data) 2119 { 2120 struct fxp_softc *sc = ifp->if_softc; 2121 struct ifreq *ifr = (struct ifreq *)data; 2122 int s, error; 2123 2124 s = splnet(); 2125 2126 switch (cmd) { 2127 case SIOCSIFMEDIA: 2128 case SIOCGIFMEDIA: 2129 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); 2130 break; 2131 2132 default: 2133 error = ether_ioctl(ifp, cmd, data); 2134 if (error == ENETRESET) { 2135 if (ifp->if_flags & IFF_RUNNING) { 2136 /* 2137 * Multicast list has changed; set the 2138 * hardware filter accordingly. 2139 */ 2140 if (sc->sc_txpending) { 2141 sc->sc_flags |= FXPF_WANTINIT; 2142 error = 0; 2143 } else 2144 error = fxp_init(ifp); 2145 } else 2146 error = 0; 2147 } 2148 break; 2149 } 2150 2151 /* Try to get more packets going. */ 2152 if (sc->sc_enabled) 2153 fxp_start(ifp); 2154 2155 splx(s); 2156 return (error); 2157 } 2158 2159 /* 2160 * Program the multicast filter. 2161 * 2162 * This function must be called at splnet(). 2163 */ 2164 void 2165 fxp_mc_setup(struct fxp_softc *sc) 2166 { 2167 struct fxp_cb_mcs *mcsp = &sc->sc_control_data->fcd_mcscb; 2168 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2169 struct ethercom *ec = &sc->sc_ethercom; 2170 struct ether_multi *enm; 2171 struct ether_multistep step; 2172 int count, nmcasts; 2173 2174 #ifdef DIAGNOSTIC 2175 if (sc->sc_txpending) 2176 panic("fxp_mc_setup: pending transmissions"); 2177 #endif 2178 2179 ifp->if_flags &= ~IFF_ALLMULTI; 2180 2181 /* 2182 * Initialize multicast setup descriptor. 2183 */ 2184 nmcasts = 0; 2185 ETHER_FIRST_MULTI(step, ec, enm); 2186 while (enm != NULL) { 2187 /* 2188 * Check for too many multicast addresses or if we're 2189 * listening to a range. Either way, we simply have 2190 * to accept all multicasts. 2191 */ 2192 if (nmcasts >= MAXMCADDR || 2193 memcmp(enm->enm_addrlo, enm->enm_addrhi, 2194 ETHER_ADDR_LEN) != 0) { 2195 /* 2196 * Callers of this function must do the 2197 * right thing with this. If we're called 2198 * from outside fxp_init(), the caller must 2199 * detect if the state if IFF_ALLMULTI changes. 2200 * If it does, the caller must then call 2201 * fxp_init(), since allmulti is handled by 2202 * the config block. 2203 */ 2204 ifp->if_flags |= IFF_ALLMULTI; 2205 return; 2206 } 2207 memcpy(&mcsp->mc_addr[nmcasts][0], enm->enm_addrlo, 2208 ETHER_ADDR_LEN); 2209 nmcasts++; 2210 ETHER_NEXT_MULTI(step, enm); 2211 } 2212 2213 /* BIG_ENDIAN: no need to swap to store 0 */ 2214 mcsp->cb_status = 0; 2215 mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL); 2216 mcsp->link_addr = htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(sc->sc_txlast))); 2217 mcsp->mc_cnt = htole16(nmcasts * ETHER_ADDR_LEN); 2218 2219 FXP_CDMCSSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2220 2221 /* 2222 * Wait until the command unit is not active. This should never 2223 * happen since nothing is queued, but make sure anyway. 2224 */ 2225 count = 100; 2226 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) == 2227 FXP_SCB_CUS_ACTIVE && --count) 2228 DELAY(1); 2229 if (count == 0) { 2230 log(LOG_WARNING, "%s: line %d: command queue timeout\n", 2231 sc->sc_dev.dv_xname, __LINE__); 2232 return; 2233 } 2234 2235 /* 2236 * Start the multicast setup command/DMA. 2237 */ 2238 fxp_scb_wait(sc); 2239 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDMCSOFF); 2240 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2241 2242 /* ...and wait for it to complete. */ 2243 count = 1000; 2244 do { 2245 FXP_CDMCSSYNC(sc, 2246 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2247 DELAY(1); 2248 } while ((le16toh(mcsp->cb_status) & FXP_CB_STATUS_C) == 0 && --count); 2249 if (count == 0) { 2250 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 2251 sc->sc_dev.dv_xname, __LINE__); 2252 return; 2253 } 2254 } 2255 2256 static const uint32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE; 2257 static const uint32_t fxp_ucode_d101b0[] = D101_B0_RCVBUNDLE_UCODE; 2258 static const uint32_t fxp_ucode_d101ma[] = D101M_B_RCVBUNDLE_UCODE; 2259 static const uint32_t fxp_ucode_d101s[] = D101S_RCVBUNDLE_UCODE; 2260 static const uint32_t fxp_ucode_d102[] = D102_B_RCVBUNDLE_UCODE; 2261 static const uint32_t fxp_ucode_d102c[] = D102_C_RCVBUNDLE_UCODE; 2262 2263 #define UCODE(x) x, sizeof(x)/sizeof(uint32_t) 2264 2265 static const struct ucode { 2266 int32_t revision; 2267 const uint32_t *ucode; 2268 size_t length; 2269 uint16_t int_delay_offset; 2270 uint16_t bundle_max_offset; 2271 } ucode_table[] = { 2272 { FXP_REV_82558_A4, UCODE(fxp_ucode_d101a), 2273 D101_CPUSAVER_DWORD, 0 }, 2274 2275 { FXP_REV_82558_B0, UCODE(fxp_ucode_d101b0), 2276 D101_CPUSAVER_DWORD, 0 }, 2277 2278 { FXP_REV_82559_A0, UCODE(fxp_ucode_d101ma), 2279 D101M_CPUSAVER_DWORD, D101M_CPUSAVER_BUNDLE_MAX_DWORD }, 2280 2281 { FXP_REV_82559S_A, UCODE(fxp_ucode_d101s), 2282 D101S_CPUSAVER_DWORD, D101S_CPUSAVER_BUNDLE_MAX_DWORD }, 2283 2284 { FXP_REV_82550, UCODE(fxp_ucode_d102), 2285 D102_B_CPUSAVER_DWORD, D102_B_CPUSAVER_BUNDLE_MAX_DWORD }, 2286 2287 { FXP_REV_82550_C, UCODE(fxp_ucode_d102c), 2288 D102_C_CPUSAVER_DWORD, D102_C_CPUSAVER_BUNDLE_MAX_DWORD }, 2289 2290 { 0, NULL, 0, 0, 0 } 2291 }; 2292 2293 void 2294 fxp_load_ucode(struct fxp_softc *sc) 2295 { 2296 const struct ucode *uc; 2297 struct fxp_cb_ucode *cbp = &sc->sc_control_data->fcd_ucode; 2298 int count, i; 2299 2300 if (sc->sc_flags & FXPF_UCODE_LOADED) 2301 return; 2302 2303 /* 2304 * Only load the uCode if the user has requested that 2305 * we do so. 2306 */ 2307 if ((sc->sc_ethercom.ec_if.if_flags & IFF_LINK0) == 0) { 2308 sc->sc_int_delay = 0; 2309 sc->sc_bundle_max = 0; 2310 return; 2311 } 2312 2313 for (uc = ucode_table; uc->ucode != NULL; uc++) { 2314 if (sc->sc_rev == uc->revision) 2315 break; 2316 } 2317 if (uc->ucode == NULL) 2318 return; 2319 2320 /* BIG ENDIAN: no need to swap to store 0 */ 2321 cbp->cb_status = 0; 2322 cbp->cb_command = htole16(FXP_CB_COMMAND_UCODE | FXP_CB_COMMAND_EL); 2323 cbp->link_addr = 0xffffffff; /* (no) next command */ 2324 for (i = 0; i < uc->length; i++) 2325 cbp->ucode[i] = htole32(uc->ucode[i]); 2326 2327 if (uc->int_delay_offset) 2328 *(volatile uint16_t *) &cbp->ucode[uc->int_delay_offset] = 2329 htole16(fxp_int_delay + (fxp_int_delay / 2)); 2330 2331 if (uc->bundle_max_offset) 2332 *(volatile uint16_t *) &cbp->ucode[uc->bundle_max_offset] = 2333 htole16(fxp_bundle_max); 2334 2335 FXP_CDUCODESYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2336 2337 /* 2338 * Download the uCode to the chip. 2339 */ 2340 fxp_scb_wait(sc); 2341 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDUCODEOFF); 2342 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2343 2344 /* ...and wait for it to complete. */ 2345 count = 10000; 2346 do { 2347 FXP_CDUCODESYNC(sc, 2348 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2349 DELAY(2); 2350 } while ((le16toh(cbp->cb_status) & FXP_CB_STATUS_C) == 0 && --count); 2351 if (count == 0) { 2352 sc->sc_int_delay = 0; 2353 sc->sc_bundle_max = 0; 2354 log(LOG_WARNING, "%s: timeout loading microcode\n", 2355 sc->sc_dev.dv_xname); 2356 return; 2357 } 2358 2359 if (sc->sc_int_delay != fxp_int_delay || 2360 sc->sc_bundle_max != fxp_bundle_max) { 2361 sc->sc_int_delay = fxp_int_delay; 2362 sc->sc_bundle_max = fxp_bundle_max; 2363 log(LOG_INFO, "%s: Microcode loaded: int delay: %d usec, " 2364 "max bundle: %d\n", sc->sc_dev.dv_xname, 2365 sc->sc_int_delay, 2366 uc->bundle_max_offset == 0 ? 0 : sc->sc_bundle_max); 2367 } 2368 2369 sc->sc_flags |= FXPF_UCODE_LOADED; 2370 } 2371 2372 int 2373 fxp_enable(struct fxp_softc *sc) 2374 { 2375 2376 if (sc->sc_enabled == 0 && sc->sc_enable != NULL) { 2377 if ((*sc->sc_enable)(sc) != 0) { 2378 log(LOG_ERR, "%s: device enable failed\n", 2379 sc->sc_dev.dv_xname); 2380 return (EIO); 2381 } 2382 } 2383 2384 sc->sc_enabled = 1; 2385 return (0); 2386 } 2387 2388 void 2389 fxp_disable(struct fxp_softc *sc) 2390 { 2391 2392 if (sc->sc_enabled != 0 && sc->sc_disable != NULL) { 2393 (*sc->sc_disable)(sc); 2394 sc->sc_enabled = 0; 2395 } 2396 } 2397 2398 /* 2399 * fxp_activate: 2400 * 2401 * Handle device activation/deactivation requests. 2402 */ 2403 int 2404 fxp_activate(struct device *self, enum devact act) 2405 { 2406 struct fxp_softc *sc = (void *) self; 2407 int s, error = 0; 2408 2409 s = splnet(); 2410 switch (act) { 2411 case DVACT_ACTIVATE: 2412 error = EOPNOTSUPP; 2413 break; 2414 2415 case DVACT_DEACTIVATE: 2416 if (sc->sc_flags & FXPF_MII) 2417 mii_activate(&sc->sc_mii, act, MII_PHY_ANY, 2418 MII_OFFSET_ANY); 2419 if_deactivate(&sc->sc_ethercom.ec_if); 2420 break; 2421 } 2422 splx(s); 2423 2424 return (error); 2425 } 2426 2427 /* 2428 * fxp_detach: 2429 * 2430 * Detach an i82557 interface. 2431 */ 2432 int 2433 fxp_detach(struct fxp_softc *sc) 2434 { 2435 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2436 int i; 2437 2438 /* Succeed now if there's no work to do. */ 2439 if ((sc->sc_flags & FXPF_ATTACHED) == 0) 2440 return (0); 2441 2442 /* Unhook our tick handler. */ 2443 callout_stop(&sc->sc_callout); 2444 2445 if (sc->sc_flags & FXPF_MII) { 2446 /* Detach all PHYs */ 2447 mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); 2448 } 2449 2450 /* Delete all remaining media. */ 2451 ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY); 2452 2453 #if NRND > 0 2454 rnd_detach_source(&sc->rnd_source); 2455 #endif 2456 ether_ifdetach(ifp); 2457 if_detach(ifp); 2458 2459 for (i = 0; i < FXP_NRFABUFS; i++) { 2460 bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmaps[i]); 2461 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 2462 } 2463 2464 for (i = 0; i < FXP_NTXCB; i++) { 2465 bus_dmamap_unload(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 2466 bus_dmamap_destroy(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 2467 } 2468 2469 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 2470 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 2471 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 2472 sizeof(struct fxp_control_data)); 2473 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 2474 2475 shutdownhook_disestablish(sc->sc_sdhook); 2476 powerhook_disestablish(sc->sc_powerhook); 2477 2478 return (0); 2479 } 2480
Indexes created Tue Sep 30 10:09:55 GMT 2025