isp.c revision 1.34
1 /* $NetBSD: isp.c,v 1.34 1999/03/26 22:39:44 mjacob Exp $ */ 2 /* release_03_25_99 */ 3 /* 4 * Machine and OS Independent (well, as best as possible) 5 * code for the Qlogic ISP SCSI adapters. 6 * 7 * Copyright (c) 1997, 1998 by Matthew Jacob 8 * NASA/Ames Research Center 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice immediately at the beginning of the file, without modification, 16 * this list of conditions, and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35 36 /* 37 * Inspiration and ideas about this driver are from Erik Moe's Linux driver 38 * (qlogicisp.c) and Dave Miller's SBus version of same (qlogicisp.c). Some 39 * ideas dredged from the Solaris driver. 40 */ 41 42 /* 43 * Include header file appropriate for platform we're building on. 44 */ 45 46 #ifdef __NetBSD__ 47 #include <dev/ic/isp_netbsd.h> 48 #endif 49 #ifdef __FreeBSD__ 50 #include <dev/isp/isp_freebsd.h> 51 #endif 52 #ifdef __OpenBSD__ 53 #include <dev/ic/isp_openbsd.h> 54 #endif 55 #ifdef __linux__ 56 #include "isp_linux.h" 57 #endif 58 59 /* 60 * General defines 61 */ 62 63 #define MBOX_DELAY_COUNT 1000000 / 100 64 65 /* 66 * Local static data 67 */ 68 #ifdef ISP_TARGET_MODE 69 static const char tgtiqd[36] = { 70 0x03, 0x00, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 71 0x51, 0x4C, 0x4F, 0x47, 0x49, 0x43, 0x20, 0x20, 72 #ifdef __NetBSD__ 73 0x4E, 0x45, 0x54, 0x42, 0x53, 0x44, 0x20, 0x20, 74 #else 75 # ifdef __FreeBSD__ 76 0x46, 0x52, 0x45, 0x45, 0x42, 0x52, 0x44, 0x20, 77 # else 78 # ifdef __OpenBSD__ 79 0x4F, 0x50, 0x45, 0x4E, 0x42, 0x52, 0x44, 0x20, 80 # else 81 # ifdef linux 82 0x4C, 0x49, 0x4E, 0x55, 0x58, 0x20, 0x20, 0x20, 83 # else 84 # endif 85 # endif 86 # endif 87 #endif 88 0x54, 0x41, 0x52, 0x47, 0x45, 0x54, 0x20, 0x20, 89 0x20, 0x20, 0x20, 0x31 90 }; 91 #endif 92 93 94 /* 95 * Local function prototypes. 96 */ 97 static int isp_parse_async __P((struct ispsoftc *, int)); 98 static int isp_handle_other_response 99 __P((struct ispsoftc *, ispstatusreq_t *, u_int8_t *)); 100 #ifdef ISP_TARGET_MODE 101 static int isp_modify_lun __P((struct ispsoftc *, int, int, int)); 102 static void isp_notify_ack __P((struct ispsoftc *, void *)); 103 static void isp_handle_atio __P((struct ispsoftc *, void *)); 104 static void isp_handle_atio2 __P((struct ispsoftc *, void *)); 105 static void isp_handle_ctio __P((struct ispsoftc *, void *)); 106 static void isp_handle_ctio2 __P((struct ispsoftc *, void *)); 107 #endif 108 static void isp_parse_status 109 __P((struct ispsoftc *, ispstatusreq_t *, ISP_SCSI_XFER_T *)); 110 static void isp_fastpost_complete __P((struct ispsoftc *, int)); 111 static void isp_fibre_init __P((struct ispsoftc *)); 112 static void isp_mark_getpdb_all __P((struct ispsoftc *)); 113 static int isp_getpdb __P((struct ispsoftc *, int, isp_pdb_t *)); 114 static int isp_fclink_test __P((struct ispsoftc *, int)); 115 static void isp_fw_state __P((struct ispsoftc *)); 116 static void isp_dumpregs __P((struct ispsoftc *, const char *)); 117 static void isp_dumpxflist __P((struct ispsoftc *)); 118 static void isp_mboxcmd __P((struct ispsoftc *, mbreg_t *)); 119 120 static void isp_update __P((struct ispsoftc *)); 121 static void isp_setdfltparm __P((struct ispsoftc *)); 122 static int isp_read_nvram __P((struct ispsoftc *)); 123 static void isp_rdnvram_word __P((struct ispsoftc *, int, u_int16_t *)); 124 125 /* 126 * Reset Hardware. 127 * 128 * Hit the chip over the head, download new f/w and set it running. 129 * 130 * Locking done elsewhere. 131 */ 132 void 133 isp_reset(isp) 134 struct ispsoftc *isp; 135 { 136 mbreg_t mbs; 137 int loops, i, dodnld = 1; 138 char *revname; 139 140 isp->isp_state = ISP_NILSTATE; 141 142 /* 143 * Basic types (SCSI, FibreChannel and PCI or SBus) 144 * have been set in the MD code. We figure out more 145 * here. 146 */ 147 isp->isp_dblev = DFLT_DBLEVEL; 148 149 /* 150 * After we've fired this chip up, zero out the conf1 register 151 * for SCSI adapters and other settings for the 2100. 152 */ 153 154 /* 155 * Get the current running firmware revision out of the 156 * chip before we hit it over the head (if this is our 157 * first time through). Note that we store this as the 158 * 'ROM' firmware revision- which it may not be. In any 159 * case, we don't really use this yet, but we may in 160 * the future. 161 */ 162 if (isp->isp_used == 0) { 163 /* 164 * Just in case it was paused... 165 */ 166 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); 167 mbs.param[0] = MBOX_ABOUT_FIRMWARE; 168 isp_mboxcmd(isp, &mbs); 169 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 170 /* 171 * If this fails, it probably means we're running 172 * an old prom, if anything at all... 173 */ 174 isp->isp_romfw_rev = 0; 175 } else { 176 isp->isp_romfw_rev = 177 (((u_int16_t) mbs.param[1]) << 10) + mbs.param[2]; 178 } 179 isp->isp_used = 1; 180 } 181 182 /* 183 * Put it into PAUSE mode. 184 */ 185 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 186 187 if (IS_FC(isp)) { 188 revname = "2100"; 189 } else if (IS_1080(isp)) { 190 u_int16_t l; 191 sdparam *sdp = isp->isp_param; 192 revname = "1080"; 193 sdp->isp_clock = 100; 194 l = ISP_READ(isp, SXP_PINS_DIFF) & ISP1080_MODE_MASK; 195 switch (l) { 196 case ISP1080_LVD_MODE: 197 sdp->isp_lvdmode = 1; 198 PRINTF("%s: LVD Mode\n", isp->isp_name); 199 break; 200 case ISP1080_HVD_MODE: 201 sdp->isp_diffmode = 1; 202 PRINTF("%s: Differential Mode\n", isp->isp_name); 203 break; 204 case ISP1080_SE_MODE: 205 sdp->isp_ultramode = 1; 206 PRINTF("%s: Single-Ended Mode\n", isp->isp_name); 207 break; 208 default: 209 /* 210 * Hmm. Up in a wierd mode. This means all SCSI I/O 211 * buffer lines are tristated, so we're in a lot of 212 * trouble if we don't set things up right. 213 */ 214 PRINTF("%s: Illegal Mode 0x%x\n", isp->isp_name, l); 215 break; 216 } 217 } else { 218 sdparam *sdp = isp->isp_param; 219 i = ISP_READ(isp, BIU_CONF0) & BIU_CONF0_HW_MASK; 220 switch (i) { 221 default: 222 PRINTF("%s: unknown chip rev. 0x%x- assuming a 1020\n", 223 isp->isp_name, i); 224 /* FALLTHROUGH */ 225 case 1: 226 revname = "1020"; 227 isp->isp_type = ISP_HA_SCSI_1020; 228 sdp->isp_clock = 40; 229 break; 230 case 2: 231 /* 232 * Some 1020A chips are Ultra Capable, but don't 233 * run the clock rate up for that unless told to 234 * do so by the Ultra Capable bits being set. 235 */ 236 revname = "1020A"; 237 isp->isp_type = ISP_HA_SCSI_1020A; 238 sdp->isp_clock = 40; 239 break; 240 case 3: 241 revname = "1040"; 242 isp->isp_type = ISP_HA_SCSI_1040; 243 sdp->isp_clock = 60; 244 break; 245 case 4: 246 revname = "1040A"; 247 isp->isp_type = ISP_HA_SCSI_1040A; 248 sdp->isp_clock = 60; 249 break; 250 case 5: 251 revname = "1040B"; 252 isp->isp_type = ISP_HA_SCSI_1040B; 253 sdp->isp_clock = 60; 254 break; 255 } 256 /* 257 * Now, while we're at it, gather info about ultra 258 * and/or differential mode. 259 */ 260 if (ISP_READ(isp, SXP_PINS_DIFF) & SXP_PINS_DIFF_MODE) { 261 PRINTF("%s: Differential Mode\n", isp->isp_name); 262 sdp->isp_diffmode = 1; 263 } else { 264 sdp->isp_diffmode = 0; 265 } 266 i = ISP_READ(isp, RISC_PSR); 267 if (isp->isp_bustype == ISP_BT_SBUS) { 268 i &= RISC_PSR_SBUS_ULTRA; 269 } else { 270 i &= RISC_PSR_PCI_ULTRA; 271 } 272 if (i != 0) { 273 PRINTF("%s: Ultra Mode Capable\n", isp->isp_name); 274 sdp->isp_ultramode = 1; 275 /* 276 * If we're in Ultra Mode, we have to be 60Mhz clock- 277 * even for the SBus version. 278 */ 279 sdp->isp_clock = 60; 280 } else { 281 sdp->isp_ultramode = 0; 282 /* 283 * Clock is known. Gronk. 284 */ 285 } 286 287 /* 288 * Machine dependent clock (if set) overrides 289 * our generic determinations. 290 */ 291 if (isp->isp_mdvec->dv_clock) { 292 if (isp->isp_mdvec->dv_clock < sdp->isp_clock) { 293 sdp->isp_clock = isp->isp_mdvec->dv_clock; 294 } 295 } 296 297 } 298 299 /* 300 * Do MD specific pre initialization 301 */ 302 ISP_RESET0(isp); 303 304 again: 305 306 /* 307 * Hit the chip over the head with hammer, 308 * and give the ISP a chance to recover. 309 */ 310 311 if (IS_SCSI(isp)) { 312 ISP_WRITE(isp, BIU_ICR, BIU_ICR_SOFT_RESET); 313 /* 314 * A slight delay... 315 */ 316 SYS_DELAY(100); 317 318 #if 0 319 PRINTF("%s: mbox0-5: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", 320 isp->isp_name, ISP_READ(isp, OUTMAILBOX0), 321 ISP_READ(isp, OUTMAILBOX1), ISP_READ(isp, OUTMAILBOX2), 322 ISP_READ(isp, OUTMAILBOX3), ISP_READ(isp, OUTMAILBOX4), 323 ISP_READ(isp, OUTMAILBOX5)); 324 #endif 325 326 /* 327 * Clear data && control DMA engines. 328 */ 329 ISP_WRITE(isp, CDMA_CONTROL, 330 DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT); 331 ISP_WRITE(isp, DDMA_CONTROL, 332 DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT); 333 334 335 } else { 336 ISP_WRITE(isp, BIU2100_CSR, BIU2100_SOFT_RESET); 337 /* 338 * A slight delay... 339 */ 340 SYS_DELAY(100); 341 342 /* 343 * Clear data && control DMA engines. 344 */ 345 ISP_WRITE(isp, CDMA2100_CONTROL, 346 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 347 ISP_WRITE(isp, TDMA2100_CONTROL, 348 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 349 ISP_WRITE(isp, RDMA2100_CONTROL, 350 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 351 } 352 353 /* 354 * Wait for ISP to be ready to go... 355 */ 356 loops = MBOX_DELAY_COUNT; 357 for (;;) { 358 if (isp->isp_type & ISP_HA_SCSI) { 359 if (!(ISP_READ(isp, BIU_ICR) & BIU_ICR_SOFT_RESET)) 360 break; 361 } else { 362 if (!(ISP_READ(isp, BIU2100_CSR) & BIU2100_SOFT_RESET)) 363 break; 364 } 365 SYS_DELAY(100); 366 if (--loops < 0) { 367 isp_dumpregs(isp, "chip reset timed out"); 368 return; 369 } 370 } 371 372 /* 373 * After we've fired this chip up, zero out the conf1 register 374 * for SCSI adapters and other settings for the 2100. 375 */ 376 377 if (IS_SCSI(isp)) { 378 ISP_WRITE(isp, BIU_CONF1, 0); 379 } else { 380 ISP_WRITE(isp, BIU2100_CSR, 0); 381 } 382 383 /* 384 * Reset RISC Processor 385 */ 386 ISP_WRITE(isp, HCCR, HCCR_CMD_RESET); 387 SYS_DELAY(100); 388 389 /* 390 * Establish some initial burst rate stuff. 391 * (only for the 1XX0 boards). This really should 392 * be done later after fetching from NVRAM. 393 */ 394 if (IS_SCSI(isp)) { 395 u_int16_t tmp = isp->isp_mdvec->dv_conf1; 396 /* 397 * Busted FIFO. Turn off all but burst enables. 398 */ 399 if (isp->isp_type == ISP_HA_SCSI_1040A) { 400 tmp &= BIU_BURST_ENABLE; 401 } 402 ISP_SETBITS(isp, BIU_CONF1, tmp); 403 if (tmp & BIU_BURST_ENABLE) { 404 ISP_SETBITS(isp, CDMA_CONF, DMA_ENABLE_BURST); 405 ISP_SETBITS(isp, DDMA_CONF, DMA_ENABLE_BURST); 406 } 407 #ifdef PTI_CARDS 408 if (((sdparam *) isp->isp_param)->isp_ultramode) { 409 while (ISP_READ(isp, RISC_MTR) != 0x1313) { 410 ISP_WRITE(isp, RISC_MTR, 0x1313); 411 ISP_WRITE(isp, HCCR, HCCR_CMD_STEP); 412 } 413 } else { 414 ISP_WRITE(isp, RISC_MTR, 0x1212); 415 } 416 /* 417 * PTI specific register 418 */ 419 ISP_WRITE(isp, RISC_EMB, DUAL_BANK) 420 #else 421 ISP_WRITE(isp, RISC_MTR, 0x1212); 422 #endif 423 } else { 424 ISP_WRITE(isp, RISC_MTR2100, 0x1212); 425 } 426 427 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); /* release paused processor */ 428 429 /* 430 * Do MD specific post initialization 431 */ 432 ISP_RESET1(isp); 433 434 /* 435 * Enable interrupts 436 */ 437 ENABLE_INTS(isp); 438 439 /* 440 * Wait for everything to finish firing up... 441 */ 442 loops = MBOX_DELAY_COUNT; 443 while (ISP_READ(isp, OUTMAILBOX0) == MBOX_BUSY) { 444 SYS_DELAY(100); 445 if (--loops < 0) { 446 PRINTF("%s: MBOX_BUSY never cleared on reset\n", 447 isp->isp_name); 448 return; 449 } 450 } 451 452 /* 453 * Up until this point we've done everything by just reading or 454 * setting registers. From this point on we rely on at least *some* 455 * kind of firmware running in the card. 456 */ 457 458 /* 459 * Do some sanity checking. 460 */ 461 mbs.param[0] = MBOX_NO_OP; 462 isp_mboxcmd(isp, &mbs); 463 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 464 isp_dumpregs(isp, "NOP test failed"); 465 return; 466 } 467 468 if (isp->isp_type & ISP_HA_SCSI) { 469 mbs.param[0] = MBOX_MAILBOX_REG_TEST; 470 mbs.param[1] = 0xdead; 471 mbs.param[2] = 0xbeef; 472 mbs.param[3] = 0xffff; 473 mbs.param[4] = 0x1111; 474 mbs.param[5] = 0xa5a5; 475 isp_mboxcmd(isp, &mbs); 476 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 477 isp_dumpregs(isp, 478 "Mailbox Register test didn't complete"); 479 return; 480 } 481 if (mbs.param[1] != 0xdead || mbs.param[2] != 0xbeef || 482 mbs.param[3] != 0xffff || mbs.param[4] != 0x1111 || 483 mbs.param[5] != 0xa5a5) { 484 isp_dumpregs(isp, "Register Test Failed"); 485 return; 486 } 487 488 } 489 490 /* 491 * Download new Firmware, unless requested not to do so. 492 * This is made slightly trickier in some cases where the 493 * firmware of the ROM revision is newer than the revision 494 * compiled into the driver. So, where we used to compare 495 * versions of our f/w and the ROM f/w, now we just see 496 * whether we have f/w at all and whether a config flag 497 * has disabled our download. 498 */ 499 if ((isp->isp_mdvec->dv_fwlen == 0) || 500 (isp->isp_confopts & ISP_CFG_NORELOAD)) { 501 dodnld = 0; 502 } 503 504 if (dodnld && isp->isp_mdvec->dv_fwlen) { 505 for (i = 0; i < isp->isp_mdvec->dv_fwlen; i++) { 506 mbs.param[0] = MBOX_WRITE_RAM_WORD; 507 mbs.param[1] = isp->isp_mdvec->dv_codeorg + i; 508 mbs.param[2] = isp->isp_mdvec->dv_ispfw[i]; 509 isp_mboxcmd(isp, &mbs); 510 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 511 PRINTF("%s: F/W download failed at word %d\n", 512 isp->isp_name, i); 513 dodnld = 0; 514 goto again; 515 } 516 } 517 518 /* 519 * Verify that it downloaded correctly. 520 */ 521 mbs.param[0] = MBOX_VERIFY_CHECKSUM; 522 mbs.param[1] = isp->isp_mdvec->dv_codeorg; 523 isp_mboxcmd(isp, &mbs); 524 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 525 isp_dumpregs(isp, "ram checksum failure"); 526 return; 527 } 528 } else { 529 IDPRINTF(3, ("%s: skipping f/w download\n", isp->isp_name)); 530 } 531 532 /* 533 * Now start it rolling. 534 * 535 * If we didn't actually download f/w, 536 * we still need to (re)start it. 537 */ 538 539 mbs.param[0] = MBOX_EXEC_FIRMWARE; 540 if (isp->isp_mdvec->dv_codeorg) 541 mbs.param[1] = isp->isp_mdvec->dv_codeorg; 542 else 543 mbs.param[1] = 0x1000; 544 isp_mboxcmd(isp, &mbs); 545 546 if (isp->isp_type & ISP_HA_SCSI) { 547 sdparam *sdp = isp->isp_param; 548 /* 549 * Set CLOCK RATE, but only if asked to. 550 */ 551 if (sdp->isp_clock) { 552 mbs.param[0] = MBOX_SET_CLOCK_RATE; 553 mbs.param[1] = sdp->isp_clock; 554 isp_mboxcmd(isp, &mbs); 555 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 556 isp_dumpregs(isp, "failed to set CLOCKRATE"); 557 /* but continue */ 558 } else { 559 IDPRINTF(3, ("%s: setting input clock to %d\n", 560 isp->isp_name, sdp->isp_clock)); 561 } 562 } 563 } 564 mbs.param[0] = MBOX_ABOUT_FIRMWARE; 565 isp_mboxcmd(isp, &mbs); 566 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 567 isp_dumpregs(isp, "ABOUT FIRMWARE command failed"); 568 return; 569 } 570 PRINTF("%s: Board Revision %s, %s F/W Revision %d.%d\n", 571 isp->isp_name, revname, dodnld? "loaded" : "resident", 572 mbs.param[1], mbs.param[2]); 573 if (IS_FC(isp)) { 574 if (ISP_READ(isp, BIU2100_CSR) & BIU2100_PCI64) { 575 PRINTF("%s: in 64-Bit PCI slot\n", isp->isp_name); 576 } 577 } 578 isp->isp_fwrev = (((u_int16_t) mbs.param[1]) << 10) + mbs.param[2]; 579 if (isp->isp_romfw_rev && dodnld) { 580 PRINTF("%s: Last F/W revision was %d.%d\n", isp->isp_name, 581 isp->isp_romfw_rev >> 10, isp->isp_romfw_rev & 0x3ff); 582 } 583 isp_fw_state(isp); 584 isp->isp_state = ISP_RESETSTATE; 585 } 586 587 /* 588 * Initialize Parameters of Hardware to a known state. 589 * 590 * Locks are held before coming here. 591 */ 592 593 void 594 isp_init(isp) 595 struct ispsoftc *isp; 596 { 597 sdparam *sdp; 598 mbreg_t mbs; 599 int tgt; 600 601 /* 602 * Must do first. 603 */ 604 isp_setdfltparm(isp); 605 606 /* 607 * Set up DMA for the request and result mailboxes. 608 */ 609 if (ISP_MBOXDMASETUP(isp) != 0) { 610 PRINTF("%s: can't setup dma mailboxes\n", isp->isp_name); 611 return; 612 } 613 614 /* 615 * If we're fibre, we have a completely different 616 * initialization method. 617 */ 618 if (IS_FC(isp)) { 619 isp_fibre_init(isp); 620 return; 621 } 622 sdp = isp->isp_param; 623 624 /* 625 * If we have fast memory timing enabled, turn it on. 626 */ 627 if (sdp->isp_fast_mttr) { 628 ISP_WRITE(isp, RISC_MTR, 0x1313); 629 } 630 631 /* 632 * Set (possibly new) Initiator ID. 633 */ 634 mbs.param[0] = MBOX_SET_INIT_SCSI_ID; 635 mbs.param[1] = sdp->isp_initiator_id; 636 isp_mboxcmd(isp, &mbs); 637 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 638 isp_dumpregs(isp, "failed to set initiator id"); 639 return; 640 } 641 642 /* 643 * Set Retry Delay and Count 644 */ 645 mbs.param[0] = MBOX_SET_RETRY_COUNT; 646 mbs.param[1] = sdp->isp_retry_count; 647 mbs.param[2] = sdp->isp_retry_delay; 648 isp_mboxcmd(isp, &mbs); 649 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 650 isp_dumpregs(isp, "failed to set retry count and delay"); 651 return; 652 } 653 654 /* 655 * Set ASYNC DATA SETUP time. This is very important. 656 */ 657 mbs.param[0] = MBOX_SET_ASYNC_DATA_SETUP_TIME; 658 mbs.param[1] = sdp->isp_async_data_setup; 659 isp_mboxcmd(isp, &mbs); 660 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 661 isp_dumpregs(isp, "failed to set async data setup time"); 662 return; 663 } 664 665 /* 666 * Set ACTIVE Negation State. 667 */ 668 mbs.param[0] = MBOX_SET_ACTIVE_NEG_STATE; 669 mbs.param[1] = 670 (sdp->isp_req_ack_active_neg << 4) | 671 (sdp->isp_data_line_active_neg << 5); 672 isp_mboxcmd(isp, &mbs); 673 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 674 isp_dumpregs(isp, "failed to set active neg state"); 675 return; 676 } 677 678 /* 679 * Set the Tag Aging limit 680 */ 681 682 mbs.param[0] = MBOX_SET_TAG_AGE_LIMIT; 683 mbs.param[1] = sdp->isp_tag_aging; 684 isp_mboxcmd(isp, &mbs); 685 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 686 isp_dumpregs(isp, "failed to set tag age limit"); 687 return; 688 } 689 690 /* 691 * Set selection timeout. 692 */ 693 694 mbs.param[0] = MBOX_SET_SELECT_TIMEOUT; 695 mbs.param[1] = sdp->isp_selection_timeout; 696 isp_mboxcmd(isp, &mbs); 697 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 698 isp_dumpregs(isp, "failed to set selection timeout"); 699 return; 700 } 701 702 /* 703 * Set current per-target parameters to a safe minimum. 704 */ 705 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 706 int maxlun, lun; 707 u_int16_t sdf; 708 709 if (sdp->isp_devparam[tgt].dev_enable == 0) 710 continue; 711 712 sdf = DPARM_SAFE_DFLT; 713 /* 714 * It is not quite clear when this changed over so that 715 * we could force narrow and async, so assume >= 7.55. 716 */ 717 if (isp->isp_fwrev >= ISP_FW_REV(7, 55)) { 718 sdf |= DPARM_NARROW | DPARM_ASYNC; 719 } 720 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 721 mbs.param[1] = tgt << 8; 722 mbs.param[2] = sdf; 723 mbs.param[3] = 724 (sdp->isp_devparam[tgt].sync_offset << 8) | 725 (sdp->isp_devparam[tgt].sync_period); 726 isp_mboxcmd(isp, &mbs); 727 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 728 sdf = DPARM_SAFE_DFLT; 729 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 730 mbs.param[1] = tgt << 8; 731 mbs.param[2] = sdf; 732 mbs.param[3] = 733 (sdp->isp_devparam[tgt].sync_offset << 8) | 734 (sdp->isp_devparam[tgt].sync_period); 735 isp_mboxcmd(isp, &mbs); 736 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 737 PRINTF("%s: failed even to set defaults for " 738 "target %d\n", isp->isp_name, tgt); 739 continue; 740 } 741 } 742 /* 743 * We don't update dev_flags with what we've set 744 * because that's not the ultimate goal setting. 745 * If we succeed with the command, we *do* update 746 * cur_dflags by getting target parameters. 747 */ 748 mbs.param[0] = MBOX_GET_TARGET_PARAMS; 749 mbs.param[1] = (tgt << 8); 750 isp_mboxcmd(isp, &mbs); 751 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 752 /* 753 * Urrr.... We'll set cur_dflags to DPARM_SAFE_DFLT so 754 * we don't try and do tags if tags aren't enabled. 755 */ 756 sdp->isp_devparam[tgt].cur_dflags = DPARM_SAFE_DFLT; 757 } else { 758 sdp->isp_devparam[tgt].cur_dflags = mbs.param[2]; 759 sdp->isp_devparam[tgt].cur_offset = mbs.param[3] >> 8; 760 sdp->isp_devparam[tgt].cur_period = mbs.param[3] & 0xff; 761 } 762 /* 763 * Ensure that we don't believe tagged queuing is enabled yet. 764 * It turns out that sometimes the ISP just ignores our 765 * attempts to set parameters for devices that it hasn't 766 * seen yet. 767 */ 768 sdp->isp_devparam[tgt].cur_dflags &= ~DPARM_TQING; 769 770 maxlun = (isp->isp_fwrev >= ISP_FW_REV(7, 55))? 32 : 8; 771 for (lun = 0; lun < maxlun; lun++) { 772 mbs.param[0] = MBOX_SET_DEV_QUEUE_PARAMS; 773 mbs.param[1] = (tgt << 8) | lun; 774 mbs.param[2] = sdp->isp_max_queue_depth; 775 mbs.param[3] = sdp->isp_devparam[tgt].exc_throttle; 776 isp_mboxcmd(isp, &mbs); 777 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 778 PRINTF("%s: failed to set device queue " 779 "parameters for target %d, lun %d\n", 780 isp->isp_name, tgt, lun); 781 break; 782 } 783 } 784 /* 785 * And mark this as an unannounced device 786 */ 787 sdp->isp_devparam[tgt].dev_announced = 0; 788 } 789 790 mbs.param[0] = MBOX_INIT_RES_QUEUE; 791 mbs.param[1] = RESULT_QUEUE_LEN; 792 mbs.param[2] = (u_int16_t) (isp->isp_result_dma >> 16); 793 mbs.param[3] = (u_int16_t) (isp->isp_result_dma & 0xffff); 794 mbs.param[4] = 0; 795 mbs.param[5] = 0; 796 isp_mboxcmd(isp, &mbs); 797 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 798 isp_dumpregs(isp, "set of response queue failed"); 799 return; 800 } 801 isp->isp_residx = 0; 802 803 mbs.param[0] = MBOX_INIT_REQ_QUEUE; 804 mbs.param[1] = RQUEST_QUEUE_LEN; 805 mbs.param[2] = (u_int16_t) (isp->isp_rquest_dma >> 16); 806 mbs.param[3] = (u_int16_t) (isp->isp_rquest_dma & 0xffff); 807 mbs.param[4] = 0; 808 mbs.param[5] = 0; 809 isp_mboxcmd(isp, &mbs); 810 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 811 isp_dumpregs(isp, "set of request queue failed"); 812 return; 813 } 814 isp->isp_reqidx = isp->isp_reqodx = 0; 815 816 /* 817 * Turn on Fast Posting, LVD transitions 818 */ 819 820 if (IS_1080(isp) || isp->isp_fwrev >= ISP_FW_REV(7, 55)) { 821 mbs.param[0] = MBOX_SET_FW_FEATURES; 822 #ifndef ISP_NO_FASTPOST_SCSI 823 mbs.param[1] |= FW_FEATURE_FAST_POST; 824 #else 825 mbs.param[1] = 0; 826 #endif 827 if (IS_1080(isp)) 828 mbs.param[1] |= FW_FEATURE_LVD_NOTIFY; 829 if (mbs.param[1] != 0) { 830 isp_mboxcmd(isp, &mbs); 831 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 832 PRINTF("%s: unable enable FW features\n", 833 isp->isp_name); 834 } 835 } 836 } 837 838 /* 839 * Let the outer layers decide whether to issue a SCSI bus reset. 840 */ 841 #if 0 842 /* 843 * XXX: See whether or not for 7.55 F/W or later we 844 * XXX: can do without this, and see whether we should 845 * XXX: honor the NVRAM SCSI_RESET_DISABLE token. 846 */ 847 mbs.param[0] = MBOX_BUS_RESET; 848 mbs.param[1] = 3; 849 isp_mboxcmd(isp, &mbs); 850 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 851 isp_dumpregs(isp, "SCSI bus reset failed"); 852 } 853 /* 854 * This is really important to have set after a bus reset. 855 */ 856 isp->isp_sendmarker = 1; 857 #endif 858 isp->isp_state = ISP_INITSTATE; 859 } 860 861 /* 862 * Fibre Channel specific initialization. 863 * 864 * Locks are held before coming here. 865 */ 866 static void 867 isp_fibre_init(isp) 868 struct ispsoftc *isp; 869 { 870 fcparam *fcp; 871 isp_icb_t *icbp; 872 mbreg_t mbs; 873 int count, loopid; 874 875 fcp = isp->isp_param; 876 877 /* 878 * For systems that don't have BIOS methods for which 879 * we can easily change the NVRAM based loopid, we'll 880 * override that here. Note that when we initialize 881 * the firmware we may get back a different loopid than 882 * we asked for anyway. XXX This is probably not the 883 * best way to figure this out XXX 884 */ 885 #ifndef __i386__ 886 loopid = DEFAULT_LOOPID; 887 #else 888 loopid = fcp->isp_loopid; 889 #endif 890 891 #if defined(ISP2100_FABRIC) && defined(ISP2100_SCCLUN) 892 PRINTF("%s: Fabric Support, Expanded Lun Support\n", isp->isp_name); 893 #endif 894 #if defined(ISP2100_FABRIC) && !defined(ISP2100_SCCLUN) 895 PRINTF("%s: Fabric Support\n", isp->isp_name); 896 #endif 897 #if !defined(ISP2100_FABRIC) && defined(ISP2100_SCCLUN) 898 PRINTF("%s: Expanded Lun Support\n", isp->isp_name); 899 #endif 900 901 icbp = (isp_icb_t *) fcp->isp_scratch; 902 MEMZERO(icbp, sizeof (*icbp)); 903 904 icbp->icb_version = ICB_VERSION1; 905 #ifdef ISP_TARGET_MODE 906 fcp->isp_fwoptions = ICBOPT_TGT_ENABLE|ICBOPT_INI_TGTTYPE; 907 #else 908 fcp->isp_fwoptions = 0; 909 #endif 910 fcp->isp_fwoptions |= ICBOPT_INI_ADISC|ICBOPT_FAIRNESS; 911 fcp->isp_fwoptions |= ICBOPT_PDBCHANGE_AE; 912 fcp->isp_fwoptions |= ICBOPT_HARD_ADDRESS; 913 #ifndef ISP_NO_FASTPOST_FC 914 fcp->isp_fwoptions |= ICBOPT_FAST_POST; 915 #endif 916 #ifdef CHECKME 917 fcp->isp_fwoptions |= ICBOPT_USE_PORTNAME; 918 #endif 919 #ifdef ISP2100_FABRIC 920 fcp->isp_fwoptions |= ICBOPT_FULL_LOGIN; 921 #endif 922 923 icbp->icb_fwoptions = fcp->isp_fwoptions; 924 icbp->icb_maxfrmlen = fcp->isp_maxfrmlen; 925 if (icbp->icb_maxfrmlen < ICB_MIN_FRMLEN || 926 icbp->icb_maxfrmlen > ICB_MAX_FRMLEN) { 927 PRINTF("%s: bad frame length (%d) from NVRAM- using %d\n", 928 isp->isp_name, fcp->isp_maxfrmlen, ICB_DFLT_FRMLEN); 929 } 930 icbp->icb_maxalloc = fcp->isp_maxalloc; 931 icbp->icb_execthrottle = fcp->isp_execthrottle; 932 icbp->icb_retry_delay = fcp->isp_retry_delay; 933 icbp->icb_retry_count = fcp->isp_retry_count; 934 icbp->icb_hardaddr = loopid; 935 936 MAKE_NODE_NAME_FROM_WWN(icbp->icb_nodename, fcp->isp_wwn); 937 if (icbp->icb_fwoptions & ICBOPT_USE_PORTNAME) { 938 u_int64_t portname = fcp->isp_wwn | (2LL << 56); 939 MAKE_NODE_NAME_FROM_WWN(icbp->icb_nodename, portname); 940 } 941 icbp->icb_rqstqlen = RQUEST_QUEUE_LEN; 942 icbp->icb_rsltqlen = RESULT_QUEUE_LEN; 943 icbp->icb_rqstaddr[RQRSP_ADDR0015] = 944 (u_int16_t) (isp->isp_rquest_dma & 0xffff); 945 icbp->icb_rqstaddr[RQRSP_ADDR1631] = 946 (u_int16_t) (isp->isp_rquest_dma >> 16); 947 icbp->icb_respaddr[RQRSP_ADDR0015] = 948 (u_int16_t) (isp->isp_result_dma & 0xffff); 949 icbp->icb_respaddr[RQRSP_ADDR1631] = 950 (u_int16_t) (isp->isp_result_dma >> 16); 951 MemoryBarrier(); 952 953 for (count = 0; count < 10; count++) { 954 mbs.param[0] = MBOX_INIT_FIRMWARE; 955 mbs.param[1] = 0; 956 mbs.param[2] = (u_int16_t) (fcp->isp_scdma >> 16); 957 mbs.param[3] = (u_int16_t) (fcp->isp_scdma & 0xffff); 958 mbs.param[4] = 0; 959 mbs.param[5] = 0; 960 mbs.param[6] = 0; 961 mbs.param[7] = 0; 962 963 isp_mboxcmd(isp, &mbs); 964 965 switch (mbs.param[0]) { 966 case MBOX_COMMAND_COMPLETE: 967 count = 10; 968 break; 969 case ASYNC_PDB_CHANGED: 970 isp_mark_getpdb_all(isp); 971 /* FALL THROUGH */ 972 case ASYNC_LIP_OCCURRED: 973 case ASYNC_LOOP_UP: 974 case ASYNC_LOOP_DOWN: 975 case ASYNC_LOOP_RESET: 976 case ASYNC_CHANGE_NOTIFY: 977 if (count > 9) { 978 PRINTF("%s: too many retries to get going- " 979 "giving up\n", isp->isp_name); 980 return; 981 } 982 break; 983 default: 984 isp_dumpregs(isp, "INIT FIRMWARE failed"); 985 return; 986 } 987 } 988 isp->isp_reqidx = isp->isp_reqodx = 0; 989 isp->isp_residx = 0; 990 isp->isp_sendmarker = 1; 991 992 /* 993 * Whatever happens, we're now committed to being here. 994 */ 995 isp->isp_state = ISP_INITSTATE; 996 fcp->isp_fwstate = FW_CONFIG_WAIT; 997 998 isp_mark_getpdb_all(isp); 999 1000 #ifdef ISP_TARGET_MODE 1001 if (isp_modify_lun(isp, 0, 1, 1)) { 1002 PRINTF("%s: failed to enable target mode\n", isp->isp_name); 1003 } 1004 #endif 1005 } 1006 1007 /* 1008 * Fibre Channel Support- get the port database for the id. 1009 * 1010 * Locks are held before coming here. Return 0 if success, 1011 * else failure. 1012 */ 1013 1014 static void 1015 isp_mark_getpdb_all(isp) 1016 struct ispsoftc *isp; 1017 { 1018 isp_pdb_t *p; 1019 fcparam *fcp = (fcparam *) isp->isp_param; 1020 for (p = &fcp->isp_pdb[0]; p < &fcp->isp_pdb[MAX_FC_TARG]; p++) { 1021 p->pdb_options = INVALID_PDB_OPTIONS; 1022 } 1023 } 1024 1025 static int 1026 isp_getpdb(isp, id, pdbp) 1027 struct ispsoftc *isp; 1028 int id; 1029 isp_pdb_t *pdbp; 1030 { 1031 fcparam *fcp = (fcparam *) isp->isp_param; 1032 mbreg_t mbs; 1033 mbs.param[0] = MBOX_GET_PORT_DB; 1034 mbs.param[1] = id << 8; 1035 mbs.param[2] = (u_int16_t) (fcp->isp_scdma >> 16); 1036 mbs.param[3] = (u_int16_t) (fcp->isp_scdma & 0xffff); 1037 /* 1038 * Unneeded. For the 2100, except for initializing f/w, registers 1039 * 4/5 have to not be written to. 1040 * mbs.param[4] = 0; 1041 * mbs.param[5] = 0; 1042 * 1043 */ 1044 mbs.param[6] = 0; 1045 mbs.param[7] = 0; 1046 isp_mboxcmd(isp, &mbs); 1047 switch (mbs.param[0]) { 1048 case MBOX_COMMAND_COMPLETE: 1049 MemoryBarrier(); 1050 MEMCPY(pdbp, fcp->isp_scratch, sizeof (isp_pdb_t)); 1051 break; 1052 case MBOX_HOST_INTERFACE_ERROR: 1053 PRINTF("%s: DMA error getting port database\n", isp->isp_name); 1054 return (-1); 1055 case MBOX_COMMAND_PARAM_ERROR: 1056 /* Not Logged In */ 1057 IDPRINTF(3, ("%s: Comand Param Error on Get Port Database\n", 1058 isp->isp_name)); 1059 return (-1); 1060 default: 1061 PRINTF("%s: error 0x%x getting port database for ID %d\n", 1062 isp->isp_name, mbs.param[0], id); 1063 return (-1); 1064 } 1065 return (0); 1066 } 1067 1068 /* 1069 * Make sure we have good FC link and know our Loop ID. 1070 */ 1071 1072 static int 1073 isp_fclink_test(isp, waitdelay) 1074 struct ispsoftc *isp; 1075 int waitdelay; 1076 { 1077 mbreg_t mbs; 1078 int count; 1079 u_int8_t lwfs; 1080 fcparam *fcp; 1081 1082 fcp = isp->isp_param; 1083 1084 /* 1085 * Wait up to N microseconds for F/W to go to a ready state. 1086 */ 1087 lwfs = FW_CONFIG_WAIT; 1088 for (count = 0; count < waitdelay; count += 100) { 1089 isp_fw_state(isp); 1090 if (lwfs != fcp->isp_fwstate) { 1091 PRINTF("%s: Firmware State %s -> %s\n", 1092 isp->isp_name, isp2100_fw_statename((int)lwfs), 1093 isp2100_fw_statename((int)fcp->isp_fwstate)); 1094 lwfs = fcp->isp_fwstate; 1095 } 1096 if (fcp->isp_fwstate == FW_READY) { 1097 break; 1098 } 1099 SYS_DELAY(100); /* wait 100 microseconds */ 1100 } 1101 1102 /* 1103 * If we haven't gone to 'ready' state, return. 1104 */ 1105 if (fcp->isp_fwstate != FW_READY) { 1106 return (-1); 1107 } 1108 1109 /* 1110 * Get our Loop ID (if possible). We really need to have it. 1111 */ 1112 mbs.param[0] = MBOX_GET_LOOP_ID; 1113 isp_mboxcmd(isp, &mbs); 1114 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1115 PRINTF("%s: GET LOOP ID failed\n", isp->isp_name); 1116 return (-1); 1117 } 1118 fcp->isp_loopid = mbs.param[1]; 1119 fcp->isp_alpa = mbs.param[2]; 1120 PRINTF("%s: Loop ID %d, ALPA 0x%x\n", isp->isp_name, 1121 fcp->isp_loopid, fcp->isp_alpa); 1122 return (0); 1123 1124 } 1125 1126 /* 1127 * Start a command. Locking is assumed done in the caller. 1128 */ 1129 1130 int32_t 1131 ispscsicmd(xs) 1132 ISP_SCSI_XFER_T *xs; 1133 { 1134 struct ispsoftc *isp; 1135 u_int8_t iptr, optr; 1136 union { 1137 ispreq_t *_reqp; 1138 ispreqt2_t *_t2reqp; 1139 } _u; 1140 #define reqp _u._reqp 1141 #define t2reqp _u._t2reqp 1142 #define UZSIZE max(sizeof (ispreq_t), sizeof (ispreqt2_t)) 1143 int i, rqidx; 1144 1145 XS_INITERR(xs); 1146 isp = XS_ISP(xs); 1147 1148 if (isp->isp_state != ISP_RUNSTATE) { 1149 PRINTF("%s: adapter not ready\n", isp->isp_name); 1150 XS_SETERR(xs, HBA_BOTCH); 1151 return (CMD_COMPLETE); 1152 } 1153 1154 /* 1155 * We *could* do the different sequence type that has close 1156 * to the whole Queue Entry for the command... 1157 */ 1158 1159 if (XS_CDBLEN(xs) > ((isp->isp_type & ISP_HA_FC)? 16 : 12)) { 1160 PRINTF("%s: unsupported cdb length (%d)\n", 1161 isp->isp_name, XS_CDBLEN(xs)); 1162 XS_SETERR(xs, HBA_BOTCH); 1163 return (CMD_COMPLETE); 1164 } 1165 1166 /* 1167 * Check to see whether we have good firmware state still or 1168 * need to refresh our port database for this target. 1169 */ 1170 if (IS_FC(isp)) { 1171 fcparam *fcp = isp->isp_param; 1172 isp_pdb_t *pdbp = &fcp->isp_pdb[XS_TGT(xs)]; 1173 1174 /* 1175 * Check for f/w being in ready state. Well, okay, 1176 * our cached copy of it... 1177 */ 1178 if (fcp->isp_fwstate != FW_READY) { 1179 if (isp_fclink_test(isp, FC_FW_READY_DELAY)) { 1180 XS_SETERR(xs, HBA_SELTIMEOUT); 1181 return (CMD_COMPLETE); 1182 } 1183 } 1184 /* 1185 * Refresh our port database if needed. 1186 */ 1187 if (pdbp->pdb_options == INVALID_PDB_OPTIONS) { 1188 if (isp_getpdb(isp, XS_TGT(xs), pdbp) == 0) { 1189 isp_async(isp, ISPASYNC_PDB_CHANGE_COMPLETE, 1190 (void *) (long) XS_TGT(xs)); 1191 } 1192 } 1193 } 1194 1195 /* 1196 * Next check to see if any HBA or Device 1197 * parameters need to be updated. 1198 */ 1199 if (isp->isp_update) { 1200 isp_update(isp); 1201 } 1202 1203 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 1204 iptr = isp->isp_reqidx; 1205 1206 reqp = (ispreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 1207 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 1208 if (iptr == optr) { 1209 IDPRINTF(2, ("%s: Request Queue Overflow\n", isp->isp_name)); 1210 XS_SETERR(xs, HBA_BOTCH); 1211 return (CMD_EAGAIN); 1212 } 1213 1214 if (isp->isp_sendmarker) { 1215 u_int8_t niptr; 1216 ispmarkreq_t *marker = (ispmarkreq_t *) reqp; 1217 1218 MEMZERO((void *) marker, sizeof (*marker)); 1219 marker->req_header.rqs_entry_count = 1; 1220 marker->req_header.rqs_entry_type = RQSTYPE_MARKER; 1221 marker->req_modifier = SYNC_ALL; 1222 1223 /* 1224 * Unconditionally update the input pointer anyway. 1225 */ 1226 ISP_WRITE(isp, INMAILBOX4, iptr); 1227 isp->isp_reqidx = iptr; 1228 1229 niptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 1230 if (niptr == optr) { 1231 IDPRINTF(2, ("%s: Request Queue Overflow+\n", 1232 isp->isp_name)); 1233 XS_SETERR(xs, HBA_BOTCH); 1234 return (CMD_EAGAIN); 1235 } 1236 reqp = (ispreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 1237 iptr = niptr; 1238 } 1239 1240 MEMZERO((void *) reqp, UZSIZE); 1241 reqp->req_header.rqs_entry_count = 1; 1242 if (isp->isp_type & ISP_HA_FC) { 1243 reqp->req_header.rqs_entry_type = RQSTYPE_T2RQS; 1244 } else { 1245 reqp->req_header.rqs_entry_type = RQSTYPE_REQUEST; 1246 } 1247 reqp->req_header.rqs_flags = 0; 1248 reqp->req_header.rqs_seqno = isp->isp_seqno++; 1249 1250 for (rqidx = 0; rqidx < RQUEST_QUEUE_LEN; rqidx++) { 1251 if (isp->isp_xflist[rqidx] == NULL) 1252 break; 1253 } 1254 if (rqidx == RQUEST_QUEUE_LEN) { 1255 IDPRINTF(2, ("%s: out of xflist pointers\n", isp->isp_name)); 1256 XS_SETERR(xs, HBA_BOTCH); 1257 return (CMD_EAGAIN); 1258 } else { 1259 /* 1260 * Never have a handle that is zero, so 1261 * set req_handle off by one. 1262 */ 1263 isp->isp_xflist[rqidx] = xs; 1264 reqp->req_handle = rqidx+1; 1265 } 1266 1267 if (isp->isp_type & ISP_HA_FC) { 1268 /* 1269 * See comment in isp_intr 1270 */ 1271 XS_RESID(xs) = 0; 1272 1273 /* 1274 * Fibre Channel always requires some kind of tag. 1275 * If we're marked as "Can't Tag", just do simple 1276 * instead of ordered tags. It's pretty clear to me 1277 * that we shouldn't do head of queue tagging in 1278 * this case. 1279 */ 1280 if (XS_CANTAG(xs)) { 1281 t2reqp->req_flags = XS_KINDOF_TAG(xs); 1282 } else { 1283 t2reqp->req_flags = REQFLAG_STAG; 1284 } 1285 } else { 1286 sdparam *sdp = (sdparam *)isp->isp_param; 1287 if ((sdp->isp_devparam[XS_TGT(xs)].cur_dflags & DPARM_TQING) && 1288 XS_CANTAG(xs)) { 1289 reqp->req_flags = XS_KINDOF_TAG(xs); 1290 } else { 1291 reqp->req_flags = 0; 1292 } 1293 } 1294 reqp->req_target = XS_TGT(xs); 1295 if (isp->isp_type & ISP_HA_SCSI) { 1296 reqp->req_lun_trn = XS_LUN(xs); 1297 reqp->req_cdblen = XS_CDBLEN(xs); 1298 } else { 1299 #ifdef ISP2100_SCCLUN 1300 reqp->req_scclun = XS_LUN(xs); 1301 #else 1302 reqp->req_lun_trn = XS_LUN(xs); 1303 #endif 1304 1305 } 1306 MEMCPY(reqp->req_cdb, XS_CDBP(xs), XS_CDBLEN(xs)); 1307 1308 IDPRINTF(5, ("%s(%d.%d): START%d cmd 0x%x datalen %d\n", isp->isp_name, 1309 XS_TGT(xs), XS_LUN(xs), reqp->req_header.rqs_seqno, 1310 reqp->req_cdb[0], XS_XFRLEN(xs))); 1311 1312 reqp->req_time = XS_TIME(xs) / 1000; 1313 if (reqp->req_time == 0 && XS_TIME(xs)) 1314 reqp->req_time = 1; 1315 1316 /* 1317 * Always give a bit more leeway to commands after a bus reset. 1318 */ 1319 if (isp->isp_sendmarker && reqp->req_time < 5) 1320 reqp->req_time = 5; 1321 1322 i = ISP_DMASETUP(isp, xs, reqp, &iptr, optr); 1323 if (i != CMD_QUEUED) { 1324 /* 1325 * Take memory of it away... 1326 */ 1327 isp->isp_xflist[rqidx] = NULL; 1328 /* 1329 * dmasetup sets actual error in packet, and 1330 * return what we were given to return. 1331 */ 1332 return (i); 1333 } 1334 XS_SETERR(xs, HBA_NOERROR); 1335 MemoryBarrier(); 1336 ISP_WRITE(isp, INMAILBOX4, iptr); 1337 isp->isp_reqidx = iptr; 1338 isp->isp_nactive++; 1339 if (isp->isp_sendmarker) 1340 isp->isp_sendmarker = 0; 1341 return (CMD_QUEUED); 1342 #undef reqp 1343 #undef t2reqp 1344 } 1345 1346 /* 1347 * isp control 1348 * Locks (ints blocked) assumed held. 1349 */ 1350 1351 int 1352 isp_control(isp, ctl, arg) 1353 struct ispsoftc *isp; 1354 ispctl_t ctl; 1355 void *arg; 1356 { 1357 ISP_SCSI_XFER_T *xs; 1358 mbreg_t mbs; 1359 int i; 1360 1361 switch (ctl) { 1362 default: 1363 PRINTF("%s: isp_control unknown control op %x\n", 1364 isp->isp_name, ctl); 1365 break; 1366 1367 case ISPCTL_RESET_BUS: 1368 /* 1369 * This is really important to have set after a bus reset. 1370 */ 1371 isp->isp_sendmarker = 1; 1372 1373 /* 1374 * Issue a bus reset. 1375 */ 1376 mbs.param[0] = MBOX_BUS_RESET; 1377 if (isp->isp_type & ISP_HA_SCSI) { 1378 mbs.param[1] = 1379 ((sdparam *) isp->isp_param)->isp_bus_reset_delay; 1380 if (mbs.param[1] < 2) 1381 mbs.param[1] = 2; 1382 } else { 1383 /* 1384 * Unparameterized. 1385 */ 1386 mbs.param[1] = 5; 1387 } 1388 isp_mboxcmd(isp, &mbs); 1389 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1390 isp_dumpregs(isp, "isp_control SCSI bus reset failed"); 1391 break; 1392 } 1393 PRINTF("%s: driver initiated bus reset\n", isp->isp_name); 1394 return (0); 1395 1396 case ISPCTL_RESET_DEV: 1397 mbs.param[0] = MBOX_ABORT_TARGET; 1398 mbs.param[1] = ((long)arg) << 8; 1399 mbs.param[2] = 3; /* 'delay', in seconds */ 1400 isp_mboxcmd(isp, &mbs); 1401 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1402 isp_dumpregs(isp, "Target Reset Failed"); 1403 break; 1404 } 1405 PRINTF("%s: Target %d Reset Succeeded\n", isp->isp_name, 1406 (int) ((long) arg)); 1407 isp->isp_sendmarker = 1; 1408 return (0); 1409 1410 case ISPCTL_ABORT_CMD: 1411 xs = (ISP_SCSI_XFER_T *) arg; 1412 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 1413 if (xs == isp->isp_xflist[i]) { 1414 break; 1415 } 1416 } 1417 if (i == RQUEST_QUEUE_LEN) { 1418 PRINTF("%s: isp_control- cannot find command to abort " 1419 "in active list\n", isp->isp_name); 1420 break; 1421 } 1422 mbs.param[0] = MBOX_ABORT; 1423 #ifdef ISP2100_SCCLUN 1424 if (isp->isp_type & ISP_HA_FC) { 1425 mbs.param[1] = XS_TGT(xs) << 8; 1426 mbs.param[4] = 0; 1427 mbs.param[5] = 0; 1428 mbs.param[6] = XS_LUN(xs); 1429 } else { 1430 mbs.param[1] = XS_TGT(xs) << 8 | XS_LUN(xs); 1431 } 1432 #else 1433 mbs.param[1] = XS_TGT(xs) << 8 | XS_LUN(xs); 1434 #endif 1435 mbs.param[2] = (i+1) >> 16; 1436 mbs.param[3] = (i+1) & 0xffff; 1437 isp_mboxcmd(isp, &mbs); 1438 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1439 PRINTF("%s: isp_control MBOX_ABORT failure (code %x)\n", 1440 isp->isp_name, mbs.param[0]); 1441 break; 1442 } 1443 PRINTF("%s: command for target %d lun %d was aborted\n", 1444 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 1445 return (0); 1446 1447 case ISPCTL_UPDATE_PARAMS: 1448 isp_update(isp); 1449 return (0); 1450 1451 case ISPCTL_FCLINK_TEST: 1452 return (isp_fclink_test(isp, FC_FW_READY_DELAY)); 1453 } 1454 return (-1); 1455 } 1456 1457 /* 1458 * Interrupt Service Routine(s). 1459 * 1460 * External (OS) framework has done the appropriate locking, 1461 * and the locking will be held throughout this function. 1462 */ 1463 1464 int 1465 isp_intr(arg) 1466 void *arg; 1467 { 1468 ISP_SCSI_XFER_T *complist[RESULT_QUEUE_LEN], *xs; 1469 struct ispsoftc *isp = arg; 1470 u_int8_t iptr, optr; 1471 u_int16_t isr; 1472 int i, nlooked = 0, ndone = 0; 1473 1474 isr = ISP_READ(isp, BIU_ISR); 1475 if (isp->isp_type & ISP_HA_FC) { 1476 if (isr == 0 || (isr & BIU2100_ISR_RISC_INT) == 0) { 1477 if (isr) { 1478 IDPRINTF(4, ("%s: isp_intr isr=%x\n", 1479 isp->isp_name, isr)); 1480 } 1481 return (0); 1482 } 1483 } else { 1484 if (isr == 0 || (isr & BIU_ISR_RISC_INT) == 0) { 1485 if (isr) { 1486 IDPRINTF(4, ("%s: isp_intr isr=%x\n", 1487 isp->isp_name, isr)); 1488 } 1489 return (0); 1490 } 1491 } 1492 1493 if (ISP_READ(isp, BIU_SEMA) & 1) { 1494 u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0); 1495 if (mbox & 0x4000) { 1496 IDPRINTF(3, ("%s: isp_intr sees 0x%x\n", 1497 isp->isp_name, mbox)); 1498 ISP_WRITE(isp, BIU_SEMA, 0); 1499 } else { 1500 u_int32_t fhandle = isp_parse_async(isp, (int) mbox); 1501 ISP_WRITE(isp, BIU_SEMA, 0); 1502 if (fhandle < 0) { 1503 return (1); 1504 } else if (fhandle > 0) { 1505 xs = (void *)isp->isp_xflist[fhandle - 1]; 1506 isp->isp_xflist[fhandle - 1] = NULL; 1507 /* 1508 * Since we don't have a result queue entry 1509 * item, we must believe that SCSI status is 1510 * zero and that all data transferred. 1511 */ 1512 XS_RESID(xs) = 0; 1513 XS_STS(xs) = 0; 1514 if (XS_XFRLEN(xs)) { 1515 ISP_DMAFREE(isp, xs, fhandle - 1); 1516 } 1517 if (isp->isp_nactive > 0) 1518 isp->isp_nactive--; 1519 complist[ndone++] = xs; 1520 } 1521 } 1522 } 1523 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 1524 1525 optr = isp->isp_residx; 1526 iptr = ISP_READ(isp, OUTMAILBOX5); 1527 1528 if (optr == iptr) { 1529 IDPRINTF(4, ("why intr? isr %x iptr %x optr %x\n", 1530 isr, optr, iptr)); 1531 } 1532 ENABLE_INTS(isp); 1533 1534 while (optr != iptr) { 1535 ispstatusreq_t *sp; 1536 u_int8_t oop; 1537 int buddaboom = 0; 1538 1539 sp = (ispstatusreq_t *) ISP_QUEUE_ENTRY(isp->isp_result, optr); 1540 oop = optr; 1541 optr = ISP_NXT_QENTRY(optr, RESULT_QUEUE_LEN); 1542 nlooked++; 1543 MemoryBarrier(); 1544 if (sp->req_header.rqs_entry_type != RQSTYPE_RESPONSE) { 1545 if (isp_handle_other_response(isp, sp, &optr) == 0) { 1546 ISP_WRITE(isp, INMAILBOX5, optr); 1547 continue; 1548 } 1549 /* 1550 * It really has to be a bounced request just copied 1551 * from the request queue to the response queue. 1552 */ 1553 1554 if (sp->req_header.rqs_entry_type != RQSTYPE_REQUEST) { 1555 ISP_WRITE(isp, INMAILBOX5, optr); 1556 continue; 1557 } 1558 PRINTF("%s: not RESPONSE in RESPONSE Queue " 1559 "(type 0x%x) @ idx %d (next %d)\n", isp->isp_name, 1560 sp->req_header.rqs_entry_type, oop, optr); 1561 buddaboom = 1; 1562 } 1563 1564 if (sp->req_header.rqs_flags & 0xf) { 1565 if (sp->req_header.rqs_flags & RQSFLAG_CONTINUATION) { 1566 ISP_WRITE(isp, INMAILBOX5, optr); 1567 continue; 1568 } 1569 PRINTF("%s: rqs_flags=%x", isp->isp_name, 1570 sp->req_header.rqs_flags & 0xf); 1571 if (sp->req_header.rqs_flags & RQSFLAG_FULL) { 1572 PRINTF("%s: internal queues full\n", 1573 isp->isp_name); 1574 /* XXXX: this command *could* get restarted */ 1575 buddaboom++; 1576 } 1577 if (sp->req_header.rqs_flags & RQSFLAG_BADHEADER) { 1578 PRINTF("%s: bad header\n", isp->isp_name); 1579 buddaboom++; 1580 } 1581 if (sp->req_header.rqs_flags & RQSFLAG_BADPACKET) { 1582 PRINTF("%s: bad request packet\n", 1583 isp->isp_name); 1584 buddaboom++; 1585 } 1586 } 1587 if (sp->req_handle > RQUEST_QUEUE_LEN || sp->req_handle < 1) { 1588 PRINTF("%s: bad request handle %d\n", isp->isp_name, 1589 sp->req_handle); 1590 ISP_WRITE(isp, INMAILBOX5, optr); 1591 continue; 1592 } 1593 xs = (void *) isp->isp_xflist[sp->req_handle - 1]; 1594 if (xs == NULL) { 1595 PRINTF("%s: NULL xs in xflist (handle %x)\n", 1596 isp->isp_name, sp->req_handle); 1597 isp_dumpxflist(isp); 1598 ISP_WRITE(isp, INMAILBOX5, optr); 1599 continue; 1600 } 1601 isp->isp_xflist[sp->req_handle - 1] = NULL; 1602 if (sp->req_status_flags & RQSTF_BUS_RESET) { 1603 isp->isp_sendmarker = 1; 1604 } 1605 if (buddaboom) { 1606 XS_SETERR(xs, HBA_BOTCH); 1607 } 1608 XS_STS(xs) = sp->req_scsi_status & 0xff; 1609 if (isp->isp_type & ISP_HA_SCSI) { 1610 if (sp->req_state_flags & RQSF_GOT_SENSE) { 1611 MEMCPY(XS_SNSP(xs), sp->req_sense_data, 1612 XS_SNSLEN(xs)); 1613 XS_SNS_IS_VALID(xs); 1614 } 1615 /* 1616 * A new synchronous rate was negotiated for this 1617 * target. Mark state such that we'll go look up 1618 * that which has changed later. 1619 */ 1620 if (sp->req_status_flags & RQSTF_NEGOTIATION) { 1621 sdparam *sdp = isp->isp_param; 1622 isp->isp_update = 1; 1623 sdp->isp_devparam[XS_TGT(xs)].dev_refresh = 1; 1624 } 1625 } else { 1626 if (XS_STS(xs) == SCSI_CHECK) { 1627 XS_SNS_IS_VALID(xs); 1628 MEMCPY(XS_SNSP(xs), sp->req_sense_data, 1629 XS_SNSLEN(xs)); 1630 sp->req_state_flags |= RQSF_GOT_SENSE; 1631 } 1632 } 1633 if (XS_NOERR(xs) && XS_STS(xs) == SCSI_BUSY) { 1634 XS_SETERR(xs, HBA_TGTBSY); 1635 } 1636 1637 if (sp->req_header.rqs_entry_type == RQSTYPE_RESPONSE) { 1638 if (XS_NOERR(xs)) { 1639 if (sp->req_completion_status != RQCS_COMPLETE) { 1640 isp_parse_status(isp, sp, xs); 1641 } else { 1642 XS_SETERR(xs, HBA_NOERROR); 1643 } 1644 } 1645 } else { 1646 PRINTF("%s: unknown return %x\n", isp->isp_name, 1647 sp->req_header.rqs_entry_type); 1648 if (XS_NOERR(xs)) { 1649 XS_SETERR(xs, HBA_BOTCH); 1650 } 1651 } 1652 if (isp->isp_type & ISP_HA_SCSI) { 1653 XS_RESID(xs) = sp->req_resid; 1654 } else if (sp->req_scsi_status & RQCS_RU) { 1655 XS_RESID(xs) = sp->req_resid; 1656 IDPRINTF(4, ("%s: cnt %d rsd %d\n", isp->isp_name, 1657 XS_XFRLEN(xs), sp->req_resid)); 1658 } 1659 if (XS_XFRLEN(xs)) { 1660 ISP_DMAFREE(isp, xs, sp->req_handle - 1); 1661 } 1662 /* 1663 * XXX: If we have a check condition, but no Sense Data, 1664 * XXX: mark it as an error (ARQ failed). We need to 1665 * XXX: to do a more distinct job because there may 1666 * XXX: cases where ARQ is disabled. 1667 */ 1668 if (XS_STS(xs) == SCSI_CHECK && !(XS_IS_SNS_VALID(xs))) { 1669 if (XS_NOERR(xs)) { 1670 PRINTF("%s: ARQ failure for target %d lun %d\n", 1671 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 1672 XS_SETERR(xs, HBA_ARQFAIL); 1673 } 1674 } 1675 if ((isp->isp_dblev >= 5) || 1676 (isp->isp_dblev > 2 && !XS_NOERR(xs))) { 1677 PRINTF("%s(%d.%d): FIN%d dl%d resid%d STS %x", 1678 isp->isp_name, XS_TGT(xs), XS_LUN(xs), 1679 sp->req_header.rqs_seqno, XS_XFRLEN(xs), 1680 XS_RESID(xs), XS_STS(xs)); 1681 if (sp->req_state_flags & RQSF_GOT_SENSE) { 1682 PRINTF(" Skey: %x", XS_SNSKEY(xs)); 1683 if (!(XS_IS_SNS_VALID(xs))) { 1684 PRINTF(" BUT NOT SET"); 1685 } 1686 } 1687 PRINTF(" XS_ERR=0x%x\n", (unsigned int) XS_ERR(xs)); 1688 } 1689 1690 if (isp->isp_nactive > 0) 1691 isp->isp_nactive--; 1692 complist[ndone++] = xs; /* defer completion call until later */ 1693 } 1694 1695 /* 1696 * If we looked at any commands, then it's valid to find out 1697 * what the outpointer is. It also is a trigger to update the 1698 * ISP's notion of what we've seen so far. 1699 */ 1700 if (nlooked) { 1701 ISP_WRITE(isp, INMAILBOX5, optr); 1702 isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 1703 } 1704 isp->isp_residx = optr; 1705 for (i = 0; i < ndone; i++) { 1706 xs = complist[i]; 1707 if (xs) { 1708 XS_CMD_DONE(xs); 1709 } 1710 } 1711 return (1); 1712 } 1713 1714 /* 1715 * Support routines. 1716 */ 1717 1718 static int 1719 isp_parse_async(isp, mbox) 1720 struct ispsoftc *isp; 1721 int mbox; 1722 { 1723 u_int32_t fast_post_handle = 0; 1724 1725 switch (mbox) { 1726 case MBOX_COMMAND_COMPLETE: /* sometimes these show up */ 1727 break; 1728 case ASYNC_BUS_RESET: 1729 isp_async(isp, ISPASYNC_BUS_RESET, NULL); 1730 isp->isp_sendmarker = 1; 1731 #ifdef ISP_TARGET_MODE 1732 isp_notify_ack(isp, NULL); 1733 #endif 1734 break; 1735 1736 case ASYNC_SYSTEM_ERROR: 1737 mbox = ISP_READ(isp, OUTMAILBOX1); 1738 PRINTF("%s: Internal FW Error @ RISC Addr 0x%x\n", 1739 isp->isp_name, mbox); 1740 isp_restart(isp); 1741 /* no point continuing after this */ 1742 return (-1); 1743 1744 case ASYNC_RQS_XFER_ERR: 1745 PRINTF("%s: Request Queue Transfer Error\n", isp->isp_name); 1746 break; 1747 1748 case ASYNC_RSP_XFER_ERR: 1749 PRINTF("%s: Response Queue Transfer Error\n", isp->isp_name); 1750 break; 1751 1752 case ASYNC_QWAKEUP: 1753 /* don't need to be chatty */ 1754 mbox = ISP_READ(isp, OUTMAILBOX4); 1755 break; 1756 1757 case ASYNC_TIMEOUT_RESET: 1758 PRINTF("%s: timeout initiated SCSI bus reset\n", isp->isp_name); 1759 isp->isp_sendmarker = 1; 1760 #ifdef ISP_TARGET_MODE 1761 isp_notify_ack(isp, NULL); 1762 #endif 1763 break; 1764 1765 case ASYNC_DEVICE_RESET: 1766 isp->isp_sendmarker = 1; 1767 PRINTF("%s: device reset\n", isp->isp_name); 1768 #ifdef ISP_TARGET_MODE 1769 isp_notify_ack(isp, NULL); 1770 #endif 1771 break; 1772 1773 case ASYNC_EXTMSG_UNDERRUN: 1774 PRINTF("%s: extended message underrun\n", isp->isp_name); 1775 break; 1776 1777 case ASYNC_SCAM_INT: 1778 PRINTF("%s: SCAM interrupt\n", isp->isp_name); 1779 break; 1780 1781 case ASYNC_HUNG_SCSI: 1782 PRINTF("%s: stalled SCSI Bus after DATA Overrun\n", 1783 isp->isp_name); 1784 /* XXX: Need to issue SCSI reset at this point */ 1785 break; 1786 1787 case ASYNC_KILLED_BUS: 1788 PRINTF("%s: SCSI Bus reset after DATA Overrun\n", 1789 isp->isp_name); 1790 break; 1791 1792 case ASYNC_BUS_TRANSIT: 1793 mbox = ISP_READ(isp, OUTMAILBOX2); 1794 switch (mbox & 0x1c00) { 1795 case SXP_PINS_LVD_MODE: 1796 PRINTF("%s: Transition to LVD mode\n", isp->isp_name); 1797 ((sdparam *)isp->isp_param)->isp_diffmode = 0; 1798 ((sdparam *)isp->isp_param)->isp_ultramode = 0; 1799 ((sdparam *)isp->isp_param)->isp_lvdmode = 1; 1800 break; 1801 case SXP_PINS_HVD_MODE: 1802 PRINTF("%s: Transition to Differential mode\n", 1803 isp->isp_name); 1804 ((sdparam *)isp->isp_param)->isp_diffmode = 1; 1805 ((sdparam *)isp->isp_param)->isp_ultramode = 0; 1806 ((sdparam *)isp->isp_param)->isp_lvdmode = 0; 1807 break; 1808 case SXP_PINS_SE_MODE: 1809 PRINTF("%s: Transition to Single Ended mode\n", 1810 isp->isp_name); 1811 ((sdparam *)isp->isp_param)->isp_diffmode = 0; 1812 ((sdparam *)isp->isp_param)->isp_ultramode = 1; 1813 ((sdparam *)isp->isp_param)->isp_lvdmode = 0; 1814 break; 1815 default: 1816 PRINTF("%s: Transition to unknown mode 0x%x\n", 1817 isp->isp_name, mbox); 1818 break; 1819 } 1820 /* 1821 * XXX: Set up to renegotiate again! 1822 */ 1823 isp->isp_sendmarker = 1; 1824 break; 1825 1826 case ASYNC_CMD_CMPLT: 1827 fast_post_handle = (ISP_READ(isp, OUTMAILBOX2) << 16) | 1828 ISP_READ(isp, OUTMAILBOX1); 1829 IDPRINTF(3, ("%s: fast post completion of %u\n", isp->isp_name, 1830 fast_post_handle)); 1831 break; 1832 1833 case ASYNC_CTIO_DONE: 1834 /* Should only occur when Fast Posting Set for 2100s */ 1835 PRINTF("%s: CTIO done\n", isp->isp_name); 1836 break; 1837 1838 case ASYNC_LIP_OCCURRED: 1839 isp->isp_sendmarker = 1; 1840 PRINTF("%s: LIP occurred\n", isp->isp_name); 1841 break; 1842 1843 case ASYNC_LOOP_UP: 1844 isp->isp_sendmarker = 1; 1845 isp_async(isp, ISPASYNC_LOOP_UP, NULL); 1846 break; 1847 1848 case ASYNC_LOOP_DOWN: 1849 isp_async(isp, ISPASYNC_LOOP_DOWN, NULL); 1850 break; 1851 1852 case ASYNC_LOOP_RESET: 1853 isp->isp_sendmarker = 1; 1854 PRINTF("%s: Loop RESET\n", isp->isp_name); 1855 #ifdef ISP_TARGET_MODE 1856 isp_notify_ack(isp, NULL); 1857 #endif 1858 break; 1859 1860 case ASYNC_PDB_CHANGED: 1861 isp->isp_sendmarker = 1; 1862 isp_mark_getpdb_all(isp); 1863 PRINTF("%s: Port Database Changed\n", isp->isp_name); 1864 break; 1865 1866 case ASYNC_CHANGE_NOTIFY: 1867 break; 1868 1869 default: 1870 PRINTF("%s: unknown async code 0x%x\n", isp->isp_name, mbox); 1871 break; 1872 } 1873 return (fast_post_handle); 1874 } 1875 1876 static int 1877 isp_handle_other_response(isp, sp, optrp) 1878 struct ispsoftc *isp; 1879 ispstatusreq_t *sp; 1880 u_int8_t *optrp; 1881 { 1882 u_int8_t iptr, optr; 1883 int reqsize = 0; 1884 void *ireqp = NULL; 1885 #ifdef ISP_TARGET_MODE 1886 union { 1887 at_entry_t *atio; 1888 at2_entry_t *at2io; 1889 ct_entry_t *ctio; 1890 ct2_entry_t *ct2io; 1891 lun_entry_t *lunen; 1892 in_entry_t *inot; 1893 in_fcentry_t *inot_fc; 1894 na_entry_t *nack; 1895 na_fcentry_t *nack_fc; 1896 void *voidp; 1897 #define atio un.atio 1898 #define at2io un.at2io 1899 #define ctio un.ctio 1900 #define ct2io un.ct2io 1901 #define lunen un.lunen 1902 #define inot un.inot 1903 #define inot_fc un.inot_fc 1904 #define nack un.nack 1905 #define nack_fc un.nack_fc 1906 } un; 1907 1908 un.voidp = sp; 1909 #endif 1910 1911 1912 switch (sp->req_header.rqs_entry_type) { 1913 case RQSTYPE_REQUEST: 1914 return (-1); 1915 #ifdef ISP_TARGET_MODE 1916 case RQSTYPE_NOTIFY_ACK: 1917 { 1918 static const char *f = 1919 "%s: Notify Ack Status 0x%x Sequence Id 0x%x\n" 1920 /* 1921 * The ISP is acknowleding our ack of an Immediate Notify. 1922 */ 1923 if (isp->isp_type & ISP_HA_FC) { 1924 PRINTF(f, isp->isp_name, 1925 nack_fc->na-status, nack_fc->na_seqid); 1926 } else { 1927 PRINTF(f, isp->isp_name, 1928 nack->na_status, nack->na_seqid); 1929 } 1930 break; 1931 } 1932 case RQSTYPE_NOTIFY: 1933 { 1934 u_int16_t seqid, status; 1935 1936 /* 1937 * Either the ISP received a SCSI message it cannot handle 1938 * or some other out of band condition (e.g., Port Logout) 1939 * or it is returning an Immediate Notify entry we sent. 1940 */ 1941 if (isp->isp_type & ISP_HA_FC) { 1942 status = inot_fc->status; 1943 seqid = inot_fc->in_seqid; 1944 } else { 1945 status = inot->status; 1946 seqid = inot->seqid & 0xff; 1947 } 1948 PRINTF("%s: Immediate Notify Status 0x%x Sequence Id 0x%x\n", 1949 isp->isp_name, status, seqid); 1950 1951 switch (status) { 1952 case IN_MSG_RECEIVED: 1953 case IN_IDE_RECEIVED: 1954 ptisp_got_msg(ptp, &inot); 1955 break; 1956 case IN_RSRC_UNAVAIL: 1957 PRINTF("%s: Firmware out of ATIOs\n", isp->isp_name); 1958 break; 1959 case IN_ABORT_TASK: 1960 PRINTF("%s: Abort Task iid %d rx_id 0x%x\n", 1961 inot_fc->in_iid, seqid); 1962 break; 1963 case IN_PORT_LOGOUT: 1964 PRINTF("%s: Port Logout for Initiator %d\n", 1965 isp->isp_name, inot_fc->in_iid); 1966 break; 1967 default: 1968 PRINTF("%s: bad status (0x%x) in Immediate Notify\n", 1969 isp->isp_name, status); 1970 break; 1971 1972 } 1973 isp_notify_ack(isp, un.voidp); 1974 reqsize = 0; 1975 break; 1976 } 1977 case RQSTYPE_ENABLE_LUN: 1978 case RQSTYPE_MODIFY_LUN: 1979 if (lunen->req_status != 1) { 1980 PRINTF("%s: ENABLE/MODIFY LUN returned status 0x%x\n", 1981 isp->isp_name, lunen->req_status); 1982 } 1983 break; 1984 case RQSTYPE_ATIO2: 1985 { 1986 fcparam *fcp = isp->isp_param; 1987 ispctiot2_t local, *ct2 = NULL; 1988 ispatiot2_t *at2 = (ispatiot2_t *) sp; 1989 int s, lun; 1990 1991 #ifdef ISP2100_SCCLUN 1992 lun = at2->req_scclun; 1993 #else 1994 lun = at2->req_lun; 1995 #endif 1996 PRINTF("%s: atio2 loopid %d for lun %d rxid 0x%x flags0x%x " 1997 "tflags0x%x ecodes0x%x rqstatus0x%x\n", isp->isp_name, 1998 at2->req_initiator, lun, at2->req_rxid, 1999 at2->req_flags, at2->req_taskflags, at2->req_execodes, 2000 at2->req_status); 2001 2002 switch (at2->req_status & ~ATIO_SENSEVALID) { 2003 case ATIO_PATH_INVALID: 2004 PRINTF("%s: ATIO2 Path Invalid\n", isp->isp_name); 2005 break; 2006 case ATIO_NOCAP: 2007 PRINTF("%s: ATIO2 No Cap\n", isp->isp_name); 2008 break; 2009 case ATIO_BDR_MSG: 2010 PRINTF("%s: ATIO2 BDR Received\n", isp->isp_name); 2011 break; 2012 case ATIO_CDB_RECEIVED: 2013 ct2 = &local; 2014 break; 2015 default: 2016 PRINTF("%s: unknown req_status 0x%x\n", isp->isp_name, 2017 at2->req_status); 2018 break; 2019 } 2020 if (ct2 == NULL) { 2021 /* 2022 * Just do an ACCEPT on this fellow. 2023 */ 2024 at2->req_header.rqs_entry_type = RQSTYPE_ATIO2; 2025 at2->req_header.rqs_flags = 0; 2026 at2->req_flags = 1; 2027 ireqp = at2; 2028 reqsize = sizeof (*at2); 2029 break; 2030 } 2031 PRINTF("%s: datalen %d cdb0=0x%x\n", isp->isp_name, 2032 at2->req_datalen, at2->req_cdb[0]); 2033 MEMZERO((void *) ct2, sizeof (*ct2)); 2034 ct2->req_header.rqs_entry_type = RQSTYPE_CTIO2; 2035 ct2->req_header.rqs_entry_count = 1; 2036 ct2->req_header.rqs_flags = 0; 2037 ct2->req_header.rqs_seqno = isp->isp_seqno++; 2038 ct2->req_handle = (at2->req_initiator << 16) | lun; 2039 #ifndef ISP2100_SCCLUN 2040 ct2->req_lun = lun; 2041 #endif 2042 ct2->req_initiator = at2->req_initiator; 2043 ct2->req_rxid = at2->req_rxid; 2044 2045 ct2->req_flags = CTIO_SEND_STATUS; 2046 switch (at2->req_cdb[0]) { 2047 case 0x0: /* TUR */ 2048 ct2->req_flags |= CTIO_NODATA | CTIO2_SMODE0; 2049 ct2->req_m.mode0.req_scsi_status = CTIO2_STATUS_VALID; 2050 break; 2051 2052 case 0x3: /* REQUEST SENSE */ 2053 case 0x12: /* INQUIRE */ 2054 ct2->req_flags |= CTIO_SEND_DATA | CTIO2_SMODE0; 2055 ct2->req_m.mode0.req_scsi_status = CTIO2_STATUS_VALID; 2056 ct2->req_seg_count = 1; 2057 if (at2->req_cdb[0] == 0x12) { 2058 s = sizeof (tgtiqd); 2059 MEMCPY(fcp->isp_scratch, tgtiqd, s); 2060 } else { 2061 s = at2->req_datalen; 2062 MEMZERO(fcp->isp_scratch, s); 2063 } 2064 ct2->req_m.mode0.req_dataseg[0].ds_base = 2065 fcp->isp_scdma; 2066 ct2->req_m.mode0.req_dataseg[0].ds_count = s; 2067 ct2->req_m.mode0.req_datalen = s; 2068 #if 1 2069 if (at2->req_datalen < s) { 2070 ct2->req_m.mode1.req_scsi_status |= 2071 CTIO2_RESP_VALID|CTIO2_RSPOVERUN; 2072 } else if (at2->req_datalen > s) { 2073 ct2->req_m.mode1.req_scsi_status |= 2074 CTIO2_RESP_VALID|CTIO2_RSPUNDERUN; 2075 } 2076 #endif 2077 break; 2078 2079 default: /* ALL OTHERS */ 2080 ct2->req_flags |= CTIO_NODATA | CTIO2_SMODE1; 2081 ct2->req_m.mode1.req_scsi_status = 0; 2082 #if 1 2083 if (at2->req_datalen) { 2084 ct2->req_m.mode1.req_scsi_status |= 2085 CTIO2_RSPUNDERUN; 2086 #if BYTE_ORDER == BIG_ENDIAN 2087 ct2->req_resid[1] = at2->req_datalen & 0xff; 2088 ct2->req_resid[0] = 2089 (at2->req_datalen >> 8) & 0xff; 2090 ct2->req_resid[3] = 2091 (at2->req_datalen >> 16) & 0xff; 2092 ct2->req_resid[2] = 2093 (at2->req_datalen >> 24) & 0xff; 2094 #else 2095 ct2->req_resid[0] = at2->req_datalen & 0xff; 2096 ct2->req_resid[1] = 2097 (at2->req_datalen >> 8) & 0xff; 2098 ct2->req_resid[2] = 2099 (at2->req_datalen >> 16) & 0xff; 2100 ct2->req_resid[3] = 2101 (at2->req_datalen >> 24) & 0xff; 2102 #endif 2103 } 2104 #endif 2105 if ((at2->req_status & ATIO_SENSEVALID) == 0) { 2106 ct2->req_m.mode1.req_sense_len = 18; 2107 ct2->req_m.mode1.req_scsi_status |= 2; 2108 ct2->req_m.mode1.req_response[0] = 0x70; 2109 ct2->req_m.mode1.req_response[2] = 0x2; 2110 } else { 2111 ct2->req_m.mode1.req_sense_len = 18; 2112 ct2->req_m.mode1.req_scsi_status |= 2113 at2->req_scsi_status; 2114 MEMCPY(ct2->req_m.mode1.req_response, 2115 at2->req_sense, sizeof (at2->req_sense)); 2116 } 2117 break; 2118 } 2119 reqsize = sizeof (*ct2); 2120 ireqp = ct2; 2121 break; 2122 } 2123 case RQSTYPE_CTIO2: 2124 { 2125 ispatiot2_t *at2; 2126 ispctiot2_t *ct2 = (ispctiot2_t *) sp; 2127 PRINTF("%s: CTIO2 returned status 0x%x\n", isp->isp_name, 2128 ct2->req_status); 2129 /* 2130 * Return the ATIO to the board. 2131 */ 2132 at2 = (ispatiot2_t *) sp; 2133 at2->req_header.rqs_entry_type = RQSTYPE_ATIO2; 2134 at2->req_header.rqs_entry_count = 1; 2135 at2->req_header.rqs_flags = 0; 2136 at2->req_header.rqs_seqno = isp->isp_seqno++; 2137 at2->req_status = 1; 2138 reqsize = sizeof (*at2); 2139 ireqp = at2; 2140 break; 2141 } 2142 #undef atio 2143 #undef at2io 2144 #undef ctio 2145 #undef ct2io 2146 #undef lunen 2147 #undef inot 2148 #undef inot_fc 2149 #undef nack 2150 #undef nack_fc 2151 #endif 2152 default: 2153 PRINTF("%s: other response type %x\n", isp->isp_name, 2154 sp->req_header.rqs_entry_type); 2155 break; 2156 } 2157 if (reqsize) { 2158 void *reqp; 2159 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 2160 iptr = isp->isp_reqidx; 2161 reqp = (void *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 2162 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 2163 if (iptr == optr) { 2164 PRINTF("%s: Request Queue Overflow other response\n", 2165 isp->isp_name); 2166 } else { 2167 MEMCPY(reqp, ireqp, reqsize); 2168 ISP_WRITE(isp, INMAILBOX4, iptr); 2169 isp->isp_reqidx = iptr; 2170 } 2171 } 2172 return (0); 2173 } 2174 2175 #ifdef ISP_TARGET_MODE 2176 2177 static void isp_tmd_newcmd_dflt __P((void *, tmd_cmd_t *)); 2178 static void isp_tmd_event_dflt __P((void *, int)); 2179 static void isp_tmd_notify_dflt __P((void *, tmd_notify_t *)); 2180 2181 static void isp_tgt_data_xfer __P ((tmd_cmd_t *)); 2182 static void isp_tgt_endcmd __P ((tmd_cmd_t *, u_int8_t)); 2183 static void isp_tgt_done __P ((tmd_cmd_t *)); 2184 2185 static void 2186 isp_tmd_newcmd_dflt(arg0, cmdp) 2187 void *arg0; 2188 tmd_cmd_t *cmdp; 2189 { 2190 } 2191 2192 static void 2193 isp_tmd_event_dflt(arg0, event) 2194 void *arg0; 2195 int event; 2196 { 2197 } 2198 2199 static void 2200 isp_tmd_notify_dflt(arg0, npt) 2201 void *arg0; 2202 tmd_notify_t *npt; 2203 { 2204 } 2205 2206 /* 2207 * Locks held, and ints disabled (if FC). 2208 * 2209 * XXX: SETUP ONLY FOR INITIAL ENABLING RIGHT NOW 2210 */ 2211 static int 2212 isp_modify_lun(isp, lun, icnt, ccnt) 2213 struct ispsoftc *isp; 2214 int lun; /* logical unit to enable, modify, or disable */ 2215 int icnt; /* immediate notify count */ 2216 int ccnt; /* command count */ 2217 { 2218 isplun_t *ip = NULL; 2219 u_int8_t iptr, optr; 2220 2221 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 2222 iptr = isp->isp_reqidx; 2223 ip = (isplun_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 2224 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 2225 if (iptr == optr) { 2226 PRINTF("%s: Request Queue Overflow in isp_modify_lun\n", 2227 isp->isp_name); 2228 return (-1); 2229 } 2230 2231 MEMZERO((void *) ip, sizeof (*ip)); 2232 ip->req_header.rqs_entry_type = RQSTYPE_ENABLE_LUN; 2233 ip->req_header.rqs_entry_count = 1; 2234 ip->req_header.rqs_seqno = isp->isp_seqno++; 2235 ip->req_handle = RQSTYPE_ENABLE_LUN; 2236 if (isp->isp_type & ISP_HA_SCSI) { 2237 ip->req_lun = lun; 2238 } 2239 ip->req_cmdcount = ccnt; 2240 ip->req_imcount = icnt; 2241 ip->req_timeout = 0; /* default 30 seconds */ 2242 ISP_WRITE(isp, INMAILBOX4, iptr); 2243 isp->isp_reqidx = iptr; 2244 return (0); 2245 } 2246 2247 static void 2248 isp_notify_ack(isp, ptrp) 2249 struct ispsoftc *isp; 2250 void *ptrp; 2251 { 2252 void *reqp; 2253 u_int8_t iptr, optr; 2254 union { 2255 na_fcentry_t _naf; 2256 na_entry_t _nas; 2257 } un; 2258 2259 MEMZERO((caddr_t)&un, sizeof (un)); 2260 un._nas.na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK; 2261 un._nas.na_header.rqs_entry_count = 1; 2262 2263 if (isp->isp_type & ISP_HA_FC) { 2264 na_fcentry_t *na = &un._nas; 2265 if (ptrp) { 2266 in_fcentry_t *inp = ptrp; 2267 na->na_iid = inp->in_iid; 2268 na->na_lun = inp->in_lun; 2269 na->na_task_flags = inp->in_task_flags; 2270 na->na_seqid = inp->in_seqid; 2271 na->na_status = inp->in_status; 2272 } else { 2273 na->na_flags = NAFC_RST_CLRD; 2274 } 2275 } else { 2276 na_entry_t *na = &un._nas; 2277 if (ptrp) { 2278 in_entry_t *inp = ptrp; 2279 na->na_iid = inp->in_iid; 2280 na->na_lun = inp->in_lun; 2281 na->na_tgt = inp->in_tgt; 2282 na->na_seqid = inp->in_seqid; 2283 } else { 2284 na->na_flags = NA_RST_CLRD; 2285 } 2286 } 2287 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 2288 iptr = isp->isp_reqidx; 2289 reqp = (void *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 2290 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 2291 if (iptr == optr) { 2292 PRINTF("%s: Request Queue Overflow For isp_notify_ack\n", 2293 isp->isp_name); 2294 } else { 2295 MEMCPY(reqp, ireqp, sizeof (un)); 2296 ISP_WRITE(isp, INMAILBOX4, iptr); 2297 isp->isp_reqidx = iptr; 2298 } 2299 } 2300 2301 /* 2302 * These are dummy stubs for now until the outside framework is plugged in. 2303 */ 2304 2305 static void 2306 isp_handle_atio (isp, aep) 2307 struct ispsoftc *isp; 2308 at_entry_t *aep; 2309 { 2310 int status, connected; 2311 tmd_cmd_t local, *cdp = &local; 2312 2313 /* 2314 * Get the ATIO status and see if we're still connected. 2315 */ 2316 status = aep->at_status; 2317 connected = ((aep->at_flags & AT_NODISC) != 0); 2318 2319 PRINTF("%s: ATIO status=0x%x, connected=%d\n", isp->isp_name, 2320 status, connected); 2321 2322 /* 2323 * The firmware status (except for the SenseValid bit) indicates 2324 * why this ATIO was sent to us. 2325 * If SenseValid is set, the firware has recommended Sense Data. 2326 * If the Disconnects Disabled bit is set in the flags field, 2327 * we're still connected on the SCSI bus - i.e. the initiator 2328 * did not set DiscPriv in the identify message. We don't care 2329 * about this so it's ignored. 2330 */ 2331 switch (status & ~TGTSVALID) { 2332 case AT_PATH_INVALID: 2333 /* 2334 * ATIO rejected by the firmware due to disabled lun. 2335 */ 2336 PRINTF("%s: Firmware rejected ATIO for disabled lun %d\n", 2337 isp->isp_name, aep->at_lun); 2338 break; 2339 2340 case AT_PHASE_ERROR: 2341 /* 2342 * Bus Pase Sequence error. 2343 * 2344 * The firmware should have filled in the correct 2345 * sense data. 2346 */ 2347 2348 2349 if (status & TGTSVALID) { 2350 MEMCPY(&cdp->cd_sensedata, aep->at_sense, 2351 sizeof (cdp->cd_sensedata)); 2352 PRINTF("%s: Bus Phase Sequence error key 0x%x\n", 2353 isp->isp_name, cdp->cd_sensedata[2] & 0xf); 2354 } else { 2355 PRINTF("%s: Bus Phase Sequence With No Sense\n", 2356 isp->isp_name); 2357 } 2358 (*isp->isp_tmd_newcmd)(isp, cdp); 2359 break; 2360 2361 case AT_NOCAP: 2362 /* 2363 * Requested Capability not available 2364 * We sent an ATIO that overflowed the firmware's 2365 * command resource count. 2366 */ 2367 PRINTF("%s: Firmware rejected ATIO, command count overflow\n", 2368 isp->isp_name); 2369 break; 2370 2371 case AT_BDR_MSG: 2372 /* 2373 * If we send an ATIO to the firmware to increment 2374 * its command resource count, and the firmware is 2375 * recovering from a Bus Device Reset, it returns 2376 * the ATIO with this status. 2377 */ 2378 PRINTF("%s: ATIO returned with BDR received\n", isp->isp_name); 2379 break; 2380 2381 case AT_CDB: 2382 /* 2383 * New CDB 2384 */ 2385 cdp->cd_hba = isp; 2386 cdp->cd_iid = aep->at_iid; 2387 cdp->cd_tgt = aep->at_tgt; 2388 cdp->cd_lun = aep->at_lun; 2389 cdp->cd_tagtype = aep->at_tag_type; 2390 cdp->cd_tagval = aep->at_tag_val; 2391 MEMCPY(cdp->cd_cdb, aep->at_cdb, 16); 2392 PRINTF("%s: CDB 0x%x itl %d/%d/%d\n", isp->isp_name, 2393 cdp->cd_cdb[0], cdp->cd_iid, cdp->cd_tgt, cdp->cd_lun); 2394 (*isp->isp_tmd_newcmd)(isp, cdp); 2395 break; 2396 2397 default: 2398 PRINTF("%s: Unknown status (0x%x) in ATIO\n", 2399 isp->isp_name, status); 2400 cdp->cd_hba = isp; 2401 cdp->cd_iid = aep->at_iid; 2402 cdp->cd_tgt = aep->at_tgt; 2403 cdp->cd_lun = aep->at_lun; 2404 cdp->cd_tagtype = aep->at_tag_type; 2405 cdp->cd_tagval = aep->at_tag_val; 2406 isp_tgtcmd_done(cdp); 2407 break; 2408 } 2409 } 2410 2411 static void 2412 isp_handle_atio2(isp, aep) 2413 struct ispsoftc *isp; 2414 at2_entry_t *aep; 2415 { 2416 int status; 2417 tmd_cmd_t local, *cdp = &local; 2418 2419 /* 2420 * Get the ATIO2 status. 2421 */ 2422 status = aep->at_status; 2423 PRINTD("%s: ATIO2 status=0x%x\n", status); 2424 2425 /* 2426 * The firmware status (except for the SenseValid bit) indicates 2427 * why this ATIO was sent to us. 2428 * If SenseValid is set, the firware has recommended Sense Data. 2429 */ 2430 switch (status & ~TGTSVALID) { 2431 case AT_PATH_INVALID: 2432 /* 2433 * ATIO rejected by the firmware due to disabled lun. 2434 */ 2435 PRINTF("%s: Firmware rejected ATIO2 for disabled lun %d\n", 2436 isp->isp_name, aep->at_lun); 2437 break; 2438 2439 case AT_NOCAP: 2440 /* 2441 * Requested Capability not available 2442 * We sent an ATIO that overflowed the firmware's 2443 * command resource count. 2444 */ 2445 PRINTF("%s: Firmware rejected ATIO2, command count overflow\n", 2446 isp->isp_name); 2447 break; 2448 2449 case AT_BDR_MSG: 2450 /* 2451 * If we send an ATIO to the firmware to increment 2452 * its command resource count, and the firmware is 2453 * recovering from a Bus Device Reset, it returns 2454 * the ATIO with this status. 2455 */ 2456 PRINTF("%s: ATIO2 returned with BDR rcvd\n", isp->isp_name); 2457 break; 2458 2459 case AT_CDB: 2460 /* 2461 * New CDB 2462 */ 2463 cdp->cd_hba = isp; 2464 cdp->cd_iid = aep->at_iid; 2465 cdp->cd_tgt = 0; 2466 cdp->cd_lun = aep->at_lun; 2467 MEMCPY(cdp->cd_cdb, aep->at_cdb, 16); 2468 cdp->cd_rxid = aep->at_rxid; 2469 cdp->cp_origdlen = aep->at_datalen; 2470 cdp->cp_totbytes = 0; 2471 PRINTF("%s: CDB 0x%x rx_id 0x%x itl %d/%d/%d dlen %d\n", 2472 isp->isp_name, cdp->cd_cdb[0], cdp->cd_tagval, cdp->cd_iid, 2473 cdp->cd_tgt, cdp->cd_lun, aep->at_datalen); 2474 (*isp->isp_tmd_newcmd)(isp, cdp); 2475 break; 2476 2477 default: 2478 PRINTF("%s: Unknown status (0x%x) in ATIO2\n", 2479 isp->isp_name, status); 2480 cdp->cd_hba = isp; 2481 cdp->cd_iid = aep->at_iid; 2482 cdp->cd_tgt = aep->at_tgt; 2483 cdp->cd_lun = aep->at_lun; 2484 cdp->cp_rxid = aep->at_rxid; 2485 isp_tgtcmd_done(cdp); 2486 break; 2487 } 2488 } 2489 2490 static void 2491 isp_handle_ctio(isp, cep) 2492 struct ispsoftc *isp; 2493 ct_entry_t *aep; 2494 { 2495 } 2496 2497 static void 2498 isp_handle_ctio2(isp, cep) 2499 struct ispsoftc *isp; 2500 at2_entry_t *aep; 2501 { 2502 } 2503 #endif 2504 2505 static void 2506 isp_parse_status(isp, sp, xs) 2507 struct ispsoftc *isp; 2508 ispstatusreq_t *sp; 2509 ISP_SCSI_XFER_T *xs; 2510 { 2511 switch (sp->req_completion_status) { 2512 case RQCS_COMPLETE: 2513 XS_SETERR(xs, HBA_NOERROR); 2514 return; 2515 2516 case RQCS_INCOMPLETE: 2517 if ((sp->req_state_flags & RQSF_GOT_TARGET) == 0) { 2518 IDPRINTF(3, ("%s: Selection Timeout for target %d\n", 2519 isp->isp_name, XS_TGT(xs))); 2520 XS_SETERR(xs, HBA_SELTIMEOUT); 2521 return; 2522 } 2523 PRINTF("%s: command incomplete for target %d lun %d, state " 2524 "0x%x\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs), 2525 sp->req_state_flags); 2526 break; 2527 2528 case RQCS_DMA_ERROR: 2529 PRINTF("%s: DMA error for command on target %d, lun %d\n", 2530 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2531 break; 2532 2533 case RQCS_TRANSPORT_ERROR: 2534 PRINTF("%s: transport error\n", isp->isp_name); 2535 isp_prtstst(sp); 2536 break; 2537 2538 case RQCS_RESET_OCCURRED: 2539 IDPRINTF(2, ("%s: bus reset destroyed command for target %d " 2540 "lun %d\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs))); 2541 isp->isp_sendmarker = 1; 2542 XS_SETERR(xs, HBA_BUSRESET); 2543 return; 2544 2545 case RQCS_ABORTED: 2546 PRINTF("%s: command aborted for target %d lun %d\n", 2547 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2548 isp->isp_sendmarker = 1; 2549 XS_SETERR(xs, HBA_ABORTED); 2550 return; 2551 2552 case RQCS_TIMEOUT: 2553 IDPRINTF(2, ("%s: command timed out for target %d lun %d\n", 2554 isp->isp_name, XS_TGT(xs), XS_LUN(xs))); 2555 XS_SETERR(xs, HBA_CMDTIMEOUT); 2556 return; 2557 2558 case RQCS_DATA_OVERRUN: 2559 if (isp->isp_type & ISP_HA_FC) { 2560 XS_RESID(xs) = sp->req_resid; 2561 break; 2562 } 2563 XS_SETERR(xs, HBA_DATAOVR); 2564 return; 2565 2566 case RQCS_COMMAND_OVERRUN: 2567 PRINTF("%s: command overrun for command on target %d, lun %d\n", 2568 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2569 break; 2570 2571 case RQCS_STATUS_OVERRUN: 2572 PRINTF("%s: status overrun for command on target %d, lun %d\n", 2573 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2574 break; 2575 2576 case RQCS_BAD_MESSAGE: 2577 PRINTF("%s: message not COMMAND COMPLETE after status on " 2578 "target %d, lun %d\n", isp->isp_name, XS_TGT(xs), 2579 XS_LUN(xs)); 2580 break; 2581 2582 case RQCS_NO_MESSAGE_OUT: 2583 PRINTF("%s: No MESSAGE OUT phase after selection on " 2584 "target %d, lun %d\n", isp->isp_name, XS_TGT(xs), 2585 XS_LUN(xs)); 2586 break; 2587 2588 case RQCS_EXT_ID_FAILED: 2589 PRINTF("%s: EXTENDED IDENTIFY failed on target %d, lun %d\n", 2590 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2591 break; 2592 2593 case RQCS_IDE_MSG_FAILED: 2594 PRINTF("%s: target %d lun %d rejected INITIATOR DETECTED " 2595 "ERROR message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2596 break; 2597 2598 case RQCS_ABORT_MSG_FAILED: 2599 PRINTF("%s: target %d lun %d rejected ABORT message\n", 2600 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2601 break; 2602 2603 case RQCS_REJECT_MSG_FAILED: 2604 PRINTF("%s: target %d lun %d rejected MESSAGE REJECT message\n", 2605 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2606 break; 2607 2608 case RQCS_NOP_MSG_FAILED: 2609 PRINTF("%s: target %d lun %d rejected NOP message\n", 2610 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2611 break; 2612 2613 case RQCS_PARITY_ERROR_MSG_FAILED: 2614 PRINTF("%s: target %d lun %d rejected MESSAGE PARITY ERROR " 2615 "message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2616 break; 2617 2618 case RQCS_DEVICE_RESET_MSG_FAILED: 2619 PRINTF("%s: target %d lun %d rejected BUS DEVICE RESET " 2620 "message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2621 break; 2622 2623 case RQCS_ID_MSG_FAILED: 2624 PRINTF("%s: target %d lun %d rejected IDENTIFY " 2625 "message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2626 break; 2627 2628 case RQCS_UNEXP_BUS_FREE: 2629 PRINTF("%s: target %d lun %d had an unexpected bus free\n", 2630 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2631 break; 2632 2633 case RQCS_DATA_UNDERRUN: 2634 if (isp->isp_type & ISP_HA_FC) { 2635 XS_RESID(xs) = sp->req_resid; 2636 /* an UNDERRUN is not a botch ??? */ 2637 } 2638 XS_SETERR(xs, HBA_NOERROR); 2639 return; 2640 2641 case RQCS_XACT_ERR1: 2642 PRINTF("%s: HBA attempted queued transaction with disconnect " 2643 "not set for target %d lun %d\n", isp->isp_name, XS_TGT(xs), 2644 XS_LUN(xs)); 2645 break; 2646 2647 case RQCS_XACT_ERR2: 2648 PRINTF("%s: HBA attempted queued transaction to target " 2649 "routine %d on target %d\n", isp->isp_name, XS_LUN(xs), 2650 XS_TGT(xs)); 2651 break; 2652 2653 case RQCS_XACT_ERR3: 2654 PRINTF("%s: HBA attempted queued transaction for target %d lun " 2655 "%d when queueing disabled\n", isp->isp_name, XS_TGT(xs), 2656 XS_LUN(xs)); 2657 break; 2658 2659 case RQCS_BAD_ENTRY: 2660 PRINTF("%s: invalid IOCB entry type detected\n", isp->isp_name); 2661 break; 2662 2663 case RQCS_QUEUE_FULL: 2664 PRINTF("%s: internal queues full for target %d lun %d " 2665 "status 0x%x\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs), 2666 XS_STS(xs)); 2667 /* 2668 * If QFULL or some other status byte is set, then this 2669 * isn't an error, per se. 2670 */ 2671 if (XS_STS(xs) != 0) { 2672 XS_SETERR(xs, HBA_NOERROR); 2673 return; 2674 } 2675 break; 2676 2677 case RQCS_PHASE_SKIPPED: 2678 PRINTF("%s: SCSI phase skipped (e.g., COMMAND COMPLETE w/o " 2679 "STATUS phase) for target %d lun %d\n", isp->isp_name, 2680 XS_TGT(xs), XS_LUN(xs)); 2681 break; 2682 2683 case RQCS_ARQS_FAILED: 2684 PRINTF("%s: Auto Request Sense failed for target %d lun %d\n", 2685 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2686 XS_SETERR(xs, HBA_ARQFAIL); 2687 return; 2688 2689 case RQCS_WIDE_FAILED: 2690 PRINTF("%s: Wide Negotiation failed for target %d lun %d\n", 2691 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2692 if (isp->isp_type & ISP_HA_SCSI) { 2693 sdparam *sdp = isp->isp_param; 2694 isp->isp_update = 1; 2695 sdp->isp_devparam[XS_TGT(xs)].dev_flags &= ~DPARM_WIDE; 2696 sdp->isp_devparam[XS_TGT(xs)].dev_update = 1; 2697 } 2698 XS_SETERR(xs, HBA_NOERROR); 2699 return; 2700 2701 case RQCS_SYNCXFER_FAILED: 2702 PRINTF("%s: SDTR Message failed for target %d lun %d\n", 2703 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2704 if (isp->isp_type & ISP_HA_SCSI) { 2705 sdparam *sdp = isp->isp_param; 2706 isp->isp_update = 1; 2707 sdp->isp_devparam[XS_TGT(xs)].dev_flags &= ~DPARM_SYNC; 2708 sdp->isp_devparam[XS_TGT(xs)].dev_update = 1; 2709 } 2710 break; 2711 2712 case RQCS_LVD_BUSERR: 2713 PRINTF("%s: Bad LVD Bus condition while talking to target %d " 2714 "lun %d\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2715 break; 2716 2717 case RQCS_PORT_UNAVAILABLE: 2718 /* 2719 * No such port on the loop. Moral equivalent of SELTIMEO 2720 */ 2721 IDPRINTF(3, ("%s: Port Unavailable for target %d\n", 2722 isp->isp_name, XS_TGT(xs))); 2723 XS_SETERR(xs, HBA_SELTIMEOUT); 2724 return; 2725 2726 case RQCS_PORT_LOGGED_OUT: 2727 /* 2728 * It was there (maybe)- treat as a selection timeout. 2729 */ 2730 PRINTF("%s: port logout for target %d\n", 2731 isp->isp_name, XS_TGT(xs)); 2732 XS_SETERR(xs, HBA_SELTIMEOUT); 2733 return; 2734 2735 case RQCS_PORT_CHANGED: 2736 PRINTF("%s: port changed for target %d\n", 2737 isp->isp_name, XS_TGT(xs)); 2738 break; 2739 2740 case RQCS_PORT_BUSY: 2741 PRINTF("%s: port busy for target %d\n", 2742 isp->isp_name, XS_TGT(xs)); 2743 XS_SETERR(xs, HBA_TGTBSY); 2744 return; 2745 2746 default: 2747 PRINTF("%s: comp status %x\n", isp->isp_name, 2748 sp->req_completion_status); 2749 break; 2750 } 2751 XS_SETERR(xs, HBA_BOTCH); 2752 } 2753 2754 static void 2755 isp_fastpost_complete(isp, fph) 2756 struct ispsoftc *isp; 2757 int fph; 2758 { 2759 ISP_SCSI_XFER_T *xs; 2760 2761 if (fph < 1) 2762 return; 2763 xs = (ISP_SCSI_XFER_T *) isp->isp_xflist[fph - 1]; 2764 isp->isp_xflist[fph - 1] = NULL; 2765 if (xs == NULL) { 2766 PRINTF("%s: fast posting handle 0x%x not found\n", 2767 isp->isp_name, fph - 1); 2768 return; 2769 } 2770 /* 2771 * Since we don't have a result queue entry item, 2772 * we must believe that SCSI status is zero and 2773 * that all data transferred. 2774 */ 2775 XS_RESID(xs) = 0; 2776 XS_STS(xs) = 0; 2777 if (XS_XFRLEN(xs)) { 2778 ISP_DMAFREE(isp, xs, fph - 1); 2779 } 2780 XS_CMD_DONE(xs); 2781 } 2782 2783 #define HINIB(x) ((x) >> 0x4) 2784 #define LONIB(x) ((x) & 0xf) 2785 #define MAKNIB(a, b) (((a) << 4) | (b)) 2786 static u_int8_t mbpcnt[] = { 2787 MAKNIB(1, 1), /* 0x00: MBOX_NO_OP */ 2788 MAKNIB(5, 5), /* 0x01: MBOX_LOAD_RAM */ 2789 MAKNIB(2, 0), /* 0x02: MBOX_EXEC_FIRMWARE */ 2790 MAKNIB(5, 5), /* 0x03: MBOX_DUMP_RAM */ 2791 MAKNIB(3, 3), /* 0x04: MBOX_WRITE_RAM_WORD */ 2792 MAKNIB(2, 3), /* 0x05: MBOX_READ_RAM_WORD */ 2793 MAKNIB(6, 6), /* 0x06: MBOX_MAILBOX_REG_TEST */ 2794 MAKNIB(2, 3), /* 0x07: MBOX_VERIFY_CHECKSUM */ 2795 MAKNIB(1, 3), /* 0x08: MBOX_ABOUT_FIRMWARE */ 2796 MAKNIB(0, 0), /* 0x09: */ 2797 MAKNIB(0, 0), /* 0x0a: */ 2798 MAKNIB(0, 0), /* 0x0b: */ 2799 MAKNIB(0, 0), /* 0x0c: */ 2800 MAKNIB(0, 0), /* 0x0d: */ 2801 MAKNIB(1, 2), /* 0x0e: MBOX_CHECK_FIRMWARE */ 2802 MAKNIB(0, 0), /* 0x0f: */ 2803 MAKNIB(5, 5), /* 0x10: MBOX_INIT_REQ_QUEUE */ 2804 MAKNIB(6, 6), /* 0x11: MBOX_INIT_RES_QUEUE */ 2805 MAKNIB(4, 4), /* 0x12: MBOX_EXECUTE_IOCB */ 2806 MAKNIB(2, 2), /* 0x13: MBOX_WAKE_UP */ 2807 MAKNIB(1, 6), /* 0x14: MBOX_STOP_FIRMWARE */ 2808 MAKNIB(4, 4), /* 0x15: MBOX_ABORT */ 2809 MAKNIB(2, 2), /* 0x16: MBOX_ABORT_DEVICE */ 2810 MAKNIB(3, 3), /* 0x17: MBOX_ABORT_TARGET */ 2811 MAKNIB(3, 1), /* 0x18: MBOX_BUS_RESET */ 2812 MAKNIB(2, 3), /* 0x19: MBOX_STOP_QUEUE */ 2813 MAKNIB(2, 3), /* 0x1a: MBOX_START_QUEUE */ 2814 MAKNIB(2, 3), /* 0x1b: MBOX_SINGLE_STEP_QUEUE */ 2815 MAKNIB(2, 3), /* 0x1c: MBOX_ABORT_QUEUE */ 2816 MAKNIB(2, 4), /* 0x1d: MBOX_GET_DEV_QUEUE_STATUS */ 2817 MAKNIB(0, 0), /* 0x1e: */ 2818 MAKNIB(1, 3), /* 0x1f: MBOX_GET_FIRMWARE_STATUS */ 2819 MAKNIB(1, 3), /* 0x20: MBOX_GET_INIT_SCSI_ID, MBOX_GET_LOOP_ID */ 2820 MAKNIB(1, 2), /* 0x21: MBOX_GET_SELECT_TIMEOUT */ 2821 MAKNIB(1, 3), /* 0x22: MBOX_GET_RETRY_COUNT */ 2822 MAKNIB(1, 2), /* 0x23: MBOX_GET_TAG_AGE_LIMIT */ 2823 MAKNIB(1, 2), /* 0x24: MBOX_GET_CLOCK_RATE */ 2824 MAKNIB(1, 2), /* 0x25: MBOX_GET_ACT_NEG_STATE */ 2825 MAKNIB(1, 2), /* 0x26: MBOX_GET_ASYNC_DATA_SETUP_TIME */ 2826 MAKNIB(1, 3), /* 0x27: MBOX_GET_PCI_PARAMS */ 2827 MAKNIB(2, 4), /* 0x28: MBOX_GET_TARGET_PARAMS */ 2828 MAKNIB(2, 4), /* 0x29: MBOX_GET_DEV_QUEUE_PARAMS */ 2829 MAKNIB(0, 0), /* 0x2a: */ 2830 MAKNIB(0, 0), /* 0x2b: */ 2831 MAKNIB(0, 0), /* 0x2c: */ 2832 MAKNIB(0, 0), /* 0x2d: */ 2833 MAKNIB(0, 0), /* 0x2e: */ 2834 MAKNIB(0, 0), /* 0x2f: */ 2835 MAKNIB(2, 2), /* 0x30: MBOX_SET_INIT_SCSI_ID */ 2836 MAKNIB(2, 2), /* 0x31: MBOX_SET_SELECT_TIMEOUT */ 2837 MAKNIB(3, 3), /* 0x32: MBOX_SET_RETRY_COUNT */ 2838 MAKNIB(2, 2), /* 0x33: MBOX_SET_TAG_AGE_LIMIT */ 2839 MAKNIB(2, 2), /* 0x34: MBOX_SET_CLOCK_RATE */ 2840 MAKNIB(2, 2), /* 0x35: MBOX_SET_ACTIVE_NEG_STATE */ 2841 MAKNIB(2, 2), /* 0x36: MBOX_SET_ASYNC_DATA_SETUP_TIME */ 2842 MAKNIB(3, 3), /* 0x37: MBOX_SET_PCI_CONTROL_PARAMS */ 2843 MAKNIB(4, 4), /* 0x38: MBOX_SET_TARGET_PARAMS */ 2844 MAKNIB(4, 4), /* 0x39: MBOX_SET_DEV_QUEUE_PARAMS */ 2845 MAKNIB(0, 0), /* 0x3a: */ 2846 MAKNIB(0, 0), /* 0x3b: */ 2847 MAKNIB(0, 0), /* 0x3c: */ 2848 MAKNIB(0, 0), /* 0x3d: */ 2849 MAKNIB(0, 0), /* 0x3e: */ 2850 MAKNIB(0, 0), /* 0x3f: */ 2851 MAKNIB(1, 2), /* 0x40: MBOX_RETURN_BIOS_BLOCK_ADDR */ 2852 MAKNIB(6, 1), /* 0x41: MBOX_WRITE_FOUR_RAM_WORDS */ 2853 MAKNIB(2, 3), /* 0x42: MBOX_EXEC_BIOS_IOCB */ 2854 MAKNIB(0, 0), /* 0x43: */ 2855 MAKNIB(0, 0), /* 0x44: */ 2856 MAKNIB(0, 0), /* 0x45: */ 2857 MAKNIB(0, 0), /* 0x46: */ 2858 MAKNIB(0, 0), /* 0x47: */ 2859 MAKNIB(0, 0), /* 0x48: */ 2860 MAKNIB(0, 0), /* 0x49: */ 2861 MAKNIB(2, 1), /* 0x4a: MBOX_SET_FIRMWARE_FEATURES */ 2862 MAKNIB(1, 2), /* 0x4b: MBOX_GET_FIRMWARE_FEATURES */ 2863 MAKNIB(0, 0), /* 0x4c: */ 2864 MAKNIB(0, 0), /* 0x4d: */ 2865 MAKNIB(0, 0), /* 0x4e: */ 2866 MAKNIB(0, 0), /* 0x4f: */ 2867 MAKNIB(0, 0), /* 0x50: */ 2868 MAKNIB(0, 0), /* 0x51: */ 2869 MAKNIB(0, 0), /* 0x52: */ 2870 MAKNIB(0, 0), /* 0x53: */ 2871 MAKNIB(8, 0), /* 0x54: MBOX_EXEC_COMMAND_IOCB_A64 */ 2872 MAKNIB(0, 0), /* 0x55: */ 2873 MAKNIB(0, 0), /* 0x56: */ 2874 MAKNIB(0, 0), /* 0x57: */ 2875 MAKNIB(0, 0), /* 0x58: */ 2876 MAKNIB(0, 0), /* 0x59: */ 2877 MAKNIB(0, 0), /* 0x5a: */ 2878 MAKNIB(0, 0), /* 0x5b: */ 2879 MAKNIB(0, 0), /* 0x5c: */ 2880 MAKNIB(0, 0), /* 0x5d: */ 2881 MAKNIB(0, 0), /* 0x5e: */ 2882 MAKNIB(0, 0), /* 0x5f: */ 2883 MAKNIB(8, 6), /* 0x60: MBOX_INIT_FIRMWARE */ 2884 MAKNIB(0, 0), /* 0x60: MBOX_GET_INIT_CONTROL_BLOCK (FORMAT?) */ 2885 MAKNIB(2, 1), /* 0x62: MBOX_INIT_LIP */ 2886 MAKNIB(8, 1), /* 0x63: MBOX_GET_FC_AL_POSITION_MAP */ 2887 MAKNIB(8, 1), /* 0x64: MBOX_GET_PORT_DB */ 2888 MAKNIB(3, 1), /* 0x65: MBOX_CLEAR_ACA */ 2889 MAKNIB(3, 1), /* 0x66: MBOX_TARGET_RESET */ 2890 MAKNIB(3, 1), /* 0x67: MBOX_CLEAR_TASK_SET */ 2891 MAKNIB(3, 1), /* 0x68: MBOX_ABORT_TASK_SET */ 2892 MAKNIB(1, 2), /* 0x69: MBOX_GET_FW_STATE */ 2893 MAKNIB(2, 8), /* 0x6a: MBOX_GET_PORT_NAME */ 2894 MAKNIB(8, 1), /* 0x6b: MBOX_GET_LINK_STATUS */ 2895 MAKNIB(4, 4), /* 0x6c: MBOX_INIT_LIP_RESET */ 2896 MAKNIB(0, 0), /* 0x6d: */ 2897 MAKNIB(0, 0), /* 0x6e: */ 2898 MAKNIB(0, 0), /* 0x6f: */ 2899 MAKNIB(0, 0), /* 0x70: */ 2900 MAKNIB(0, 0), /* 0x71: */ 2901 MAKNIB(4, 1) /* 0x72: MBOX_INIT_LIP_LOGIN */ 2902 }; 2903 #define NMBCOM (sizeof (mbpcnt) / sizeof (mbpcnt[0])) 2904 2905 static void 2906 isp_mboxcmd(isp, mbp) 2907 struct ispsoftc *isp; 2908 mbreg_t *mbp; 2909 { 2910 int outparam, inparam; 2911 int loops, dld = 0; 2912 u_int8_t opcode; 2913 2914 if (mbp->param[0] == ISP2100_SET_PCI_PARAM) { 2915 opcode = mbp->param[0] = MBOX_SET_PCI_PARAMETERS; 2916 inparam = 4; 2917 outparam = 4; 2918 goto command_known; 2919 } else if (mbp->param[0] > NMBCOM) { 2920 PRINTF("%s: bad command %x\n", isp->isp_name, mbp->param[0]); 2921 return; 2922 } 2923 2924 opcode = mbp->param[0]; 2925 inparam = HINIB(mbpcnt[mbp->param[0]]); 2926 outparam = LONIB(mbpcnt[mbp->param[0]]); 2927 2928 if (inparam == 0 && outparam == 0) { 2929 PRINTF("%s: no parameters for %x\n", isp->isp_name, 2930 mbp->param[0]); 2931 return; 2932 } 2933 2934 2935 /* 2936 * Check for variants 2937 */ 2938 #ifdef ISP2100_SCCLUN 2939 if (isp->isp_type & ISP_HA_FC) { 2940 switch (mbp->param[0]) { 2941 case MBOX_ABORT: 2942 inparam = 7; 2943 break; 2944 case MBOX_ABORT_DEVICE: 2945 case MBOX_START_QUEUE: 2946 case MBOX_STOP_QUEUE: 2947 case MBOX_SINGLE_STEP_QUEUE: 2948 case MBOX_ABORT_QUEUE: 2949 case MBOX_GET_DEV_QUEUE_STATUS: 2950 inparam = 3; 2951 break; 2952 default: 2953 break; 2954 } 2955 } 2956 #endif 2957 2958 command_known: 2959 2960 /* 2961 * Set semaphore on mailbox registers to win any races to acquire them. 2962 */ 2963 ISP_WRITE(isp, BIU_SEMA, 1); 2964 2965 /* 2966 * Make sure we can send some words. Check to see id there's 2967 * an async mbox event pending. 2968 */ 2969 2970 loops = MBOX_DELAY_COUNT; 2971 while ((ISP_READ(isp, HCCR) & HCCR_HOST_INT) != 0) { 2972 SYS_DELAY(100); 2973 if (ISP_READ(isp, BIU_SEMA) & 1) { 2974 int fph; 2975 u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0); 2976 /* 2977 * We have a pending MBOX async event. 2978 */ 2979 if (mbox & 0x8000) { 2980 fph = isp_parse_async(isp, (int) mbox); 2981 ISP_WRITE(isp, BIU_SEMA, 0); 2982 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 2983 if (fph < 0) { 2984 return; 2985 } else if (fph > 0) { 2986 isp_fastpost_complete(isp, fph); 2987 } 2988 SYS_DELAY(100); 2989 goto command_known; 2990 } 2991 /* 2992 * We have a pending MBOX completion? Might be 2993 * from a previous command. We can't (sometimes) 2994 * just clear HOST INTERRUPT, so we'll just silently 2995 * eat this here. 2996 */ 2997 if (mbox == MBOX_COMMAND_COMPLETE) { 2998 ISP_WRITE(isp, BIU_SEMA, 0); 2999 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3000 SYS_DELAY(100); 3001 goto command_known; 3002 } 3003 } 3004 if (--loops < 0) { 3005 if (dld++ > 10) { 3006 PRINTF("%s: isp_mboxcmd could not get command " 3007 "started\n", isp->isp_name); 3008 return; 3009 } 3010 ISP_WRITE(isp, BIU_SEMA, 0); 3011 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3012 goto command_known; 3013 } 3014 } 3015 3016 /* 3017 * If we're a 1080 or a 1240, make sure that for a couple of commands 3018 * the port parameter is set. This is sort of a temporary solution 3019 * to do it here rather than every place a mailbox command is formed. 3020 */ 3021 if (IS_1080(isp) || IS_12X0(isp)) { 3022 switch (mbp->param[0]) { 3023 case MBOX_BUS_RESET: 3024 mbp->param[2] = isp->isp_port; 3025 break; 3026 default: 3027 break; 3028 } 3029 } 3030 3031 /* 3032 * Write input parameters. 3033 */ 3034 switch (inparam) { 3035 case 8: ISP_WRITE(isp, INMAILBOX7, mbp->param[7]); mbp->param[7] = 0; 3036 case 7: ISP_WRITE(isp, INMAILBOX6, mbp->param[6]); mbp->param[6] = 0; 3037 case 6: 3038 /* 3039 * The Qlogic 2100 cannot have registers 4 and 5 written to 3040 * after initialization or BAD THINGS HAPPEN (tm). 3041 */ 3042 if (IS_SCSI(isp) || mbp->param[0] == MBOX_INIT_FIRMWARE) 3043 ISP_WRITE(isp, INMAILBOX5, mbp->param[5]); 3044 mbp->param[5] = 0; 3045 case 5: 3046 if (IS_SCSI(isp) || mbp->param[0] == MBOX_INIT_FIRMWARE) 3047 ISP_WRITE(isp, INMAILBOX4, mbp->param[4]); 3048 mbp->param[4] = 0; 3049 case 4: ISP_WRITE(isp, INMAILBOX3, mbp->param[3]); mbp->param[3] = 0; 3050 case 3: ISP_WRITE(isp, INMAILBOX2, mbp->param[2]); mbp->param[2] = 0; 3051 case 2: ISP_WRITE(isp, INMAILBOX1, mbp->param[1]); mbp->param[1] = 0; 3052 case 1: ISP_WRITE(isp, INMAILBOX0, mbp->param[0]); mbp->param[0] = 0; 3053 } 3054 3055 /* 3056 * Clear RISC int condition. 3057 */ 3058 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3059 3060 /* 3061 * Clear semaphore on mailbox registers so that the Qlogic 3062 * may update outgoing registers. 3063 */ 3064 ISP_WRITE(isp, BIU_SEMA, 0); 3065 3066 ENABLE_INTS(isp); 3067 /* 3068 * Set Host Interrupt condition so that RISC will pick up mailbox regs. 3069 */ 3070 ISP_WRITE(isp, HCCR, HCCR_CMD_SET_HOST_INT); 3071 3072 /* 3073 * Wait until HOST INT has gone away (meaning that the Qlogic 3074 * has picked up the mailbox command. Wait a long time. 3075 */ 3076 loops = MBOX_DELAY_COUNT * 5; 3077 while ((ISP_READ(isp, HCCR) & HCCR_CMD_CLEAR_RISC_INT) != 0) { 3078 SYS_DELAY(100); 3079 if (--loops < 0) { 3080 PRINTF("%s: isp_mboxcmd timeout #2\n", isp->isp_name); 3081 return; 3082 } 3083 } 3084 3085 /* 3086 * While the Semaphore registers isn't set, wait for the Qlogic 3087 * to process the mailbox command. Again- wait a long time. 3088 */ 3089 loops = MBOX_DELAY_COUNT * 5; 3090 while ((ISP_READ(isp, BIU_SEMA) & 1) == 0) { 3091 SYS_DELAY(100); 3092 /* 3093 * Wierd- I've seen the case where the semaphore register 3094 * isn't getting set- sort of a violation of the protocol.. 3095 */ 3096 if (ISP_READ(isp, OUTMAILBOX0) & 0x4000) 3097 break; 3098 if (--loops < 0) { 3099 PRINTF("%s: isp_mboxcmd timeout #3\n", isp->isp_name); 3100 return; 3101 } 3102 } 3103 3104 /* 3105 * Make sure that the MBOX_BUSY has gone away 3106 */ 3107 loops = MBOX_DELAY_COUNT; 3108 for (;;) { 3109 u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0); 3110 if (mbox == MBOX_BUSY) { 3111 if (--loops < 0) { 3112 PRINTF("%s: isp_mboxcmd timeout #4\n", 3113 isp->isp_name); 3114 return; 3115 } 3116 SYS_DELAY(100); 3117 continue; 3118 } 3119 /* 3120 * We have a pending MBOX async event. 3121 */ 3122 if (mbox & 0x8000) { 3123 int fph = isp_parse_async(isp, (int) mbox); 3124 ISP_WRITE(isp, BIU_SEMA, 0); 3125 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3126 if (fph < 0) { 3127 return; 3128 } else if (fph > 0) { 3129 isp_fastpost_complete(isp, fph); 3130 } 3131 SYS_DELAY(100); 3132 continue; 3133 } 3134 break; 3135 } 3136 3137 /* 3138 * Pick up output parameters. 3139 */ 3140 switch (outparam) { 3141 case 8: mbp->param[7] = ISP_READ(isp, OUTMAILBOX7); 3142 case 7: mbp->param[6] = ISP_READ(isp, OUTMAILBOX6); 3143 case 6: mbp->param[5] = ISP_READ(isp, OUTMAILBOX5); 3144 case 5: mbp->param[4] = ISP_READ(isp, OUTMAILBOX4); 3145 case 4: mbp->param[3] = ISP_READ(isp, OUTMAILBOX3); 3146 case 3: mbp->param[2] = ISP_READ(isp, OUTMAILBOX2); 3147 case 2: mbp->param[1] = ISP_READ(isp, OUTMAILBOX1); 3148 case 1: mbp->param[0] = ISP_READ(isp, OUTMAILBOX0); 3149 } 3150 3151 /* 3152 * Clear RISC int. 3153 */ 3154 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3155 3156 /* 3157 * Release semaphore on mailbox registers 3158 */ 3159 ISP_WRITE(isp, BIU_SEMA, 0); 3160 3161 /* 3162 * Just to be chatty here... 3163 */ 3164 switch (mbp->param[0]) { 3165 case MBOX_COMMAND_COMPLETE: 3166 break; 3167 case MBOX_INVALID_COMMAND: 3168 IDPRINTF(2, ("%s: mbox cmd %x failed with INVALID_COMMAND\n", 3169 isp->isp_name, opcode)); 3170 break; 3171 case MBOX_HOST_INTERFACE_ERROR: 3172 PRINTF("%s: mbox cmd %x failed with HOST_INTERFACE_ERROR\n", 3173 isp->isp_name, opcode); 3174 break; 3175 case MBOX_TEST_FAILED: 3176 PRINTF("%s: mbox cmd %x failed with TEST_FAILED\n", 3177 isp->isp_name, opcode); 3178 break; 3179 case MBOX_COMMAND_ERROR: 3180 PRINTF("%s: mbox cmd %x failed with COMMAND_ERROR\n", 3181 isp->isp_name, opcode); 3182 break; 3183 case MBOX_COMMAND_PARAM_ERROR: 3184 switch (opcode) { 3185 case MBOX_GET_PORT_DB: 3186 case MBOX_GET_PORT_NAME: 3187 case MBOX_GET_DEV_QUEUE_PARAMS: 3188 break; 3189 default: 3190 PRINTF("%s: mbox cmd %x failed with " 3191 "COMMAND_PARAM_ERROR\n", isp->isp_name, opcode); 3192 } 3193 break; 3194 3195 /* 3196 * Be silent about these... 3197 */ 3198 3199 case ASYNC_LIP_OCCURRED: 3200 case ASYNC_LOOP_UP: 3201 case ASYNC_LOOP_DOWN: 3202 case ASYNC_LOOP_RESET: 3203 case ASYNC_CHANGE_NOTIFY: 3204 break; 3205 case ASYNC_PDB_CHANGED: 3206 isp_mark_getpdb_all(isp); 3207 break; 3208 3209 default: 3210 /* 3211 * The expected return of EXEC_FIRMWARE is zero. 3212 */ 3213 if ((opcode == MBOX_EXEC_FIRMWARE && mbp->param[0] != 0) || 3214 (opcode != MBOX_EXEC_FIRMWARE)) { 3215 PRINTF("%s: mbox cmd %x failed with error %x\n", 3216 isp->isp_name, opcode, mbp->param[0]); 3217 } 3218 break; 3219 } 3220 } 3221 3222 void 3223 isp_lostcmd(isp, xs) 3224 struct ispsoftc *isp; 3225 ISP_SCSI_XFER_T *xs; 3226 { 3227 mbreg_t mbs; 3228 3229 mbs.param[0] = MBOX_GET_FIRMWARE_STATUS; 3230 isp_mboxcmd(isp, &mbs); 3231 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3232 isp_dumpregs(isp, "couldn't GET FIRMWARE STATUS"); 3233 return; 3234 } 3235 if (mbs.param[1]) { 3236 PRINTF("%s: %d commands on completion queue\n", 3237 isp->isp_name, mbs.param[1]); 3238 } 3239 if (XS_NULL(xs)) 3240 return; 3241 3242 mbs.param[0] = MBOX_GET_DEV_QUEUE_STATUS; 3243 mbs.param[1] = (XS_TGT(xs) << 8) | XS_LUN(xs); 3244 isp_mboxcmd(isp, &mbs); 3245 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3246 isp_dumpregs(isp, "couldn't GET DEVICE QUEUE STATUS"); 3247 return; 3248 } 3249 PRINTF("%s: lost command for target %d lun %d, %d active of %d, " 3250 "Queue State: %x\n", isp->isp_name, XS_TGT(xs), 3251 XS_LUN(xs), mbs.param[2], mbs.param[3], mbs.param[1]); 3252 3253 isp_dumpregs(isp, "lost command"); 3254 /* 3255 * XXX: Need to try and do something to recover. 3256 */ 3257 } 3258 3259 static void 3260 isp_dumpregs(isp, msg) 3261 struct ispsoftc *isp; 3262 const char *msg; 3263 { 3264 PRINTF("%s: %s\n", isp->isp_name, msg); 3265 if (isp->isp_type & ISP_HA_SCSI) 3266 PRINTF(" biu_conf1=%x", ISP_READ(isp, BIU_CONF1)); 3267 else 3268 PRINTF(" biu_csr=%x", ISP_READ(isp, BIU2100_CSR)); 3269 PRINTF(" biu_icr=%x biu_isr=%x biu_sema=%x ", ISP_READ(isp, BIU_ICR), 3270 ISP_READ(isp, BIU_ISR), ISP_READ(isp, BIU_SEMA)); 3271 PRINTF("risc_hccr=%x\n", ISP_READ(isp, HCCR)); 3272 3273 3274 if (isp->isp_type & ISP_HA_SCSI) { 3275 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 3276 PRINTF(" cdma_conf=%x cdma_sts=%x cdma_fifostat=%x\n", 3277 ISP_READ(isp, CDMA_CONF), ISP_READ(isp, CDMA_STATUS), 3278 ISP_READ(isp, CDMA_FIFO_STS)); 3279 PRINTF(" ddma_conf=%x ddma_sts=%x ddma_fifostat=%x\n", 3280 ISP_READ(isp, DDMA_CONF), ISP_READ(isp, DDMA_STATUS), 3281 ISP_READ(isp, DDMA_FIFO_STS)); 3282 PRINTF(" sxp_int=%x sxp_gross=%x sxp(scsi_ctrl)=%x\n", 3283 ISP_READ(isp, SXP_INTERRUPT), 3284 ISP_READ(isp, SXP_GROSS_ERR), 3285 ISP_READ(isp, SXP_PINS_CONTROL)); 3286 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); 3287 } 3288 PRINTF(" mbox regs: %x %x %x %x %x\n", 3289 ISP_READ(isp, OUTMAILBOX0), ISP_READ(isp, OUTMAILBOX1), 3290 ISP_READ(isp, OUTMAILBOX2), ISP_READ(isp, OUTMAILBOX3), 3291 ISP_READ(isp, OUTMAILBOX4)); 3292 ISP_DUMPREGS(isp); 3293 } 3294 3295 static void 3296 isp_dumpxflist(isp) 3297 struct ispsoftc *isp; 3298 { 3299 volatile ISP_SCSI_XFER_T *xs; 3300 int i, hdp; 3301 3302 for (hdp = i = 0; i < RQUEST_QUEUE_LEN; i++) { 3303 xs = isp->isp_xflist[i]; 3304 if (xs == NULL) { 3305 continue; 3306 } 3307 if (hdp == 0) { 3308 PRINTF("%s: active requests\n", isp->isp_name); 3309 hdp++; 3310 } 3311 PRINTF(" Active Handle %d: tgt %d lun %d dlen %d\n", 3312 i+1, XS_TGT(xs), XS_LUN(xs), XS_XFRLEN(xs)); 3313 } 3314 } 3315 3316 static void 3317 isp_fw_state(isp) 3318 struct ispsoftc *isp; 3319 { 3320 mbreg_t mbs; 3321 if (isp->isp_type & ISP_HA_FC) { 3322 int once = 0; 3323 fcparam *fcp = isp->isp_param; 3324 again: 3325 mbs.param[0] = MBOX_GET_FW_STATE; 3326 isp_mboxcmd(isp, &mbs); 3327 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3328 switch (mbs.param[0]) { 3329 case ASYNC_PDB_CHANGED: 3330 isp_mark_getpdb_all(isp); 3331 /* FALL THROUGH */ 3332 case ASYNC_LIP_OCCURRED: 3333 case ASYNC_LOOP_UP: 3334 case ASYNC_LOOP_DOWN: 3335 case ASYNC_LOOP_RESET: 3336 case ASYNC_CHANGE_NOTIFY: 3337 if (once++ < 2) { 3338 goto again; 3339 } 3340 break; 3341 } 3342 isp_dumpregs(isp, "GET FIRMWARE STATE failed"); 3343 return; 3344 } 3345 fcp->isp_fwstate = mbs.param[1]; 3346 } 3347 } 3348 3349 static void 3350 isp_update(isp) 3351 struct ispsoftc *isp; 3352 { 3353 int tgt; 3354 mbreg_t mbs; 3355 sdparam *sdp; 3356 3357 isp->isp_update = 0; 3358 3359 if (isp->isp_type & ISP_HA_FC) { 3360 return; 3361 } 3362 3363 sdp = isp->isp_param; 3364 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 3365 u_int16_t flags, period, offset, changed; 3366 int get; 3367 3368 if (sdp->isp_devparam[tgt].dev_enable == 0) { 3369 continue; 3370 } 3371 3372 /* 3373 * If the goal is to update the status of the device, 3374 * take what's in dev_flags and try and set the device 3375 * toward that. Otherwise, if we're just refreshing the 3376 * current device state, get the current parameters. 3377 */ 3378 if (sdp->isp_devparam[tgt].dev_update) { 3379 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 3380 mbs.param[2] = sdp->isp_devparam[tgt].dev_flags; 3381 mbs.param[3] = 3382 (sdp->isp_devparam[tgt].sync_offset << 8) | 3383 (sdp->isp_devparam[tgt].sync_period); 3384 sdp->isp_devparam[tgt].dev_update = 0; 3385 /* 3386 * A command completion later that has 3387 * RQSTF_NEGOTIATION set will cause 3388 * the dev_refresh/announce cycle. 3389 * 3390 * Note: It is really important to update our current 3391 * flags with at least the state of TAG capabilities- 3392 * otherwise we might try and send a tagged command 3393 * when we have it all turned off. So change it here 3394 * to say that current already matches goal. 3395 */ 3396 sdp->isp_devparam[tgt].cur_dflags &= ~DPARM_TQING; 3397 sdp->isp_devparam[tgt].cur_dflags |= 3398 (sdp->isp_devparam[tgt].dev_flags & DPARM_TQING); 3399 get = 0; 3400 } else if (sdp->isp_devparam[tgt].dev_refresh) { 3401 mbs.param[0] = MBOX_GET_TARGET_PARAMS; 3402 sdp->isp_devparam[tgt].dev_refresh = 0; 3403 get = 1; 3404 } else { 3405 continue; 3406 } 3407 mbs.param[1] = tgt << 8; 3408 isp_mboxcmd(isp, &mbs); 3409 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3410 PRINTF("%s: failed to %cet SCSI parameters for " 3411 "target %d\n", isp->isp_name, (get)? 'g' : 's', 3412 tgt); 3413 continue; 3414 } 3415 3416 if (get == 0) { 3417 /* 3418 * XXX: Need a SYNC_TARGET for efficiency... 3419 */ 3420 isp->isp_sendmarker = 1; 3421 continue; 3422 } 3423 flags = mbs.param[2]; 3424 period = mbs.param[3] & 0xff; 3425 offset = mbs.param[3] >> 8; 3426 if (sdp->isp_devparam[tgt].cur_dflags != flags || 3427 sdp->isp_devparam[tgt].cur_period != period || 3428 sdp->isp_devparam[tgt].cur_offset != offset) { 3429 IDPRINTF(3, ("%s: tgt %d flags 0x%x period %d " 3430 "off %d\n", isp->isp_name, tgt, flags, 3431 period, offset)); 3432 changed = 1; 3433 } else { 3434 changed = 0; 3435 } 3436 sdp->isp_devparam[tgt].cur_dflags = flags; 3437 sdp->isp_devparam[tgt].cur_period = period; 3438 sdp->isp_devparam[tgt].cur_offset = offset; 3439 if (sdp->isp_devparam[tgt].dev_announced == 0 || changed) { 3440 if (isp_async(isp, ISPASYNC_NEW_TGT_PARAMS, &tgt)) 3441 sdp->isp_devparam[tgt].dev_announced = 0; 3442 else 3443 sdp->isp_devparam[tgt].dev_announced = 1; 3444 } 3445 } 3446 } 3447 3448 static void 3449 isp_setdfltparm(isp) 3450 struct ispsoftc *isp; 3451 { 3452 int tgt; 3453 mbreg_t mbs; 3454 sdparam *sdp; 3455 3456 /* 3457 * Been there, done that, got the T-shirt... 3458 */ 3459 if (isp->isp_gotdparms) { 3460 IDPRINTF(3, ("%s: already have dparms\n", isp->isp_name)); 3461 return; 3462 } 3463 isp->isp_gotdparms = 1; 3464 3465 /* 3466 * If we've not been told to avoid reading NVRAM, try and read it. 3467 * If we're successful reading it, we can return since NVRAM will 3468 * tell us the right thing to do. Otherwise, establish some reasonable 3469 * defaults. 3470 */ 3471 3472 if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) { 3473 if (isp_read_nvram(isp) == 0) { 3474 return; 3475 } 3476 } 3477 if (IS_FC(isp)) { 3478 fcparam *fcp = (fcparam *) isp->isp_param; 3479 fcp->isp_maxfrmlen = ICB_DFLT_FRMLEN; 3480 fcp->isp_maxalloc = 256; 3481 fcp->isp_execthrottle = 16; 3482 fcp->isp_retry_delay = 5; 3483 fcp->isp_retry_count = 0; 3484 /* 3485 * It would be nice to fake up a WWN in case we don't 3486 * get one out of NVRAM. Solaris does this for SOCAL 3487 * cards that don't have SBus properties- it sets up 3488 * a WWN based upon the system MAC Address. 3489 */ 3490 fcp->isp_wwn = 0; 3491 return; 3492 } 3493 3494 sdp = (sdparam *) isp->isp_param; 3495 mbs.param[0] = MBOX_GET_ACT_NEG_STATE; 3496 isp_mboxcmd(isp, &mbs); 3497 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3498 IDPRINTF(2, ("could not GET ACT NEG STATE\n")); 3499 sdp->isp_req_ack_active_neg = 1; 3500 sdp->isp_data_line_active_neg = 1; 3501 } else { 3502 sdp->isp_req_ack_active_neg = (mbs.param[1] >> 4) & 0x1; 3503 sdp->isp_data_line_active_neg = (mbs.param[1] >> 5) & 0x1; 3504 } 3505 3506 /* 3507 * The trick here is to establish a default for the default (honk!) 3508 * state (dev_flags). Then try and get the current status from 3509 * the card to fill in the current state. We don't, in fact, set 3510 * the default to the SAFE default state- that's not the goal state. 3511 */ 3512 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 3513 sdp->isp_devparam[tgt].cur_offset = 0; 3514 sdp->isp_devparam[tgt].cur_period = 0; 3515 sdp->isp_devparam[tgt].dev_flags = DPARM_DEFAULT; 3516 sdp->isp_devparam[tgt].cur_dflags = 0; 3517 if (isp->isp_type < ISP_HA_SCSI_1040 || 3518 (sdp->isp_clock && sdp->isp_clock < 60)) { 3519 sdp->isp_devparam[tgt].sync_offset = 3520 ISP_10M_SYNCPARMS >> 8; 3521 sdp->isp_devparam[tgt].sync_period = 3522 ISP_10M_SYNCPARMS & 0xff; 3523 } else if (IS_1080(isp)) { 3524 sdp->isp_devparam[tgt].sync_offset = 3525 ISP_40M_SYNCPARMS >> 8; 3526 sdp->isp_devparam[tgt].sync_period = 3527 ISP_40M_SYNCPARMS & 0xff; 3528 } else { 3529 sdp->isp_devparam[tgt].sync_offset = 3530 ISP_20M_SYNCPARMS >> 8; 3531 sdp->isp_devparam[tgt].sync_period = 3532 ISP_20M_SYNCPARMS & 0xff; 3533 } 3534 3535 /* 3536 * Don't get current target parameters if we've been 3537 * told not to use NVRAM- it's really the same thing. 3538 */ 3539 if (isp->isp_confopts & ISP_CFG_NONVRAM) { 3540 continue; 3541 } 3542 3543 mbs.param[0] = MBOX_GET_TARGET_PARAMS; 3544 mbs.param[1] = tgt << 8; 3545 isp_mboxcmd(isp, &mbs); 3546 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3547 continue; 3548 } 3549 sdp->isp_devparam[tgt].cur_dflags = mbs.param[2]; 3550 sdp->isp_devparam[tgt].dev_flags = mbs.param[2]; 3551 sdp->isp_devparam[tgt].cur_period = mbs.param[3] & 0xff; 3552 sdp->isp_devparam[tgt].cur_offset = mbs.param[3] >> 8; 3553 3554 /* 3555 * The maximum period we can really see 3556 * here is 100 (decimal), or 400 ns. 3557 * For some unknown reason we sometimes 3558 * get back wildass numbers from the 3559 * boot device's parameters (alpha only). 3560 */ 3561 if ((mbs.param[3] & 0xff) <= 0x64) { 3562 sdp->isp_devparam[tgt].sync_period = 3563 mbs.param[3] & 0xff; 3564 sdp->isp_devparam[tgt].sync_offset = 3565 mbs.param[3] >> 8; 3566 } 3567 3568 /* 3569 * It is not safe to run Ultra Mode with a clock < 60. 3570 */ 3571 if (((sdp->isp_clock && sdp->isp_clock < 60) || 3572 (isp->isp_type < ISP_HA_SCSI_1020A)) && 3573 (sdp->isp_devparam[tgt].sync_period <= 3574 (ISP_20M_SYNCPARMS & 0xff))) { 3575 sdp->isp_devparam[tgt].sync_offset = 3576 ISP_10M_SYNCPARMS >> 8; 3577 sdp->isp_devparam[tgt].sync_period = 3578 ISP_10M_SYNCPARMS & 0xff; 3579 } 3580 } 3581 3582 /* 3583 * Set Default Host Adapter Parameters 3584 */ 3585 sdp->isp_cmd_dma_burst_enable = 1; 3586 sdp->isp_data_dma_burst_enabl = 1; 3587 sdp->isp_fifo_threshold = 0; 3588 sdp->isp_initiator_id = 7; 3589 if (isp->isp_type >= ISP_HA_SCSI_1040) { 3590 sdp->isp_async_data_setup = 9; 3591 } else { 3592 sdp->isp_async_data_setup = 6; 3593 } 3594 sdp->isp_selection_timeout = 250; 3595 sdp->isp_max_queue_depth = 128; 3596 sdp->isp_tag_aging = 8; 3597 sdp->isp_bus_reset_delay = 3; 3598 sdp->isp_retry_count = 0; 3599 sdp->isp_retry_delay = 1; 3600 3601 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 3602 sdp->isp_devparam[tgt].exc_throttle = 16; 3603 sdp->isp_devparam[tgt].dev_enable = 1; 3604 } 3605 } 3606 3607 /* 3608 * Re-initialize the ISP and complete all orphaned commands 3609 * with a 'botched' notice. 3610 * 3611 * Locks held prior to coming here. 3612 */ 3613 3614 void 3615 isp_restart(isp) 3616 struct ispsoftc *isp; 3617 { 3618 ISP_SCSI_XFER_T *tlist[RQUEST_QUEUE_LEN], *xs; 3619 int i; 3620 3621 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 3622 tlist[i] = (ISP_SCSI_XFER_T *) isp->isp_xflist[i]; 3623 isp->isp_xflist[i] = NULL; 3624 } 3625 isp_reset(isp); 3626 if (isp->isp_state == ISP_RESETSTATE) { 3627 isp_init(isp); 3628 if (isp->isp_state == ISP_INITSTATE) { 3629 isp->isp_state = ISP_RUNSTATE; 3630 } 3631 } 3632 if (isp->isp_state != ISP_RUNSTATE) { 3633 PRINTF("%s: isp_restart cannot restart ISP\n", isp->isp_name); 3634 } 3635 3636 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 3637 xs = tlist[i]; 3638 if (XS_NULL(xs)) { 3639 continue; 3640 } 3641 if (isp->isp_nactive > 0) 3642 isp->isp_nactive--; 3643 XS_RESID(xs) = XS_XFRLEN(xs); 3644 XS_SETERR(xs, HBA_BUSRESET); 3645 XS_CMD_DONE(xs); 3646 } 3647 } 3648 3649 /* 3650 * NVRAM Routines 3651 */ 3652 3653 static int 3654 isp_read_nvram(isp) 3655 struct ispsoftc *isp; 3656 { 3657 int i, amt; 3658 u_int8_t csum, minversion; 3659 union { 3660 u_int8_t _x[ISP2100_NVRAM_SIZE]; 3661 u_int16_t _s[ISP2100_NVRAM_SIZE>>1]; 3662 } _n; 3663 #define nvram_data _n._x 3664 #define nvram_words _n._s 3665 3666 if (IS_FC(isp)) { 3667 amt = ISP2100_NVRAM_SIZE; 3668 minversion = 1; 3669 } else { 3670 amt = ISP_NVRAM_SIZE; 3671 minversion = 2; 3672 } 3673 3674 /* 3675 * Just read the first two words first to see if we have a valid 3676 * NVRAM to continue reading the rest with. 3677 */ 3678 for (i = 0; i < 2; i++) { 3679 isp_rdnvram_word(isp, i, &nvram_words[i]); 3680 } 3681 if (nvram_data[0] != 'I' || nvram_data[1] != 'S' || 3682 nvram_data[2] != 'P') { 3683 if (isp->isp_bustype != ISP_BT_SBUS) { 3684 PRINTF("%s: invalid NVRAM header\n", isp->isp_name); 3685 } 3686 return (-1); 3687 } 3688 for (i = 2; i < amt>>1; i++) { 3689 isp_rdnvram_word(isp, i, &nvram_words[i]); 3690 } 3691 for (csum = 0, i = 0; i < amt; i++) { 3692 csum += nvram_data[i]; 3693 } 3694 if (csum != 0) { 3695 PRINTF("%s: invalid NVRAM checksum\n", isp->isp_name); 3696 return (-1); 3697 } 3698 if (ISP_NVRAM_VERSION(nvram_data) < minversion) { 3699 PRINTF("%s: version %d NVRAM not understood\n", isp->isp_name, 3700 ISP_NVRAM_VERSION(nvram_data)); 3701 return (-1); 3702 } 3703 3704 if (isp->isp_type & ISP_HA_SCSI) { 3705 sdparam *sdp = (sdparam *) isp->isp_param; 3706 3707 sdp->isp_fifo_threshold = 3708 ISP_NVRAM_FIFO_THRESHOLD(nvram_data) | 3709 (ISP_NVRAM_FIFO_THRESHOLD_128(nvram_data) << 2); 3710 3711 sdp->isp_initiator_id = 3712 ISP_NVRAM_INITIATOR_ID(nvram_data); 3713 3714 sdp->isp_bus_reset_delay = 3715 ISP_NVRAM_BUS_RESET_DELAY(nvram_data); 3716 3717 sdp->isp_retry_count = 3718 ISP_NVRAM_BUS_RETRY_COUNT(nvram_data); 3719 3720 sdp->isp_retry_delay = 3721 ISP_NVRAM_BUS_RETRY_DELAY(nvram_data); 3722 3723 sdp->isp_async_data_setup = 3724 ISP_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data); 3725 3726 if (isp->isp_type >= ISP_HA_SCSI_1040) { 3727 if (sdp->isp_async_data_setup < 9) { 3728 sdp->isp_async_data_setup = 9; 3729 } 3730 } else { 3731 if (sdp->isp_async_data_setup != 6) { 3732 sdp->isp_async_data_setup = 6; 3733 } 3734 } 3735 3736 sdp->isp_req_ack_active_neg = 3737 ISP_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data); 3738 3739 sdp->isp_data_line_active_neg = 3740 ISP_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data); 3741 3742 sdp->isp_data_dma_burst_enabl = 3743 ISP_NVRAM_DATA_DMA_BURST_ENABLE(nvram_data); 3744 3745 sdp->isp_cmd_dma_burst_enable = 3746 ISP_NVRAM_CMD_DMA_BURST_ENABLE(nvram_data); 3747 3748 sdp->isp_tag_aging = 3749 ISP_NVRAM_TAG_AGE_LIMIT(nvram_data); 3750 3751 sdp->isp_selection_timeout = 3752 ISP_NVRAM_SELECTION_TIMEOUT(nvram_data); 3753 3754 sdp->isp_max_queue_depth = 3755 ISP_NVRAM_MAX_QUEUE_DEPTH(nvram_data); 3756 3757 sdp->isp_fast_mttr = ISP_NVRAM_FAST_MTTR_ENABLE(nvram_data); 3758 if (isp->isp_dblev > 2) { 3759 static char *true = "true"; 3760 static char *false = "false"; 3761 PRINTF("%s: NVRAM values:\n", isp->isp_name); 3762 PRINTF(" Fifo Threshold = 0x%x\n", 3763 sdp->isp_fifo_threshold); 3764 PRINTF(" Bus Reset Delay = %d\n", 3765 sdp->isp_bus_reset_delay); 3766 PRINTF(" Retry Count = %d\n", 3767 sdp->isp_retry_count); 3768 PRINTF(" Retry Delay = %d\n", 3769 sdp->isp_retry_delay); 3770 PRINTF(" Tag Age Limit = %d\n", 3771 sdp->isp_tag_aging); 3772 PRINTF(" Selection Timeout = %d\n", 3773 sdp->isp_selection_timeout); 3774 PRINTF(" Max Queue Depth = %d\n", 3775 sdp->isp_max_queue_depth); 3776 PRINTF(" Async Data Setup = 0x%x\n", 3777 sdp->isp_async_data_setup); 3778 PRINTF(" REQ/ACK Active Negation = %s\n", 3779 sdp->isp_req_ack_active_neg? true : false); 3780 PRINTF(" Data Line Active Negation = %s\n", 3781 sdp->isp_data_line_active_neg? true : false); 3782 PRINTF(" Data DMA Burst Enable = %s\n", 3783 sdp->isp_data_dma_burst_enabl? true : false); 3784 PRINTF(" Cmd DMA Burst Enable = %s\n", 3785 sdp->isp_cmd_dma_burst_enable? true : false); 3786 PRINTF(" Fast MTTR = %s\n", 3787 sdp->isp_fast_mttr? true : false); 3788 } 3789 for (i = 0; i < MAX_TARGETS; i++) { 3790 sdp->isp_devparam[i].dev_enable = 3791 ISP_NVRAM_TGT_DEVICE_ENABLE(nvram_data, i); 3792 sdp->isp_devparam[i].exc_throttle = 3793 ISP_NVRAM_TGT_EXEC_THROTTLE(nvram_data, i); 3794 sdp->isp_devparam[i].sync_offset = 3795 ISP_NVRAM_TGT_SYNC_OFFSET(nvram_data, i); 3796 sdp->isp_devparam[i].sync_period = 3797 ISP_NVRAM_TGT_SYNC_PERIOD(nvram_data, i); 3798 3799 if (isp->isp_type < ISP_HA_SCSI_1040) { 3800 /* 3801 * If we're not ultra, we can't possibly 3802 * be a shorter period than this. 3803 */ 3804 if (sdp->isp_devparam[i].sync_period < 0x19) { 3805 sdp->isp_devparam[i].sync_period = 3806 0x19; 3807 } 3808 if (sdp->isp_devparam[i].sync_offset > 0xc) { 3809 sdp->isp_devparam[i].sync_offset = 3810 0x0c; 3811 } 3812 } else { 3813 if (sdp->isp_devparam[i].sync_offset > 0x8) { 3814 sdp->isp_devparam[i].sync_offset = 0x8; 3815 } 3816 } 3817 sdp->isp_devparam[i].dev_flags = 0; 3818 if (ISP_NVRAM_TGT_RENEG(nvram_data, i)) 3819 sdp->isp_devparam[i].dev_flags |= DPARM_RENEG; 3820 if (ISP_NVRAM_TGT_QFRZ(nvram_data, i)) { 3821 PRINTF("%s: not supporting QFRZ option for " 3822 "target %d\n", isp->isp_name, i); 3823 } 3824 sdp->isp_devparam[i].dev_flags |= DPARM_ARQ; 3825 if (ISP_NVRAM_TGT_ARQ(nvram_data, i) == 0) { 3826 PRINTF("%s: not disabling ARQ option for " 3827 "target %d\n", isp->isp_name, i); 3828 } 3829 if (ISP_NVRAM_TGT_TQING(nvram_data, i)) 3830 sdp->isp_devparam[i].dev_flags |= DPARM_TQING; 3831 if (ISP_NVRAM_TGT_SYNC(nvram_data, i)) 3832 sdp->isp_devparam[i].dev_flags |= DPARM_SYNC; 3833 if (ISP_NVRAM_TGT_WIDE(nvram_data, i)) 3834 sdp->isp_devparam[i].dev_flags |= DPARM_WIDE; 3835 if (ISP_NVRAM_TGT_PARITY(nvram_data, i)) 3836 sdp->isp_devparam[i].dev_flags |= DPARM_PARITY; 3837 if (ISP_NVRAM_TGT_DISC(nvram_data, i)) 3838 sdp->isp_devparam[i].dev_flags |= DPARM_DISC; 3839 sdp->isp_devparam[i].cur_dflags = 0; /* we don't know */ 3840 if (isp->isp_dblev > 2) { 3841 PRINTF(" Target %d: Enabled %d Throttle %d " 3842 "Offset %d Period %d Flags 0x%x\n", i, 3843 sdp->isp_devparam[i].dev_enable, 3844 sdp->isp_devparam[i].exc_throttle, 3845 sdp->isp_devparam[i].sync_offset, 3846 sdp->isp_devparam[i].sync_period, 3847 sdp->isp_devparam[i].dev_flags); 3848 } 3849 } 3850 } else { 3851 fcparam *fcp = (fcparam *) isp->isp_param; 3852 union { 3853 struct { 3854 #if BYTE_ORDER == BIG_ENDIAN 3855 u_int32_t hi32; 3856 u_int32_t lo32; 3857 #else 3858 u_int32_t lo32; 3859 u_int32_t hi32; 3860 #endif 3861 } wds; 3862 u_int64_t full64; 3863 } wwnstore; 3864 3865 wwnstore.full64 = ISP2100_NVRAM_NODE_NAME(nvram_data); 3866 PRINTF("%s: Adapter WWN 0x%08x%08x\n", isp->isp_name, 3867 wwnstore.wds.hi32, wwnstore.wds.lo32); 3868 fcp->isp_wwn = wwnstore.full64; 3869 wwnstore.full64 = ISP2100_NVRAM_BOOT_NODE_NAME(nvram_data); 3870 if (wwnstore.full64 != 0) { 3871 PRINTF("%s: BOOT DEVICE WWN 0x%08x%08x\n", 3872 isp->isp_name, wwnstore.wds.hi32, 3873 wwnstore.wds.lo32); 3874 } 3875 fcp->isp_maxalloc = 3876 ISP2100_NVRAM_MAXIOCBALLOCATION(nvram_data); 3877 fcp->isp_maxfrmlen = 3878 ISP2100_NVRAM_MAXFRAMELENGTH(nvram_data); 3879 fcp->isp_retry_delay = 3880 ISP2100_NVRAM_RETRY_DELAY(nvram_data); 3881 fcp->isp_retry_count = 3882 ISP2100_NVRAM_RETRY_COUNT(nvram_data); 3883 fcp->isp_loopid = 3884 ISP2100_NVRAM_HARDLOOPID(nvram_data); 3885 fcp->isp_execthrottle = 3886 ISP2100_NVRAM_EXECUTION_THROTTLE(nvram_data); 3887 fcp->isp_fwoptions = ISP2100_NVRAM_OPTIONS(nvram_data); 3888 if (isp->isp_dblev > 2) { 3889 PRINTF("%s: NVRAM values:\n", isp->isp_name); 3890 PRINTF(" Max IOCB Allocation = %d\n", 3891 fcp->isp_maxalloc); 3892 PRINTF(" Max Frame Length = %d\n", 3893 fcp->isp_maxfrmlen); 3894 PRINTF(" Execution Throttle = %d\n", 3895 fcp->isp_execthrottle); 3896 PRINTF(" Retry Count = %d\n", 3897 fcp->isp_retry_count); 3898 PRINTF(" Retry Delay = %d\n", 3899 fcp->isp_retry_delay); 3900 PRINTF(" Hard Loop ID = %d\n", 3901 fcp->isp_loopid); 3902 PRINTF(" Options = 0x%x\n", 3903 fcp->isp_fwoptions); 3904 PRINTF(" HBA Options = 0x%x\n", 3905 ISP2100_NVRAM_HBA_OPTIONS(nvram_data)); 3906 } 3907 } 3908 IDPRINTF(3, ("%s: NVRAM is valid\n", isp->isp_name)); 3909 return (0); 3910 } 3911 3912 static void 3913 isp_rdnvram_word(isp, wo, rp) 3914 struct ispsoftc *isp; 3915 int wo; 3916 u_int16_t *rp; 3917 { 3918 int i, cbits; 3919 u_int16_t bit, rqst; 3920 3921 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT); 3922 SYS_DELAY(2); 3923 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK); 3924 SYS_DELAY(2); 3925 3926 if (isp->isp_type & ISP_HA_FC) { 3927 wo &= ((ISP2100_NVRAM_SIZE >> 1) - 1); 3928 rqst = (ISP_NVRAM_READ << 8) | wo; 3929 cbits = 10; 3930 } else { 3931 wo &= ((ISP_NVRAM_SIZE >> 1) - 1); 3932 rqst = (ISP_NVRAM_READ << 6) | wo; 3933 cbits = 8; 3934 } 3935 3936 /* 3937 * Clock the word select request out... 3938 */ 3939 for (i = cbits; i >= 0; i--) { 3940 if ((rqst >> i) & 1) { 3941 bit = BIU_NVRAM_SELECT | BIU_NVRAM_DATAOUT; 3942 } else { 3943 bit = BIU_NVRAM_SELECT; 3944 } 3945 ISP_WRITE(isp, BIU_NVRAM, bit); 3946 SYS_DELAY(2); 3947 ISP_WRITE(isp, BIU_NVRAM, bit | BIU_NVRAM_CLOCK); 3948 SYS_DELAY(2); 3949 ISP_WRITE(isp, BIU_NVRAM, bit); 3950 SYS_DELAY(2); 3951 } 3952 /* 3953 * Now read the result back in (bits come back in MSB format). 3954 */ 3955 *rp = 0; 3956 for (i = 0; i < 16; i++) { 3957 u_int16_t rv; 3958 *rp <<= 1; 3959 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK); 3960 SYS_DELAY(2); 3961 rv = ISP_READ(isp, BIU_NVRAM); 3962 if (rv & BIU_NVRAM_DATAIN) { 3963 *rp |= 1; 3964 } 3965 SYS_DELAY(2); 3966 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT); 3967 SYS_DELAY(2); 3968 } 3969 ISP_WRITE(isp, BIU_NVRAM, 0); 3970 SYS_DELAY(2); 3971 #if BYTE_ORDER == BIG_ENDIAN 3972 *rp = ((*rp >> 8) | ((*rp & 0xff) << 8)); 3973 #endif 3974 } 3975
Indexes created Wed Sep 24 05:09:52 GMT 2025