isp_target.c revision 1.9.2.2
1 1.9.2.2 bouyer /* $NetBSD: isp_target.c,v 1.9.2.2 2000/11/20 11:40:39 bouyer Exp $ */ 2 1.9.2.2 bouyer /* 3 1.9.2.2 bouyer * This driver, which is contained in NetBSD in the files: 4 1.9.2.2 bouyer * 5 1.9.2.2 bouyer * sys/dev/ic/isp.c 6 1.9.2.2 bouyer * sys/dev/ic/ic/isp.c 7 1.9.2.2 bouyer * sys/dev/ic/ic/isp_inline.h 8 1.9.2.2 bouyer * sys/dev/ic/ic/isp_netbsd.c 9 1.9.2.2 bouyer * sys/dev/ic/ic/isp_netbsd.h 10 1.9.2.2 bouyer * sys/dev/ic/ic/isp_target.c 11 1.9.2.2 bouyer * sys/dev/ic/ic/isp_target.h 12 1.9.2.2 bouyer * sys/dev/ic/ic/isp_tpublic.h 13 1.9.2.2 bouyer * sys/dev/ic/ic/ispmbox.h 14 1.9.2.2 bouyer * sys/dev/ic/ic/ispreg.h 15 1.9.2.2 bouyer * sys/dev/ic/ic/ispvar.h 16 1.9.2.2 bouyer * sys/microcode/isp/asm_sbus.h 17 1.9.2.2 bouyer * sys/microcode/isp/asm_1040.h 18 1.9.2.2 bouyer * sys/microcode/isp/asm_1080.h 19 1.9.2.2 bouyer * sys/microcode/isp/asm_12160.h 20 1.9.2.2 bouyer * sys/microcode/isp/asm_2100.h 21 1.9.2.2 bouyer * sys/microcode/isp/asm_2200.h 22 1.9.2.2 bouyer * sys/pci/isp_pci.c 23 1.9.2.2 bouyer * sys/sbus/isp_sbus.c 24 1.9.2.2 bouyer * 25 1.9.2.2 bouyer * Is being actively maintained by Matthew Jacob (mjacob (at) netbsd.org). 26 1.9.2.2 bouyer * This driver also is shared source with FreeBSD, OpenBSD, Linux, Solaris, 27 1.9.2.2 bouyer * Linux versions. This tends to be an interesting maintenance problem. 28 1.9.2.2 bouyer * 29 1.9.2.2 bouyer * Please coordinate with Matthew Jacob on changes you wish to make here. 30 1.9.2.2 bouyer */ 31 1.9.2.2 bouyer /* 32 1.9.2.2 bouyer * Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters. 33 1.9.2.2 bouyer * 34 1.9.2.2 bouyer * Copyright (c) 1999 by Matthew Jacob 35 1.9.2.2 bouyer * All rights reserved. 36 1.9.2.2 bouyer * mjacob (at) feral.com 37 1.9.2.2 bouyer * 38 1.9.2.2 bouyer * Redistribution and use in source and binary forms, with or without 39 1.9.2.2 bouyer * modification, are permitted provided that the following conditions 40 1.9.2.2 bouyer * are met: 41 1.9.2.2 bouyer * 1. Redistributions of source code must retain the above copyright 42 1.9.2.2 bouyer * notice immediately at the beginning of the file, without modification, 43 1.9.2.2 bouyer * this list of conditions, and the following disclaimer. 44 1.9.2.2 bouyer * 2. Redistributions in binary form must reproduce the above copyright 45 1.9.2.2 bouyer * notice, this list of conditions and the following disclaimer in the 46 1.9.2.2 bouyer * documentation and/or other materials provided with the distribution. 47 1.9.2.2 bouyer * 3. The name of the author may not be used to endorse or promote products 48 1.9.2.2 bouyer * derived from this software without specific prior written permission. 49 1.9.2.2 bouyer * 50 1.9.2.2 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 51 1.9.2.2 bouyer * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 52 1.9.2.2 bouyer * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 53 1.9.2.2 bouyer * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 54 1.9.2.2 bouyer * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 55 1.9.2.2 bouyer * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 56 1.9.2.2 bouyer * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 57 1.9.2.2 bouyer * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 58 1.9.2.2 bouyer * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 59 1.9.2.2 bouyer * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 60 1.9.2.2 bouyer * SUCH DAMAGE. 61 1.9.2.2 bouyer */ 62 1.9.2.2 bouyer 63 1.9.2.2 bouyer /* 64 1.9.2.2 bouyer * Include header file appropriate for platform we're building on. 65 1.9.2.2 bouyer */ 66 1.9.2.2 bouyer 67 1.9.2.2 bouyer #ifdef __NetBSD__ 68 1.9.2.2 bouyer #include <dev/ic/isp_netbsd.h> 69 1.9.2.2 bouyer #endif 70 1.9.2.2 bouyer #ifdef __FreeBSD__ 71 1.9.2.2 bouyer #include <dev/isp/isp_freebsd.h> 72 1.9.2.2 bouyer #endif 73 1.9.2.2 bouyer #ifdef __OpenBSD__ 74 1.9.2.2 bouyer #include <dev/ic/isp_openbsd.h> 75 1.9.2.2 bouyer #endif 76 1.9.2.2 bouyer #ifdef __linux__ 77 1.9.2.2 bouyer #include "isp_linux.h" 78 1.9.2.2 bouyer #endif 79 1.9.2.2 bouyer 80 1.9.2.2 bouyer #ifdef ISP_TARGET_MODE 81 1.9.2.2 bouyer static char *atiocope = 82 1.9.2.2 bouyer "ATIO returned for lun %d because it was in the middle of Bus Device Reset"; 83 1.9.2.2 bouyer static char *atior = 84 1.9.2.2 bouyer "ATIO returned for lun %d from initiator %d because a Bus Reset occurred"; 85 1.9.2.2 bouyer 86 1.9.2.2 bouyer static void isp_got_msg __P((struct ispsoftc *, int, in_entry_t *)); 87 1.9.2.2 bouyer static void isp_got_msg_fc __P((struct ispsoftc *, int, in_fcentry_t *)); 88 1.9.2.2 bouyer static void isp_notify_ack __P((struct ispsoftc *, void *)); 89 1.9.2.2 bouyer static void isp_handle_atio(struct ispsoftc *, at_entry_t *); 90 1.9.2.2 bouyer static void isp_handle_atio2(struct ispsoftc *, at2_entry_t *); 91 1.9.2.2 bouyer static void isp_handle_ctio(struct ispsoftc *, ct_entry_t *); 92 1.9.2.2 bouyer static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *); 93 1.9.2.2 bouyer 94 1.9.2.2 bouyer /* 95 1.9.2.2 bouyer * The Qlogic driver gets an interrupt to look at response queue entries. 96 1.9.2.2 bouyer * Some of these are status completions for initiatior mode commands, but 97 1.9.2.2 bouyer * if target mode is enabled, we get a whole wad of response queue entries 98 1.9.2.2 bouyer * to be handled here. 99 1.9.2.2 bouyer * 100 1.9.2.2 bouyer * Basically the split into 3 main groups: Lun Enable/Modification responses, 101 1.9.2.2 bouyer * SCSI Command processing, and Immediate Notification events. 102 1.9.2.2 bouyer * 103 1.9.2.2 bouyer * You start by writing a request queue entry to enable target mode (and 104 1.9.2.2 bouyer * establish some resource limitations which you can modify later). 105 1.9.2.2 bouyer * The f/w responds with a LUN ENABLE or LUN MODIFY response with 106 1.9.2.2 bouyer * the status of this action. If the enable was successful, you can expect... 107 1.9.2.2 bouyer * 108 1.9.2.2 bouyer * Response queue entries with SCSI commands encapsulate show up in an ATIO 109 1.9.2.2 bouyer * (Accept Target IO) type- sometimes with enough info to stop the command at 110 1.9.2.2 bouyer * this level. Ultimately the driver has to feed back to the f/w's request 111 1.9.2.2 bouyer * queue a sequence of CTIOs (continue target I/O) that describe data to 112 1.9.2.2 bouyer * be moved and/or status to be sent) and finally finishing with sending 113 1.9.2.2 bouyer * to the f/w's response queue an ATIO which then completes the handshake 114 1.9.2.2 bouyer * with the f/w for that command. There's a lot of variations on this theme, 115 1.9.2.2 bouyer * including flags you can set in the CTIO for the Qlogic 2X00 fibre channel 116 1.9.2.2 bouyer * cards that 'auto-replenish' the f/w's ATIO count, but this is the basic 117 1.9.2.2 bouyer * gist of it. 118 1.9.2.2 bouyer * 119 1.9.2.2 bouyer * The third group that can show up in the response queue are Immediate 120 1.9.2.2 bouyer * Notification events. These include things like notifications of SCSI bus 121 1.9.2.2 bouyer * resets, or Bus Device Reset messages or other messages received. This 122 1.9.2.2 bouyer * a classic oddbins area. It can get a little wierd because you then turn 123 1.9.2.2 bouyer * around and acknowledge the Immediate Notify by writing an entry onto the 124 1.9.2.2 bouyer * request queue and then the f/w turns around and gives you an acknowledgement 125 1.9.2.2 bouyer * to *your* acknowledgement on the response queue (the idea being to let 126 1.9.2.2 bouyer * the f/w tell you when the event is *really* over I guess). 127 1.9.2.2 bouyer * 128 1.9.2.2 bouyer */ 129 1.9.2.2 bouyer 130 1.9.2.2 bouyer 131 1.9.2.2 bouyer /* 132 1.9.2.2 bouyer * A new response queue entry has arrived. The interrupt service code 133 1.9.2.2 bouyer * has already swizzled it into the platform dependent from canonical form. 134 1.9.2.2 bouyer * 135 1.9.2.2 bouyer * Because of the way this driver is designed, unfortunately most of the 136 1.9.2.2 bouyer * actual synchronization work has to be done in the platform specific 137 1.9.2.2 bouyer * code- we have no synchroniation primitives in the common code. 138 1.9.2.2 bouyer */ 139 1.9.2.2 bouyer 140 1.9.2.2 bouyer int 141 1.9.2.2 bouyer isp_target_notify(isp, vptr, optrp) 142 1.9.2.2 bouyer struct ispsoftc *isp; 143 1.9.2.2 bouyer void *vptr; 144 1.9.2.2 bouyer u_int16_t *optrp; 145 1.9.2.2 bouyer { 146 1.9.2.2 bouyer u_int16_t status, seqid; 147 1.9.2.2 bouyer union { 148 1.9.2.2 bouyer at_entry_t *atiop; 149 1.9.2.2 bouyer at2_entry_t *at2iop; 150 1.9.2.2 bouyer ct_entry_t *ctiop; 151 1.9.2.2 bouyer ct2_entry_t *ct2iop; 152 1.9.2.2 bouyer lun_entry_t *lunenp; 153 1.9.2.2 bouyer in_entry_t *inotp; 154 1.9.2.2 bouyer in_fcentry_t *inot_fcp; 155 1.9.2.2 bouyer na_entry_t *nackp; 156 1.9.2.2 bouyer na_fcentry_t *nack_fcp; 157 1.9.2.2 bouyer isphdr_t *hp; 158 1.9.2.2 bouyer void * *vp; 159 1.9.2.2 bouyer #define atiop unp.atiop 160 1.9.2.2 bouyer #define at2iop unp.at2iop 161 1.9.2.2 bouyer #define ctiop unp.ctiop 162 1.9.2.2 bouyer #define ct2iop unp.ct2iop 163 1.9.2.2 bouyer #define lunenp unp.lunenp 164 1.9.2.2 bouyer #define inotp unp.inotp 165 1.9.2.2 bouyer #define inot_fcp unp.inot_fcp 166 1.9.2.2 bouyer #define nackp unp.nackp 167 1.9.2.2 bouyer #define nack_fcp unp.nack_fcp 168 1.9.2.2 bouyer #define hdrp unp.hp 169 1.9.2.2 bouyer } unp; 170 1.9.2.2 bouyer int bus, rval = 0; 171 1.9.2.2 bouyer 172 1.9.2.2 bouyer unp.vp = vptr; 173 1.9.2.2 bouyer 174 1.9.2.2 bouyer ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr); 175 1.9.2.2 bouyer 176 1.9.2.2 bouyer switch(hdrp->rqs_entry_type) { 177 1.9.2.2 bouyer case RQSTYPE_ATIO: 178 1.9.2.2 bouyer isp_handle_atio(isp, atiop); 179 1.9.2.2 bouyer break; 180 1.9.2.2 bouyer case RQSTYPE_CTIO: 181 1.9.2.2 bouyer isp_handle_ctio(isp, ctiop); 182 1.9.2.2 bouyer break; 183 1.9.2.2 bouyer case RQSTYPE_ATIO2: 184 1.9.2.2 bouyer isp_handle_atio2(isp, at2iop); 185 1.9.2.2 bouyer break; 186 1.9.2.2 bouyer case RQSTYPE_CTIO2: 187 1.9.2.2 bouyer isp_handle_ctio2(isp, ct2iop); 188 1.9.2.2 bouyer break; 189 1.9.2.2 bouyer case RQSTYPE_ENABLE_LUN: 190 1.9.2.2 bouyer case RQSTYPE_MODIFY_LUN: 191 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_ACTION, vptr); 192 1.9.2.2 bouyer break; 193 1.9.2.2 bouyer 194 1.9.2.2 bouyer case RQSTYPE_NOTIFY: 195 1.9.2.2 bouyer /* 196 1.9.2.2 bouyer * Either the ISP received a SCSI message it can't 197 1.9.2.2 bouyer * handle, or it's returning an Immed. Notify entry 198 1.9.2.2 bouyer * we sent. We can send Immed. Notify entries to 199 1.9.2.2 bouyer * increment the firmware's resource count for them 200 1.9.2.2 bouyer * (we set this initially in the Enable Lun entry). 201 1.9.2.2 bouyer */ 202 1.9.2.2 bouyer bus = 0; 203 1.9.2.2 bouyer if (IS_FC(isp)) { 204 1.9.2.2 bouyer status = inot_fcp->in_status; 205 1.9.2.2 bouyer seqid = inot_fcp->in_seqid; 206 1.9.2.2 bouyer } else { 207 1.9.2.2 bouyer status = inotp->in_status & 0xff; 208 1.9.2.2 bouyer seqid = inotp->in_seqid; 209 1.9.2.2 bouyer if (IS_DUALBUS(isp)) { 210 1.9.2.2 bouyer bus = (inotp->in_iid & 0x80) >> 7; 211 1.9.2.2 bouyer inotp->in_iid &= ~0x80; 212 1.9.2.2 bouyer } 213 1.9.2.2 bouyer } 214 1.9.2.2 bouyer isp_prt(isp, ISP_LOGTDEBUG1, 215 1.9.2.2 bouyer "Immediate Notify, status=0x%x seqid=0x%x", status, seqid); 216 1.9.2.2 bouyer switch (status) { 217 1.9.2.2 bouyer case IN_RESET: 218 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_BUS_RESET, &bus); 219 1.9.2.2 bouyer break; 220 1.9.2.2 bouyer case IN_MSG_RECEIVED: 221 1.9.2.2 bouyer case IN_IDE_RECEIVED: 222 1.9.2.2 bouyer if (IS_FC(isp)) { 223 1.9.2.2 bouyer isp_got_msg_fc(isp, bus, vptr); 224 1.9.2.2 bouyer } else { 225 1.9.2.2 bouyer isp_got_msg(isp, bus, vptr); 226 1.9.2.2 bouyer } 227 1.9.2.2 bouyer break; 228 1.9.2.2 bouyer case IN_RSRC_UNAVAIL: 229 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, "Firmware out of ATIOs"); 230 1.9.2.2 bouyer break; 231 1.9.2.2 bouyer case IN_ABORT_TASK: 232 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, 233 1.9.2.2 bouyer "Abort Task for Initiator %d RX_ID 0x%x", 234 1.9.2.2 bouyer inot_fcp->in_iid, seqid); 235 1.9.2.2 bouyer break; 236 1.9.2.2 bouyer case IN_PORT_LOGOUT: 237 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, 238 1.9.2.2 bouyer "Port Logout for Initiator %d RX_ID 0x%x", 239 1.9.2.2 bouyer inot_fcp->in_iid, seqid); 240 1.9.2.2 bouyer break; 241 1.9.2.2 bouyer case IN_PORT_CHANGED: 242 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, 243 1.9.2.2 bouyer "Port Changed for Initiator %d RX_ID 0x%x", 244 1.9.2.2 bouyer inot_fcp->in_iid, seqid); 245 1.9.2.2 bouyer break; 246 1.9.2.2 bouyer case IN_GLOBAL_LOGO: 247 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, "All ports logged out"); 248 1.9.2.2 bouyer break; 249 1.9.2.2 bouyer default: 250 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 251 1.9.2.2 bouyer "bad status (0x%x) in isp_target_notify", status); 252 1.9.2.2 bouyer break; 253 1.9.2.2 bouyer } 254 1.9.2.2 bouyer isp_notify_ack(isp, vptr); 255 1.9.2.2 bouyer break; 256 1.9.2.2 bouyer 257 1.9.2.2 bouyer case RQSTYPE_NOTIFY_ACK: 258 1.9.2.2 bouyer /* 259 1.9.2.2 bouyer * The ISP is acknowledging our acknowledgement of an 260 1.9.2.2 bouyer * Immediate Notify entry for some asynchronous event. 261 1.9.2.2 bouyer */ 262 1.9.2.2 bouyer if (IS_FC(isp)) { 263 1.9.2.2 bouyer isp_prt(isp, ISP_LOGTDEBUG1, 264 1.9.2.2 bouyer "Notify Ack status=0x%x seqid 0x%x", 265 1.9.2.2 bouyer nack_fcp->na_status, nack_fcp->na_seqid); 266 1.9.2.2 bouyer } else { 267 1.9.2.2 bouyer isp_prt(isp, ISP_LOGTDEBUG1, 268 1.9.2.2 bouyer "Notify Ack event 0x%x status=0x%x seqid 0x%x", 269 1.9.2.2 bouyer nackp->na_event, nackp->na_status, nackp->na_seqid); 270 1.9.2.2 bouyer } 271 1.9.2.2 bouyer break; 272 1.9.2.2 bouyer default: 273 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 274 1.9.2.2 bouyer "Unknown entry type 0x%x in isp_target_notify", 275 1.9.2.2 bouyer hdrp->rqs_entry_type); 276 1.9.2.2 bouyer rval = -1; 277 1.9.2.2 bouyer break; 278 1.9.2.2 bouyer } 279 1.9.2.2 bouyer #undef atiop 280 1.9.2.2 bouyer #undef at2iop 281 1.9.2.2 bouyer #undef ctiop 282 1.9.2.2 bouyer #undef ct2iop 283 1.9.2.2 bouyer #undef lunenp 284 1.9.2.2 bouyer #undef inotp 285 1.9.2.2 bouyer #undef inot_fcp 286 1.9.2.2 bouyer #undef nackp 287 1.9.2.2 bouyer #undef nack_fcp 288 1.9.2.2 bouyer #undef hdrp 289 1.9.2.2 bouyer return (rval); 290 1.9.2.2 bouyer } 291 1.9.2.2 bouyer 292 1.9.2.2 bouyer 293 1.9.2.2 bouyer /* 294 1.9.2.2 bouyer * Toggle (on/off) target mode for bus/target/lun 295 1.9.2.2 bouyer * 296 1.9.2.2 bouyer * The caller has checked for overlap and legality. 297 1.9.2.2 bouyer * 298 1.9.2.2 bouyer * Note that not all of bus, target or lun can be paid attention to. 299 1.9.2.2 bouyer * Note also that this action will not be complete until the f/w writes 300 1.9.2.2 bouyer * response entry. The caller is responsible for synchronizing this. 301 1.9.2.2 bouyer */ 302 1.9.2.2 bouyer int 303 1.9.2.2 bouyer isp_lun_cmd(isp, cmd, bus, tgt, lun, opaque) 304 1.9.2.2 bouyer struct ispsoftc *isp; 305 1.9.2.2 bouyer int cmd; 306 1.9.2.2 bouyer int bus; 307 1.9.2.2 bouyer int tgt; 308 1.9.2.2 bouyer int lun; 309 1.9.2.2 bouyer u_int32_t opaque; 310 1.9.2.2 bouyer { 311 1.9.2.2 bouyer lun_entry_t el; 312 1.9.2.2 bouyer u_int16_t iptr, optr; 313 1.9.2.2 bouyer void *outp; 314 1.9.2.2 bouyer 315 1.9.2.2 bouyer 316 1.9.2.2 bouyer MEMZERO(&el, sizeof (el)); 317 1.9.2.2 bouyer if (IS_DUALBUS(isp)) { 318 1.9.2.2 bouyer el.le_rsvd = (bus & 0x1) << 7; 319 1.9.2.2 bouyer } 320 1.9.2.2 bouyer el.le_cmd_count = DFLT_CMD_CNT; 321 1.9.2.2 bouyer el.le_in_count = DFLT_INOTIFY; 322 1.9.2.2 bouyer if (cmd == RQSTYPE_ENABLE_LUN) { 323 1.9.2.2 bouyer if (IS_SCSI(isp)) { 324 1.9.2.2 bouyer el.le_flags = LUN_TQAE|LUN_DISAD; 325 1.9.2.2 bouyer el.le_cdb6len = 12; 326 1.9.2.2 bouyer el.le_cdb7len = 12; 327 1.9.2.2 bouyer } 328 1.9.2.2 bouyer } else if (cmd == -RQSTYPE_ENABLE_LUN) { 329 1.9.2.2 bouyer cmd = RQSTYPE_ENABLE_LUN; 330 1.9.2.2 bouyer el.le_cmd_count = 0; 331 1.9.2.2 bouyer el.le_in_count = 0; 332 1.9.2.2 bouyer } else if (cmd == -RQSTYPE_MODIFY_LUN) { 333 1.9.2.2 bouyer cmd = RQSTYPE_MODIFY_LUN; 334 1.9.2.2 bouyer el.le_ops = LUN_CCDECR | LUN_INDECR; 335 1.9.2.2 bouyer } else { 336 1.9.2.2 bouyer el.le_ops = LUN_CCINCR | LUN_ININCR; 337 1.9.2.2 bouyer } 338 1.9.2.2 bouyer el.le_header.rqs_entry_type = cmd; 339 1.9.2.2 bouyer el.le_header.rqs_entry_count = 1; 340 1.9.2.2 bouyer el.le_reserved = opaque; 341 1.9.2.2 bouyer if (IS_SCSI(isp)) { 342 1.9.2.2 bouyer el.le_tgt = tgt; 343 1.9.2.2 bouyer el.le_lun = lun; 344 1.9.2.2 bouyer } else if (isp->isp_maxluns <= 16) { 345 1.9.2.2 bouyer el.le_lun = lun; 346 1.9.2.2 bouyer } 347 1.9.2.2 bouyer 348 1.9.2.2 bouyer if (isp_getrqentry(isp, &iptr, &optr, &outp)) { 349 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, 350 1.9.2.2 bouyer "Request Queue Overflow in isp_lun_cmd"); 351 1.9.2.2 bouyer return (-1); 352 1.9.2.2 bouyer } 353 1.9.2.2 bouyer ISP_SWIZ_ENABLE_LUN(isp, outp, &el); 354 1.9.2.2 bouyer ISP_TDQE(isp, "isp_lun_cmd", (int) optr, &el); 355 1.9.2.2 bouyer ISP_ADD_REQUEST(isp, iptr); 356 1.9.2.2 bouyer return (0); 357 1.9.2.2 bouyer } 358 1.9.2.2 bouyer 359 1.9.2.2 bouyer 360 1.9.2.2 bouyer int 361 1.9.2.2 bouyer isp_target_put_entry(isp, ap) 362 1.9.2.2 bouyer struct ispsoftc *isp; 363 1.9.2.2 bouyer void *ap; 364 1.9.2.2 bouyer { 365 1.9.2.2 bouyer void *outp; 366 1.9.2.2 bouyer u_int16_t iptr, optr; 367 1.9.2.2 bouyer u_int8_t etype = ((isphdr_t *) ap)->rqs_entry_type; 368 1.9.2.2 bouyer 369 1.9.2.2 bouyer if (isp_getrqentry(isp, &iptr, &optr, &outp)) { 370 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, 371 1.9.2.2 bouyer "Request Queue Overflow in isp_target_put_entry"); 372 1.9.2.2 bouyer return (-1); 373 1.9.2.2 bouyer } 374 1.9.2.2 bouyer switch (etype) { 375 1.9.2.2 bouyer case RQSTYPE_ATIO: 376 1.9.2.2 bouyer ISP_SWIZ_ATIO(isp, outp, ap); 377 1.9.2.2 bouyer break; 378 1.9.2.2 bouyer case RQSTYPE_ATIO2: 379 1.9.2.2 bouyer ISP_SWIZ_ATIO2(isp, outp, ap); 380 1.9.2.2 bouyer break; 381 1.9.2.2 bouyer case RQSTYPE_CTIO: 382 1.9.2.2 bouyer ISP_SWIZ_CTIO(isp, outp, ap); 383 1.9.2.2 bouyer break; 384 1.9.2.2 bouyer case RQSTYPE_CTIO2: 385 1.9.2.2 bouyer ISP_SWIZ_CTIO2(isp, outp, ap); 386 1.9.2.2 bouyer break; 387 1.9.2.2 bouyer default: 388 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 389 1.9.2.2 bouyer "Unknown type 0x%x in isp_put_entry", etype); 390 1.9.2.2 bouyer return (-1); 391 1.9.2.2 bouyer } 392 1.9.2.2 bouyer 393 1.9.2.2 bouyer ISP_TDQE(isp, "isp_target_put_entry", (int) optr, ap);; 394 1.9.2.2 bouyer 395 1.9.2.2 bouyer ISP_ADD_REQUEST(isp, iptr); 396 1.9.2.2 bouyer return (0); 397 1.9.2.2 bouyer } 398 1.9.2.2 bouyer 399 1.9.2.2 bouyer int 400 1.9.2.2 bouyer isp_target_put_atio(isp, iid, tgt, lun, ttype, tval) 401 1.9.2.2 bouyer struct ispsoftc *isp; 402 1.9.2.2 bouyer int iid; 403 1.9.2.2 bouyer int tgt; 404 1.9.2.2 bouyer int lun; 405 1.9.2.2 bouyer int ttype; 406 1.9.2.2 bouyer int tval; 407 1.9.2.2 bouyer { 408 1.9.2.2 bouyer union { 409 1.9.2.2 bouyer at_entry_t _atio; 410 1.9.2.2 bouyer at2_entry_t _atio2; 411 1.9.2.2 bouyer } atun; 412 1.9.2.2 bouyer 413 1.9.2.2 bouyer MEMZERO(&atun, sizeof atun); 414 1.9.2.2 bouyer if (IS_FC(isp)) { 415 1.9.2.2 bouyer atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2; 416 1.9.2.2 bouyer atun._atio2.at_header.rqs_entry_count = 1; 417 1.9.2.2 bouyer if (isp->isp_maxluns > 16) { 418 1.9.2.2 bouyer atun._atio2.at_scclun = (u_int16_t) lun; 419 1.9.2.2 bouyer } else { 420 1.9.2.2 bouyer atun._atio2.at_lun = (u_int8_t) lun; 421 1.9.2.2 bouyer } 422 1.9.2.2 bouyer atun._atio2.at_status = CT_OK; 423 1.9.2.2 bouyer } else { 424 1.9.2.2 bouyer atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO; 425 1.9.2.2 bouyer atun._atio.at_header.rqs_entry_count = 1; 426 1.9.2.2 bouyer atun._atio.at_iid = iid; 427 1.9.2.2 bouyer atun._atio.at_tgt = tgt; 428 1.9.2.2 bouyer atun._atio.at_lun = lun; 429 1.9.2.2 bouyer atun._atio.at_tag_type = ttype; 430 1.9.2.2 bouyer atun._atio.at_tag_val = tval; 431 1.9.2.2 bouyer atun._atio.at_status = CT_OK; 432 1.9.2.2 bouyer } 433 1.9.2.2 bouyer return (isp_target_put_entry(isp, &atun)); 434 1.9.2.2 bouyer } 435 1.9.2.2 bouyer 436 1.9.2.2 bouyer /* 437 1.9.2.2 bouyer * Command completion- both for handling cases of no resources or 438 1.9.2.2 bouyer * no blackhole driver, or other cases where we have to, inline, 439 1.9.2.2 bouyer * finish the command sanely, or for normal command completion. 440 1.9.2.2 bouyer * 441 1.9.2.2 bouyer * The 'completion' code value has the scsi status byte in the low 8 bits. 442 1.9.2.2 bouyer * If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have 443 1.9.2.2 bouyer * the sense key and bits 16..23 have the ASCQ and bits 24..31 have the ASC 444 1.9.2.2 bouyer * values. 445 1.9.2.2 bouyer * 446 1.9.2.2 bouyer * NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't 447 1.9.2.2 bouyer * NB: inline SCSI sense reporting. 448 1.9.2.2 bouyer * 449 1.9.2.2 bouyer * For both parallel && fibre channel, we use the feature that does 450 1.9.2.2 bouyer * an automatic resource autoreplenish so we don't have then later do 451 1.9.2.2 bouyer * put of an atio to replenish the f/w's resource count. 452 1.9.2.2 bouyer */ 453 1.9.2.2 bouyer 454 1.9.2.2 bouyer int 455 1.9.2.2 bouyer isp_endcmd(struct ispsoftc *isp, void *arg, u_int32_t code, u_int32_t hdl) 456 1.9.2.2 bouyer { 457 1.9.2.2 bouyer int sts; 458 1.9.2.2 bouyer union { 459 1.9.2.2 bouyer ct_entry_t _ctio; 460 1.9.2.2 bouyer ct2_entry_t _ctio2; 461 1.9.2.2 bouyer } un; 462 1.9.2.2 bouyer 463 1.9.2.2 bouyer MEMZERO(&un, sizeof un); 464 1.9.2.2 bouyer sts = code & 0xff; 465 1.9.2.2 bouyer 466 1.9.2.2 bouyer if (IS_FC(isp)) { 467 1.9.2.2 bouyer at2_entry_t *aep = arg; 468 1.9.2.2 bouyer ct2_entry_t *cto = &un._ctio2; 469 1.9.2.2 bouyer 470 1.9.2.2 bouyer cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2; 471 1.9.2.2 bouyer cto->ct_header.rqs_entry_count = 1; 472 1.9.2.2 bouyer cto->ct_iid = aep->at_iid; 473 1.9.2.2 bouyer if (isp->isp_maxluns <= 16) { 474 1.9.2.2 bouyer cto->ct_lun = aep->at_lun; 475 1.9.2.2 bouyer } 476 1.9.2.2 bouyer cto->ct_rxid = aep->at_rxid; 477 1.9.2.2 bouyer cto->rsp.m1.ct_scsi_status = sts & 0xff; 478 1.9.2.2 bouyer cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1; 479 1.9.2.2 bouyer if (hdl == 0) { 480 1.9.2.2 bouyer cto->ct_flags |= CT2_CCINCR; 481 1.9.2.2 bouyer } 482 1.9.2.2 bouyer if (aep->at_datalen) { 483 1.9.2.2 bouyer cto->ct_resid = aep->at_datalen; 484 1.9.2.2 bouyer cto->ct_flags |= CT2_DATA_UNDER; 485 1.9.2.2 bouyer } 486 1.9.2.2 bouyer if ((sts & 0xff) == SCSI_CHECK && (sts & ECMD_SVALID)) { 487 1.9.2.2 bouyer cto->rsp.m1.ct_resp[0] = 0xf0; 488 1.9.2.2 bouyer cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf; 489 1.9.2.2 bouyer cto->rsp.m1.ct_resp[7] = 8; 490 1.9.2.2 bouyer cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff; 491 1.9.2.2 bouyer cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff; 492 1.9.2.2 bouyer cto->rsp.m1.ct_senselen = 16; 493 1.9.2.2 bouyer cto->ct_flags |= CT2_SNSLEN_VALID; 494 1.9.2.2 bouyer } 495 1.9.2.2 bouyer cto->ct_reserved = hdl; 496 1.9.2.2 bouyer } else { 497 1.9.2.2 bouyer at_entry_t *aep = arg; 498 1.9.2.2 bouyer ct_entry_t *cto = &un._ctio; 499 1.9.2.2 bouyer 500 1.9.2.2 bouyer cto->ct_header.rqs_entry_type = RQSTYPE_CTIO; 501 1.9.2.2 bouyer cto->ct_header.rqs_entry_count = 1; 502 1.9.2.2 bouyer cto->ct_iid = aep->at_iid; 503 1.9.2.2 bouyer cto->ct_tgt = aep->at_tgt; 504 1.9.2.2 bouyer cto->ct_lun = aep->at_lun; 505 1.9.2.2 bouyer cto->ct_tag_type = aep->at_tag_type; 506 1.9.2.2 bouyer cto->ct_tag_val = aep->at_tag_val; 507 1.9.2.2 bouyer cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA; 508 1.9.2.2 bouyer if (hdl == 0) { 509 1.9.2.2 bouyer cto->ct_flags |= CT_CCINCR; 510 1.9.2.2 bouyer } 511 1.9.2.2 bouyer cto->ct_scsi_status = sts; 512 1.9.2.2 bouyer cto->ct_reserved = hdl; 513 1.9.2.2 bouyer } 514 1.9.2.2 bouyer return (isp_target_put_entry(isp, &un)); 515 1.9.2.2 bouyer } 516 1.9.2.2 bouyer 517 1.9.2.2 bouyer void 518 1.9.2.2 bouyer isp_target_async(isp, bus, event) 519 1.9.2.2 bouyer struct ispsoftc *isp; 520 1.9.2.2 bouyer int bus; 521 1.9.2.2 bouyer int event; 522 1.9.2.2 bouyer { 523 1.9.2.2 bouyer tmd_event_t evt; 524 1.9.2.2 bouyer tmd_msg_t msg; 525 1.9.2.2 bouyer 526 1.9.2.2 bouyer switch (event) { 527 1.9.2.2 bouyer /* 528 1.9.2.2 bouyer * These three we handle here to propagate an effective bus reset 529 1.9.2.2 bouyer * upstream, but these do not require any immediate notify actions 530 1.9.2.2 bouyer * so we return when done. 531 1.9.2.2 bouyer */ 532 1.9.2.2 bouyer case ASYNC_LIP_OCCURRED: 533 1.9.2.2 bouyer case ASYNC_LOOP_UP: 534 1.9.2.2 bouyer case ASYNC_LOOP_DOWN: 535 1.9.2.2 bouyer evt.ev_bus = bus; 536 1.9.2.2 bouyer evt.ev_event = event; 537 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt); 538 1.9.2.2 bouyer return; 539 1.9.2.2 bouyer 540 1.9.2.2 bouyer case ASYNC_LOOP_RESET: 541 1.9.2.2 bouyer case ASYNC_BUS_RESET: 542 1.9.2.2 bouyer case ASYNC_TIMEOUT_RESET: 543 1.9.2.2 bouyer if (IS_FC(isp)) { 544 1.9.2.2 bouyer return; /* we'll be getting an inotify instead */ 545 1.9.2.2 bouyer } 546 1.9.2.2 bouyer evt.ev_bus = bus; 547 1.9.2.2 bouyer evt.ev_event = event; 548 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt); 549 1.9.2.2 bouyer break; 550 1.9.2.2 bouyer case ASYNC_DEVICE_RESET: 551 1.9.2.2 bouyer /* 552 1.9.2.2 bouyer * Bus Device Reset resets a specific target, so 553 1.9.2.2 bouyer * we pass this as a synthesized message. 554 1.9.2.2 bouyer */ 555 1.9.2.2 bouyer MEMZERO(&msg, sizeof msg); 556 1.9.2.2 bouyer if (IS_FC(isp)) { 557 1.9.2.2 bouyer msg.nt_iid = FCPARAM(isp)->isp_loopid; 558 1.9.2.2 bouyer } else { 559 1.9.2.2 bouyer msg.nt_iid = SDPARAM(isp)->isp_initiator_id; 560 1.9.2.2 bouyer } 561 1.9.2.2 bouyer msg.nt_bus = bus; 562 1.9.2.2 bouyer msg.nt_msg[0] = MSG_BUS_DEV_RESET; 563 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg); 564 1.9.2.2 bouyer break; 565 1.9.2.2 bouyer default: 566 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 567 1.9.2.2 bouyer "isp_target_async: unknown event 0x%x", event); 568 1.9.2.2 bouyer break; 569 1.9.2.2 bouyer } 570 1.9.2.2 bouyer if (isp->isp_state == ISP_RUNSTATE) 571 1.9.2.2 bouyer isp_notify_ack(isp, NULL); 572 1.9.2.2 bouyer } 573 1.9.2.2 bouyer 574 1.9.2.2 bouyer 575 1.9.2.2 bouyer /* 576 1.9.2.2 bouyer * Process a received message. 577 1.9.2.2 bouyer * The ISP firmware can handle most messages, there are only 578 1.9.2.2 bouyer * a few that we need to deal with: 579 1.9.2.2 bouyer * - abort: clean up the current command 580 1.9.2.2 bouyer * - abort tag and clear queue 581 1.9.2.2 bouyer */ 582 1.9.2.2 bouyer 583 1.9.2.2 bouyer static void 584 1.9.2.2 bouyer isp_got_msg(isp, bus, inp) 585 1.9.2.2 bouyer struct ispsoftc *isp; 586 1.9.2.2 bouyer int bus; 587 1.9.2.2 bouyer in_entry_t *inp; 588 1.9.2.2 bouyer { 589 1.9.2.2 bouyer u_int8_t status = inp->in_status & ~QLTM_SVALID; 590 1.9.2.2 bouyer 591 1.9.2.2 bouyer if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) { 592 1.9.2.2 bouyer tmd_msg_t msg; 593 1.9.2.2 bouyer 594 1.9.2.2 bouyer MEMZERO(&msg, sizeof (msg)); 595 1.9.2.2 bouyer msg.nt_bus = bus; 596 1.9.2.2 bouyer msg.nt_iid = inp->in_iid; 597 1.9.2.2 bouyer msg.nt_tgt = inp->in_tgt; 598 1.9.2.2 bouyer msg.nt_lun = inp->in_lun; 599 1.9.2.2 bouyer msg.nt_tagtype = inp->in_tag_type; 600 1.9.2.2 bouyer msg.nt_tagval = inp->in_tag_val; 601 1.9.2.2 bouyer MEMCPY(msg.nt_msg, inp->in_msg, IN_MSGLEN); 602 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg); 603 1.9.2.2 bouyer } else { 604 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 605 1.9.2.2 bouyer "unknown immediate notify status 0x%x", inp->in_status); 606 1.9.2.2 bouyer } 607 1.9.2.2 bouyer } 608 1.9.2.2 bouyer 609 1.9.2.2 bouyer /* 610 1.9.2.2 bouyer * Synthesize a message from the task management flags in a FCP_CMND_IU. 611 1.9.2.2 bouyer */ 612 1.9.2.2 bouyer static void 613 1.9.2.2 bouyer isp_got_msg_fc(isp, bus, inp) 614 1.9.2.2 bouyer struct ispsoftc *isp; 615 1.9.2.2 bouyer int bus; 616 1.9.2.2 bouyer in_fcentry_t *inp; 617 1.9.2.2 bouyer { 618 1.9.2.2 bouyer static char *f1 = "%s from iid %d lun %d seq 0x%x"; 619 1.9.2.2 bouyer static char *f2 = 620 1.9.2.2 bouyer "unknown %s 0x%x lun %d iid %d task flags 0x%x seq 0x%x\n"; 621 1.9.2.2 bouyer 622 1.9.2.2 bouyer if (inp->in_status != IN_MSG_RECEIVED) { 623 1.9.2.2 bouyer isp_prt(isp, ISP_LOGINFO, f2, "immediate notify status", 624 1.9.2.2 bouyer inp->in_status, inp->in_lun, inp->in_iid, 625 1.9.2.2 bouyer inp->in_task_flags, inp->in_seqid); 626 1.9.2.2 bouyer } else { 627 1.9.2.2 bouyer tmd_msg_t msg; 628 1.9.2.2 bouyer 629 1.9.2.2 bouyer MEMZERO(&msg, sizeof (msg)); 630 1.9.2.2 bouyer msg.nt_bus = bus; 631 1.9.2.2 bouyer msg.nt_iid = inp->in_iid; 632 1.9.2.2 bouyer if (isp->isp_maxluns > 16) { 633 1.9.2.2 bouyer msg.nt_lun = inp->in_scclun; 634 1.9.2.2 bouyer } else { 635 1.9.2.2 bouyer msg.nt_lun = inp->in_lun; 636 1.9.2.2 bouyer } 637 1.9.2.2 bouyer msg.nt_tagval = inp->in_seqid; 638 1.9.2.2 bouyer 639 1.9.2.2 bouyer if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK) { 640 1.9.2.2 bouyer isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK", 641 1.9.2.2 bouyer inp->in_iid, inp->in_lun, inp->in_seqid); 642 1.9.2.2 bouyer msg.nt_msg[0] = MSG_ABORT_TAG; 643 1.9.2.2 bouyer } else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) { 644 1.9.2.2 bouyer isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET", 645 1.9.2.2 bouyer inp->in_iid, inp->in_lun, inp->in_seqid); 646 1.9.2.2 bouyer msg.nt_msg[0] = MSG_CLEAR_QUEUE; 647 1.9.2.2 bouyer } else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) { 648 1.9.2.2 bouyer isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET", 649 1.9.2.2 bouyer inp->in_iid, inp->in_lun, inp->in_seqid); 650 1.9.2.2 bouyer msg.nt_msg[0] = MSG_BUS_DEV_RESET; 651 1.9.2.2 bouyer } else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) { 652 1.9.2.2 bouyer isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA", 653 1.9.2.2 bouyer inp->in_iid, inp->in_lun, inp->in_seqid); 654 1.9.2.2 bouyer /* ???? */ 655 1.9.2.2 bouyer msg.nt_msg[0] = MSG_REL_RECOVERY; 656 1.9.2.2 bouyer } else if (inp->in_task_flags & TASK_FLAGS_TERMINATE_TASK) { 657 1.9.2.2 bouyer isp_prt(isp, ISP_LOGINFO, f1, "TERMINATE TASK", 658 1.9.2.2 bouyer inp->in_iid, inp->in_lun, inp->in_seqid); 659 1.9.2.2 bouyer msg.nt_msg[0] = MSG_TERM_IO_PROC; 660 1.9.2.2 bouyer } else { 661 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, f2, "task flag", 662 1.9.2.2 bouyer inp->in_status, inp->in_lun, inp->in_iid, 663 1.9.2.2 bouyer inp->in_task_flags, inp->in_seqid); 664 1.9.2.2 bouyer } 665 1.9.2.2 bouyer if (msg.nt_msg[0]) { 666 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg); 667 1.9.2.2 bouyer } 668 1.9.2.2 bouyer } 669 1.9.2.2 bouyer } 670 1.9.2.2 bouyer 671 1.9.2.2 bouyer static void 672 1.9.2.2 bouyer isp_notify_ack(isp, arg) 673 1.9.2.2 bouyer struct ispsoftc *isp; 674 1.9.2.2 bouyer void *arg; 675 1.9.2.2 bouyer { 676 1.9.2.2 bouyer char storage[QENTRY_LEN]; 677 1.9.2.2 bouyer u_int16_t iptr, optr; 678 1.9.2.2 bouyer void *outp; 679 1.9.2.2 bouyer 680 1.9.2.2 bouyer if (isp_getrqentry(isp, &iptr, &optr, &outp)) { 681 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, 682 1.9.2.2 bouyer "Request Queue Overflow For isp_notify_ack"); 683 1.9.2.2 bouyer return; 684 1.9.2.2 bouyer } 685 1.9.2.2 bouyer 686 1.9.2.2 bouyer MEMZERO(storage, QENTRY_LEN); 687 1.9.2.2 bouyer 688 1.9.2.2 bouyer if (IS_FC(isp)) { 689 1.9.2.2 bouyer na_fcentry_t *na = (na_fcentry_t *) storage; 690 1.9.2.2 bouyer if (arg) { 691 1.9.2.2 bouyer in_fcentry_t *inp = arg; 692 1.9.2.2 bouyer MEMCPY(storage, arg, sizeof (isphdr_t)); 693 1.9.2.2 bouyer na->na_iid = inp->in_iid; 694 1.9.2.2 bouyer if (isp->isp_maxluns > 16) { 695 1.9.2.2 bouyer na->na_lun = inp->in_scclun; 696 1.9.2.2 bouyer } else { 697 1.9.2.2 bouyer na->na_lun = inp->in_lun; 698 1.9.2.2 bouyer } 699 1.9.2.2 bouyer na->na_task_flags = inp->in_task_flags; 700 1.9.2.2 bouyer na->na_seqid = inp->in_seqid; 701 1.9.2.2 bouyer na->na_flags = NAFC_RCOUNT; 702 1.9.2.2 bouyer if (inp->in_status == IN_RESET) { 703 1.9.2.2 bouyer na->na_flags |= NAFC_RST_CLRD; 704 1.9.2.2 bouyer } 705 1.9.2.2 bouyer } else { 706 1.9.2.2 bouyer na->na_flags = NAFC_RST_CLRD; 707 1.9.2.2 bouyer } 708 1.9.2.2 bouyer na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK; 709 1.9.2.2 bouyer na->na_header.rqs_entry_count = 1; 710 1.9.2.2 bouyer ISP_SWIZ_NOT_ACK_FC(isp, outp, na); 711 1.9.2.2 bouyer } else { 712 1.9.2.2 bouyer na_entry_t *na = (na_entry_t *) storage; 713 1.9.2.2 bouyer if (arg) { 714 1.9.2.2 bouyer in_entry_t *inp = arg; 715 1.9.2.2 bouyer MEMCPY(storage, arg, sizeof (isphdr_t)); 716 1.9.2.2 bouyer na->na_iid = inp->in_iid; 717 1.9.2.2 bouyer na->na_lun = inp->in_lun; 718 1.9.2.2 bouyer na->na_tgt = inp->in_tgt; 719 1.9.2.2 bouyer na->na_seqid = inp->in_seqid; 720 1.9.2.2 bouyer if (inp->in_status == IN_RESET) { 721 1.9.2.2 bouyer na->na_event = NA_RST_CLRD; 722 1.9.2.2 bouyer } 723 1.9.2.2 bouyer } else { 724 1.9.2.2 bouyer na->na_event = NA_RST_CLRD; 725 1.9.2.2 bouyer } 726 1.9.2.2 bouyer na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK; 727 1.9.2.2 bouyer na->na_header.rqs_entry_count = 1; 728 1.9.2.2 bouyer ISP_SWIZ_NOT_ACK(isp, outp, na); 729 1.9.2.2 bouyer } 730 1.9.2.2 bouyer ISP_TDQE(isp, "isp_notify_ack", (int) optr, storage); 731 1.9.2.2 bouyer ISP_ADD_REQUEST(isp, iptr); 732 1.9.2.2 bouyer } 733 1.9.2.2 bouyer 734 1.9.2.2 bouyer static void 735 1.9.2.2 bouyer isp_handle_atio(isp, aep) 736 1.9.2.2 bouyer struct ispsoftc *isp; 737 1.9.2.2 bouyer at_entry_t *aep; 738 1.9.2.2 bouyer { 739 1.9.2.2 bouyer int lun; 740 1.9.2.2 bouyer lun = aep->at_lun; 741 1.9.2.2 bouyer /* 742 1.9.2.2 bouyer * The firmware status (except for the QLTM_SVALID bit) indicates 743 1.9.2.2 bouyer * why this ATIO was sent to us. 744 1.9.2.2 bouyer * 745 1.9.2.2 bouyer * If QLTM_SVALID is set, the firware has recommended Sense Data. 746 1.9.2.2 bouyer * 747 1.9.2.2 bouyer * If the DISCONNECTS DISABLED bit is set in the flags field, 748 1.9.2.2 bouyer * we're still connected on the SCSI bus - i.e. the initiator 749 1.9.2.2 bouyer * did not set DiscPriv in the identify message. We don't care 750 1.9.2.2 bouyer * about this so it's ignored. 751 1.9.2.2 bouyer */ 752 1.9.2.2 bouyer 753 1.9.2.2 bouyer switch(aep->at_status & ~QLTM_SVALID) { 754 1.9.2.2 bouyer case AT_PATH_INVALID: 755 1.9.2.2 bouyer /* 756 1.9.2.2 bouyer * ATIO rejected by the firmware due to disabled lun. 757 1.9.2.2 bouyer */ 758 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 759 1.9.2.2 bouyer "rejected ATIO for disabled lun %d", lun); 760 1.9.2.2 bouyer break; 761 1.9.2.2 bouyer case AT_NOCAP: 762 1.9.2.2 bouyer /* 763 1.9.2.2 bouyer * Requested Capability not available 764 1.9.2.2 bouyer * We sent an ATIO that overflowed the firmware's 765 1.9.2.2 bouyer * command resource count. 766 1.9.2.2 bouyer */ 767 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 768 1.9.2.2 bouyer "rejected ATIO for lun %d because of command count" 769 1.9.2.2 bouyer " overflow", lun); 770 1.9.2.2 bouyer break; 771 1.9.2.2 bouyer 772 1.9.2.2 bouyer case AT_BDR_MSG: 773 1.9.2.2 bouyer /* 774 1.9.2.2 bouyer * If we send an ATIO to the firmware to increment 775 1.9.2.2 bouyer * its command resource count, and the firmware is 776 1.9.2.2 bouyer * recovering from a Bus Device Reset, it returns 777 1.9.2.2 bouyer * the ATIO with this status. We set the command 778 1.9.2.2 bouyer * resource count in the Enable Lun entry and no 779 1.9.2.2 bouyer * not increment it. Therefore we should never get 780 1.9.2.2 bouyer * this status here. 781 1.9.2.2 bouyer */ 782 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, atiocope, lun); 783 1.9.2.2 bouyer break; 784 1.9.2.2 bouyer 785 1.9.2.2 bouyer case AT_CDB: /* Got a CDB */ 786 1.9.2.2 bouyer case AT_PHASE_ERROR: /* Bus Phase Sequence Error */ 787 1.9.2.2 bouyer /* 788 1.9.2.2 bouyer * Punt to platform specific layer. 789 1.9.2.2 bouyer */ 790 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep); 791 1.9.2.2 bouyer break; 792 1.9.2.2 bouyer 793 1.9.2.2 bouyer case AT_RESET: 794 1.9.2.2 bouyer /* 795 1.9.2.2 bouyer * A bus reset came along an blew away this command. Why 796 1.9.2.2 bouyer * they do this in addition the async event code stuff, 797 1.9.2.2 bouyer * I dunno. 798 1.9.2.2 bouyer * 799 1.9.2.2 bouyer * Ignore it because the async event will clear things 800 1.9.2.2 bouyer * up for us. 801 1.9.2.2 bouyer */ 802 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, atior, lun, aep->at_iid); 803 1.9.2.2 bouyer break; 804 1.9.2.2 bouyer 805 1.9.2.2 bouyer 806 1.9.2.2 bouyer default: 807 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 808 1.9.2.2 bouyer "Unknown ATIO status 0x%x from initiator %d for lun %d", 809 1.9.2.2 bouyer aep->at_status, aep->at_iid, lun); 810 1.9.2.2 bouyer (void) isp_target_put_atio(isp, aep->at_iid, aep->at_tgt, 811 1.9.2.2 bouyer lun, aep->at_tag_type, aep->at_tag_val); 812 1.9.2.2 bouyer break; 813 1.9.2.2 bouyer } 814 1.9.2.2 bouyer } 815 1.9.2.2 bouyer 816 1.9.2.2 bouyer static void 817 1.9.2.2 bouyer isp_handle_atio2(isp, aep) 818 1.9.2.2 bouyer struct ispsoftc *isp; 819 1.9.2.2 bouyer at2_entry_t *aep; 820 1.9.2.2 bouyer { 821 1.9.2.2 bouyer int lun; 822 1.9.2.2 bouyer 823 1.9.2.2 bouyer if (isp->isp_maxluns > 16) { 824 1.9.2.2 bouyer lun = aep->at_scclun; 825 1.9.2.2 bouyer } else { 826 1.9.2.2 bouyer lun = aep->at_lun; 827 1.9.2.2 bouyer } 828 1.9.2.2 bouyer 829 1.9.2.2 bouyer /* 830 1.9.2.2 bouyer * The firmware status (except for the QLTM_SVALID bit) indicates 831 1.9.2.2 bouyer * why this ATIO was sent to us. 832 1.9.2.2 bouyer * 833 1.9.2.2 bouyer * If QLTM_SVALID is set, the firware has recommended Sense Data. 834 1.9.2.2 bouyer * 835 1.9.2.2 bouyer * If the DISCONNECTS DISABLED bit is set in the flags field, 836 1.9.2.2 bouyer * we're still connected on the SCSI bus - i.e. the initiator 837 1.9.2.2 bouyer * did not set DiscPriv in the identify message. We don't care 838 1.9.2.2 bouyer * about this so it's ignored. 839 1.9.2.2 bouyer */ 840 1.9.2.2 bouyer 841 1.9.2.2 bouyer switch(aep->at_status & ~QLTM_SVALID) { 842 1.9.2.2 bouyer case AT_PATH_INVALID: 843 1.9.2.2 bouyer /* 844 1.9.2.2 bouyer * ATIO rejected by the firmware due to disabled lun. 845 1.9.2.2 bouyer */ 846 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 847 1.9.2.2 bouyer "rejected ATIO2 for disabled lun %d", lun); 848 1.9.2.2 bouyer break; 849 1.9.2.2 bouyer case AT_NOCAP: 850 1.9.2.2 bouyer /* 851 1.9.2.2 bouyer * Requested Capability not available 852 1.9.2.2 bouyer * We sent an ATIO that overflowed the firmware's 853 1.9.2.2 bouyer * command resource count. 854 1.9.2.2 bouyer */ 855 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 856 1.9.2.2 bouyer "rejected ATIO2 for lun %d- command count overflow", lun); 857 1.9.2.2 bouyer break; 858 1.9.2.2 bouyer 859 1.9.2.2 bouyer case AT_BDR_MSG: 860 1.9.2.2 bouyer /* 861 1.9.2.2 bouyer * If we send an ATIO to the firmware to increment 862 1.9.2.2 bouyer * its command resource count, and the firmware is 863 1.9.2.2 bouyer * recovering from a Bus Device Reset, it returns 864 1.9.2.2 bouyer * the ATIO with this status. We set the command 865 1.9.2.2 bouyer * resource count in the Enable Lun entry and no 866 1.9.2.2 bouyer * not increment it. Therefore we should never get 867 1.9.2.2 bouyer * this status here. 868 1.9.2.2 bouyer */ 869 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, atiocope, lun); 870 1.9.2.2 bouyer break; 871 1.9.2.2 bouyer 872 1.9.2.2 bouyer case AT_CDB: /* Got a CDB */ 873 1.9.2.2 bouyer /* 874 1.9.2.2 bouyer * Punt to platform specific layer. 875 1.9.2.2 bouyer */ 876 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep); 877 1.9.2.2 bouyer break; 878 1.9.2.2 bouyer 879 1.9.2.2 bouyer case AT_RESET: 880 1.9.2.2 bouyer /* 881 1.9.2.2 bouyer * A bus reset came along an blew away this command. Why 882 1.9.2.2 bouyer * they do this in addition the async event code stuff, 883 1.9.2.2 bouyer * I dunno. 884 1.9.2.2 bouyer * 885 1.9.2.2 bouyer * Ignore it because the async event will clear things 886 1.9.2.2 bouyer * up for us. 887 1.9.2.2 bouyer */ 888 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, atior, lun, aep->at_iid); 889 1.9.2.2 bouyer break; 890 1.9.2.2 bouyer 891 1.9.2.2 bouyer 892 1.9.2.2 bouyer default: 893 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 894 1.9.2.2 bouyer "Unknown ATIO2 status 0x%x from initiator %d for lun %d", 895 1.9.2.2 bouyer aep->at_status, aep->at_iid, lun); 896 1.9.2.2 bouyer (void) isp_target_put_atio(isp, aep->at_iid, 0, lun, 0, 0); 897 1.9.2.2 bouyer break; 898 1.9.2.2 bouyer } 899 1.9.2.2 bouyer } 900 1.9.2.2 bouyer 901 1.9.2.2 bouyer static void 902 1.9.2.2 bouyer isp_handle_ctio(isp, ct) 903 1.9.2.2 bouyer struct ispsoftc *isp; 904 1.9.2.2 bouyer ct_entry_t *ct; 905 1.9.2.2 bouyer { 906 1.9.2.2 bouyer XS_T *xs; 907 1.9.2.2 bouyer int pl = ISP_LOGTDEBUG2; 908 1.9.2.2 bouyer char *fmsg = NULL; 909 1.9.2.2 bouyer 910 1.9.2.2 bouyer if (ct->ct_reserved) { 911 1.9.2.2 bouyer xs = isp_find_xs(isp, ct->ct_reserved); 912 1.9.2.2 bouyer if (xs == NULL) 913 1.9.2.2 bouyer pl = ISP_LOGALL; 914 1.9.2.2 bouyer } else { 915 1.9.2.2 bouyer pl = ISP_LOGTDEBUG1; 916 1.9.2.2 bouyer xs = NULL; 917 1.9.2.2 bouyer } 918 1.9.2.2 bouyer 919 1.9.2.2 bouyer switch(ct->ct_status & ~QLTM_SVALID) { 920 1.9.2.2 bouyer case CT_OK: 921 1.9.2.2 bouyer /* 922 1.9.2.2 bouyer * There are generally 3 possibilities as to why we'd get 923 1.9.2.2 bouyer * this condition: 924 1.9.2.2 bouyer * We disconnected after receiving a CDB. 925 1.9.2.2 bouyer * We sent or received data. 926 1.9.2.2 bouyer * We sent status & command complete. 927 1.9.2.2 bouyer */ 928 1.9.2.2 bouyer 929 1.9.2.2 bouyer if (ct->ct_flags & CT_SENDSTATUS) { 930 1.9.2.2 bouyer break; 931 1.9.2.2 bouyer } else if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) { 932 1.9.2.2 bouyer /* 933 1.9.2.2 bouyer * Nothing to do in this case. 934 1.9.2.2 bouyer */ 935 1.9.2.2 bouyer isp_prt(isp, pl, "CTIO- iid %d disconnected OK", 936 1.9.2.2 bouyer ct->ct_iid); 937 1.9.2.2 bouyer return; 938 1.9.2.2 bouyer } 939 1.9.2.2 bouyer break; 940 1.9.2.2 bouyer 941 1.9.2.2 bouyer case CT_BDR_MSG: 942 1.9.2.2 bouyer /* 943 1.9.2.2 bouyer * Bus Device Reset message received or the SCSI Bus has 944 1.9.2.2 bouyer * been Reset; the firmware has gone to Bus Free. 945 1.9.2.2 bouyer * 946 1.9.2.2 bouyer * The firmware generates an async mailbox interupt to 947 1.9.2.2 bouyer * notify us of this and returns outstanding CTIOs with this 948 1.9.2.2 bouyer * status. These CTIOs are handled in that same way as 949 1.9.2.2 bouyer * CT_ABORTED ones, so just fall through here. 950 1.9.2.2 bouyer */ 951 1.9.2.2 bouyer fmsg = "Bus Device Reset"; 952 1.9.2.2 bouyer /*FALLTHROUGH*/ 953 1.9.2.2 bouyer case CT_RESET: 954 1.9.2.2 bouyer if (fmsg == NULL) 955 1.9.2.2 bouyer fmsg = "Bus Reset"; 956 1.9.2.2 bouyer /*FALLTHROUGH*/ 957 1.9.2.2 bouyer case CT_ABORTED: 958 1.9.2.2 bouyer /* 959 1.9.2.2 bouyer * When an Abort message is received the firmware goes to 960 1.9.2.2 bouyer * Bus Free and returns all outstanding CTIOs with the status 961 1.9.2.2 bouyer * set, then sends us an Immediate Notify entry. 962 1.9.2.2 bouyer */ 963 1.9.2.2 bouyer if (fmsg == NULL) 964 1.9.2.2 bouyer fmsg = "ABORT TASK sent by Initiator"; 965 1.9.2.2 bouyer 966 1.9.2.2 bouyer isp_prt(isp, ISP_LOGWARN, "CTIO destroyed by %s", fmsg); 967 1.9.2.2 bouyer break; 968 1.9.2.2 bouyer 969 1.9.2.2 bouyer case CT_INVAL: 970 1.9.2.2 bouyer /* 971 1.9.2.2 bouyer * CTIO rejected by the firmware due to disabled lun. 972 1.9.2.2 bouyer * "Cannot Happen". 973 1.9.2.2 bouyer */ 974 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 975 1.9.2.2 bouyer "Firmware rejected CTIO for disabled lun %d", 976 1.9.2.2 bouyer ct->ct_lun); 977 1.9.2.2 bouyer break; 978 1.9.2.2 bouyer 979 1.9.2.2 bouyer case CT_NOPATH: 980 1.9.2.2 bouyer /* 981 1.9.2.2 bouyer * CTIO rejected by the firmware due "no path for the 982 1.9.2.2 bouyer * nondisconnecting nexus specified". This means that 983 1.9.2.2 bouyer * we tried to access the bus while a non-disconnecting 984 1.9.2.2 bouyer * command is in process. 985 1.9.2.2 bouyer */ 986 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 987 1.9.2.2 bouyer "Firmware rejected CTIO for bad nexus %d/%d/%d", 988 1.9.2.2 bouyer ct->ct_iid, ct->ct_tgt, ct->ct_lun); 989 1.9.2.2 bouyer break; 990 1.9.2.2 bouyer 991 1.9.2.2 bouyer case CT_RSELTMO: 992 1.9.2.2 bouyer fmsg = "Reselection"; 993 1.9.2.2 bouyer /*FALLTHROUGH*/ 994 1.9.2.2 bouyer case CT_TIMEOUT: 995 1.9.2.2 bouyer if (fmsg == NULL) 996 1.9.2.2 bouyer fmsg = "Command"; 997 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg); 998 1.9.2.2 bouyer break; 999 1.9.2.2 bouyer 1000 1.9.2.2 bouyer case CT_ERR: 1001 1.9.2.2 bouyer fmsg = "Completed with Error"; 1002 1.9.2.2 bouyer /*FALLTHROUGH*/ 1003 1.9.2.2 bouyer case CT_PHASE_ERROR: 1004 1.9.2.2 bouyer if (fmsg == NULL) 1005 1.9.2.2 bouyer fmsg = "Phase Sequence Error"; 1006 1.9.2.2 bouyer /*FALLTHROUGH*/ 1007 1.9.2.2 bouyer case CT_TERMINATED: 1008 1.9.2.2 bouyer if (fmsg == NULL) 1009 1.9.2.2 bouyer fmsg = "terminated by TERMINATE TRANSFER"; 1010 1.9.2.2 bouyer /*FALLTHROUGH*/ 1011 1.9.2.2 bouyer case CT_NOACK: 1012 1.9.2.2 bouyer if (fmsg == NULL) 1013 1.9.2.2 bouyer fmsg = "unacknowledged Immediate Notify pending"; 1014 1.9.2.2 bouyer 1015 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg); 1016 1.9.2.2 bouyer #if 0 1017 1.9.2.2 bouyer if (status & SENSEVALID) { 1018 1.9.2.2 bouyer bcopy((caddr_t) (cep + CTIO_SENSE_OFFSET), 1019 1.9.2.2 bouyer (caddr_t) &cdp->cd_sensedata, 1020 1.9.2.2 bouyer sizeof(scsi_sense_t)); 1021 1.9.2.2 bouyer cdp->cd_flags |= CDF_SENSEVALID; 1022 1.9.2.2 bouyer } 1023 1.9.2.2 bouyer #endif 1024 1.9.2.2 bouyer break; 1025 1.9.2.2 bouyer default: 1026 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x", 1027 1.9.2.2 bouyer ct->ct_status & ~QLTM_SVALID); 1028 1.9.2.2 bouyer break; 1029 1.9.2.2 bouyer } 1030 1.9.2.2 bouyer 1031 1.9.2.2 bouyer if (xs == NULL) { 1032 1.9.2.2 bouyer /* 1033 1.9.2.2 bouyer * There may be more than one CTIO for a data transfer, 1034 1.9.2.2 bouyer * or this may be a status CTIO we're not monitoring. 1035 1.9.2.2 bouyer * 1036 1.9.2.2 bouyer * The assumption is that they'll all be returned in the 1037 1.9.2.2 bouyer * order we got them. 1038 1.9.2.2 bouyer */ 1039 1.9.2.2 bouyer if (ct->ct_reserved == 0) { 1040 1.9.2.2 bouyer if ((ct->ct_flags & CT_SENDSTATUS) == 0) { 1041 1.9.2.2 bouyer isp_prt(isp, pl, 1042 1.9.2.2 bouyer "intermediate CTIO completed ok"); 1043 1.9.2.2 bouyer } else { 1044 1.9.2.2 bouyer isp_prt(isp, pl, 1045 1.9.2.2 bouyer "unmonitored CTIO completed ok"); 1046 1.9.2.2 bouyer } 1047 1.9.2.2 bouyer } else { 1048 1.9.2.2 bouyer isp_prt(isp, pl, 1049 1.9.2.2 bouyer "NO xs for CTIO (handle 0x%x) status 0x%x", 1050 1.9.2.2 bouyer ct->ct_reserved, ct->ct_status & ~QLTM_SVALID); 1051 1.9.2.2 bouyer } 1052 1.9.2.2 bouyer } else { 1053 1.9.2.2 bouyer if (ct->ct_flags & CT_SENDSTATUS) { 1054 1.9.2.2 bouyer /* 1055 1.9.2.2 bouyer * Sent status and command complete. 1056 1.9.2.2 bouyer * 1057 1.9.2.2 bouyer * We're now really done with this command, so we 1058 1.9.2.2 bouyer * punt to the platform dependent layers because 1059 1.9.2.2 bouyer * only there can we do the appropriate command 1060 1.9.2.2 bouyer * complete thread synchronization. 1061 1.9.2.2 bouyer */ 1062 1.9.2.2 bouyer isp_prt(isp, pl, "status CTIO complete"); 1063 1.9.2.2 bouyer } else { 1064 1.9.2.2 bouyer /* 1065 1.9.2.2 bouyer * Final CTIO completed. Release DMA resources and 1066 1.9.2.2 bouyer * notify platform dependent layers. 1067 1.9.2.2 bouyer */ 1068 1.9.2.2 bouyer isp_prt(isp, pl, "data CTIO complete"); 1069 1.9.2.2 bouyer ISP_DMAFREE(isp, xs, ct->ct_reserved); 1070 1.9.2.2 bouyer } 1071 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct); 1072 1.9.2.2 bouyer /* 1073 1.9.2.2 bouyer * The platform layer will destroy the handle if appropriate. 1074 1.9.2.2 bouyer */ 1075 1.9.2.2 bouyer } 1076 1.9.2.2 bouyer } 1077 1.9.2.2 bouyer 1078 1.9.2.2 bouyer static void 1079 1.9.2.2 bouyer isp_handle_ctio2(isp, ct) 1080 1.9.2.2 bouyer struct ispsoftc *isp; 1081 1.9.2.2 bouyer ct2_entry_t *ct; 1082 1.9.2.2 bouyer { 1083 1.9.2.2 bouyer XS_T *xs; 1084 1.9.2.2 bouyer int pl = ISP_LOGTDEBUG2; 1085 1.9.2.2 bouyer char *fmsg = NULL; 1086 1.9.2.2 bouyer 1087 1.9.2.2 bouyer if (ct->ct_reserved) { 1088 1.9.2.2 bouyer xs = isp_find_xs(isp, ct->ct_reserved); 1089 1.9.2.2 bouyer if (xs == NULL) 1090 1.9.2.2 bouyer pl = ISP_LOGALL; 1091 1.9.2.2 bouyer } else { 1092 1.9.2.2 bouyer pl = ISP_LOGTDEBUG1; 1093 1.9.2.2 bouyer xs = NULL; 1094 1.9.2.2 bouyer } 1095 1.9.2.2 bouyer 1096 1.9.2.2 bouyer switch(ct->ct_status & ~QLTM_SVALID) { 1097 1.9.2.2 bouyer case CT_OK: 1098 1.9.2.2 bouyer /* 1099 1.9.2.2 bouyer * There are generally 2 possibilities as to why we'd get 1100 1.9.2.2 bouyer * this condition: 1101 1.9.2.2 bouyer * We sent or received data. 1102 1.9.2.2 bouyer * We sent status & command complete. 1103 1.9.2.2 bouyer */ 1104 1.9.2.2 bouyer 1105 1.9.2.2 bouyer break; 1106 1.9.2.2 bouyer 1107 1.9.2.2 bouyer case CT_BDR_MSG: 1108 1.9.2.2 bouyer /* 1109 1.9.2.2 bouyer * Bus Device Reset message received or the SCSI Bus has 1110 1.9.2.2 bouyer * been Reset; the firmware has gone to Bus Free. 1111 1.9.2.2 bouyer * 1112 1.9.2.2 bouyer * The firmware generates an async mailbox interupt to 1113 1.9.2.2 bouyer * notify us of this and returns outstanding CTIOs with this 1114 1.9.2.2 bouyer * status. These CTIOs are handled in that same way as 1115 1.9.2.2 bouyer * CT_ABORTED ones, so just fall through here. 1116 1.9.2.2 bouyer */ 1117 1.9.2.2 bouyer fmsg = "Bus Device Reset"; 1118 1.9.2.2 bouyer /*FALLTHROUGH*/ 1119 1.9.2.2 bouyer case CT_RESET: 1120 1.9.2.2 bouyer if (fmsg == NULL) 1121 1.9.2.2 bouyer fmsg = "Bus Reset"; 1122 1.9.2.2 bouyer /*FALLTHROUGH*/ 1123 1.9.2.2 bouyer case CT_ABORTED: 1124 1.9.2.2 bouyer /* 1125 1.9.2.2 bouyer * When an Abort message is received the firmware goes to 1126 1.9.2.2 bouyer * Bus Free and returns all outstanding CTIOs with the status 1127 1.9.2.2 bouyer * set, then sends us an Immediate Notify entry. 1128 1.9.2.2 bouyer */ 1129 1.9.2.2 bouyer if (fmsg == NULL) 1130 1.9.2.2 bouyer fmsg = "ABORT TASK sent by Initiator"; 1131 1.9.2.2 bouyer 1132 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "CTIO2 destroyed by %s", fmsg); 1133 1.9.2.2 bouyer break; 1134 1.9.2.2 bouyer 1135 1.9.2.2 bouyer case CT_INVAL: 1136 1.9.2.2 bouyer /* 1137 1.9.2.2 bouyer * CTIO rejected by the firmware - invalid data direction. 1138 1.9.2.2 bouyer */ 1139 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "CTIO2 had wrong data directiond"); 1140 1.9.2.2 bouyer break; 1141 1.9.2.2 bouyer 1142 1.9.2.2 bouyer case CT_NOPATH: 1143 1.9.2.2 bouyer /* 1144 1.9.2.2 bouyer * CTIO rejected by the firmware due "no path for the 1145 1.9.2.2 bouyer * nondisconnecting nexus specified". This means that 1146 1.9.2.2 bouyer * we tried to access the bus while a non-disconnecting 1147 1.9.2.2 bouyer * command is in process. 1148 1.9.2.2 bouyer */ 1149 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 1150 1.9.2.2 bouyer "Firmware rejected CTIO2 for bad nexus %d->%d", 1151 1.9.2.2 bouyer ct->ct_iid, ct->ct_lun); 1152 1.9.2.2 bouyer break; 1153 1.9.2.2 bouyer 1154 1.9.2.2 bouyer case CT_RSELTMO: 1155 1.9.2.2 bouyer fmsg = "Reselection"; 1156 1.9.2.2 bouyer /*FALLTHROUGH*/ 1157 1.9.2.2 bouyer case CT_TIMEOUT: 1158 1.9.2.2 bouyer if (fmsg == NULL) 1159 1.9.2.2 bouyer fmsg = "Command"; 1160 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg); 1161 1.9.2.2 bouyer break; 1162 1.9.2.2 bouyer 1163 1.9.2.2 bouyer case CT_ERR: 1164 1.9.2.2 bouyer fmsg = "Completed with Error"; 1165 1.9.2.2 bouyer /*FALLTHROUGH*/ 1166 1.9.2.2 bouyer case CT_PHASE_ERROR: /* Bus phase sequence error */ 1167 1.9.2.2 bouyer if (fmsg == NULL) 1168 1.9.2.2 bouyer fmsg = "Phase Sequence Error"; 1169 1.9.2.2 bouyer /*FALLTHROUGH*/ 1170 1.9.2.2 bouyer case CT_TERMINATED: 1171 1.9.2.2 bouyer if (fmsg == NULL) 1172 1.9.2.2 bouyer fmsg = "terminated by TERMINATE TRANSFER"; 1173 1.9.2.2 bouyer /*FALLTHROUGH*/ 1174 1.9.2.2 bouyer case CT_LOGOUT: 1175 1.9.2.2 bouyer if (fmsg == NULL) 1176 1.9.2.2 bouyer fmsg = "Port Logout"; 1177 1.9.2.2 bouyer /*FALLTHROUGH*/ 1178 1.9.2.2 bouyer case CT_PORTNOTAVAIL: 1179 1.9.2.2 bouyer if (fmsg == NULL) 1180 1.9.2.2 bouyer fmsg = "Port not available"; 1181 1.9.2.2 bouyer case CT_NOACK: 1182 1.9.2.2 bouyer if (fmsg == NULL) 1183 1.9.2.2 bouyer fmsg = "unacknowledged Immediate Notify pending"; 1184 1.9.2.2 bouyer 1185 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg); 1186 1.9.2.2 bouyer #if 0 1187 1.9.2.2 bouyer if (status & SENSEVALID) { 1188 1.9.2.2 bouyer bcopy((caddr_t) (cep + CTIO_SENSE_OFFSET), 1189 1.9.2.2 bouyer (caddr_t) &cdp->cd_sensedata, 1190 1.9.2.2 bouyer sizeof(scsi_sense_t)); 1191 1.9.2.2 bouyer cdp->cd_flags |= CDF_SENSEVALID; 1192 1.9.2.2 bouyer } 1193 1.9.2.2 bouyer #endif 1194 1.9.2.2 bouyer break; 1195 1.9.2.2 bouyer 1196 1.9.2.2 bouyer case CT_INVRXID: 1197 1.9.2.2 bouyer /* 1198 1.9.2.2 bouyer * CTIO rejected by the firmware because an invalid RX_ID. 1199 1.9.2.2 bouyer * Just print a message. 1200 1.9.2.2 bouyer */ 1201 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, 1202 1.9.2.2 bouyer "CTIO2 completed with Invalid RX_ID 0x%x", ct->ct_rxid); 1203 1.9.2.2 bouyer break; 1204 1.9.2.2 bouyer 1205 1.9.2.2 bouyer default: 1206 1.9.2.2 bouyer isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x", 1207 1.9.2.2 bouyer ct->ct_status & ~QLTM_SVALID); 1208 1.9.2.2 bouyer break; 1209 1.9.2.2 bouyer } 1210 1.9.2.2 bouyer 1211 1.9.2.2 bouyer if (xs == NULL) { 1212 1.9.2.2 bouyer /* 1213 1.9.2.2 bouyer * There may be more than one CTIO for a data transfer, 1214 1.9.2.2 bouyer * or this may be a status CTIO we're not monitoring. 1215 1.9.2.2 bouyer * 1216 1.9.2.2 bouyer * The assumption is that they'll all be returned in the 1217 1.9.2.2 bouyer * order we got them. 1218 1.9.2.2 bouyer */ 1219 1.9.2.2 bouyer if (ct->ct_reserved == 0) { 1220 1.9.2.2 bouyer if ((ct->ct_flags & CT_SENDSTATUS) == 0) { 1221 1.9.2.2 bouyer isp_prt(isp, pl, 1222 1.9.2.2 bouyer "intermediate CTIO completed ok"); 1223 1.9.2.2 bouyer } else { 1224 1.9.2.2 bouyer isp_prt(isp, pl, 1225 1.9.2.2 bouyer "unmonitored CTIO completed ok"); 1226 1.9.2.2 bouyer } 1227 1.9.2.2 bouyer } else { 1228 1.9.2.2 bouyer isp_prt(isp, pl, 1229 1.9.2.2 bouyer "NO xs for CTIO (handle 0x%x) status 0x%x", 1230 1.9.2.2 bouyer ct->ct_reserved, ct->ct_status & ~QLTM_SVALID); 1231 1.9.2.2 bouyer } 1232 1.9.2.2 bouyer } else { 1233 1.9.2.2 bouyer if (ct->ct_flags & CT_SENDSTATUS) { 1234 1.9.2.2 bouyer /* 1235 1.9.2.2 bouyer * Sent status and command complete. 1236 1.9.2.2 bouyer * 1237 1.9.2.2 bouyer * We're now really done with this command, so we 1238 1.9.2.2 bouyer * punt to the platform dependent layers because 1239 1.9.2.2 bouyer * only there can we do the appropriate command 1240 1.9.2.2 bouyer * complete thread synchronization. 1241 1.9.2.2 bouyer */ 1242 1.9.2.2 bouyer isp_prt(isp, pl, "status CTIO complete"); 1243 1.9.2.2 bouyer } else { 1244 1.9.2.2 bouyer /* 1245 1.9.2.2 bouyer * Final CTIO completed. Release DMA resources and 1246 1.9.2.2 bouyer * notify platform dependent layers. 1247 1.9.2.2 bouyer */ 1248 1.9.2.2 bouyer isp_prt(isp, pl, "data CTIO complete"); 1249 1.9.2.2 bouyer ISP_DMAFREE(isp, xs, ct->ct_reserved); 1250 1.9.2.2 bouyer } 1251 1.9.2.2 bouyer (void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct); 1252 1.9.2.2 bouyer /* 1253 1.9.2.2 bouyer * The platform layer will destroy the handle if appropriate. 1254 1.9.2.2 bouyer */ 1255 1.9.2.2 bouyer } 1256 1.9.2.2 bouyer } 1257 1.9.2.2 bouyer #endif 1258
Indexes created Fri Oct 03 02:09:57 GMT 2025