malo.c revision 1.4
1 /* $NetBSD: malo.c,v 1.4 2016/03/11 18:33:18 christos Exp $ */ 2 /* $OpenBSD: malo.c,v 1.92 2010/08/27 17:08:00 jsg Exp $ */ 3 4 /* 5 * Copyright (c) 2006 Claudio Jeker <claudio (at) openbsd.org> 6 * Copyright (c) 2006 Marcus Glocker <mglocker (at) openbsd.org> 7 * 8 * Permission to use, copy, modify, and distribute this software for any 9 * purpose with or without fee is hereby granted, provided that the above 10 * copyright notice and this permission notice appear in all copies. 11 * 12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 19 */ 20 21 #include <sys/cdefs.h> 22 __KERNEL_RCSID(0, "$NetBSD: malo.c,v 1.4 2016/03/11 18:33:18 christos Exp $"); 23 24 #include <sys/param.h> 25 #include <sys/types.h> 26 27 #include <sys/device.h> 28 #include <sys/kernel.h> 29 #include <sys/malloc.h> 30 #include <sys/mbuf.h> 31 #include <sys/proc.h> 32 #include <sys/socket.h> 33 #include <sys/sockio.h> 34 #include <sys/systm.h> 35 #include <sys/bus.h> 36 37 #include <machine/endian.h> 38 #include <machine/intr.h> 39 40 #include <net/if.h> 41 #include <net/if_media.h> 42 #include <net/if_ether.h> 43 44 #include <net/bpf.h> 45 46 #include <netinet/in.h> 47 #include <netinet/in_systm.h> 48 49 #include <net80211/ieee80211_var.h> 50 #include <net80211/ieee80211_radiotap.h> 51 52 #include <dev/firmload.h> 53 54 #include <dev/ic/malovar.h> 55 #include <dev/ic/maloreg.h> 56 57 #ifdef MALO_DEBUG 58 int malo_d = 2; 59 #define DPRINTF(l, x...) do { if ((l) <= malo_d) printf(x); } while (0) 60 #else 61 #define DPRINTF(l, x...) 62 #endif 63 64 /* internal structures and defines */ 65 struct malo_node { 66 struct ieee80211_node ni; 67 }; 68 69 struct malo_rx_data { 70 bus_dmamap_t map; 71 struct mbuf *m; 72 }; 73 74 struct malo_tx_data { 75 bus_dmamap_t map; 76 struct mbuf *m; 77 uint32_t softstat; 78 struct ieee80211_node *ni; 79 }; 80 81 /* RX descriptor used by HW */ 82 struct malo_rx_desc { 83 uint8_t rxctrl; 84 uint8_t rssi; 85 uint8_t status; 86 uint8_t channel; 87 uint16_t len; 88 uint8_t reserved1; /* actually unused */ 89 uint8_t datarate; 90 uint32_t physdata; /* DMA address of data */ 91 uint32_t physnext; /* DMA address of next control block */ 92 uint16_t qosctrl; 93 uint16_t reserved2; 94 } __packed; 95 96 /* TX descriptor used by HW */ 97 struct malo_tx_desc { 98 uint32_t status; 99 #define MALO_TXD_STATUS_IDLE 0x00000000 100 #define MALO_TXD_STATUS_USED 0x00000001 101 #define MALO_TXD_STATUS_OK 0x00000001 102 #define MALO_TXD_STATUS_OK_RETRY 0x00000002 103 #define MALO_TXD_STATUS_OK_MORE_RETRY 0x00000004 104 #define MALO_TXD_STATUS_MULTICAST_TX 0x00000008 105 #define MALO_TXD_STATUS_BROADCAST_TX 0x00000010 106 #define MALO_TXD_STATUS_FAILED_LINK_ERROR 0x00000020 107 #define MALO_TXD_STATUS_FAILED_EXCEED_LIMIT 0x00000040 108 #define MALO_TXD_STATUS_FAILED_XRETRY MALO_TXD_STATUS_FAILED_EXCEED_LIMIT 109 #define MALO_TXD_STATUS_FAILED_AGING 0x00000080 110 #define MALO_TXD_STATUS_FW_OWNED 0x80000000 111 uint8_t datarate; 112 uint8_t txpriority; 113 uint16_t qosctrl; 114 uint32_t physdata; /* DMA address of data */ 115 uint16_t len; 116 uint8_t destaddr[6]; 117 uint32_t physnext; /* DMA address of next control block */ 118 uint32_t reserved1; /* SAP packet info ??? */ 119 uint32_t reserved2; 120 } __packed; 121 122 #define MALO_RX_RING_COUNT 256 123 #define MALO_TX_RING_COUNT 256 124 #define MALO_MAX_SCATTER 8 /* XXX unknown, wild guess */ 125 #define MALO_CMD_TIMEOUT 50 /* MALO_CMD_TIMEOUT * 100us */ 126 127 /* 128 * Firmware commands 129 */ 130 #define MALO_CMD_GET_HW_SPEC 0x0003 131 #define MALO_CMD_SET_RADIO 0x001c 132 #define MALO_CMD_SET_AID 0x010d 133 #define MALO_CMD_SET_TXPOWER 0x001e 134 #define MALO_CMD_SET_ANTENNA 0x0020 135 #define MALO_CMD_SET_PRESCAN 0x0107 136 #define MALO_CMD_SET_POSTSCAN 0x0108 137 #define MALO_CMD_SET_RATE 0x0110 138 #define MALO_CMD_SET_CHANNEL 0x010a 139 #define MALO_CMD_SET_RTS 0x0113 140 #define MALO_CMD_SET_SLOT 0x0114 141 #define MALO_CMD_RESPONSE 0x8000 142 143 #define MALO_CMD_RESULT_OK 0x0000 /* everything is fine */ 144 #define MALO_CMD_RESULT_ERROR 0x0001 /* general error */ 145 #define MALO_CMD_RESULT_NOSUPPORT 0x0002 /* command not valid */ 146 #define MALO_CMD_RESULT_PENDING 0x0003 /* will be processed */ 147 #define MALO_CMD_RESULT_BUSY 0x0004 /* command ignored */ 148 #define MALO_CMD_RESULT_PARTIALDATA 0x0005 /* buffer too small */ 149 150 struct malo_cmdheader { 151 uint16_t cmd; 152 uint16_t size; /* size of the command, incl. header */ 153 uint16_t seqnum; /* seems not to matter that much */ 154 uint16_t result; /* set to 0 on request */ 155 /* following the data payload, up to 256 bytes */ 156 }; 157 158 struct malo_hw_spec { 159 uint16_t HwVersion; 160 uint16_t NumOfWCB; 161 uint16_t NumOfMCastAdr; 162 uint8_t PermanentAddress[6]; 163 uint16_t RegionCode; 164 uint16_t NumberOfAntenna; 165 uint32_t FWReleaseNumber; 166 uint32_t WcbBase0; 167 uint32_t RxPdWrPtr; 168 uint32_t RxPdRdPtr; 169 uint32_t CookiePtr; 170 uint32_t WcbBase1; 171 uint32_t WcbBase2; 172 uint32_t WcbBase3; 173 } __packed; 174 175 struct malo_cmd_radio { 176 uint16_t action; 177 uint16_t preamble_mode; 178 uint16_t enable; 179 } __packed; 180 181 struct malo_cmd_aid { 182 uint16_t associd; 183 uint8_t macaddr[6]; 184 uint32_t gprotection; 185 uint8_t aprates[14]; 186 } __packed; 187 188 struct malo_cmd_txpower { 189 uint16_t action; 190 uint16_t supportpowerlvl; 191 uint16_t currentpowerlvl; 192 uint16_t reserved; 193 uint16_t powerlvllist[8]; 194 } __packed; 195 196 struct malo_cmd_antenna { 197 uint16_t action; 198 uint16_t mode; 199 } __packed; 200 201 struct malo_cmd_postscan { 202 uint32_t isibss; 203 uint8_t bssid[6]; 204 } __packed; 205 206 struct malo_cmd_channel { 207 uint16_t action; 208 uint8_t channel; 209 } __packed; 210 211 struct malo_cmd_rate { 212 uint8_t dataratetype; 213 uint8_t rateindex; 214 uint8_t aprates[14]; 215 } __packed; 216 217 struct malo_cmd_rts { 218 uint16_t action; 219 uint32_t threshold; 220 } __packed; 221 222 struct malo_cmd_slot { 223 uint16_t action; 224 uint8_t slot; 225 } __packed; 226 227 #define malo_mem_write4(sc, off, x) \ 228 bus_space_write_4((sc)->sc_mem1_bt, (sc)->sc_mem1_bh, (off), (x)) 229 #define malo_mem_write2(sc, off, x) \ 230 bus_space_write_2((sc)->sc_mem1_bt, (sc)->sc_mem1_bh, (off), (x)) 231 #define malo_mem_write1(sc, off, x) \ 232 bus_space_write_1((sc)->sc_mem1_bt, (sc)->sc_mem1_bh, (off), (x)) 233 234 #define malo_mem_read4(sc, off) \ 235 bus_space_read_4((sc)->sc_mem1_bt, (sc)->sc_mem1_bh, (off)) 236 #define malo_mem_read1(sc, off) \ 237 bus_space_read_1((sc)->sc_mem1_bt, (sc)->sc_mem1_bh, (off)) 238 239 #define malo_ctl_write4(sc, off, x) \ 240 bus_space_write_4((sc)->sc_mem2_bt, (sc)->sc_mem2_bh, (off), (x)) 241 #define malo_ctl_read4(sc, off) \ 242 bus_space_read_4((sc)->sc_mem2_bt, (sc)->sc_mem2_bh, (off)) 243 #define malo_ctl_read1(sc, off) \ 244 bus_space_read_1((sc)->sc_mem2_bt, (sc)->sc_mem2_bh, (off)) 245 246 #define malo_ctl_barrier(sc, t) \ 247 bus_space_barrier((sc)->sc_mem2_bt, (sc)->sc_mem2_bh, 0x0c00, 0xff, (t)) 248 249 static int malo_alloc_cmd(struct malo_softc *sc); 250 static void malo_free_cmd(struct malo_softc *sc); 251 static void malo_send_cmd(struct malo_softc *sc, bus_addr_t addr); 252 static int malo_send_cmd_dma(struct malo_softc *sc, bus_addr_t addr); 253 static int malo_alloc_rx_ring(struct malo_softc *sc, struct malo_rx_ring *ring, 254 int count); 255 static void malo_reset_rx_ring(struct malo_softc *sc, struct malo_rx_ring *ring); 256 static void malo_free_rx_ring(struct malo_softc *sc, struct malo_rx_ring *ring); 257 static int malo_alloc_tx_ring(struct malo_softc *sc, struct malo_tx_ring *ring, 258 int count); 259 static void malo_reset_tx_ring(struct malo_softc *sc, struct malo_tx_ring *ring); 260 static void malo_free_tx_ring(struct malo_softc *sc, struct malo_tx_ring *ring); 261 static int malo_ioctl(struct ifnet *ifp, u_long cmd, void* data); 262 static void malo_start(struct ifnet *ifp); 263 static void malo_watchdog(struct ifnet *ifp); 264 static int malo_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, 265 int arg); 266 static void malo_newassoc(struct ieee80211_node *ni, int isnew); 267 static struct ieee80211_node * 268 malo_node_alloc(struct ieee80211_node_table *nt); 269 static int malo_media_change(struct ifnet *ifp); 270 static void malo_media_status(struct ifnet *ifp, struct ifmediareq *imr); 271 static int malo_chip2rate(int chip_rate); 272 static int malo_fix2rate(int fix_rate); 273 static void malo_next_scan(void *arg); 274 static void malo_tx_intr(struct malo_softc *sc); 275 static int malo_tx_data(struct malo_softc *sc, struct mbuf *m0, 276 struct ieee80211_node *ni); 277 static void malo_tx_setup_desc(struct malo_softc *sc, struct malo_tx_desc *desc, 278 int len, int rate, const bus_dma_segment_t *segs, int nsegs); 279 static void malo_rx_intr(struct malo_softc *sc); 280 static int malo_load_bootimg(struct malo_softc *sc); 281 static int malo_load_firmware(struct malo_softc *sc); 282 283 static int malo_set_slot(struct malo_softc *sc); 284 static void malo_update_slot(struct ifnet* ifp); 285 #ifdef MALO_DEBUG 286 static void malo_hexdump(void *buf, int len); 287 #endif 288 static const char *malo_cmd_string(uint16_t cmd); 289 static const char *malo_cmd_string_result(uint16_t result); 290 static int malo_cmd_get_spec(struct malo_softc *sc); 291 static int malo_cmd_set_prescan(struct malo_softc *sc); 292 static int malo_cmd_set_postscan(struct malo_softc *sc, uint8_t *macaddr, 293 uint8_t ibsson); 294 static int malo_cmd_set_channel(struct malo_softc *sc, struct ieee80211_channel *chan); 295 static int malo_cmd_set_antenna(struct malo_softc *sc, uint16_t antenna_type); 296 static int malo_cmd_set_radio(struct malo_softc *sc, uint16_t mode, 297 uint16_t preamble); 298 static int malo_cmd_set_aid(struct malo_softc *sc, uint8_t *bssid, 299 uint16_t associd); 300 static int malo_cmd_set_txpower(struct malo_softc *sc, unsigned int powerlevel); 301 static int malo_cmd_set_rts(struct malo_softc *sc, uint32_t threshold); 302 static int malo_cmd_set_slot(struct malo_softc *sc, uint8_t slot); 303 static int malo_cmd_set_rate(struct malo_softc *sc, uint8_t rate); 304 static void malo_cmd_response(struct malo_softc *sc); 305 306 int 307 malo_intr(void *arg) 308 { 309 struct malo_softc *sc = arg; 310 uint32_t status; 311 312 status = malo_ctl_read4(sc, MALO_REG_A2H_INTERRUPT_CAUSE); 313 if (status == 0xffffffff || status == 0) 314 /* not for us */ 315 return (0); 316 317 if (status & MALO_A2HRIC_BIT_TX_DONE) 318 malo_tx_intr(sc); 319 if (status & MALO_A2HRIC_BIT_RX_RDY) 320 malo_rx_intr(sc); 321 if (status & MALO_A2HRIC_BIT_OPC_DONE) { 322 /* XXX cmd done interrupt handling doesn't work yet */ 323 DPRINTF(1, "%s: got cmd done interrupt\n", device_xname(sc->sc_dev)); 324 //malo_cmd_response(sc); 325 } 326 327 if (status & ~0x7) { 328 DPRINTF(1, "%s: unknown interrupt %x\n", 329 device_xname(sc->sc_dev), status); 330 } 331 332 /* just ack the interrupt */ 333 malo_ctl_write4(sc, MALO_REG_A2H_INTERRUPT_CAUSE, 0); 334 335 return (1); 336 } 337 338 int 339 malo_attach(struct malo_softc *sc) 340 { 341 struct ieee80211com *ic = &sc->sc_ic; 342 struct ifnet *ifp = &sc->sc_if; 343 int i; 344 345 /* initialize channel scanning timer */ 346 callout_init(&sc->sc_scan_to, 0); 347 callout_setfunc(&sc->sc_scan_to, malo_next_scan, sc); 348 349 /* allocate DMA structures */ 350 malo_alloc_cmd(sc); 351 malo_alloc_rx_ring(sc, &sc->sc_rxring, MALO_RX_RING_COUNT); 352 malo_alloc_tx_ring(sc, &sc->sc_txring, MALO_TX_RING_COUNT); 353 354 /* setup interface */ 355 ifp->if_softc = sc; 356 ifp->if_init = malo_init; 357 ifp->if_stop = malo_stop; 358 ifp->if_ioctl = malo_ioctl; 359 ifp->if_start = malo_start; 360 ifp->if_watchdog = malo_watchdog; 361 ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; 362 memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 363 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); 364 IFQ_SET_READY(&ifp->if_snd); 365 366 /* set supported rates */ 367 ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b; 368 ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g; 369 sc->sc_last_txrate = -1; 370 371 /* set channels */ 372 for (i = 1; i <= 14; i++) { 373 ic->ic_channels[i].ic_freq = 374 ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); 375 ic->ic_channels[i].ic_flags = 376 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | 377 IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; 378 } 379 380 /* OpenBSD supports IEEE80211_C_RSN too */ 381 /* set the rest */ 382 ic->ic_ifp = ifp; 383 ic->ic_caps = 384 IEEE80211_C_IBSS | 385 IEEE80211_C_MONITOR | 386 IEEE80211_C_SHPREAMBLE | 387 IEEE80211_C_SHSLOT | 388 IEEE80211_C_WEP | 389 IEEE80211_C_WPA; 390 ic->ic_opmode = IEEE80211_M_STA; 391 ic->ic_state = IEEE80211_S_INIT; 392 for (i = 0; i < 6; i++) 393 ic->ic_myaddr[i] = malo_ctl_read1(sc, 0xa528 + i); 394 395 /* show our mac address */ 396 aprint_normal(", address %s\n", ether_sprintf(ic->ic_myaddr)); 397 398 /* attach interface */ 399 if_attach(ifp); 400 ieee80211_ifattach(ic); 401 402 /* post attach vector functions */ 403 sc->sc_newstate = ic->ic_newstate; 404 ic->ic_newstate = malo_newstate; 405 ic->ic_newassoc = malo_newassoc; 406 ic->ic_node_alloc = malo_node_alloc; 407 ic->ic_updateslot = malo_update_slot; 408 409 ieee80211_media_init(ic, malo_media_change, malo_media_status); 410 411 bpf_attach2(ifp, DLT_IEEE802_11_RADIO, 412 sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN, 413 &sc->sc_drvbpf); 414 415 sc->sc_rxtap_len = sizeof(sc->sc_rxtapu); 416 sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); 417 sc->sc_rxtap.wr_ihdr.it_present = htole32(MALO_RX_RADIOTAP_PRESENT); 418 419 sc->sc_txtap_len = sizeof(sc->sc_txtapu); 420 sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); 421 sc->sc_txtap.wt_ihdr.it_present = htole32(MALO_TX_RADIOTAP_PRESENT); 422 423 ieee80211_announce(ic); 424 425 return (0); 426 } 427 428 int 429 malo_detach(void *arg) 430 { 431 struct malo_softc *sc = arg; 432 struct ieee80211com *ic = &sc->sc_ic; 433 struct ifnet *ifp = &sc->sc_if; 434 435 /* remove channel scanning timer */ 436 callout_stop(&sc->sc_scan_to); 437 438 malo_stop(ifp, 1); 439 ieee80211_ifdetach(ic); 440 if_detach(ifp); 441 malo_free_cmd(sc); 442 malo_free_rx_ring(sc, &sc->sc_rxring); 443 malo_free_tx_ring(sc, &sc->sc_txring); 444 445 return (0); 446 } 447 448 static int 449 malo_alloc_cmd(struct malo_softc *sc) 450 { 451 int error, nsegs; 452 453 error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, 454 PAGE_SIZE, 0, BUS_DMA_ALLOCNOW, &sc->sc_cmd_dmam); 455 if (error != 0) { 456 aprint_error_dev(sc->sc_dev, "can not create DMA tag\n"); 457 return (-1); 458 } 459 460 error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 461 0, &sc->sc_cmd_dmas, 1, &nsegs, BUS_DMA_WAITOK); 462 if (error != 0) { 463 aprint_error_dev(sc->sc_dev, "error alloc dma memory\n"); 464 return (-1); 465 } 466 467 error = bus_dmamem_map(sc->sc_dmat, &sc->sc_cmd_dmas, nsegs, 468 PAGE_SIZE, (void **)&sc->sc_cmd_mem, BUS_DMA_WAITOK); 469 if (error != 0) { 470 aprint_error_dev(sc->sc_dev, "error map dma memory\n"); 471 return (-1); 472 } 473 474 error = bus_dmamap_load(sc->sc_dmat, sc->sc_cmd_dmam, 475 sc->sc_cmd_mem, PAGE_SIZE, NULL, BUS_DMA_NOWAIT); 476 if (error != 0) { 477 aprint_error_dev(sc->sc_dev, "error load dma memory\n"); 478 bus_dmamem_free(sc->sc_dmat, &sc->sc_cmd_dmas, nsegs); 479 return (-1); 480 } 481 482 sc->sc_cookie = sc->sc_cmd_mem; 483 *sc->sc_cookie = htole32(0xaa55aa55); 484 sc->sc_cmd_mem = ((char*)sc->sc_cmd_mem) + sizeof(uint32_t); 485 sc->sc_cookie_dmaaddr = sc->sc_cmd_dmam->dm_segs[0].ds_addr; 486 sc->sc_cmd_dmaaddr = sc->sc_cmd_dmam->dm_segs[0].ds_addr + 487 sizeof(uint32_t); 488 489 return (0); 490 } 491 492 static void 493 malo_free_cmd(struct malo_softc *sc) 494 { 495 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 496 BUS_DMASYNC_POSTWRITE); 497 bus_dmamap_unload(sc->sc_dmat, sc->sc_cmd_dmam); 498 bus_dmamem_unmap(sc->sc_dmat, sc->sc_cookie, PAGE_SIZE); 499 bus_dmamem_free(sc->sc_dmat, &sc->sc_cmd_dmas, 1); 500 } 501 502 static void 503 malo_send_cmd(struct malo_softc *sc, bus_addr_t addr) 504 { 505 malo_ctl_write4(sc, MALO_REG_GEN_PTR, (uint32_t)addr); 506 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_WRITE); 507 malo_ctl_write4(sc, MALO_REG_H2A_INTERRUPT_EVENTS, 2); /* CPU_TRANSFER_CMD */ 508 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_WRITE); 509 } 510 511 static int 512 malo_send_cmd_dma(struct malo_softc *sc, bus_addr_t addr) 513 { 514 int i; 515 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 516 517 malo_send_cmd(sc, addr); 518 519 for (i = 0; i < MALO_CMD_TIMEOUT; i++) { 520 delay(100); 521 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 522 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 523 if (hdr->cmd & htole16(0x8000)) 524 break; 525 } 526 if (i == MALO_CMD_TIMEOUT) { 527 aprint_error_dev(sc->sc_dev, "timeout while waiting for cmd response!\n"); 528 return (ETIMEDOUT); 529 } 530 531 malo_cmd_response(sc); 532 533 return (0); 534 } 535 536 static int 537 malo_alloc_rx_ring(struct malo_softc *sc, struct malo_rx_ring *ring, int count) 538 { 539 struct malo_rx_desc *desc; 540 struct malo_rx_data *data; 541 int i, nsegs, error; 542 543 ring->count = count; 544 ring->cur = ring->next = 0; 545 546 error = bus_dmamap_create(sc->sc_dmat, 547 count * sizeof(struct malo_rx_desc), 1, 548 count * sizeof(struct malo_rx_desc), 0, 549 BUS_DMA_NOWAIT, &ring->map); 550 if (error != 0) { 551 aprint_error_dev(sc->sc_dev, "could not create desc DMA map\n"); 552 goto fail; 553 } 554 555 error = bus_dmamem_alloc(sc->sc_dmat, 556 count * sizeof(struct malo_rx_desc), 557 PAGE_SIZE, 0, &ring->seg, 1, &nsegs, BUS_DMA_NOWAIT); 558 559 if (error != 0) { 560 aprint_error_dev(sc->sc_dev, "could not allocate DMA memory\n"); 561 goto fail; 562 } 563 564 error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, 565 count * sizeof(struct malo_rx_desc), (void **)&ring->desc, 566 BUS_DMA_NOWAIT); 567 if (error != 0) { 568 aprint_error_dev(sc->sc_dev, "can't map desc DMA memory\n"); 569 goto fail; 570 } 571 572 error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->desc, 573 count * sizeof(struct malo_rx_desc), NULL, BUS_DMA_NOWAIT); 574 if (error != 0) { 575 aprint_error_dev(sc->sc_dev, "could not load desc DMA map\n"); 576 goto fail; 577 } 578 579 ring->physaddr = ring->map->dm_segs->ds_addr; 580 581 ring->data = malloc(count * sizeof (struct malo_rx_data), M_DEVBUF, 582 M_NOWAIT); 583 if (ring->data == NULL) { 584 aprint_error_dev(sc->sc_dev, "could not allocate soft data\n"); 585 error = ENOMEM; 586 goto fail; 587 } 588 589 /* 590 * Pre-allocate Rx buffers and populate Rx ring. 591 */ 592 memset(ring->data, 0, count * sizeof (struct malo_rx_data)); 593 for (i = 0; i < count; i++) { 594 desc = &ring->desc[i]; 595 data = &ring->data[i]; 596 597 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 598 0, BUS_DMA_NOWAIT, &data->map); 599 if (error != 0) { 600 aprint_error_dev(sc->sc_dev, "could not create DMA map\n"); 601 goto fail; 602 } 603 604 MGETHDR(data->m, M_DONTWAIT, MT_DATA); 605 if (data->m == NULL) { 606 aprint_error_dev(sc->sc_dev, "could not allocate rx mbuf\n"); 607 error = ENOMEM; 608 goto fail; 609 } 610 611 MCLGET(data->m, M_DONTWAIT); 612 if (!(data->m->m_flags & M_EXT)) { 613 aprint_error_dev(sc->sc_dev, "could not allocate rx mbuf cluster\n"); 614 error = ENOMEM; 615 goto fail; 616 } 617 618 error = bus_dmamap_load(sc->sc_dmat, data->map, 619 mtod(data->m, void *), MCLBYTES, NULL, BUS_DMA_NOWAIT); 620 if (error != 0) { 621 aprint_error_dev(sc->sc_dev, "could not load rx buf DMA map"); 622 goto fail; 623 } 624 625 desc->status = htole16(1); 626 desc->physdata = htole32(data->map->dm_segs->ds_addr); 627 desc->physnext = htole32(ring->physaddr + 628 (i + 1) % count * sizeof(struct malo_rx_desc)); 629 } 630 631 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 632 BUS_DMASYNC_PREWRITE); 633 634 return (0); 635 636 fail: malo_free_rx_ring(sc, ring); 637 return (error); 638 } 639 640 static void 641 malo_reset_rx_ring(struct malo_softc *sc, struct malo_rx_ring *ring) 642 { 643 int i; 644 645 for (i = 0; i < ring->count; i++) 646 ring->desc[i].status = 0; 647 648 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 649 BUS_DMASYNC_PREWRITE); 650 651 ring->cur = ring->next = 0; 652 } 653 654 static void 655 malo_free_rx_ring(struct malo_softc *sc, struct malo_rx_ring *ring) 656 { 657 struct malo_rx_data *data; 658 int i; 659 660 if (ring->desc != NULL) { 661 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, 662 ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 663 bus_dmamap_unload(sc->sc_dmat, ring->map); 664 bus_dmamem_unmap(sc->sc_dmat, ring->desc, 665 ring->count * sizeof(struct malo_rx_desc)); 666 bus_dmamem_free(sc->sc_dmat, &ring->seg, 1); 667 } 668 669 if (ring->data != NULL) { 670 for (i = 0; i < ring->count; i++) { 671 data = &ring->data[i]; 672 673 if (data->m != NULL) { 674 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 675 data->map->dm_mapsize, 676 BUS_DMASYNC_POSTREAD); 677 bus_dmamap_unload(sc->sc_dmat, data->map); 678 m_freem(data->m); 679 } 680 681 if (data->map != NULL) 682 bus_dmamap_destroy(sc->sc_dmat, data->map); 683 } 684 free(ring->data, M_DEVBUF); 685 } 686 } 687 688 static int 689 malo_alloc_tx_ring(struct malo_softc *sc, struct malo_tx_ring *ring, 690 int count) 691 { 692 int i, nsegs, error; 693 694 ring->count = count; 695 ring->queued = 0; 696 ring->cur = ring->next = ring->stat = 0; 697 698 error = bus_dmamap_create(sc->sc_dmat, 699 count * sizeof(struct malo_tx_desc), 1, 700 count * sizeof(struct malo_tx_desc), 0, BUS_DMA_NOWAIT, &ring->map); 701 if (error != 0) { 702 aprint_error_dev(sc->sc_dev, "could not create desc DMA map\n"); 703 goto fail; 704 } 705 706 error = bus_dmamem_alloc(sc->sc_dmat, 707 count * sizeof(struct malo_tx_desc), PAGE_SIZE, 0, 708 &ring->seg, 1, &nsegs, BUS_DMA_NOWAIT); 709 if (error != 0) { 710 aprint_error_dev(sc->sc_dev, "could not allocate DMA memory\n"); 711 goto fail; 712 } 713 714 error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, 715 count * sizeof(struct malo_tx_desc), (void **)&ring->desc, 716 BUS_DMA_NOWAIT); 717 if (error != 0) { 718 aprint_error_dev(sc->sc_dev, "can't map desc DMA memory\n"); 719 goto fail; 720 } 721 722 error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->desc, 723 count * sizeof(struct malo_tx_desc), NULL, BUS_DMA_NOWAIT); 724 if (error != 0) { 725 aprint_error_dev(sc->sc_dev, "could not load desc DMA map\n"); 726 goto fail; 727 } 728 729 ring->physaddr = ring->map->dm_segs->ds_addr; 730 731 ring->data = malloc(count * sizeof(struct malo_tx_data), M_DEVBUF, 732 M_NOWAIT); 733 if (ring->data == NULL) { 734 aprint_error_dev(sc->sc_dev, "could not allocate soft data\n"); 735 error = ENOMEM; 736 goto fail; 737 } 738 739 memset(ring->data, 0, count * sizeof(struct malo_tx_data)); 740 for (i = 0; i < count; i++) { 741 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 742 MALO_MAX_SCATTER, MCLBYTES, 0, BUS_DMA_NOWAIT, 743 &ring->data[i].map); 744 if (error != 0) { 745 aprint_error_dev(sc->sc_dev, "could not create DMA map\n"); 746 goto fail; 747 } 748 ring->desc[i].physnext = htole32(ring->physaddr + 749 (i + 1) % count * sizeof(struct malo_tx_desc)); 750 } 751 752 return (0); 753 754 fail: malo_free_tx_ring(sc, ring); 755 return (error); 756 } 757 758 static void 759 malo_reset_tx_ring(struct malo_softc *sc, struct malo_tx_ring *ring) 760 { 761 struct malo_tx_desc *desc; 762 struct malo_tx_data *data; 763 int i; 764 765 for (i = 0; i < ring->count; i++) { 766 desc = &ring->desc[i]; 767 data = &ring->data[i]; 768 769 if (data->m != NULL) { 770 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 771 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 772 bus_dmamap_unload(sc->sc_dmat, data->map); 773 m_freem(data->m); 774 data->m = NULL; 775 } 776 777 /* 778 * The node has already been freed at that point so don't call 779 * ieee80211_release_node() here. 780 */ 781 data->ni = NULL; 782 783 desc->status = 0; 784 } 785 786 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 787 BUS_DMASYNC_PREWRITE); 788 789 ring->queued = 0; 790 ring->cur = ring->next = ring->stat = 0; 791 } 792 793 static void 794 malo_free_tx_ring(struct malo_softc *sc, struct malo_tx_ring *ring) 795 { 796 struct malo_tx_data *data; 797 int i; 798 799 if (ring->desc != NULL) { 800 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, 801 ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 802 bus_dmamap_unload(sc->sc_dmat, ring->map); 803 bus_dmamem_unmap(sc->sc_dmat, ring->desc, 804 ring->count * sizeof(struct malo_tx_desc)); 805 bus_dmamem_free(sc->sc_dmat, &ring->seg, 1); 806 } 807 808 if (ring->data != NULL) { 809 for (i = 0; i < ring->count; i++) { 810 data = &ring->data[i]; 811 812 if (data->m != NULL) { 813 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 814 data->map->dm_mapsize, 815 BUS_DMASYNC_POSTWRITE); 816 bus_dmamap_unload(sc->sc_dmat, data->map); 817 m_freem(data->m); 818 } 819 820 /* 821 * The node has already been freed at that point so 822 * don't call ieee80211_release_node() here. 823 */ 824 data->ni = NULL; 825 826 if (data->map != NULL) 827 bus_dmamap_destroy(sc->sc_dmat, data->map); 828 } 829 free(ring->data, M_DEVBUF); 830 } 831 } 832 833 int 834 malo_init(struct ifnet *ifp) 835 { 836 struct malo_softc *sc = ifp->if_softc; 837 struct ieee80211com *ic = &sc->sc_ic; 838 int error; 839 840 DPRINTF(1, "%s: %s\n", ifp->if_xname, __func__); 841 842 /* if interface already runs stop it first */ 843 if (ifp->if_flags & IFF_RUNNING) 844 malo_stop(ifp, 1); 845 846 /* power on cardbus socket */ 847 if (sc->sc_enable) 848 sc->sc_enable(sc); 849 850 /* disable interrupts */ 851 malo_ctl_read4(sc, MALO_REG_A2H_INTERRUPT_CAUSE); 852 malo_ctl_write4(sc, MALO_REG_A2H_INTERRUPT_CAUSE, 0); 853 malo_ctl_write4(sc, MALO_REG_A2H_INTERRUPT_MASK, 0); 854 malo_ctl_write4(sc, MALO_REG_A2H_INTERRUPT_STATUS_MASK, 0); 855 856 /* load firmware */ 857 if ((error = malo_load_bootimg(sc))) 858 goto fail; 859 if ((error = malo_load_firmware(sc))) 860 goto fail; 861 862 /* enable interrupts */ 863 malo_ctl_write4(sc, MALO_REG_A2H_INTERRUPT_MASK, 0x1f); 864 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_WRITE); 865 malo_ctl_write4(sc, MALO_REG_A2H_INTERRUPT_STATUS_MASK, 0x1f); 866 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_WRITE); 867 868 if ((error = malo_cmd_get_spec(sc))) 869 goto fail; 870 871 /* select default channel */ 872 ic->ic_bss->ni_chan = ic->ic_ibss_chan; 873 874 /* initialize hardware */ 875 if ((error = malo_cmd_set_channel(sc, ic->ic_bss->ni_chan))) { 876 aprint_error_dev(sc->sc_dev, "setting channel failed!\n"); 877 goto fail; 878 } 879 if ((error = malo_cmd_set_antenna(sc, 1))) { 880 aprint_error_dev(sc->sc_dev, "setting RX antenna failed!\n"); 881 goto fail; 882 } 883 if ((error = malo_cmd_set_antenna(sc, 2))) { 884 aprint_error_dev(sc->sc_dev, "setting TX antenna failed!\n"); 885 goto fail; 886 } 887 if ((error = malo_cmd_set_radio(sc, 1, 5))) { 888 aprint_error_dev(sc->sc_dev, "turn radio on failed!\n"); 889 goto fail; 890 } 891 if ((error = malo_cmd_set_txpower(sc, 100))) { 892 aprint_error_dev(sc->sc_dev, "setting TX power failed!\n"); 893 goto fail; 894 } 895 if ((error = malo_cmd_set_rts(sc, IEEE80211_RTS_MAX))) { 896 aprint_error_dev(sc->sc_dev, "setting RTS failed!\n"); 897 goto fail; 898 } 899 900 ifp->if_flags |= IFF_RUNNING; 901 902 if (ic->ic_opmode != IEEE80211_M_MONITOR) 903 /* start background scanning */ 904 ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); 905 else 906 /* in monitor mode change directly into run state */ 907 ieee80211_new_state(ic, IEEE80211_S_RUN, -1); 908 909 return (0); 910 911 fail: 912 /* reset adapter */ 913 DPRINTF(1, "%s: malo_init failed, resetting card\n", 914 device_xname(sc->sc_dev)); 915 malo_stop(ifp, 1); 916 return (error); 917 } 918 919 static int 920 malo_ioctl(struct ifnet *ifp, u_long cmd, void* data) 921 { 922 struct malo_softc *sc = ifp->if_softc; 923 struct ieee80211com *ic = &sc->sc_ic; 924 int s, error = 0; 925 926 s = splnet(); 927 928 switch (cmd) { 929 case SIOCSIFFLAGS: 930 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 931 break; 932 if (ifp->if_flags & IFF_UP) { 933 if ((ifp->if_flags & IFF_RUNNING) == 0) 934 malo_init(ifp); 935 } else { 936 if (ifp->if_flags & IFF_RUNNING) 937 malo_stop(ifp, 1); 938 } 939 break; 940 case SIOCADDMULTI: 941 case SIOCDELMULTI: 942 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 943 /* setup multicast filter, etc */ 944 error = 0; 945 } 946 break; 947 case SIOCS80211CHANNEL: 948 /* allow fast channel switching in monitor mode */ 949 error = ieee80211_ioctl(ic, cmd, data); 950 if (error == ENETRESET && 951 ic->ic_opmode == IEEE80211_M_MONITOR) { 952 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 953 (IFF_UP | IFF_RUNNING)) { 954 ic->ic_bss->ni_chan = ic->ic_ibss_chan; 955 malo_cmd_set_channel(sc, ic->ic_bss->ni_chan); 956 } 957 error = 0; 958 } 959 break; 960 default: 961 error = ieee80211_ioctl(ic, cmd, data); 962 break; 963 } 964 965 if (error == ENETRESET) { 966 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 967 (IFF_UP | IFF_RUNNING)) 968 malo_init(ifp); 969 error = 0; 970 } 971 972 splx(s); 973 974 return (error); 975 } 976 977 static void 978 malo_start(struct ifnet *ifp) 979 { 980 struct malo_softc *sc = ifp->if_softc; 981 struct ieee80211com *ic = &sc->sc_ic; 982 struct mbuf *m0; 983 struct ether_header *eh; 984 struct ieee80211_node *ni = NULL; 985 986 DPRINTF(2, "%s: %s\n", device_xname(sc->sc_dev), __func__); 987 988 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 989 return; 990 991 for (;;) { 992 IF_POLL(&ic->ic_mgtq, m0); 993 if (m0 != NULL) { 994 if (sc->sc_txring.queued >= MALO_TX_RING_COUNT) { 995 ifp->if_flags |= IFF_OACTIVE; 996 break; 997 } 998 IF_DEQUEUE(&ic->ic_mgtq, m0); 999 1000 ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif; 1001 m0->m_pkthdr.rcvif = NULL; 1002 1003 bpf_mtap3(ic->ic_rawbpf, m0); 1004 1005 if (malo_tx_data(sc, m0, ni) != 0) 1006 break; 1007 } else { 1008 if (ic->ic_state != IEEE80211_S_RUN) 1009 break; 1010 IFQ_POLL(&ifp->if_snd, m0); 1011 if (m0 == NULL) 1012 break; 1013 if (sc->sc_txring.queued >= MALO_TX_RING_COUNT - 1) { 1014 ifp->if_flags |= IFF_OACTIVE; 1015 break; 1016 } 1017 1018 if (m0->m_len < sizeof (*eh) && 1019 (m0 = m_pullup(m0, sizeof (*eh))) == NULL) { 1020 ifp->if_oerrors++; 1021 continue; 1022 } 1023 eh = mtod(m0, struct ether_header *); 1024 ni = ieee80211_find_txnode(ic, eh->ether_dhost); 1025 if (ni == NULL) { 1026 m_freem(m0); 1027 ifp->if_oerrors++; 1028 continue; 1029 } 1030 1031 // XXX must I call ieee_classify at this point ? 1032 1033 IFQ_DEQUEUE(&ifp->if_snd, m0); 1034 bpf_mtap(ifp, m0); 1035 1036 m0 = ieee80211_encap(ic, m0, ni); 1037 if (m0 == NULL) 1038 continue; 1039 bpf_mtap(ifp, m0); 1040 1041 if (malo_tx_data(sc, m0, ni) != 0) { 1042 ieee80211_free_node(ni); 1043 ifp->if_oerrors++; 1044 break; 1045 } 1046 } 1047 } 1048 } 1049 1050 void 1051 malo_stop(struct ifnet* ifp, int disable) 1052 { 1053 struct malo_softc *sc = ifp->if_softc; 1054 struct ieee80211com *ic = &sc->sc_ic; 1055 1056 DPRINTF(1, "%s: %s\n", ifp->if_xname, __func__); 1057 1058 /* reset adapter */ 1059 if (ifp->if_flags & IFF_RUNNING) 1060 malo_ctl_write4(sc, MALO_REG_H2A_INTERRUPT_EVENTS, (1 << 15)); 1061 1062 /* device is not running anymore */ 1063 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1064 1065 /* change back to initial state */ 1066 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); 1067 1068 /* reset RX / TX rings */ 1069 malo_reset_tx_ring(sc, &sc->sc_txring); 1070 malo_reset_rx_ring(sc, &sc->sc_rxring); 1071 1072 /* set initial rate */ 1073 sc->sc_last_txrate = -1; 1074 1075 /* power off cardbus socket */ 1076 if (sc->sc_disable) 1077 sc->sc_disable(sc); 1078 } 1079 1080 static void 1081 malo_watchdog(struct ifnet *ifp) 1082 { 1083 1084 } 1085 1086 static int 1087 malo_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 1088 { 1089 struct ifnet *ifp = ic->ic_ifp; 1090 struct malo_softc *sc = ifp->if_softc; 1091 enum ieee80211_state ostate; 1092 int rate; 1093 1094 DPRINTF(2, "%s: %s\n", device_xname(sc->sc_dev), __func__); 1095 1096 ostate = ic->ic_state; 1097 callout_stop(&sc->sc_scan_to); 1098 1099 switch (nstate) { 1100 case IEEE80211_S_INIT: 1101 DPRINTF(1, "%s: newstate INIT\n", device_xname(sc->sc_dev)); 1102 break; 1103 case IEEE80211_S_SCAN: 1104 DPRINTF(1, "%s: newstate SCAN\n", device_xname(sc->sc_dev)); 1105 if (ostate == IEEE80211_S_INIT) { 1106 if (malo_cmd_set_prescan(sc) != 0) { 1107 DPRINTF(1, "%s: can't set prescan\n", 1108 device_xname(sc->sc_dev)); 1109 } 1110 } else { 1111 malo_cmd_set_channel(sc, ic->ic_curchan); 1112 } 1113 callout_schedule(&sc->sc_scan_to, hz/2); 1114 break; 1115 case IEEE80211_S_AUTH: 1116 DPRINTF(1, "%s: newstate AUTH\n", device_xname(sc->sc_dev)); 1117 malo_cmd_set_postscan(sc, ic->ic_myaddr, 1); 1118 malo_cmd_set_channel(sc, ic->ic_curchan); 1119 break; 1120 case IEEE80211_S_ASSOC: 1121 DPRINTF(1, "%s: newstate ASSOC\n", device_xname(sc->sc_dev)); 1122 malo_cmd_set_channel(sc, ic->ic_curchan); 1123 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1124 malo_cmd_set_radio(sc, 1, 3); /* short preamble */ 1125 else 1126 malo_cmd_set_radio(sc, 1, 1); /* long preamble */ 1127 1128 malo_cmd_set_aid(sc, ic->ic_bss->ni_bssid, 1129 ic->ic_bss->ni_associd); 1130 1131 if (ic->ic_fixed_rate == -1) 1132 /* automatic rate adaption */ 1133 malo_cmd_set_rate(sc, 0); 1134 else { 1135 /* fixed rate */ 1136 rate = malo_fix2rate(ic->ic_fixed_rate); 1137 malo_cmd_set_rate(sc, rate); 1138 } 1139 1140 malo_set_slot(sc); 1141 break; 1142 case IEEE80211_S_RUN: 1143 DPRINTF(1, "%s: newstate RUN\n", device_xname(sc->sc_dev)); 1144 break; 1145 default: 1146 break; 1147 } 1148 1149 return (sc->sc_newstate(ic, nstate, arg)); 1150 } 1151 1152 static void 1153 malo_newassoc(struct ieee80211_node *ni, int isnew) 1154 { 1155 } 1156 1157 static struct ieee80211_node * 1158 malo_node_alloc(struct ieee80211_node_table *nt) 1159 { 1160 struct malo_node *wn; 1161 1162 wn = malloc(sizeof(*wn), M_DEVBUF, M_NOWAIT | M_ZERO); 1163 if (wn == NULL) 1164 return (NULL); 1165 1166 return ((struct ieee80211_node *)wn); 1167 } 1168 1169 static int 1170 malo_media_change(struct ifnet *ifp) 1171 { 1172 int error; 1173 1174 DPRINTF(1, "%s: %s\n", ifp->if_xname, __func__); 1175 1176 error = ieee80211_media_change(ifp); 1177 if (error != ENETRESET) 1178 return (error); 1179 1180 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) 1181 malo_init(ifp); 1182 1183 return (0); 1184 } 1185 1186 static void 1187 malo_media_status(struct ifnet *ifp, struct ifmediareq *imr) 1188 { 1189 struct malo_softc *sc = ifp->if_softc; 1190 struct ieee80211com *ic = &sc->sc_ic; 1191 1192 imr->ifm_status = IFM_AVALID; 1193 imr->ifm_active = IFM_IEEE80211; 1194 if (ic->ic_state == IEEE80211_S_RUN) 1195 imr->ifm_status |= IFM_ACTIVE; 1196 1197 /* report last TX rate used by chip */ 1198 imr->ifm_active |= ieee80211_rate2media(ic, sc->sc_last_txrate, 1199 ic->ic_curmode); 1200 1201 switch (ic->ic_opmode) { 1202 case IEEE80211_M_STA: 1203 break; 1204 case IEEE80211_M_IBSS: 1205 imr->ifm_active |= IFM_IEEE80211_ADHOC; 1206 break; 1207 case IEEE80211_M_AHDEMO: 1208 break; 1209 case IEEE80211_M_HOSTAP: 1210 break; 1211 case IEEE80211_M_MONITOR: 1212 imr->ifm_active |= IFM_IEEE80211_MONITOR; 1213 break; 1214 default: 1215 break; 1216 } 1217 1218 switch (ic->ic_curmode) { 1219 case IEEE80211_MODE_11B: 1220 imr->ifm_active |= IFM_IEEE80211_11B; 1221 break; 1222 case IEEE80211_MODE_11G: 1223 imr->ifm_active |= IFM_IEEE80211_11G; 1224 break; 1225 } 1226 } 1227 1228 static int 1229 malo_chip2rate(int chip_rate) 1230 { 1231 switch (chip_rate) { 1232 /* CCK rates */ 1233 case 0: return (2); 1234 case 1: return (4); 1235 case 2: return (11); 1236 case 3: return (22); 1237 1238 /* OFDM rates */ 1239 case 4: return (0); /* reserved */ 1240 case 5: return (12); 1241 case 6: return (18); 1242 case 7: return (24); 1243 case 8: return (36); 1244 case 9: return (48); 1245 case 10: return (72); 1246 case 11: return (96); 1247 case 12: return (108); 1248 1249 /* no rate select yet or unknown rate */ 1250 default: return (-1); 1251 } 1252 } 1253 1254 static int 1255 malo_fix2rate(int fix_rate) 1256 { 1257 switch (fix_rate) { 1258 /* CCK rates */ 1259 case 0: return (2); 1260 case 1: return (4); 1261 case 2: return (11); 1262 case 3: return (22); 1263 1264 /* OFDM rates */ 1265 case 4: return (12); 1266 case 5: return (18); 1267 case 6: return (24); 1268 case 7: return (36); 1269 case 8: return (48); 1270 case 9: return (72); 1271 case 10: return (96); 1272 case 11: return (108); 1273 1274 /* unknown rate: should not happen */ 1275 default: return (0); 1276 } 1277 } 1278 1279 static void 1280 malo_next_scan(void *arg) 1281 { 1282 struct malo_softc *sc = arg; 1283 struct ieee80211com *ic = &sc->sc_ic; 1284 int s; 1285 1286 DPRINTF(1, "%s: %s\n", sc->sc_if.if_xname, __func__); 1287 1288 s = splnet(); 1289 1290 if (ic->ic_state == IEEE80211_S_SCAN) 1291 ieee80211_next_scan(ic); 1292 1293 splx(s); 1294 } 1295 1296 static void 1297 malo_tx_intr(struct malo_softc *sc) 1298 { 1299 struct ifnet *ifp = &sc->sc_if; 1300 struct malo_tx_desc *desc; 1301 struct malo_tx_data *data; 1302 struct malo_node *rn; 1303 int stat; 1304 1305 DPRINTF(2, "%s: %s\n", device_xname(sc->sc_dev), __func__); 1306 1307 stat = sc->sc_txring.stat; 1308 for (;;) { 1309 desc = &sc->sc_txring.desc[sc->sc_txring.stat]; 1310 data = &sc->sc_txring.data[sc->sc_txring.stat]; 1311 rn = (struct malo_node *)data->ni; 1312 1313 /* check if TX descriptor is not owned by FW anymore */ 1314 if ((le32toh(desc->status) & MALO_TXD_STATUS_FW_OWNED) || 1315 !(le32toh(data->softstat) & MALO_TXD_STATUS_FAILED_AGING)) 1316 break; 1317 1318 /* if no frame has been sent, ignore */ 1319 if (rn == NULL) 1320 goto next; 1321 1322 /* check TX state */ 1323 switch (le32toh(desc->status) & MALO_TXD_STATUS_USED) { 1324 case MALO_TXD_STATUS_OK: 1325 DPRINTF(2, "%s: data frame was sent successfully\n", 1326 device_xname(sc->sc_dev)); 1327 ifp->if_opackets++; 1328 break; 1329 default: 1330 DPRINTF(1, "%s: data frame sending error\n", 1331 device_xname(sc->sc_dev)); 1332 ifp->if_oerrors++; 1333 break; 1334 } 1335 1336 /* save last used TX rate */ 1337 sc->sc_last_txrate = malo_chip2rate(desc->datarate); 1338 1339 /* cleanup TX data and TX descriptor */ 1340 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1341 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1342 bus_dmamap_unload(sc->sc_dmat, data->map); 1343 m_freem(data->m); 1344 ieee80211_free_node(data->ni); 1345 data->m = NULL; 1346 data->ni = NULL; 1347 data->softstat &= htole32(~0x80); 1348 desc->status = 0; 1349 desc->len = 0; 1350 1351 DPRINTF(2, "%s: tx done idx=%u\n", 1352 device_xname(sc->sc_dev), sc->sc_txring.stat); 1353 1354 sc->sc_txring.queued--; 1355 next: 1356 if (++sc->sc_txring.stat >= sc->sc_txring.count) 1357 sc->sc_txring.stat = 0; 1358 if (sc->sc_txring.stat == stat) 1359 break; 1360 } 1361 1362 sc->sc_tx_timer = 0; 1363 ifp->if_flags &= ~IFF_OACTIVE; 1364 malo_start(ifp); 1365 } 1366 1367 static int 1368 malo_tx_data(struct malo_softc *sc, struct mbuf *m0, 1369 struct ieee80211_node *ni) 1370 { 1371 struct ieee80211com *ic = &sc->sc_ic; 1372 struct ifnet *ifp = &sc->sc_if; 1373 struct malo_tx_desc *desc; 1374 struct malo_tx_data *data; 1375 struct ieee80211_frame *wh; 1376 struct ieee80211_key *k; 1377 struct mbuf *mnew; 1378 int error; 1379 1380 DPRINTF(2, "%s: %s\n", device_xname(sc->sc_dev), __func__); 1381 1382 desc = &sc->sc_txring.desc[sc->sc_txring.cur]; 1383 data = &sc->sc_txring.data[sc->sc_txring.cur]; 1384 1385 if (m0->m_len < sizeof(struct ieee80211_frame)) { 1386 m0 = m_pullup(m0, sizeof(struct ieee80211_frame)); 1387 if (m0 == NULL) { 1388 ifp->if_ierrors++; 1389 return (ENOBUFS); 1390 } 1391 } 1392 wh = mtod(m0, struct ieee80211_frame *); 1393 1394 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1395 k = ieee80211_crypto_encap(ic, ni, m0); 1396 if (k == NULL) { 1397 m_freem(m0); 1398 return ENOBUFS; 1399 } 1400 1401 /* packet header may have moved, reset our local pointer */ 1402 wh = mtod(m0, struct ieee80211_frame *); 1403 } 1404 1405 if (sc->sc_drvbpf != NULL) { 1406 struct malo_tx_radiotap_hdr *tap = &sc->sc_txtap; 1407 1408 tap->wt_flags = 0; 1409 tap->wt_chan_freq = htole16(ni->ni_chan->ic_freq); 1410 tap->wt_chan_flags = htole16(ni->ni_chan->ic_flags); 1411 tap->wt_rate = sc->sc_last_txrate; 1412 if (wh->i_fc[1] & IEEE80211_FC1_WEP) 1413 tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; 1414 1415 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0); 1416 } 1417 1418 /* 1419 * inject FW specific fields into the 802.11 frame 1420 * 1421 * 2 bytes FW len (inject) 1422 * 24 bytes 802.11 frame header 1423 * 6 bytes addr4 (inject) 1424 * n bytes 802.11 frame body 1425 * 1426 * For now copy all into a new mcluster. 1427 */ 1428 MGETHDR(mnew, M_DONTWAIT, MT_DATA); 1429 if (mnew == NULL) 1430 return (ENOBUFS); 1431 MCLGET(mnew, M_DONTWAIT); 1432 if (!(mnew->m_flags & M_EXT)) { 1433 m_free(mnew); 1434 return (ENOBUFS); 1435 } 1436 1437 *mtod(mnew, uint16_t *) = htole16(m0->m_pkthdr.len - 24); /* FW len */ 1438 memmove(mtod(mnew, char*) + 2, wh, sizeof(*wh)); 1439 memset(mtod(mnew, char*) + 26, 0, 6); 1440 m_copydata(m0, sizeof(*wh), m0->m_pkthdr.len - sizeof(*wh), 1441 mtod(mnew, char*) + 32); 1442 mnew->m_pkthdr.len = mnew->m_len = m0->m_pkthdr.len + 8; 1443 m_freem(m0); 1444 m0 = mnew; 1445 1446 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1447 BUS_DMA_NOWAIT); 1448 if (error != 0) { 1449 aprint_error_dev(sc->sc_dev, "can't map mbuf (error %d)\n", error); 1450 m_freem(m0); 1451 return (error); 1452 } 1453 1454 data->m = m0; 1455 data->ni = ni; 1456 data->softstat |= htole32(0x80); 1457 1458 malo_tx_setup_desc(sc, desc, m0->m_pkthdr.len, 1, 1459 data->map->dm_segs, data->map->dm_nsegs); 1460 1461 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 1462 BUS_DMASYNC_PREWRITE); 1463 bus_dmamap_sync(sc->sc_dmat, sc->sc_txring.map, 1464 sc->sc_txring.cur * sizeof(struct malo_tx_desc), 1465 sizeof(struct malo_tx_desc), BUS_DMASYNC_PREWRITE); 1466 1467 DPRINTF(2, "%s: sending frame, pktlen=%u, idx=%u\n", 1468 device_xname(sc->sc_dev), m0->m_pkthdr.len, sc->sc_txring.cur); 1469 1470 sc->sc_txring.queued++; 1471 sc->sc_txring.cur = (sc->sc_txring.cur + 1) % MALO_TX_RING_COUNT; 1472 1473 /* kick data TX */ 1474 malo_ctl_write4(sc, MALO_REG_H2A_INTERRUPT_EVENTS, 1); 1475 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_WRITE); 1476 1477 return (0); 1478 } 1479 1480 static void 1481 malo_tx_setup_desc(struct malo_softc *sc, struct malo_tx_desc *desc, 1482 int len, int rate, const bus_dma_segment_t *segs, int nsegs) 1483 { 1484 desc->len = htole16(segs[0].ds_len); 1485 desc->datarate = rate; /* 0 = mgmt frame, 1 = data frame */ 1486 desc->physdata = htole32(segs[0].ds_addr); 1487 desc->status = htole32(MALO_TXD_STATUS_OK | MALO_TXD_STATUS_FW_OWNED); 1488 } 1489 1490 static void 1491 malo_rx_intr(struct malo_softc *sc) 1492 { 1493 struct ieee80211com *ic = &sc->sc_ic; 1494 struct ifnet *ifp = &sc->sc_if; 1495 struct malo_rx_desc *desc; 1496 struct malo_rx_data *data; 1497 struct ieee80211_frame *wh; 1498 struct ieee80211_node *ni; 1499 struct mbuf *mnew, *m; 1500 uint32_t rxRdPtr, rxWrPtr; 1501 int error, i; 1502 1503 rxRdPtr = malo_mem_read4(sc, sc->sc_RxPdRdPtr); 1504 rxWrPtr = malo_mem_read4(sc, sc->sc_RxPdWrPtr); 1505 1506 for (i = 0; i < MALO_RX_RING_COUNT && rxRdPtr != rxWrPtr; i++) { 1507 desc = &sc->sc_rxring.desc[sc->sc_rxring.cur]; 1508 data = &sc->sc_rxring.data[sc->sc_rxring.cur]; 1509 1510 bus_dmamap_sync(sc->sc_dmat, sc->sc_rxring.map, 1511 sc->sc_rxring.cur * sizeof(struct malo_rx_desc), 1512 sizeof(struct malo_rx_desc), BUS_DMASYNC_POSTREAD); 1513 1514 DPRINTF(3, "%s: rx intr idx=%d, rxctrl=0x%02x, rssi=%d, " 1515 "status=0x%02x, channel=%d, len=%d, res1=%02x, rate=%d, " 1516 "physdata=0x%04x, physnext=0x%04x, qosctrl=%02x, res2=%d\n", 1517 device_xname(sc->sc_dev), 1518 sc->sc_rxring.cur, desc->rxctrl, desc->rssi, desc->status, 1519 desc->channel, le16toh(desc->len), desc->reserved1, 1520 desc->datarate, le32toh(desc->physdata), 1521 le32toh(desc->physnext), desc->qosctrl, desc->reserved2); 1522 1523 if ((desc->rxctrl & 0x80) == 0) 1524 break; 1525 1526 MGETHDR(mnew, M_DONTWAIT, MT_DATA); 1527 if (mnew == NULL) { 1528 ifp->if_ierrors++; 1529 goto skip; 1530 } 1531 1532 MCLGET(mnew, M_DONTWAIT); 1533 if (!(mnew->m_flags & M_EXT)) { 1534 m_freem(mnew); 1535 ifp->if_ierrors++; 1536 goto skip; 1537 } 1538 1539 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1540 data->map->dm_mapsize, BUS_DMASYNC_POSTREAD); 1541 bus_dmamap_unload(sc->sc_dmat, data->map); 1542 1543 error = bus_dmamap_load(sc->sc_dmat, data->map, 1544 mtod(mnew, void *), MCLBYTES, NULL, BUS_DMA_NOWAIT); 1545 if (error != 0) { 1546 m_freem(mnew); 1547 1548 error = bus_dmamap_load(sc->sc_dmat, data->map, 1549 mtod(data->m, void *), MCLBYTES, NULL, 1550 BUS_DMA_NOWAIT); 1551 if (error != 0) { 1552 panic("%s: could not load old rx mbuf", 1553 device_xname(sc->sc_dev)); 1554 } 1555 ifp->if_ierrors++; 1556 goto skip; 1557 } 1558 1559 /* 1560 * New mbuf mbuf successfully loaded 1561 */ 1562 m = data->m; 1563 data->m = mnew; 1564 desc->physdata = htole32(data->map->dm_segs->ds_addr); 1565 1566 /* finalize mbuf */ 1567 m->m_pkthdr.rcvif = ifp; 1568 m->m_pkthdr.len = m->m_len = le16toh(desc->len); 1569 1570 /* 1571 * cut out FW specific fields from the 802.11 frame 1572 * 1573 * 2 bytes FW len (cut out) 1574 * 24 bytes 802.11 frame header 1575 * 6 bytes addr4 (cut out) 1576 * n bytes 802.11 frame data 1577 */ 1578 memmove(m->m_data +6, m->m_data, 26); 1579 m_adj(m, 8); 1580 1581 if (sc->sc_drvbpf != NULL) { 1582 struct malo_rx_radiotap_hdr *tap = &sc->sc_rxtap; 1583 1584 tap->wr_flags = 0; 1585 tap->wr_chan_freq = 1586 htole16(ic->ic_bss->ni_chan->ic_freq); 1587 tap->wr_chan_flags = 1588 htole16(ic->ic_bss->ni_chan->ic_flags); 1589 1590 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m); 1591 } 1592 1593 wh = mtod(m, struct ieee80211_frame *); 1594 ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh); 1595 1596 /* send the frame to the 802.11 layer */ 1597 ieee80211_input(ic, m, ni, desc->rssi, 0); 1598 1599 /* node is no longer needed */ 1600 ieee80211_free_node(ni); 1601 1602 skip: 1603 desc->rxctrl = 0; 1604 rxRdPtr = le32toh(desc->physnext); 1605 1606 bus_dmamap_sync(sc->sc_dmat, sc->sc_rxring.map, 1607 sc->sc_rxring.cur * sizeof(struct malo_rx_desc), 1608 sizeof(struct malo_rx_desc), BUS_DMASYNC_PREWRITE); 1609 1610 sc->sc_rxring.cur = (sc->sc_rxring.cur + 1) % 1611 MALO_RX_RING_COUNT; 1612 } 1613 1614 malo_mem_write4(sc, sc->sc_RxPdRdPtr, rxRdPtr); 1615 } 1616 1617 static int 1618 malo_get_firmware(struct malo_softc *sc, const char *name, 1619 uint8_t** firmware_image, size_t* size) 1620 { 1621 firmware_handle_t fw; 1622 int error; 1623 1624 1625 /* load firmware image from disk */ 1626 if ((error = firmware_open("malo", name, &fw)) != 0) { 1627 aprint_error_dev(sc->sc_dev, "could not read firmware file\n"); 1628 return error; 1629 } 1630 1631 *size = firmware_get_size(fw); 1632 1633 *firmware_image = firmware_malloc(*size); 1634 if (*firmware_image == NULL) { 1635 aprint_error_dev(sc->sc_dev, "not enough memory to stock firmware\n"); 1636 error = ENOMEM; 1637 goto fail1; 1638 } 1639 1640 if ((error = firmware_read(fw, 0, *firmware_image, *size)) != 0) { 1641 aprint_error_dev(sc->sc_dev, "can't get firmware\n"); 1642 goto fail2; 1643 } 1644 1645 firmware_close(fw); 1646 1647 return 0; 1648 fail2: 1649 firmware_free(*firmware_image, *size); 1650 fail1: 1651 firmware_close(fw); 1652 return error; 1653 } 1654 1655 static int 1656 malo_load_bootimg(struct malo_softc *sc) 1657 { 1658 const char *name = "malo8335-h"; 1659 uint8_t *ucode; 1660 size_t size; 1661 int error, i; 1662 1663 /* load boot firmware */ 1664 if ((error = malo_get_firmware(sc, name, &ucode, &size)) != 0) { 1665 aprint_error_dev(sc->sc_dev, "error %d, could not read firmware %s\n", 1666 error, name); 1667 return (EIO); 1668 } 1669 1670 /* 1671 * It seems we are putting this code directly onto the stack of 1672 * the ARM cpu. I don't know why we need to instruct the DMA 1673 * engine to move the code. This is a big riddle without docu. 1674 */ 1675 DPRINTF(1, "%s: loading boot firmware\n", device_xname(sc->sc_dev)); 1676 malo_mem_write2(sc, 0xbef8, 0x001); 1677 malo_mem_write2(sc, 0xbefa, size); 1678 malo_mem_write4(sc, 0xbefc, 0); 1679 1680 bus_space_write_region_1(sc->sc_mem1_bt, sc->sc_mem1_bh, 0xbf00, 1681 ucode, size); 1682 1683 /* 1684 * we loaded the firmware into card memory now tell the CPU 1685 * to fetch the code and execute it. The memory mapped via the 1686 * first bar is internaly mapped to 0xc0000000. 1687 */ 1688 malo_send_cmd(sc, 0xc000bef8); 1689 1690 /* wait for the device to go into FW loading mode */ 1691 for (i = 0; i < 10; i++) { 1692 delay(50); 1693 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_READ); 1694 if (malo_ctl_read4(sc, 0x0c14) == 0x5) 1695 break; 1696 } 1697 if (i == 10) { 1698 aprint_error_dev(sc->sc_dev, "timeout at boot firmware load!\n"); 1699 free(ucode, M_DEVBUF); 1700 return (ETIMEDOUT); 1701 } 1702 firmware_free(ucode, size); 1703 1704 /* tell the card we're done and... */ 1705 malo_mem_write2(sc, 0xbef8, 0x001); 1706 malo_mem_write2(sc, 0xbefa, 0); 1707 malo_mem_write4(sc, 0xbefc, 0); 1708 malo_send_cmd(sc, 0xc000bef8); 1709 1710 DPRINTF(1, "%s: boot firmware loaded\n", device_xname(sc->sc_dev)); 1711 1712 return (0); 1713 } 1714 1715 1716 static int 1717 malo_load_firmware(struct malo_softc *sc) 1718 { 1719 struct malo_cmdheader *hdr; 1720 const char *name = "malo8335-m"; 1721 void *data; 1722 uint8_t *ucode; 1723 size_t size, count, bsize; 1724 int i, sn, error; 1725 1726 /* load real firmware now */ 1727 if ((error = malo_get_firmware(sc, name, &ucode, &size)) != 0) { 1728 aprint_error_dev(sc->sc_dev, "error %d, could not read firmware %s\n", 1729 error, name); 1730 return (EIO); 1731 } 1732 1733 DPRINTF(1, "%s: uploading firmware\n", device_xname(sc->sc_dev)); 1734 1735 hdr = sc->sc_cmd_mem; 1736 data = hdr + 1; 1737 sn = 1; 1738 for (count = 0; count < size; count += bsize) { 1739 bsize = MIN(256, size - count); 1740 1741 hdr->cmd = htole16(0x0001); 1742 hdr->size = htole16(bsize); 1743 hdr->seqnum = htole16(sn++); 1744 hdr->result = 0; 1745 1746 memcpy(data, ucode + count, bsize); 1747 1748 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1749 BUS_DMASYNC_PREWRITE); 1750 malo_send_cmd(sc, sc->sc_cmd_dmaaddr); 1751 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1752 BUS_DMASYNC_POSTWRITE); 1753 delay(500); 1754 } 1755 firmware_free(ucode, size); 1756 1757 DPRINTF(1, "%s: firmware upload finished\n", device_xname(sc->sc_dev)); 1758 1759 /* 1760 * send a command with size 0 to tell that the firmware has been 1761 * uploaded 1762 */ 1763 hdr->cmd = htole16(0x0001); 1764 hdr->size = 0; 1765 hdr->seqnum = htole16(sn++); 1766 hdr->result = 0; 1767 1768 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1769 BUS_DMASYNC_PREWRITE); 1770 malo_send_cmd(sc, sc->sc_cmd_dmaaddr); 1771 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1772 BUS_DMASYNC_POSTWRITE); 1773 delay(100); 1774 1775 DPRINTF(1, "%s: loading firmware\n", device_xname(sc->sc_dev)); 1776 1777 /* wait until firmware has been loaded */ 1778 for (i = 0; i < 200; i++) { 1779 malo_ctl_write4(sc, 0x0c10, 0x5a); 1780 delay(500); 1781 malo_ctl_barrier(sc, BUS_SPACE_BARRIER_WRITE | 1782 BUS_SPACE_BARRIER_READ); 1783 if (malo_ctl_read4(sc, 0x0c14) == 0xf0f1f2f4) 1784 break; 1785 } 1786 if (i == 200) { 1787 aprint_error_dev(sc->sc_dev, "timeout at firmware load!\n"); 1788 return (ETIMEDOUT); 1789 } 1790 1791 DPRINTF(1, "%s: firmware loaded\n", device_xname(sc->sc_dev)); 1792 1793 return (0); 1794 } 1795 1796 static int 1797 malo_set_slot(struct malo_softc *sc) 1798 { 1799 struct ieee80211com *ic = &sc->sc_ic; 1800 1801 if (ic->ic_flags & IEEE80211_F_SHSLOT) { 1802 /* set short slot */ 1803 if (malo_cmd_set_slot(sc, 1)) { 1804 aprint_error_dev(sc->sc_dev, "setting short slot failed\n"); 1805 return (ENXIO); 1806 } 1807 } else { 1808 /* set long slot */ 1809 if (malo_cmd_set_slot(sc, 0)) { 1810 aprint_error_dev(sc->sc_dev, "setting long slot failed\n"); 1811 return (ENXIO); 1812 } 1813 } 1814 1815 return (0); 1816 } 1817 1818 static void 1819 malo_update_slot(struct ifnet* ifp) 1820 { 1821 struct malo_softc *sc = ifp->if_softc; 1822 struct ieee80211com *ic = &sc->sc_ic; 1823 1824 malo_set_slot(sc); 1825 1826 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 1827 /* TODO */ 1828 } 1829 } 1830 1831 #ifdef MALO_DEBUG 1832 static void 1833 malo_hexdump(void *buf, int len) 1834 { 1835 u_char b[16]; 1836 int i, j, l; 1837 1838 for (i = 0; i < len; i += l) { 1839 printf("%4i:", i); 1840 l = min(sizeof(b), len - i); 1841 memcpy(b, (char*)buf + i, l); 1842 1843 for (j = 0; j < sizeof(b); j++) { 1844 if (j % 2 == 0) 1845 printf(" "); 1846 if (j % 8 == 0) 1847 printf(" "); 1848 if (j < l) 1849 printf("%02x", (int)b[j]); 1850 else 1851 printf(" "); 1852 } 1853 printf(" |"); 1854 for (j = 0; j < l; j++) { 1855 if (b[j] >= 0x20 && b[j] <= 0x7e) 1856 printf("%c", b[j]); 1857 else 1858 printf("."); 1859 } 1860 printf("|\n"); 1861 } 1862 } 1863 #endif 1864 1865 static const char * 1866 malo_cmd_string(uint16_t cmd) 1867 { 1868 int i; 1869 static char cmd_buf[16]; 1870 static const struct { 1871 uint16_t cmd_code; 1872 const char *cmd_string; 1873 } cmds[] = { 1874 { MALO_CMD_GET_HW_SPEC, "GetHwSpecifications" }, 1875 { MALO_CMD_SET_RADIO, "SetRadio" }, 1876 { MALO_CMD_SET_AID, "SetAid" }, 1877 { MALO_CMD_SET_TXPOWER, "SetTxPower" }, 1878 { MALO_CMD_SET_ANTENNA, "SetAntenna" }, 1879 { MALO_CMD_SET_PRESCAN, "SetPrescan" }, 1880 { MALO_CMD_SET_POSTSCAN, "SetPostscan" }, 1881 { MALO_CMD_SET_RATE, "SetRate" }, 1882 { MALO_CMD_SET_CHANNEL, "SetChannel" }, 1883 { MALO_CMD_SET_RTS, "SetRTS" }, 1884 { MALO_CMD_SET_SLOT, "SetSlot" }, 1885 }; 1886 1887 for (i = 0; i < sizeof(cmds) / sizeof(cmds[0]); i++) 1888 if ((le16toh(cmd) & 0x7fff) == cmds[i].cmd_code) 1889 return (cmds[i].cmd_string); 1890 1891 snprintf(cmd_buf, sizeof(cmd_buf), "unknown %#x", cmd); 1892 return (cmd_buf); 1893 } 1894 1895 static const char * 1896 malo_cmd_string_result(uint16_t result) 1897 { 1898 int i; 1899 static const struct { 1900 uint16_t result_code; 1901 const char *result_string; 1902 } results[] = { 1903 { MALO_CMD_RESULT_OK, "OK" }, 1904 { MALO_CMD_RESULT_ERROR, "general error" }, 1905 { MALO_CMD_RESULT_NOSUPPORT, "not supported" }, 1906 { MALO_CMD_RESULT_PENDING, "pending" }, 1907 { MALO_CMD_RESULT_BUSY, "ignored" }, 1908 { MALO_CMD_RESULT_PARTIALDATA, "incomplete" }, 1909 }; 1910 1911 for (i = 0; i < sizeof(results) / sizeof(results[0]); i++) 1912 if (le16toh(result) == results[i].result_code) 1913 return (results[i].result_string); 1914 1915 return ("unknown"); 1916 } 1917 1918 static int 1919 malo_cmd_get_spec(struct malo_softc *sc) 1920 { 1921 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 1922 struct malo_hw_spec *spec; 1923 1924 hdr->cmd = htole16(MALO_CMD_GET_HW_SPEC); 1925 hdr->size = htole16(sizeof(*hdr) + sizeof(*spec)); 1926 hdr->seqnum = htole16(42); /* the one and only */ 1927 hdr->result = 0; 1928 spec = (struct malo_hw_spec *)(hdr + 1); 1929 1930 memset(spec, 0, sizeof(*spec)); 1931 memset(spec->PermanentAddress, 0xff, ETHER_ADDR_LEN); 1932 spec->CookiePtr = htole32(sc->sc_cookie_dmaaddr); 1933 1934 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1935 BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); 1936 1937 if (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr) != 0) 1938 return (ETIMEDOUT); 1939 1940 /* get the data from the buffer */ 1941 DPRINTF(1, "%s: get_hw_spec: V%x R%x, #WCB %d, #Mcast %d, Regcode %d, " 1942 "#Ant %d\n", device_xname(sc->sc_dev), htole16(spec->HwVersion), 1943 htole32(spec->FWReleaseNumber), htole16(spec->NumOfWCB), 1944 htole16(spec->NumOfMCastAdr), htole16(spec->RegionCode), 1945 htole16(spec->NumberOfAntenna)); 1946 1947 /* tell the DMA engine where our rings are */ 1948 malo_mem_write4(sc, le32toh(spec->RxPdRdPtr) & 0xffff, 1949 sc->sc_rxring.physaddr); 1950 malo_mem_write4(sc, le32toh(spec->RxPdWrPtr) & 0xffff, 1951 sc->sc_rxring.physaddr); 1952 malo_mem_write4(sc, le32toh(spec->WcbBase0) & 0xffff, 1953 sc->sc_txring.physaddr); 1954 1955 /* save DMA RX pointers for later use */ 1956 sc->sc_RxPdRdPtr = le32toh(spec->RxPdRdPtr) & 0xffff; 1957 sc->sc_RxPdWrPtr = le32toh(spec->RxPdWrPtr) & 0xffff; 1958 1959 return (0); 1960 } 1961 1962 static int 1963 malo_cmd_set_prescan(struct malo_softc *sc) 1964 { 1965 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 1966 1967 hdr->cmd = htole16(MALO_CMD_SET_PRESCAN); 1968 hdr->size = htole16(sizeof(*hdr)); 1969 hdr->seqnum = 1; 1970 hdr->result = 0; 1971 1972 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1973 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1974 1975 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 1976 } 1977 1978 static int 1979 malo_cmd_set_postscan(struct malo_softc *sc, uint8_t *macaddr, uint8_t ibsson) 1980 { 1981 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 1982 struct malo_cmd_postscan *body; 1983 1984 hdr->cmd = htole16(MALO_CMD_SET_POSTSCAN); 1985 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 1986 hdr->seqnum = 1; 1987 hdr->result = 0; 1988 body = (struct malo_cmd_postscan *)(hdr + 1); 1989 1990 memset(body, 0, sizeof(*body)); 1991 memcpy(&body->bssid, macaddr, ETHER_ADDR_LEN); 1992 body->isibss = htole32(ibsson); 1993 1994 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 1995 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1996 1997 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 1998 } 1999 2000 static int 2001 malo_cmd_set_channel(struct malo_softc *sc, struct ieee80211_channel* chan) 2002 { 2003 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2004 struct ieee80211com *ic = &sc->sc_ic; 2005 struct malo_cmd_channel *body; 2006 uint8_t channel; 2007 2008 channel = ieee80211_chan2ieee(ic, chan); 2009 2010 hdr->cmd = htole16(MALO_CMD_SET_CHANNEL); 2011 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2012 hdr->seqnum = 1; 2013 hdr->result = 0; 2014 body = (struct malo_cmd_channel *)(hdr + 1); 2015 2016 memset(body, 0, sizeof(*body)); 2017 body->action = htole16(1); 2018 body->channel = channel; 2019 2020 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2021 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2022 2023 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2024 } 2025 2026 static int 2027 malo_cmd_set_antenna(struct malo_softc *sc, uint16_t antenna) 2028 { 2029 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2030 struct malo_cmd_antenna *body; 2031 2032 hdr->cmd = htole16(MALO_CMD_SET_ANTENNA); 2033 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2034 hdr->seqnum = 1; 2035 hdr->result = 0; 2036 body = (struct malo_cmd_antenna *)(hdr + 1); 2037 2038 memset(body, 0, sizeof(*body)); 2039 body->action = htole16(antenna); 2040 if (antenna == 1) 2041 body->mode = htole16(0xffff); 2042 else 2043 body->mode = htole16(2); 2044 2045 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2046 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2047 2048 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2049 } 2050 2051 static int 2052 malo_cmd_set_radio(struct malo_softc *sc, uint16_t enable, 2053 uint16_t preamble_mode) 2054 { 2055 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2056 struct malo_cmd_radio *body; 2057 2058 hdr->cmd = htole16(MALO_CMD_SET_RADIO); 2059 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2060 hdr->seqnum = 1; 2061 hdr->result = 0; 2062 body = (struct malo_cmd_radio *)(hdr + 1); 2063 2064 memset(body, 0, sizeof(*body)); 2065 body->action = htole16(1); 2066 body->preamble_mode = htole16(preamble_mode); 2067 body->enable = htole16(enable); 2068 2069 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2070 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2071 2072 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2073 } 2074 2075 static int 2076 malo_cmd_set_aid(struct malo_softc *sc, uint8_t *bssid, uint16_t associd) 2077 { 2078 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2079 struct malo_cmd_aid *body; 2080 2081 hdr->cmd = htole16(MALO_CMD_SET_AID); 2082 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2083 hdr->seqnum = 1; 2084 hdr->result = 0; 2085 body = (struct malo_cmd_aid *)(hdr + 1); 2086 2087 memset(body, 0, sizeof(*body)); 2088 body->associd = htole16(associd); 2089 memcpy(&body->macaddr[0], bssid, IEEE80211_ADDR_LEN); 2090 2091 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2092 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2093 2094 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2095 } 2096 2097 static int 2098 malo_cmd_set_txpower(struct malo_softc *sc, unsigned int powerlevel) 2099 { 2100 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2101 struct malo_cmd_txpower *body; 2102 2103 hdr->cmd = htole16(MALO_CMD_SET_TXPOWER); 2104 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2105 hdr->seqnum = 1; 2106 hdr->result = 0; 2107 body = (struct malo_cmd_txpower *)(hdr + 1); 2108 2109 memset(body, 0, sizeof(*body)); 2110 body->action = htole16(1); 2111 if (powerlevel < 30) 2112 body->supportpowerlvl = htole16(5); /* LOW */ 2113 else if (powerlevel >= 30 && powerlevel < 60) 2114 body->supportpowerlvl = htole16(10); /* MEDIUM */ 2115 else 2116 body->supportpowerlvl = htole16(15); /* HIGH */ 2117 2118 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2119 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2120 2121 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2122 } 2123 2124 static int 2125 malo_cmd_set_rts(struct malo_softc *sc, uint32_t threshold) 2126 { 2127 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2128 struct malo_cmd_rts *body; 2129 2130 hdr->cmd = htole16(MALO_CMD_SET_RTS); 2131 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2132 hdr->seqnum = 1; 2133 hdr->result = 0; 2134 body = (struct malo_cmd_rts *)(hdr + 1); 2135 2136 memset(body, 0, sizeof(*body)); 2137 body->action = htole16(1); 2138 body->threshold = htole32(threshold); 2139 2140 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2141 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2142 2143 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2144 } 2145 2146 static int 2147 malo_cmd_set_slot(struct malo_softc *sc, uint8_t slot) 2148 { 2149 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2150 struct malo_cmd_slot *body; 2151 2152 hdr->cmd = htole16(MALO_CMD_SET_SLOT); 2153 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2154 hdr->seqnum = 1; 2155 hdr->result = 0; 2156 body = (struct malo_cmd_slot *)(hdr + 1); 2157 2158 memset(body, 0, sizeof(*body)); 2159 body->action = htole16(1); 2160 body->slot = slot; 2161 2162 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2163 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2164 2165 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2166 } 2167 2168 static int 2169 malo_cmd_set_rate(struct malo_softc *sc, uint8_t rate) 2170 { 2171 struct ieee80211com *ic = &sc->sc_ic; 2172 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2173 struct malo_cmd_rate *body; 2174 int i; 2175 2176 hdr->cmd = htole16(MALO_CMD_SET_RATE); 2177 hdr->size = htole16(sizeof(*hdr) + sizeof(*body)); 2178 hdr->seqnum = 1; 2179 hdr->result = 0; 2180 body = (struct malo_cmd_rate *)(hdr + 1); 2181 2182 memset(body, 0,sizeof(*body)); 2183 2184 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 2185 /* TODO */ 2186 } else 2187 { 2188 body->aprates[0] = 2; 2189 body->aprates[1] = 4; 2190 body->aprates[2] = 11; 2191 body->aprates[3] = 22; 2192 if (ic->ic_curmode == IEEE80211_MODE_11G) { 2193 body->aprates[4] = 0; 2194 body->aprates[5] = 12; 2195 body->aprates[6] = 18; 2196 body->aprates[7] = 24; 2197 body->aprates[8] = 36; 2198 body->aprates[9] = 48; 2199 body->aprates[10] = 72; 2200 body->aprates[11] = 96; 2201 body->aprates[12] = 108; 2202 } 2203 } 2204 2205 if (rate != 0) { 2206 /* fixed rate */ 2207 for (i = 0; i < 13; i++) { 2208 if (body->aprates[i] == rate) { 2209 body->rateindex = i; 2210 body->dataratetype = 1; 2211 break; 2212 } 2213 } 2214 } 2215 2216 bus_dmamap_sync(sc->sc_dmat, sc->sc_cmd_dmam, 0, PAGE_SIZE, 2217 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2218 2219 return (malo_send_cmd_dma(sc, sc->sc_cmd_dmaaddr)); 2220 } 2221 2222 static void 2223 malo_cmd_response(struct malo_softc *sc) 2224 { 2225 struct malo_cmdheader *hdr = sc->sc_cmd_mem; 2226 2227 if (le16toh(hdr->result) != MALO_CMD_RESULT_OK) { 2228 aprint_error_dev(sc->sc_dev, "firmware cmd %s failed with %s\n", 2229 malo_cmd_string(hdr->cmd), 2230 malo_cmd_string_result(hdr->result)); 2231 } 2232 2233 #ifdef MALO_DEBUG 2234 aprint_error_dev(sc->sc_dev, "cmd answer for %s=%s\n", 2235 malo_cmd_string(hdr->cmd), 2236 malo_cmd_string_result(hdr->result)); 2237 2238 if (malo_d > 2) 2239 malo_hexdump(hdr, le16toh(hdr->size)); 2240 #endif 2241 } 2242
Indexes created Wed Sep 24 05:09:52 GMT 2025