maloreg.h revision 1.1 1 /* $NetBSD: maloreg.h,v 1.1 2012/07/30 18:57:19 degroote Exp $ */
2 /* $OpenBSD: if_maloreg.h,v 1.15 2007/10/08 22:08:12 mglocker Exp $ */
3
4 /*
5 * Copyright (c) 2007 Marcus Glocker <mglocker (at) openbsd.org>
6 *
7 * Permission to use, copy, modify, and distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
10 *
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 */
19
20 #define MALO_REG_INT_CODE 0x00000C14
21 /* From host to ARM */
22 #define MALO_REG_H2A_INTERRUPT_EVENTS 0x00000C18
23
24 /* bit definitions for MALO_REG_H2A_INTERRUPT_CAUSE */
25 #define MALO_H2ARIC_BIT_PPA_READY 0x00000001
26 #define MALO_H2ARIC_BIT_DOOR_BELL 0x00000002 /* bit 1 */
27 #define MALO_H2ARIC_BIT_PS 0x00000004
28 #define MALO_H2ARIC_BIT_PSPOLL 0x00000008 /* bit 3 */
29
30 /* From ARM to host */
31 #define MALO_REG_A2H_INTERRUPT_CAUSE 0x00000C30
32 #define MALO_REG_A2H_INTERRUPT_MASK 0x00000C34
33 #define MALO_REG_A2H_INTERRUPT_CLEAR_SEL 0x00000C38
34 #define MALO_REG_A2H_INTERRUPT_STATUS_MASK 0x00000C3C
35
36 /* bit definitions for MALO_REG_A2H_INTERRUPT_CAUSE */
37 #define MALO_A2HRIC_BIT_TX_DONE 0x00000001 /* bit 0 */
38 #define MALO_A2HRIC_BIT_RX_RDY 0x00000002 /* bit 1 */
39 #define MALO_A2HRIC_BIT_OPC_DONE 0x00000004
40 #define MALO_A2HRIC_BIT_MAC_EVENT 0x00000008
41 #define MALO_A2HRIC_BIT_RX_PROBLEM 0x00000010
42 #define MALO_A2HRIC_BIT_RADIO_OFF 0x00000020 /* bit 5 */
43 #define MALO_A2HRIC_BIT_RADIO_ON 0x00000040
44 #define MALO_A2HRIC_BIT_RADAR_DETECT 0x00000080
45 #define MALO_A2HRIC_BIT_ICV_ERROR 0x00000100
46 #define MALO_A2HRIC_BIT_MIC_ERROR 0x00000200 /* bit 9 */
47 #define MALO_A2HRIC_BIT_QUEUE_EMPTY 0x00000400
48 #define MALO_A2HRIC_BIT_QUEUE_FULL 0x00000800
49 #define MALO_A2HRIC_BIT_CHAN_SWITCH 0x00001000
50 #define MALO_A2HRIC_BIT_TX_WATCHDOG 0x00002000
51 #define MALO_A2HRIC_BIT_BA_WATCHDOG 0x00004000
52
53 #define MALO_ISR_SRC_BITS \
54 (MALO_A2HRIC_BIT_RX_RDY | \
55 MALO_A2HRIC_BIT_TX_DONE | \
56 MALO_A2HRIC_BIT_OPC_DONE | \
57 MALO_A2HRIC_BIT_MAC_EVENT | \
58 MALO_A2HRIC_BIT_MIC_ERROR | \
59 MALO_A2HRIC_BIT_ICV_ERROR | \
60 MALO_A2HRIC_BIT_RADAR_DETECT | \
61 MALO_A2HRIC_BIT_CHAN_SWITCH | \
62 MALO_A2HRIC_BIT_TX_WATCHDOG | \
63 MALO_A2HRIC_BIT_QUEUE_EMPTY)
64 #define MALO_ISR_RESET (1<<15)
65
66 #define MALO_A2HRIC_BIT_MASK MALO_ISR_SRC_BITS
67
68 /* map to 0x80000000 on BAR1 */
69 #define MALO_REG_GEN_PTR 0x00000C10
70 #define MALO_REG_INT_CODE 0x00000C14
71 #define MALO_REG_SCRATCH 0x00000C40
72
73 /*
74 * define OpMode for SoftAP/Station mode
75 *
76 * the following mode signature has to be written to PCI scratch register#0
77 * right after successfully downloading the last block of firmware and
78 * before waiting for firmware ready signature
79 */
80 #define MALO_HOSTCMD_STA_MODE 0x5A
81 #define MALO_HOSTCMD_STA_FWRDY_SIGNATURE 0xF0F1F2F4
82
83 /*
84 * 16 bit host command code
85 */
86 #define MALO_HOSTCMD_NONE 0x0000
87 #define MALO_HOSTCMD_CODE_DNLD 0x0001
88 #define MALO_HOSTCMD_GET_HW_SPEC 0x0003
89 #define MALO_HOSTCMD_SET_HW_SPEC 0x0004
90 #define MALO_HOSTCMD_MAC_MULTICAST_ADR 0x0010
91 #define MALO_HOSTCMD_SET_WEPKEY 0x0013
92 #define MALO_HOSTCMD_802_11_RADIO_CONTROL 0x001c
93 #define MALO_HOSTCMD_802_11_RF_TX_POWER 0x001e
94 #define MALO_HOSTCMD_802_11_RF_ANTENNA 0x0020
95 #define MALO_HOSTCMD_SET_PRE_SCAN 0x0107
96 #define MALO_HOSTCMD_SET_POST_SCAN 0x0108
97 #define MALO_HOSTCMD_SET_RF_CHANNEL 0x010a
98 #define MALO_HOSTCMD_SET_AID 0x010d
99 #define MALO_HOSTCMD_SET_RATE 0x0110
100 #define MALO_HOSTCMD_SET_SLOT 0x0114
101 /* define DFS lab commands */
102 #define MALO_HOSTCMD_SET_FIXED_RATE 0x0126
103 #define MALO_HOSTCMD_SET_REGION_POWER 0x0128
104 #define MALO_HOSTCMD_GET_CALTABLE 0x1134
105
106 /*
107 * definition of action or option for each command.
108 */
109 /* define general purpose action */
110 #define MALO_HOSTCMD_ACT_GEN_GET 0x0000
111 #define MALO_HOSTCMD_ACT_GEN_SET 0x0001
112 #define MALO_HOSTCMD_ACT_GEN_SET_LIST 0x0002
113
114 /* define action or option for HostCmd_FW_USE_FIXED_RATE */
115 #define MALO_HOSTCMD_ACT_USE_FIXED_RATE 0x0001
116 #define MALO_HOSTCMD_ACT_NOT_USE_FIXED_RATE 0x0002
117
118 /* INT code register event definition */
119 #define MALO_INT_CODE_CMD_FINISHED 0x00000005
120