mb86960var.h revision 1.29
1 /* $NetBSD: mb86960var.h,v 1.29 2002/10/04 15:22:30 tsutsui Exp $ */ 2 3 /* 4 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995 5 * 6 * This software may be used, modified, copied, distributed, and sold, in 7 * both source and binary form provided that the above copyright, these 8 * terms and the following disclaimer are retained. The name of the author 9 * and/or the contributor may not be used to endorse or promote products 10 * derived from this software without specific prior written permission. 11 * 12 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND 13 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 14 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 15 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE 16 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 17 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 18 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION. 19 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 20 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 21 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 22 * SUCH DAMAGE. 23 */ 24 25 /* 26 * Portions copyright (C) 1993, David Greenman. This software may be used, 27 * modified, copied, distributed, and sold, in both source and binary form 28 * provided that the above copyright and these terms are retained. Under no 29 * circumstances is the author responsible for the proper functioning of this 30 * software, nor does the author assume any responsibility for damages 31 * incurred with its use. 32 */ 33 34 /* 35 * Device driver for Fujitsu MB86960A/MB86965A based Ethernet cards. 36 * Contributed by M.S. <seki (at) sysrap.cs.fujitsu.co.jp> 37 * 38 * This version is intended to be a generic template for various 39 * MB86960A/MB86965A based Ethernet cards. It currently supports 40 * Fujitsu FMV-180 series (i.e., FMV-181 and FMV-182) and Allied- 41 * Telesis AT1700 series and RE2000 series. There are some 42 * unnecessary hooks embedded, which are primarily intended to support 43 * other types of Ethernet cards, but the author is not sure whether 44 * they are useful. 45 */ 46 47 #include "rnd.h" 48 49 #if NRND > 0 50 #include <sys/rnd.h> 51 #endif 52 53 /* 54 * Default settings for fe driver specific options. 55 * They can be set in config file by "options" statements. 56 */ 57 58 /* 59 * Debug control. 60 * 0: No debug at all. All debug specific codes are stripped off. 61 * 1: Silent. No debug messages are logged except emergent ones. 62 * 2: Brief. Lair events and/or important information are logged. 63 * 3: Detailed. Logs all information which *may* be useful for debugging. 64 * 4: Trace. All actions in the driver is logged. Super verbose. 65 */ 66 #ifndef FE_DEBUG 67 #define FE_DEBUG 1 68 #endif 69 70 /* 71 * Delay padding of short transmission packets to minimum Ethernet size. 72 * This may or may not gain performance. An EXPERIMENTAL option. 73 */ 74 #ifndef FE_DELAYED_PADDING 75 #define FE_DELAYED_PADDING 0 76 #endif 77 78 /* 79 * Transmit just one packet per a "send" command to 86960. 80 * This option is intended for performance test. An EXPERIMENTAL option. 81 */ 82 #ifndef FE_SINGLE_TRANSMISSION 83 #define FE_SINGLE_TRANSMISSION 0 84 #endif 85 86 /* 87 * Device configuration flags. 88 */ 89 90 /* DLCR6 settings. */ 91 #define FE_FLAGS_DLCR6_VALUE 0x007F 92 93 /* Force DLCR6 override. */ 94 #define FE_FLAGS_OVERRIDE_DLCR6 0x0080 95 96 /* A cludge for PCMCIA support. */ 97 #define FE_FLAGS_PCMCIA 0x8000 98 99 /* 100 * Supported hardware (Ethernet card) types 101 * This information is currently used only for debugging 102 */ 103 enum fe_type { 104 /* For cards which are successfully probed but not identified. */ 105 FE_TYPE_UNKNOWN = 0, 106 107 /* Fujitsu FMV-180 series. */ 108 FE_TYPE_FMV181, 109 FE_TYPE_FMV182, 110 111 /* Allied-Telesis AT1700 series and RE2000 series. */ 112 FE_TYPE_AT1700T, 113 FE_TYPE_AT1700BT, 114 FE_TYPE_AT1700FT, 115 FE_TYPE_AT1700AT, 116 FE_TYPE_RE2000, 117 118 /* PCMCIA by Fujitsu. */ 119 FE_TYPE_MBH10302, 120 FE_TYPE_MBH10304 121 }; 122 123 enum mb86960_type { 124 MB86960_TYPE_86960, 125 MB86960_TYPE_86965 126 }; 127 128 /* 129 * fe_softc: per line info and status 130 */ 131 struct mb86960_softc { 132 struct device sc_dev; 133 struct ethercom sc_ec; /* ethernet common */ 134 struct ifmedia sc_media; /* supported media information */ 135 136 bus_space_tag_t sc_bst; /* bus space */ 137 bus_space_handle_t sc_bsh; 138 139 /* Set by probe() and not modified in later phases. */ 140 enum mb86960_type type; /* controller type */ 141 142 u_char proto_dlcr4; /* DLCR4 prototype. */ 143 u_char proto_dlcr5; /* DLCR5 prototype. */ 144 u_char proto_dlcr6; /* DLCR6 prototype. */ 145 u_char proto_dlcr7; /* DLCR7 prototype. */ 146 u_char proto_bmpr13; /* BMPR13 prototype. */ 147 148 /* Vendor specific hooks. */ 149 void (*init_card) __P((struct mb86960_softc *)); 150 void (*stop_card) __P((struct mb86960_softc *)); 151 152 /* Transmission buffer management. */ 153 u_short txb_size; /* total bytes in TX buffer */ 154 u_short txb_free; /* free bytes in TX buffer */ 155 u_char txb_count; /* number of packets in TX buffer */ 156 u_char txb_sched; /* number of scheduled packets */ 157 u_char txb_padding; /* number of delayed padding bytes */ 158 159 /* Multicast address filter management. */ 160 u_char filter_change; /* MARs must be changed ASAP. */ 161 u_char filter[FE_FILTER_LEN]; /* new filter value. */ 162 163 u_int8_t sc_enaddr[ETHER_ADDR_LEN]; 164 165 #if NRND > 0 166 rndsource_element_t rnd_source; 167 #endif 168 169 u_int32_t sc_flags; /* misc. flags */ 170 #define FE_FLAGS_ENABLED 0x0001 /* power enabled on interface */ 171 #define FE_FLAGS_ATTACHED 0x0002 /* attach has succeeded */ 172 173 int (*sc_enable) __P((struct mb86960_softc *)); 174 void (*sc_disable) __P((struct mb86960_softc *)); 175 176 int (*sc_mediachange) __P((struct mb86960_softc *)); 177 void (*sc_mediastatus) __P((struct mb86960_softc *, 178 struct ifmediareq *)); 179 }; 180 181 /* 182 * Fe driver specific constants which relate to 86960/86965. 183 */ 184 185 /* Interrupt masks. */ 186 #define FE_TMASK (FE_D2_COLL16 | FE_D2_TXDONE) 187 #define FE_RMASK (FE_D3_OVRFLO | FE_D3_CRCERR | \ 188 FE_D3_ALGERR | FE_D3_SRTPKT | FE_D3_PKTRDY) 189 190 /* Maximum number of iterrations for a receive interrupt. */ 191 #define FE_MAX_RECV_COUNT ((65536 - 2048 * 2) / 64) 192 /* Maximum size of SRAM is 65536, 193 * minimum size of transmission buffer in fe is 2x2KB, 194 * and minimum amount of received packet including headers 195 * added by the chip is 64 bytes. 196 * Hence FE_MAX_RECV_COUNT is the upper limit for number 197 * of packets in the receive buffer. */ 198 199 void mb86960_attach __P((struct mb86960_softc *, enum mb86960_type, 200 u_int8_t *)); 201 void mb86960_config __P((struct mb86960_softc *, int *, int, int)); 202 int mb86960_intr __P((void *)); 203 int mb86960_enable __P((struct mb86960_softc *)); 204 void mb86960_disable __P((struct mb86960_softc *)); 205 int mb86960_activate __P((struct device *, enum devact)); 206 int mb86960_detach __P((struct mb86960_softc *)); 207 void mb86965_read_eeprom __P((bus_space_tag_t, bus_space_handle_t, 208 u_int8_t *)); 209
Indexes created Mon Sep 29 21:09:56 GMT 2025