mb86960var.h revision 1.37
1 /* $NetBSD: mb86960var.h,v 1.37 2009/05/12 14:25:17 cegger Exp $ */ 2 3 /* 4 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995 5 * 6 * This software may be used, modified, copied, distributed, and sold, in 7 * both source and binary form provided that the above copyright, these 8 * terms and the following disclaimer are retained. The name of the author 9 * and/or the contributor may not be used to endorse or promote products 10 * derived from this software without specific prior written permission. 11 * 12 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND 13 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 14 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 15 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE 16 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 17 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 18 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION. 19 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 20 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 21 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 22 * SUCH DAMAGE. 23 */ 24 25 /* 26 * Portions copyright (C) 1993, David Greenman. This software may be used, 27 * modified, copied, distributed, and sold, in both source and binary form 28 * provided that the above copyright and these terms are retained. Under no 29 * circumstances is the author responsible for the proper functioning of this 30 * software, nor does the author assume any responsibility for damages 31 * incurred with its use. 32 */ 33 34 /* 35 * Device driver for Fujitsu MB86960A/MB86965A based Ethernet cards. 36 * Contributed by M.S. <seki (at) sysrap.cs.fujitsu.co.jp> 37 * 38 * This version is intended to be a generic template for various 39 * MB86960A/MB86965A based Ethernet cards. It currently supports 40 * Fujitsu FMV-180 series (i.e., FMV-181 and FMV-182) and Allied- 41 * Telesis AT1700 series and RE2000 series. There are some 42 * unnecessary hooks embedded, which are primarily intended to support 43 * other types of Ethernet cards, but the author is not sure whether 44 * they are useful. 45 */ 46 47 #include "rnd.h" 48 49 #if NRND > 0 50 #include <sys/rnd.h> 51 #endif 52 53 /* 54 * Default settings for fe driver specific options. 55 * They can be set in config file by "options" statements. 56 */ 57 58 /* 59 * Debug control. 60 * 0: No debug at all. All debug specific codes are stripped off. 61 * 1: Silent. No debug messages are logged except emergent ones. 62 * 2: Brief. Lair events and/or important information are logged. 63 * 3: Detailed. Logs all information which *may* be useful for debugging. 64 * 4: Trace. All actions in the driver is logged. Super verbose. 65 */ 66 #ifndef FE_DEBUG 67 #define FE_DEBUG 1 68 #endif 69 70 /* 71 * Delay padding of short transmission packets to minimum Ethernet size. 72 * This may or may not gain performance. An EXPERIMENTAL option. 73 */ 74 #ifndef FE_DELAYED_PADDING 75 #define FE_DELAYED_PADDING 0 76 #endif 77 78 /* 79 * Transmit just one packet per a "send" command to 86960. 80 * This option is intended for performance test. An EXPERIMENTAL option. 81 */ 82 #ifndef FE_SINGLE_TRANSMISSION 83 #define FE_SINGLE_TRANSMISSION 0 84 #endif 85 86 /* 87 * Device configuration flags. 88 */ 89 90 /* DLCR6 settings. */ 91 #define FE_FLAGS_DLCR6_VALUE 0x007F 92 93 /* Force DLCR6 override. */ 94 #define FE_FLAGS_OVERRIDE_DLCR6 0x0080 95 96 /* 97 * Supported hardware (Ethernet card) types 98 * This information is currently used only for debugging 99 */ 100 enum fe_type { 101 /* For cards which are successfully probed but not identified. */ 102 FE_TYPE_UNKNOWN = 0, 103 104 /* Fujitsu FMV-180 series. */ 105 FE_TYPE_FMV181, 106 FE_TYPE_FMV181A, 107 FE_TYPE_FMV182, 108 FE_TYPE_FMV182A, 109 FE_TYPE_FMV183, 110 FE_TYPE_FMV184, 111 112 /* Allied-Telesis AT1700 series and RE2000 series. */ 113 FE_TYPE_AT1700T, 114 FE_TYPE_AT1700BT, 115 FE_TYPE_AT1700FT, 116 FE_TYPE_AT1700AT, 117 FE_TYPE_AT_UNKNOWN, 118 119 /* PCMCIA by Fujitsu. */ 120 FE_TYPE_MBH10302, 121 FE_TYPE_MBH10304 122 }; 123 124 /* 125 * fe_softc: per line info and status 126 */ 127 struct mb86960_softc { 128 device_t sc_dev; 129 struct ethercom sc_ec; /* ethernet common */ 130 struct ifmedia sc_media; /* supported media information */ 131 132 bus_space_tag_t sc_bst; /* bus space */ 133 bus_space_handle_t sc_bsh; 134 135 /* Set by probe() and not modified in later phases. */ 136 uint32_t sc_flags; /* controller quirks */ 137 #define FE_FLAGS_MB86960 0x0001 /* DLCR7 is differnt on MB86960 */ 138 #define FE_FLAGS_SBW_BYTE 0x0002 /* byte access mode for system bus */ 139 #define FE_FLAGS_SRAM_150ns 0x0004 /* The board has slow SRAM */ 140 141 uint8_t proto_dlcr4; /* DLCR4 prototype. */ 142 uint8_t proto_dlcr5; /* DLCR5 prototype. */ 143 uint8_t proto_dlcr6; /* DLCR6 prototype. */ 144 uint8_t proto_dlcr7; /* DLCR7 prototype. */ 145 uint8_t proto_bmpr13; /* BMPR13 prototype. */ 146 147 /* Vendor specific hooks. */ 148 void (*init_card)(struct mb86960_softc *); 149 void (*stop_card)(struct mb86960_softc *); 150 151 /* Transmission buffer management. */ 152 int txb_size; /* total bytes in TX buffer */ 153 int txb_free; /* free bytes in TX buffer */ 154 int txb_count; /* number of packets in TX buffer */ 155 int txb_sched; /* number of scheduled packets */ 156 int txb_padding; /* number of delayed padding bytes */ 157 158 /* Multicast address filter management. */ 159 int filter_change; /* MARs must be changed ASAP. */ 160 uint8_t filter[FE_FILTER_LEN]; /* new filter value. */ 161 162 uint8_t sc_enaddr[ETHER_ADDR_LEN]; 163 164 #if NRND > 0 165 rndsource_element_t rnd_source; 166 #endif 167 168 uint32_t sc_stat; /* driver status */ 169 #define FE_STAT_ENABLED 0x0001 /* power enabled on interface */ 170 #define FE_STAT_ATTACHED 0x0002 /* attach has succeeded */ 171 172 int (*sc_enable)(struct mb86960_softc *); 173 void (*sc_disable)(struct mb86960_softc *); 174 175 int (*sc_mediachange)(struct mb86960_softc *); 176 void (*sc_mediastatus)(struct mb86960_softc *, struct ifmediareq *); 177 }; 178 179 /* 180 * Fe driver specific constants which relate to 86960/86965. 181 */ 182 183 /* Interrupt masks. */ 184 #define FE_TMASK (FE_D2_COLL16 | FE_D2_TXDONE) 185 #define FE_RMASK (FE_D3_OVRFLO | FE_D3_CRCERR | \ 186 FE_D3_ALGERR | FE_D3_SRTPKT | FE_D3_PKTRDY) 187 188 /* Maximum number of iterrations for a receive interrupt. */ 189 #define FE_MAX_RECV_COUNT ((65536 - 2048 * 2) / 64) 190 /* Maximum size of SRAM is 65536, 191 * minimum size of transmission buffer in fe is 2x2KB, 192 * and minimum amount of received packet including headers 193 * added by the chip is 64 bytes. 194 * Hence FE_MAX_RECV_COUNT is the upper limit for number 195 * of packets in the receive buffer. */ 196 197 void mb86960_attach(struct mb86960_softc *, uint8_t *); 198 void mb86960_config(struct mb86960_softc *, int *, int, int); 199 int mb86960_intr(void *); 200 int mb86960_enable(struct mb86960_softc *); 201 void mb86960_disable(struct mb86960_softc *); 202 int mb86960_activate(device_t, enum devact); 203 int mb86960_detach(struct mb86960_softc *); 204 void mb86965_read_eeprom(bus_space_tag_t, bus_space_handle_t, uint8_t *); 205
Indexes created Tue Sep 30 17:09:57 GMT 2025