Home | History | Annotate | Line # | Download | only in ic
ninjaata32.c revision 1.18.2.1
      1  1.18.2.1  jdolecek /*	$NetBSD: ninjaata32.c,v 1.18.2.1 2017/12/03 11:37:03 jdolecek Exp $	*/
      2       1.1     itohy 
      3       1.1     itohy /*
      4      1.13     itohy  * Copyright (c) 2006 ITOH Yasufumi.
      5       1.1     itohy  * All rights reserved.
      6       1.1     itohy  *
      7       1.1     itohy  * Redistribution and use in source and binary forms, with or without
      8       1.1     itohy  * modification, are permitted provided that the following conditions
      9       1.1     itohy  * are met:
     10       1.1     itohy  * 1. Redistributions of source code must retain the above copyright
     11       1.1     itohy  *    notice, this list of conditions and the following disclaimer.
     12       1.1     itohy  * 2. Redistributions in binary form must reproduce the above copyright
     13       1.1     itohy  *    notice, this list of conditions and the following disclaimer in the
     14       1.1     itohy  *    documentation and/or other materials provided with the distribution.
     15       1.1     itohy  *
     16       1.1     itohy  * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS''
     17       1.1     itohy  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
     18       1.1     itohy  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     19       1.1     itohy  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS
     20       1.1     itohy  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     21       1.1     itohy  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     22       1.1     itohy  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     23       1.1     itohy  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     24       1.1     itohy  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     25       1.1     itohy  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
     26       1.1     itohy  * THE POSSIBILITY OF SUCH DAMAGE.
     27       1.1     itohy  */
     28       1.1     itohy 
     29       1.1     itohy #include <sys/cdefs.h>
     30  1.18.2.1  jdolecek __KERNEL_RCSID(0, "$NetBSD: ninjaata32.c,v 1.18.2.1 2017/12/03 11:37:03 jdolecek Exp $");
     31       1.1     itohy 
     32       1.1     itohy #include <sys/param.h>
     33       1.1     itohy #include <sys/kernel.h>
     34       1.1     itohy #include <sys/device.h>
     35       1.8        ad #include <sys/proc.h>
     36       1.1     itohy 
     37       1.9        ad #include <sys/bus.h>
     38       1.9        ad #include <sys/intr.h>
     39       1.1     itohy 
     40       1.1     itohy #include <dev/ata/atavar.h>
     41       1.1     itohy #include <dev/ic/wdcreg.h>
     42       1.1     itohy #include <dev/ic/wdcvar.h>
     43       1.1     itohy 
     44       1.1     itohy #include <dev/ic/ninjaata32reg.h>
     45       1.1     itohy #include <dev/ic/ninjaata32var.h>
     46       1.1     itohy 
     47       1.1     itohy #ifdef NJATA32_DEBUG
     48       1.1     itohy #define DPRINTF(x)	printf x
     49       1.1     itohy #else
     50       1.1     itohy #define DPRINTF(x)
     51       1.1     itohy #endif
     52       1.1     itohy 
     53       1.1     itohy static void	njata32_init(struct njata32_softc *, int nosleep);
     54       1.1     itohy static void	njata32_irqack(struct ata_channel *);
     55       1.1     itohy static void	njata32_clearirq(struct ata_channel *, int);
     56       1.1     itohy static void	njata32_setup_channel(struct ata_channel *);
     57       1.1     itohy static int	njata32_dma_init(void *, int channel, int drive,
     58       1.1     itohy 		    void *databuf, size_t datalen, int flags);
     59       1.1     itohy static void	njata32_piobm_start(void *, int channel, int drive, int skip,
     60       1.1     itohy 		    int xferlen, int flags);
     61       1.1     itohy static int	njata32_dma_finish(void *, int channel, int drive, int force);
     62       1.1     itohy static void	njata32_piobm_done(void *, int channel, int drive);
     63       1.1     itohy 
     64       1.1     itohy #if 0	/* ATA DMA is currently unused */
     65       1.1     itohy static const uint8_t njata32_timing_dma[NJATA32_MODE_MAX_DMA + 1] = {
     66       1.1     itohy 	NJATA32_TIMING_DMA0, NJATA32_TIMING_DMA1, NJATA32_TIMING_DMA2
     67       1.1     itohy };
     68       1.1     itohy #endif
     69       1.1     itohy static const uint8_t njata32_timing_pio[NJATA32_MODE_MAX_PIO + 1] = {
     70       1.1     itohy 	NJATA32_TIMING_PIO0, NJATA32_TIMING_PIO1, NJATA32_TIMING_PIO2,
     71       1.1     itohy 	NJATA32_TIMING_PIO3, NJATA32_TIMING_PIO4
     72       1.1     itohy };
     73       1.1     itohy 
     74       1.1     itohy static void
     75      1.10      cube njata32_init(struct njata32_softc *sc, int nosleep)
     76       1.1     itohy {
     77       1.1     itohy 
     78       1.1     itohy 	/* disable interrupts */
     79       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
     80       1.1     itohy 	    NJATA32_REG_IRQ_SELECT, 0);
     81       1.1     itohy 
     82       1.1     itohy 	/* bus reset */
     83       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
     84       1.1     itohy 	    NJATA32_AS_WAIT0 | NJATA32_AS_BUS_RESET);
     85       1.1     itohy 	if (nosleep)
     86       1.1     itohy 		delay(50000);
     87       1.1     itohy 	else
     88       1.1     itohy 		tsleep(sc, PRIBIO, "njaini", mstohz(50));
     89       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
     90       1.1     itohy 	    NJATA32_AS_WAIT0);
     91       1.1     itohy 
     92       1.1     itohy 	/* initial transfer speed */
     93       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
     94       1.2     itohy 	    NJATA32_REG_TIMING, NJATA32_TIMING_PIO0 + sc->sc_atawait);
     95       1.1     itohy 
     96       1.1     itohy 	/* setup busmaster mode */
     97       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_IOBM,
     98       1.1     itohy 	    NJATA32_IOBM_DEFAULT);
     99       1.1     itohy 
    100       1.1     itohy 	/* enable interrupts */
    101       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    102       1.1     itohy 	    NJATA32_REG_IRQ_SELECT, NJATA32_IRQ_XFER | NJATA32_IRQ_DEV);
    103       1.1     itohy }
    104       1.1     itohy 
    105       1.1     itohy void
    106      1.10      cube njata32_attach(struct njata32_softc *sc)
    107       1.1     itohy {
    108       1.1     itohy 	bus_addr_t dmaaddr;
    109       1.1     itohy 	int i, devno, error;
    110       1.1     itohy 	struct wdc_regs *wdr;
    111       1.1     itohy 
    112       1.1     itohy 	/*
    113       1.1     itohy 	 * allocate DMA resource
    114       1.1     itohy 	 */
    115       1.1     itohy 	if ((error = bus_dmamem_alloc(sc->sc_dmat,
    116       1.1     itohy 	    sizeof(struct njata32_dma_page), PAGE_SIZE, 0,
    117       1.1     itohy 	    &sc->sc_sgt_seg, 1, &sc->sc_sgt_nsegs, BUS_DMA_NOWAIT)) != 0) {
    118      1.10      cube 		aprint_error("%s: unable to allocate sgt page, error = %d\n",
    119       1.1     itohy 		    NJATA32NAME(sc), error);
    120       1.1     itohy 		return;
    121       1.1     itohy 	}
    122       1.1     itohy 	if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_sgt_seg,
    123       1.1     itohy 	    sc->sc_sgt_nsegs, sizeof(struct njata32_dma_page),
    124       1.7  christos 	    (void **)&sc->sc_sgtpg,
    125       1.1     itohy 	    BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) {
    126      1.10      cube 		aprint_error("%s: unable to map sgt page, error = %d\n",
    127       1.1     itohy 		    NJATA32NAME(sc), error);
    128       1.1     itohy 		goto fail1;
    129       1.1     itohy 	}
    130       1.1     itohy 	if ((error = bus_dmamap_create(sc->sc_dmat,
    131       1.1     itohy 	    sizeof(struct njata32_dma_page), 1,
    132       1.1     itohy 	    sizeof(struct njata32_dma_page), 0, BUS_DMA_NOWAIT,
    133       1.1     itohy 	    &sc->sc_dmamap_sgt)) != 0) {
    134      1.10      cube 		aprint_error("%s: unable to create sgt DMA map, error = %d\n",
    135       1.1     itohy 		    NJATA32NAME(sc), error);
    136       1.1     itohy 		goto fail2;
    137       1.1     itohy 	}
    138       1.1     itohy 	if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_sgt,
    139       1.1     itohy 	    sc->sc_sgtpg, sizeof(struct njata32_dma_page),
    140       1.1     itohy 	    NULL, BUS_DMA_NOWAIT)) != 0) {
    141      1.10      cube 		aprint_error("%s: unable to load sgt DMA map, error = %d\n",
    142       1.1     itohy 		    NJATA32NAME(sc), error);
    143       1.1     itohy 		goto fail3;
    144       1.1     itohy 	}
    145       1.1     itohy 
    146       1.1     itohy 	dmaaddr = sc->sc_dmamap_sgt->dm_segs[0].ds_addr;
    147       1.1     itohy 
    148       1.1     itohy 	for (devno = 0; devno < NJATA32_NUM_DEV; devno++) {
    149       1.1     itohy 		sc->sc_dev[devno].d_sgt = sc->sc_sgtpg->dp_sg[devno];
    150       1.1     itohy 		sc->sc_dev[devno].d_sgt_dma = dmaaddr +
    151       1.1     itohy 		    offsetof(struct njata32_dma_page, dp_sg[devno]);
    152       1.1     itohy 
    153       1.1     itohy 		error = bus_dmamap_create(sc->sc_dmat,
    154       1.1     itohy 		    NJATA32_MAX_XFER,		/* max total map size */
    155       1.1     itohy 		    NJATA32_NUM_SG,		/* max number of segments */
    156       1.1     itohy 		    NJATA32_SGT_MAXSEGLEN,	/* max size of a segment */
    157       1.1     itohy 		    0,				/* boundary */
    158       1.1     itohy 		    BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
    159       1.1     itohy 		    &sc->sc_dev[devno].d_dmamap_xfer);
    160       1.1     itohy 		if (error) {
    161      1.10      cube 			aprint_error("%s: failed to create DMA map "
    162      1.10      cube 			    "(error = %d)\n", NJATA32NAME(sc), error);
    163       1.1     itohy 			goto fail4;
    164       1.1     itohy 		}
    165       1.1     itohy 	}
    166       1.1     itohy 
    167       1.1     itohy 	/* device properties */
    168       1.1     itohy 	sc->sc_wdcdev.sc_atac.atac_cap =
    169       1.1     itohy 	    ATAC_CAP_DATA16 | ATAC_CAP_DATA32 | ATAC_CAP_PIOBM;
    170       1.1     itohy 	sc->sc_wdcdev.irqack = njata32_irqack;
    171       1.1     itohy 	sc->sc_wdcdev.sc_atac.atac_channels = sc->sc_wdc_chanarray;
    172       1.1     itohy 	sc->sc_wdcdev.sc_atac.atac_nchannels = NJATA32_NCHAN;	/* 1 */
    173       1.1     itohy 	sc->sc_wdcdev.sc_atac.atac_pio_cap = NJATA32_MODE_MAX_PIO;
    174       1.1     itohy #if 0	/* ATA DMA is currently unused */
    175       1.1     itohy 	sc->sc_wdcdev.sc_atac.atac_dma_cap = NJATA32_MODE_MAX_DMA;
    176       1.1     itohy #endif
    177       1.1     itohy 	sc->sc_wdcdev.sc_atac.atac_set_modes = njata32_setup_channel;
    178       1.1     itohy 
    179       1.1     itohy 	/* DMA control functions */
    180       1.1     itohy 	sc->sc_wdcdev.dma_arg = sc;
    181       1.1     itohy 	sc->sc_wdcdev.dma_init = njata32_dma_init;
    182       1.1     itohy 	sc->sc_wdcdev.piobm_start = njata32_piobm_start;
    183       1.1     itohy 	sc->sc_wdcdev.dma_finish = njata32_dma_finish;
    184       1.1     itohy 	sc->sc_wdcdev.piobm_done = njata32_piobm_done;
    185       1.1     itohy 
    186       1.1     itohy 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_NO_EXTRA_RESETS;
    187       1.1     itohy 
    188       1.1     itohy 	sc->sc_wdcdev.regs = wdr = &sc->sc_wdc_regs;
    189       1.1     itohy 
    190       1.1     itohy 	/* only one channel */
    191       1.1     itohy 	sc->sc_wdc_chanarray[0] = &sc->sc_ch[0].ch_ata_channel;
    192       1.1     itohy 	sc->sc_ch[0].ch_ata_channel.ch_channel = 0;
    193       1.1     itohy 	sc->sc_ch[0].ch_ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
    194      1.18    bouyer 	sc->sc_wdcdev.wdc_maxdrives = 2; /* max number of drives per channel */
    195       1.1     itohy 
    196       1.1     itohy 	/* map ATA registers */
    197       1.1     itohy 	for (i = 0; i < WDC_NREG; i++) {
    198       1.1     itohy 		if (bus_space_subregion(NJATA32_REGT(sc), NJATA32_REGH(sc),
    199       1.1     itohy 		    NJATA32_OFFSET_WDCREGS + i,
    200       1.1     itohy 		    i == wd_data ? 4 : 1, &wdr->cmd_iohs[i]) != 0) {
    201       1.1     itohy 			aprint_error("%s: couldn't subregion cmd regs\n",
    202       1.1     itohy 			    NJATA32NAME(sc));
    203       1.1     itohy 			goto fail4;
    204       1.1     itohy 		}
    205       1.1     itohy 	}
    206  1.18.2.1  jdolecek 	wdc_init_shadow_regs(wdr);
    207       1.1     itohy 	wdr->data32iot = NJATA32_REGT(sc);
    208       1.1     itohy 	wdr->data32ioh = wdr->cmd_iohs[wd_data];
    209       1.1     itohy 
    210       1.1     itohy 	/* map ATA ctl reg */
    211       1.1     itohy 	wdr->ctl_iot = NJATA32_REGT(sc);
    212       1.1     itohy 	if (bus_space_subregion(NJATA32_REGT(sc), NJATA32_REGH(sc),
    213       1.1     itohy 	    NJATA32_REG_WD_ALTSTATUS, 1, &wdr->ctl_ioh) != 0) {
    214       1.1     itohy 		aprint_error("%s: couldn't subregion ctl regs\n",
    215       1.1     itohy 		    NJATA32NAME(sc));
    216       1.1     itohy 		goto fail4;
    217       1.1     itohy 	}
    218       1.1     itohy 
    219       1.1     itohy 	sc->sc_flags |= NJATA32_CMDPG_MAPPED;
    220       1.1     itohy 
    221       1.1     itohy 	/* use flags value as busmaster wait */
    222       1.2     itohy 	if ((sc->sc_atawait =
    223      1.10      cube 	    (uint8_t)device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags))
    224       1.2     itohy 		aprint_normal("%s: ATA wait = %#x\n",
    225       1.2     itohy 		    NJATA32NAME(sc), sc->sc_atawait);
    226       1.1     itohy 
    227       1.1     itohy 	njata32_init(sc, cold);
    228       1.1     itohy 
    229       1.1     itohy 	wdcattach(&sc->sc_ch[0].ch_ata_channel);
    230       1.1     itohy 
    231       1.1     itohy 	return;
    232       1.1     itohy 
    233       1.1     itohy 	/*
    234       1.1     itohy 	 * cleanup
    235       1.1     itohy 	 */
    236       1.1     itohy fail4:	while (--devno >= 0) {
    237       1.1     itohy 		bus_dmamap_destroy(sc->sc_dmat,
    238       1.1     itohy 		    sc->sc_dev[devno].d_dmamap_xfer);
    239       1.1     itohy 	}
    240       1.1     itohy 	bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap_sgt);
    241       1.1     itohy fail3:	bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap_sgt);
    242       1.7  christos fail2:	bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_sgtpg,
    243       1.1     itohy 	    sizeof(struct njata32_dma_page));
    244       1.1     itohy fail1:	bus_dmamem_free(sc->sc_dmat, &sc->sc_sgt_seg, sc->sc_sgt_nsegs);
    245       1.1     itohy }
    246       1.1     itohy 
    247       1.1     itohy int
    248      1.10      cube njata32_detach(struct njata32_softc *sc, int flags)
    249       1.1     itohy {
    250       1.1     itohy 	int rv, devno;
    251       1.1     itohy 
    252       1.1     itohy 	if (sc->sc_flags & NJATA32_CMDPG_MAPPED) {
    253      1.10      cube 		if ((rv = wdcdetach(sc->sc_wdcdev.sc_atac.atac_dev, flags)))
    254       1.1     itohy 			return rv;
    255       1.1     itohy 
    256       1.1     itohy 		/* free DMA resource */
    257       1.1     itohy 		for (devno = 0; devno < NJATA32_NUM_DEV; devno++) {
    258       1.1     itohy 			bus_dmamap_destroy(sc->sc_dmat,
    259       1.1     itohy 			    sc->sc_dev[devno].d_dmamap_xfer);
    260       1.1     itohy 		}
    261       1.1     itohy 		bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap_sgt);
    262       1.1     itohy 		bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap_sgt);
    263       1.7  christos 		bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_sgtpg,
    264       1.1     itohy 		    sizeof(struct njata32_dma_page));
    265       1.1     itohy 		bus_dmamem_free(sc->sc_dmat, &sc->sc_sgt_seg, sc->sc_sgt_nsegs);
    266       1.1     itohy 	}
    267       1.1     itohy 
    268       1.1     itohy 	return 0;
    269       1.1     itohy }
    270       1.1     itohy 
    271       1.1     itohy static void
    272      1.10      cube njata32_irqack(struct ata_channel *chp)
    273       1.1     itohy {
    274       1.1     itohy 	struct njata32_softc *sc = (void *)chp->ch_atac;
    275       1.1     itohy 
    276       1.1     itohy 	/* disable busmaster */
    277       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    278       1.2     itohy 	    NJATA32_REG_BM, NJATA32_BM_WAIT0);
    279       1.1     itohy }
    280       1.1     itohy 
    281       1.1     itohy static void
    282      1.10      cube njata32_clearirq(struct ata_channel *chp, int irq)
    283       1.1     itohy {
    284       1.1     itohy 	struct njata32_softc *sc = (void *)chp->ch_atac;
    285       1.1     itohy 
    286      1.10      cube 	aprint_error("%s: unhandled intr: irq %#x, bm %#x, ",
    287       1.1     itohy 	    NJATA32NAME(sc), irq,
    288       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    289       1.1     itohy 		NJATA32_REG_BM));
    290       1.1     itohy 
    291       1.1     itohy 	/* disable busmaster */
    292       1.1     itohy 	njata32_irqack(chp);
    293       1.1     itohy 
    294       1.1     itohy 	/* clear device interrupt */
    295      1.10      cube 	aprint_normal("err %#x, seccnt %#x, cyl %#x, sdh %#x, ",
    296       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    297       1.1     itohy 		NJATA32_REG_WD_ERROR),
    298       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    299       1.1     itohy 		NJATA32_REG_WD_SECCNT),
    300       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    301       1.1     itohy 		NJATA32_REG_WD_CYL_LO) |
    302       1.1     itohy 	    (bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    303       1.1     itohy 		NJATA32_REG_WD_CYL_HI) << 8),
    304       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    305       1.1     itohy 		NJATA32_REG_WD_SDH));
    306      1.10      cube 	aprint_normal("status %#x\n",
    307       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    308       1.1     itohy 	    NJATA32_REG_WD_STATUS));
    309       1.1     itohy }
    310       1.1     itohy 
    311       1.1     itohy static void
    312      1.10      cube njata32_setup_channel(struct ata_channel *chp)
    313       1.1     itohy {
    314       1.1     itohy 	struct njata32_softc *sc = (void *)chp->ch_atac;
    315       1.1     itohy 	struct ata_drive_datas *drvp;
    316       1.1     itohy 	int drive;
    317       1.1     itohy 	uint8_t mode;
    318       1.1     itohy 
    319      1.18    bouyer 	KASSERT(chp->ch_ndrives != 0);
    320       1.1     itohy 
    321       1.1     itohy 	sc->sc_timing_pio = 0;
    322       1.1     itohy #if 0	/* ATA DMA is currently unused */
    323       1.1     itohy 	sc->sc_timing_dma = 0;
    324       1.1     itohy #endif
    325       1.1     itohy 
    326      1.18    bouyer 	for (drive = 0; drive < chp->ch_ndrives; drive++) {
    327       1.1     itohy 		drvp = &chp->ch_drive[drive];
    328      1.18    bouyer 		if (drvp->drive_type == ATA_DRIVET_NONE)
    329       1.1     itohy 			continue;	/* no drive */
    330       1.1     itohy 
    331       1.1     itohy #if 0	/* ATA DMA is currently unused */
    332      1.18    bouyer 		if ((drvp->drive_flags & ATA_DRIVE_DMA) != 0) {
    333       1.1     itohy 			/*
    334       1.1     itohy 			 * Multiword DMA
    335       1.1     itohy 			 */
    336       1.1     itohy 			if ((mode = drvp->DMA_mode) > NJATA32_MODE_MAX_DMA)
    337       1.1     itohy 				mode = NJATA32_MODE_MAX_DMA;
    338       1.1     itohy 			if (sc->sc_timing_dma < njata32_timing_dma[mode])
    339       1.1     itohy 				sc->sc_timing_dma = njata32_timing_dma[mode];
    340       1.1     itohy 		}
    341       1.1     itohy #endif
    342       1.1     itohy 		/*
    343       1.1     itohy 		 * PIO
    344       1.1     itohy 		 */
    345       1.1     itohy 		if ((mode = drvp->PIO_mode) > NJATA32_MODE_MAX_PIO)
    346       1.1     itohy 			mode = NJATA32_MODE_MAX_PIO;
    347       1.1     itohy 		if (sc->sc_timing_pio < njata32_timing_pio[mode])
    348       1.1     itohy 			sc->sc_timing_pio = njata32_timing_pio[mode];
    349       1.1     itohy 	}
    350       1.1     itohy 
    351       1.2     itohy 	sc->sc_timing_pio += sc->sc_atawait;
    352       1.2     itohy 
    353       1.1     itohy 	/* set timing for PIO */
    354       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    355       1.1     itohy 	    NJATA32_REG_TIMING, sc->sc_timing_pio);
    356       1.1     itohy }
    357       1.1     itohy 
    358       1.1     itohy /*
    359       1.1     itohy  * map DMA buffer
    360       1.1     itohy  */
    361       1.1     itohy int
    362       1.5  christos njata32_dma_init(void *v, int channel, int drive, void *databuf,
    363       1.4    dogcow 		 size_t datalen, int flags)
    364       1.1     itohy {
    365       1.1     itohy 	struct njata32_softc *sc = v;
    366       1.1     itohy 	int error;
    367       1.1     itohy 	struct njata32_device *dev = &sc->sc_dev[drive];
    368       1.1     itohy 
    369       1.1     itohy 	KASSERT(channel == 0);
    370       1.1     itohy 	KASSERT((dev->d_flags & NJATA32_DEV_DMA_MAPPED) == 0);
    371       1.1     itohy 	KASSERT((dev->d_flags & NJATA32_DEV_DMA_STARTED) == 0);
    372       1.1     itohy 
    373       1.1     itohy 	KASSERT(flags & (WDC_DMA_PIOBM_ATA | WDC_DMA_PIOBM_ATAPI));
    374       1.1     itohy 
    375       1.1     itohy 	/* use PIO for short transfer */
    376       1.1     itohy 	if (datalen < 64 /* needs tune */) {
    377       1.1     itohy 		DPRINTF(("%s: njata32_dma_init: short transfer (%u)\n",
    378       1.1     itohy 		    NJATA32NAME(sc), (unsigned)datalen));
    379       1.1     itohy 		bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    380       1.1     itohy 		    NJATA32_REG_TIMING, sc->sc_timing_pio);
    381       1.1     itohy 		return EINVAL;
    382       1.1     itohy 	}
    383       1.1     itohy 
    384       1.1     itohy 	/* use PIO for unaligned transfer (word alignment seems OK) */
    385       1.1     itohy 	if (((uintptr_t)databuf & 1) || (datalen & 1)) {
    386       1.1     itohy 		DPRINTF(("%s: njata32_dma_init: unaligned: buf %p, len %u\n",
    387       1.1     itohy 		    NJATA32NAME(sc), databuf, (unsigned)datalen));
    388       1.1     itohy 		return EINVAL;
    389       1.1     itohy 	}
    390       1.1     itohy 
    391       1.1     itohy 	DPRINTF(("%s: njata32_dma_init: %s: databuf %p, datalen %u\n",
    392       1.1     itohy 	    NJATA32NAME(sc), (flags & WDC_DMA_READ) ? "read" : "write",
    393       1.1     itohy 	    databuf, (unsigned)datalen));
    394       1.1     itohy 
    395       1.1     itohy 	error = bus_dmamap_load(sc->sc_dmat, dev->d_dmamap_xfer,
    396       1.1     itohy 	    databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
    397       1.1     itohy 	    ((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
    398       1.1     itohy 	if (error) {
    399       1.1     itohy 		printf("%s: load xfer failed, error %d\n",
    400       1.1     itohy 		    NJATA32NAME(sc), error);
    401       1.1     itohy 		return error;
    402       1.1     itohy 	}
    403       1.1     itohy 
    404       1.1     itohy 	bus_dmamap_sync(sc->sc_dmat, dev->d_dmamap_xfer, 0,
    405       1.1     itohy 	    dev->d_dmamap_xfer->dm_mapsize,
    406       1.1     itohy 	    (flags & WDC_DMA_READ) ?
    407       1.1     itohy 		BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
    408       1.1     itohy 
    409       1.1     itohy 	dev->d_flags =
    410       1.1     itohy 	    ((flags & WDC_DMA_READ) ? NJATA32_DEV_DMA_READ : 0) |
    411       1.1     itohy 	    ((flags & WDC_DMA_PIOBM_ATAPI) ? NJATA32_DEV_DMA_ATAPI : 0) |
    412       1.1     itohy 	    NJATA32_DEV_DMA_MAPPED;
    413       1.1     itohy 
    414       1.1     itohy 	return 0;
    415       1.1     itohy }
    416       1.1     itohy 
    417       1.1     itohy /*
    418       1.1     itohy  * start DMA
    419       1.1     itohy  *
    420       1.1     itohy  * top:  databuf + skip
    421       1.1     itohy  * size: xferlen
    422       1.1     itohy  */
    423       1.1     itohy void
    424       1.5  christos njata32_piobm_start(void *v, int channel, int drive,
    425       1.4    dogcow 		    int skip, int xferlen, int flags)
    426       1.1     itohy {
    427       1.1     itohy 	struct njata32_softc *sc = v;
    428       1.1     itohy 	struct njata32_device *dev = &sc->sc_dev[drive];
    429       1.1     itohy 	int i, nsegs, seglen;
    430       1.1     itohy 	uint8_t bmreg;
    431       1.1     itohy 
    432       1.1     itohy 	DPRINTF(("%s: njata32_piobm_start: ch%d, dv%d, skip %d, xferlen %d\n",
    433       1.1     itohy 	    NJATA32NAME(sc), channel, drive, skip, xferlen));
    434       1.1     itohy 
    435       1.1     itohy 	KASSERT(channel == 0);
    436       1.1     itohy 	KASSERT(dev->d_flags & NJATA32_DEV_DMA_MAPPED);
    437       1.1     itohy 	KASSERT((dev->d_flags & NJATA32_DEV_DMA_STARTED) == 0);
    438       1.1     itohy 
    439       1.1     itohy 	/*
    440       1.1     itohy 	 * create scatter/gather table
    441       1.1     itohy 	 * XXX this code may be slow
    442       1.1     itohy 	 */
    443       1.1     itohy 	for (i = nsegs = 0;
    444       1.1     itohy 	    i < dev->d_dmamap_xfer->dm_nsegs && xferlen > 0; i++) {
    445       1.1     itohy 		if (dev->d_dmamap_xfer->dm_segs[i].ds_len <= skip) {
    446       1.1     itohy 			skip -= dev->d_dmamap_xfer->dm_segs[i].ds_len;
    447       1.1     itohy 			continue;
    448       1.1     itohy 		}
    449       1.1     itohy 
    450       1.1     itohy 		seglen = dev->d_dmamap_xfer->dm_segs[i].ds_len - skip;
    451       1.1     itohy 		if (seglen > xferlen)
    452       1.1     itohy 			seglen = xferlen;
    453       1.1     itohy 
    454       1.1     itohy 		dev->d_sgt[nsegs].sg_addr =
    455       1.1     itohy 		    htole32(dev->d_dmamap_xfer->dm_segs[i].ds_addr + skip);
    456       1.1     itohy 		dev->d_sgt[nsegs].sg_len = htole32(seglen);
    457       1.1     itohy 
    458       1.1     itohy 		xferlen -= seglen;
    459       1.1     itohy 		nsegs++;
    460       1.1     itohy 		skip = 0;
    461       1.1     itohy 	}
    462       1.1     itohy 	sc->sc_piobm_nsegs = nsegs;
    463       1.1     itohy 	/* end mark */
    464       1.1     itohy 	dev->d_sgt[nsegs - 1].sg_len |= htole32(NJATA32_SGT_ENDMARK);
    465       1.1     itohy 
    466       1.1     itohy #ifdef DIAGNOSTIC
    467       1.1     itohy 	if (xferlen)
    468       1.1     itohy 		panic("%s: njata32_piobm_start: xferlen residue %d\n",
    469       1.1     itohy 		    NJATA32NAME(sc), xferlen);
    470       1.1     itohy #endif
    471       1.1     itohy 
    472       1.1     itohy 	bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_sgt,
    473       1.1     itohy 	    (char *)dev->d_sgt - (char *)sc->sc_sgtpg,
    474       1.1     itohy 	    sizeof(struct njata32_sgtable) * nsegs,
    475       1.1     itohy 	    BUS_DMASYNC_PREWRITE);
    476       1.1     itohy 
    477       1.1     itohy 	/* set timing for PIO */
    478       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    479       1.1     itohy 	    NJATA32_REG_TIMING, sc->sc_timing_pio);
    480       1.1     itohy 
    481       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_IOBM,
    482       1.1     itohy 	    NJATA32_IOBM_DEFAULT);
    483       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
    484       1.1     itohy 	    NJATA32_AS_WAIT0);
    485       1.1     itohy 
    486       1.1     itohy 	/*
    487       1.1     itohy 	 * interrupt configuration
    488       1.1     itohy 	 */
    489       1.1     itohy 	if ((dev->d_flags & (NJATA32_DEV_DMA_READ | NJATA32_DEV_DMA_ATAPI)) ==
    490       1.1     itohy 	    NJATA32_DEV_DMA_READ) {
    491       1.1     itohy 		/*
    492       1.1     itohy 		 * ATA piobm read is executed while device interrupt is active,
    493       1.1     itohy 		 * so disable device interrupt here
    494       1.1     itohy 		 */
    495       1.1     itohy 		bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    496       1.1     itohy 		    NJATA32_REG_IRQ_SELECT, NJATA32_IRQ_XFER);
    497       1.1     itohy 	}
    498       1.1     itohy 
    499       1.1     itohy 	/* enable scatter/gather busmaster transfer */
    500       1.2     itohy 	bmreg = NJATA32_BM_EN | NJATA32_BM_SG | NJATA32_BM_WAIT0 |
    501       1.1     itohy 	    ((dev->d_flags & NJATA32_DEV_DMA_READ) ? NJATA32_BM_RD : 0);
    502       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_BM,
    503       1.1     itohy 	    bmreg);
    504       1.1     itohy 
    505       1.1     itohy 	/* load scatter/gather table */
    506       1.1     itohy 	bus_space_write_4(NJATA32_REGT(sc), NJATA32_REGH(sc),
    507       1.1     itohy 	    NJATA32_REG_DMAADDR, dev->d_sgt_dma);
    508       1.1     itohy 	bus_space_write_4(NJATA32_REGT(sc), NJATA32_REGH(sc),
    509       1.1     itohy 	    NJATA32_REG_DMALENGTH, sizeof(struct njata32_sgtable) * nsegs);
    510       1.1     itohy 
    511       1.1     itohy 	/* start transfer */
    512       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_BM,
    513       1.1     itohy 	    (bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    514       1.1     itohy 		NJATA32_REG_BM)
    515       1.1     itohy 	     & ~(NJATA32_BM_RD|NJATA32_BM_SG|NJATA32_BM_WAIT_MASK)) |
    516       1.1     itohy 	    bmreg | NJATA32_BM_GO);
    517       1.1     itohy 
    518       1.1     itohy 	sc->sc_devflags = dev->d_flags;
    519       1.1     itohy 	if (flags & WDC_PIOBM_XFER_IRQ)
    520       1.1     itohy 		sc->sc_devflags |= NJATA32_DEV_XFER_INTR;
    521       1.1     itohy #ifdef DIAGNOSTIC
    522       1.1     itohy 	dev->d_flags |= NJATA32_DEV_DMA_STARTED;
    523       1.1     itohy #endif
    524       1.1     itohy }
    525       1.1     itohy 
    526       1.1     itohy /*
    527       1.1     itohy  * end of DMA
    528       1.1     itohy  */
    529       1.1     itohy int
    530       1.5  christos njata32_dma_finish(void *v, int channel, int drive,
    531       1.4    dogcow 		   int force)
    532       1.1     itohy {
    533       1.1     itohy 	struct njata32_softc *sc = v;
    534       1.6     itohy 	struct njata32_device *dev = &sc->sc_dev[drive];
    535       1.1     itohy 	int bm;
    536       1.1     itohy 	int error = 0;
    537       1.1     itohy 
    538       1.1     itohy 	DPRINTF(("%s: njata32_dma_finish: bm = %#x\n", NJATA32NAME(sc),
    539       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    540       1.1     itohy 		NJATA32_REG_BM)));
    541       1.1     itohy 
    542       1.1     itohy 	KASSERT(channel == 0);
    543       1.6     itohy 	KASSERT(dev->d_flags & NJATA32_DEV_DMA_MAPPED);
    544       1.6     itohy 	KASSERT(dev->d_flags & NJATA32_DEV_DMA_STARTED);
    545       1.1     itohy 
    546       1.1     itohy 	bm = bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    547       1.1     itohy 	    NJATA32_REG_BM);
    548       1.1     itohy 
    549       1.1     itohy #ifdef NJATA32_DEBUG
    550       1.1     itohy 	printf("%s: irq %#x, bm %#x, 18 %#x, 1c %#x\n", NJATA32NAME(sc),
    551       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    552       1.1     itohy 		NJATA32_REG_IRQ_STAT),
    553       1.1     itohy 	    bm,
    554       1.1     itohy 	    bus_space_read_4(NJATA32_REGT(sc), NJATA32_REGH(sc), 0x18),
    555       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc), 0x1c));
    556       1.1     itohy #endif
    557       1.1     itohy 
    558       1.6     itohy 	bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_sgt,
    559       1.6     itohy 	    (char *)dev->d_sgt - (char *)sc->sc_sgtpg,
    560       1.6     itohy 	    sizeof(struct njata32_sgtable) * sc->sc_piobm_nsegs,
    561       1.6     itohy 	    BUS_DMASYNC_POSTWRITE);
    562       1.6     itohy 
    563       1.1     itohy 	/* check if DMA is active */
    564       1.1     itohy 	if (bm & NJATA32_BM_GO) {
    565       1.1     itohy 		error = WDC_DMAST_NOIRQ;
    566       1.1     itohy 
    567       1.1     itohy 		switch (force) {
    568       1.1     itohy 		case WDC_DMAEND_END:
    569       1.1     itohy 			return error;
    570       1.1     itohy 
    571       1.1     itohy 		case WDC_DMAEND_ABRT:
    572       1.1     itohy 			printf("%s: aborting DMA\n", NJATA32NAME(sc));
    573       1.1     itohy 			break;
    574       1.1     itohy 		}
    575       1.1     itohy 	}
    576       1.1     itohy 
    577       1.1     itohy 	/*
    578       1.1     itohy 	 * ???
    579       1.1     itohy 	 * For unknown reason, PIOBM transfer sometimes fails in the middle,
    580       1.1     itohy 	 * in which case the bit #7 of BM register becomes 0.
    581       1.1     itohy 	 * Increasing the wait value seems to improve the situation.
    582       1.2     itohy 	 *
    583       1.2     itohy 	 * XXX
    584       1.2     itohy 	 * PIO transfer may also fail, but it seems it can't be detected.
    585       1.1     itohy 	 */
    586       1.1     itohy 	if ((bm & NJATA32_BM_DONE) == 0) {
    587       1.1     itohy 		error |= WDC_DMAST_ERR;
    588       1.1     itohy 		printf("%s: busmaster error", NJATA32NAME(sc));
    589       1.2     itohy 		if (sc->sc_atawait < 0x11) {
    590       1.2     itohy 			if ((sc->sc_atawait & 0xf) == 0)
    591       1.2     itohy 				sc->sc_atawait++;
    592       1.2     itohy 			else
    593       1.2     itohy 				sc->sc_atawait += 0x10;
    594       1.2     itohy 			printf(", new ATA wait = %#x", sc->sc_atawait);
    595       1.2     itohy 			njata32_setup_channel(&sc->sc_ch[0].ch_ata_channel);
    596       1.1     itohy 		}
    597       1.1     itohy 		printf("\n");
    598       1.1     itohy 	}
    599       1.1     itohy 
    600       1.1     itohy 	/* stop command */
    601       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
    602       1.1     itohy 	    NJATA32_AS_WAIT0);
    603       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_BM,
    604       1.2     itohy 	    NJATA32_BM_WAIT0);
    605       1.1     itohy 
    606       1.1     itohy 	/* set timing for PIO */
    607       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    608       1.1     itohy 	    NJATA32_REG_TIMING, sc->sc_timing_pio);
    609       1.1     itohy 
    610       1.1     itohy 	/*
    611       1.1     itohy 	 * reenable device interrupt in case it was disabled for
    612       1.1     itohy 	 * this transfer
    613       1.1     itohy 	 */
    614       1.1     itohy 	bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    615       1.1     itohy 	    NJATA32_REG_IRQ_SELECT, NJATA32_IRQ_XFER | NJATA32_IRQ_DEV);
    616       1.1     itohy 
    617       1.1     itohy #if 1	/* should be? */
    618       1.1     itohy 	if ((sc->sc_devflags & NJATA32_DEV_GOT_XFER_INTR) == 0)
    619       1.1     itohy 		error |= WDC_DMAST_ERR;
    620       1.1     itohy #endif
    621       1.1     itohy 	sc->sc_devflags = 0;
    622       1.1     itohy 
    623       1.1     itohy #ifdef DIAGNOSTIC
    624       1.6     itohy 	dev->d_flags &= ~NJATA32_DEV_DMA_STARTED;
    625       1.1     itohy #endif
    626       1.1     itohy 
    627       1.1     itohy 	return error;
    628       1.1     itohy }
    629       1.1     itohy 
    630       1.1     itohy /*
    631       1.1     itohy  * unmap DMA buffer
    632       1.1     itohy  */
    633       1.1     itohy void
    634       1.5  christos njata32_piobm_done(void *v, int channel, int drive)
    635       1.1     itohy {
    636       1.1     itohy 	struct njata32_softc *sc = v;
    637       1.1     itohy 	struct njata32_device *dev = &sc->sc_dev[drive];
    638       1.1     itohy 
    639       1.1     itohy 	DPRINTF(("%s: njata32_piobm_done: ch%d dv%d\n",
    640       1.1     itohy 	    NJATA32NAME(sc), channel, drive));
    641       1.1     itohy 
    642       1.1     itohy 	KASSERT(channel == 0);
    643       1.1     itohy 	KASSERT(dev->d_flags & NJATA32_DEV_DMA_MAPPED);
    644       1.1     itohy 	KASSERT((dev->d_flags & NJATA32_DEV_DMA_STARTED) == 0);
    645       1.1     itohy 
    646       1.1     itohy 	/* unload dma map */
    647       1.1     itohy 	bus_dmamap_sync(sc->sc_dmat, dev->d_dmamap_xfer,
    648       1.1     itohy 	    0, dev->d_dmamap_xfer->dm_mapsize,
    649       1.1     itohy 	    (dev->d_flags & NJATA32_DEV_DMA_READ) ?
    650       1.1     itohy 		BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
    651       1.1     itohy 
    652       1.1     itohy 	bus_dmamap_unload(sc->sc_dmat, dev->d_dmamap_xfer);
    653       1.1     itohy 	dev->d_flags &= ~NJATA32_DEV_DMA_MAPPED;
    654       1.1     itohy }
    655       1.1     itohy 
    656       1.1     itohy int
    657      1.11       dsl njata32_intr(void *arg)
    658       1.1     itohy {
    659       1.1     itohy 	struct njata32_softc *sc = arg;
    660       1.1     itohy 	struct ata_channel *chp;
    661       1.1     itohy 	int irq;
    662       1.1     itohy 
    663       1.1     itohy 	irq = bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    664       1.1     itohy 	    NJATA32_REG_IRQ_STAT);
    665       1.1     itohy 	if ((irq & (NJATA32_IRQ_XFER | NJATA32_IRQ_DEV)) == 0)
    666       1.1     itohy 		return 0;	/* not mine */
    667       1.1     itohy 
    668       1.1     itohy 	DPRINTF(("%s: njata32_intr: irq = %#x, altstatus = %#x\n",
    669       1.1     itohy 	    NJATA32NAME(sc), irq,
    670       1.1     itohy 	    bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    671       1.1     itohy 		NJATA32_REG_WD_ALTSTATUS)));
    672       1.1     itohy 
    673       1.1     itohy 	chp = &sc->sc_ch[0].ch_ata_channel;
    674       1.1     itohy 
    675       1.1     itohy 	if (irq & NJATA32_IRQ_XFER)
    676       1.1     itohy 		sc->sc_devflags |= NJATA32_DEV_GOT_XFER_INTR;
    677       1.1     itohy 
    678       1.1     itohy 	if ((irq & (NJATA32_IRQ_XFER | NJATA32_IRQ_DEV)) == NJATA32_IRQ_XFER &&
    679       1.1     itohy 	    (sc->sc_devflags & NJATA32_DEV_XFER_INTR) == 0) {
    680       1.1     itohy 		/*
    681       1.1     itohy 		 * transfer done, wait for device interrupt
    682       1.1     itohy 		 */
    683       1.1     itohy 		bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
    684       1.2     itohy 		    NJATA32_REG_BM, NJATA32_BM_WAIT0);
    685       1.1     itohy 		return 1;
    686       1.1     itohy 	}
    687       1.1     itohy 
    688       1.1     itohy 	/*
    689       1.1     itohy 	 * If both transfer done interrupt and device interrupt are
    690       1.1     itohy 	 * active for ATAPI transfer, call wdcintr() twice.
    691       1.1     itohy 	 */
    692       1.1     itohy 	if ((sc->sc_devflags & NJATA32_DEV_DMA_ATAPI) &&
    693       1.1     itohy 	    (irq & (NJATA32_IRQ_XFER | NJATA32_IRQ_DEV)) ==
    694       1.1     itohy 		(NJATA32_IRQ_XFER | NJATA32_IRQ_DEV) &&
    695       1.1     itohy 	    (sc->sc_devflags & NJATA32_DEV_XFER_INTR)) {
    696       1.1     itohy 		if (wdcintr(chp) == 0) {
    697       1.1     itohy 			njata32_clearirq(&sc->sc_ch[0].ch_ata_channel, irq);
    698       1.1     itohy 		}
    699       1.1     itohy 	}
    700       1.1     itohy 
    701       1.1     itohy 	if (wdcintr(chp) == 0) {
    702       1.1     itohy 		njata32_clearirq(&sc->sc_ch[0].ch_ata_channel, irq);
    703       1.1     itohy 	}
    704       1.1     itohy 
    705       1.1     itohy 	return 1;
    706       1.1     itohy }
    707