opl3sa3reg.h revision 1.3
1 /* $NetBSD: opl3sa3reg.h,v 1.3 2005/02/27 00:27:02 perry Exp $ */ 2 3 /*- 4 * Copyright (c) 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by ITOH Yasufumi. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 /* 40 * YAMAHA YMF711 (OPL3 Single-chip Audio System 2; OPL3-SA2) 41 * YAMAHA YMF715x (OPL3 Single-chip Audio System 3; OPL3-SA3) 42 * control register description 43 * 44 * Other ports (SBpro, WSS CODEC, MPU401, OPL3, etc.) are NOT listed here. 45 */ 46 47 /* [2]: OPL3-SA2 only, [3]: OPL3-SA3 only */ 48 49 /* 50 * direct registers 51 */ 52 53 /* offset from the base address */ 54 #define SA3_CTL_INDEX 0 /* Index port (R/W) */ 55 #define SA3_CTL_DATA 1 /* Data register port (R/W) */ 56 57 #define SA3_CTL_NPORT 2 /* number of ports */ 58 59 /* 60 * indirect registers 61 */ 62 63 #define SA3_PWR_MNG 0x01 /* Power management (R/W) */ 64 #define SA2_PWR_MNG_SRST 0x80 /* [2] Software reset */ 65 #define SA3_PWR_MNG_ADOWN 0x20 /* [3] Analog Down */ 66 #define SA2_PWR_MNG_CLKO 0x10 /* [2] Master Clock disable */ 67 #define SA2_PWR_MNG_FMPS 0x08 /* [2] OPL3 power down */ 68 #define SA3_PWR_MNG_PSV 0x04 /* Power save */ 69 #define SA3_PWR_MNG_PDN 0x02 /* Power down */ 70 #define SA3_PWR_MNG_PDX 0x01 /* Oscillation stop */ 71 #define SA3_PWR_MNG_DEFAULT 0x00 /* default value */ 72 73 #define SA3_SYS_CTL 0x02 /* System control (R/W) */ 74 #define SA3_SYS_CTL_SBHE 0x80 /* 0: AT-bus, 1: XT-bus */ 75 #define SA3_SYS_CTL_YMODE 0x30 /* [3] 3D Enhancement mode */ 76 #define SA3_SYS_CTL_YMODE0 0x00 /* Desktop mode (speaker 5-12cm) */ 77 #define SA3_SYS_CTL_YMODE1 0x10 /* Notebook PC mode (1) (3cm) */ 78 #define SA3_SYS_CTL_YMODE2 0x20 /* Notebook PC mode (2) (1.5cm) */ 79 #define SA3_SYS_CTL_YMODE3 0x30 /* Hi-Fi mode (16-38cm) */ 80 #define SA3_SYS_CTL_IDSEL 0x06 /* Specify DSP version of SBPro */ 81 #define SA3_SYS_CTL_IDSEL0 0x00 /* major 0x03, minor 0x01 */ 82 #define SA3_SYS_CTL_IDSEL1 0x02 /* major 0x02, minor 0x01 */ 83 #define SA3_SYS_CTL_IDSEL2 0x04 /* major 0x01, minor 0x05 */ 84 #define SA3_SYS_CTL_IDSEL3 0x06 /* major 0x00, minor 0x00 */ 85 #define SA3_SYS_CTL_VZE 0x01 /* ZV */ 86 #define SA3_SYS_CTL_DEFAULT 0x00 /* default value */ 87 88 #define SA3_IRQ_CONF 0x03 /* Interrupt Channel config (R/W) */ 89 #define SA3_IRQ_CONF_OPL3_B 0x80 /* OPL3 uses IRQ-B */ 90 #define SA3_IRQ_CONF_MPU_B 0x40 /* MPU401 uses IRQ-B */ 91 #define SA3_IRQ_CONF_SB_B 0x20 /* Sound Blaster uses IRQ-B */ 92 #define SA3_IRQ_CONF_WSS_B 0x10 /* WSS CODEC uses IRQ-B */ 93 #define SA3_IRQ_CONF_OPL3_A 0x08 /* OPL3 uses IRQ-A */ 94 #define SA3_IRQ_CONF_MPU_A 0x04 /* MPU401 uses IRQ-A */ 95 #define SA3_IRQ_CONF_SB_A 0x02 /* Sound Blaster uses IRQ-A */ 96 #define SA3_IRQ_CONF_WSS_A 0x01 /* WSS CODEC uses IRQ-A */ 97 #define SA3_IRQ_CONF_DEFAULT (SA3_IRQ_CONF_MPU_B | SA3_IRQ_CONF_SB_B | \ 98 SA3_IRQ_CONF_OPL3_A | SA3_IRQ_CONF_WSS_A) 99 100 #define SA3_IRQA_STAT 0x04 /* Interrupt (IRQ-A) STATUS (RO) */ 101 #define SA3_IRQB_STAT 0x05 /* Interrupt (IRQ-B) STATUS (RO) */ 102 #define SA3_IRQ_STAT_MV 0x40 /* [3] Hardware Volume Interrupt */ 103 #define SA3_IRQ_STAT_OPL3 0x20 /* Internal FM-synthesizer timer */ 104 #define SA3_IRQ_STAT_MPU 0x10 /* MPU401 Interrupt */ 105 #define SA3_IRQ_STAT_SB 0x08 /* Sound Blaster Playback Interrupt */ 106 #define SA3_IRQ_STAT_TI 0x04 /* Timer Flag of CODEC */ 107 #define SA3_IRQ_STAT_CI 0x02 /* Recording Flag of CODEC */ 108 #define SA3_IRQ_STAT_PI 0x01 /* Playback Flag of CODEC */ 109 110 #define SA3_DMA_CONF 0x06 /* DMA configuration (R/W) */ 111 #define SA3_DMA_CONF_SB_B 0x40 /* Sound Blaster playback uses DMA-B */ 112 #define SA3_DMA_CONF_WSS_R_B 0x20 /* WSS CODEC recording uses DMA-B */ 113 #define SA3_DMA_CONF_WSS_P_B 0x10 /* WSS CODEC playback uses DMA-B */ 114 #define SA3_DMA_CONF_SB_A 0x04 /* Sound Blaster playback uses DMA-A */ 115 #define SA3_DMA_CONF_WSS_R_A 0x02 /* WSS CODEC recording uses DMA-A */ 116 #define SA3_DMA_CONF_WSS_P_A 0x01 /* WSS CODEC playback uses DMA-A */ 117 #define SA3_DMA_CONF_DEFAULT (SA3_DMA_CONF_SB_B | SA3_DMA_CONF_WSS_R_B | \ 118 SA3_DMA_CONF_WSS_P_A) 119 120 #define SA3_VOL_L 0x07 /* Master Volume Lch (R/W) */ 121 #define SA3_VOL_R 0x08 /* Master Volume Rch (R/W) */ 122 #define SA3_VOL_MUTE 0x80 /* Mute the channel */ 123 #define SA3_VOL_MV 0x0f /* Master Volume bits */ 124 #define SA3_VOL_MV_0 0x00 /* 0dB (maximum volume) */ 125 #define SA3_VOL_MV_2 0x01 /* -2dB */ 126 #define SA3_VOL_MV_4 0x02 /* -4dB */ 127 #define SA3_VOL_MV_6 0x03 /* -6dB */ 128 #define SA3_VOL_MV_8 0x04 /* -8dB */ 129 #define SA3_VOL_MV_10 0x05 /* -10dB */ 130 #define SA3_VOL_MV_12 0x06 /* -12dB */ 131 #define SA3_VOL_MV_14 0x07 /* -14dB (default) */ 132 #define SA3_VOL_MV_16 0x08 /* -16dB */ 133 #define SA3_VOL_MV_18 0x09 /* -18dB */ 134 #define SA3_VOL_MV_20 0x0a /* -20dB */ 135 #define SA3_VOL_MV_22 0x0b /* -22dB */ 136 #define SA3_VOL_MV_24 0x0c /* -24dB */ 137 #define SA3_VOL_MV_26 0x0d /* -26dB */ 138 #define SA3_VOL_MV_28 0x0e /* -28dB */ 139 #define SA3_VOL_MV_30 0x0f /* -30dB (minimum volume) */ 140 #define SA3_VOL_DEFAULT SA3_VOL_MV_14 141 142 #define SA3_MIC_VOL 0x09 /* MIC Volume (R/W) */ 143 #define SA3_MIC_MUTE 0x80 /* Mute Mic Volume */ 144 #define SA3_MIC_MCV 0x1f /* Mic volume bits */ 145 #define SA3_MIC_MCV12 0x00 /* +12.0dB (maximum volume) */ 146 #define SA3_MIC_MCV10_5 0x01 /* +10.5dB */ 147 #define SA3_MIC_MCV9 0x02 /* +9.0dB */ 148 #define SA3_MIC_MCV7_5 0x03 /* +7.5dB */ 149 #define SA3_MIC_MCV6 0x04 /* +6.0dB */ 150 #define SA3_MIC_MCV4_5 0x05 /* +4.5dB */ 151 #define SA3_MIC_MCV3 0x06 /* +3.0dB */ 152 #define SA3_MIC_MCV1_5 0x07 /* +1.5dB */ 153 #define SA3_MIC_MCV_0 0x08 /* 0.0dB (default) */ 154 #define SA3_MIC_MCV_1_5 0x09 /* -1.5dB */ 155 #define SA3_MIC_MCV_3_0 0x0a /* -3.0dB */ 156 #define SA3_MIC_MCV_4_5 0x0b /* -4.5dB */ 157 #define SA3_MIC_MCV_6 0x0c /* -6.0dB */ 158 #define SA3_MIC_MCV_7_5 0x0d /* -7.5dB */ 159 #define SA3_MIC_MCV_9 0x0e /* -9.0dB */ 160 #define SA3_MIC_MCV_10_5 0x0f /* -10.5dB */ 161 #define SA3_MIC_MCV_12 0x10 /* -12.0dB */ 162 #define SA3_MIC_MCV_13_5 0x11 /* -13.5dB */ 163 #define SA3_MIC_MCV_15 0x12 /* -15.0dB */ 164 #define SA3_MIC_MCV_16_5 0x13 /* -16.5dB */ 165 #define SA3_MIC_MCV_18 0x14 /* -18.0dB */ 166 #define SA3_MIC_MCV_19_5 0x15 /* -19.5dB */ 167 #define SA3_MIC_MCV_21 0x16 /* -21.0dB */ 168 #define SA3_MIC_MCV_22_5 0x17 /* -22.5dB */ 169 #define SA3_MIC_MCV_24 0x18 /* -24.0dB */ 170 #define SA3_MIC_MCV_25_5 0x19 /* -25.5dB */ 171 #define SA3_MIC_MCV_27 0x1a /* -27.0dB */ 172 #define SA3_MIC_MCV_28_5 0x1b /* -28.5dB */ 173 #define SA3_MIC_MCV_30 0x1c /* -30.0dB */ 174 #define SA3_MIC_MCV_31_5 0x1d /* -31.5dB */ 175 #define SA3_MIC_MCV_33 0x1e /* -33.0dB */ 176 #define SA3_MIC_MCV_34_5 0x1f /* -34.5dB (minimum volume) */ 177 #define SA3_MIC_VOL_DEFAULT (SA3_MIC_MUTE | SA3_MIC_MCV_0) 178 179 #define SA3_MISC 0x0a /* Miscellaneous */ 180 #define SA3_MISC_VEN 0x80 /* Enable hardware volume control */ 181 #define SA3_MISC_MCSW 0x10 /* A/D is connected to 0: Rch of Mic, 182 1: loopback of monaural output */ 183 #define SA3_MISC_MODE 0x08 /* 0: SB mode, 1: WSS mode (RO) */ 184 #define SA3_MISC_VER 0x07 /* Version of OPL3-SA2/OPL3-SA3 (RO) */ 185 #define SA3_MISC_VER_711 1 /* OPL3-SA2 (YMF711) */ 186 #define SA3_MISC_VER_715 2 /* OPL3-SA3 (YMF715) */ 187 #define SA3_MISC_VER_715B 3 /* OPL3-SA3 (YMF715B) */ 188 #define SA3_MISC_VER_715E 4 /* OPL3-SA3 (YMF715E) */ 189 /* (4 or 5?) */ 190 /*#define SA3_MISC_DEFAULT (SA3_MISC_VEN | version) */ 191 192 /* WSS DMA Base counters (R/W) used for suspend/resume */ 193 #define SA3_DMA_CNT_PLAY_LOW 0x0b /* Playback Base Counter (Low) */ 194 #define SA3_DMA_CNT_PLAY_HIGH 0x0c /* Playback Base Counter (High) */ 195 #define SA3_DMA_CNT_REC_LOW 0x0d /* Recording Base Counter (Low) */ 196 #define SA3_DMA_CNT_REC_HIGH 0x0e /* Recording Base Counter (High) */ 197 198 /* [3] */ 199 #define SA3_WSS_INT_SCAN 0x0f /* WSS Interrupt Scan out/in (R/W)*/ 200 #define SA3_WSS_INT_SCAN_STI 0x04 /* 1: TI = "1" and IRQ active */ 201 #define SA3_WSS_INT_SCAN_SCI 0x02 /* 1: CI = "1" and IRQ active */ 202 #define SA3_WSS_INT_SCAN_SPI 0x01 /* 1: PI = "1" and IRQ active */ 203 #define SA3_WSS_INT_DEFAULT 0x00 /* default value */ 204 205 /* [3] */ 206 #define SA3_SB_SCAN 0x10 /* SB Internal State Scan out/in (R/W)*/ 207 #define SA3_SB_SCAN_SBPDA 0x80 /* Sound Blaster Power Down ack */ 208 #define SA3_SB_SCAN_SS 0x08 /* Scan Select */ 209 #define SA3_SB_SCAN_SM 0x04 /* Scan Mode 1: read out, 0: write in */ 210 #define SA3_SB_SCAN_SE 0x02 /* Scan Enable */ 211 #define SA3_SB_SCAN_SBPDR 0x01 /* Sound Blaster Power Down Request */ 212 #define SA3_SB_SCAN_DEFAULT 0x00 /* default value */ 213 214 /* [3] */ 215 #define SA3_SB_SCAN_DATA 0x11 /* SB Internal State Scan Data (R/W)*/ 216 217 /* [3] */ 218 #define SA3_DPWRDWN 0x12 /* Digital Partial Power Down (R/W) */ 219 #define SA3_DPWRDWN_JOY 0x80 /* Joystick power down */ 220 #define SA3_DPWRDWN_MPU 0x40 /* MPU401 power down */ 221 #define SA3_DPWRDWN_MCLKO 0x20 /* Master Clock disable */ 222 #define SA3_DPWRDWN_FM 0x10 /* FM (OPL3) power down */ 223 #define SA3_DPWRDWN_WSS_R 0x08 /* WSS recording power down */ 224 #define SA3_DPWRDWN_WSS_P 0x04 /* WSS playback power down */ 225 #define SA3_DPWRDWN_SB 0x02 /* Sound Blaster power down */ 226 #define SA3_DPWRDWN_PNP 0x01 /* PnP power down */ 227 #define SA3_DPWRDWN_DEFAULT 0x00 /* default value */ 228 229 /* [3] */ 230 #define SA3_APWRDWN 0x13 /* Analog Partial Power Down (R/W) */ 231 #define SA3_APWRDWN_FMDAC 0x10 /* FMDAC for OPL3 power down */ 232 #define SA3_APWRDWN_AD 0x08 /* A/D for WSS recording power down */ 233 #define SA3_APWRDWN_DA 0x04 /* D/A for WSS playback power down */ 234 #define SA3_APWRDWN_SBDAC 0x02 /* D/A for SB power down */ 235 #define SA3_APWRDWN_WIDE 0x01 /* Wide Stereo power down */ 236 #define SA3_APWRDWN_DEFAULT 0x00 /* default value */ 237 238 /* [3] */ 239 #define SA3_3D_WIDE 0x14 /* 3D Enhanced control (WIDE) (R/W) */ 240 #define SA3_3D_WIDE_WIDER 0x70 /* Rch of wide 3D enhanced control */ 241 #define SA3_3D_WIDE_WIDEL 0x07 /* Lch of wide 3D enhanced control */ 242 #define SA3_3D_WIDE_DEFAULT 0x00 /* default value */ 243 244 /* [3] */ 245 #define SA3_3D_BASS 0x15 /* 3D Enhanced control (BASS) (R/W) */ 246 #define SA3_3D_BASS_BASSR 0x70 /* Rch of bass 3D enhanced control */ 247 #define SA3_3D_BASS_BASSL 0x07 /* Lch of bass 3D enhanced control */ 248 #define SA3_3D_BASS_DEFAULT 0x00 /* default value */ 249 250 /* [3] */ 251 #define SA3_3D_TREBLE 0x16 /* 3D Enhanced control (TREBLE) (R/W) */ 252 #define SA3_3D_TREBLE_TRER 0x70 /* Rch of treble 3D enhanced control */ 253 #define SA3_3D_TREBLE_TREL 0x07 /* Lch of treble 3D enhanced control */ 254 #define SA3_3D_TREBLE_DEFAULT 0x00 /* default value */ 255 256 /* common to the 3D enhance registers */ 257 #define SA3_3D_BITS 0x07 258 #define SA3_3D_LSHIFT 0 259 #define SA3_3D_RSHIFT 4 260 261 /* [3] */ 262 #define SA3_HVOL_INTR_CNF 0x17 /* Hardware Volume Intr Channel (R/W) */ 263 #define SA3_HVOL_INTR_CNF_B 0x20 /* Hardware Volume uses IRQ-B */ 264 #define SA3_HVOL_INTR_CNF_A 0x10 /* Hardware Volume uses IRQ-A */ 265 #define SA3_HVOL_INTR_CNF_DEFAULT 0x00 266 267 /* [3] */ 268 #define SA3_MULTI_STAT 0x18 /* Multi-purpose Select Pin Stat (RO) */ 269 #define SA3_MULTI_STAT_SEL 0x70 /* State of SEL2-0 pins */ 270
Indexes created Mon Sep 29 21:09:56 GMT 2025