Home | History | Annotate | Line # | Download | only in ic
siop_common.c revision 1.56
      1  1.56    andvar /*	$NetBSD: siop_common.c,v 1.56 2022/05/22 11:27:35 andvar Exp $	*/
      2   1.1    bouyer 
      3   1.1    bouyer /*
      4  1.22    bouyer  * Copyright (c) 2000, 2002 Manuel Bouyer.
      5   1.1    bouyer  *
      6   1.1    bouyer  * Redistribution and use in source and binary forms, with or without
      7   1.1    bouyer  * modification, are permitted provided that the following conditions
      8   1.1    bouyer  * are met:
      9   1.1    bouyer  * 1. Redistributions of source code must retain the above copyright
     10   1.1    bouyer  *    notice, this list of conditions and the following disclaimer.
     11   1.1    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12   1.1    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13   1.1    bouyer  *    documentation and/or other materials provided with the distribution.
     14   1.1    bouyer  *
     15   1.1    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16   1.1    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17   1.1    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18  1.37     perry  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19   1.1    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20   1.1    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21   1.1    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22   1.1    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23   1.1    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24   1.1    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25   1.1    bouyer  *
     26   1.1    bouyer  */
     27   1.1    bouyer 
     28   1.1    bouyer /* SYM53c7/8xx PCI-SCSI I/O Processors driver */
     29  1.15     lukem 
     30  1.15     lukem #include <sys/cdefs.h>
     31  1.56    andvar __KERNEL_RCSID(0, "$NetBSD: siop_common.c,v 1.56 2022/05/22 11:27:35 andvar Exp $");
     32   1.1    bouyer 
     33   1.1    bouyer #include <sys/param.h>
     34   1.1    bouyer #include <sys/systm.h>
     35   1.1    bouyer #include <sys/device.h>
     36   1.1    bouyer #include <sys/malloc.h>
     37   1.1    bouyer #include <sys/buf.h>
     38   1.1    bouyer #include <sys/kernel.h>
     39   1.1    bouyer #include <sys/scsiio.h>
     40   1.1    bouyer 
     41   1.1    bouyer #include <machine/endian.h>
     42  1.43        ad #include <sys/bus.h>
     43   1.1    bouyer 
     44   1.1    bouyer #include <dev/scsipi/scsi_all.h>
     45   1.1    bouyer #include <dev/scsipi/scsi_message.h>
     46   1.1    bouyer #include <dev/scsipi/scsipi_all.h>
     47   1.1    bouyer 
     48   1.1    bouyer #include <dev/scsipi/scsiconf.h>
     49   1.1    bouyer 
     50   1.1    bouyer #include <dev/ic/siopreg.h>
     51   1.1    bouyer #include <dev/ic/siopvar_common.h>
     52   1.1    bouyer 
     53  1.16    bouyer #include "opt_siop.h"
     54  1.16    bouyer 
     55   1.2    bouyer #undef DEBUG
     56   1.2    bouyer #undef DEBUG_DR
     57  1.22    bouyer #undef DEBUG_NEG
     58  1.22    bouyer 
     59  1.22    bouyer int
     60  1.47       dsl siop_common_attach(struct siop_common_softc *sc)
     61  1.22    bouyer {
     62  1.22    bouyer 	int error, i;
     63  1.22    bouyer 	bus_dma_segment_t seg;
     64  1.22    bouyer 	int rseg;
     65  1.22    bouyer 
     66  1.22    bouyer 	/*
     67  1.22    bouyer 	 * Allocate DMA-safe memory for the script and map it.
     68  1.22    bouyer 	 */
     69  1.22    bouyer 	if ((sc->features & SF_CHIP_RAM) == 0) {
     70  1.37     perry 		error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE,
     71  1.22    bouyer 		    PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT);
     72  1.22    bouyer 		if (error) {
     73  1.51   tsutsui 			aprint_error_dev(sc->sc_dev,
     74  1.45    cegger 			    "unable to allocate script DMA memory, "
     75  1.45    cegger 			    "error = %d\n", error);
     76  1.22    bouyer 			return error;
     77  1.22    bouyer 		}
     78  1.22    bouyer 		error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE,
     79  1.42  christos 		    (void **)&sc->sc_script,
     80  1.22    bouyer 		    BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
     81  1.22    bouyer 		if (error) {
     82  1.50   tsutsui 			aprint_error_dev(sc->sc_dev,
     83  1.50   tsutsui 			    "unable to map script DMA memory, "
     84  1.45    cegger 			    "error = %d\n", error);
     85  1.22    bouyer 			return error;
     86  1.22    bouyer 		}
     87  1.22    bouyer 		error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1,
     88  1.22    bouyer 		    PAGE_SIZE, 0, BUS_DMA_NOWAIT, &sc->sc_scriptdma);
     89  1.22    bouyer 		if (error) {
     90  1.50   tsutsui 			aprint_error_dev(sc->sc_dev,
     91  1.50   tsutsui 			    "unable to create script DMA map, "
     92  1.45    cegger 			    "error = %d\n", error);
     93  1.22    bouyer 			return error;
     94  1.22    bouyer 		}
     95  1.22    bouyer 		error = bus_dmamap_load(sc->sc_dmat, sc->sc_scriptdma,
     96  1.22    bouyer 		    sc->sc_script, PAGE_SIZE, NULL, BUS_DMA_NOWAIT);
     97  1.22    bouyer 		if (error) {
     98  1.50   tsutsui 			aprint_error_dev(sc->sc_dev,
     99  1.50   tsutsui 			    "unable to load script DMA map, "
    100  1.45    cegger 			    "error = %d\n", error);
    101  1.22    bouyer 			return error;
    102  1.22    bouyer 		}
    103  1.22    bouyer 		sc->sc_scriptaddr =
    104  1.22    bouyer 		    sc->sc_scriptdma->dm_segs[0].ds_addr;
    105  1.22    bouyer 		sc->ram_size = PAGE_SIZE;
    106  1.22    bouyer 	}
    107  1.22    bouyer 
    108  1.49   tsutsui 	sc->sc_adapt.adapt_dev = sc->sc_dev;
    109  1.22    bouyer 	sc->sc_adapt.adapt_nchannels = 1;
    110  1.22    bouyer 	sc->sc_adapt.adapt_openings = 0;
    111  1.22    bouyer 	sc->sc_adapt.adapt_ioctl = siop_ioctl;
    112  1.22    bouyer 	sc->sc_adapt.adapt_minphys = minphys;
    113  1.22    bouyer 
    114  1.22    bouyer 	memset(&sc->sc_chan, 0, sizeof(sc->sc_chan));
    115  1.22    bouyer 	sc->sc_chan.chan_adapter = &sc->sc_adapt;
    116  1.22    bouyer 	sc->sc_chan.chan_bustype = &scsi_bustype;
    117  1.22    bouyer 	sc->sc_chan.chan_channel = 0;
    118  1.22    bouyer 	sc->sc_chan.chan_flags = SCSIPI_CHAN_CANGROW;
    119  1.22    bouyer 	sc->sc_chan.chan_ntargets =
    120  1.22    bouyer 	    (sc->features & SF_BUS_WIDE) ? 16 : 8;
    121  1.22    bouyer 	sc->sc_chan.chan_nluns = 8;
    122  1.22    bouyer 	sc->sc_chan.chan_id =
    123  1.22    bouyer 	    bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCID);
    124  1.22    bouyer 	if (sc->sc_chan.chan_id == 0 ||
    125  1.22    bouyer 	    sc->sc_chan.chan_id >= sc->sc_chan.chan_ntargets)
    126  1.22    bouyer 		sc->sc_chan.chan_id = SIOP_DEFAULT_TARGET;
    127  1.22    bouyer 
    128  1.22    bouyer 	for (i = 0; i < 16; i++)
    129  1.22    bouyer 		sc->targets[i] = NULL;
    130  1.22    bouyer 
    131  1.22    bouyer 	/* find min/max sync period for this chip */
    132  1.22    bouyer 	sc->st_maxsync = 0;
    133  1.22    bouyer 	sc->dt_maxsync = 0;
    134  1.22    bouyer 	sc->st_minsync = 255;
    135  1.22    bouyer 	sc->dt_minsync = 255;
    136  1.50   tsutsui 	for (i = 0; i < __arraycount(scf_period); i++) {
    137  1.22    bouyer 		if (sc->clock_period != scf_period[i].clock)
    138  1.22    bouyer 			continue;
    139  1.22    bouyer 		if (sc->st_maxsync < scf_period[i].period)
    140  1.22    bouyer 			sc->st_maxsync = scf_period[i].period;
    141  1.22    bouyer 		if (sc->st_minsync > scf_period[i].period)
    142  1.22    bouyer 			sc->st_minsync = scf_period[i].period;
    143  1.22    bouyer 	}
    144  1.22    bouyer 	if (sc->st_maxsync == 255 || sc->st_minsync == 0)
    145  1.31    provos 		panic("siop: can't find my sync parameters");
    146  1.50   tsutsui 	for (i = 0; i < __arraycount(dt_scf_period); i++) {
    147  1.22    bouyer 		if (sc->clock_period != dt_scf_period[i].clock)
    148  1.22    bouyer 			continue;
    149  1.22    bouyer 		if (sc->dt_maxsync < dt_scf_period[i].period)
    150  1.22    bouyer 			sc->dt_maxsync = dt_scf_period[i].period;
    151  1.22    bouyer 		if (sc->dt_minsync > dt_scf_period[i].period)
    152  1.22    bouyer 			sc->dt_minsync = dt_scf_period[i].period;
    153  1.22    bouyer 	}
    154  1.22    bouyer 	if (sc->dt_maxsync == 255 || sc->dt_minsync == 0)
    155  1.31    provos 		panic("siop: can't find my sync parameters");
    156  1.22    bouyer 	return 0;
    157  1.22    bouyer }
    158   1.1    bouyer 
    159   1.1    bouyer void
    160  1.47       dsl siop_common_reset(struct siop_common_softc *sc)
    161   1.1    bouyer {
    162  1.46  kiyohara 	u_int32_t stest1, stest3;
    163   1.1    bouyer 
    164   1.1    bouyer 	/* reset the chip */
    165   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_SRST);
    166   1.1    bouyer 	delay(1000);
    167   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, 0);
    168   1.1    bouyer 
    169   1.1    bouyer 	/* init registers */
    170   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL0,
    171   1.1    bouyer 	    SCNTL0_ARB_MASK | SCNTL0_EPC | SCNTL0_AAP);
    172   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, 0);
    173   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, sc->clock_div);
    174   1.7    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER, 0);
    175   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DIEN, 0xff);
    176   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN0,
    177   1.1    bouyer 	    0xff & ~(SIEN0_CMP | SIEN0_SEL | SIEN0_RSL));
    178   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN1,
    179   1.1    bouyer 	    0xff & ~(SIEN1_HTH | SIEN1_GEN));
    180   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, 0);
    181   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, STEST3_TE);
    182   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STIME0,
    183   1.1    bouyer 	    (0xb << STIME0_SEL_SHIFT));
    184   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCID,
    185  1.14    bouyer 	    sc->sc_chan.chan_id | SCID_RRE);
    186   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_RESPID0,
    187  1.14    bouyer 	    1 << sc->sc_chan.chan_id);
    188   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DCNTL,
    189   1.1    bouyer 	    (sc->features & SF_CHIP_PF) ? DCNTL_COM | DCNTL_PFEN : DCNTL_COM);
    190  1.33    bouyer 	if (sc->features & SF_CHIP_AAIP)
    191  1.33    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh,
    192  1.33    bouyer 		    SIOP_AIPCNTL1, AIPCNTL1_DIS);
    193   1.1    bouyer 
    194   1.1    bouyer 	/* enable clock doubler or quadruler if appropriate */
    195   1.1    bouyer 	if (sc->features & (SF_CHIP_DBLR | SF_CHIP_QUAD)) {
    196   1.1    bouyer 		stest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3);
    197   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1,
    198   1.1    bouyer 		    STEST1_DBLEN);
    199   1.1    bouyer 		if (sc->features & SF_CHIP_QUAD) {
    200   1.1    bouyer 			/* wait for PPL to lock */
    201   1.1    bouyer 			while ((bus_space_read_1(sc->sc_rt, sc->sc_rh,
    202   1.1    bouyer 			    SIOP_STEST4) & STEST4_LOCK) == 0)
    203   1.1    bouyer 				delay(10);
    204   1.1    bouyer 		} else {
    205   1.1    bouyer 			/* data sheet says 20us - more won't hurt */
    206   1.1    bouyer 			delay(100);
    207   1.1    bouyer 		}
    208   1.1    bouyer 		/* halt scsi clock, select doubler/quad, restart clock */
    209   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3,
    210   1.1    bouyer 		    stest3 | STEST3_HSC);
    211   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1,
    212   1.1    bouyer 		    STEST1_DBLEN | STEST1_DBLSEL);
    213   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, stest3);
    214   1.1    bouyer 	} else {
    215   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, 0);
    216   1.1    bouyer 	}
    217  1.46  kiyohara 
    218  1.46  kiyohara 	if (sc->features & SF_CHIP_USEPCIC) {
    219  1.46  kiyohara 		stest1 = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_STEST1);
    220  1.46  kiyohara 		stest1 |= STEST1_SCLK;
    221  1.46  kiyohara 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, stest1);
    222  1.46  kiyohara 	}
    223  1.46  kiyohara 
    224   1.1    bouyer 	if (sc->features & SF_CHIP_FIFO)
    225   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5,
    226   1.1    bouyer 		    bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5) |
    227   1.1    bouyer 		    CTEST5_DFS);
    228  1.21    bouyer 	if (sc->features & SF_CHIP_LED0) {
    229  1.21    bouyer 		/* Set GPIO0 as output if software LED control is required */
    230  1.21    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_GPCNTL,
    231  1.21    bouyer 		    bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_GPCNTL) & 0xfe);
    232  1.21    bouyer 	}
    233  1.22    bouyer 	if (sc->features & SF_BUS_ULTRA3) {
    234  1.22    bouyer 		/* reset SCNTL4 */
    235  1.22    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL4, 0);
    236  1.22    bouyer 	}
    237  1.27    bouyer 	sc->mode = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST4) &
    238  1.27    bouyer 	    STEST4_MODE_MASK;
    239  1.30    bouyer 
    240  1.30    bouyer 	/*
    241  1.30    bouyer 	 * initialise the RAM. Without this we may get scsi gross errors on
    242  1.30    bouyer 	 * the 1010
    243  1.30    bouyer 	 */
    244  1.30    bouyer 	if (sc->features & SF_CHIP_RAM)
    245  1.30    bouyer 		bus_space_set_region_4(sc->sc_ramt, sc->sc_ramh,
    246  1.30    bouyer 			0, 0, sc->ram_size / 4);
    247   1.1    bouyer 	sc->sc_reset(sc);
    248   1.1    bouyer }
    249   1.1    bouyer 
    250  1.10    bouyer /* prepare tables before sending a cmd */
    251  1.10    bouyer void
    252  1.47       dsl siop_setuptables(struct siop_common_cmd *siop_cmd)
    253  1.10    bouyer {
    254  1.10    bouyer 	int i;
    255  1.17    bouyer 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    256  1.10    bouyer 	struct scsipi_xfer *xs = siop_cmd->xs;
    257  1.14    bouyer 	int target = xs->xs_periph->periph_target;
    258  1.14    bouyer 	int lun = xs->xs_periph->periph_lun;
    259  1.14    bouyer 	int msgoffset = 1;
    260  1.10    bouyer 
    261  1.44     skrll 	siop_cmd->siop_tables->id = siop_htoc32(sc, sc->targets[target]->id);
    262  1.22    bouyer 	memset(siop_cmd->siop_tables->msg_out, 0,
    263  1.22    bouyer 	    sizeof(siop_cmd->siop_tables->msg_out));
    264  1.14    bouyer 	/* request sense doesn't disconnect */
    265  1.14    bouyer 	if (xs->xs_control & XS_CTL_REQSENSE)
    266  1.17    bouyer 		siop_cmd->siop_tables->msg_out[0] = MSG_IDENTIFY(lun, 0);
    267  1.26    bouyer 	else if ((sc->features & SF_CHIP_GEBUG) &&
    268  1.26    bouyer 	    (sc->targets[target]->flags & TARF_ISWIDE) == 0)
    269  1.26    bouyer 		/*
    270  1.26    bouyer 		 * 1010 bug: it seems that the 1010 has problems with reselect
    271  1.26    bouyer 		 * when not in wide mode (generate false SCSI gross error).
    272  1.26    bouyer 		 * The FreeBSD sym driver has comments about it but their
    273  1.26    bouyer 		 * workaround (disable SCSI gross error reporting) doesn't
    274  1.26    bouyer 		 * work with my adapter. So disable disconnect when not
    275  1.26    bouyer 		 * wide.
    276  1.26    bouyer 		 */
    277  1.26    bouyer 		siop_cmd->siop_tables->msg_out[0] = MSG_IDENTIFY(lun, 0);
    278  1.14    bouyer 	else
    279  1.17    bouyer 		siop_cmd->siop_tables->msg_out[0] = MSG_IDENTIFY(lun, 1);
    280  1.14    bouyer 	if (xs->xs_tag_type != 0) {
    281  1.14    bouyer 		if ((sc->targets[target]->flags & TARF_TAG) == 0) {
    282  1.14    bouyer 			scsipi_printaddr(xs->xs_periph);
    283  1.14    bouyer 			printf(": tagged command type %d id %d\n",
    284  1.14    bouyer 			    siop_cmd->xs->xs_tag_type, siop_cmd->xs->xs_tag_id);
    285  1.31    provos 			panic("tagged command for non-tagging device");
    286  1.14    bouyer 		}
    287  1.14    bouyer 		siop_cmd->flags |= CMDFL_TAG;
    288  1.17    bouyer 		siop_cmd->siop_tables->msg_out[1] = siop_cmd->xs->xs_tag_type;
    289  1.19    bouyer 		/*
    290  1.19    bouyer 		 * use siop_cmd->tag not xs->xs_tag_id, caller may want a
    291  1.19    bouyer 		 * different one
    292  1.19    bouyer 		 */
    293  1.19    bouyer 		siop_cmd->siop_tables->msg_out[2] = siop_cmd->tag;
    294  1.14    bouyer 		msgoffset = 3;
    295  1.20    bouyer 	}
    296  1.44     skrll 	siop_cmd->siop_tables->t_msgout.count = siop_htoc32(sc, msgoffset);
    297  1.10    bouyer 	if (sc->targets[target]->status == TARST_ASYNC) {
    298  1.27    bouyer 		if ((sc->targets[target]->flags & TARF_DT) &&
    299  1.50   tsutsui 		    (sc->mode == STEST4_MODE_LVD)) {
    300  1.22    bouyer 			sc->targets[target]->status = TARST_PPR_NEG;
    301  1.50   tsutsui 			siop_ppr_msg(siop_cmd, msgoffset, sc->dt_minsync,
    302  1.22    bouyer 			    sc->maxoff);
    303  1.22    bouyer 		} else if (sc->targets[target]->flags & TARF_WIDE) {
    304  1.10    bouyer 			sc->targets[target]->status = TARST_WIDE_NEG;
    305  1.14    bouyer 			siop_wdtr_msg(siop_cmd, msgoffset,
    306  1.14    bouyer 			    MSG_EXT_WDTR_BUS_16_BIT);
    307  1.10    bouyer 		} else if (sc->targets[target]->flags & TARF_SYNC) {
    308  1.10    bouyer 			sc->targets[target]->status = TARST_SYNC_NEG;
    309  1.22    bouyer 			siop_sdtr_msg(siop_cmd, msgoffset, sc->st_minsync,
    310  1.22    bouyer 			(sc->maxoff > 31) ? 31 :  sc->maxoff);
    311  1.10    bouyer 		} else {
    312  1.10    bouyer 			sc->targets[target]->status = TARST_OK;
    313  1.14    bouyer 			siop_update_xfer_mode(sc, target);
    314  1.10    bouyer 		}
    315  1.10    bouyer 	}
    316  1.17    bouyer 	siop_cmd->siop_tables->status =
    317  1.44     skrll 	    siop_htoc32(sc, SCSI_SIOP_NOSTATUS); /* set invalid status */
    318  1.10    bouyer 
    319  1.17    bouyer 	siop_cmd->siop_tables->cmd.count =
    320  1.44     skrll 	    siop_htoc32(sc, siop_cmd->dmamap_cmd->dm_segs[0].ds_len);
    321  1.17    bouyer 	siop_cmd->siop_tables->cmd.addr =
    322  1.44     skrll 	    siop_htoc32(sc, siop_cmd->dmamap_cmd->dm_segs[0].ds_addr);
    323  1.14    bouyer 	if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
    324  1.10    bouyer 		for (i = 0; i < siop_cmd->dmamap_data->dm_nsegs; i++) {
    325  1.17    bouyer 			siop_cmd->siop_tables->data[i].count =
    326  1.44     skrll 			    siop_htoc32(sc,
    327  1.44     skrll 				siop_cmd->dmamap_data->dm_segs[i].ds_len);
    328  1.17    bouyer 			siop_cmd->siop_tables->data[i].addr =
    329  1.44     skrll 			    siop_htoc32(sc,
    330  1.44     skrll 				siop_cmd->dmamap_data->dm_segs[i].ds_addr);
    331  1.10    bouyer 		}
    332  1.10    bouyer 	}
    333  1.10    bouyer }
    334  1.10    bouyer 
    335   1.1    bouyer int
    336  1.47       dsl siop_wdtr_neg(struct siop_common_cmd *siop_cmd)
    337   1.1    bouyer {
    338  1.17    bouyer 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    339  1.17    bouyer 	struct siop_common_target *siop_target = siop_cmd->siop_target;
    340  1.14    bouyer 	int target = siop_cmd->xs->xs_periph->periph_target;
    341  1.17    bouyer 	struct siop_common_xfer *tables = siop_cmd->siop_tables;
    342   1.1    bouyer 
    343   1.1    bouyer 	if (siop_target->status == TARST_WIDE_NEG) {
    344   1.1    bouyer 		/* we initiated wide negotiation */
    345   1.9    bouyer 		switch (tables->msg_in[3]) {
    346   1.1    bouyer 		case MSG_EXT_WDTR_BUS_8_BIT:
    347   1.9    bouyer 			siop_target->flags &= ~TARF_ISWIDE;
    348   1.1    bouyer 			sc->targets[target]->id &= ~(SCNTL3_EWS << 24);
    349   1.1    bouyer 			break;
    350   1.1    bouyer 		case MSG_EXT_WDTR_BUS_16_BIT:
    351   1.9    bouyer 			if (siop_target->flags & TARF_WIDE) {
    352   1.9    bouyer 				siop_target->flags |= TARF_ISWIDE;
    353   1.1    bouyer 				sc->targets[target]->id |= (SCNTL3_EWS << 24);
    354   1.1    bouyer 				break;
    355   1.1    bouyer 			}
    356  1.38   tsutsui 		/* FALLTHROUGH */
    357   1.1    bouyer 		default:
    358   1.1    bouyer 			/*
    359  1.51   tsutsui 			 * hum, we got more than what we can handle, shouldn't
    360   1.1    bouyer 			 * happen. Reject, and stay async
    361   1.1    bouyer 			 */
    362   1.9    bouyer 			siop_target->flags &= ~TARF_ISWIDE;
    363   1.1    bouyer 			siop_target->status = TARST_OK;
    364  1.14    bouyer 			siop_target->offset = siop_target->period = 0;
    365  1.14    bouyer 			siop_update_xfer_mode(sc, target);
    366   1.1    bouyer 			printf("%s: rejecting invalid wide negotiation from "
    367  1.50   tsutsui 			    "target %d (%d)\n", device_xname(sc->sc_dev),
    368  1.50   tsutsui 			    target,
    369   1.9    bouyer 			    tables->msg_in[3]);
    370  1.44     skrll 			tables->t_msgout.count = siop_htoc32(sc, 1);
    371   1.9    bouyer 			tables->msg_out[0] = MSG_MESSAGE_REJECT;
    372   1.1    bouyer 			return SIOP_NEG_MSGOUT;
    373   1.1    bouyer 		}
    374  1.44     skrll 		tables->id = siop_htoc32(sc, sc->targets[target]->id);
    375   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh,
    376   1.1    bouyer 		    SIOP_SCNTL3,
    377   1.1    bouyer 		    (sc->targets[target]->id >> 24) & 0xff);
    378   1.1    bouyer 		/* we now need to do sync */
    379   1.9    bouyer 		if (siop_target->flags & TARF_SYNC) {
    380   1.6    bouyer 			siop_target->status = TARST_SYNC_NEG;
    381  1.22    bouyer 			siop_sdtr_msg(siop_cmd, 0, sc->st_minsync,
    382  1.22    bouyer 			    (sc->maxoff > 31) ? 31 : sc->maxoff);
    383   1.6    bouyer 			return SIOP_NEG_MSGOUT;
    384   1.6    bouyer 		} else {
    385   1.6    bouyer 			siop_target->status = TARST_OK;
    386  1.14    bouyer 			siop_update_xfer_mode(sc, target);
    387   1.6    bouyer 			return SIOP_NEG_ACK;
    388   1.6    bouyer 		}
    389   1.1    bouyer 	} else {
    390   1.1    bouyer 		/* target initiated wide negotiation */
    391   1.9    bouyer 		if (tables->msg_in[3] >= MSG_EXT_WDTR_BUS_16_BIT
    392   1.9    bouyer 		    && (siop_target->flags & TARF_WIDE)) {
    393   1.9    bouyer 			siop_target->flags |= TARF_ISWIDE;
    394   1.1    bouyer 			sc->targets[target]->id |= SCNTL3_EWS << 24;
    395   1.1    bouyer 		} else {
    396   1.9    bouyer 			siop_target->flags &= ~TARF_ISWIDE;
    397   1.1    bouyer 			sc->targets[target]->id &= ~(SCNTL3_EWS << 24);
    398   1.1    bouyer 		}
    399  1.44     skrll 		tables->id = siop_htoc32(sc, sc->targets[target]->id);
    400   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3,
    401   1.1    bouyer 		    (sc->targets[target]->id >> 24) & 0xff);
    402   1.1    bouyer 		/*
    403   1.1    bouyer 		 * we did reset wide parameters, so fall back to async,
    404   1.8    bouyer 		 * but don't schedule a sync neg, target should initiate it
    405   1.1    bouyer 		 */
    406   1.1    bouyer 		siop_target->status = TARST_OK;
    407  1.14    bouyer 		siop_target->offset = siop_target->period = 0;
    408  1.14    bouyer 		siop_update_xfer_mode(sc, target);
    409  1.10    bouyer 		siop_wdtr_msg(siop_cmd, 0, (siop_target->flags & TARF_ISWIDE) ?
    410  1.10    bouyer 		    MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT);
    411   1.1    bouyer 		return SIOP_NEG_MSGOUT;
    412   1.1    bouyer 	}
    413   1.1    bouyer }
    414   1.1    bouyer 
    415   1.1    bouyer int
    416  1.47       dsl siop_ppr_neg(struct siop_common_cmd *siop_cmd)
    417  1.22    bouyer {
    418  1.22    bouyer 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    419  1.22    bouyer 	struct siop_common_target *siop_target = siop_cmd->siop_target;
    420  1.22    bouyer 	int target = siop_cmd->xs->xs_periph->periph_target;
    421  1.22    bouyer 	struct siop_common_xfer *tables = siop_cmd->siop_tables;
    422  1.22    bouyer 	int sync, offset, options, scf = 0;
    423  1.22    bouyer 	int i;
    424  1.22    bouyer 
    425  1.22    bouyer #ifdef DEBUG_NEG
    426  1.49   tsutsui 	printf("%s: answer on ppr negotiation:", device_xname(sc->sc_dev));
    427  1.22    bouyer 	for (i = 0; i < 8; i++)
    428  1.22    bouyer 		printf(" 0x%x", tables->msg_in[i]);
    429  1.22    bouyer 	printf("\n");
    430  1.22    bouyer #endif
    431  1.22    bouyer 
    432  1.22    bouyer 	if (siop_target->status == TARST_PPR_NEG) {
    433  1.22    bouyer 		/* we initiated PPR negotiation */
    434  1.22    bouyer 		sync = tables->msg_in[3];
    435  1.22    bouyer 		offset = tables->msg_in[5];
    436  1.22    bouyer 		options = tables->msg_in[7];
    437  1.22    bouyer 		if (options != MSG_EXT_PPR_DT) {
    438  1.22    bouyer 			/* should't happen */
    439  1.22    bouyer 			printf("%s: ppr negotiation for target %d: "
    440  1.49   tsutsui 			    "no DT option\n", device_xname(sc->sc_dev), target);
    441  1.22    bouyer 			siop_target->status = TARST_ASYNC;
    442  1.22    bouyer 			siop_target->flags &= ~(TARF_DT | TARF_ISDT);
    443  1.22    bouyer 			siop_target->offset = 0;
    444  1.22    bouyer 			siop_target->period = 0;
    445  1.22    bouyer 			goto reject;
    446  1.22    bouyer 		}
    447  1.37     perry 
    448  1.22    bouyer 		if (offset > sc->maxoff || sync < sc->dt_minsync ||
    449  1.22    bouyer 		    sync > sc->dt_maxsync) {
    450  1.22    bouyer 			printf("%s: ppr negotiation for target %d: "
    451  1.22    bouyer 			    "offset (%d) or sync (%d) out of range\n",
    452  1.49   tsutsui 			    device_xname(sc->sc_dev), target, offset, sync);
    453  1.22    bouyer 			/* should not happen */
    454  1.22    bouyer 			siop_target->offset = 0;
    455  1.22    bouyer 			siop_target->period = 0;
    456  1.22    bouyer 			goto reject;
    457  1.22    bouyer 		} else {
    458  1.50   tsutsui 			for (i = 0; i < __arraycount(dt_scf_period); i++) {
    459  1.22    bouyer 				if (sc->clock_period != dt_scf_period[i].clock)
    460  1.22    bouyer 					continue;
    461  1.22    bouyer 				if (dt_scf_period[i].period == sync) {
    462  1.22    bouyer 					/* ok, found it. we now are sync. */
    463  1.22    bouyer 					siop_target->offset = offset;
    464  1.22    bouyer 					siop_target->period = sync;
    465  1.22    bouyer 					scf = dt_scf_period[i].scf;
    466  1.22    bouyer 					siop_target->flags |= TARF_ISDT;
    467  1.22    bouyer 				}
    468  1.22    bouyer 			}
    469  1.22    bouyer 			if ((siop_target->flags & TARF_ISDT) == 0) {
    470  1.22    bouyer 				printf("%s: ppr negotiation for target %d: "
    471  1.22    bouyer 				    "sync (%d) incompatible with adapter\n",
    472  1.49   tsutsui 				    device_xname(sc->sc_dev), target, sync);
    473  1.22    bouyer 				/*
    474  1.22    bouyer 				 * we didn't find it in our table, do async
    475  1.22    bouyer 				 * send reject msg, start SDTR/WDTR neg
    476  1.22    bouyer 				 */
    477  1.22    bouyer 				siop_target->status = TARST_ASYNC;
    478  1.22    bouyer 				siop_target->flags &= ~(TARF_DT | TARF_ISDT);
    479  1.22    bouyer 				siop_target->offset = 0;
    480  1.22    bouyer 				siop_target->period = 0;
    481  1.22    bouyer 				goto reject;
    482  1.22    bouyer 			}
    483  1.22    bouyer 		}
    484  1.22    bouyer 		if (tables->msg_in[6] != 1) {
    485  1.22    bouyer 			printf("%s: ppr negotiation for target %d: "
    486  1.22    bouyer 			    "transfer width (%d) incompatible with dt\n",
    487  1.50   tsutsui 			    device_xname(sc->sc_dev),
    488  1.50   tsutsui 			    target, tables->msg_in[6]);
    489  1.22    bouyer 			/* DT mode can only be done with wide transfers */
    490  1.22    bouyer 			siop_target->status = TARST_ASYNC;
    491  1.22    bouyer 			goto reject;
    492  1.37     perry 		}
    493  1.22    bouyer 		siop_target->flags |= TARF_ISWIDE;
    494  1.22    bouyer 		sc->targets[target]->id |= (SCNTL3_EWS << 24);
    495  1.22    bouyer 		sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24);
    496  1.22    bouyer 		sc->targets[target]->id |= scf << (24 + SCNTL3_SCF_SHIFT);
    497  1.22    bouyer 		sc->targets[target]->id &= ~(SXFER_MO_MASK << 8);
    498  1.22    bouyer 		sc->targets[target]->id |=
    499  1.22    bouyer 		    (siop_target->offset & SXFER_MO_MASK) << 8;
    500  1.22    bouyer 		sc->targets[target]->id &= ~0xff;
    501  1.22    bouyer 		sc->targets[target]->id |= SCNTL4_U3EN;
    502  1.22    bouyer 		siop_target->status = TARST_OK;
    503  1.22    bouyer 		siop_update_xfer_mode(sc, target);
    504  1.22    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3,
    505  1.22    bouyer 		    (sc->targets[target]->id >> 24) & 0xff);
    506  1.22    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER,
    507  1.22    bouyer 		    (sc->targets[target]->id >> 8) & 0xff);
    508  1.22    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL4,
    509  1.22    bouyer 		    sc->targets[target]->id & 0xff);
    510  1.22    bouyer 		return SIOP_NEG_ACK;
    511  1.22    bouyer 	} else {
    512  1.22    bouyer 		/* target initiated PPR negotiation, shouldn't happen */
    513  1.22    bouyer 		printf("%s: rejecting invalid PPR negotiation from "
    514  1.49   tsutsui 		    "target %d\n", device_xname(sc->sc_dev), target);
    515  1.22    bouyer reject:
    516  1.44     skrll 		tables->t_msgout.count = siop_htoc32(sc, 1);
    517  1.22    bouyer 		tables->msg_out[0] = MSG_MESSAGE_REJECT;
    518  1.22    bouyer 		return SIOP_NEG_MSGOUT;
    519  1.22    bouyer 	}
    520  1.22    bouyer }
    521  1.22    bouyer 
    522  1.22    bouyer int
    523  1.47       dsl siop_sdtr_neg(struct siop_common_cmd *siop_cmd)
    524   1.1    bouyer {
    525  1.17    bouyer 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    526  1.17    bouyer 	struct siop_common_target *siop_target = siop_cmd->siop_target;
    527  1.14    bouyer 	int target = siop_cmd->xs->xs_periph->periph_target;
    528  1.22    bouyer 	int sync, maxoffset, offset, i;
    529   1.1    bouyer 	int send_msgout = 0;
    530  1.17    bouyer 	struct siop_common_xfer *tables = siop_cmd->siop_tables;
    531   1.1    bouyer 
    532  1.22    bouyer 	/* limit to Ultra/2 parameters, need PPR for Ultra/3 */
    533  1.22    bouyer 	maxoffset = (sc->maxoff > 31) ? 31 : sc->maxoff;
    534  1.22    bouyer 
    535   1.9    bouyer 	sync = tables->msg_in[3];
    536   1.9    bouyer 	offset = tables->msg_in[4];
    537   1.1    bouyer 
    538   1.1    bouyer 	if (siop_target->status == TARST_SYNC_NEG) {
    539   1.1    bouyer 		/* we initiated sync negotiation */
    540   1.1    bouyer 		siop_target->status = TARST_OK;
    541   1.1    bouyer #ifdef DEBUG
    542   1.1    bouyer 		printf("sdtr: sync %d offset %d\n", sync, offset);
    543   1.1    bouyer #endif
    544  1.22    bouyer 		if (offset > maxoffset || sync < sc->st_minsync ||
    545  1.22    bouyer 			sync > sc->st_maxsync)
    546   1.1    bouyer 			goto reject;
    547  1.50   tsutsui 		for (i = 0; i < __arraycount(scf_period); i++) {
    548   1.1    bouyer 			if (sc->clock_period != scf_period[i].clock)
    549   1.1    bouyer 				continue;
    550   1.1    bouyer 			if (scf_period[i].period == sync) {
    551   1.1    bouyer 				/* ok, found it. we now are sync. */
    552  1.14    bouyer 				siop_target->offset = offset;
    553  1.14    bouyer 				siop_target->period = sync;
    554   1.1    bouyer 				sc->targets[target]->id &=
    555   1.1    bouyer 				    ~(SCNTL3_SCF_MASK << 24);
    556   1.1    bouyer 				sc->targets[target]->id |= scf_period[i].scf
    557   1.1    bouyer 				    << (24 + SCNTL3_SCF_SHIFT);
    558  1.22    bouyer 				if (sync < 25 && /* Ultra */
    559  1.22    bouyer 				    (sc->features & SF_BUS_ULTRA3) == 0)
    560   1.1    bouyer 					sc->targets[target]->id |=
    561   1.1    bouyer 					    SCNTL3_ULTRA << 24;
    562   1.1    bouyer 				else
    563   1.1    bouyer 					sc->targets[target]->id &=
    564   1.1    bouyer 					    ~(SCNTL3_ULTRA << 24);
    565   1.1    bouyer 				sc->targets[target]->id &=
    566   1.7    bouyer 				    ~(SXFER_MO_MASK << 8);
    567   1.1    bouyer 				sc->targets[target]->id |=
    568   1.7    bouyer 				    (offset & SXFER_MO_MASK) << 8;
    569  1.25    bouyer 				sc->targets[target]->id &= ~0xff; /* scntl4 */
    570   1.1    bouyer 				goto end;
    571   1.1    bouyer 			}
    572   1.1    bouyer 		}
    573   1.1    bouyer 		/*
    574   1.1    bouyer 		 * we didn't find it in our table, do async and send reject
    575   1.1    bouyer 		 * msg
    576   1.1    bouyer 		 */
    577   1.1    bouyer reject:
    578   1.1    bouyer 		send_msgout = 1;
    579  1.44     skrll 		tables->t_msgout.count = siop_htoc32(sc, 1);
    580   1.9    bouyer 		tables->msg_out[0] = MSG_MESSAGE_REJECT;
    581   1.1    bouyer 		sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24);
    582   1.1    bouyer 		sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24);
    583   1.7    bouyer 		sc->targets[target]->id &= ~(SXFER_MO_MASK << 8);
    584  1.25    bouyer 		sc->targets[target]->id &= ~0xff; /* scntl4 */
    585  1.14    bouyer 		siop_target->offset = siop_target->period = 0;
    586   1.1    bouyer 	} else { /* target initiated sync neg */
    587   1.1    bouyer #ifdef DEBUG
    588   1.1    bouyer 		printf("sdtr (target): sync %d offset %d\n", sync, offset);
    589   1.1    bouyer #endif
    590  1.22    bouyer 		if (offset == 0 || sync > sc->st_maxsync) { /* async */
    591   1.1    bouyer 			goto async;
    592   1.1    bouyer 		}
    593  1.22    bouyer 		if (offset > maxoffset)
    594  1.22    bouyer 			offset = maxoffset;
    595  1.22    bouyer 		if (sync < sc->st_minsync)
    596  1.22    bouyer 			sync = sc->st_minsync;
    597   1.1    bouyer 		/* look for sync period */
    598  1.50   tsutsui 		for (i = 0; i < __arraycount(scf_period); i++) {
    599   1.1    bouyer 			if (sc->clock_period != scf_period[i].clock)
    600   1.1    bouyer 				continue;
    601   1.1    bouyer 			if (scf_period[i].period == sync) {
    602   1.1    bouyer 				/* ok, found it. we now are sync. */
    603  1.14    bouyer 				siop_target->offset = offset;
    604  1.14    bouyer 				siop_target->period = sync;
    605   1.1    bouyer 				sc->targets[target]->id &=
    606   1.1    bouyer 				    ~(SCNTL3_SCF_MASK << 24);
    607   1.1    bouyer 				sc->targets[target]->id |= scf_period[i].scf
    608   1.1    bouyer 				    << (24 + SCNTL3_SCF_SHIFT);
    609  1.22    bouyer 				if (sync < 25 && /* Ultra */
    610  1.22    bouyer 				    (sc->features & SF_BUS_ULTRA3) == 0)
    611   1.1    bouyer 					sc->targets[target]->id |=
    612   1.1    bouyer 					    SCNTL3_ULTRA << 24;
    613   1.1    bouyer 				else
    614   1.1    bouyer 					sc->targets[target]->id &=
    615   1.1    bouyer 					    ~(SCNTL3_ULTRA << 24);
    616   1.1    bouyer 				sc->targets[target]->id &=
    617   1.7    bouyer 				    ~(SXFER_MO_MASK << 8);
    618   1.1    bouyer 				sc->targets[target]->id |=
    619   1.7    bouyer 				    (offset & SXFER_MO_MASK) << 8;
    620  1.25    bouyer 				sc->targets[target]->id &= ~0xff; /* scntl4 */
    621  1.10    bouyer 				siop_sdtr_msg(siop_cmd, 0, sync, offset);
    622   1.1    bouyer 				send_msgout = 1;
    623   1.1    bouyer 				goto end;
    624   1.1    bouyer 			}
    625   1.1    bouyer 		}
    626   1.1    bouyer async:
    627  1.14    bouyer 		siop_target->offset = siop_target->period = 0;
    628   1.1    bouyer 		sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24);
    629   1.1    bouyer 		sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24);
    630   1.7    bouyer 		sc->targets[target]->id &= ~(SXFER_MO_MASK << 8);
    631  1.25    bouyer 		sc->targets[target]->id &= ~0xff; /* scntl4 */
    632  1.10    bouyer 		siop_sdtr_msg(siop_cmd, 0, 0, 0);
    633   1.1    bouyer 		send_msgout = 1;
    634   1.1    bouyer 	}
    635   1.1    bouyer end:
    636  1.14    bouyer 	if (siop_target->status == TARST_OK)
    637  1.14    bouyer 		siop_update_xfer_mode(sc, target);
    638   1.1    bouyer #ifdef DEBUG
    639   1.1    bouyer 	printf("id now 0x%x\n", sc->targets[target]->id);
    640   1.1    bouyer #endif
    641  1.44     skrll 	tables->id = siop_htoc32(sc, sc->targets[target]->id);
    642   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3,
    643   1.1    bouyer 	    (sc->targets[target]->id >> 24) & 0xff);
    644   1.7    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER,
    645   1.1    bouyer 	    (sc->targets[target]->id >> 8) & 0xff);
    646   1.1    bouyer 	if (send_msgout) {
    647   1.1    bouyer 		return SIOP_NEG_MSGOUT;
    648   1.1    bouyer 	} else {
    649   1.1    bouyer 		return SIOP_NEG_ACK;
    650   1.1    bouyer 	}
    651   1.1    bouyer }
    652   1.1    bouyer 
    653   1.1    bouyer void
    654  1.48       dsl siop_sdtr_msg(struct siop_common_cmd *siop_cmd, int offset, int ssync, int soff)
    655  1.10    bouyer {
    656  1.50   tsutsui 
    657  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 0] = MSG_EXTENDED;
    658  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 1] = MSG_EXT_SDTR_LEN;
    659  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 2] = MSG_EXT_SDTR;
    660  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 3] = ssync;
    661  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 4] = soff;
    662  1.17    bouyer 	siop_cmd->siop_tables->t_msgout.count =
    663  1.44     skrll 	    siop_htoc32(siop_cmd->siop_sc, offset + MSG_EXT_SDTR_LEN + 2);
    664  1.10    bouyer }
    665  1.10    bouyer 
    666  1.10    bouyer void
    667  1.47       dsl siop_wdtr_msg(struct siop_common_cmd *siop_cmd, int offset, int wide)
    668  1.10    bouyer {
    669  1.50   tsutsui 
    670  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 0] = MSG_EXTENDED;
    671  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 1] = MSG_EXT_WDTR_LEN;
    672  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 2] = MSG_EXT_WDTR;
    673  1.17    bouyer 	siop_cmd->siop_tables->msg_out[offset + 3] = wide;
    674  1.17    bouyer 	siop_cmd->siop_tables->t_msgout.count =
    675  1.44     skrll 	    siop_htoc32(siop_cmd->siop_sc, offset + MSG_EXT_WDTR_LEN + 2);
    676  1.22    bouyer }
    677  1.22    bouyer 
    678  1.22    bouyer void
    679  1.48       dsl siop_ppr_msg(struct siop_common_cmd *siop_cmd, int offset, int ssync, int soff)
    680  1.22    bouyer {
    681  1.50   tsutsui 
    682  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 0] = MSG_EXTENDED;
    683  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 1] = MSG_EXT_PPR_LEN;
    684  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 2] = MSG_EXT_PPR;
    685  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 3] = ssync;
    686  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 4] = 0; /* reserved */
    687  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 5] = soff;
    688  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 6] = 1; /* wide */
    689  1.22    bouyer 	siop_cmd->siop_tables->msg_out[offset + 7] = MSG_EXT_PPR_DT;
    690  1.22    bouyer 	siop_cmd->siop_tables->t_msgout.count =
    691  1.44     skrll 	    siop_htoc32(siop_cmd->siop_sc, offset + MSG_EXT_PPR_LEN + 2);
    692  1.10    bouyer }
    693  1.10    bouyer 
    694  1.10    bouyer void
    695  1.47       dsl siop_minphys(struct buf *bp)
    696   1.1    bouyer {
    697  1.50   tsutsui 
    698   1.1    bouyer 	minphys(bp);
    699   1.1    bouyer }
    700   1.1    bouyer 
    701   1.1    bouyer int
    702  1.42  christos siop_ioctl(struct scsipi_channel *chan, u_long cmd, void *arg,
    703  1.41  christos     int flag, struct proc *p)
    704   1.1    bouyer {
    705  1.49   tsutsui 	struct siop_common_softc *sc;
    706  1.49   tsutsui 
    707  1.49   tsutsui 	sc = device_private(chan->chan_adapter->adapt_dev);
    708   1.1    bouyer 
    709   1.1    bouyer 	switch (cmd) {
    710   1.1    bouyer 	case SCBUSIORESET:
    711  1.24    bouyer 		/*
    712  1.24    bouyer 		 * abort the script. This will trigger an interrupt, which will
    713  1.24    bouyer 		 * trigger a bus reset.
    714  1.24    bouyer 		 * We can't safely trigger the reset here as we can't access
    715  1.24    bouyer 		 * the required register while the script is running.
    716  1.24    bouyer 		 */
    717  1.24    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_ABRT);
    718   1.1    bouyer 		return (0);
    719   1.1    bouyer 	default:
    720   1.1    bouyer 		return (ENOTTY);
    721   1.1    bouyer 	}
    722   1.1    bouyer }
    723   1.1    bouyer 
    724   1.1    bouyer void
    725  1.47       dsl siop_ma(struct siop_common_cmd *siop_cmd)
    726   1.1    bouyer {
    727   1.1    bouyer 	int offset, dbc, sstat;
    728  1.17    bouyer 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    729  1.54    martin #ifdef DEBUG_DR
    730  1.35    bouyer 	scr_table_t *table; /* table with partial xfer */
    731  1.54    martin #endif
    732   1.1    bouyer 
    733  1.35    bouyer 	/*
    734  1.35    bouyer 	 * compute how much of the current table didn't get handled when
    735  1.35    bouyer 	 * a phase mismatch occurs
    736  1.35    bouyer 	 */
    737   1.1    bouyer 	if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN))
    738   1.1    bouyer 	    == 0)
    739  1.35    bouyer 	    return; /* no valid data transfer */
    740  1.35    bouyer 
    741   1.1    bouyer 	offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCRATCHA + 1);
    742   1.1    bouyer 	if (offset >= SIOP_NSG) {
    743  1.49   tsutsui 		aprint_error_dev(sc->sc_dev, "bad offset in siop_sdp (%d)\n",
    744  1.45    cegger 		    offset);
    745   1.1    bouyer 		return;
    746   1.1    bouyer 	}
    747  1.54    martin #ifdef DEBUG_DR
    748  1.17    bouyer 	table = &siop_cmd->siop_tables->data[offset];
    749  1.35    bouyer 	printf("siop_ma: offset %d count=%d addr=0x%x ", offset,
    750   1.1    bouyer 	    table->count, table->addr);
    751   1.1    bouyer #endif
    752   1.1    bouyer 	dbc = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DBC) & 0x00ffffff;
    753   1.1    bouyer 	if (siop_cmd->xs->xs_control & XS_CTL_DATA_OUT) {
    754  1.13    bouyer 		if (sc->features & SF_CHIP_DFBC) {
    755  1.13    bouyer 			dbc +=
    756  1.13    bouyer 			    bus_space_read_2(sc->sc_rt, sc->sc_rh, SIOP_DFBC);
    757   1.1    bouyer 		} else {
    758  1.13    bouyer 			/* need to account stale data in FIFO */
    759  1.13    bouyer 			int dfifo =
    760  1.13    bouyer 			    bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DFIFO);
    761  1.13    bouyer 			if (sc->features & SF_CHIP_FIFO) {
    762  1.13    bouyer 				dfifo |= (bus_space_read_1(sc->sc_rt, sc->sc_rh,
    763  1.13    bouyer 				    SIOP_CTEST5) & CTEST5_BOMASK) << 8;
    764  1.13    bouyer 				dbc += (dfifo - (dbc & 0x3ff)) & 0x3ff;
    765  1.13    bouyer 			} else {
    766  1.13    bouyer 				dbc += (dfifo - (dbc & 0x7f)) & 0x7f;
    767  1.13    bouyer 			}
    768   1.1    bouyer 		}
    769   1.1    bouyer 		sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT0);
    770   1.1    bouyer 		if (sstat & SSTAT0_OLF)
    771   1.1    bouyer 			dbc++;
    772  1.13    bouyer 		if ((sstat & SSTAT0_ORF) && (sc->features & SF_CHIP_DFBC) == 0)
    773   1.1    bouyer 			dbc++;
    774   1.9    bouyer 		if (siop_cmd->siop_target->flags & TARF_ISWIDE) {
    775   1.1    bouyer 			sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh,
    776   1.1    bouyer 			    SIOP_SSTAT2);
    777   1.1    bouyer 			if (sstat & SSTAT2_OLF1)
    778   1.1    bouyer 				dbc++;
    779  1.13    bouyer 			if ((sstat & SSTAT2_ORF1) &&
    780  1.13    bouyer 			    (sc->features & SF_CHIP_DFBC) == 0)
    781   1.1    bouyer 				dbc++;
    782   1.1    bouyer 		}
    783   1.1    bouyer 		/* clear the FIFO */
    784   1.1    bouyer 		bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3,
    785   1.1    bouyer 		    bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) |
    786   1.1    bouyer 		    CTEST3_CLF);
    787   1.1    bouyer 	}
    788  1.35    bouyer 	siop_cmd->flags |= CMDFL_RESID;
    789  1.35    bouyer 	siop_cmd->resid = dbc;
    790  1.35    bouyer }
    791  1.35    bouyer 
    792  1.35    bouyer void
    793  1.47       dsl siop_sdp(struct siop_common_cmd *siop_cmd, int offset)
    794  1.35    bouyer {
    795  1.44     skrll 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    796  1.35    bouyer 	scr_table_t *table;
    797  1.37     perry 
    798  1.35    bouyer 	if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN))
    799  1.35    bouyer 	    == 0)
    800  1.35    bouyer 	    return; /* no data pointers to save */
    801  1.35    bouyer 
    802  1.35    bouyer 	/*
    803  1.35    bouyer 	 * offset == SIOP_NSG may be a valid condition if we get a Save data
    804  1.35    bouyer 	 * pointer when the xfer is done. Just ignore the Save data pointer
    805  1.35    bouyer 	 * in this case
    806  1.35    bouyer 	 */
    807  1.35    bouyer 	if (offset == SIOP_NSG)
    808  1.35    bouyer 		return;
    809  1.35    bouyer #ifdef DIAGNOSTIC
    810  1.35    bouyer 	if (offset > SIOP_NSG) {
    811  1.35    bouyer 		scsipi_printaddr(siop_cmd->xs->xs_periph);
    812  1.35    bouyer 		printf(": offset %d > %d\n", offset, SIOP_NSG);
    813  1.35    bouyer 		panic("siop_sdp: offset");
    814  1.35    bouyer 	}
    815   1.1    bouyer #endif
    816  1.35    bouyer 	/*
    817  1.35    bouyer 	 * Save data pointer. We do this by adjusting the tables to point
    818  1.55   msaitoh 	 * at the begginning of the data not yet transferred.
    819  1.55   msaitoh 	 * offset points to the first table with untransferred data.
    820  1.35    bouyer 	 */
    821  1.35    bouyer 
    822  1.35    bouyer 	/*
    823  1.56    andvar 	 * before doing that we decrease resid from the amount of data which
    824  1.55   msaitoh 	 * has been transferred.
    825  1.35    bouyer 	 */
    826  1.35    bouyer 	siop_update_resid(siop_cmd, offset);
    827  1.35    bouyer 
    828  1.35    bouyer 	/*
    829  1.35    bouyer 	 * First let see if we have a resid from a phase mismatch. If so,
    830  1.55   msaitoh 	 * we have to adjst the table at offset to remove transferred data.
    831  1.35    bouyer 	 */
    832  1.35    bouyer 	if (siop_cmd->flags & CMDFL_RESID) {
    833  1.35    bouyer 		siop_cmd->flags &= ~CMDFL_RESID;
    834  1.35    bouyer 		table = &siop_cmd->siop_tables->data[offset];
    835  1.55   msaitoh 		/* "cut" already transferred data from this table */
    836  1.35    bouyer 		table->addr =
    837  1.44     skrll 		    siop_htoc32(sc, siop_ctoh32(sc, table->addr) +
    838  1.44     skrll 		    siop_ctoh32(sc, table->count) - siop_cmd->resid);
    839  1.44     skrll 		table->count = siop_htoc32(sc, siop_cmd->resid);
    840  1.35    bouyer 	}
    841  1.35    bouyer 
    842  1.35    bouyer 	/*
    843  1.55   msaitoh 	 * now we can remove entries which have been transferred.
    844  1.35    bouyer 	 * We just move the entries with data left at the beggining of the
    845  1.35    bouyer 	 * tables
    846  1.35    bouyer 	 */
    847  1.35    bouyer 	memmove(&siop_cmd->siop_tables->data[0],
    848  1.35    bouyer 	    &siop_cmd->siop_tables->data[offset],
    849  1.35    bouyer 	    (SIOP_NSG - offset) * sizeof(scr_table_t));
    850  1.35    bouyer }
    851  1.35    bouyer 
    852  1.35    bouyer void
    853  1.47       dsl siop_update_resid(struct siop_common_cmd *siop_cmd, int offset)
    854  1.35    bouyer {
    855  1.44     skrll 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    856  1.35    bouyer 	scr_table_t *table;
    857  1.35    bouyer 	int i;
    858  1.35    bouyer 
    859  1.35    bouyer 	if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN))
    860  1.35    bouyer 	    == 0)
    861  1.35    bouyer 	    return; /* no data to transfer */
    862  1.35    bouyer 
    863  1.35    bouyer 	/*
    864  1.35    bouyer 	 * update resid. First account for the table entries which have
    865  1.35    bouyer 	 * been fully completed.
    866  1.35    bouyer 	 */
    867  1.35    bouyer 	for (i = 0; i < offset; i++)
    868  1.35    bouyer 		siop_cmd->xs->resid -=
    869  1.44     skrll 		    siop_ctoh32(sc, siop_cmd->siop_tables->data[i].count);
    870  1.35    bouyer 	/*
    871  1.35    bouyer 	 * if CMDFL_RESID is set, the last table (pointed by offset) is a
    872  1.35    bouyer 	 * partial transfers. If not, offset points to the entry folloing
    873  1.35    bouyer 	 * the last full transfer.
    874  1.35    bouyer 	 */
    875  1.35    bouyer 	if (siop_cmd->flags & CMDFL_RESID) {
    876  1.35    bouyer 		table = &siop_cmd->siop_tables->data[offset];
    877  1.51   tsutsui 		siop_cmd->xs->resid -=
    878  1.44     skrll 		    siop_ctoh32(sc, table->count) - siop_cmd->resid;
    879  1.35    bouyer 	}
    880   1.1    bouyer }
    881   1.1    bouyer 
    882  1.36    bouyer int
    883  1.47       dsl siop_iwr(struct siop_common_cmd *siop_cmd)
    884  1.36    bouyer {
    885  1.36    bouyer 	int offset;
    886  1.36    bouyer 	scr_table_t *table; /* table with IWR */
    887  1.36    bouyer 	struct siop_common_softc *sc = siop_cmd->siop_sc;
    888  1.50   tsutsui 
    889  1.36    bouyer 	/* handle ignore wide residue messages */
    890  1.36    bouyer 
    891  1.36    bouyer 	/* if target isn't wide, reject */
    892  1.36    bouyer 	if ((siop_cmd->siop_target->flags & TARF_ISWIDE) == 0) {
    893  1.44     skrll 		siop_cmd->siop_tables->t_msgout.count = siop_htoc32(sc, 1);
    894  1.36    bouyer 		siop_cmd->siop_tables->msg_out[0] = MSG_MESSAGE_REJECT;
    895  1.36    bouyer 		return SIOP_NEG_MSGOUT;
    896  1.36    bouyer 	}
    897  1.36    bouyer 	/* get index of current command in table */
    898  1.36    bouyer 	offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCRATCHA + 1);
    899  1.36    bouyer 	/*
    900  1.36    bouyer 	 * if the current table did complete, we're now pointing at the
    901  1.36    bouyer 	 * next one. Go back one if we didn't see a phase mismatch.
    902  1.36    bouyer 	 */
    903  1.36    bouyer 	if ((siop_cmd->flags & CMDFL_RESID) == 0)
    904  1.36    bouyer 		offset--;
    905  1.36    bouyer 	table = &siop_cmd->siop_tables->data[offset];
    906  1.36    bouyer 
    907  1.36    bouyer 	if ((siop_cmd->flags & CMDFL_RESID) == 0) {
    908  1.44     skrll 		if (siop_ctoh32(sc, table->count) & 1) {
    909  1.36    bouyer 			/* we really got the number of bytes we expected */
    910  1.36    bouyer 			return SIOP_NEG_ACK;
    911  1.36    bouyer 		} else {
    912  1.36    bouyer 			/*
    913  1.36    bouyer 			 * now we really had a short xfer, by one byte.
    914  1.36    bouyer 			 * handle it just as if we had a phase mistmatch
    915  1.36    bouyer 			 * (there is a resid of one for this table).
    916  1.36    bouyer 			 * Update scratcha1 to reflect the fact that
    917  1.36    bouyer 			 * this xfer isn't complete.
    918  1.36    bouyer 			 */
    919  1.36    bouyer 			 siop_cmd->flags |= CMDFL_RESID;
    920  1.36    bouyer 			 siop_cmd->resid = 1;
    921  1.36    bouyer 			 bus_space_write_1(sc->sc_rt, sc->sc_rh,
    922  1.36    bouyer 			     SIOP_SCRATCHA + 1, offset);
    923  1.36    bouyer 			 return SIOP_NEG_ACK;
    924  1.36    bouyer 		}
    925  1.36    bouyer 	} else {
    926  1.36    bouyer 		/*
    927  1.36    bouyer 		 * we already have a short xfer for this table; it's
    928  1.36    bouyer 		 * just one byte less than we though it was
    929  1.36    bouyer 		 */
    930  1.36    bouyer 		siop_cmd->resid--;
    931  1.36    bouyer 		return SIOP_NEG_ACK;
    932  1.36    bouyer 	}
    933  1.36    bouyer }
    934  1.36    bouyer 
    935   1.1    bouyer void
    936  1.47       dsl siop_clearfifo(struct siop_common_softc *sc)
    937   1.1    bouyer {
    938   1.1    bouyer 	int timeout = 0;
    939   1.1    bouyer 	int ctest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3);
    940   1.1    bouyer 
    941   1.1    bouyer #ifdef DEBUG_INTR
    942   1.1    bouyer 	printf("DMA fifo not empty !\n");
    943   1.1    bouyer #endif
    944   1.1    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3,
    945   1.1    bouyer 	    ctest3 | CTEST3_CLF);
    946   1.1    bouyer 	while ((bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) &
    947   1.1    bouyer 	    CTEST3_CLF) != 0) {
    948   1.1    bouyer 		delay(1);
    949   1.1    bouyer 		if (++timeout > 1000) {
    950   1.1    bouyer 			printf("clear fifo failed\n");
    951   1.1    bouyer 			bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3,
    952   1.1    bouyer 			    bus_space_read_1(sc->sc_rt, sc->sc_rh,
    953   1.1    bouyer 			    SIOP_CTEST3) & ~CTEST3_CLF);
    954   1.1    bouyer 			return;
    955   1.1    bouyer 		}
    956   1.1    bouyer 	}
    957   1.3    bouyer }
    958   1.3    bouyer 
    959   1.3    bouyer int
    960  1.47       dsl siop_modechange(struct siop_common_softc *sc)
    961   1.3    bouyer {
    962   1.3    bouyer 	int retry;
    963  1.54    martin 	int sist1, stest2;
    964  1.50   tsutsui 
    965   1.3    bouyer 	for (retry = 0; retry < 5; retry++) {
    966   1.3    bouyer 		/*
    967   1.3    bouyer 		 * datasheet says to wait 100ms and re-read SIST1,
    968  1.14    bouyer 		 * to check that DIFFSENSE is stable.
    969   1.3    bouyer 		 * We may delay() 5 times for  100ms at interrupt time;
    970   1.3    bouyer 		 * hopefully this will not happen often.
    971   1.3    bouyer 		 */
    972   1.3    bouyer 		delay(100000);
    973  1.54    martin 		(void)bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST0);
    974   1.3    bouyer 		sist1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST1);
    975   1.3    bouyer 		if (sist1 & SIEN1_SBMC)
    976   1.3    bouyer 			continue; /* we got an irq again */
    977  1.27    bouyer 		sc->mode = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST4) &
    978   1.3    bouyer 		    STEST4_MODE_MASK;
    979   1.3    bouyer 		stest2 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2);
    980  1.27    bouyer 		switch(sc->mode) {
    981   1.3    bouyer 		case STEST4_MODE_DIF:
    982   1.3    bouyer 			printf("%s: switching to differential mode\n",
    983  1.49   tsutsui 			    device_xname(sc->sc_dev));
    984   1.3    bouyer 			bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2,
    985   1.3    bouyer 			    stest2 | STEST2_DIF);
    986   1.3    bouyer 			break;
    987   1.3    bouyer 		case STEST4_MODE_SE:
    988   1.3    bouyer 			printf("%s: switching to single-ended mode\n",
    989  1.49   tsutsui 			    device_xname(sc->sc_dev));
    990   1.3    bouyer 			bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2,
    991   1.3    bouyer 			    stest2 & ~STEST2_DIF);
    992   1.3    bouyer 			break;
    993   1.3    bouyer 		case STEST4_MODE_LVD:
    994   1.3    bouyer 			printf("%s: switching to LVD mode\n",
    995  1.49   tsutsui 			    device_xname(sc->sc_dev));
    996   1.3    bouyer 			bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2,
    997   1.3    bouyer 			    stest2 & ~STEST2_DIF);
    998   1.3    bouyer 			break;
    999   1.3    bouyer 		default:
   1000  1.49   tsutsui 			aprint_error_dev(sc->sc_dev, "invalid SCSI mode 0x%x\n",
   1001  1.45    cegger 			    sc->mode);
   1002   1.3    bouyer 			return 0;
   1003   1.3    bouyer 		}
   1004   1.3    bouyer 		return 1;
   1005   1.3    bouyer 	}
   1006   1.3    bouyer 	printf("%s: timeout waiting for DIFFSENSE to stabilise\n",
   1007  1.49   tsutsui 	    device_xname(sc->sc_dev));
   1008   1.3    bouyer 	return 0;
   1009   1.6    bouyer }
   1010   1.6    bouyer 
   1011   1.6    bouyer void
   1012  1.47       dsl siop_resetbus(struct siop_common_softc *sc)
   1013   1.6    bouyer {
   1014   1.6    bouyer 	int scntl1;
   1015  1.50   tsutsui 
   1016   1.6    bouyer 	scntl1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1);
   1017   1.6    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1,
   1018   1.6    bouyer 	    scntl1 | SCNTL1_RST);
   1019   1.6    bouyer 	/* minimum 25 us, more time won't hurt */
   1020   1.6    bouyer 	delay(100);
   1021   1.6    bouyer 	bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, scntl1);
   1022  1.17    bouyer }
   1023  1.17    bouyer 
   1024  1.17    bouyer void
   1025  1.47       dsl siop_update_xfer_mode(struct siop_common_softc *sc, int target)
   1026  1.17    bouyer {
   1027  1.17    bouyer 	struct siop_common_target *siop_target = sc->targets[target];
   1028  1.17    bouyer 	struct scsipi_xfer_mode xm;
   1029  1.17    bouyer 
   1030  1.17    bouyer 	xm.xm_target = target;
   1031  1.17    bouyer 	xm.xm_mode = 0;
   1032  1.17    bouyer 	xm.xm_period = 0;
   1033  1.17    bouyer 	xm.xm_offset = 0;
   1034  1.26    bouyer 
   1035  1.17    bouyer 	if (siop_target->flags & TARF_ISWIDE)
   1036  1.17    bouyer 		xm.xm_mode |= PERIPH_CAP_WIDE16;
   1037  1.17    bouyer 	if (siop_target->period) {
   1038  1.17    bouyer 		xm.xm_period = siop_target->period;
   1039  1.17    bouyer 		xm.xm_offset = siop_target->offset;
   1040  1.17    bouyer 		xm.xm_mode |= PERIPH_CAP_SYNC;
   1041  1.17    bouyer 	}
   1042  1.28    bouyer 	if (siop_target->flags & TARF_TAG) {
   1043  1.28    bouyer 	/* 1010 workaround: can't do disconnect if not wide, so can't do tag */
   1044  1.28    bouyer 		if ((sc->features & SF_CHIP_GEBUG) == 0 ||
   1045  1.28    bouyer 		    (sc->targets[target]->flags & TARF_ISWIDE))
   1046  1.28    bouyer 			xm.xm_mode |= PERIPH_CAP_TQING;
   1047  1.28    bouyer 	}
   1048  1.28    bouyer 
   1049  1.17    bouyer 	scsipi_async_event(&sc->sc_chan, ASYNC_EVENT_XFER_MODE, &xm);
   1050   1.1    bouyer }
   1051