Home | History | Annotate | Line # | Download | only in ic
smc83c170.c revision 1.32.4.1
      1 /*	$NetBSD: smc83c170.c,v 1.32.4.1 2000/11/09 23:16:23 tv Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
      9  * NASA Ames Research Center.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  * 3. All advertising materials mentioning features or use of this software
     20  *    must display the following acknowledgement:
     21  *	This product includes software developed by the NetBSD
     22  *	Foundation, Inc. and its contributors.
     23  * 4. Neither the name of The NetBSD Foundation nor the names of its
     24  *    contributors may be used to endorse or promote products derived
     25  *    from this software without specific prior written permission.
     26  *
     27  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     29  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     30  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     31  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     32  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     35  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     37  * POSSIBILITY OF SUCH DAMAGE.
     38  */
     39 
     40 /*
     41  * Device driver for the Standard Microsystems Corp. 83C170
     42  * Ethernet PCI Integrated Controller (EPIC/100).
     43  */
     44 
     45 #include "opt_inet.h"
     46 #include "opt_ns.h"
     47 #include "bpfilter.h"
     48 
     49 #include <sys/param.h>
     50 #include <sys/systm.h>
     51 #include <sys/callout.h>
     52 #include <sys/mbuf.h>
     53 #include <sys/malloc.h>
     54 #include <sys/kernel.h>
     55 #include <sys/socket.h>
     56 #include <sys/ioctl.h>
     57 #include <sys/errno.h>
     58 #include <sys/device.h>
     59 
     60 #include <net/if.h>
     61 #include <net/if_dl.h>
     62 #include <net/if_media.h>
     63 #include <net/if_ether.h>
     64 
     65 #if NBPFILTER > 0
     66 #include <net/bpf.h>
     67 #endif
     68 
     69 #ifdef INET
     70 #include <netinet/in.h>
     71 #include <netinet/if_inarp.h>
     72 #endif
     73 
     74 #ifdef NS
     75 #include <netns/ns.h>
     76 #include <netns/ns_if.h>
     77 #endif
     78 
     79 #include <machine/bus.h>
     80 #include <machine/intr.h>
     81 
     82 #include <dev/mii/miivar.h>
     83 
     84 #include <dev/ic/smc83c170reg.h>
     85 #include <dev/ic/smc83c170var.h>
     86 
     87 void	epic_start __P((struct ifnet *));
     88 void	epic_watchdog __P((struct ifnet *));
     89 int	epic_ioctl __P((struct ifnet *, u_long, caddr_t));
     90 
     91 void	epic_shutdown __P((void *));
     92 
     93 void	epic_reset __P((struct epic_softc *));
     94 int	epic_init __P((struct epic_softc *));
     95 void	epic_rxdrain __P((struct epic_softc *));
     96 void	epic_stop __P((struct epic_softc *, int));
     97 int	epic_add_rxbuf __P((struct epic_softc *, int));
     98 void	epic_read_eeprom __P((struct epic_softc *, int, int, u_int16_t *));
     99 void	epic_set_mchash __P((struct epic_softc *));
    100 void	epic_fixup_clock_source __P((struct epic_softc *));
    101 int	epic_mii_read __P((struct device *, int, int));
    102 void	epic_mii_write __P((struct device *, int, int, int));
    103 int	epic_mii_wait __P((struct epic_softc *, u_int32_t));
    104 void	epic_tick __P((void *));
    105 
    106 void	epic_statchg __P((struct device *));
    107 int	epic_mediachange __P((struct ifnet *));
    108 void	epic_mediastatus __P((struct ifnet *, struct ifmediareq *));
    109 
    110 #define	INTMASK	(INTSTAT_FATAL_INT | INTSTAT_TXU | \
    111 	    INTSTAT_TXC | INTSTAT_RXE | INTSTAT_RQE | INTSTAT_RCC)
    112 
    113 int	epic_copy_small = 0;
    114 
    115 /*
    116  * Attach an EPIC interface to the system.
    117  */
    118 void
    119 epic_attach(sc)
    120 	struct epic_softc *sc;
    121 {
    122 	bus_space_tag_t st = sc->sc_st;
    123 	bus_space_handle_t sh = sc->sc_sh;
    124 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
    125 	int i, rseg, error;
    126 	bus_dma_segment_t seg;
    127 	u_int8_t enaddr[ETHER_ADDR_LEN], devname[12 + 1];
    128 	u_int16_t myea[ETHER_ADDR_LEN / 2], mydevname[6];
    129 
    130 	callout_init(&sc->sc_mii_callout);
    131 
    132 	/*
    133 	 * Allocate the control data structures, and create and load the
    134 	 * DMA map for it.
    135 	 */
    136 	if ((error = bus_dmamem_alloc(sc->sc_dmat,
    137 	    sizeof(struct epic_control_data), NBPG, 0, &seg, 1, &rseg,
    138 	    BUS_DMA_NOWAIT)) != 0) {
    139 		printf("%s: unable to allocate control data, error = %d\n",
    140 		    sc->sc_dev.dv_xname, error);
    141 		goto fail_0;
    142 	}
    143 
    144 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
    145 	    sizeof(struct epic_control_data), (caddr_t *)&sc->sc_control_data,
    146 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
    147 		printf("%s: unable to map control data, error = %d\n",
    148 		    sc->sc_dev.dv_xname, error);
    149 		goto fail_1;
    150 	}
    151 
    152 	if ((error = bus_dmamap_create(sc->sc_dmat,
    153 	    sizeof(struct epic_control_data), 1,
    154 	    sizeof(struct epic_control_data), 0, BUS_DMA_NOWAIT,
    155 	    &sc->sc_cddmamap)) != 0) {
    156 		printf("%s: unable to create control data DMA map, "
    157 		    "error = %d\n", sc->sc_dev.dv_xname, error);
    158 		goto fail_2;
    159 	}
    160 
    161 	if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
    162 	    sc->sc_control_data, sizeof(struct epic_control_data), NULL,
    163 	    BUS_DMA_NOWAIT)) != 0) {
    164 		printf("%s: unable to load control data DMA map, error = %d\n",
    165 		    sc->sc_dev.dv_xname, error);
    166 		goto fail_3;
    167 	}
    168 
    169 	/*
    170 	 * Create the transmit buffer DMA maps.
    171 	 */
    172 	for (i = 0; i < EPIC_NTXDESC; i++) {
    173 		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
    174 		    EPIC_NFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT,
    175 		    &EPIC_DSTX(sc, i)->ds_dmamap)) != 0) {
    176 			printf("%s: unable to create tx DMA map %d, "
    177 			    "error = %d\n", sc->sc_dev.dv_xname, i, error);
    178 			goto fail_4;
    179 		}
    180 	}
    181 
    182 	/*
    183 	 * Create the recieve buffer DMA maps.
    184 	 */
    185 	for (i = 0; i < EPIC_NRXDESC; i++) {
    186 		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
    187 		    MCLBYTES, 0, BUS_DMA_NOWAIT,
    188 		    &EPIC_DSRX(sc, i)->ds_dmamap)) != 0) {
    189 			printf("%s: unable to create rx DMA map %d, "
    190 			    "error = %d\n", sc->sc_dev.dv_xname, i, error);
    191 			goto fail_5;
    192 		}
    193 		EPIC_DSRX(sc, i)->ds_mbuf = NULL;
    194 	}
    195 
    196 
    197 	/*
    198 	 * Bring the chip out of low-power mode and reset it to a known state.
    199 	 */
    200 	bus_space_write_4(st, sh, EPIC_GENCTL, 0);
    201 	epic_reset(sc);
    202 
    203 	/*
    204 	 * Read the Ethernet address from the EEPROM.
    205 	 */
    206 	epic_read_eeprom(sc, 0, (sizeof(myea) / sizeof(myea[0])), myea);
    207 	for (i = 0; i < sizeof(myea)/ sizeof(myea[0]); i++) {
    208 		enaddr[i * 2]     = myea[i] & 0xff;
    209 		enaddr[i * 2 + 1] = myea[i] >> 8;
    210 	}
    211 
    212 	/*
    213 	 * ...and the device name.
    214 	 */
    215 	epic_read_eeprom(sc, 0x2c, (sizeof(mydevname) / sizeof(mydevname[0])),
    216 	    mydevname);
    217 	for (i = 0; i < sizeof(mydevname) / sizeof(mydevname[0]); i++) {
    218 		devname[i * 2]     = mydevname[i] & 0xff;
    219 		devname[i * 2 + 1] = mydevname[i] >> 8;
    220 	}
    221 
    222 	devname[sizeof(mydevname)] = '\0';
    223 	for (i = sizeof(mydevname) - 1; i >= 0; i--) {
    224 		if (devname[i] == ' ')
    225 			devname[i] = '\0';
    226 		else
    227 			break;
    228 	}
    229 
    230 	printf("%s: %s, Ethernet address %s\n", sc->sc_dev.dv_xname,
    231 	    devname, ether_sprintf(enaddr));
    232 
    233 	/*
    234 	 * Initialize our media structures and probe the MII.
    235 	 */
    236 	sc->sc_mii.mii_ifp = ifp;
    237 	sc->sc_mii.mii_readreg = epic_mii_read;
    238 	sc->sc_mii.mii_writereg = epic_mii_write;
    239 	sc->sc_mii.mii_statchg = epic_statchg;
    240 	ifmedia_init(&sc->sc_mii.mii_media, 0, epic_mediachange,
    241 	    epic_mediastatus);
    242 	mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
    243 	    MII_OFFSET_ANY, 0);
    244 	if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
    245 		ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
    246 		ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
    247 	} else
    248 		ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
    249 
    250 	strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
    251 	ifp->if_softc = sc;
    252 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
    253 	ifp->if_ioctl = epic_ioctl;
    254 	ifp->if_start = epic_start;
    255 	ifp->if_watchdog = epic_watchdog;
    256 
    257 	/*
    258 	 * Attach the interface.
    259 	 */
    260 	if_attach(ifp);
    261 	ether_ifattach(ifp, enaddr);
    262 #if NBPFILTER > 0
    263 	bpfattach(&sc->sc_ethercom.ec_if.if_bpf, ifp, DLT_EN10MB,
    264 	    sizeof(struct ether_header));
    265 #endif
    266 
    267 	/*
    268 	 * Make sure the interface is shutdown during reboot.
    269 	 */
    270 	sc->sc_sdhook = shutdownhook_establish(epic_shutdown, sc);
    271 	if (sc->sc_sdhook == NULL)
    272 		printf("%s: WARNING: unable to establish shutdown hook\n",
    273 		    sc->sc_dev.dv_xname);
    274 	return;
    275 
    276 	/*
    277 	 * Free any resources we've allocated during the failed attach
    278 	 * attempt.  Do this in reverse order and fall through.
    279 	 */
    280  fail_5:
    281 	for (i = 0; i < EPIC_NRXDESC; i++) {
    282 		if (EPIC_DSRX(sc, i)->ds_dmamap != NULL)
    283 			bus_dmamap_destroy(sc->sc_dmat,
    284 			    EPIC_DSRX(sc, i)->ds_dmamap);
    285 	}
    286  fail_4:
    287 	for (i = 0; i < EPIC_NTXDESC; i++) {
    288 		if (EPIC_DSTX(sc, i)->ds_dmamap != NULL)
    289 			bus_dmamap_destroy(sc->sc_dmat,
    290 			    EPIC_DSTX(sc, i)->ds_dmamap);
    291 	}
    292 	bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
    293  fail_3:
    294 	bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
    295  fail_2:
    296 	bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data,
    297 	    sizeof(struct epic_control_data));
    298  fail_1:
    299 	bus_dmamem_free(sc->sc_dmat, &seg, rseg);
    300  fail_0:
    301 	return;
    302 }
    303 
    304 /*
    305  * Shutdown hook.  Make sure the interface is stopped at reboot.
    306  */
    307 void
    308 epic_shutdown(arg)
    309 	void *arg;
    310 {
    311 	struct epic_softc *sc = arg;
    312 
    313 	epic_stop(sc, 1);
    314 }
    315 
    316 /*
    317  * Start packet transmission on the interface.
    318  * [ifnet interface function]
    319  */
    320 void
    321 epic_start(ifp)
    322 	struct ifnet *ifp;
    323 {
    324 	struct epic_softc *sc = ifp->if_softc;
    325 	struct mbuf *m0, *m;
    326 	struct epic_txdesc *txd;
    327 	struct epic_descsoft *ds;
    328 	struct epic_fraglist *fr;
    329 	bus_dmamap_t dmamap;
    330 	int error, firsttx, nexttx, opending, seg;
    331 
    332 	/*
    333 	 * Remember the previous txpending and the first transmit
    334 	 * descriptor we use.
    335 	 */
    336 	opending = sc->sc_txpending;
    337 	firsttx = EPIC_NEXTTX(sc->sc_txlast);
    338 
    339 	/*
    340 	 * Loop through the send queue, setting up transmit descriptors
    341 	 * until we drain the queue, or use up all available transmit
    342 	 * descriptors.
    343 	 */
    344 	while (sc->sc_txpending < EPIC_NTXDESC) {
    345 		/*
    346 		 * Grab a packet off the queue.
    347 		 */
    348 		IF_DEQUEUE(&ifp->if_snd, m0);
    349 		if (m0 == NULL)
    350 			break;
    351 
    352 		/*
    353 		 * Get the last and next available transmit descriptor.
    354 		 */
    355 		nexttx = EPIC_NEXTTX(sc->sc_txlast);
    356 		txd = EPIC_CDTX(sc, nexttx);
    357 		fr = EPIC_CDFL(sc, nexttx);
    358 		ds = EPIC_DSTX(sc, nexttx);
    359 		dmamap = ds->ds_dmamap;
    360 
    361 		/*
    362 		 * Load the DMA map.  If this fails, the packet either
    363 		 * didn't fit in the alloted number of frags, or we were
    364 		 * short on resources.  In this case, we'll copy and try
    365 		 * again.
    366 		 */
    367 		if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
    368 		    BUS_DMA_NOWAIT) != 0) {
    369 			MGETHDR(m, M_DONTWAIT, MT_DATA);
    370 			if (m == NULL) {
    371 				printf("%s: unable to allocate Tx mbuf\n",
    372 				    sc->sc_dev.dv_xname);
    373 				IF_PREPEND(&ifp->if_snd, m0);
    374 				break;
    375 			}
    376 			if (m0->m_pkthdr.len > MHLEN) {
    377 				MCLGET(m, M_DONTWAIT);
    378 				if ((m->m_flags & M_EXT) == 0) {
    379 					printf("%s: unable to allocate Tx "
    380 					    "cluster\n", sc->sc_dev.dv_xname);
    381 					m_freem(m);
    382 					IF_PREPEND(&ifp->if_snd, m0);
    383 					break;
    384 				}
    385 			}
    386 			m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t));
    387 			m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
    388 			m_freem(m0);
    389 			m0 = m;
    390 			error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap,
    391 			    m0, BUS_DMA_NOWAIT);
    392 			if (error) {
    393 				printf("%s: unable to load Tx buffer, "
    394 				    "error = %d\n", sc->sc_dev.dv_xname, error);
    395 				IF_PREPEND(&ifp->if_snd, m0);
    396 				break;
    397 			}
    398 		}
    399 
    400 		/* Initialize the fraglist. */
    401 		fr->ef_nfrags = dmamap->dm_nsegs;
    402 		for (seg = 0; seg < dmamap->dm_nsegs; seg++) {
    403 			fr->ef_frags[seg].ef_addr =
    404 			    dmamap->dm_segs[seg].ds_addr;
    405 			fr->ef_frags[seg].ef_length =
    406 			    dmamap->dm_segs[seg].ds_len;
    407 		}
    408 
    409 		EPIC_CDFLSYNC(sc, nexttx, BUS_DMASYNC_PREWRITE);
    410 
    411 		/* Sync the DMA map. */
    412 		bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
    413 		    BUS_DMASYNC_PREWRITE);
    414 
    415 		/*
    416 		 * Store a pointer to the packet so we can free it later.
    417 		 */
    418 		ds->ds_mbuf = m0;
    419 
    420 		/*
    421 		 * Fill in the transmit descriptor.  The EPIC doesn't
    422 		 * auto-pad, so we have to do this ourselves.
    423 		 */
    424 		txd->et_control = ET_TXCTL_LASTDESC | ET_TXCTL_FRAGLIST;
    425 		txd->et_txlength = max(m0->m_pkthdr.len,
    426 		    ETHER_MIN_LEN - ETHER_CRC_LEN);
    427 
    428 		/*
    429 		 * If this is the first descriptor we're enqueueing,
    430 		 * don't give it to the EPIC yet.  That could cause
    431 		 * a race condition.  We'll do it below.
    432 		 */
    433 		if (nexttx == firsttx)
    434 			txd->et_txstatus = 0;
    435 		else
    436 			txd->et_txstatus = ET_TXSTAT_OWNER;
    437 
    438 		EPIC_CDTXSYNC(sc, nexttx,
    439 		    BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
    440 
    441 		/* Advance the tx pointer. */
    442 		sc->sc_txpending++;
    443 		sc->sc_txlast = nexttx;
    444 
    445 #if NBPFILTER > 0
    446 		/*
    447 		 * Pass the packet to any BPF listeners.
    448 		 */
    449 		if (ifp->if_bpf)
    450 			bpf_mtap(ifp->if_bpf, m0);
    451 #endif
    452 	}
    453 
    454 	if (sc->sc_txpending == EPIC_NTXDESC) {
    455 		/* No more slots left; notify upper layer. */
    456 		ifp->if_flags |= IFF_OACTIVE;
    457 	}
    458 
    459 	if (sc->sc_txpending != opending) {
    460 		/*
    461 		 * We enqueued packets.  If the transmitter was idle,
    462 		 * reset the txdirty pointer.
    463 		 */
    464 		if (opending == 0)
    465 			sc->sc_txdirty = firsttx;
    466 
    467 		/*
    468 		 * Cause a transmit interrupt to happen on the
    469 		 * last packet we enqueued.
    470 		 */
    471 		EPIC_CDTX(sc, sc->sc_txlast)->et_control |= ET_TXCTL_IAF;
    472 		EPIC_CDTXSYNC(sc, sc->sc_txlast,
    473 		    BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
    474 
    475 		/*
    476 		 * The entire packet chain is set up.  Give the
    477 		 * first descriptor to the EPIC now.
    478 		 */
    479 		EPIC_CDTX(sc, firsttx)->et_txstatus = ET_TXSTAT_OWNER;
    480 		EPIC_CDTXSYNC(sc, firsttx,
    481 		    BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
    482 
    483 		/* Start the transmitter. */
    484 		bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_COMMAND,
    485 		    COMMAND_TXQUEUED);
    486 
    487 		/* Set a watchdog timer in case the chip flakes out. */
    488 		ifp->if_timer = 5;
    489 	}
    490 }
    491 
    492 /*
    493  * Watchdog timer handler.
    494  * [ifnet interface function]
    495  */
    496 void
    497 epic_watchdog(ifp)
    498 	struct ifnet *ifp;
    499 {
    500 	struct epic_softc *sc = ifp->if_softc;
    501 
    502 	printf("%s: device timeout\n", sc->sc_dev.dv_xname);
    503 	ifp->if_oerrors++;
    504 
    505 	(void) epic_init(sc);
    506 }
    507 
    508 /*
    509  * Handle control requests from the operator.
    510  * [ifnet interface function]
    511  */
    512 int
    513 epic_ioctl(ifp, cmd, data)
    514 	struct ifnet *ifp;
    515 	u_long cmd;
    516 	caddr_t data;
    517 {
    518 	struct epic_softc *sc = ifp->if_softc;
    519 	struct ifreq *ifr = (struct ifreq *)data;
    520 	struct ifaddr *ifa = (struct ifaddr *)data;
    521 	int s, error = 0;
    522 
    523 	s = splnet();
    524 
    525 	switch (cmd) {
    526 	case SIOCSIFADDR:
    527 		ifp->if_flags |= IFF_UP;
    528 
    529 		switch (ifa->ifa_addr->sa_family) {
    530 #ifdef INET
    531 		case AF_INET:
    532 			if ((error = epic_init(sc)) != 0)
    533 				break;
    534 			arp_ifinit(ifp, ifa);
    535 			break;
    536 #endif /* INET */
    537 #ifdef NS
    538 		case AF_NS:
    539 		    {
    540 			struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
    541 
    542 			if (ns_nullhost(*ina))
    543 				ina->x_host = *(union ns_host *)
    544 				    LLADDR(ifp->if_sadl);
    545 			else
    546 				bcopy(ina->x_host.c_host, LLADDR(ifp->if_sadl),
    547 				    ifp->if_addrlen);
    548 			/* Set new address. */
    549 			error = epic_init(sc);
    550 			break;
    551 		    }
    552 #endif /* NS */
    553 		default:
    554 			error = epic_init(sc);
    555 			break;
    556 		}
    557 		break;
    558 
    559 	case SIOCSIFMTU:
    560 		if (ifr->ifr_mtu > ETHERMTU)
    561 			error = EINVAL;
    562 		else
    563 			ifp->if_mtu = ifr->ifr_mtu;
    564 		break;
    565 
    566 	case SIOCSIFFLAGS:
    567 		if ((ifp->if_flags & IFF_UP) == 0 &&
    568 		    (ifp->if_flags & IFF_RUNNING) != 0) {
    569 			/*
    570 			 * If interface is marked down and it is running, then
    571 			 * stop it.
    572 			 */
    573 			epic_stop(sc, 1);
    574 		} else if ((ifp->if_flags & IFF_UP) != 0 &&
    575 			   (ifp->if_flags & IFF_RUNNING) == 0) {
    576 			/*
    577 			 * If interfase it marked up and it is stopped, then
    578 			 * start it.
    579 			 */
    580 			error = epic_init(sc);
    581 		} else if ((ifp->if_flags & IFF_UP) != 0) {
    582 			/*
    583 			 * Reset the interface to pick up changes in any other
    584 			 * flags that affect the hardware state.
    585 			 */
    586 			error = epic_init(sc);
    587 		}
    588 		break;
    589 
    590 	case SIOCADDMULTI:
    591 	case SIOCDELMULTI:
    592 		error = (cmd == SIOCADDMULTI) ?
    593 		    ether_addmulti(ifr, &sc->sc_ethercom) :
    594 		    ether_delmulti(ifr, &sc->sc_ethercom);
    595 
    596 		if (error == ENETRESET) {
    597 			/*
    598 			 * Multicast list has changed; set the hardware filter
    599 			 * accordingly.  Update our idea of the current media;
    600 			 * epic_set_mchash() needs to know what it is.
    601 			 */
    602 			mii_pollstat(&sc->sc_mii);
    603 			epic_set_mchash(sc);
    604 			error = 0;
    605 		}
    606 		break;
    607 
    608 	case SIOCSIFMEDIA:
    609 	case SIOCGIFMEDIA:
    610 		error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
    611 		break;
    612 
    613 	default:
    614 		error = EINVAL;
    615 		break;
    616 	}
    617 
    618 	splx(s);
    619 	return (error);
    620 }
    621 
    622 /*
    623  * Interrupt handler.
    624  */
    625 int
    626 epic_intr(arg)
    627 	void *arg;
    628 {
    629 	struct epic_softc *sc = arg;
    630 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
    631 	struct ether_header *eh;
    632 	struct epic_rxdesc *rxd;
    633 	struct epic_txdesc *txd;
    634 	struct epic_descsoft *ds;
    635 	struct mbuf *m;
    636 	u_int32_t intstat;
    637 	int i, len, claimed = 0;
    638 
    639  top:
    640 	/*
    641 	 * Get the interrupt status from the EPIC.
    642 	 */
    643 	intstat = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_INTSTAT);
    644 	if ((intstat & INTSTAT_INT_ACTV) == 0)
    645 		return (claimed);
    646 
    647 	claimed = 1;
    648 
    649 	/*
    650 	 * Acknowledge the interrupt.
    651 	 */
    652 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_INTSTAT,
    653 	    intstat & INTMASK);
    654 
    655 	/*
    656 	 * Check for receive interrupts.
    657 	 */
    658 	if (intstat & (INTSTAT_RCC | INTSTAT_RXE | INTSTAT_RQE)) {
    659 		for (i = sc->sc_rxptr;; i = EPIC_NEXTRX(i)) {
    660 			rxd = EPIC_CDRX(sc, i);
    661 			ds = EPIC_DSRX(sc, i);
    662 
    663 			EPIC_CDRXSYNC(sc, i,
    664 			    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
    665 
    666 			if (rxd->er_rxstatus & ER_RXSTAT_OWNER) {
    667 				/*
    668 				 * We have processed all of the
    669 				 * receive buffers.
    670 				 */
    671 				break;
    672 			}
    673 
    674 			/*
    675 			 * Make sure the packet arrived intact.  If an error
    676 			 * occurred, update stats and reset the descriptor.
    677 			 * The buffer will be reused the next time the
    678 			 * descriptor comes up in the ring.
    679 			 */
    680 			if ((rxd->er_rxstatus & ER_RXSTAT_PKTINTACT) == 0) {
    681 				if (rxd->er_rxstatus & ER_RXSTAT_CRCERROR)
    682 					printf("%s: CRC error\n",
    683 					    sc->sc_dev.dv_xname);
    684 				if (rxd->er_rxstatus & ER_RXSTAT_ALIGNERROR)
    685 					printf("%s: alignment error\n",
    686 					    sc->sc_dev.dv_xname);
    687 				ifp->if_ierrors++;
    688 				EPIC_INIT_RXDESC(sc, i);
    689 				continue;
    690 			}
    691 
    692 			bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
    693 			    ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
    694 
    695 			/*
    696 			 * The EPIC includes the CRC with every packet;
    697 			 * trim it.
    698 			 */
    699 			len = rxd->er_rxlength - ETHER_CRC_LEN;
    700 
    701 			if (len < sizeof(struct ether_header)) {
    702 				/*
    703 				 * Runt packet; drop it now.
    704 				 */
    705 				ifp->if_ierrors++;
    706 				EPIC_INIT_RXDESC(sc, i);
    707 				bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
    708 				    ds->ds_dmamap->dm_mapsize,
    709 				    BUS_DMASYNC_PREREAD);
    710 				continue;
    711 			}
    712 
    713 			/*
    714 			 * If the packet is small enough to fit in a
    715 			 * single header mbuf, allocate one and copy
    716 			 * the data into it.  This greatly reduces
    717 			 * memory consumption when we receive lots
    718 			 * of small packets.
    719 			 *
    720 			 * Otherwise, we add a new buffer to the receive
    721 			 * chain.  If this fails, we drop the packet and
    722 			 * recycle the old buffer.
    723 			 */
    724 			if (epic_copy_small != 0 && len <= MHLEN) {
    725 				MGETHDR(m, M_DONTWAIT, MT_DATA);
    726 				if (m == NULL)
    727 					goto dropit;
    728 				memcpy(mtod(m, caddr_t),
    729 				    mtod(ds->ds_mbuf, caddr_t), len);
    730 				EPIC_INIT_RXDESC(sc, i);
    731 				bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
    732 				    ds->ds_dmamap->dm_mapsize,
    733 				    BUS_DMASYNC_PREREAD);
    734 			} else {
    735 				m = ds->ds_mbuf;
    736 				if (epic_add_rxbuf(sc, i) != 0) {
    737  dropit:
    738 					ifp->if_ierrors++;
    739 					EPIC_INIT_RXDESC(sc, i);
    740 					bus_dmamap_sync(sc->sc_dmat,
    741 					    ds->ds_dmamap, 0,
    742 					    ds->ds_dmamap->dm_mapsize,
    743 					    BUS_DMASYNC_PREREAD);
    744 					continue;
    745 				}
    746 			}
    747 
    748 			m->m_pkthdr.rcvif = ifp;
    749 			m->m_pkthdr.len = m->m_len = len;
    750 			eh = mtod(m, struct ether_header *);
    751 
    752 #if NBPFILTER > 0
    753 			/*
    754 			 * Pass this up to any BPF listeners, but only
    755 			 * pass it up the stack if its for us.
    756 			 */
    757 			if (ifp->if_bpf) {
    758 				bpf_mtap(ifp->if_bpf, m);
    759 				if ((ifp->if_flags & IFF_PROMISC) != 0 &&
    760 				    memcmp(LLADDR(ifp->if_sadl),
    761 				           eh->ether_dhost,
    762 				           ETHER_ADDR_LEN) != 0 &&
    763 				    ETHER_IS_MULTICAST(eh->ether_dhost) == 0) {
    764 					m_freem(m);
    765 					continue;
    766 				}
    767 			}
    768 #endif /* NPBFILTER > 0 */
    769 
    770 			/* Pass it on. */
    771 			(*ifp->if_input)(ifp, m);
    772 			ifp->if_ipackets++;
    773 		}
    774 
    775 		/* Update the recieve pointer. */
    776 		sc->sc_rxptr = i;
    777 
    778 		/*
    779 		 * Check for receive queue underflow.
    780 		 */
    781 		if (intstat & INTSTAT_RQE) {
    782 			printf("%s: receiver queue empty\n",
    783 			    sc->sc_dev.dv_xname);
    784 			/*
    785 			 * Ring is already built; just restart the
    786 			 * receiver.
    787 			 */
    788 			bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_PRCDAR,
    789 			    EPIC_CDRXADDR(sc, sc->sc_rxptr));
    790 			bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_COMMAND,
    791 			    COMMAND_RXQUEUED | COMMAND_START_RX);
    792 		}
    793 	}
    794 
    795 	/*
    796 	 * Check for transmission complete interrupts.
    797 	 */
    798 	if (intstat & (INTSTAT_TXC | INTSTAT_TXU)) {
    799 		ifp->if_flags &= ~IFF_OACTIVE;
    800 		for (i = sc->sc_txdirty; sc->sc_txpending != 0;
    801 		     i = EPIC_NEXTTX(i), sc->sc_txpending--) {
    802 			txd = EPIC_CDTX(sc, i);
    803 			ds = EPIC_DSTX(sc, i);
    804 
    805 			EPIC_CDTXSYNC(sc, i,
    806 			    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
    807 
    808 			if (txd->et_txstatus & ET_TXSTAT_OWNER)
    809 				break;
    810 
    811 			EPIC_CDFLSYNC(sc, i, BUS_DMASYNC_POSTWRITE);
    812 
    813 			bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap,
    814 			    0, ds->ds_dmamap->dm_mapsize,
    815 			    BUS_DMASYNC_POSTWRITE);
    816 			bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
    817 			m_freem(ds->ds_mbuf);
    818 			ds->ds_mbuf = NULL;
    819 
    820 			/*
    821 			 * Check for errors and collisions.
    822 			 */
    823 			if ((txd->et_txstatus & ET_TXSTAT_PACKETTX) == 0)
    824 				ifp->if_oerrors++;
    825 			else
    826 				ifp->if_opackets++;
    827 			ifp->if_collisions +=
    828 			    TXSTAT_COLLISIONS(txd->et_txstatus);
    829 			if (txd->et_txstatus & ET_TXSTAT_CARSENSELOST)
    830 				printf("%s: lost carrier\n",
    831 				    sc->sc_dev.dv_xname);
    832 		}
    833 
    834 		/* Update the dirty transmit buffer pointer. */
    835 		sc->sc_txdirty = i;
    836 
    837 		/*
    838 		 * Cancel the watchdog timer if there are no pending
    839 		 * transmissions.
    840 		 */
    841 		if (sc->sc_txpending == 0)
    842 			ifp->if_timer = 0;
    843 
    844 		/*
    845 		 * Kick the transmitter after a DMA underrun.
    846 		 */
    847 		if (intstat & INTSTAT_TXU) {
    848 			printf("%s: transmit underrun\n", sc->sc_dev.dv_xname);
    849 			bus_space_write_4(sc->sc_st, sc->sc_sh,
    850 			    EPIC_COMMAND, COMMAND_TXUGO);
    851 			if (sc->sc_txpending)
    852 				bus_space_write_4(sc->sc_st, sc->sc_sh,
    853 				    EPIC_COMMAND, COMMAND_TXQUEUED);
    854 		}
    855 
    856 		/*
    857 		 * Try to get more packets going.
    858 		 */
    859 		epic_start(ifp);
    860 	}
    861 
    862 	/*
    863 	 * Check for fatal interrupts.
    864 	 */
    865 	if (intstat & INTSTAT_FATAL_INT) {
    866 		if (intstat & INTSTAT_PTA)
    867 			printf("%s: PCI target abort error\n",
    868 			    sc->sc_dev.dv_xname);
    869 		else if (intstat & INTSTAT_PMA)
    870 			printf("%s: PCI master abort error\n",
    871 			    sc->sc_dev.dv_xname);
    872 		else if (intstat & INTSTAT_APE)
    873 			printf("%s: PCI address parity error\n",
    874 			    sc->sc_dev.dv_xname);
    875 		else if (intstat & INTSTAT_DPE)
    876 			printf("%s: PCI data parity error\n",
    877 			    sc->sc_dev.dv_xname);
    878 		else
    879 			printf("%s: unknown fatal error\n",
    880 			    sc->sc_dev.dv_xname);
    881 		(void) epic_init(sc);
    882 	}
    883 
    884 	/*
    885 	 * Check for more interrupts.
    886 	 */
    887 	goto top;
    888 }
    889 
    890 /*
    891  * One second timer, used to tick the MII.
    892  */
    893 void
    894 epic_tick(arg)
    895 	void *arg;
    896 {
    897 	struct epic_softc *sc = arg;
    898 	int s;
    899 
    900 	s = splnet();
    901 	mii_tick(&sc->sc_mii);
    902 	splx(s);
    903 
    904 	callout_reset(&sc->sc_mii_callout, hz, epic_tick, sc);
    905 }
    906 
    907 /*
    908  * Fixup the clock source on the EPIC.
    909  */
    910 void
    911 epic_fixup_clock_source(sc)
    912 	struct epic_softc *sc;
    913 {
    914 	int i;
    915 
    916 	/*
    917 	 * According to SMC Application Note 7-15, the EPIC's clock
    918 	 * source is incorrect following a reset.  This manifests itself
    919 	 * as failure to recognize when host software has written to
    920 	 * a register on the EPIC.  The appnote recommends issuing at
    921 	 * least 16 consecutive writes to the CLOCK TEST bit to correctly
    922 	 * configure the clock source.
    923 	 */
    924 	for (i = 0; i < 16; i++)
    925 		bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_TEST,
    926 		    TEST_CLOCKTEST);
    927 }
    928 
    929 /*
    930  * Perform a soft reset on the EPIC.
    931  */
    932 void
    933 epic_reset(sc)
    934 	struct epic_softc *sc;
    935 {
    936 
    937 	epic_fixup_clock_source(sc);
    938 
    939 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_GENCTL, 0);
    940 	delay(100);
    941 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_GENCTL, GENCTL_SOFTRESET);
    942 	delay(100);
    943 
    944 	epic_fixup_clock_source(sc);
    945 }
    946 
    947 /*
    948  * Initialize the interface.  Must be called at splnet().
    949  */
    950 int
    951 epic_init(sc)
    952 	struct epic_softc *sc;
    953 {
    954 	bus_space_tag_t st = sc->sc_st;
    955 	bus_space_handle_t sh = sc->sc_sh;
    956 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
    957 	u_int8_t *enaddr = LLADDR(ifp->if_sadl);
    958 	struct epic_txdesc *txd;
    959 	struct epic_descsoft *ds;
    960 	u_int32_t genctl, reg0;
    961 	int i, error = 0;
    962 
    963 	/*
    964 	 * Cancel any pending I/O.
    965 	 */
    966 	epic_stop(sc, 0);
    967 
    968 	/*
    969 	 * Reset the EPIC to a known state.
    970 	 */
    971 	epic_reset(sc);
    972 
    973 	/*
    974 	 * Magical mystery initialization.
    975 	 */
    976 	bus_space_write_4(st, sh, EPIC_TXTEST, 0);
    977 
    978 	/*
    979 	 * Initialize the EPIC genctl register:
    980 	 *
    981 	 *	- 64 byte receive FIFO threshold
    982 	 *	- automatic advance to next receive frame
    983 	 */
    984 	genctl = GENCTL_RX_FIFO_THRESH0 | GENCTL_ONECOPY;
    985 #if BYTE_ORDER == BIG_ENDIAN
    986 	genctl |= GENCTL_BIG_ENDIAN;
    987 #endif
    988 	bus_space_write_4(st, sh, EPIC_GENCTL, genctl);
    989 
    990 	/*
    991 	 * Reset the MII bus and PHY.
    992 	 */
    993 	reg0 = bus_space_read_4(st, sh, EPIC_NVCTL);
    994 	bus_space_write_4(st, sh, EPIC_NVCTL, reg0 | NVCTL_GPIO1 | NVCTL_GPOE1);
    995 	bus_space_write_4(st, sh, EPIC_MIICFG, MIICFG_ENASER);
    996 	bus_space_write_4(st, sh, EPIC_GENCTL, genctl | GENCTL_RESET_PHY);
    997 	delay(100);
    998 	bus_space_write_4(st, sh, EPIC_GENCTL, genctl);
    999 	delay(100);
   1000 	bus_space_write_4(st, sh, EPIC_NVCTL, reg0);
   1001 
   1002 	/*
   1003 	 * Initialize Ethernet address.
   1004 	 */
   1005 	reg0 = enaddr[1] << 8 | enaddr[0];
   1006 	bus_space_write_4(st, sh, EPIC_LAN0, reg0);
   1007 	reg0 = enaddr[3] << 8 | enaddr[2];
   1008 	bus_space_write_4(st, sh, EPIC_LAN1, reg0);
   1009 	reg0 = enaddr[5] << 8 | enaddr[4];
   1010 	bus_space_write_4(st, sh, EPIC_LAN2, reg0);
   1011 
   1012 	/*
   1013 	 * Initialize receive control.  Remember the external buffer
   1014 	 * size setting.
   1015 	 */
   1016 	reg0 = bus_space_read_4(st, sh, EPIC_RXCON) &
   1017 	    (RXCON_EXTBUFSIZESEL1 | RXCON_EXTBUFSIZESEL0);
   1018 	reg0 |= (RXCON_RXMULTICAST | RXCON_RXBROADCAST);
   1019 	if (ifp->if_flags & IFF_PROMISC)
   1020 		reg0 |= RXCON_PROMISCMODE;
   1021 	bus_space_write_4(st, sh, EPIC_RXCON, reg0);
   1022 
   1023 	/* Set the current media. */
   1024 	mii_mediachg(&sc->sc_mii);
   1025 
   1026 	/* Set up the multicast hash table. */
   1027 	epic_set_mchash(sc);
   1028 
   1029 	/*
   1030 	 * Initialize the transmit descriptor ring.  txlast is initialized
   1031 	 * to the end of the list so that it will wrap around to the first
   1032 	 * descriptor when the first packet is transmitted.
   1033 	 */
   1034 	for (i = 0; i < EPIC_NTXDESC; i++) {
   1035 		txd = EPIC_CDTX(sc, i);
   1036 		memset(txd, 0, sizeof(struct epic_txdesc));
   1037 		txd->et_bufaddr = EPIC_CDFLADDR(sc, i);
   1038 		txd->et_nextdesc = EPIC_CDTXADDR(sc, EPIC_NEXTTX(i));
   1039 		EPIC_CDTXSYNC(sc, i, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
   1040 	}
   1041 	sc->sc_txpending = 0;
   1042 	sc->sc_txdirty = 0;
   1043 	sc->sc_txlast = EPIC_NTXDESC - 1;
   1044 
   1045 	/*
   1046 	 * Initialize the receive descriptor ring.
   1047 	 */
   1048 	for (i = 0; i < EPIC_NRXDESC; i++) {
   1049 		ds = EPIC_DSRX(sc, i);
   1050 		if (ds->ds_mbuf == NULL) {
   1051 			if ((error = epic_add_rxbuf(sc, i)) != 0) {
   1052 				printf("%s: unable to allocate or map rx "
   1053 				    "buffer %d error = %d\n",
   1054 				    sc->sc_dev.dv_xname, i, error);
   1055 				/*
   1056 				 * XXX Should attempt to run with fewer receive
   1057 				 * XXX buffers instead of just failing.
   1058 				 */
   1059 				epic_rxdrain(sc);
   1060 				goto out;
   1061 			}
   1062 		}
   1063 	}
   1064 	sc->sc_rxptr = 0;
   1065 
   1066 	/*
   1067 	 * Initialize the interrupt mask and enable interrupts.
   1068 	 */
   1069 	bus_space_write_4(st, sh, EPIC_INTMASK, INTMASK);
   1070 	bus_space_write_4(st, sh, EPIC_GENCTL, genctl | GENCTL_INTENA);
   1071 
   1072 	/*
   1073 	 * Give the transmit and receive rings to the EPIC.
   1074 	 */
   1075 	bus_space_write_4(st, sh, EPIC_PTCDAR,
   1076 	    EPIC_CDTXADDR(sc, EPIC_NEXTTX(sc->sc_txlast)));
   1077 	bus_space_write_4(st, sh, EPIC_PRCDAR,
   1078 	    EPIC_CDRXADDR(sc, sc->sc_rxptr));
   1079 
   1080 	/*
   1081 	 * Set the EPIC in motion.
   1082 	 */
   1083 	bus_space_write_4(st, sh, EPIC_COMMAND,
   1084 	    COMMAND_RXQUEUED | COMMAND_START_RX);
   1085 
   1086 	/*
   1087 	 * ...all done!
   1088 	 */
   1089 	ifp->if_flags |= IFF_RUNNING;
   1090 	ifp->if_flags &= ~IFF_OACTIVE;
   1091 
   1092 	/*
   1093 	 * Start the one second clock.
   1094 	 */
   1095 	callout_reset(&sc->sc_mii_callout, hz, epic_tick, sc);
   1096 
   1097 	/*
   1098 	 * Attempt to start output on the interface.
   1099 	 */
   1100 	epic_start(ifp);
   1101 
   1102  out:
   1103 	if (error)
   1104 		printf("%s: interface not running\n", sc->sc_dev.dv_xname);
   1105 	return (error);
   1106 }
   1107 
   1108 /*
   1109  * Drain the receive queue.
   1110  */
   1111 void
   1112 epic_rxdrain(sc)
   1113 	struct epic_softc *sc;
   1114 {
   1115 	struct epic_descsoft *ds;
   1116 	int i;
   1117 
   1118 	for (i = 0; i < EPIC_NRXDESC; i++) {
   1119 		ds = EPIC_DSRX(sc, i);
   1120 		if (ds->ds_mbuf != NULL) {
   1121 			bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
   1122 			m_freem(ds->ds_mbuf);
   1123 			ds->ds_mbuf = NULL;
   1124 		}
   1125 	}
   1126 }
   1127 
   1128 /*
   1129  * Stop transmission on the interface.
   1130  */
   1131 void
   1132 epic_stop(sc, drain)
   1133 	struct epic_softc *sc;
   1134 	int drain;
   1135 {
   1136 	bus_space_tag_t st = sc->sc_st;
   1137 	bus_space_handle_t sh = sc->sc_sh;
   1138 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
   1139 	struct epic_descsoft *ds;
   1140 	u_int32_t reg;
   1141 	int i;
   1142 
   1143 	/*
   1144 	 * Stop the one second clock.
   1145 	 */
   1146 	callout_stop(&sc->sc_mii_callout);
   1147 
   1148 	/* Down the MII. */
   1149 	mii_down(&sc->sc_mii);
   1150 
   1151 	/* Paranoia... */
   1152 	epic_fixup_clock_source(sc);
   1153 
   1154 	/*
   1155 	 * Disable interrupts.
   1156 	 */
   1157 	reg = bus_space_read_4(st, sh, EPIC_GENCTL);
   1158 	bus_space_write_4(st, sh, EPIC_GENCTL, reg & ~GENCTL_INTENA);
   1159 	bus_space_write_4(st, sh, EPIC_INTMASK, 0);
   1160 
   1161 	/*
   1162 	 * Stop the DMA engine and take the receiver off-line.
   1163 	 */
   1164 	bus_space_write_4(st, sh, EPIC_COMMAND, COMMAND_STOP_RDMA |
   1165 	    COMMAND_STOP_TDMA | COMMAND_STOP_RX);
   1166 
   1167 	/*
   1168 	 * Release any queued transmit buffers.
   1169 	 */
   1170 	for (i = 0; i < EPIC_NTXDESC; i++) {
   1171 		ds = EPIC_DSTX(sc, i);
   1172 		if (ds->ds_mbuf != NULL) {
   1173 			bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
   1174 			m_freem(ds->ds_mbuf);
   1175 			ds->ds_mbuf = NULL;
   1176 		}
   1177 	}
   1178 
   1179 	if (drain) {
   1180 		/*
   1181 		 * Release the receive buffers.
   1182 		 */
   1183 		epic_rxdrain(sc);
   1184 	}
   1185 
   1186 	/*
   1187 	 * Mark the interface down and cancel the watchdog timer.
   1188 	 */
   1189 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
   1190 	ifp->if_timer = 0;
   1191 }
   1192 
   1193 /*
   1194  * Read the EPIC Serial EEPROM.
   1195  */
   1196 void
   1197 epic_read_eeprom(sc, word, wordcnt, data)
   1198 	struct epic_softc *sc;
   1199 	int word, wordcnt;
   1200 	u_int16_t *data;
   1201 {
   1202 	bus_space_tag_t st = sc->sc_st;
   1203 	bus_space_handle_t sh = sc->sc_sh;
   1204 	u_int16_t reg;
   1205 	int i, x;
   1206 
   1207 #define	EEPROM_WAIT_READY(st, sh) \
   1208 	while ((bus_space_read_4((st), (sh), EPIC_EECTL) & EECTL_EERDY) == 0) \
   1209 		/* nothing */
   1210 
   1211 	/*
   1212 	 * Enable the EEPROM.
   1213 	 */
   1214 	bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE);
   1215 	EEPROM_WAIT_READY(st, sh);
   1216 
   1217 	for (i = 0; i < wordcnt; i++) {
   1218 		/* Send CHIP SELECT for one clock tick. */
   1219 		bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE|EECTL_EECS);
   1220 		EEPROM_WAIT_READY(st, sh);
   1221 
   1222 		/* Shift in the READ opcode. */
   1223 		for (x = 3; x > 0; x--) {
   1224 			reg = EECTL_ENABLE|EECTL_EECS;
   1225 			if (EPIC_EEPROM_OPC_READ & (1 << (x - 1)))
   1226 				reg |= EECTL_EEDI;
   1227 			bus_space_write_4(st, sh, EPIC_EECTL, reg);
   1228 			EEPROM_WAIT_READY(st, sh);
   1229 			bus_space_write_4(st, sh, EPIC_EECTL, reg|EECTL_EESK);
   1230 			EEPROM_WAIT_READY(st, sh);
   1231 			bus_space_write_4(st, sh, EPIC_EECTL, reg);
   1232 			EEPROM_WAIT_READY(st, sh);
   1233 		}
   1234 
   1235 		/* Shift in address. */
   1236 		for (x = 6; x > 0; x--) {
   1237 			reg = EECTL_ENABLE|EECTL_EECS;
   1238 			if ((word + i) & (1 << (x - 1)))
   1239 				reg |= EECTL_EEDI;
   1240 			bus_space_write_4(st, sh, EPIC_EECTL, reg);
   1241 			EEPROM_WAIT_READY(st, sh);
   1242 			bus_space_write_4(st, sh, EPIC_EECTL, reg|EECTL_EESK);
   1243 			EEPROM_WAIT_READY(st, sh);
   1244 			bus_space_write_4(st, sh, EPIC_EECTL, reg);
   1245 			EEPROM_WAIT_READY(st, sh);
   1246 		}
   1247 
   1248 		/* Shift out data. */
   1249 		reg = EECTL_ENABLE|EECTL_EECS;
   1250 		data[i] = 0;
   1251 		for (x = 16; x > 0; x--) {
   1252 			bus_space_write_4(st, sh, EPIC_EECTL, reg|EECTL_EESK);
   1253 			EEPROM_WAIT_READY(st, sh);
   1254 			if (bus_space_read_4(st, sh, EPIC_EECTL) & EECTL_EEDO)
   1255 				data[i] |= (1 << (x - 1));
   1256 			bus_space_write_4(st, sh, EPIC_EECTL, reg);
   1257 			EEPROM_WAIT_READY(st, sh);
   1258 		}
   1259 
   1260 		/* Clear CHIP SELECT. */
   1261 		bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE);
   1262 		EEPROM_WAIT_READY(st, sh);
   1263 	}
   1264 
   1265 	/*
   1266 	 * Disable the EEPROM.
   1267 	 */
   1268 	bus_space_write_4(st, sh, EPIC_EECTL, 0);
   1269 
   1270 #undef EEPROM_WAIT_READY
   1271 }
   1272 
   1273 /*
   1274  * Add a receive buffer to the indicated descriptor.
   1275  */
   1276 int
   1277 epic_add_rxbuf(sc, idx)
   1278 	struct epic_softc *sc;
   1279 	int idx;
   1280 {
   1281 	struct epic_descsoft *ds = EPIC_DSRX(sc, idx);
   1282 	struct mbuf *m;
   1283 	int error;
   1284 
   1285 	MGETHDR(m, M_DONTWAIT, MT_DATA);
   1286 	if (m == NULL)
   1287 		return (ENOBUFS);
   1288 
   1289 	MCLGET(m, M_DONTWAIT);
   1290 	if ((m->m_flags & M_EXT) == 0) {
   1291 		m_freem(m);
   1292 		return (ENOBUFS);
   1293 	}
   1294 
   1295 	if (ds->ds_mbuf != NULL)
   1296 		bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
   1297 
   1298 	ds->ds_mbuf = m;
   1299 
   1300 	error = bus_dmamap_load(sc->sc_dmat, ds->ds_dmamap,
   1301 	    m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT);
   1302 	if (error) {
   1303 		printf("%s: can't load rx DMA map %d, error = %d\n",
   1304 		    sc->sc_dev.dv_xname, idx, error);
   1305 		panic("epic_add_rxbuf");	/* XXX */
   1306 	}
   1307 
   1308 	bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
   1309 	    ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
   1310 
   1311 	EPIC_INIT_RXDESC(sc, idx);
   1312 
   1313 	return (0);
   1314 }
   1315 
   1316 /*
   1317  * Set the EPIC multicast hash table.
   1318  *
   1319  * NOTE: We rely on a recently-updated mii_media_active here!
   1320  */
   1321 void
   1322 epic_set_mchash(sc)
   1323 	struct epic_softc *sc;
   1324 {
   1325 	struct ethercom *ec = &sc->sc_ethercom;
   1326 	struct ifnet *ifp = &sc->sc_ethercom.ec_if;
   1327 	struct ether_multi *enm;
   1328 	struct ether_multistep step;
   1329 	u_int32_t hash, mchash[4];
   1330 
   1331 	/*
   1332 	 * Set up the multicast address filter by passing all multicast
   1333 	 * addresses through a CRC generator, and then using the low-order
   1334 	 * 6 bits as an index into the 64 bit multicast hash table (only
   1335 	 * the lower 16 bits of each 32 bit multicast hash register are
   1336 	 * valid).  The high order bits select the register, while the
   1337 	 * rest of the bits select the bit within the register.
   1338 	 */
   1339 
   1340 	if (ifp->if_flags & IFF_PROMISC)
   1341 		goto allmulti;
   1342 
   1343 	if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T) {
   1344 		/* XXX hardware bug in 10Mbps mode. */
   1345 		goto allmulti;
   1346 	}
   1347 
   1348 	mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0;
   1349 
   1350 	ETHER_FIRST_MULTI(step, ec, enm);
   1351 	while (enm != NULL) {
   1352 		if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
   1353 			/*
   1354 			 * We must listen to a range of multicast addresses.
   1355 			 * For now, just accept all multicasts, rather than
   1356 			 * trying to set only those filter bits needed to match
   1357 			 * the range.  (At this time, the only use of address
   1358 			 * ranges is for IP multicast routing, for which the
   1359 			 * range is big enough to require all bits set.)
   1360 			 */
   1361 			goto allmulti;
   1362 		}
   1363 
   1364 		hash = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN);
   1365 		hash >>= 26;
   1366 
   1367 		/* Set the corresponding bit in the hash table. */
   1368 		mchash[hash >> 4] |= 1 << (hash & 0xf);
   1369 
   1370 		ETHER_NEXT_MULTI(step, enm);
   1371 	}
   1372 
   1373 	ifp->if_flags &= ~IFF_ALLMULTI;
   1374 	goto sethash;
   1375 
   1376  allmulti:
   1377 	ifp->if_flags |= IFF_ALLMULTI;
   1378 	mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0xffff;
   1379 
   1380  sethash:
   1381 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC0, mchash[0]);
   1382 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC1, mchash[1]);
   1383 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC2, mchash[2]);
   1384 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC3, mchash[3]);
   1385 }
   1386 
   1387 /*
   1388  * Wait for the MII to become ready.
   1389  */
   1390 int
   1391 epic_mii_wait(sc, rw)
   1392 	struct epic_softc *sc;
   1393 	u_int32_t rw;
   1394 {
   1395 	int i;
   1396 
   1397 	for (i = 0; i < 50; i++) {
   1398 		if ((bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL) & rw)
   1399 		    == 0)
   1400 			break;
   1401 		delay(2);
   1402 	}
   1403 	if (i == 50) {
   1404 		printf("%s: MII timed out\n", sc->sc_dev.dv_xname);
   1405 		return (1);
   1406 	}
   1407 
   1408 	return (0);
   1409 }
   1410 
   1411 /*
   1412  * Read from the MII.
   1413  */
   1414 int
   1415 epic_mii_read(self, phy, reg)
   1416 	struct device *self;
   1417 	int phy, reg;
   1418 {
   1419 	struct epic_softc *sc = (struct epic_softc *)self;
   1420 
   1421 	if (epic_mii_wait(sc, MMCTL_WRITE))
   1422 		return (0);
   1423 
   1424 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL,
   1425 	    MMCTL_ARG(phy, reg, MMCTL_READ));
   1426 
   1427 	if (epic_mii_wait(sc, MMCTL_READ))
   1428 		return (0);
   1429 
   1430 	return (bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MMDATA) &
   1431 	    MMDATA_MASK);
   1432 }
   1433 
   1434 /*
   1435  * Write to the MII.
   1436  */
   1437 void
   1438 epic_mii_write(self, phy, reg, val)
   1439 	struct device *self;
   1440 	int phy, reg, val;
   1441 {
   1442 	struct epic_softc *sc = (struct epic_softc *)self;
   1443 
   1444 	if (epic_mii_wait(sc, MMCTL_WRITE))
   1445 		return;
   1446 
   1447 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMDATA, val);
   1448 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL,
   1449 	    MMCTL_ARG(phy, reg, MMCTL_WRITE));
   1450 }
   1451 
   1452 /*
   1453  * Callback from PHY when media changes.
   1454  */
   1455 void
   1456 epic_statchg(self)
   1457 	struct device *self;
   1458 {
   1459 	struct epic_softc *sc = (struct epic_softc *)self;
   1460 	u_int32_t txcon;
   1461 
   1462 	/*
   1463 	 * Update loopback bits in TXCON to reflect duplex mode.
   1464 	 */
   1465 	txcon = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_TXCON);
   1466 	if (sc->sc_mii.mii_media_active & IFM_FDX)
   1467 		txcon |= (TXCON_LOOPBACK_D1|TXCON_LOOPBACK_D2);
   1468 	else
   1469 		txcon &= ~(TXCON_LOOPBACK_D1|TXCON_LOOPBACK_D2);
   1470 	bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_TXCON, txcon);
   1471 
   1472 	/*
   1473 	 * There is a multicast filter bug in 10Mbps mode.  Kick the
   1474 	 * multicast filter in case the speed changed.
   1475 	 */
   1476 	epic_set_mchash(sc);
   1477 }
   1478 
   1479 /*
   1480  * Callback from ifmedia to request current media status.
   1481  */
   1482 void
   1483 epic_mediastatus(ifp, ifmr)
   1484 	struct ifnet *ifp;
   1485 	struct ifmediareq *ifmr;
   1486 {
   1487 	struct epic_softc *sc = ifp->if_softc;
   1488 
   1489 	mii_pollstat(&sc->sc_mii);
   1490 	ifmr->ifm_status = sc->sc_mii.mii_media_status;
   1491 	ifmr->ifm_active = sc->sc_mii.mii_media_active;
   1492 }
   1493 
   1494 /*
   1495  * Callback from ifmedia to request new media setting.
   1496  */
   1497 int
   1498 epic_mediachange(ifp)
   1499 	struct ifnet *ifp;
   1500 {
   1501 	struct epic_softc *sc = ifp->if_softc;
   1502 
   1503 	if (ifp->if_flags & IFF_UP)
   1504 		mii_mediachg(&sc->sc_mii);
   1505 	return (0);
   1506 }
   1507