smc83c170.c revision 1.81.16.3
1 /* $NetBSD: smc83c170.c,v 1.81.16.3 2017/02/05 13:40:28 skrll Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Device driver for the Standard Microsystems Corp. 83C170 35 * Ethernet PCI Integrated Controller (EPIC/100). 36 */ 37 38 #include <sys/cdefs.h> 39 __KERNEL_RCSID(0, "$NetBSD: smc83c170.c,v 1.81.16.3 2017/02/05 13:40:28 skrll Exp $"); 40 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/callout.h> 45 #include <sys/mbuf.h> 46 #include <sys/malloc.h> 47 #include <sys/kernel.h> 48 #include <sys/socket.h> 49 #include <sys/ioctl.h> 50 #include <sys/errno.h> 51 #include <sys/device.h> 52 53 #include <net/if.h> 54 #include <net/if_dl.h> 55 #include <net/if_media.h> 56 #include <net/if_ether.h> 57 58 #include <net/bpf.h> 59 60 #include <sys/bus.h> 61 #include <sys/intr.h> 62 63 #include <dev/mii/miivar.h> 64 #include <dev/mii/lxtphyreg.h> 65 66 #include <dev/ic/smc83c170reg.h> 67 #include <dev/ic/smc83c170var.h> 68 69 void epic_start(struct ifnet *); 70 void epic_watchdog(struct ifnet *); 71 int epic_ioctl(struct ifnet *, u_long, void *); 72 int epic_init(struct ifnet *); 73 void epic_stop(struct ifnet *, int); 74 75 bool epic_shutdown(device_t, int); 76 77 void epic_reset(struct epic_softc *); 78 void epic_rxdrain(struct epic_softc *); 79 int epic_add_rxbuf(struct epic_softc *, int); 80 void epic_read_eeprom(struct epic_softc *, int, int, uint16_t *); 81 void epic_set_mchash(struct epic_softc *); 82 void epic_fixup_clock_source(struct epic_softc *); 83 int epic_mii_read(device_t, int, int); 84 void epic_mii_write(device_t, int, int, int); 85 int epic_mii_wait(struct epic_softc *, uint32_t); 86 void epic_tick(void *); 87 88 void epic_statchg(struct ifnet *); 89 int epic_mediachange(struct ifnet *); 90 91 #define INTMASK (INTSTAT_FATAL_INT | INTSTAT_TXU | \ 92 INTSTAT_TXC | INTSTAT_RXE | INTSTAT_RQE | INTSTAT_RCC) 93 94 int epic_copy_small = 0; 95 96 #define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 97 98 /* 99 * Attach an EPIC interface to the system. 100 */ 101 void 102 epic_attach(struct epic_softc *sc) 103 { 104 bus_space_tag_t st = sc->sc_st; 105 bus_space_handle_t sh = sc->sc_sh; 106 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 107 int rseg, error, miiflags; 108 u_int i; 109 bus_dma_segment_t seg; 110 uint8_t enaddr[ETHER_ADDR_LEN], devname[12 + 1]; 111 uint16_t myea[ETHER_ADDR_LEN / 2], mydevname[6]; 112 char *nullbuf; 113 114 callout_init(&sc->sc_mii_callout, 0); 115 116 /* 117 * Allocate the control data structures, and create and load the 118 * DMA map for it. 119 */ 120 if ((error = bus_dmamem_alloc(sc->sc_dmat, 121 sizeof(struct epic_control_data) + ETHER_PAD_LEN, PAGE_SIZE, 0, 122 &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { 123 aprint_error_dev(sc->sc_dev, 124 "unable to allocate control data, error = %d\n", error); 125 goto fail_0; 126 } 127 128 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, 129 sizeof(struct epic_control_data) + ETHER_PAD_LEN, 130 (void **)&sc->sc_control_data, 131 BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { 132 aprint_error_dev(sc->sc_dev, 133 "unable to map control data, error = %d\n", error); 134 goto fail_1; 135 } 136 nullbuf = 137 (char *)sc->sc_control_data + sizeof(struct epic_control_data); 138 memset(nullbuf, 0, ETHER_PAD_LEN); 139 140 if ((error = bus_dmamap_create(sc->sc_dmat, 141 sizeof(struct epic_control_data), 1, 142 sizeof(struct epic_control_data), 0, BUS_DMA_NOWAIT, 143 &sc->sc_cddmamap)) != 0) { 144 aprint_error_dev(sc->sc_dev, 145 "unable to create control data DMA map, error = %d\n", 146 error); 147 goto fail_2; 148 } 149 150 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, 151 sc->sc_control_data, sizeof(struct epic_control_data), NULL, 152 BUS_DMA_NOWAIT)) != 0) { 153 aprint_error_dev(sc->sc_dev, 154 "unable to load control data DMA map, error = %d\n", 155 error); 156 goto fail_3; 157 } 158 159 /* 160 * Create the transmit buffer DMA maps. 161 */ 162 for (i = 0; i < EPIC_NTXDESC; i++) { 163 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 164 EPIC_NFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT, 165 &EPIC_DSTX(sc, i)->ds_dmamap)) != 0) { 166 aprint_error_dev(sc->sc_dev, 167 "unable to create tx DMA map %d, error = %d\n", 168 i, error); 169 goto fail_4; 170 } 171 } 172 173 /* 174 * Create the receive buffer DMA maps. 175 */ 176 for (i = 0; i < EPIC_NRXDESC; i++) { 177 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 178 MCLBYTES, 0, BUS_DMA_NOWAIT, 179 &EPIC_DSRX(sc, i)->ds_dmamap)) != 0) { 180 aprint_error_dev(sc->sc_dev, 181 "unable to create rx DMA map %d, error = %d\n", 182 i, error); 183 goto fail_5; 184 } 185 EPIC_DSRX(sc, i)->ds_mbuf = NULL; 186 } 187 188 /* 189 * create and map the pad buffer 190 */ 191 if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_PAD_LEN, 1, 192 ETHER_PAD_LEN, 0, BUS_DMA_NOWAIT,&sc->sc_nulldmamap)) != 0) { 193 aprint_error_dev(sc->sc_dev, 194 "unable to create pad buffer DMA map, error = %d\n", error); 195 goto fail_5; 196 } 197 198 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_nulldmamap, 199 nullbuf, ETHER_PAD_LEN, NULL, BUS_DMA_NOWAIT)) != 0) { 200 aprint_error_dev(sc->sc_dev, 201 "unable to load pad buffer DMA map, error = %d\n", error); 202 goto fail_6; 203 } 204 bus_dmamap_sync(sc->sc_dmat, sc->sc_nulldmamap, 0, ETHER_PAD_LEN, 205 BUS_DMASYNC_PREWRITE); 206 207 /* 208 * Bring the chip out of low-power mode and reset it to a known state. 209 */ 210 bus_space_write_4(st, sh, EPIC_GENCTL, 0); 211 epic_reset(sc); 212 213 /* 214 * Read the Ethernet address from the EEPROM. 215 */ 216 epic_read_eeprom(sc, 0, __arraycount(myea), myea); 217 for (i = 0; i < __arraycount(myea); i++) { 218 enaddr[i * 2] = myea[i] & 0xff; 219 enaddr[i * 2 + 1] = myea[i] >> 8; 220 } 221 222 /* 223 * ...and the device name. 224 */ 225 epic_read_eeprom(sc, 0x2c, __arraycount(mydevname), mydevname); 226 for (i = 0; i < __arraycount(mydevname); i++) { 227 devname[i * 2] = mydevname[i] & 0xff; 228 devname[i * 2 + 1] = mydevname[i] >> 8; 229 } 230 231 devname[sizeof(mydevname)] = '\0'; 232 for (i = sizeof(mydevname) ; i > 0; i--) { 233 if (devname[i - 1] == ' ') 234 devname[i - 1] = '\0'; 235 else 236 break; 237 } 238 239 aprint_normal_dev(sc->sc_dev, "%s, Ethernet address %s\n", 240 devname, ether_sprintf(enaddr)); 241 242 miiflags = 0; 243 if (sc->sc_hwflags & EPIC_HAS_MII_FIBER) 244 miiflags |= MIIF_HAVEFIBER; 245 246 /* 247 * Initialize our media structures and probe the MII. 248 */ 249 sc->sc_mii.mii_ifp = ifp; 250 sc->sc_mii.mii_readreg = epic_mii_read; 251 sc->sc_mii.mii_writereg = epic_mii_write; 252 sc->sc_mii.mii_statchg = epic_statchg; 253 254 sc->sc_ethercom.ec_mii = &sc->sc_mii; 255 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, epic_mediachange, 256 ether_mediastatus); 257 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, 258 MII_OFFSET_ANY, miiflags); 259 if (LIST_EMPTY(&sc->sc_mii.mii_phys)) { 260 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 261 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); 262 } else 263 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 264 265 if (sc->sc_hwflags & EPIC_HAS_BNC) { 266 /* use the next free media instance */ 267 sc->sc_serinst = sc->sc_mii.mii_instance++; 268 ifmedia_add(&sc->sc_mii.mii_media, 269 IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc->sc_serinst), 270 0, NULL); 271 aprint_normal_dev(sc->sc_dev, "10base2/BNC\n"); 272 } else 273 sc->sc_serinst = -1; 274 275 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 276 ifp->if_softc = sc; 277 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 278 ifp->if_ioctl = epic_ioctl; 279 ifp->if_start = epic_start; 280 ifp->if_watchdog = epic_watchdog; 281 ifp->if_init = epic_init; 282 ifp->if_stop = epic_stop; 283 IFQ_SET_READY(&ifp->if_snd); 284 285 /* 286 * We can support 802.1Q VLAN-sized frames. 287 */ 288 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 289 290 /* 291 * Attach the interface. 292 */ 293 if_attach(ifp); 294 ether_ifattach(ifp, enaddr); 295 296 /* 297 * Make sure the interface is shutdown during reboot. 298 */ 299 if (pmf_device_register1(sc->sc_dev, NULL, NULL, epic_shutdown)) 300 pmf_class_network_register(sc->sc_dev, ifp); 301 else 302 aprint_error_dev(sc->sc_dev, 303 "couldn't establish power handler\n"); 304 305 return; 306 307 /* 308 * Free any resources we've allocated during the failed attach 309 * attempt. Do this in reverse order and fall through. 310 */ 311 fail_6: 312 bus_dmamap_destroy(sc->sc_dmat, sc->sc_nulldmamap); 313 fail_5: 314 for (i = 0; i < EPIC_NRXDESC; i++) { 315 if (EPIC_DSRX(sc, i)->ds_dmamap != NULL) 316 bus_dmamap_destroy(sc->sc_dmat, 317 EPIC_DSRX(sc, i)->ds_dmamap); 318 } 319 fail_4: 320 for (i = 0; i < EPIC_NTXDESC; i++) { 321 if (EPIC_DSTX(sc, i)->ds_dmamap != NULL) 322 bus_dmamap_destroy(sc->sc_dmat, 323 EPIC_DSTX(sc, i)->ds_dmamap); 324 } 325 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 326 fail_3: 327 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 328 fail_2: 329 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 330 sizeof(struct epic_control_data)); 331 fail_1: 332 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 333 fail_0: 334 return; 335 } 336 337 /* 338 * Shutdown hook. Make sure the interface is stopped at reboot. 339 */ 340 bool 341 epic_shutdown(device_t self, int howto) 342 { 343 struct epic_softc *sc = device_private(self); 344 345 epic_stop(&sc->sc_ethercom.ec_if, 1); 346 347 return true; 348 } 349 350 /* 351 * Start packet transmission on the interface. 352 * [ifnet interface function] 353 */ 354 void 355 epic_start(struct ifnet *ifp) 356 { 357 struct epic_softc *sc = ifp->if_softc; 358 struct mbuf *m0, *m; 359 struct epic_txdesc *txd; 360 struct epic_descsoft *ds; 361 struct epic_fraglist *fr; 362 bus_dmamap_t dmamap; 363 int error, firsttx, nexttx, opending, seg; 364 u_int len; 365 366 /* 367 * Remember the previous txpending and the first transmit 368 * descriptor we use. 369 */ 370 opending = sc->sc_txpending; 371 firsttx = EPIC_NEXTTX(sc->sc_txlast); 372 373 /* 374 * Loop through the send queue, setting up transmit descriptors 375 * until we drain the queue, or use up all available transmit 376 * descriptors. 377 */ 378 while (sc->sc_txpending < EPIC_NTXDESC) { 379 /* 380 * Grab a packet off the queue. 381 */ 382 IFQ_POLL(&ifp->if_snd, m0); 383 if (m0 == NULL) 384 break; 385 m = NULL; 386 387 /* 388 * Get the last and next available transmit descriptor. 389 */ 390 nexttx = EPIC_NEXTTX(sc->sc_txlast); 391 txd = EPIC_CDTX(sc, nexttx); 392 fr = EPIC_CDFL(sc, nexttx); 393 ds = EPIC_DSTX(sc, nexttx); 394 dmamap = ds->ds_dmamap; 395 396 /* 397 * Load the DMA map. If this fails, the packet either 398 * didn't fit in the alloted number of frags, or we were 399 * short on resources. In this case, we'll copy and try 400 * again. 401 */ 402 if ((error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 403 BUS_DMA_WRITE|BUS_DMA_NOWAIT)) != 0 || 404 (m0->m_pkthdr.len < ETHER_PAD_LEN && 405 dmamap-> dm_nsegs == EPIC_NFRAGS)) { 406 if (error == 0) 407 bus_dmamap_unload(sc->sc_dmat, dmamap); 408 409 MGETHDR(m, M_DONTWAIT, MT_DATA); 410 if (m == NULL) { 411 printf("%s: unable to allocate Tx mbuf\n", 412 device_xname(sc->sc_dev)); 413 break; 414 } 415 if (m0->m_pkthdr.len > MHLEN) { 416 MCLGET(m, M_DONTWAIT); 417 if ((m->m_flags & M_EXT) == 0) { 418 printf("%s: unable to allocate Tx " 419 "cluster\n", 420 device_xname(sc->sc_dev)); 421 m_freem(m); 422 break; 423 } 424 } 425 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 426 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 427 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 428 m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); 429 if (error) { 430 printf("%s: unable to load Tx buffer, " 431 "error = %d\n", device_xname(sc->sc_dev), 432 error); 433 break; 434 } 435 } 436 IFQ_DEQUEUE(&ifp->if_snd, m0); 437 if (m != NULL) { 438 m_freem(m0); 439 m0 = m; 440 } 441 442 /* Initialize the fraglist. */ 443 for (seg = 0; seg < dmamap->dm_nsegs; seg++) { 444 fr->ef_frags[seg].ef_addr = 445 dmamap->dm_segs[seg].ds_addr; 446 fr->ef_frags[seg].ef_length = 447 dmamap->dm_segs[seg].ds_len; 448 } 449 len = m0->m_pkthdr.len; 450 if (len < ETHER_PAD_LEN) { 451 fr->ef_frags[seg].ef_addr = sc->sc_nulldma; 452 fr->ef_frags[seg].ef_length = ETHER_PAD_LEN - len; 453 len = ETHER_PAD_LEN; 454 seg++; 455 } 456 fr->ef_nfrags = seg; 457 458 EPIC_CDFLSYNC(sc, nexttx, BUS_DMASYNC_PREWRITE); 459 460 /* Sync the DMA map. */ 461 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 462 BUS_DMASYNC_PREWRITE); 463 464 /* 465 * Store a pointer to the packet so we can free it later. 466 */ 467 ds->ds_mbuf = m0; 468 469 /* 470 * Fill in the transmit descriptor. 471 */ 472 txd->et_control = ET_TXCTL_LASTDESC | ET_TXCTL_FRAGLIST; 473 474 /* 475 * If this is the first descriptor we're enqueueing, 476 * don't give it to the EPIC yet. That could cause 477 * a race condition. We'll do it below. 478 */ 479 if (nexttx == firsttx) 480 txd->et_txstatus = TXSTAT_TXLENGTH(len); 481 else 482 txd->et_txstatus = 483 TXSTAT_TXLENGTH(len) | ET_TXSTAT_OWNER; 484 485 EPIC_CDTXSYNC(sc, nexttx, 486 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 487 488 /* Advance the tx pointer. */ 489 sc->sc_txpending++; 490 sc->sc_txlast = nexttx; 491 492 /* 493 * Pass the packet to any BPF listeners. 494 */ 495 bpf_mtap(ifp, m0); 496 } 497 498 if (sc->sc_txpending == EPIC_NTXDESC) { 499 /* No more slots left; notify upper layer. */ 500 ifp->if_flags |= IFF_OACTIVE; 501 } 502 503 if (sc->sc_txpending != opending) { 504 /* 505 * We enqueued packets. If the transmitter was idle, 506 * reset the txdirty pointer. 507 */ 508 if (opending == 0) 509 sc->sc_txdirty = firsttx; 510 511 /* 512 * Cause a transmit interrupt to happen on the 513 * last packet we enqueued. 514 */ 515 EPIC_CDTX(sc, sc->sc_txlast)->et_control |= ET_TXCTL_IAF; 516 EPIC_CDTXSYNC(sc, sc->sc_txlast, 517 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 518 519 /* 520 * The entire packet chain is set up. Give the 521 * first descriptor to the EPIC now. 522 */ 523 EPIC_CDTX(sc, firsttx)->et_txstatus |= ET_TXSTAT_OWNER; 524 EPIC_CDTXSYNC(sc, firsttx, 525 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 526 527 /* Start the transmitter. */ 528 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_COMMAND, 529 COMMAND_TXQUEUED); 530 531 /* Set a watchdog timer in case the chip flakes out. */ 532 ifp->if_timer = 5; 533 } 534 } 535 536 /* 537 * Watchdog timer handler. 538 * [ifnet interface function] 539 */ 540 void 541 epic_watchdog(struct ifnet *ifp) 542 { 543 struct epic_softc *sc = ifp->if_softc; 544 545 printf("%s: device timeout\n", device_xname(sc->sc_dev)); 546 ifp->if_oerrors++; 547 548 (void)epic_init(ifp); 549 } 550 551 /* 552 * Handle control requests from the operator. 553 * [ifnet interface function] 554 */ 555 int 556 epic_ioctl(struct ifnet *ifp, u_long cmd, void *data) 557 { 558 struct epic_softc *sc = ifp->if_softc; 559 int s, error; 560 561 s = splnet(); 562 563 error = ether_ioctl(ifp, cmd, data); 564 if (error == ENETRESET) { 565 /* 566 * Multicast list has changed; set the hardware filter 567 * accordingly. Update our idea of the current media; 568 * epic_set_mchash() needs to know what it is. 569 */ 570 if (ifp->if_flags & IFF_RUNNING) { 571 mii_pollstat(&sc->sc_mii); 572 epic_set_mchash(sc); 573 } 574 error = 0; 575 } 576 577 splx(s); 578 return error; 579 } 580 581 /* 582 * Interrupt handler. 583 */ 584 int 585 epic_intr(void *arg) 586 { 587 struct epic_softc *sc = arg; 588 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 589 struct epic_rxdesc *rxd; 590 struct epic_txdesc *txd; 591 struct epic_descsoft *ds; 592 struct mbuf *m; 593 uint32_t intstat, rxstatus, txstatus; 594 int i, claimed = 0; 595 u_int len; 596 597 top: 598 /* 599 * Get the interrupt status from the EPIC. 600 */ 601 intstat = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_INTSTAT); 602 if ((intstat & INTSTAT_INT_ACTV) == 0) 603 return claimed; 604 605 claimed = 1; 606 607 /* 608 * Acknowledge the interrupt. 609 */ 610 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_INTSTAT, 611 intstat & INTMASK); 612 613 /* 614 * Check for receive interrupts. 615 */ 616 if (intstat & (INTSTAT_RCC | INTSTAT_RXE | INTSTAT_RQE)) { 617 for (i = sc->sc_rxptr;; i = EPIC_NEXTRX(i)) { 618 rxd = EPIC_CDRX(sc, i); 619 ds = EPIC_DSRX(sc, i); 620 621 EPIC_CDRXSYNC(sc, i, 622 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 623 624 rxstatus = rxd->er_rxstatus; 625 if (rxstatus & ER_RXSTAT_OWNER) { 626 /* 627 * We have processed all of the 628 * receive buffers. 629 */ 630 break; 631 } 632 633 /* 634 * Make sure the packet arrived intact. If an error 635 * occurred, update stats and reset the descriptor. 636 * The buffer will be reused the next time the 637 * descriptor comes up in the ring. 638 */ 639 if ((rxstatus & ER_RXSTAT_PKTINTACT) == 0) { 640 if (rxstatus & ER_RXSTAT_CRCERROR) 641 printf("%s: CRC error\n", 642 device_xname(sc->sc_dev)); 643 if (rxstatus & ER_RXSTAT_ALIGNERROR) 644 printf("%s: alignment error\n", 645 device_xname(sc->sc_dev)); 646 ifp->if_ierrors++; 647 EPIC_INIT_RXDESC(sc, i); 648 continue; 649 } 650 651 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, 652 ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); 653 654 /* 655 * The EPIC includes the CRC with every packet; 656 * trim it. 657 */ 658 len = RXSTAT_RXLENGTH(rxstatus) - ETHER_CRC_LEN; 659 660 if (len < sizeof(struct ether_header)) { 661 /* 662 * Runt packet; drop it now. 663 */ 664 ifp->if_ierrors++; 665 EPIC_INIT_RXDESC(sc, i); 666 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, 667 ds->ds_dmamap->dm_mapsize, 668 BUS_DMASYNC_PREREAD); 669 continue; 670 } 671 672 /* 673 * If the packet is small enough to fit in a 674 * single header mbuf, allocate one and copy 675 * the data into it. This greatly reduces 676 * memory consumption when we receive lots 677 * of small packets. 678 * 679 * Otherwise, we add a new buffer to the receive 680 * chain. If this fails, we drop the packet and 681 * recycle the old buffer. 682 */ 683 if (epic_copy_small != 0 && len <= MHLEN) { 684 MGETHDR(m, M_DONTWAIT, MT_DATA); 685 if (m == NULL) 686 goto dropit; 687 memcpy(mtod(m, void *), 688 mtod(ds->ds_mbuf, void *), len); 689 EPIC_INIT_RXDESC(sc, i); 690 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, 691 ds->ds_dmamap->dm_mapsize, 692 BUS_DMASYNC_PREREAD); 693 } else { 694 m = ds->ds_mbuf; 695 if (epic_add_rxbuf(sc, i) != 0) { 696 dropit: 697 ifp->if_ierrors++; 698 EPIC_INIT_RXDESC(sc, i); 699 bus_dmamap_sync(sc->sc_dmat, 700 ds->ds_dmamap, 0, 701 ds->ds_dmamap->dm_mapsize, 702 BUS_DMASYNC_PREREAD); 703 continue; 704 } 705 } 706 707 m_set_rcvif(m, ifp); 708 m->m_pkthdr.len = m->m_len = len; 709 710 /* Pass it on. */ 711 if_percpuq_enqueue(ifp->if_percpuq, m); 712 } 713 714 /* Update the receive pointer. */ 715 sc->sc_rxptr = i; 716 717 /* 718 * Check for receive queue underflow. 719 */ 720 if (intstat & INTSTAT_RQE) { 721 printf("%s: receiver queue empty\n", 722 device_xname(sc->sc_dev)); 723 /* 724 * Ring is already built; just restart the 725 * receiver. 726 */ 727 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_PRCDAR, 728 EPIC_CDRXADDR(sc, sc->sc_rxptr)); 729 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_COMMAND, 730 COMMAND_RXQUEUED | COMMAND_START_RX); 731 } 732 } 733 734 /* 735 * Check for transmission complete interrupts. 736 */ 737 if (intstat & (INTSTAT_TXC | INTSTAT_TXU)) { 738 ifp->if_flags &= ~IFF_OACTIVE; 739 for (i = sc->sc_txdirty; sc->sc_txpending != 0; 740 i = EPIC_NEXTTX(i), sc->sc_txpending--) { 741 txd = EPIC_CDTX(sc, i); 742 ds = EPIC_DSTX(sc, i); 743 744 EPIC_CDTXSYNC(sc, i, 745 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 746 747 txstatus = txd->et_txstatus; 748 if (txstatus & ET_TXSTAT_OWNER) 749 break; 750 751 EPIC_CDFLSYNC(sc, i, BUS_DMASYNC_POSTWRITE); 752 753 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 754 0, ds->ds_dmamap->dm_mapsize, 755 BUS_DMASYNC_POSTWRITE); 756 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); 757 m_freem(ds->ds_mbuf); 758 ds->ds_mbuf = NULL; 759 760 /* 761 * Check for errors and collisions. 762 */ 763 if ((txstatus & ET_TXSTAT_PACKETTX) == 0) 764 ifp->if_oerrors++; 765 else 766 ifp->if_opackets++; 767 ifp->if_collisions += 768 TXSTAT_COLLISIONS(txstatus); 769 if (txstatus & ET_TXSTAT_CARSENSELOST) 770 printf("%s: lost carrier\n", 771 device_xname(sc->sc_dev)); 772 } 773 774 /* Update the dirty transmit buffer pointer. */ 775 sc->sc_txdirty = i; 776 777 /* 778 * Cancel the watchdog timer if there are no pending 779 * transmissions. 780 */ 781 if (sc->sc_txpending == 0) 782 ifp->if_timer = 0; 783 784 /* 785 * Kick the transmitter after a DMA underrun. 786 */ 787 if (intstat & INTSTAT_TXU) { 788 printf("%s: transmit underrun\n", 789 device_xname(sc->sc_dev)); 790 bus_space_write_4(sc->sc_st, sc->sc_sh, 791 EPIC_COMMAND, COMMAND_TXUGO); 792 if (sc->sc_txpending) 793 bus_space_write_4(sc->sc_st, sc->sc_sh, 794 EPIC_COMMAND, COMMAND_TXQUEUED); 795 } 796 797 /* 798 * Try to get more packets going. 799 */ 800 epic_start(ifp); 801 } 802 803 /* 804 * Check for fatal interrupts. 805 */ 806 if (intstat & INTSTAT_FATAL_INT) { 807 if (intstat & INTSTAT_PTA) 808 printf("%s: PCI target abort error\n", 809 device_xname(sc->sc_dev)); 810 else if (intstat & INTSTAT_PMA) 811 printf("%s: PCI master abort error\n", 812 device_xname(sc->sc_dev)); 813 else if (intstat & INTSTAT_APE) 814 printf("%s: PCI address parity error\n", 815 device_xname(sc->sc_dev)); 816 else if (intstat & INTSTAT_DPE) 817 printf("%s: PCI data parity error\n", 818 device_xname(sc->sc_dev)); 819 else 820 printf("%s: unknown fatal error\n", 821 device_xname(sc->sc_dev)); 822 (void)epic_init(ifp); 823 } 824 825 /* 826 * Check for more interrupts. 827 */ 828 goto top; 829 } 830 831 /* 832 * One second timer, used to tick the MII. 833 */ 834 void 835 epic_tick(void *arg) 836 { 837 struct epic_softc *sc = arg; 838 int s; 839 840 s = splnet(); 841 mii_tick(&sc->sc_mii); 842 splx(s); 843 844 callout_reset(&sc->sc_mii_callout, hz, epic_tick, sc); 845 } 846 847 /* 848 * Fixup the clock source on the EPIC. 849 */ 850 void 851 epic_fixup_clock_source(struct epic_softc *sc) 852 { 853 int i; 854 855 /* 856 * According to SMC Application Note 7-15, the EPIC's clock 857 * source is incorrect following a reset. This manifests itself 858 * as failure to recognize when host software has written to 859 * a register on the EPIC. The appnote recommends issuing at 860 * least 16 consecutive writes to the CLOCK TEST bit to correctly 861 * configure the clock source. 862 */ 863 for (i = 0; i < 16; i++) 864 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_TEST, 865 TEST_CLOCKTEST); 866 } 867 868 /* 869 * Perform a soft reset on the EPIC. 870 */ 871 void 872 epic_reset(struct epic_softc *sc) 873 { 874 875 epic_fixup_clock_source(sc); 876 877 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_GENCTL, 0); 878 delay(100); 879 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_GENCTL, GENCTL_SOFTRESET); 880 delay(100); 881 882 epic_fixup_clock_source(sc); 883 } 884 885 /* 886 * Initialize the interface. Must be called at splnet(). 887 */ 888 int 889 epic_init(struct ifnet *ifp) 890 { 891 struct epic_softc *sc = ifp->if_softc; 892 bus_space_tag_t st = sc->sc_st; 893 bus_space_handle_t sh = sc->sc_sh; 894 const uint8_t *enaddr = CLLADDR(ifp->if_sadl); 895 struct epic_txdesc *txd; 896 struct epic_descsoft *ds; 897 uint32_t genctl, reg0; 898 int i, error = 0; 899 900 /* 901 * Cancel any pending I/O. 902 */ 903 epic_stop(ifp, 0); 904 905 /* 906 * Reset the EPIC to a known state. 907 */ 908 epic_reset(sc); 909 910 /* 911 * Magical mystery initialization. 912 */ 913 bus_space_write_4(st, sh, EPIC_TXTEST, 0); 914 915 /* 916 * Initialize the EPIC genctl register: 917 * 918 * - 64 byte receive FIFO threshold 919 * - automatic advance to next receive frame 920 */ 921 genctl = GENCTL_RX_FIFO_THRESH0 | GENCTL_ONECOPY; 922 #if BYTE_ORDER == BIG_ENDIAN 923 genctl |= GENCTL_BIG_ENDIAN; 924 #endif 925 bus_space_write_4(st, sh, EPIC_GENCTL, genctl); 926 927 /* 928 * Reset the MII bus and PHY. 929 */ 930 reg0 = bus_space_read_4(st, sh, EPIC_NVCTL); 931 bus_space_write_4(st, sh, EPIC_NVCTL, reg0 | NVCTL_GPIO1 | NVCTL_GPOE1); 932 bus_space_write_4(st, sh, EPIC_MIICFG, MIICFG_ENASER); 933 bus_space_write_4(st, sh, EPIC_GENCTL, genctl | GENCTL_RESET_PHY); 934 delay(100); 935 bus_space_write_4(st, sh, EPIC_GENCTL, genctl); 936 delay(1000); 937 bus_space_write_4(st, sh, EPIC_NVCTL, reg0); 938 939 /* 940 * Initialize Ethernet address. 941 */ 942 reg0 = enaddr[1] << 8 | enaddr[0]; 943 bus_space_write_4(st, sh, EPIC_LAN0, reg0); 944 reg0 = enaddr[3] << 8 | enaddr[2]; 945 bus_space_write_4(st, sh, EPIC_LAN1, reg0); 946 reg0 = enaddr[5] << 8 | enaddr[4]; 947 bus_space_write_4(st, sh, EPIC_LAN2, reg0); 948 949 /* 950 * Initialize receive control. Remember the external buffer 951 * size setting. 952 */ 953 reg0 = bus_space_read_4(st, sh, EPIC_RXCON) & 954 (RXCON_EXTBUFSIZESEL1 | RXCON_EXTBUFSIZESEL0); 955 reg0 |= (RXCON_RXMULTICAST | RXCON_RXBROADCAST); 956 if (ifp->if_flags & IFF_PROMISC) 957 reg0 |= RXCON_PROMISCMODE; 958 bus_space_write_4(st, sh, EPIC_RXCON, reg0); 959 960 /* Set the current media. */ 961 if ((error = epic_mediachange(ifp)) != 0) 962 goto out; 963 964 /* Set up the multicast hash table. */ 965 epic_set_mchash(sc); 966 967 /* 968 * Initialize the transmit descriptor ring. txlast is initialized 969 * to the end of the list so that it will wrap around to the first 970 * descriptor when the first packet is transmitted. 971 */ 972 for (i = 0; i < EPIC_NTXDESC; i++) { 973 txd = EPIC_CDTX(sc, i); 974 memset(txd, 0, sizeof(struct epic_txdesc)); 975 txd->et_bufaddr = EPIC_CDFLADDR(sc, i); 976 txd->et_nextdesc = EPIC_CDTXADDR(sc, EPIC_NEXTTX(i)); 977 EPIC_CDTXSYNC(sc, i, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 978 } 979 sc->sc_txpending = 0; 980 sc->sc_txdirty = 0; 981 sc->sc_txlast = EPIC_NTXDESC - 1; 982 983 /* 984 * Initialize the receive descriptor ring. 985 */ 986 for (i = 0; i < EPIC_NRXDESC; i++) { 987 ds = EPIC_DSRX(sc, i); 988 if (ds->ds_mbuf == NULL) { 989 if ((error = epic_add_rxbuf(sc, i)) != 0) { 990 printf("%s: unable to allocate or map rx " 991 "buffer %d error = %d\n", 992 device_xname(sc->sc_dev), i, error); 993 /* 994 * XXX Should attempt to run with fewer receive 995 * XXX buffers instead of just failing. 996 */ 997 epic_rxdrain(sc); 998 goto out; 999 } 1000 } else 1001 EPIC_INIT_RXDESC(sc, i); 1002 } 1003 sc->sc_rxptr = 0; 1004 1005 /* 1006 * Initialize the interrupt mask and enable interrupts. 1007 */ 1008 bus_space_write_4(st, sh, EPIC_INTMASK, INTMASK); 1009 bus_space_write_4(st, sh, EPIC_GENCTL, genctl | GENCTL_INTENA); 1010 1011 /* 1012 * Give the transmit and receive rings to the EPIC. 1013 */ 1014 bus_space_write_4(st, sh, EPIC_PTCDAR, 1015 EPIC_CDTXADDR(sc, EPIC_NEXTTX(sc->sc_txlast))); 1016 bus_space_write_4(st, sh, EPIC_PRCDAR, 1017 EPIC_CDRXADDR(sc, sc->sc_rxptr)); 1018 1019 /* 1020 * Set the EPIC in motion. 1021 */ 1022 bus_space_write_4(st, sh, EPIC_COMMAND, 1023 COMMAND_RXQUEUED | COMMAND_START_RX); 1024 1025 /* 1026 * ...all done! 1027 */ 1028 ifp->if_flags |= IFF_RUNNING; 1029 ifp->if_flags &= ~IFF_OACTIVE; 1030 1031 /* 1032 * Start the one second clock. 1033 */ 1034 callout_reset(&sc->sc_mii_callout, hz, epic_tick, sc); 1035 1036 /* 1037 * Attempt to start output on the interface. 1038 */ 1039 epic_start(ifp); 1040 1041 out: 1042 if (error) 1043 printf("%s: interface not running\n", device_xname(sc->sc_dev)); 1044 return error; 1045 } 1046 1047 /* 1048 * Drain the receive queue. 1049 */ 1050 void 1051 epic_rxdrain(struct epic_softc *sc) 1052 { 1053 struct epic_descsoft *ds; 1054 int i; 1055 1056 for (i = 0; i < EPIC_NRXDESC; i++) { 1057 ds = EPIC_DSRX(sc, i); 1058 if (ds->ds_mbuf != NULL) { 1059 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); 1060 m_freem(ds->ds_mbuf); 1061 ds->ds_mbuf = NULL; 1062 } 1063 } 1064 } 1065 1066 /* 1067 * Stop transmission on the interface. 1068 */ 1069 void 1070 epic_stop(struct ifnet *ifp, int disable) 1071 { 1072 struct epic_softc *sc = ifp->if_softc; 1073 bus_space_tag_t st = sc->sc_st; 1074 bus_space_handle_t sh = sc->sc_sh; 1075 struct epic_descsoft *ds; 1076 uint32_t reg; 1077 int i; 1078 1079 /* 1080 * Stop the one second clock. 1081 */ 1082 callout_stop(&sc->sc_mii_callout); 1083 1084 /* Down the MII. */ 1085 mii_down(&sc->sc_mii); 1086 1087 /* Paranoia... */ 1088 epic_fixup_clock_source(sc); 1089 1090 /* 1091 * Disable interrupts. 1092 */ 1093 reg = bus_space_read_4(st, sh, EPIC_GENCTL); 1094 bus_space_write_4(st, sh, EPIC_GENCTL, reg & ~GENCTL_INTENA); 1095 bus_space_write_4(st, sh, EPIC_INTMASK, 0); 1096 1097 /* 1098 * Stop the DMA engine and take the receiver off-line. 1099 */ 1100 bus_space_write_4(st, sh, EPIC_COMMAND, COMMAND_STOP_RDMA | 1101 COMMAND_STOP_TDMA | COMMAND_STOP_RX); 1102 1103 /* 1104 * Release any queued transmit buffers. 1105 */ 1106 for (i = 0; i < EPIC_NTXDESC; i++) { 1107 ds = EPIC_DSTX(sc, i); 1108 if (ds->ds_mbuf != NULL) { 1109 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); 1110 m_freem(ds->ds_mbuf); 1111 ds->ds_mbuf = NULL; 1112 } 1113 } 1114 1115 /* 1116 * Mark the interface down and cancel the watchdog timer. 1117 */ 1118 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1119 ifp->if_timer = 0; 1120 1121 if (disable) 1122 epic_rxdrain(sc); 1123 } 1124 1125 /* 1126 * Read the EPIC Serial EEPROM. 1127 */ 1128 void 1129 epic_read_eeprom(struct epic_softc *sc, int word, int wordcnt, uint16_t *data) 1130 { 1131 bus_space_tag_t st = sc->sc_st; 1132 bus_space_handle_t sh = sc->sc_sh; 1133 uint16_t reg; 1134 int i, x; 1135 1136 #define EEPROM_WAIT_READY(st, sh) \ 1137 while ((bus_space_read_4((st), (sh), EPIC_EECTL) & EECTL_EERDY) == 0) \ 1138 /* nothing */ 1139 1140 /* 1141 * Enable the EEPROM. 1142 */ 1143 bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE); 1144 EEPROM_WAIT_READY(st, sh); 1145 1146 for (i = 0; i < wordcnt; i++) { 1147 /* Send CHIP SELECT for one clock tick. */ 1148 bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE|EECTL_EECS); 1149 EEPROM_WAIT_READY(st, sh); 1150 1151 /* Shift in the READ opcode. */ 1152 for (x = 3; x > 0; x--) { 1153 reg = EECTL_ENABLE|EECTL_EECS; 1154 if (EPIC_EEPROM_OPC_READ & (1 << (x - 1))) 1155 reg |= EECTL_EEDI; 1156 bus_space_write_4(st, sh, EPIC_EECTL, reg); 1157 EEPROM_WAIT_READY(st, sh); 1158 bus_space_write_4(st, sh, EPIC_EECTL, reg|EECTL_EESK); 1159 EEPROM_WAIT_READY(st, sh); 1160 bus_space_write_4(st, sh, EPIC_EECTL, reg); 1161 EEPROM_WAIT_READY(st, sh); 1162 } 1163 1164 /* Shift in address. */ 1165 for (x = 6; x > 0; x--) { 1166 reg = EECTL_ENABLE|EECTL_EECS; 1167 if ((word + i) & (1 << (x - 1))) 1168 reg |= EECTL_EEDI; 1169 bus_space_write_4(st, sh, EPIC_EECTL, reg); 1170 EEPROM_WAIT_READY(st, sh); 1171 bus_space_write_4(st, sh, EPIC_EECTL, reg|EECTL_EESK); 1172 EEPROM_WAIT_READY(st, sh); 1173 bus_space_write_4(st, sh, EPIC_EECTL, reg); 1174 EEPROM_WAIT_READY(st, sh); 1175 } 1176 1177 /* Shift out data. */ 1178 reg = EECTL_ENABLE|EECTL_EECS; 1179 data[i] = 0; 1180 for (x = 16; x > 0; x--) { 1181 bus_space_write_4(st, sh, EPIC_EECTL, reg|EECTL_EESK); 1182 EEPROM_WAIT_READY(st, sh); 1183 if (bus_space_read_4(st, sh, EPIC_EECTL) & EECTL_EEDO) 1184 data[i] |= (1 << (x - 1)); 1185 bus_space_write_4(st, sh, EPIC_EECTL, reg); 1186 EEPROM_WAIT_READY(st, sh); 1187 } 1188 1189 /* Clear CHIP SELECT. */ 1190 bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE); 1191 EEPROM_WAIT_READY(st, sh); 1192 } 1193 1194 /* 1195 * Disable the EEPROM. 1196 */ 1197 bus_space_write_4(st, sh, EPIC_EECTL, 0); 1198 1199 #undef EEPROM_WAIT_READY 1200 } 1201 1202 /* 1203 * Add a receive buffer to the indicated descriptor. 1204 */ 1205 int 1206 epic_add_rxbuf(struct epic_softc *sc, int idx) 1207 { 1208 struct epic_descsoft *ds = EPIC_DSRX(sc, idx); 1209 struct mbuf *m; 1210 int error; 1211 1212 MGETHDR(m, M_DONTWAIT, MT_DATA); 1213 if (m == NULL) 1214 return ENOBUFS; 1215 1216 MCLGET(m, M_DONTWAIT); 1217 if ((m->m_flags & M_EXT) == 0) { 1218 m_freem(m); 1219 return ENOBUFS; 1220 } 1221 1222 if (ds->ds_mbuf != NULL) 1223 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); 1224 1225 ds->ds_mbuf = m; 1226 1227 error = bus_dmamap_load(sc->sc_dmat, ds->ds_dmamap, 1228 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, 1229 BUS_DMA_READ|BUS_DMA_NOWAIT); 1230 if (error) { 1231 printf("%s: can't load rx DMA map %d, error = %d\n", 1232 device_xname(sc->sc_dev), idx, error); 1233 panic("%s", __func__); /* XXX */ 1234 } 1235 1236 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, 1237 ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 1238 1239 EPIC_INIT_RXDESC(sc, idx); 1240 1241 return 0; 1242 } 1243 1244 /* 1245 * Set the EPIC multicast hash table. 1246 * 1247 * NOTE: We rely on a recently-updated mii_media_active here! 1248 */ 1249 void 1250 epic_set_mchash(struct epic_softc *sc) 1251 { 1252 struct ethercom *ec = &sc->sc_ethercom; 1253 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1254 struct ether_multi *enm; 1255 struct ether_multistep step; 1256 uint32_t hash, mchash[4]; 1257 1258 /* 1259 * Set up the multicast address filter by passing all multicast 1260 * addresses through a CRC generator, and then using the low-order 1261 * 6 bits as an index into the 64 bit multicast hash table (only 1262 * the lower 16 bits of each 32 bit multicast hash register are 1263 * valid). The high order bits select the register, while the 1264 * rest of the bits select the bit within the register. 1265 */ 1266 1267 if (ifp->if_flags & IFF_PROMISC) 1268 goto allmulti; 1269 1270 if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T) { 1271 /* XXX hardware bug in 10Mbps mode. */ 1272 goto allmulti; 1273 } 1274 1275 mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0; 1276 1277 ETHER_FIRST_MULTI(step, ec, enm); 1278 while (enm != NULL) { 1279 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { 1280 /* 1281 * We must listen to a range of multicast addresses. 1282 * For now, just accept all multicasts, rather than 1283 * trying to set only those filter bits needed to match 1284 * the range. (At this time, the only use of address 1285 * ranges is for IP multicast routing, for which the 1286 * range is big enough to require all bits set.) 1287 */ 1288 goto allmulti; 1289 } 1290 1291 hash = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN); 1292 hash >>= 26; 1293 1294 /* Set the corresponding bit in the hash table. */ 1295 mchash[hash >> 4] |= 1 << (hash & 0xf); 1296 1297 ETHER_NEXT_MULTI(step, enm); 1298 } 1299 1300 ifp->if_flags &= ~IFF_ALLMULTI; 1301 goto sethash; 1302 1303 allmulti: 1304 ifp->if_flags |= IFF_ALLMULTI; 1305 mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0xffff; 1306 1307 sethash: 1308 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC0, mchash[0]); 1309 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC1, mchash[1]); 1310 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC2, mchash[2]); 1311 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC3, mchash[3]); 1312 } 1313 1314 /* 1315 * Wait for the MII to become ready. 1316 */ 1317 int 1318 epic_mii_wait(struct epic_softc *sc, uint32_t rw) 1319 { 1320 int i; 1321 1322 for (i = 0; i < 50; i++) { 1323 if ((bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL) & rw) 1324 == 0) 1325 break; 1326 delay(2); 1327 } 1328 if (i == 50) { 1329 printf("%s: MII timed out\n", device_xname(sc->sc_dev)); 1330 return 1; 1331 } 1332 1333 return 0; 1334 } 1335 1336 /* 1337 * Read from the MII. 1338 */ 1339 int 1340 epic_mii_read(device_t self, int phy, int reg) 1341 { 1342 struct epic_softc *sc = device_private(self); 1343 1344 if (epic_mii_wait(sc, MMCTL_WRITE)) 1345 return 0; 1346 1347 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL, 1348 MMCTL_ARG(phy, reg, MMCTL_READ)); 1349 1350 if (epic_mii_wait(sc, MMCTL_READ)) 1351 return 0; 1352 1353 return bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MMDATA) & 1354 MMDATA_MASK; 1355 } 1356 1357 /* 1358 * Write to the MII. 1359 */ 1360 void 1361 epic_mii_write(device_t self, int phy, int reg, int val) 1362 { 1363 struct epic_softc *sc = device_private(self); 1364 1365 if (epic_mii_wait(sc, MMCTL_WRITE)) 1366 return; 1367 1368 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMDATA, val); 1369 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL, 1370 MMCTL_ARG(phy, reg, MMCTL_WRITE)); 1371 } 1372 1373 /* 1374 * Callback from PHY when media changes. 1375 */ 1376 void 1377 epic_statchg(struct ifnet *ifp) 1378 { 1379 struct epic_softc *sc = ifp->if_softc; 1380 uint32_t txcon, miicfg; 1381 1382 /* 1383 * Update loopback bits in TXCON to reflect duplex mode. 1384 */ 1385 txcon = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_TXCON); 1386 if (sc->sc_mii.mii_media_active & IFM_FDX) 1387 txcon |= (TXCON_LOOPBACK_D1|TXCON_LOOPBACK_D2); 1388 else 1389 txcon &= ~(TXCON_LOOPBACK_D1|TXCON_LOOPBACK_D2); 1390 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_TXCON, txcon); 1391 1392 /* On some cards we need manualy set fullduplex led */ 1393 if (sc->sc_hwflags & EPIC_DUPLEXLED_ON_694) { 1394 miicfg = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG); 1395 if (IFM_OPTIONS(sc->sc_mii.mii_media_active) & IFM_FDX) 1396 miicfg |= MIICFG_ENABLE; 1397 else 1398 miicfg &= ~MIICFG_ENABLE; 1399 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG, miicfg); 1400 } 1401 1402 /* 1403 * There is a multicast filter bug in 10Mbps mode. Kick the 1404 * multicast filter in case the speed changed. 1405 */ 1406 epic_set_mchash(sc); 1407 } 1408 1409 /* 1410 * Callback from ifmedia to request new media setting. 1411 * 1412 * XXX Looks to me like some of this complexity should move into 1413 * XXX one or two custom PHY drivers. --dyoung 1414 */ 1415 int 1416 epic_mediachange(struct ifnet *ifp) 1417 { 1418 struct epic_softc *sc = ifp->if_softc; 1419 struct mii_data *mii = &sc->sc_mii; 1420 struct ifmedia *ifm = &mii->mii_media; 1421 int media = ifm->ifm_cur->ifm_media; 1422 uint32_t miicfg; 1423 struct mii_softc *miisc; 1424 int cfg, rc; 1425 1426 if ((ifp->if_flags & IFF_UP) == 0) 1427 return 0; 1428 1429 if (IFM_INST(media) != sc->sc_serinst) { 1430 /* If we're not selecting serial interface, select MII mode */ 1431 #ifdef EPICMEDIADEBUG 1432 printf("%s: parallel mode\n", ifp->if_xname); 1433 #endif 1434 miicfg = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG); 1435 miicfg &= ~MIICFG_SERMODEENA; 1436 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG, miicfg); 1437 } 1438 1439 if ((rc = mii_mediachg(mii)) == ENXIO) 1440 rc = 0; 1441 1442 if (IFM_INST(media) == sc->sc_serinst) { 1443 /* select serial interface */ 1444 #ifdef EPICMEDIADEBUG 1445 printf("%s: serial mode\n", ifp->if_xname); 1446 #endif 1447 miicfg = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG); 1448 miicfg |= (MIICFG_SERMODEENA | MIICFG_ENABLE); 1449 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG, miicfg); 1450 1451 /* There is no driver to fill this */ 1452 mii->mii_media_active = media; 1453 mii->mii_media_status = 0; 1454 1455 epic_statchg(mii->mii_ifp); 1456 return 0; 1457 } 1458 1459 /* Lookup selected PHY */ 1460 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) { 1461 if (IFM_INST(media) == miisc->mii_inst) 1462 break; 1463 } 1464 if (!miisc) { 1465 printf("%s: can't happen\n", __func__); /* ??? panic */ 1466 return 0; 1467 } 1468 #ifdef EPICMEDIADEBUG 1469 printf("%s: using phy %s\n", ifp->if_xname, 1470 device_xname(miisc->mii_dev)); 1471 #endif 1472 1473 if (miisc->mii_flags & MIIF_HAVEFIBER) { 1474 /* XXX XXX assume it's a Level1 - should check */ 1475 1476 /* We have to powerup fiber transceivers */ 1477 cfg = PHY_READ(miisc, MII_LXTPHY_CONFIG); 1478 if (IFM_SUBTYPE(media) == IFM_100_FX) { 1479 #ifdef EPICMEDIADEBUG 1480 printf("%s: power up fiber\n", ifp->if_xname); 1481 #endif 1482 cfg |= (CONFIG_LEDC1 | CONFIG_LEDC0); 1483 } else { 1484 #ifdef EPICMEDIADEBUG 1485 printf("%s: power down fiber\n", ifp->if_xname); 1486 #endif 1487 cfg &= ~(CONFIG_LEDC1 | CONFIG_LEDC0); 1488 } 1489 PHY_WRITE(miisc, MII_LXTPHY_CONFIG, cfg); 1490 } 1491 1492 return rc; 1493 } 1494
Indexes created Mon Oct 20 11:09:49 GMT 2025