smc90cx6.c revision 1.5
1 /* $NetBSD: smc90cx6.c,v 1.5 1995/04/11 18:52:00 chopps Exp $ */ 2 3 /* 4 * Copyright (c) 1994, 1995 Ignatios Souvatzis 5 * Copyright (c) 1994 Timo Rossi 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by Timo Rossi 19 * This product includes software developed by Ignatios Souvatzis 20 * 4. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 26 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * Driver for the Commodore Busines Machines arcnet card 37 * written by Ignatios Souvatzis <is (at) beverly.rhein.de>, 38 * somewhat based on Amiga if_ed.c 39 */ 40 41 #define BAHASMCOPY /**/ 42 #define BAHSOFTCOPY /**/ 43 /* #define BAHTIMINGS /**/ 44 /* #define BAH_DEBUG 3 /**/ 45 46 #include "bpfilter.h" 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/mbuf.h> 51 #include <sys/buf.h> 52 #include <sys/device.h> 53 #include <sys/protosw.h> 54 #include <sys/socket.h> 55 #include <sys/syslog.h> 56 #include <sys/ioctl.h> 57 #include <sys/errno.h> 58 59 #include <net/if.h> 60 #include <net/if_dl.h> 61 #include <net/if_types.h> 62 #include <net/netisr.h> 63 64 #ifdef INET 65 #include <netinet/in.h> 66 #include <netinet/in_systm.h> 67 #include <netinet/in_var.h> 68 #include <netinet/ip.h> 69 #include <netinet/if_ether.h> 70 #include <netinet/if_arc.h> 71 #endif 72 73 #if NBPFILTER > 0 74 #include <net/bpf.h> 75 #include <net/bpfdesc.h> 76 #endif 77 78 #include <sys/kernel.h> 79 #include <machine/cpu.h> 80 #include <machine/mtpr.h> 81 82 #include <amiga/amiga/device.h> 83 #include <amiga/amiga/isr.h> 84 #include <amiga/dev/zbusvar.h> 85 #include <amiga/dev/if_bahreg.h> 86 87 /* these should be elsewhere */ 88 89 #define ARC_MIN_LEN 1 90 #define ARC_MIN_FORBID_LEN 254 91 #define ARC_MAX_FORBID_LEN 256 92 #define ARC_MAX_LEN 508 93 #define ARC_ADDR_LEN 1 94 95 #define MIN(a,b) ((b)<0?(a):min((a),(b))) 96 97 /* 98 * This currently uses 2 bufs for tx, 2 for rx 99 * 100 * New rx protocol: 101 * 102 * rx has a fillcount variable. If fillcount > (NRXBUF-1), 103 * rx can be switched off from rx hard int. 104 * Else rx is restarted on the other receiver. 105 * rx soft int counts down. if it is == (NRXBUF-1), it restarts 106 * the receiver. 107 * To ensure packet ordering (we need that for 1201 later), we have a counter 108 * which is incremented modulo 256 on each receive and a per buffer 109 * variable, which is set to the counter on filling. The soft int can 110 * compare both values to determine the older packet. 111 * 112 * Transmit direction: 113 * 114 * bah_start checks tx_fillcount 115 * case 2: return 116 * 117 * else fill tx_act ^ 1 && inc tx_fillcount 118 * 119 * check tx_fillcount again. 120 * case 2: set IFF_OACTIVE to stop arc_output from filling us. 121 * case 1: start tx 122 * 123 * tint clears IFF_OCATIVE, decrements and checks tx_fillcount 124 * case 1: start tx on tx_act ^ 1, softcall bah_start 125 * case 0: softcall bah_start 126 * 127 * #define fill(i) get mbuf && copy mbuf to chip(i) 128 */ 129 130 /* 131 * Arcnet software status per interface 132 * 133 */ 134 struct bah_softc { 135 struct device sc_dev; 136 struct arccom sc_arccom; /* Common arcnet structures */ 137 struct isr sc_isr; 138 struct a2060 *sc_base; 139 u_long sc_recontime; /* seconds only, I'm lazy */ 140 u_long sc_reconcount; /* for the above */ 141 u_long sc_reconcount_excessive; /* for the above */ 142 #define ARC_EXCESSIVE_RECONS 20 143 #define ARC_EXCESSIVE_RECONS_REWARN 400 144 u_char sc_bufstat[4]; /* use for packet no for rx */ 145 u_char sc_intmask; 146 u_char sc_rx_packetno; 147 u_char sc_rx_act; /* 2..3 */ 148 u_char sc_tx_act; /* 0..1 */ 149 u_char sc_rx_fillcount; 150 u_char sc_tx_fillcount; 151 u_char sc_broadcast[2]; /* is it a broadcast packet? */ 152 u_char sc_retransmits[2]; /* unused at the moment */ 153 #ifdef BAHTIMINGS 154 struct { 155 int mincopyin; 156 int maxcopyin; /* divided by byte count */ 157 int mincopyout; 158 int maxcopyout; 159 int minsend; 160 int maxsend; 161 int lasttxstart_mics; 162 struct timeval lasttxstart_tv; 163 164 } sc_stats; 165 #endif 166 /* Add other fields as needed... -- IS */ 167 }; 168 169 int bahmatch __P((struct device *, void *, void *)); 170 void bahattach __P((struct device *, struct device *, void *)); 171 void bah_ini __P((struct bah_softc *)); 172 void bah_reset __P((struct bah_softc *)); 173 void bah_stop __P((struct bah_softc *)); 174 void bah_start __P((struct ifnet *)); 175 int bahintr __P((struct bah_softc *sc)); 176 int bah_ioctl __P((struct ifnet *, unsigned long, caddr_t)); 177 void movepout __P((u_char *from, u_char volatile *to, int len)); 178 void movepin __P((u_char volatile *from, u_char *to, int len)); 179 void bah_srint __P((struct bah_softc *sc, void *dummy)); 180 void callstart __P((struct bah_softc *sc, void *dummy)); 181 182 #ifdef BAHTIMINGS 183 int clkread(); 184 #endif 185 186 struct cfdriver bahcd = { 187 NULL, "bah", bahmatch, bahattach, DV_IFNET, sizeof(struct bah_softc) 188 }; 189 190 int 191 bahmatch(parent, match, aux) 192 struct device *parent; 193 void *match, *aux; 194 { 195 struct zbus_args *zap = aux; 196 197 if ((zap->manid == 514 || zap->manid == 1053) && zap->prodid == 9) 198 return (1); 199 200 return (0); 201 } 202 203 void 204 bahattach(parent, self, aux) 205 struct device *parent, *self; 206 void *aux; 207 { 208 struct bah_softc *sc = (void *)self; 209 struct zbus_args *zap = aux; 210 struct ifnet *ifp = &sc->sc_arccom.ac_if; 211 int i, s, linkaddress; 212 213 #if (defined(BAH_DEBUG) && (BAH_DEBUG > 2)) 214 printf("\n%s: attach(0x%x, 0x%x, 0x%x)\n", 215 sc->sc_dev.dv_xname, parent, self, aux); 216 #endif 217 s = splhigh(); 218 sc->sc_base = zap->va; 219 220 /* 221 * read the arcnet address from the board 222 */ 223 224 sc->sc_base->kick1 = 0x0; 225 sc->sc_base->kick2 = 0x0; 226 DELAY(120); 227 228 sc->sc_base->kick1 = 0xFF; 229 sc->sc_base->kick2 = 0xFF; 230 do { 231 DELAY(120); 232 } while (!(sc->sc_base->status & ARC_POR)); 233 234 linkaddress = sc->sc_base->dipswitches; 235 236 #ifdef BAHTIMINGS 237 printf(": link addr 0x%02x(%ld), with timer\n", 238 linkaddress, linkaddress); 239 #else 240 printf(": link addr 0x%02x(%ld)\n", linkaddress, linkaddress); 241 #endif 242 243 sc->sc_arccom.ac_anaddr = sc->sc_base->dipswitches; 244 245 /* clear the int mask... */ 246 247 sc->sc_base->status = sc->sc_intmask = 0; 248 249 sc->sc_base->command = ARC_CONF(CONF_LONG); 250 sc->sc_base->command = ARC_CLR(CLR_POR|CLR_RECONFIG); 251 sc->sc_recontime = sc->sc_reconcount = 0; 252 253 /* and reenable kernel int level */ 254 splx(s); 255 256 /* 257 * set interface to stopped condition (reset) 258 * 259 */ 260 bah_stop(sc); 261 262 ifp->if_unit = sc->sc_dev.dv_unit; 263 ifp->if_name = bahcd.cd_name; 264 ifp->if_output = arc_output; 265 ifp->if_start = bah_start; 266 ifp->if_ioctl = bah_ioctl; 267 /* might need later: ifp->if_watchdog = bah_watchdog */ 268 ifp->if_flags = 269 IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_NOARP; 270 271 if_attach(ifp); 272 arc_ifattach(ifp); 273 274 #if NBPFILTER > 0 275 bpfattach(&ifp->if_bpf, ifp, DLT_ARCNET, ARC_HDRLEN); 276 #endif 277 278 sc->sc_isr.isr_intr = bahintr; 279 sc->sc_isr.isr_arg = sc; 280 sc->sc_isr.isr_ipl = 2; 281 add_isr(&sc->sc_isr); 282 } 283 284 /* 285 * Initialize device 286 * 287 */ 288 void 289 bah_init(sc) 290 struct bah_softc *sc; 291 { 292 struct ifnet *ifp; 293 int s; 294 295 ifp = &sc->sc_arccom.ac_if; 296 297 /* Address not known. */ 298 if (ifp->if_addrlist == 0) 299 return; 300 301 if ((ifp->if_flags & IFF_RUNNING) == 0) { 302 s = splimp(); 303 ifp->if_flags |= IFF_RUNNING; 304 bah_reset(sc); 305 bah_start(ifp); 306 splx(s); 307 } 308 } 309 310 /* 311 * Reset the interface... 312 * 313 * this assumes that it is called inside a critical section... 314 * 315 */ 316 void 317 bah_reset(sc) 318 struct bah_softc *sc; 319 { 320 struct ifnet *ifp; 321 int i, s; 322 323 ifp = &sc->sc_arccom.ac_if; 324 325 #ifdef BAH_DEBUG 326 printf("%s: reset\n", sc->sc_dev.dv_xname); 327 #endif 328 /* stop hardware in case it still runs */ 329 330 sc->sc_base->kick1 = 0; 331 sc->sc_base->kick2 = 0; 332 DELAY(120); 333 334 /* and restart it */ 335 sc->sc_base->kick1 = 0xFF; 336 sc->sc_base->kick2 = 0xFF; 337 338 do { 339 DELAY(120); 340 } while (!(sc->sc_base->status & ARC_POR)); 341 342 #if defined(BAH_DEBUG) && (BAH_DEBUG > 2) 343 printf("%s: reset: card reset, status=0x%02x\n", 344 sc->sc_dev.dv_xname, sc->sc_base->status); 345 #endif 346 /* POR is NMI, but we need it below: */ 347 sc->sc_intmask = ARC_RECON|ARC_POR; 348 sc->sc_base->status = sc->sc_intmask; 349 sc->sc_base->command = ARC_CONF(CONF_LONG); 350 351 #ifdef BAH_DEBUG 352 printf("%s: reset: chip configured, status=0x%02x\n", 353 sc->sc_dev.dv_xname, sc->sc_base->status); 354 #endif 355 356 sc->sc_base->command = ARC_CLR(CLR_POR|CLR_RECONFIG); 357 358 #ifdef BAH_DEBUG 359 printf("%s: reset: bits cleared, status=0x%02x\n", 360 sc->sc_dev.dv_xname, sc->sc_base->status); 361 #endif 362 363 sc->sc_reconcount_excessive = ARC_EXCESSIVE_RECONS; 364 365 /* start receiver */ 366 367 sc->sc_intmask |= ARC_RI; 368 369 sc->sc_bufstat[2] = 370 sc->sc_bufstat[3] = 371 sc->sc_rx_packetno = 372 sc->sc_rx_fillcount = 0; 373 374 sc->sc_rx_act = 2; 375 376 sc->sc_base->command = ARC_RXBC(2); 377 sc->sc_base->status = sc->sc_intmask; 378 379 #ifdef BAH_DEBUG 380 printf("%s: reset: started receiver, status=0x%02x\n", 381 sc->sc_dev.dv_xname, sc->sc_base->status); 382 #endif 383 384 /* and init transmitter status */ 385 sc->sc_tx_act = 0; 386 sc->sc_tx_fillcount = 0; 387 388 ifp->if_flags |= IFF_RUNNING; 389 ifp->if_flags &= ~IFF_OACTIVE; 390 391 #ifdef BAHTIMINGS 392 bzero((caddr_t)&(sc->sc_stats),sizeof(sc->sc_stats)); 393 sc->sc_stats.mincopyin = 394 sc->sc_stats.mincopyout = 395 sc->sc_stats.minsend = 999999L; 396 #endif 397 398 bah_start(ifp); 399 } 400 401 /* 402 * Take interface offline 403 */ 404 void 405 bah_stop(sc) 406 struct bah_softc *sc; 407 { 408 int s; 409 410 /* Stop the interrupts */ 411 sc->sc_base->status = 0; 412 413 /* Stop the interface */ 414 sc->sc_base->kick1 = 0; 415 sc->sc_base->kick2 = 0; 416 417 #ifdef BAHTIMINGS 418 log(LOG_DEBUG,"%s\ 419 To board: %6ld .. %6ld ns/byte\nFrom board: %6ld .. %6ld ns/byte\n\ 420 Send time: %6ld .. %6ld mics\n", 421 sc->sc_dev.dv_xname, 422 sc->sc_stats.mincopyout,sc->sc_stats.maxcopyout, 423 sc->sc_stats.mincopyin, sc->sc_stats.maxcopyin, 424 sc->sc_stats.minsend, sc->sc_stats.maxsend); 425 426 sc->sc_stats.minsend = 427 sc->sc_stats.mincopyout = 428 sc->sc_stats.mincopyin = 999999L; 429 sc->sc_stats.maxsend = 430 sc->sc_stats.maxcopyout = 431 sc->sc_stats.maxcopyin = 0L; 432 #endif 433 434 } 435 436 inline void 437 movepout(from,to,len) 438 u_char *from; 439 volatile u_char *to; 440 int len; 441 { 442 #ifdef BAHASMCOPY 443 u_short shortd; 444 u_long longd,longd1,longd2,longd3,longd4; 445 446 if ((len>3) && ((int)from)&3) { 447 switch (((int)from) & 3) { 448 case 3: 449 *to = *from++; 450 to+=2;--len; 451 break; 452 case 1: 453 *to = *from++; 454 to += 2; --len; 455 case 2: 456 shortd = *((u_short *)from)++; 457 asm("movepw %0,%1@(0)" : : "d"(shortd), "a"(to)); 458 to += 4; len -= 2; 459 break; 460 default: 461 } 462 463 while (len>=32) { 464 longd1 = *((u_long *)from)++; 465 longd2 = *((u_long *)from)++; 466 longd3 = *((u_long *)from)++; 467 longd4 = *((u_long *)from)++; 468 asm("movepl %0,%1@(0)" : : "d"(longd1), "a"(to)); 469 asm("movepl %0,%1@(8)" : : "d"(longd2), "a"(to)); 470 asm("movepl %0,%1@(16)" : : "d"(longd3), "a"(to)); 471 asm("movepl %0,%1@(24)" : : "d"(longd4), "a"(to)); 472 473 longd1 = *((u_long *)from)++; 474 longd2 = *((u_long *)from)++; 475 longd3 = *((u_long *)from)++; 476 longd4 = *((u_long *)from)++; 477 asm("movepl %0,%1@(32)" : : "d"(longd1), "a"(to)); 478 asm("movepl %0,%1@(40)" : : "d"(longd2), "a"(to)); 479 asm("movepl %0,%1@(48)" : : "d"(longd3), "a"(to)); 480 asm("movepl %0,%1@(56)" : : "d"(longd4), "a"(to)); 481 482 to += 64; len -= 32; 483 } 484 while (len>0) { 485 longd = *((u_long *)from)++; 486 asm("movepl %0,%1@(0)" : : "d"(longd), "a"(to)); 487 to += 8; len -= 4; 488 } 489 } 490 #endif 491 while (len>0) { 492 *to = *from++; 493 to+=2; 494 --len; 495 } 496 } 497 498 /* 499 * Start output on interface. Get another datagram to send 500 * off the interface queue, and copy it to the 501 * interface becore starting the output 502 * 503 * this assumes that it is called inside a critical section... 504 * XXX hm... does it still? 505 * 506 */ 507 void 508 bah_start(ifp) 509 struct ifnet *ifp; 510 { 511 struct bah_softc *sc; 512 struct mbuf *m,*mp; 513 volatile u_char *bah_ram_ptr; 514 int i, len, tlen, offset, s, buffer; 515 516 #ifdef BAHTIMINGS 517 int copystart,lencopy,perbyte; 518 #endif 519 520 sc = bahcd.cd_devs[ifp->if_unit]; 521 522 #if defined(BAH_DEBUG) && (BAH_DEBUG > 3) 523 printf("%s: start(0x%x)\n", sc->sc_dev.dv_xname, ifp); 524 #endif 525 526 if ((ifp->if_flags & IFF_RUNNING) == 0) 527 return; 528 529 s = splimp(); 530 531 if (sc->sc_tx_fillcount >= 2) { 532 splx(s); 533 return; 534 } 535 536 IF_DEQUEUE(&ifp->if_snd, m); 537 buffer = sc->sc_tx_act ^ 1; 538 539 splx(s); 540 541 if (m == 0) 542 return; 543 544 #if NBPFILTER > 0 545 /* 546 * If bpf is listening on this interface, let it 547 * see the packet before we commit it to the wire 548 * 549 * (can't give the copy in A2060 card RAM to bpf, because 550 * that RAM is just accessed as on every other byte) 551 */ 552 if (ifp->if_bpf) 553 bpf_mtap(ifp->if_bpf, m); 554 #endif 555 556 /* we need the data length beforehand */ 557 for (mp = m, tlen=0; mp; mp = mp->m_next) 558 tlen += mp->m_len; 559 560 #ifdef BAH_DEBUG 561 m = m_pullup(m,3); /* gcc does structure padding */ 562 printf("%s: start: filling %ld from %ld to %ld type %ld\n", 563 sc->sc_dev.dv_xname, 564 buffer, 565 mtod(m, u_char *)[0], 566 mtod(m, u_char *)[1], 567 mtod(m, u_char *)[2]); 568 #else 569 m = m_pullup(m,2); 570 #endif 571 bah_ram_ptr = sc->sc_base->buffers + buffer*512*2; 572 573 /* write the addresses to RAM and throw them away */ 574 575 /* 576 * Hardware does this: Yet Another Microsecond Saved. 577 * (btw, timing code says usually 2 microseconds) 578 * bah_ram_ptr[0*2] = mtod(m, u_char *)[0]; 579 */ 580 bah_ram_ptr[1*2] = mtod(m, u_char *)[1]; 581 m_adj(m, 2); 582 583 /* correct total length for that */ 584 tlen -= 2; 585 if (tlen < ARC_MIN_FORBID_LEN) { 586 offset = 256-tlen; 587 bah_ram_ptr[2*2] = offset; 588 } else { 589 if (tlen <= ARC_MAX_FORBID_LEN) 590 offset = 512-3-tlen; 591 else { 592 if (tlen > ARC_MAX_LEN) 593 tlen = ARC_MAX_LEN; 594 offset = 512-tlen; 595 } 596 597 bah_ram_ptr[2*2] = 0; 598 bah_ram_ptr[3*2] = offset; 599 } 600 bah_ram_ptr += offset*2; 601 602 /* lets loop again through the mbuf chain */ 603 604 for (mp = m; mp; mp=mp->m_next) { 605 if (len = mp->m_len) { /* YAMS */ 606 #ifdef BAHTIMINGS 607 lencopy = len; 608 copystart = clkread(); 609 #endif 610 movepout(mtod(mp, caddr_t),bah_ram_ptr,len); 611 612 #ifdef BAHTIMINGS 613 perbyte = 1000*(clkread() - copystart) / lencopy; 614 sc->sc_stats.mincopyout = 615 MIN(sc->sc_stats.mincopyout,perbyte); 616 sc->sc_stats.maxcopyout = 617 max(sc->sc_stats.maxcopyout,perbyte); 618 #endif 619 bah_ram_ptr += len*2; 620 } 621 } 622 623 sc->sc_broadcast[buffer] = (m->m_flags & M_BCAST) != 0; 624 sc->sc_retransmits[buffer] = (m->m_flags & M_BCAST) ? 1 : 5; 625 626 /* actually transmit the packet */ 627 s = splimp(); 628 629 if (++sc->sc_tx_fillcount > 1) { 630 /* 631 * We are filled up to the rim. No more bufs for the moment, 632 * please. 633 */ 634 ifp->if_flags |= IFF_OACTIVE; 635 } else { 636 #ifdef BAH_DEBUG 637 printf("%s: start: starting transmitter on buffer %d\n", 638 sc->sc_dev.dv_xname, buffer); 639 #endif 640 /* Transmitter was off, start it */ 641 sc->sc_tx_act = buffer; 642 643 /* 644 * We still can accept another buf, so don't: 645 * ifp->if_flags |= IFF_OACTIVE; 646 */ 647 sc->sc_intmask |= ARC_TA; 648 sc->sc_base->command = ARC_TX(buffer); 649 sc->sc_base->status = sc->sc_intmask; 650 651 #ifdef BAHTIMINGS 652 bcopy((caddr_t)&time, 653 (caddr_t)&(sc->sc_stats.lasttxstart_tv), 654 sizeof(struct timeval)); 655 656 sc->sc_stats.lasttxstart_mics = clkread(); 657 #endif 658 } 659 splx(s); 660 m_freem(m); 661 662 /* 663 * We dont really need a transmit timeout timer, do we? 664 * XXX (sighing deeply) yes, after 10 times reading the docs, 665 * I realized that in the case the receiver NAKs the buffer request, 666 * the hardware retries till shutdown. 667 * TODO: Insert some reasonable transmit timeout timer. 668 */ 669 } 670 671 void 672 callstart(sc, dummy) 673 struct bah_softc *sc; 674 void *dummy; 675 { 676 677 bah_start(&sc->sc_arccom.ac_if); 678 } 679 680 inline void 681 movepin(from,to,len) 682 volatile u_char *from; 683 u_char *to; 684 int len; 685 { 686 #ifdef BAHASMCOPY 687 unsigned long longd, longd1, longd2, longd3, longd4; 688 ushort shortd; 689 690 if ((len>3) && (((int)to) & 3)) { 691 switch (((int)to) & 3) { 692 case 3: *to++ = *from; 693 from+=2; --len; 694 break; 695 case 1: *to++ = *from; 696 from+=2; --len; 697 case 2: asm ("movepw %1@(0),%0": "=d" (shortd) : "a" (from)); 698 *((ushort *)to)++ = shortd; 699 from += 4; len -= 2; 700 break; 701 default: 702 } 703 704 while (len>=32) { 705 asm("movepl %1@(0),%0" : "=d"(longd1) : "a" (from)); 706 asm("movepl %1@(8),%0" : "=d"(longd2) : "a" (from)); 707 asm("movepl %1@(16),%0" : "=d"(longd3) : "a" (from)); 708 asm("movepl %1@(24),%0" : "=d"(longd4) : "a" (from)); 709 *((unsigned long *)to)++ = longd1; 710 *((unsigned long *)to)++ = longd2; 711 *((unsigned long *)to)++ = longd3; 712 *((unsigned long *)to)++ = longd4; 713 714 asm("movepl %1@(32),%0" : "=d"(longd1) : "a" (from)); 715 asm("movepl %1@(40),%0" : "=d"(longd2) : "a" (from)); 716 asm("movepl %1@(48),%0" : "=d"(longd3) : "a" (from)); 717 asm("movepl %1@(56),%0" : "=d"(longd4) : "a" (from)); 718 *((unsigned long *)to)++ = longd1; 719 *((unsigned long *)to)++ = longd2; 720 *((unsigned long *)to)++ = longd3; 721 *((unsigned long *)to)++ = longd4; 722 723 from += 64; len -= 32; 724 } 725 while (len>0) { 726 asm("movepl %1@(0),%0" : "=d"(longd) : "a" (from)); 727 *((unsigned long *)to)++ = longd; 728 from += 8; len -= 4; 729 } 730 731 } 732 #endif /* BAHASMCOPY */ 733 while (len>0) { 734 *to++ = *from; 735 from+=2; 736 --len; 737 } 738 739 } 740 741 /* 742 * Arcnet interface receiver soft interrupt: 743 * get the stuff out of any filled buffer we find. 744 */ 745 void 746 bah_srint(sc,dummy) 747 struct bah_softc *sc; 748 void *dummy; 749 { 750 int buffer, buffer1, len, len1, amount, offset, s, i; 751 u_char volatile *bah_ram_ptr; 752 struct mbuf *m, *dst, *head; 753 struct arc_header *ah; 754 struct ifnet *ifp; 755 756 head = 0; 757 ifp = &sc->sc_arccom.ac_if; 758 759 #ifdef BAHTIMINGS 760 int copystart,lencopy,perbyte; 761 #endif 762 763 s = splimp(); 764 if (sc->sc_rx_fillcount <= 1) 765 buffer = sc->sc_rx_act ^ 1; 766 else { 767 768 i = ((unsigned)(sc->sc_bufstat[2] - sc->sc_bufstat[3])) % 256; 769 if (i < 64) 770 buffer = 3; 771 else if (i > 192) 772 buffer = 2; 773 else { 774 log(LOG_WARNING, 775 "%s: rx srint: which is older, %ld or %ld?\ 776 (filled %ld)\n", 777 sc->sc_dev.dv_xname, 778 sc->sc_bufstat[2], sc->sc_bufstat[3], 779 sc->sc_rx_fillcount); 780 splx(s); 781 return; 782 } 783 } 784 splx(s); 785 786 /* Allocate header mbuf */ 787 MGETHDR(m, M_DONTWAIT, MT_DATA); 788 789 if (m == 0) { 790 /* 791 * in case s.th. goes wrong with mem, drop it 792 * to make sure the receiver can be started again 793 * count it as input error (we dont have any other 794 * detectable) 795 */ 796 ifp->if_ierrors++; 797 goto cleanup; 798 } 799 800 m->m_pkthdr.rcvif = ifp; 801 m->m_len = 0; 802 803 /* 804 * Align so that IP packet will be longword aligned. Here we 805 * assume that m_data of new packet is longword aligned. 806 * When implementing RFC1201, we might have to change it to 2, 807 * (2*sizeof(ulong) - ARC_HDRLEN - sizeof(splitflag) - sizeof(pckid)) 808 * possibly packet type dependent. 809 */ 810 811 m->m_data += 1; /* sizeof(ulong) - ARC_HDRLEN */ 812 813 head = m; 814 815 ah = mtod(head, struct arc_header *); 816 bah_ram_ptr = sc->sc_base->buffers + buffer*512*2; 817 818 ah->arc_shost = bah_ram_ptr[0*2]; 819 ah->arc_dhost = bah_ram_ptr[1*2]; 820 offset = bah_ram_ptr[2*2]; 821 if (offset) 822 len = 256 - offset; 823 else { 824 offset = bah_ram_ptr[3*2]; 825 len = 512 - offset; 826 } 827 m->m_pkthdr.len = len+2; /* whole packet length */ 828 m->m_len += 2; /* mbuf filled with ARCnet addresses */ 829 bah_ram_ptr += offset*2; /* ram buffer continues there */ 830 831 while (len > 0) { 832 833 len1 = len; 834 amount = M_TRAILINGSPACE(m); 835 836 if (amount == 0) { 837 dst = m; 838 MGET(m, M_DONTWAIT, MT_DATA); 839 840 if (m == 0) { 841 ifp->if_ierrors++; 842 goto cleanup; 843 } 844 845 if (len1 >= MINCLSIZE) 846 MCLGET(m, M_DONTWAIT); 847 848 m->m_len = 0; 849 dst->m_next = m; 850 amount = M_TRAILINGSPACE(m); 851 } 852 853 if (amount < len1) 854 len1 = amount; 855 856 #ifdef BAHTIMINGS 857 lencopy = len; 858 copystart = clkread(); 859 #endif 860 861 movepin(bah_ram_ptr,mtod(m, u_char *) + m->m_len, len1); 862 863 #ifdef BAHTIMINGS 864 perbyte = 1000*(clkread() - copystart) / lencopy; 865 sc->sc_stats.mincopyin = MIN(sc->sc_stats.mincopyin,perbyte); 866 sc->sc_stats.maxcopyin = max(sc->sc_stats.maxcopyin,perbyte); 867 #endif 868 869 m->m_len += len1; 870 bah_ram_ptr += len1*2; 871 len -= len1; 872 } 873 874 #if NBPFILTER > 0 875 if (ifp->if_bpf) 876 bpf_mtap(ifp->if_bpf, head); 877 #endif 878 879 m_adj(head, 3); /* gcc does structure padding */ 880 arc_input(ifp, ah, head); 881 882 /* arc_input has freed it, we dont need to... */ 883 884 head = NULL; 885 ifp->if_ipackets++; 886 887 cleanup: 888 889 if (head == NULL) 890 m_freem(head); 891 892 s = splimp(); 893 894 if (--sc->sc_rx_fillcount == 1) { 895 896 /* was off, restart it on buffer just emptied */ 897 sc->sc_rx_act = buffer; 898 sc->sc_intmask |= ARC_RI; 899 900 /* this also clears the RI flag interupt: */ 901 sc->sc_base->command = ARC_RXBC(buffer); 902 sc->sc_base->status = sc->sc_intmask; 903 904 #ifdef BAH_DEBUG 905 printf("%s: srint: restarted rx on buf %ld\n", 906 sc->sc_dev.dv_xname, buffer); 907 #endif 908 } 909 splx(s); 910 } 911 912 inline static void 913 bah_tint(sc) 914 struct bah_softc *sc; 915 { 916 int buffer; 917 u_char volatile *bah_ram_ptr; 918 int isr; 919 int clknow; 920 921 buffer = sc->sc_tx_act; 922 isr = sc->sc_base->status; 923 924 /* XXX insert retransmit code etc. here. For now just: */ 925 926 if (!(isr & ARC_TMA) && !(sc->sc_broadcast[buffer])) 927 sc->sc_arccom.ac_if.if_oerrors++; 928 else 929 sc->sc_arccom.ac_if.if_opackets++; 930 931 #ifdef BAHTIMINGS 932 clknow = clkread(); 933 934 sc->sc_stats.minsend = MIN(sc->sc_stats.minsend, 935 clknow - sc->sc_stats.lasttxstart_mics); 936 937 sc->sc_stats.maxsend = max(sc->sc_stats.maxsend, 938 clknow - sc->sc_stats.lasttxstart_mics); 939 #endif 940 941 /* We know we can accept another buffer at this point. */ 942 sc->sc_arccom.ac_if.if_flags &= ~IFF_OACTIVE; 943 944 if (--sc->sc_tx_fillcount > 0) { 945 946 /* 947 * start tx on other buffer. 948 * This also clears the int flag 949 */ 950 buffer ^= 1; 951 sc->sc_tx_act = buffer; 952 953 /* 954 * already given: 955 * sc->sc_intmask |= ARC_TA; 956 * sc->sc_base->status = sc->sc_intmask; 957 */ 958 sc->sc_base->command = ARC_TX(buffer); 959 960 #ifdef BAHTIMINGS 961 bcopy((caddr_t)&time, 962 (caddr_t)&(sc->sc_stats.lasttxstart_tv), 963 sizeof(struct timeval)); 964 965 sc->sc_stats.lasttxstart_mics = clkread(); 966 #endif 967 968 #if defined(BAH_DEBUG) && (BAH_DEBUG > 1) 969 printf("%s: tint: starting tx on buffer %d, status 0x%02x\n", 970 sc->sc_dev.dv_xname, buffer, sc->sc_base->status); 971 #endif 972 } else { 973 /* have to disable TX interrupt */ 974 sc->sc_intmask &= ~ARC_TA; 975 sc->sc_base->status = sc->sc_intmask; 976 977 #ifdef BAH_DEBUG 978 printf("%s: tint: no more buffers to send, status 0x%02x\n", 979 sc->sc_dev.dv_xname, sc->sc_base->status); 980 #endif 981 } 982 983 #ifdef BAHSOFTCOPY 984 /* schedule soft int to fill a new buffer for us */ 985 add_sicallback(callstart, sc, NULL); 986 #else 987 /* call it directly */ 988 callstart(sc, NULL); 989 #endif 990 } 991 992 /* 993 * Our interrupt routine 994 */ 995 int 996 bahintr(sc) 997 struct bah_softc *sc; 998 { 999 u_char isr; 1000 int buffer; 1001 int unit; 1002 u_long newsec; 1003 1004 isr = sc->sc_base->status; 1005 if (!(isr & sc->sc_intmask)) 1006 return (0); 1007 1008 #if defined(BAH_DEBUG) && (BAH_DEBUG>1) 1009 printf("%s: intr: status 0x%02x, intmask 0x%02x\n", 1010 sc->sc_dev.dv_xname, isr, sc->sc_intmask); 1011 #endif 1012 1013 if (isr & ARC_POR) { 1014 sc->sc_arccom.ac_anaddr = sc->sc_base->dipswitches; 1015 sc->sc_base->command = ARC_CLR(CLR_POR); 1016 log(LOG_WARNING, "%s: intr: got spurious power on reset int\n", 1017 sc->sc_dev.dv_xname); 1018 } 1019 1020 if (isr & ARC_RECON) { 1021 /* 1022 * we dont need to: 1023 * sc->sc_base->command = ARC_CONF(CONF_LONG); 1024 */ 1025 sc->sc_base->command = ARC_CLR(CLR_RECONFIG); 1026 sc->sc_arccom.ac_if.if_collisions++; 1027 /* 1028 * if more than 2 seconds per reconfig, reset time and counter. 1029 * else 1030 * if more than ARC_EXCESSIVE_RECONFIGS reconfigs since last burst, complain 1031 * and set treshold for warnings to ARC_EXCESSIVE_RECONS_REWARN. 1032 * This allows for, e.g., new stations on the cable, or cable switching as long 1033 * as it is over after (normally) 16 seconds. 1034 * XXX Todo: check timeout bits in status word and double time if necessary. 1035 */ 1036 1037 newsec = time.tv_sec; 1038 if (newsec - sc->sc_recontime > 2*sc->sc_reconcount) { 1039 sc->sc_recontime = newsec; 1040 sc->sc_reconcount = 0; 1041 sc->sc_reconcount_excessive = ARC_EXCESSIVE_RECONS; 1042 } else if (++sc->sc_reconcount > sc->sc_reconcount_excessive) { 1043 sc->sc_reconcount_excessive = 1044 ARC_EXCESSIVE_RECONS_REWARN; 1045 log(LOG_WARNING, 1046 "%s: excessive token losses, cable problem?\n", 1047 sc->sc_dev.dv_xname); 1048 sc->sc_recontime = newsec; 1049 sc->sc_reconcount = 0; 1050 } 1051 } 1052 1053 if (isr & ARC_RI) { 1054 1055 #if defined(BAH_DEBUG) && (BAH_DEBUG > 1) 1056 printf("%s: intr: hard rint, act %ld 2:%ld 3:%ld\n", 1057 sc->sc_dev.dv_xname, 1058 sc->sc_rx_act, sc->sc_bufstat[2], sc->sc_bufstat[3]); 1059 #endif 1060 1061 buffer = sc->sc_rx_act; 1062 sc->sc_rx_packetno = (sc->sc_rx_packetno+1)%256; 1063 sc->sc_bufstat[buffer] = sc->sc_rx_packetno; 1064 1065 if (++sc->sc_rx_fillcount > 1) { 1066 sc->sc_intmask &= ~ARC_RI; 1067 sc->sc_base->status = sc->sc_intmask; 1068 } else { 1069 1070 buffer ^= 1; 1071 sc->sc_rx_act = buffer; 1072 1073 /* 1074 * Start receiver on other receive buffer. 1075 * This also clears the RI interupt flag. 1076 */ 1077 sc->sc_base->command = ARC_RXBC(buffer); 1078 /* we are in the RX intr, so mask is ok for RX */ 1079 1080 #ifdef BAH_DEBUG 1081 printf("%s: started rx for buffer %ld, status 0x%02x\n", 1082 sc->sc_dev.dv_xname, sc->sc_rx_act, 1083 sc->sc_base->status); 1084 #endif 1085 } 1086 1087 #ifdef BAHSOFTCOPY 1088 /* this one starts a soft int to copy out of the hw */ 1089 add_sicallback(bah_srint,sc,NULL); 1090 #else 1091 /* this one does the copy here */ 1092 bah_srint(sc,NULL); 1093 #endif 1094 } 1095 1096 if (isr & sc->sc_intmask & ARC_TA) 1097 bah_tint(sc); 1098 1099 return (1); 1100 } 1101 1102 /* 1103 * Process an ioctl request. 1104 * This code needs some work - it looks pretty ugly. 1105 */ 1106 int 1107 bah_ioctl(ifp, command, data) 1108 register struct ifnet *ifp; 1109 unsigned long command; 1110 caddr_t data; 1111 { 1112 struct bah_softc *sc; 1113 register struct ifaddr *ifa; 1114 int s, error; 1115 1116 error = 0; 1117 sc = bahcd.cd_devs[ifp->if_unit]; 1118 ifa = (struct ifaddr *)data; 1119 s = splimp(); 1120 1121 #if defined(BAH_DEBUG) && (BAH_DEBUG > 2) 1122 printf("%s: ioctl() called, cmd = 0x%x\n", 1123 sc->sc_dev.dv_xname, command); 1124 #endif 1125 1126 switch (command) { 1127 case SIOCSIFADDR: 1128 ifp->if_flags |= IFF_UP; 1129 switch (ifa->ifa_addr->sa_family) { 1130 #ifdef INET 1131 case AF_INET: 1132 bah_init(sc); 1133 sc->sc_arccom.ac_ipaddr = IA_SIN(ifa)->sin_addr; 1134 /*arpwhohas(&sc->sc_arccom, &IA_SIN(ifa)->sin_addr);*/ 1135 break; 1136 #endif 1137 default: 1138 bah_init(sc); 1139 break; 1140 } 1141 1142 case SIOCSIFFLAGS: 1143 if ((ifp->if_flags & IFF_UP) == 0 && 1144 (ifp->if_flags & IFF_RUNNING) != 0) { 1145 /* 1146 * If interface is marked down and it is running, 1147 * then stop it. 1148 */ 1149 bah_stop(sc); 1150 ifp->if_flags &= ~IFF_RUNNING; 1151 } else if ((ifp->if_flags & IFF_UP) != 0 && 1152 (ifp->if_flags & IFF_RUNNING) == 0) { 1153 /* 1154 * If interface is marked up and it is stopped, then 1155 * start it. 1156 */ 1157 bah_init(sc); 1158 } 1159 break; 1160 1161 /* Multicast not supported */ 1162 1163 default: 1164 error = EINVAL; 1165 } 1166 1167 splx(s); 1168 return (error); 1169 } 1170
Indexes created Thu Sep 25 16:09:42 GMT 2025