smc91cxx.c revision 1.43 1 /* $NetBSD: smc91cxx.c,v 1.43 2002/09/28 10:24:46 scw Exp $ */
2
3 /*-
4 * Copyright (c) 1997 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the NetBSD
22 * Foundation, Inc. and its contributors.
23 * 4. Neither the name of The NetBSD Foundation nor the names of its
24 * contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGE.
38 */
39
40 /*
41 * Copyright (c) 1996 Gardner Buchanan <gbuchanan (at) shl.com>
42 * All rights reserved.
43 *
44 * Redistribution and use in source and binary forms, with or without
45 * modification, are permitted provided that the following conditions
46 * are met:
47 * 1. Redistributions of source code must retain the above copyright
48 * notice, this list of conditions and the following disclaimer.
49 * 2. Redistributions in binary form must reproduce the above copyright
50 * notice, this list of conditions and the following disclaimer in the
51 * documentation and/or other materials provided with the distribution.
52 * 3. All advertising materials mentioning features or use of this software
53 * must display the following acknowledgement:
54 * This product includes software developed by Gardner Buchanan.
55 * 4. The name of Gardner Buchanan may not be used to endorse or promote
56 * products derived from this software without specific prior written
57 * permission.
58 *
59 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
60 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
61 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
62 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
63 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
64 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
65 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
66 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
67 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
68 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
69 *
70 * from FreeBSD Id: if_sn.c,v 1.4 1996/03/18 15:47:16 gardner Exp
71 */
72
73 /*
74 * Core driver for the SMC 91Cxx family of Ethernet chips.
75 *
76 * Memory allocation interrupt logic is drived from an SMC 91C90 driver
77 * written for NetBSD/amiga by Michael Hitch.
78 */
79
80 #include <sys/cdefs.h>
81 __KERNEL_RCSID(0, "$NetBSD: smc91cxx.c,v 1.43 2002/09/28 10:24:46 scw Exp $");
82
83 #include "opt_inet.h"
84 #include "opt_ccitt.h"
85 #include "opt_llc.h"
86 #include "opt_ns.h"
87 #include "bpfilter.h"
88 #include "rnd.h"
89
90 #include <sys/param.h>
91 #include <sys/systm.h>
92 #include <sys/mbuf.h>
93 #include <sys/syslog.h>
94 #include <sys/socket.h>
95 #include <sys/device.h>
96 #include <sys/kernel.h>
97 #include <sys/malloc.h>
98 #include <sys/ioctl.h>
99 #include <sys/errno.h>
100 #if NRND > 0
101 #include <sys/rnd.h>
102 #endif
103
104 #include <machine/bus.h>
105 #include <machine/intr.h>
106
107 #include <net/if.h>
108 #include <net/if_dl.h>
109 #include <net/if_ether.h>
110 #include <net/if_media.h>
111
112 #ifdef INET
113 #include <netinet/in.h>
114 #include <netinet/if_inarp.h>
115 #include <netinet/in_systm.h>
116 #include <netinet/in_var.h>
117 #include <netinet/ip.h>
118 #endif
119
120 #ifdef NS
121 #include <netns/ns.h>
122 #include <netns/ns_if.h>
123 #endif
124
125 #if defined(CCITT) && defined(LLC)
126 #include <sys/socketvar.h>
127 #include <netccitt/x25.h>
128 #include <netccitt/pk.h>
129 #include <netccitt/pk_var.h>
130 #include <netccitt/pk_extern.h>
131 #endif
132
133 #if NBPFILTER > 0
134 #include <net/bpf.h>
135 #include <net/bpfdesc.h>
136 #endif
137
138 #include <dev/mii/mii.h>
139 #include <dev/mii/miivar.h>
140 #include <dev/mii/mii_bitbang.h>
141
142 #include <dev/ic/smc91cxxreg.h>
143 #include <dev/ic/smc91cxxvar.h>
144
145 #ifndef __BUS_SPACE_HAS_STREAM_METHODS
146 #define bus_space_write_multi_stream_2 bus_space_write_multi_2
147 #define bus_space_write_multi_stream_4 bus_space_write_multi_4
148 #define bus_space_read_multi_stream_2 bus_space_read_multi_2
149 #define bus_space_read_multi_stream_4 bus_space_read_multi_4
150
151 #define bus_space_write_stream_4 bus_space_write_4
152 #define bus_space_read_stream_4 bus_space_read_4
153 #endif /* __BUS_SPACE_HAS_STREAM_METHODS */
154
155 /* XXX Hardware padding doesn't work yet(?) */
156 #define SMC91CXX_SW_PAD
157
158 const char *smc91cxx_idstrs[] = {
159 NULL, /* 0 */
160 NULL, /* 1 */
161 NULL, /* 2 */
162 "SMC91C90/91C92", /* 3 */
163 "SMC91C94/91C96", /* 4 */
164 "SMC91C95", /* 5 */
165 NULL, /* 6 */
166 "SMC91C100", /* 7 */
167 "SMC91C100FD", /* 8 */
168 NULL, /* 9 */
169 NULL, /* 10 */
170 NULL, /* 11 */
171 NULL, /* 12 */
172 NULL, /* 13 */
173 NULL, /* 14 */
174 NULL, /* 15 */
175 };
176
177 /* Supported media types. */
178 const int smc91cxx_media[] = {
179 IFM_ETHER|IFM_10_T,
180 IFM_ETHER|IFM_10_5,
181 };
182 #define NSMC91CxxMEDIA (sizeof(smc91cxx_media) / sizeof(smc91cxx_media[0]))
183
184 /*
185 * MII bit-bang glue.
186 */
187 u_int32_t smc91cxx_mii_bitbang_read __P((struct device *));
188 void smc91cxx_mii_bitbang_write __P((struct device *, u_int32_t));
189
190 const struct mii_bitbang_ops smc91cxx_mii_bitbang_ops = {
191 smc91cxx_mii_bitbang_read,
192 smc91cxx_mii_bitbang_write,
193 {
194 MR_MDO, /* MII_BIT_MDO */
195 MR_MDI, /* MII_BIT_MDI */
196 MR_MCLK, /* MII_BIT_MDC */
197 MR_MDOE, /* MII_BIT_DIR_HOST_PHY */
198 0, /* MII_BIT_DIR_PHY_HOST */
199 }
200 };
201
202 /* MII callbacks */
203 int smc91cxx_mii_readreg __P((struct device *, int, int));
204 void smc91cxx_mii_writereg __P((struct device *, int, int, int));
205 void smc91cxx_statchg __P((struct device *));
206 void smc91cxx_tick __P((void *));
207
208 int smc91cxx_mediachange __P((struct ifnet *));
209 void smc91cxx_mediastatus __P((struct ifnet *, struct ifmediareq *));
210
211 int smc91cxx_set_media __P((struct smc91cxx_softc *, int));
212
213 void smc91cxx_init __P((struct smc91cxx_softc *));
214 void smc91cxx_read __P((struct smc91cxx_softc *));
215 void smc91cxx_reset __P((struct smc91cxx_softc *));
216 void smc91cxx_start __P((struct ifnet *));
217 void smc91cxx_copy_tx_frame __P((struct smc91cxx_softc *, struct mbuf *));
218 void smc91cxx_resume __P((struct smc91cxx_softc *));
219 void smc91cxx_stop __P((struct smc91cxx_softc *));
220 void smc91cxx_watchdog __P((struct ifnet *));
221 int smc91cxx_ioctl __P((struct ifnet *, u_long, caddr_t));
222
223 static __inline int ether_cmp __P((void *, void *));
224 static __inline int
225 ether_cmp(va, vb)
226 void *va, *vb;
227 {
228 u_int8_t *a = va;
229 u_int8_t *b = vb;
230
231 return ((a[5] != b[5]) || (a[4] != b[4]) || (a[3] != b[3]) ||
232 (a[2] != b[2]) || (a[1] != b[1]) || (a[0] != b[0]));
233 }
234
235 void
236 smc91cxx_attach(sc, myea)
237 struct smc91cxx_softc *sc;
238 u_int8_t *myea;
239 {
240 struct ifnet *ifp = &sc->sc_ec.ec_if;
241 bus_space_tag_t bst = sc->sc_bst;
242 bus_space_handle_t bsh = sc->sc_bsh;
243 struct ifmedia *ifm = &sc->sc_mii.mii_media;
244 const char *idstr;
245 u_int32_t miicapabilities;
246 u_int16_t tmp;
247 u_int8_t enaddr[ETHER_ADDR_LEN];
248 int i, aui, mult, memsize;
249 char pbuf[9];
250
251 /* Make sure the chip is stopped. */
252 smc91cxx_stop(sc);
253
254 SMC_SELECT_BANK(sc, 3);
255 tmp = bus_space_read_2(bst, bsh, REVISION_REG_W);
256 sc->sc_chipid = RR_ID(tmp);
257 /* check magic number */
258 if ((tmp & BSR_DETECT_MASK) != BSR_DETECT_VALUE) {
259 idstr = NULL;
260 printf("%s: invalid BSR 0x%04x\n", sc->sc_dev.dv_xname, tmp);
261 } else
262 idstr = smc91cxx_idstrs[sc->sc_chipid];
263 printf("%s: ", sc->sc_dev.dv_xname);
264 if (idstr != NULL)
265 printf("%s, ", idstr);
266 else
267 printf("unknown chip id %d, ", sc->sc_chipid);
268 printf("revision %d, ", RR_REV(tmp));
269
270 SMC_SELECT_BANK(sc, 0);
271 mult = MCR_MEM_MULT(bus_space_read_2(bst, bsh, MEM_CFG_REG_W));
272 memsize = bus_space_read_2(bst, bsh, MEM_INFO_REG_W) & MIR_TOTAL_MASK;
273 if (memsize == 255) memsize++;
274 memsize *= 256 * mult;
275
276 format_bytes(pbuf, sizeof(pbuf), memsize);
277 printf("buffer size: %s\n", pbuf);
278
279 /* Read the station address from the chip. */
280 SMC_SELECT_BANK(sc, 1);
281 if (myea == NULL) {
282 myea = enaddr;
283 for (i = 0; i < ETHER_ADDR_LEN; i += 2) {
284 tmp = bus_space_read_2(bst, bsh, IAR_ADDR0_REG_W + i);
285 myea[i + 1] = (tmp >> 8) & 0xff;
286 myea[i] = tmp & 0xff;
287 }
288 }
289 printf("%s: MAC address %s, ", sc->sc_dev.dv_xname,
290 ether_sprintf(myea));
291
292 /* Initialize the ifnet structure. */
293 strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
294 ifp->if_softc = sc;
295 ifp->if_start = smc91cxx_start;
296 ifp->if_ioctl = smc91cxx_ioctl;
297 ifp->if_watchdog = smc91cxx_watchdog;
298 ifp->if_flags =
299 IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
300 IFQ_SET_READY(&ifp->if_snd);
301
302 /* Attach the interface. */
303 if_attach(ifp);
304 ether_ifattach(ifp, myea);
305
306 /*
307 * Initialize our media structures and MII info. We will
308 * probe the MII if we are on the SMC91Cxx
309 */
310 sc->sc_mii.mii_ifp = ifp;
311 sc->sc_mii.mii_readreg = smc91cxx_mii_readreg;
312 sc->sc_mii.mii_writereg = smc91cxx_mii_writereg;
313 sc->sc_mii.mii_statchg = smc91cxx_statchg;
314 ifmedia_init(ifm, 0, smc91cxx_mediachange, smc91cxx_mediastatus);
315
316 SMC_SELECT_BANK(sc, 1);
317 tmp = bus_space_read_2(bst, bsh, CONFIG_REG_W);
318
319 miicapabilities = BMSR_MEDIAMASK|BMSR_ANEG;
320 switch (sc->sc_chipid) {
321 case CHIP_91100:
322 /*
323 * The 91100 does not have full-duplex capabilities,
324 * even if the PHY does.
325 */
326 miicapabilities &= ~(BMSR_100TXFDX | BMSR_10TFDX);
327 case CHIP_91100FD:
328 if (tmp & CR_MII_SELECT) {
329 printf("default media MII\n");
330 mii_attach(&sc->sc_dev, &sc->sc_mii, miicapabilities,
331 MII_PHY_ANY, MII_OFFSET_ANY, 0);
332 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
333 ifmedia_add(&sc->sc_mii.mii_media,
334 IFM_ETHER|IFM_NONE, 0, NULL);
335 ifmedia_set(&sc->sc_mii.mii_media,
336 IFM_ETHER|IFM_NONE);
337 } else {
338 ifmedia_set(&sc->sc_mii.mii_media,
339 IFM_ETHER|IFM_AUTO);
340 }
341 sc->sc_flags |= SMC_FLAGS_HAS_MII;
342 break;
343 }
344 /*FALLTHROUGH*/
345 default:
346 printf("default media %s\n", (aui = (tmp & CR_AUI_SELECT)) ?
347 "AUI" : "UTP");
348 for (i = 0; i < NSMC91CxxMEDIA; i++)
349 ifmedia_add(ifm, smc91cxx_media[i], 0, NULL);
350 ifmedia_set(ifm, IFM_ETHER | (aui ? IFM_10_5 : IFM_10_T));
351 break;
352 }
353
354 #if NRND > 0
355 rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname,
356 RND_TYPE_NET, 0);
357 #endif
358
359 /* The attach is successful. */
360 sc->sc_flags |= SMC_FLAGS_ATTACHED;
361 }
362
363 /*
364 * Change media according to request.
365 */
366 int
367 smc91cxx_mediachange(ifp)
368 struct ifnet *ifp;
369 {
370 struct smc91cxx_softc *sc = ifp->if_softc;
371
372 return (smc91cxx_set_media(sc, sc->sc_mii.mii_media.ifm_media));
373 }
374
375 int
376 smc91cxx_set_media(sc, media)
377 struct smc91cxx_softc *sc;
378 int media;
379 {
380 bus_space_tag_t bst = sc->sc_bst;
381 bus_space_handle_t bsh = sc->sc_bsh;
382 u_int16_t tmp;
383
384 /*
385 * If the interface is not currently powered on, just return.
386 * When it is enabled later, smc91cxx_init() will properly set
387 * up the media for us.
388 */
389 if ((sc->sc_flags & SMC_FLAGS_ENABLED) == 0)
390 return (0);
391
392 if (IFM_TYPE(media) != IFM_ETHER)
393 return (EINVAL);
394
395 if (sc->sc_flags & SMC_FLAGS_HAS_MII)
396 return (mii_mediachg(&sc->sc_mii));
397
398 switch (IFM_SUBTYPE(media)) {
399 case IFM_10_T:
400 case IFM_10_5:
401 SMC_SELECT_BANK(sc, 1);
402 tmp = bus_space_read_2(bst, bsh, CONFIG_REG_W);
403 if (IFM_SUBTYPE(media) == IFM_10_5)
404 tmp |= CR_AUI_SELECT;
405 else
406 tmp &= ~CR_AUI_SELECT;
407 bus_space_write_2(bst, bsh, CONFIG_REG_W, tmp);
408 delay(20000); /* XXX is this needed? */
409 break;
410
411 default:
412 return (EINVAL);
413 }
414
415 return (0);
416 }
417
418 /*
419 * Notify the world which media we're using.
420 */
421 void
422 smc91cxx_mediastatus(ifp, ifmr)
423 struct ifnet *ifp;
424 struct ifmediareq *ifmr;
425 {
426 struct smc91cxx_softc *sc = ifp->if_softc;
427 bus_space_tag_t bst = sc->sc_bst;
428 bus_space_handle_t bsh = sc->sc_bsh;
429 u_int16_t tmp;
430
431 if ((sc->sc_flags & SMC_FLAGS_ENABLED) == 0) {
432 ifmr->ifm_active = IFM_ETHER | IFM_NONE;
433 ifmr->ifm_status = 0;
434 return;
435 }
436
437 /*
438 * If we have MII, go ask the PHY what's going on.
439 */
440 if (sc->sc_flags & SMC_FLAGS_HAS_MII) {
441 mii_pollstat(&sc->sc_mii);
442 ifmr->ifm_active = sc->sc_mii.mii_media_active;
443 ifmr->ifm_status = sc->sc_mii.mii_media_status;
444 return;
445 }
446
447 SMC_SELECT_BANK(sc, 1);
448 tmp = bus_space_read_2(bst, bsh, CONFIG_REG_W);
449 ifmr->ifm_active =
450 IFM_ETHER | ((tmp & CR_AUI_SELECT) ? IFM_10_5 : IFM_10_T);
451 }
452
453 /*
454 * Reset and initialize the chip.
455 */
456 void
457 smc91cxx_init(sc)
458 struct smc91cxx_softc *sc;
459 {
460 struct ifnet *ifp = &sc->sc_ec.ec_if;
461 bus_space_tag_t bst = sc->sc_bst;
462 bus_space_handle_t bsh = sc->sc_bsh;
463 u_int16_t tmp;
464 u_int8_t *enaddr;
465 int s, i;
466
467 s = splnet();
468
469 /*
470 * This resets the registersmostly to defaults, but doesn't
471 * affect the EEPROM. After the reset cycle, we pause briefly
472 * for the chip to recover.
473 *
474 * XXX how long are we really supposed to delay? --thorpej
475 */
476 SMC_SELECT_BANK(sc, 0);
477 bus_space_write_2(bst, bsh, RECV_CONTROL_REG_W, RCR_SOFTRESET);
478 delay(100);
479 bus_space_write_2(bst, bsh, RECV_CONTROL_REG_W, 0);
480 delay(200);
481
482 bus_space_write_2(bst, bsh, TXMIT_CONTROL_REG_W, 0);
483
484 /* Set the Ethernet address. */
485 SMC_SELECT_BANK(sc, 1);
486 enaddr = (u_int8_t *)LLADDR(ifp->if_sadl);
487 for (i = 0; i < ETHER_ADDR_LEN; i += 2) {
488 tmp = enaddr[i + 1] << 8 | enaddr[i];
489 bus_space_write_2(bst, bsh, IAR_ADDR0_REG_W + i, tmp);
490 }
491
492 /*
493 * Set the control register to automatically release successfully
494 * transmitted packets (making the best use of our limited memory)
495 * and enable the EPH interrupt on certain TX errors.
496 */
497 bus_space_write_2(bst, bsh, CONTROL_REG_W, (CTR_AUTO_RELEASE |
498 CTR_TE_ENABLE | CTR_CR_ENABLE | CTR_LE_ENABLE));
499
500 /*
501 * Reset the MMU and wait for it to be un-busy.
502 */
503 SMC_SELECT_BANK(sc, 2);
504 bus_space_write_2(bst, bsh, MMU_CMD_REG_W, MMUCR_RESET);
505 while (bus_space_read_2(bst, bsh, MMU_CMD_REG_W) & MMUCR_BUSY)
506 /* XXX bound this loop! */ ;
507
508 /*
509 * Disable all interrupts.
510 */
511 bus_space_write_1(bst, bsh, INTR_MASK_REG_B, 0);
512
513 /*
514 * Set current media.
515 */
516 smc91cxx_set_media(sc, sc->sc_mii.mii_media.ifm_cur->ifm_media);
517
518 /*
519 * Set the receive filter. We want receive enable and auto
520 * strip of CRC from received packet. If we are in promisc. mode,
521 * then set that bit as well.
522 *
523 * XXX Initialize multicast filter. For now, we just accept
524 * XXX all multicast.
525 */
526 SMC_SELECT_BANK(sc, 0);
527
528 tmp = RCR_ENABLE | RCR_STRIP_CRC | RCR_ALMUL;
529 if (ifp->if_flags & IFF_PROMISC)
530 tmp |= RCR_PROMISC;
531
532 bus_space_write_2(bst, bsh, RECV_CONTROL_REG_W, tmp);
533
534 /*
535 * Set transmitter control to "enabled".
536 */
537 tmp = TCR_ENABLE;
538
539 #ifndef SMC91CXX_SW_PAD
540 /*
541 * Enable hardware padding of transmitted packets.
542 * XXX doesn't work?
543 */
544 tmp |= TCR_PAD_ENABLE;
545 #endif
546
547 bus_space_write_2(bst, bsh, TXMIT_CONTROL_REG_W, tmp);
548
549 /*
550 * Now, enable interrupts.
551 */
552 SMC_SELECT_BANK(sc, 2);
553
554 bus_space_write_1(bst, bsh, INTR_MASK_REG_B,
555 IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | IM_TX_INT);
556
557 /* Interface is now running, with no output active. */
558 ifp->if_flags |= IFF_RUNNING;
559 ifp->if_flags &= ~IFF_OACTIVE;
560
561 if (sc->sc_flags & SMC_FLAGS_HAS_MII) {
562 /* Start the one second clock. */
563 callout_reset(&sc->sc_mii_callout, hz, smc91cxx_tick, sc);
564 }
565
566 /*
567 * Attempt to start any pending transmission.
568 */
569 smc91cxx_start(ifp);
570
571 splx(s);
572 }
573
574 /*
575 * Start output on an interface.
576 * Must be called at splnet or interrupt level.
577 */
578 void
579 smc91cxx_start(ifp)
580 struct ifnet *ifp;
581 {
582 struct smc91cxx_softc *sc = ifp->if_softc;
583 bus_space_tag_t bst = sc->sc_bst;
584 bus_space_handle_t bsh = sc->sc_bsh;
585 u_int len;
586 struct mbuf *m;
587 u_int16_t length, npages;
588 u_int8_t packetno;
589 int timo, pad;
590
591 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
592 return;
593
594 again:
595 /*
596 * Peek at the next packet.
597 */
598 IFQ_POLL(&ifp->if_snd, m);
599 if (m == NULL)
600 return;
601
602 /*
603 * Compute the frame length and set pad to give an overall even
604 * number of bytes. Below, we assume that the packet length
605 * is even.
606 */
607 for (len = 0; m != NULL; m = m->m_next)
608 len += m->m_len;
609 pad = (len & 1);
610
611 /*
612 * We drop packets that are too large. Perhaps we should
613 * truncate them instead?
614 */
615 if ((len + pad) > (ETHER_MAX_LEN - ETHER_CRC_LEN)) {
616 printf("%s: large packet discarded\n", sc->sc_dev.dv_xname);
617 ifp->if_oerrors++;
618 IFQ_DEQUEUE(&ifp->if_snd, m);
619 m_freem(m);
620 goto readcheck;
621 }
622
623 #ifdef SMC91CXX_SW_PAD
624 /*
625 * Not using hardware padding; pad to ETHER_MIN_LEN.
626 */
627 if (len < (ETHER_MIN_LEN - ETHER_CRC_LEN))
628 pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len;
629 #endif
630
631 length = pad + len;
632
633 /*
634 * The MMU has a 256 byte page size. The MMU expects us to
635 * ask for "npages - 1". We include space for the status word,
636 * byte count, and control bytes in the allocation request.
637 */
638 npages = (length + 6) >> 8;
639
640 /*
641 * Now allocate the memory.
642 */
643 SMC_SELECT_BANK(sc, 2);
644 bus_space_write_2(bst, bsh, MMU_CMD_REG_W, MMUCR_ALLOC | npages);
645
646 timo = MEMORY_WAIT_TIME;
647 do {
648 if (bus_space_read_1(bst, bsh, INTR_STAT_REG_B) & IM_ALLOC_INT)
649 break;
650 delay(1);
651 } while (--timo);
652
653 packetno = bus_space_read_1(bst, bsh, ALLOC_RESULT_REG_B);
654
655 if (packetno & ARR_FAILED || timo == 0) {
656 /*
657 * No transmit memory is available. Record the number
658 * of requestd pages and enable the allocation completion
659 * interrupt. Set up the watchdog timer in case we miss
660 * the interrupt. Mark the interface as active so that
661 * no one else attempts to transmit while we're allocating
662 * memory.
663 */
664 bus_space_write_1(bst, bsh, INTR_MASK_REG_B,
665 bus_space_read_1(bst, bsh, INTR_MASK_REG_B) | IM_ALLOC_INT);
666
667 ifp->if_timer = 5;
668 ifp->if_flags |= IFF_OACTIVE;
669
670 return;
671 }
672
673 /*
674 * We have a packet number - set the data window.
675 */
676 bus_space_write_1(bst, bsh, PACKET_NUM_REG_B, packetno);
677
678 /*
679 * Point to the beginning of the packet.
680 */
681 bus_space_write_2(bst, bsh, POINTER_REG_W, PTR_AUTOINC /* | 0x0000 */);
682
683 /*
684 * Send the packet length (+6 for stats, length, and control bytes)
685 * and the status word (set to zeros).
686 */
687 bus_space_write_2(bst, bsh, DATA_REG_W, 0);
688 bus_space_write_1(bst, bsh, DATA_REG_B, (length + 6) & 0xff);
689 bus_space_write_1(bst, bsh, DATA_REG_B, ((length + 6) >> 8) & 0xff);
690
691 /*
692 * Get the packet from the kernel. This will include the Ethernet
693 * frame header, MAC address, etc.
694 */
695 IFQ_DEQUEUE(&ifp->if_snd, m);
696
697 /*
698 * Push the packet out to the card.
699 */
700 smc91cxx_copy_tx_frame(sc, m);
701
702 #ifdef SMC91CXX_SW_PAD
703 /*
704 * Push out padding.
705 */
706 while (pad > 1) {
707 bus_space_write_2(bst, bsh, DATA_REG_W, 0);
708 pad -= 2;
709 }
710 if (pad)
711 bus_space_write_1(bst, bsh, DATA_REG_B, 0);
712 #endif
713
714 /*
715 * Push out control byte and unused packet byte. The control byte
716 * is 0, meaning the packet is even lengthed and no special
717 * CRC handling is necessary.
718 */
719 bus_space_write_2(bst, bsh, DATA_REG_W, 0);
720
721 /*
722 * Enable transmit interrupts and let the chip go. Set a watchdog
723 * in case we miss the interrupt.
724 */
725 bus_space_write_1(bst, bsh, INTR_MASK_REG_B,
726 bus_space_read_1(bst, bsh, INTR_MASK_REG_B) |
727 IM_TX_INT | IM_TX_EMPTY_INT);
728
729 bus_space_write_2(bst, bsh, MMU_CMD_REG_W, MMUCR_ENQUEUE);
730
731 ifp->if_timer = 5;
732
733 #if NBPFILTER > 0
734 /* Hand off a copy to the bpf. */
735 if (ifp->if_bpf)
736 bpf_mtap(ifp->if_bpf, m);
737 #endif
738
739 ifp->if_opackets++;
740 m_freem(m);
741
742 readcheck:
743 /*
744 * Check for incoming pcakets. We don't want to overflow the small
745 * RX FIFO. If nothing has arrived, attempt to queue another
746 * transmit packet.
747 */
748 if (bus_space_read_2(bst, bsh, FIFO_PORTS_REG_W) & FIFO_REMPTY)
749 goto again;
750 }
751
752 /*
753 * Squirt a (possibly misaligned) mbuf to the device
754 */
755 void
756 smc91cxx_copy_tx_frame(sc, m0)
757 struct smc91cxx_softc *sc;
758 struct mbuf *m0;
759 {
760 bus_space_tag_t bst = sc->sc_bst;
761 bus_space_handle_t bsh = sc->sc_bsh;
762 struct mbuf *m;
763 int len, leftover;
764 u_int16_t dbuf;
765 u_int8_t *p;
766 #ifdef DIAGNOSTIC
767 u_int8_t *lim;
768 #endif
769
770 /* start out with no leftover data */
771 leftover = 0;
772 dbuf = 0;
773
774 /* Process the chain of mbufs */
775 for (m = m0; m != NULL; m = m->m_next) {
776 /*
777 * Process all of the data in a single mbuf.
778 */
779 p = mtod(m, u_int8_t *);
780 len = m->m_len;
781 #ifdef DIAGNOSTIC
782 lim = p + len;
783 #endif
784
785 while (len > 0) {
786 if (leftover) {
787 /*
788 * Data left over (from mbuf or realignment).
789 * Buffer the next byte, and write it and
790 * the leftover data out.
791 */
792 dbuf |= *p++ << 8;
793 len--;
794 bus_space_write_2(bst, bsh, DATA_REG_W, dbuf);
795 leftover = 0;
796 } else if ((long) p & 1) {
797 /*
798 * Misaligned data. Buffer the next byte.
799 */
800 dbuf = *p++;
801 len--;
802 leftover = 1;
803 } else {
804 /*
805 * Aligned data. This is the case we like.
806 *
807 * Write-region out as much as we can, then
808 * buffer the remaining byte (if any).
809 */
810 leftover = len & 1;
811 len &= ~1;
812 bus_space_write_multi_stream_2(bst, bsh,
813 DATA_REG_W, (u_int16_t *)p, len >> 1);
814 p += len;
815
816 if (leftover)
817 dbuf = *p++;
818 len = 0;
819 }
820 }
821 if (len < 0)
822 panic("smc91cxx_copy_tx_frame: negative len");
823 #ifdef DIAGNOSTIC
824 if (p != lim)
825 panic("smc91cxx_copy_tx_frame: p != lim");
826 #endif
827 }
828 if (leftover)
829 bus_space_write_1(bst, bsh, DATA_REG_B, dbuf);
830 }
831
832 /*
833 * Interrupt service routine.
834 */
835 int
836 smc91cxx_intr(arg)
837 void *arg;
838 {
839 struct smc91cxx_softc *sc = arg;
840 struct ifnet *ifp = &sc->sc_ec.ec_if;
841 bus_space_tag_t bst = sc->sc_bst;
842 bus_space_handle_t bsh = sc->sc_bsh;
843 u_int8_t mask, interrupts, status;
844 u_int16_t packetno, tx_status, card_stats;
845
846 if ((sc->sc_flags & SMC_FLAGS_ENABLED) == 0 ||
847 (sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
848 return (0);
849
850 SMC_SELECT_BANK(sc, 2);
851
852 /*
853 * Obtain the current interrupt mask.
854 */
855 mask = bus_space_read_1(bst, bsh, INTR_MASK_REG_B);
856
857 /*
858 * Get the set of interrupt which occurred and eliminate any
859 * which are not enabled.
860 */
861 interrupts = bus_space_read_1(bst, bsh, INTR_STAT_REG_B);
862 status = interrupts & mask;
863
864 /* Ours? */
865 if (status == 0)
866 return (0);
867
868 /*
869 * It's ours; disable all interrupts while we process them.
870 */
871 bus_space_write_1(bst, bsh, INTR_MASK_REG_B, 0);
872
873 /*
874 * Receive overrun interrupts.
875 */
876 if (status & IM_RX_OVRN_INT) {
877 bus_space_write_1(bst, bsh, INTR_ACK_REG_B, IM_RX_OVRN_INT);
878 ifp->if_ierrors++;
879 }
880
881 /*
882 * Receive interrupts.
883 */
884 if (status & IM_RCV_INT) {
885 #if 1 /* DIAGNOSTIC */
886 packetno = bus_space_read_2(bst, bsh, FIFO_PORTS_REG_W);
887 if (packetno & FIFO_REMPTY) {
888 printf("%s: receive interrupt on empty fifo\n",
889 sc->sc_dev.dv_xname);
890 goto out;
891 } else
892 #endif
893 smc91cxx_read(sc);
894 }
895
896 /*
897 * Memory allocation interrupts.
898 */
899 if (status & IM_ALLOC_INT) {
900 /* Disable this interrupt. */
901 mask &= ~IM_ALLOC_INT;
902
903 /*
904 * Release the just-allocated memory. We will reallocate
905 * it through the normal start logic.
906 */
907 while (bus_space_read_2(bst, bsh, MMU_CMD_REG_W) & MMUCR_BUSY)
908 /* XXX bound this loop! */ ;
909 bus_space_write_2(bst, bsh, MMU_CMD_REG_W, MMUCR_FREEPKT);
910
911 ifp->if_flags &= ~IFF_OACTIVE;
912 ifp->if_timer = 0;
913 }
914
915 /*
916 * Transmit complete interrupt. Handle transmission error messages.
917 * This will only be called on error condition because of AUTO RELEASE
918 * mode.
919 */
920 if (status & IM_TX_INT) {
921 bus_space_write_1(bst, bsh, INTR_ACK_REG_B, IM_TX_INT);
922
923 packetno = bus_space_read_2(bst, bsh, FIFO_PORTS_REG_W) &
924 FIFO_TX_MASK;
925
926 /*
927 * Select this as the packet to read from.
928 */
929 bus_space_write_1(bst, bsh, PACKET_NUM_REG_B, packetno);
930
931 /*
932 * Position the pointer to the beginning of the packet.
933 */
934 bus_space_write_2(bst, bsh, POINTER_REG_W,
935 PTR_AUTOINC | PTR_READ /* | 0x0000 */);
936
937 /*
938 * Fetch the TX status word. This will be a copy of
939 * the EPH_STATUS_REG_W at the time of the transmission
940 * failure.
941 */
942 tx_status = bus_space_read_2(bst, bsh, DATA_REG_W);
943
944 if (tx_status & EPHSR_TX_SUC)
945 printf("%s: successful packet caused TX interrupt?!\n",
946 sc->sc_dev.dv_xname);
947 else
948 ifp->if_oerrors++;
949
950 if (tx_status & EPHSR_LATCOL)
951 ifp->if_collisions++;
952
953 /*
954 * Some of these errors disable the transmitter; reenable it.
955 */
956 SMC_SELECT_BANK(sc, 0);
957 #ifdef SMC91CXX_SW_PAD
958 bus_space_write_2(bst, bsh, TXMIT_CONTROL_REG_W, TCR_ENABLE);
959 #else
960 bus_space_write_2(bst, bsh, TXMIT_CONTROL_REG_W,
961 TCR_ENABLE | TCR_PAD_ENABLE);
962 #endif
963
964 /*
965 * Kill the failed packet and wait for the MMU to unbusy.
966 */
967 SMC_SELECT_BANK(sc, 2);
968 while (bus_space_read_2(bst, bsh, MMU_CMD_REG_W) & MMUCR_BUSY)
969 /* XXX bound this loop! */ ;
970 bus_space_write_2(bst, bsh, MMU_CMD_REG_W, MMUCR_FREEPKT);
971
972 ifp->if_timer = 0;
973 }
974
975 /*
976 * Transmit underrun interrupts. We use this opportunity to
977 * update transmit statistics from the card.
978 */
979 if (status & IM_TX_EMPTY_INT) {
980 bus_space_write_1(bst, bsh, INTR_ACK_REG_B, IM_TX_EMPTY_INT);
981
982 /* Disable this interrupt. */
983 mask &= ~IM_TX_EMPTY_INT;
984
985 SMC_SELECT_BANK(sc, 0);
986 card_stats = bus_space_read_2(bst, bsh, COUNTER_REG_W);
987
988 /* Single collisions. */
989 ifp->if_collisions += card_stats & ECR_COLN_MASK;
990
991 /* Multiple collisions. */
992 ifp->if_collisions += (card_stats & ECR_MCOLN_MASK) >> 4;
993
994 SMC_SELECT_BANK(sc, 2);
995
996 ifp->if_timer = 0;
997 }
998
999 /*
1000 * Other errors. Reset the interface.
1001 */
1002 if (status & IM_EPH_INT) {
1003 smc91cxx_stop(sc);
1004 smc91cxx_init(sc);
1005 }
1006
1007 /*
1008 * Attempt to queue more packets for transmission.
1009 */
1010 smc91cxx_start(ifp);
1011
1012 out:
1013 /*
1014 * Reenable the interrupts we wish to receive now that processing
1015 * is complete.
1016 */
1017 mask |= bus_space_read_1(bst, bsh, INTR_MASK_REG_B);
1018 bus_space_write_1(bst, bsh, INTR_MASK_REG_B, mask);
1019
1020 #if NRND > 0
1021 if (status)
1022 rnd_add_uint32(&sc->rnd_source, status);
1023 #endif
1024
1025 return (1);
1026 }
1027
1028 /*
1029 * Read a packet from the card and pass it up to the kernel.
1030 * NOTE! WE EXPECT TO BE IN REGISTER WINDOW 2!
1031 */
1032 void
1033 smc91cxx_read(sc)
1034 struct smc91cxx_softc *sc;
1035 {
1036 struct ifnet *ifp = &sc->sc_ec.ec_if;
1037 bus_space_tag_t bst = sc->sc_bst;
1038 bus_space_handle_t bsh = sc->sc_bsh;
1039 struct ether_header *eh;
1040 struct mbuf *m;
1041 u_int16_t status, packetno, packetlen;
1042 u_int8_t *data;
1043 u_int32_t dr;
1044
1045 again:
1046 /*
1047 * Set data pointer to the beginning of the packet. Since
1048 * PTR_RCV is set, the packet number will be found automatically
1049 * in FIFO_PORTS_REG_W, FIFO_RX_MASK.
1050 */
1051 bus_space_write_2(bst, bsh, POINTER_REG_W,
1052 PTR_READ | PTR_RCV | PTR_AUTOINC /* | 0x0000 */);
1053
1054 /*
1055 * First two words are status and packet length.
1056 */
1057 if ((sc->sc_flags & SMC_FLAGS_32BIT_READ) == 0) {
1058 status = bus_space_read_2(bst, bsh, DATA_REG_W);
1059 packetlen = bus_space_read_2(bst, bsh, DATA_REG_W);
1060 } else {
1061 dr = bus_space_read_4(bst, bsh, DATA_REG_W);
1062 #if BYTE_ORDER == LITTLE_ENDIAN
1063 status = (u_int16_t)dr;
1064 packetlen = (u_int16_t)(dr >> 16);
1065 #else
1066 packetlen = (u_int16_t)dr;
1067 status = (u_int16_t)(dr >> 16);
1068 #endif
1069 }
1070
1071 packetlen &= RLEN_MASK;
1072
1073 /*
1074 * The packet length includes 3 extra words: status, length,
1075 * and an extra word that includes the control byte.
1076 */
1077 packetlen -= 6;
1078
1079 /*
1080 * Account for receive errors and discard.
1081 */
1082 if (status & RS_ERRORS) {
1083 ifp->if_ierrors++;
1084 goto out;
1085 }
1086
1087 /*
1088 * Adjust for odd-length packet.
1089 */
1090 if (status & RS_ODDFRAME)
1091 packetlen++;
1092
1093 /*
1094 * Allocate a header mbuf.
1095 */
1096 MGETHDR(m, M_DONTWAIT, MT_DATA);
1097 if (m == NULL)
1098 goto out;
1099 m->m_pkthdr.rcvif = ifp;
1100 m->m_pkthdr.len = packetlen;
1101
1102 /*
1103 * Always put the packet in a cluster.
1104 * XXX should chain small mbufs if less than threshold.
1105 */
1106 MCLGET(m, M_DONTWAIT);
1107 if ((m->m_flags & M_EXT) == 0) {
1108 m_freem(m);
1109 ifp->if_ierrors++;
1110 printf("%s: can't allocate cluster for incoming packet\n",
1111 sc->sc_dev.dv_xname);
1112 goto out;
1113 }
1114
1115 /*
1116 * Pull the packet off the interface. Make sure the payload
1117 * is aligned.
1118 */
1119 if ((sc->sc_flags & SMC_FLAGS_32BIT_READ) == 0) {
1120 m->m_data = (caddr_t) ALIGN(mtod(m, caddr_t) +
1121 sizeof(struct ether_header)) - sizeof(struct ether_header);
1122
1123 eh = mtod(m, struct ether_header *);
1124 data = mtod(m, u_int8_t *);
1125 if (packetlen > 1)
1126 bus_space_read_multi_stream_2(bst, bsh, DATA_REG_W,
1127 (u_int16_t *)data, packetlen >> 1);
1128 if (packetlen & 1) {
1129 data += packetlen & ~1;
1130 *data = bus_space_read_1(bst, bsh, DATA_REG_B);
1131 }
1132 } else {
1133 u_int8_t *dp;
1134
1135 m->m_data = (caddr_t) ALIGN(mtod(m, caddr_t));
1136 eh = mtod(m, struct ether_header *);
1137 dp = data = mtod(m, u_int8_t *);
1138 if (packetlen > 3)
1139 bus_space_read_multi_stream_4(bst, bsh, DATA_REG_W,
1140 (u_int32_t *)data, packetlen >> 2);
1141 if (packetlen & 3) {
1142 data += packetlen & ~3;
1143 *((u_int32_t *)data) =
1144 bus_space_read_stream_4(bst, bsh, DATA_REG_W);
1145 }
1146 }
1147
1148 ifp->if_ipackets++;
1149
1150 /*
1151 * Make sure to behave as IFF_SIMPLEX in all cases.
1152 * This is to cope with SMC91C92 (Megahertz XJ10BT), which
1153 * loops back packets to itself on promiscuous mode.
1154 * (should be ensured by chipset configuration)
1155 */
1156 if ((ifp->if_flags & IFF_PROMISC) != 0) {
1157 /*
1158 * Drop packet looped back from myself.
1159 */
1160 if (ether_cmp(eh->ether_shost, LLADDR(ifp->if_sadl)) == 0) {
1161 m_freem(m);
1162 goto out;
1163 }
1164 }
1165
1166 m->m_pkthdr.len = m->m_len = packetlen;
1167
1168 #if NBPFILTER > 0
1169 /*
1170 * Hand the packet off to bpf listeners.
1171 */
1172 if (ifp->if_bpf)
1173 bpf_mtap(ifp->if_bpf, m);
1174 #endif
1175
1176 (*ifp->if_input)(ifp, m);
1177
1178 out:
1179 /*
1180 * Tell the card to free the memory occupied by this packet.
1181 */
1182 while (bus_space_read_2(bst, bsh, MMU_CMD_REG_W) & MMUCR_BUSY)
1183 /* XXX bound this loop! */ ;
1184 bus_space_write_2(bst, bsh, MMU_CMD_REG_W, MMUCR_RELEASE);
1185
1186 /*
1187 * Check for another packet.
1188 */
1189 packetno = bus_space_read_2(bst, bsh, FIFO_PORTS_REG_W);
1190 if (packetno & FIFO_REMPTY)
1191 return;
1192 goto again;
1193 }
1194
1195 /*
1196 * Process an ioctl request.
1197 */
1198 int
1199 smc91cxx_ioctl(ifp, cmd, data)
1200 struct ifnet *ifp;
1201 u_long cmd;
1202 caddr_t data;
1203 {
1204 struct smc91cxx_softc *sc = ifp->if_softc;
1205 struct ifaddr *ifa = (struct ifaddr *)data;
1206 struct ifreq *ifr = (struct ifreq *)data;
1207 int s, error = 0;
1208
1209 s = splnet();
1210
1211 switch (cmd) {
1212 case SIOCSIFADDR:
1213 if ((error = smc91cxx_enable(sc)) != 0)
1214 break;
1215 ifp->if_flags |= IFF_UP;
1216 switch (ifa->ifa_addr->sa_family) {
1217 #ifdef INET
1218 case AF_INET:
1219 smc91cxx_init(sc);
1220 arp_ifinit(ifp, ifa);
1221 break;
1222 #endif
1223 #ifdef NS
1224 case AF_NS:
1225 {
1226 struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
1227
1228 if (ns_nullhost(*ina))
1229 ina->x_host =
1230 *(union ns_host *)LLADDR(ifp->if_sadl);
1231 else {
1232 memcpy(LLADDR(ifp->if_sadl), ina->x_host.c_host,
1233 ETHER_ADDR_LEN);
1234 }
1235
1236 /*
1237 * Set new address. Reset, because the receiver
1238 * has to be stopped before we can set the new
1239 * MAC address.
1240 */
1241 smc91cxx_reset(sc);
1242 break;
1243 }
1244 #endif
1245 default:
1246 smc91cxx_init(sc);
1247 break;
1248 }
1249 break;
1250
1251 #if defined(CCITT) && defined(LLC)
1252 case SIOCSIFCONF_X25:
1253 if ((error = smc91cxx_enable(sc)) != 0)
1254 break;
1255 ifp->if_flags |= IFF_UP;
1256 ifa->ifa_rtrequest = cons_rtrequest; /* XXX */
1257 error = x25_llcglue(PRC_IFUP, ifa->ifa_addr);
1258 if (error == 0)
1259 smc91cxx_init(sc);
1260 break;
1261 #endif
1262
1263 case SIOCSIFFLAGS:
1264 if ((ifp->if_flags & IFF_UP) == 0 &&
1265 (ifp->if_flags & IFF_RUNNING) != 0) {
1266 /*
1267 * If interface is marked down and it is running,
1268 * stop it.
1269 */
1270 smc91cxx_stop(sc);
1271 ifp->if_flags &= ~IFF_RUNNING;
1272 smc91cxx_disable(sc);
1273 } else if ((ifp->if_flags & IFF_UP) != 0 &&
1274 (ifp->if_flags & IFF_RUNNING) == 0) {
1275 /*
1276 * If interface is marked up and it is stopped,
1277 * start it.
1278 */
1279 if ((error = smc91cxx_enable(sc)) != 0)
1280 break;
1281 smc91cxx_init(sc);
1282 } else if ((ifp->if_flags & IFF_UP) != 0) {
1283 /*
1284 * Reset the interface to pick up changes in any
1285 * other flags that affect hardware registers.
1286 */
1287 smc91cxx_reset(sc);
1288 }
1289 break;
1290
1291 case SIOCADDMULTI:
1292 case SIOCDELMULTI:
1293 if ((sc->sc_flags & SMC_FLAGS_ENABLED) == 0) {
1294 error = EIO;
1295 break;
1296 }
1297
1298 error = (cmd == SIOCADDMULTI) ?
1299 ether_addmulti(ifr, &sc->sc_ec) :
1300 ether_delmulti(ifr, &sc->sc_ec);
1301 if (error == ENETRESET) {
1302 /*
1303 * Multicast list has changed; set the hardware
1304 * filter accordingly.
1305 */
1306 smc91cxx_reset(sc);
1307 error = 0;
1308 }
1309 break;
1310
1311 case SIOCGIFMEDIA:
1312 case SIOCSIFMEDIA:
1313 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
1314 break;
1315
1316 default:
1317 error = EINVAL;
1318 break;
1319 }
1320
1321 splx(s);
1322 return (error);
1323 }
1324
1325 /*
1326 * Reset the interface.
1327 */
1328 void
1329 smc91cxx_reset(sc)
1330 struct smc91cxx_softc *sc;
1331 {
1332 int s;
1333
1334 s = splnet();
1335 smc91cxx_stop(sc);
1336 smc91cxx_init(sc);
1337 splx(s);
1338 }
1339
1340 /*
1341 * Watchdog timer.
1342 */
1343 void
1344 smc91cxx_watchdog(ifp)
1345 struct ifnet *ifp;
1346 {
1347 struct smc91cxx_softc *sc = ifp->if_softc;
1348
1349 log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname);
1350 ifp->if_oerrors++;
1351 smc91cxx_reset(sc);
1352 }
1353
1354 /*
1355 * Stop output on the interface.
1356 */
1357 void
1358 smc91cxx_stop(sc)
1359 struct smc91cxx_softc *sc;
1360 {
1361 bus_space_tag_t bst = sc->sc_bst;
1362 bus_space_handle_t bsh = sc->sc_bsh;
1363
1364 /*
1365 * Clear interrupt mask; disable all interrupts.
1366 */
1367 SMC_SELECT_BANK(sc, 2);
1368 bus_space_write_1(bst, bsh, INTR_MASK_REG_B, 0);
1369
1370 /*
1371 * Disable transmitter and receiver.
1372 */
1373 SMC_SELECT_BANK(sc, 0);
1374 bus_space_write_2(bst, bsh, RECV_CONTROL_REG_W, 0);
1375 bus_space_write_2(bst, bsh, TXMIT_CONTROL_REG_W, 0);
1376
1377 /*
1378 * Cancel watchdog timer.
1379 */
1380 sc->sc_ec.ec_if.if_timer = 0;
1381 }
1382
1383 /*
1384 * Enable power on the interface.
1385 */
1386 int
1387 smc91cxx_enable(sc)
1388 struct smc91cxx_softc *sc;
1389 {
1390
1391 if ((sc->sc_flags & SMC_FLAGS_ENABLED) == 0 && sc->sc_enable != NULL) {
1392 if ((*sc->sc_enable)(sc) != 0) {
1393 printf("%s: device enable failed\n",
1394 sc->sc_dev.dv_xname);
1395 return (EIO);
1396 }
1397 }
1398
1399 sc->sc_flags |= SMC_FLAGS_ENABLED;
1400 return (0);
1401 }
1402
1403 /*
1404 * Disable power on the interface.
1405 */
1406 void
1407 smc91cxx_disable(sc)
1408 struct smc91cxx_softc *sc;
1409 {
1410
1411 if ((sc->sc_flags & SMC_FLAGS_ENABLED) != 0 && sc->sc_disable != NULL) {
1412 (*sc->sc_disable)(sc);
1413 sc->sc_flags &= ~SMC_FLAGS_ENABLED;
1414 }
1415 }
1416
1417 int
1418 smc91cxx_activate(self, act)
1419 struct device *self;
1420 enum devact act;
1421 {
1422 struct smc91cxx_softc *sc = (struct smc91cxx_softc *)self;
1423 int rv = 0, s;
1424
1425 s = splnet();
1426 switch (act) {
1427 case DVACT_ACTIVATE:
1428 rv = EOPNOTSUPP;
1429 break;
1430
1431 case DVACT_DEACTIVATE:
1432 if_deactivate(&sc->sc_ec.ec_if);
1433 break;
1434 }
1435 splx(s);
1436 return (rv);
1437 }
1438
1439 int
1440 smc91cxx_detach(self, flags)
1441 struct device *self;
1442 int flags;
1443 {
1444 struct smc91cxx_softc *sc = (struct smc91cxx_softc *)self;
1445 struct ifnet *ifp = &sc->sc_ec.ec_if;
1446
1447 /* Succeed now if there's no work to do. */
1448 if ((sc->sc_flags & SMC_FLAGS_ATTACHED) == 0)
1449 return (0);
1450
1451
1452 /* smc91cxx_disable() checks SMC_FLAGS_ENABLED */
1453 smc91cxx_disable(sc);
1454
1455 /* smc91cxx_attach() never fails */
1456
1457 /* Delete all media. */
1458 ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY);
1459
1460 #if NRND > 0
1461 rnd_detach_source(&sc->rnd_source);
1462 #endif
1463 ether_ifdetach(ifp);
1464 if_detach(ifp);
1465
1466 return (0);
1467 }
1468
1469 u_int32_t
1470 smc91cxx_mii_bitbang_read(self)
1471 struct device *self;
1472 {
1473 struct smc91cxx_softc *sc = (void *) self;
1474
1475 /* We're already in bank 3. */
1476 return (bus_space_read_2(sc->sc_bst, sc->sc_bsh, MGMT_REG_W));
1477 }
1478
1479 void
1480 smc91cxx_mii_bitbang_write(self, val)
1481 struct device *self;
1482 u_int32_t val;
1483 {
1484 struct smc91cxx_softc *sc = (void *) self;
1485
1486 /* We're already in bank 3. */
1487 bus_space_write_2(sc->sc_bst, sc->sc_bsh, MGMT_REG_W, val);
1488 }
1489
1490 int
1491 smc91cxx_mii_readreg(self, phy, reg)
1492 struct device *self;
1493 int phy, reg;
1494 {
1495 struct smc91cxx_softc *sc = (void *) self;
1496 int val;
1497
1498 SMC_SELECT_BANK(sc, 3);
1499
1500 val = mii_bitbang_readreg(self, &smc91cxx_mii_bitbang_ops, phy, reg);
1501
1502 SMC_SELECT_BANK(sc, 2);
1503
1504 return (val);
1505 }
1506
1507 void
1508 smc91cxx_mii_writereg(self, phy, reg, val)
1509 struct device *self;
1510 int phy, reg, val;
1511 {
1512 struct smc91cxx_softc *sc = (void *) self;
1513
1514 SMC_SELECT_BANK(sc, 3);
1515
1516 mii_bitbang_writereg(self, &smc91cxx_mii_bitbang_ops, phy, reg, val);
1517
1518 SMC_SELECT_BANK(sc, 2);
1519 }
1520
1521 void
1522 smc91cxx_statchg(self)
1523 struct device *self;
1524 {
1525 struct smc91cxx_softc *sc = (struct smc91cxx_softc *)self;
1526 bus_space_tag_t bst = sc->sc_bst;
1527 bus_space_handle_t bsh = sc->sc_bsh;
1528 int mctl;
1529
1530 SMC_SELECT_BANK(sc, 0);
1531 mctl = bus_space_read_2(bst, bsh, TXMIT_CONTROL_REG_W);
1532 if (sc->sc_mii.mii_media_active & IFM_FDX)
1533 mctl |= TCR_SWFDUP;
1534 else
1535 mctl &= ~TCR_SWFDUP;
1536 bus_space_write_2(bst, bsh, TXMIT_CONTROL_REG_W, mctl);
1537 SMC_SELECT_BANK(sc, 2); /* back to operating window */
1538 }
1539
1540 /*
1541 * One second timer, used to tick the MII.
1542 */
1543 void
1544 smc91cxx_tick(arg)
1545 void *arg;
1546 {
1547 struct smc91cxx_softc *sc = arg;
1548 int s;
1549
1550 #ifdef DIAGNOSTIC
1551 if ((sc->sc_flags & SMC_FLAGS_HAS_MII) == 0)
1552 panic("smc91cxx_tick");
1553 #endif
1554
1555 if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
1556 return;
1557
1558 s = splnet();
1559 mii_tick(&sc->sc_mii);
1560 splx(s);
1561
1562 callout_reset(&sc->sc_mii_callout, hz, smc91cxx_tick, sc);
1563 }
1564
1565