smc93cx6var.h revision 1.5 1 /* $NetBSD: smc93cx6var.h,v 1.5 2000/03/15 02:08:31 fvdl Exp $ */
2
3 /*
4 * Interface to the 93C46 serial EEPROM that is used to store BIOS
5 * settings for the aic7xxx based adaptec SCSI controllers. It can
6 * also be used for 93C26 and 93C06 serial EEPROMS.
7 *
8 * Copyright (c) 1994, 1995 Justin T. Gibbs.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * the GNU Public License ("GPL").
22 *
23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * SUCH DAMAGE.
34 *
35 * $FreeBSD: src/sys/dev/aic7xxx/aic7xxx.c,v 1.40 2000/01/07 23:08:17 gibbs Exp $
36 */
37
38 #include <sys/param.h>
39 #if !defined(__NetBSD__)
40 #include <sys/systm.h>
41 #endif
42
43 typedef enum {
44 C46 = 6,
45 C56_66 = 8
46 } seeprom_chip_t;
47
48 struct seeprom_descriptor {
49 bus_space_tag_t sd_tag;
50 bus_space_handle_t sd_bsh;
51 bus_size_t sd_control_offset;
52 bus_size_t sd_status_offset;
53 bus_size_t sd_dataout_offset;
54 seeprom_chip_t sd_chip;
55 u_int16_t sd_MS;
56 u_int16_t sd_RDY;
57 u_int16_t sd_CS;
58 u_int16_t sd_CK;
59 u_int16_t sd_DO;
60 u_int16_t sd_DI;
61 };
62
63 /*
64 * This function will read count 16-bit words from the serial EEPROM and
65 * return their value in buf. The port address of the aic7xxx serial EEPROM
66 * control register is passed in as offset. The following parameters are
67 * also passed in:
68 *
69 * CS - Chip select
70 * CK - Clock
71 * DO - Data out
72 * DI - Data in
73 * RDY - SEEPROM ready
74 * MS - Memory port mode select
75 *
76 * A failed read attempt returns 0, and a successful read returns 1.
77 */
78
79 #define SEEPROM_INB(sd) \
80 bus_space_read_1(sd->sd_tag, sd->sd_bsh, sd->sd_control_offset)
81 #define SEEPROM_OUTB(sd, value) \
82 bus_space_write_1(sd->sd_tag, sd->sd_bsh, sd->sd_control_offset, value)
83 #define SEEPROM_STATUS_INB(sd) \
84 bus_space_read_1(sd->sd_tag, sd->sd_bsh, sd->sd_status_offset)
85 #define SEEPROM_DATA_INB(sd) \
86 bus_space_read_1(sd->sd_tag, sd->sd_bsh, sd->sd_dataout_offset)
87
88 int read_seeprom(struct seeprom_descriptor *sd, u_int16_t *buf,
89 bus_size_t start_addr, bus_size_t count);
90