Home | History | Annotate | Line # | Download | only in ic
wdc.c revision 1.279
      1  1.279    martin /*	$NetBSD: wdc.c,v 1.279 2013/09/15 16:08:28 martin Exp $ */
      2   1.31    bouyer 
      3   1.31    bouyer /*
      4  1.137    bouyer  * Copyright (c) 1998, 2001, 2003 Manuel Bouyer.  All rights reserved.
      5   1.31    bouyer  *
      6   1.31    bouyer  * Redistribution and use in source and binary forms, with or without
      7   1.31    bouyer  * modification, are permitted provided that the following conditions
      8   1.31    bouyer  * are met:
      9   1.31    bouyer  * 1. Redistributions of source code must retain the above copyright
     10   1.31    bouyer  *    notice, this list of conditions and the following disclaimer.
     11   1.31    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12   1.31    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13   1.31    bouyer  *    documentation and/or other materials provided with the distribution.
     14   1.31    bouyer  *
     15   1.31    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16   1.31    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17   1.31    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18   1.31    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19   1.31    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20   1.31    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21   1.31    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22   1.31    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23   1.31    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24   1.31    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25   1.31    bouyer  */
     26    1.2    bouyer 
     27   1.27   mycroft /*-
     28  1.220   mycroft  * Copyright (c) 1998, 2003, 2004 The NetBSD Foundation, Inc.
     29   1.27   mycroft  * All rights reserved.
     30    1.2    bouyer  *
     31   1.27   mycroft  * This code is derived from software contributed to The NetBSD Foundation
     32   1.27   mycroft  * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer.
     33   1.12       cgd  *
     34    1.2    bouyer  * Redistribution and use in source and binary forms, with or without
     35    1.2    bouyer  * modification, are permitted provided that the following conditions
     36    1.2    bouyer  * are met:
     37    1.2    bouyer  * 1. Redistributions of source code must retain the above copyright
     38    1.2    bouyer  *    notice, this list of conditions and the following disclaimer.
     39    1.2    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     40    1.2    bouyer  *    notice, this list of conditions and the following disclaimer in the
     41    1.2    bouyer  *    documentation and/or other materials provided with the distribution.
     42    1.2    bouyer  *
     43   1.27   mycroft  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     44   1.27   mycroft  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     45   1.27   mycroft  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     46   1.27   mycroft  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     47   1.27   mycroft  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     48   1.27   mycroft  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     49   1.27   mycroft  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     50   1.27   mycroft  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     51   1.27   mycroft  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     52   1.27   mycroft  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     53   1.27   mycroft  * POSSIBILITY OF SUCH DAMAGE.
     54    1.2    bouyer  */
     55    1.2    bouyer 
     56   1.12       cgd /*
     57   1.12       cgd  * CODE UNTESTED IN THE CURRENT REVISION:
     58   1.12       cgd  */
     59  1.100     lukem 
     60  1.100     lukem #include <sys/cdefs.h>
     61  1.279    martin __KERNEL_RCSID(0, "$NetBSD: wdc.c,v 1.279 2013/09/15 16:08:28 martin Exp $");
     62   1.12       cgd 
     63  1.247    dyoung #include "opt_ata.h"
     64  1.263    bouyer #include "opt_wdc.h"
     65   1.31    bouyer 
     66    1.2    bouyer #include <sys/param.h>
     67    1.2    bouyer #include <sys/systm.h>
     68    1.2    bouyer #include <sys/kernel.h>
     69    1.2    bouyer #include <sys/conf.h>
     70    1.2    bouyer #include <sys/buf.h>
     71   1.31    bouyer #include <sys/device.h>
     72    1.2    bouyer #include <sys/malloc.h>
     73    1.2    bouyer #include <sys/syslog.h>
     74    1.2    bouyer #include <sys/proc.h>
     75    1.2    bouyer 
     76  1.249        ad #include <sys/intr.h>
     77  1.249        ad #include <sys/bus.h>
     78    1.2    bouyer 
     79   1.17  sakamoto #ifndef __BUS_SPACE_HAS_STREAM_METHODS
     80   1.31    bouyer #define bus_space_write_multi_stream_2	bus_space_write_multi_2
     81   1.31    bouyer #define bus_space_write_multi_stream_4	bus_space_write_multi_4
     82   1.31    bouyer #define bus_space_read_multi_stream_2	bus_space_read_multi_2
     83   1.31    bouyer #define bus_space_read_multi_stream_4	bus_space_read_multi_4
     84  1.246  sborrill #define bus_space_read_stream_2	bus_space_read_2
     85  1.246  sborrill #define bus_space_read_stream_4	bus_space_read_4
     86  1.246  sborrill #define bus_space_write_stream_2	bus_space_write_2
     87  1.246  sborrill #define bus_space_write_stream_4	bus_space_write_4
     88   1.17  sakamoto #endif /* __BUS_SPACE_HAS_STREAM_METHODS */
     89   1.16  sakamoto 
     90  1.103    bouyer #include <dev/ata/atavar.h>
     91   1.31    bouyer #include <dev/ata/atareg.h>
     92  1.239    bouyer #include <dev/ata/satareg.h>
     93  1.239    bouyer #include <dev/ata/satavar.h>
     94   1.12       cgd #include <dev/ic/wdcreg.h>
     95   1.12       cgd #include <dev/ic/wdcvar.h>
     96   1.31    bouyer 
     97  1.137    bouyer #include "locators.h"
     98  1.137    bouyer 
     99    1.2    bouyer #include "atapibus.h"
    100  1.106    bouyer #include "wd.h"
    101  1.240    bouyer #include "sata.h"
    102    1.2    bouyer 
    103   1.31    bouyer #define WDCDELAY  100 /* 100 microseconds */
    104   1.31    bouyer #define WDCNDELAY_RST (WDC_RESET_WAIT * 1000 / WDCDELAY)
    105    1.2    bouyer #if 0
    106   1.31    bouyer /* If you enable this, it will report any delays more than WDCDELAY * N long. */
    107    1.2    bouyer #define WDCNDELAY_DEBUG	50
    108    1.2    bouyer #endif
    109    1.2    bouyer 
    110  1.137    bouyer /* When polling wait that much and then tsleep for 1/hz seconds */
    111  1.219     perry #define WDCDELAY_POLL 1 /* ms */
    112  1.137    bouyer 
    113  1.137    bouyer /* timeout for the control commands */
    114  1.137    bouyer #define WDC_CTRL_DELAY 10000 /* 10s, for the recall command */
    115  1.137    bouyer 
    116  1.224    bouyer /*
    117  1.224    bouyer  * timeout when waiting for BSY to deassert when probing.
    118  1.224    bouyer  * set to 5s. From the standards this could be up to 31, but we can't
    119  1.261       snj  * wait that much at boot time, and 5s seems to be enough.
    120  1.224    bouyer  */
    121  1.224    bouyer #define WDC_PROBE_WAIT 5
    122  1.224    bouyer 
    123  1.224    bouyer 
    124  1.106    bouyer #if NWD > 0
    125  1.103    bouyer extern const struct ata_bustype wdc_ata_bustype; /* in ata_wdc.c */
    126  1.106    bouyer #else
    127  1.106    bouyer /* A fake one, the autoconfig will print "wd at foo ... not configured */
    128  1.106    bouyer const struct ata_bustype wdc_ata_bustype = {
    129  1.106    bouyer 	SCSIPI_BUSTYPE_ATA,
    130  1.214     enami 	NULL,				/* wdc_ata_bio */
    131  1.214     enami 	NULL,				/* wdc_reset_drive */
    132  1.214     enami 	wdc_reset_channel,
    133  1.214     enami 	wdc_exec_command,
    134  1.214     enami 	NULL,				/* ata_get_params */
    135  1.214     enami 	NULL,				/* wdc_ata_addref */
    136  1.214     enami 	NULL,				/* wdc_ata_delref */
    137  1.214     enami 	NULL				/* ata_kill_pending */
    138  1.106    bouyer };
    139  1.106    bouyer #endif
    140  1.102    bouyer 
    141  1.213   thorpej /* Flags to wdcreset(). */
    142  1.213   thorpej #define	RESET_POLL	1
    143  1.213   thorpej #define	RESET_SLEEP	0	/* wdcreset() will use tsleep() */
    144  1.213   thorpej 
    145  1.213   thorpej static int	wdcprobe1(struct ata_channel *, int);
    146  1.213   thorpej static int	wdcreset(struct ata_channel *, int);
    147  1.222  christos static void	__wdcerror(struct ata_channel *, const char *);
    148  1.205   thorpej static int	__wdcwait_reset(struct ata_channel *, int, int);
    149  1.205   thorpej static void	__wdccommand_done(struct ata_channel *, struct ata_xfer *);
    150  1.205   thorpej static void	__wdccommand_done_end(struct ata_channel *, struct ata_xfer *);
    151  1.205   thorpej static void	__wdccommand_kill_xfer(struct ata_channel *,
    152  1.182    bouyer 			               struct ata_xfer *, int);
    153  1.205   thorpej static void	__wdccommand_start(struct ata_channel *, struct ata_xfer *);
    154  1.205   thorpej static int	__wdccommand_intr(struct ata_channel *, struct ata_xfer *, int);
    155  1.205   thorpej static int	__wdcwait(struct ata_channel *, int, int, int);
    156   1.31    bouyer 
    157  1.213   thorpej static void	wdc_datain_pio(struct ata_channel *, int, void *, size_t);
    158  1.213   thorpej static void	wdc_dataout_pio(struct ata_channel *, int, void *, size_t);
    159   1.31    bouyer #define DEBUG_INTR   0x01
    160   1.31    bouyer #define DEBUG_XFERS  0x02
    161   1.31    bouyer #define DEBUG_STATUS 0x04
    162   1.31    bouyer #define DEBUG_FUNCS  0x08
    163   1.31    bouyer #define DEBUG_PROBE  0x10
    164   1.74     enami #define DEBUG_DETACH 0x20
    165   1.87    bouyer #define DEBUG_DELAY  0x40
    166  1.204   thorpej #ifdef ATADEBUG
    167  1.204   thorpej extern int atadebug_mask; /* init'ed in ata.c */
    168   1.31    bouyer int wdc_nxfer = 0;
    169  1.204   thorpej #define ATADEBUG_PRINT(args, level)  if (atadebug_mask & (level)) printf args
    170    1.2    bouyer #else
    171  1.204   thorpej #define ATADEBUG_PRINT(args, level)
    172    1.2    bouyer #endif
    173    1.2    bouyer 
    174  1.162   thorpej /*
    175  1.176   thorpej  * Initialize the "shadow register" handles for a standard wdc controller.
    176  1.176   thorpej  */
    177  1.176   thorpej void
    178  1.205   thorpej wdc_init_shadow_regs(struct ata_channel *chp)
    179  1.176   thorpej {
    180  1.206   thorpej 	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(chp);
    181  1.176   thorpej 
    182  1.205   thorpej 	wdr->cmd_iohs[wd_status] = wdr->cmd_iohs[wd_command];
    183  1.205   thorpej 	wdr->cmd_iohs[wd_features] = wdr->cmd_iohs[wd_error];
    184  1.205   thorpej }
    185  1.205   thorpej 
    186  1.205   thorpej /*
    187  1.205   thorpej  * Allocate a wdc_regs array, based on the number of channels.
    188  1.205   thorpej  */
    189  1.205   thorpej void
    190  1.205   thorpej wdc_allocate_regs(struct wdc_softc *wdc)
    191  1.205   thorpej {
    192  1.205   thorpej 
    193  1.207   thorpej 	wdc->regs = malloc(wdc->sc_atac.atac_nchannels *
    194  1.207   thorpej 			   sizeof(struct wdc_regs), M_DEVBUF, M_WAITOK);
    195  1.176   thorpej }
    196  1.176   thorpej 
    197  1.240    bouyer #if NSATA > 0
    198  1.239    bouyer /*
    199  1.239    bouyer  * probe drives on SATA controllers with standard SATA registers:
    200  1.239    bouyer  * bring the PHYs online, read the drive signature and set drive flags
    201  1.239    bouyer  * appropriately.
    202  1.239    bouyer  */
    203  1.239    bouyer void
    204  1.239    bouyer wdc_sataprobe(struct ata_channel *chp)
    205  1.239    bouyer {
    206  1.239    bouyer 	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(chp);
    207  1.279    martin 	uint8_t st = 0, sc __unused, sn __unused, cl, ch;
    208  1.239    bouyer 	int i, s;
    209  1.239    bouyer 
    210  1.274    bouyer 	KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
    211  1.239    bouyer 
    212  1.242    bouyer 	/* reset the PHY and bring online */
    213  1.242    bouyer 	switch (sata_reset_interface(chp, wdr->sata_iot, wdr->sata_control,
    214  1.278    bouyer 	    wdr->sata_status, AT_WAIT)) {
    215  1.239    bouyer 	case SStatus_DET_DEV:
    216  1.258  sborrill 		/* wait 5s for BSY to clear */
    217  1.258  sborrill 		for (i = 0; i < WDC_PROBE_WAIT * hz; i++) {
    218  1.258  sborrill 			bus_space_write_1(wdr->cmd_iot,
    219  1.258  sborrill 			    wdr->cmd_iohs[wd_sdh], 0, WDSD_IBM);
    220  1.258  sborrill 			delay(10);      /* 400ns delay */
    221  1.258  sborrill 			st = bus_space_read_1(wdr->cmd_iot,
    222  1.258  sborrill 			    wdr->cmd_iohs[wd_status], 0);
    223  1.258  sborrill 			if ((st & WDCS_BSY) == 0)
    224  1.258  sborrill 				break;
    225  1.258  sborrill 			tsleep(&chp, PRIBIO, "sataprb", 1);
    226  1.258  sborrill 		}
    227  1.258  sborrill 		if (i == WDC_PROBE_WAIT * hz)
    228  1.258  sborrill 			aprint_error_dev(chp->ch_atac->atac_dev,
    229  1.258  sborrill 			    "BSY never cleared, status 0x%02x\n", st);
    230  1.258  sborrill 		sc = bus_space_read_1(wdr->cmd_iot,
    231  1.239    bouyer 		    wdr->cmd_iohs[wd_seccnt], 0);
    232  1.258  sborrill 		sn = bus_space_read_1(wdr->cmd_iot,
    233  1.239    bouyer 		    wdr->cmd_iohs[wd_sector], 0);
    234  1.258  sborrill 		cl = bus_space_read_1(wdr->cmd_iot,
    235  1.239    bouyer 		    wdr->cmd_iohs[wd_cyl_lo], 0);
    236  1.258  sborrill 		ch = bus_space_read_1(wdr->cmd_iot,
    237  1.239    bouyer 		    wdr->cmd_iohs[wd_cyl_hi], 0);
    238  1.258  sborrill 		ATADEBUG_PRINT(("%s: port %d: sc=0x%x sn=0x%x "
    239  1.239    bouyer 		    "cl=0x%x ch=0x%x\n",
    240  1.253      cube 		    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
    241  1.258  sborrill 		    sc, sn, cl, ch), DEBUG_PROBE);
    242  1.274    bouyer 		if (atabus_alloc_drives(chp, 1) != 0)
    243  1.274    bouyer 			return;
    244  1.239    bouyer 		/*
    245  1.258  sborrill 		 * sc and sn are supposed to be 0x1 for ATAPI, but in some
    246  1.239    bouyer 		 * cases we get wrong values here, so ignore it.
    247  1.239    bouyer 		 */
    248  1.239    bouyer 		s = splbio();
    249  1.239    bouyer 		if (cl == 0x14 && ch == 0xeb)
    250  1.274    bouyer 			chp->ch_drive[0].drive_type = ATA_DRIVET_ATAPI;
    251  1.239    bouyer 		else
    252  1.274    bouyer 			chp->ch_drive[0].drive_type = ATA_DRIVET_ATA;
    253  1.239    bouyer 		splx(s);
    254  1.239    bouyer 
    255  1.241    bouyer 		/*
    256  1.241    bouyer 		 * issue a reset in case only the interface part of the drive
    257  1.241    bouyer 		 * is up
    258  1.241    bouyer 		 */
    259  1.241    bouyer 		if (wdcreset(chp, RESET_SLEEP) != 0)
    260  1.274    bouyer 			chp->ch_drive[0].drive_type = ATA_DRIVET_NONE;
    261  1.239    bouyer 		break;
    262  1.239    bouyer 
    263  1.239    bouyer 	default:
    264  1.242    bouyer 		break;
    265  1.239    bouyer 	}
    266  1.239    bouyer }
    267  1.240    bouyer #endif /* NSATA > 0 */
    268  1.239    bouyer 
    269  1.239    bouyer 
    270  1.162   thorpej /* Test to see controller with at last one attached drive is there.
    271  1.162   thorpej  * Returns a bit for each possible drive found (0x01 for drive 0,
    272  1.162   thorpej  * 0x02 for drive 1).
    273  1.162   thorpej  * Logic:
    274  1.162   thorpej  * - If a status register is at 0xff, assume there is no drive here
    275  1.162   thorpej  *   (ISA has pull-up resistors).  Similarly if the status register has
    276  1.162   thorpej  *   the value we last wrote to the bus (for IDE interfaces without pullups).
    277  1.162   thorpej  *   If no drive at all -> return.
    278  1.162   thorpej  * - reset the controller, wait for it to complete (may take up to 31s !).
    279  1.162   thorpej  *   If timeout -> return.
    280  1.162   thorpej  * - test ATA/ATAPI signatures. If at last one drive found -> return.
    281  1.162   thorpej  * - try an ATA command on the master.
    282  1.162   thorpej  */
    283  1.137    bouyer 
    284  1.239    bouyer void
    285  1.205   thorpej wdc_drvprobe(struct ata_channel *chp)
    286  1.137    bouyer {
    287  1.257     pooka 	struct ataparams params; /* XXX: large struct */
    288  1.207   thorpej 	struct atac_softc *atac = chp->ch_atac;
    289  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
    290  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
    291  1.145  christos 	u_int8_t st0 = 0, st1 = 0;
    292  1.232    bouyer 	int i, j, error, s;
    293  1.137    bouyer 
    294  1.274    bouyer 	if (atabus_alloc_drives(chp, wdc->wdc_maxdrives) != 0)
    295  1.274    bouyer 		return;
    296  1.164   thorpej 	if (wdcprobe1(chp, 0) == 0) {
    297  1.164   thorpej 		/* No drives, abort the attach here. */
    298  1.274    bouyer 		atabus_free_drives(chp);
    299  1.164   thorpej 		return;
    300  1.161   thorpej 	}
    301  1.137    bouyer 
    302  1.263    bouyer 	s = splbio();
    303  1.137    bouyer 	/* for ATA/OLD drives, wait for DRDY, 3s timeout */
    304  1.137    bouyer 	for (i = 0; i < mstohz(3000); i++) {
    305  1.263    bouyer 		/*
    306  1.263    bouyer 		 * select drive 1 first, so that master is selected on
    307  1.263    bouyer 		 * exit from the loop
    308  1.263    bouyer 		 */
    309  1.274    bouyer 		if (chp->ch_ndrives > 1 &&
    310  1.274    bouyer 		    chp->ch_drive[1].drive_type == ATA_DRIVET_ATA) {
    311  1.263    bouyer 			if (wdc->select)
    312  1.263    bouyer 				wdc->select(chp,1);
    313  1.263    bouyer 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    314  1.263    bouyer 			    0, WDSD_IBM | 0x10);
    315  1.263    bouyer 			delay(10);	/* 400ns delay */
    316  1.263    bouyer 			st1 = bus_space_read_1(wdr->cmd_iot,
    317  1.263    bouyer 			    wdr->cmd_iohs[wd_status], 0);
    318  1.263    bouyer 		}
    319  1.274    bouyer 		if (chp->ch_drive[0].drive_type == ATA_DRIVET_ATA) {
    320  1.207   thorpej 			if (wdc->select)
    321  1.174    bouyer 				wdc->select(chp,0);
    322  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    323  1.174    bouyer 			    0, WDSD_IBM);
    324  1.174    bouyer 			delay(10);	/* 400ns delay */
    325  1.205   thorpej 			st0 = bus_space_read_1(wdr->cmd_iot,
    326  1.205   thorpej 			    wdr->cmd_iohs[wd_status], 0);
    327  1.174    bouyer 		}
    328  1.219     perry 
    329  1.219     perry 
    330  1.274    bouyer 		if ((chp->ch_drive[0].drive_type != ATA_DRIVET_ATA ||
    331  1.274    bouyer 		     (st0 & WDCS_DRDY)) &&
    332  1.274    bouyer 		    (chp->ch_ndrives < 2 ||
    333  1.274    bouyer 		     chp->ch_drive[1].drive_type != ATA_DRIVET_ATA ||
    334  1.274    bouyer 		     (st1 & WDCS_DRDY)))
    335  1.137    bouyer 			break;
    336  1.263    bouyer #ifdef WDC_NO_IDS
    337  1.263    bouyer 		/* cannot tsleep here (can't enable IPL_BIO interrups),
    338  1.263    bouyer 		 * delay instead
    339  1.263    bouyer 		 */
    340  1.263    bouyer 		delay(1000000 / hz);
    341  1.263    bouyer #else
    342  1.164   thorpej 		tsleep(&params, PRIBIO, "atadrdy", 1);
    343  1.265    bouyer #endif
    344  1.264  christos 	}
    345  1.274    bouyer 	if ((st0 & WDCS_DRDY) == 0 &&
    346  1.274    bouyer 	    chp->ch_drive[0].drive_type != ATA_DRIVET_ATAPI)
    347  1.274    bouyer 		chp->ch_drive[0].drive_type = ATA_DRIVET_NONE;
    348  1.274    bouyer 	if (chp->ch_ndrives > 1 && (st1 & WDCS_DRDY) == 0 &&
    349  1.274    bouyer 	    chp->ch_drive[1].drive_type != ATA_DRIVET_ATAPI)
    350  1.274    bouyer 		chp->ch_drive[1].drive_type = ATA_DRIVET_NONE;
    351  1.212   thorpej 	splx(s);
    352  1.137    bouyer 
    353  1.204   thorpej 	ATADEBUG_PRINT(("%s:%d: wait DRDY st0 0x%x st1 0x%x\n",
    354  1.253      cube 	    device_xname(atac->atac_dev),
    355  1.169   thorpej 	    chp->ch_channel, st0, st1), DEBUG_PROBE);
    356  1.137    bouyer 
    357  1.137    bouyer 	/* Wait a bit, some devices are weird just after a reset. */
    358  1.137    bouyer 	delay(5000);
    359  1.137    bouyer 
    360  1.274    bouyer 	for (i = 0; i < chp->ch_ndrives; i++) {
    361  1.238     itohy #if NATA_DMA
    362  1.137    bouyer 		/*
    363  1.137    bouyer 		 * Init error counter so that an error withing the first xfers
    364  1.137    bouyer 		 * will trigger a downgrade
    365  1.137    bouyer 		 */
    366  1.137    bouyer 		chp->ch_drive[i].n_dmaerrs = NERRS_MAX-1;
    367  1.238     itohy #endif
    368  1.137    bouyer 
    369  1.137    bouyer 		/* If controller can't do 16bit flag the drives as 32bit */
    370  1.207   thorpej 		if ((atac->atac_cap &
    371  1.212   thorpej 		    (ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) == ATAC_CAP_DATA32) {
    372  1.212   thorpej 			s = splbio();
    373  1.274    bouyer 			chp->ch_drive[i].drive_flags |= ATA_DRIVE_CAP32;
    374  1.212   thorpej 			splx(s);
    375  1.212   thorpej 		}
    376  1.274    bouyer 		if (chp->ch_drive[i].drive_type == ATA_DRIVET_NONE)
    377  1.137    bouyer 			continue;
    378  1.137    bouyer 
    379  1.144    briggs 		/* Shortcut in case we've been shutdown */
    380  1.205   thorpej 		if (chp->ch_flags & ATACH_SHUTDOWN)
    381  1.164   thorpej 			return;
    382  1.144    briggs 
    383  1.216    bouyer 		/*
    384  1.216    bouyer 		 * Issue an identify, to try to detect ghosts.
    385  1.216    bouyer 		 * Note that we can't use interrupts here, because if there
    386  1.216    bouyer 		 * is no devices, we will get a command aborted without
    387  1.216    bouyer 		 * interrupts.
    388  1.216    bouyer 		 */
    389  1.216    bouyer 		error = ata_get_params(&chp->ch_drive[i],
    390  1.216    bouyer 		    AT_WAIT | AT_POLL, &params);
    391  1.137    bouyer 		if (error != CMD_OK) {
    392  1.164   thorpej 			tsleep(&params, PRIBIO, "atacnf", mstohz(1000));
    393  1.144    briggs 
    394  1.144    briggs 			/* Shortcut in case we've been shutdown */
    395  1.205   thorpej 			if (chp->ch_flags & ATACH_SHUTDOWN)
    396  1.164   thorpej 				return;
    397  1.144    briggs 
    398  1.137    bouyer 			error = ata_get_params(&chp->ch_drive[i],
    399  1.216    bouyer 			    AT_WAIT | AT_POLL, &params);
    400  1.137    bouyer 		}
    401  1.274    bouyer 		if (error != CMD_OK) {
    402  1.204   thorpej 			ATADEBUG_PRINT(("%s:%d:%d: IDENTIFY failed (%d)\n",
    403  1.253      cube 			    device_xname(atac->atac_dev),
    404  1.169   thorpej 			    chp->ch_channel, i, error), DEBUG_PROBE);
    405  1.274    bouyer 			s = splbio();
    406  1.274    bouyer 			if (chp->ch_drive[i].drive_type != ATA_DRIVET_ATA ||
    407  1.274    bouyer 			    (wdc->cap & WDC_CAPABILITY_PREATA) == 0) {
    408  1.274    bouyer 				chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
    409  1.276  kiyohara 				splx(s);
    410  1.137    bouyer 				continue;
    411  1.274    bouyer 			}
    412  1.274    bouyer 			splx(s);
    413  1.137    bouyer 			/*
    414  1.137    bouyer 			 * Pre-ATA drive ?
    415  1.137    bouyer 			 * Test registers writability (Error register not
    416  1.137    bouyer 			 * writable, but cyllo is), then try an ATA command.
    417  1.137    bouyer 			 */
    418  1.203   thorpej 			if (wdc->select)
    419  1.169   thorpej 				wdc->select(chp,i);
    420  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    421  1.205   thorpej 			    wdr->cmd_iohs[wd_sdh], 0, WDSD_IBM | (i << 4));
    422  1.137    bouyer 			delay(10);	/* 400ns delay */
    423  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_error],
    424  1.157      fvdl 			    0, 0x58);
    425  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    426  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0, 0xa5);
    427  1.205   thorpej 			if (bus_space_read_1(wdr->cmd_iot,
    428  1.205   thorpej 				wdr->cmd_iohs[wd_error], 0) == 0x58 ||
    429  1.205   thorpej 			    bus_space_read_1(wdr->cmd_iot,
    430  1.205   thorpej 				wdr->cmd_iohs[wd_cyl_lo], 0) != 0xa5) {
    431  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d:%d: register "
    432  1.137    bouyer 				    "writability failed\n",
    433  1.253      cube 				    device_xname(atac->atac_dev),
    434  1.169   thorpej 				    chp->ch_channel, i), DEBUG_PROBE);
    435  1.212   thorpej 				    s = splbio();
    436  1.274    bouyer 				    chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
    437  1.212   thorpej 				    splx(s);
    438  1.155    bouyer 				    continue;
    439  1.137    bouyer 			}
    440  1.166   thorpej 			if (wdc_wait_for_ready(chp, 10000, 0) == WDCWAIT_TOUT) {
    441  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d:%d: not ready\n",
    442  1.253      cube 				    device_xname(atac->atac_dev),
    443  1.169   thorpej 				    chp->ch_channel, i), DEBUG_PROBE);
    444  1.212   thorpej 				s = splbio();
    445  1.274    bouyer 				chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
    446  1.212   thorpej 				splx(s);
    447  1.137    bouyer 				continue;
    448  1.137    bouyer 			}
    449  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    450  1.205   thorpej 			    wdr->cmd_iohs[wd_command], 0, WDCC_RECAL);
    451  1.137    bouyer 			delay(10);	/* 400ns delay */
    452  1.166   thorpej 			if (wdc_wait_for_ready(chp, 10000, 0) == WDCWAIT_TOUT) {
    453  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d:%d: WDCC_RECAL failed\n",
    454  1.253      cube 				    device_xname(atac->atac_dev),
    455  1.169   thorpej 				    chp->ch_channel, i), DEBUG_PROBE);
    456  1.212   thorpej 				s = splbio();
    457  1.274    bouyer 				chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
    458  1.212   thorpej 				splx(s);
    459  1.155    bouyer 			} else {
    460  1.212   thorpej 				s = splbio();
    461  1.274    bouyer 				for (j = 0; j < chp->ch_ndrives; j++) {
    462  1.274    bouyer 					if (chp->ch_drive[i].drive_type !=
    463  1.274    bouyer 					    ATA_DRIVET_NONE) {
    464  1.274    bouyer 						chp->ch_drive[j].drive_type =
    465  1.274    bouyer 						    ATA_DRIVET_OLD;
    466  1.274    bouyer 					}
    467  1.274    bouyer 				}
    468  1.212   thorpej 				splx(s);
    469  1.137    bouyer 			}
    470  1.137    bouyer 		}
    471  1.137    bouyer 	}
    472  1.164   thorpej }
    473  1.164   thorpej 
    474    1.2    bouyer int
    475  1.205   thorpej wdcprobe(struct ata_channel *chp)
    476   1.12       cgd {
    477  1.228    bouyer 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
    478  1.227    bouyer 	/* default reset method */
    479  1.227    bouyer 	if (wdc->reset == NULL)
    480  1.227    bouyer 		wdc->reset = wdc_do_reset;
    481  1.163   thorpej 
    482  1.163   thorpej 	return (wdcprobe1(chp, 1));
    483  1.137    bouyer }
    484  1.137    bouyer 
    485  1.167   thorpej static int
    486  1.205   thorpej wdcprobe1(struct ata_channel *chp, int poll)
    487  1.137    bouyer {
    488  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
    489  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
    490  1.279    martin 	u_int8_t st0 = 0, st1 = 0, sc __unused, sn __unused, cl, ch;
    491   1.31    bouyer 	u_int8_t ret_value = 0x03;
    492   1.31    bouyer 	u_int8_t drive;
    493  1.156    bouyer 	int s;
    494  1.247    dyoung 	/* XXX if poll, wdc_probe_count is 0. */
    495  1.224    bouyer 	int wdc_probe_count =
    496  1.247    dyoung 	    poll ? (WDC_PROBE_WAIT / WDCDELAY)
    497  1.247    dyoung 	         : (WDC_PROBE_WAIT * hz);
    498   1.31    bouyer 
    499   1.31    bouyer 	/*
    500   1.31    bouyer 	 * Sanity check to see if the wdc channel responds at all.
    501   1.31    bouyer 	 */
    502   1.31    bouyer 
    503  1.174    bouyer 	s = splbio();
    504  1.207   thorpej 	if ((wdc->cap & WDC_CAPABILITY_NO_EXTRA_RESETS) == 0) {
    505  1.224    bouyer 		while (wdc_probe_count-- > 0) {
    506  1.224    bouyer 			if (wdc->select)
    507  1.224    bouyer 				wdc->select(chp,0);
    508  1.107       dbj 
    509  1.224    bouyer 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    510  1.224    bouyer 			    0, WDSD_IBM);
    511  1.224    bouyer 			delay(10);	/* 400ns delay */
    512  1.224    bouyer 			st0 = bus_space_read_1(wdr->cmd_iot,
    513  1.224    bouyer 			    wdr->cmd_iohs[wd_status], 0);
    514  1.137    bouyer 
    515  1.224    bouyer 			if (wdc->select)
    516  1.224    bouyer 				wdc->select(chp,1);
    517  1.219     perry 
    518  1.224    bouyer 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    519  1.224    bouyer 			    0, WDSD_IBM | 0x10);
    520  1.224    bouyer 			delay(10);	/* 400ns delay */
    521  1.224    bouyer 			st1 = bus_space_read_1(wdr->cmd_iot,
    522  1.224    bouyer 			    wdr->cmd_iohs[wd_status], 0);
    523  1.224    bouyer 			if ((st0 & WDCS_BSY) == 0)
    524  1.224    bouyer 				break;
    525  1.224    bouyer 		}
    526   1.43      kenh 
    527  1.204   thorpej 		ATADEBUG_PRINT(("%s:%d: before reset, st0=0x%x, st1=0x%x\n",
    528  1.253      cube 		    device_xname(chp->ch_atac->atac_dev),
    529  1.169   thorpej 		    chp->ch_channel, st0, st1), DEBUG_PROBE);
    530   1.43      kenh 
    531  1.142    bouyer 		if (st0 == 0xff || st0 == WDSD_IBM)
    532   1.43      kenh 			ret_value &= ~0x01;
    533  1.142    bouyer 		if (st1 == 0xff || st1 == (WDSD_IBM | 0x10))
    534   1.43      kenh 			ret_value &= ~0x02;
    535  1.125   mycroft 		/* Register writability test, drive 0. */
    536  1.125   mycroft 		if (ret_value & 0x01) {
    537  1.207   thorpej 			if (wdc->select)
    538  1.169   thorpej 				wdc->select(chp,0);
    539  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    540  1.157      fvdl 			    0, WDSD_IBM);
    541  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    542  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0, 0x02);
    543  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    544  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
    545  1.174    bouyer 			if (cl != 0x02) {
    546  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 0 wd_cyl_lo: "
    547  1.174    bouyer 				    "got 0x%x != 0x02\n",
    548  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    549  1.174    bouyer 				    chp->ch_channel, cl),
    550  1.174    bouyer 				    DEBUG_PROBE);
    551  1.125   mycroft 				ret_value &= ~0x01;
    552  1.174    bouyer 			}
    553  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    554  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0, 0x01);
    555  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    556  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
    557  1.174    bouyer 			if (cl != 0x01) {
    558  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 0 wd_cyl_lo: "
    559  1.174    bouyer 				    "got 0x%x != 0x01\n",
    560  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    561  1.174    bouyer 				    chp->ch_channel, cl),
    562  1.174    bouyer 				    DEBUG_PROBE);
    563  1.125   mycroft 				ret_value &= ~0x01;
    564  1.174    bouyer 			}
    565  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    566  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0, 0x01);
    567  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    568  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0);
    569  1.174    bouyer 			if (cl != 0x01) {
    570  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 0 wd_sector: "
    571  1.174    bouyer 				    "got 0x%x != 0x01\n",
    572  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    573  1.174    bouyer 				    chp->ch_channel, cl),
    574  1.174    bouyer 				    DEBUG_PROBE);
    575  1.125   mycroft 				ret_value &= ~0x01;
    576  1.174    bouyer 			}
    577  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    578  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0, 0x02);
    579  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    580  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0);
    581  1.174    bouyer 			if (cl != 0x02) {
    582  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 0 wd_sector: "
    583  1.174    bouyer 				    "got 0x%x != 0x02\n",
    584  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    585  1.174    bouyer 				    chp->ch_channel, cl),
    586  1.174    bouyer 				    DEBUG_PROBE);
    587  1.125   mycroft 				ret_value &= ~0x01;
    588  1.174    bouyer 			}
    589  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    590  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
    591  1.174    bouyer 			if (cl != 0x01) {
    592  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 0 wd_cyl_lo(2): "
    593  1.174    bouyer 				    "got 0x%x != 0x01\n",
    594  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    595  1.174    bouyer 				    chp->ch_channel, cl),
    596  1.174    bouyer 				    DEBUG_PROBE);
    597  1.131   mycroft 				ret_value &= ~0x01;
    598  1.174    bouyer 			}
    599  1.125   mycroft 		}
    600  1.125   mycroft 		/* Register writability test, drive 1. */
    601  1.125   mycroft 		if (ret_value & 0x02) {
    602  1.207   thorpej 			if (wdc->select)
    603  1.169   thorpej 			     wdc->select(chp,1);
    604  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    605  1.157      fvdl 			     0, WDSD_IBM | 0x10);
    606  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    607  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0, 0x02);
    608  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    609  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
    610  1.174    bouyer 			if (cl != 0x02) {
    611  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 1 wd_cyl_lo: "
    612  1.174    bouyer 				    "got 0x%x != 0x02\n",
    613  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    614  1.174    bouyer 				    chp->ch_channel, cl),
    615  1.174    bouyer 				    DEBUG_PROBE);
    616  1.125   mycroft 				ret_value &= ~0x02;
    617  1.174    bouyer 			}
    618  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    619  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0, 0x01);
    620  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    621  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
    622  1.174    bouyer 			if (cl != 0x01) {
    623  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 1 wd_cyl_lo: "
    624  1.174    bouyer 				    "got 0x%x != 0x01\n",
    625  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    626  1.174    bouyer 				    chp->ch_channel, cl),
    627  1.174    bouyer 				    DEBUG_PROBE);
    628  1.125   mycroft 				ret_value &= ~0x02;
    629  1.174    bouyer 			}
    630  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    631  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0, 0x01);
    632  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    633  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0);
    634  1.174    bouyer 			if (cl != 0x01) {
    635  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 1 wd_sector: "
    636  1.174    bouyer 				    "got 0x%x != 0x01\n",
    637  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    638  1.174    bouyer 				    chp->ch_channel, cl),
    639  1.174    bouyer 				    DEBUG_PROBE);
    640  1.125   mycroft 				ret_value &= ~0x02;
    641  1.174    bouyer 			}
    642  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot,
    643  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0, 0x02);
    644  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    645  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0);
    646  1.174    bouyer 			if (cl != 0x02) {
    647  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 1 wd_sector: "
    648  1.174    bouyer 				    "got 0x%x != 0x02\n",
    649  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    650  1.174    bouyer 				    chp->ch_channel, cl),
    651  1.174    bouyer 				    DEBUG_PROBE);
    652  1.125   mycroft 				ret_value &= ~0x02;
    653  1.174    bouyer 			}
    654  1.205   thorpej 			cl = bus_space_read_1(wdr->cmd_iot,
    655  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
    656  1.174    bouyer 			if (cl != 0x01) {
    657  1.204   thorpej 				ATADEBUG_PRINT(("%s:%d drive 1 wd_cyl_lo(2): "
    658  1.174    bouyer 				    "got 0x%x != 0x01\n",
    659  1.253      cube 				    device_xname(chp->ch_atac->atac_dev),
    660  1.174    bouyer 				    chp->ch_channel, cl),
    661  1.174    bouyer 				    DEBUG_PROBE);
    662  1.131   mycroft 				ret_value &= ~0x02;
    663  1.174    bouyer 			}
    664  1.125   mycroft 		}
    665  1.137    bouyer 
    666  1.174    bouyer 		if (ret_value == 0) {
    667  1.174    bouyer 			splx(s);
    668  1.137    bouyer 			return 0;
    669  1.174    bouyer 		}
    670   1.62    bouyer 	}
    671   1.31    bouyer 
    672  1.174    bouyer 
    673  1.181    bouyer #if 0 /* XXX this break some ATA or ATAPI devices */
    674  1.174    bouyer 	/*
    675  1.174    bouyer 	 * reset bus. Also send an ATAPI_RESET to devices, in case there are
    676  1.174    bouyer 	 * ATAPI device out there which don't react to the bus reset
    677  1.174    bouyer 	 */
    678  1.174    bouyer 	if (ret_value & 0x01) {
    679  1.207   thorpej 		if (wdc->select)
    680  1.174    bouyer 			wdc->select(chp,0);
    681  1.205   thorpej 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    682  1.174    bouyer 		     0, WDSD_IBM);
    683  1.205   thorpej 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_command], 0,
    684  1.174    bouyer 		    ATAPI_SOFT_RESET);
    685  1.174    bouyer 	}
    686  1.174    bouyer 	if (ret_value & 0x02) {
    687  1.207   thorpej 		if (wdc->select)
    688  1.174    bouyer 			wdc->select(chp,0);
    689  1.205   thorpej 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
    690  1.174    bouyer 		     0, WDSD_IBM | 0x10);
    691  1.205   thorpej 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_command], 0,
    692  1.174    bouyer 		    ATAPI_SOFT_RESET);
    693  1.174    bouyer 	}
    694  1.156    bouyer 
    695  1.175    bouyer 	delay(5000);
    696  1.181    bouyer #endif
    697  1.175    bouyer 
    698  1.225    bouyer 	wdc->reset(chp, RESET_POLL);
    699  1.137    bouyer 	DELAY(2000);
    700  1.205   thorpej 	(void) bus_space_read_1(wdr->cmd_iot, wdr->cmd_iohs[wd_error], 0);
    701  1.275   rkujawa 
    702  1.275   rkujawa 	if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL))
    703  1.275   rkujawa 		bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr,
    704  1.275   rkujawa 		    WDCTL_4BIT);
    705  1.275   rkujawa 
    706  1.263    bouyer #ifdef WDC_NO_IDS
    707  1.263    bouyer 	ret_value = __wdcwait_reset(chp, ret_value, RESET_POLL);
    708  1.263    bouyer #else
    709  1.156    bouyer 	splx(s);
    710  1.137    bouyer 	ret_value = __wdcwait_reset(chp, ret_value, poll);
    711  1.263    bouyer 	s = splbio();
    712  1.263    bouyer #endif
    713  1.204   thorpej 	ATADEBUG_PRINT(("%s:%d: after reset, ret_value=0x%d\n",
    714  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
    715  1.137    bouyer 	    ret_value), DEBUG_PROBE);
    716   1.12       cgd 
    717  1.137    bouyer 	/* if reset failed, there's nothing here */
    718  1.263    bouyer 	if (ret_value == 0) {
    719  1.263    bouyer 		splx(s);
    720  1.137    bouyer 		return 0;
    721  1.263    bouyer 	}
    722   1.67    bouyer 
    723   1.12       cgd 	/*
    724  1.167   thorpej 	 * Test presence of drives. First test register signatures looking
    725  1.167   thorpej 	 * for ATAPI devices. If it's not an ATAPI and reset said there may
    726  1.167   thorpej 	 * be something here assume it's ATA or OLD.  Ghost will be killed
    727  1.167   thorpej 	 * later in attach routine.
    728   1.12       cgd 	 */
    729  1.274    bouyer 	for (drive = 0; drive < wdc->wdc_maxdrives; drive++) {
    730  1.137    bouyer 		if ((ret_value & (0x01 << drive)) == 0)
    731  1.137    bouyer 			continue;
    732  1.207   thorpej 		if (wdc->select)
    733  1.169   thorpej 			wdc->select(chp,drive);
    734  1.205   thorpej 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
    735  1.137    bouyer 		    WDSD_IBM | (drive << 4));
    736  1.137    bouyer 		delay(10);	/* 400ns delay */
    737  1.137    bouyer 		/* Save registers contents */
    738  1.205   thorpej 		sc = bus_space_read_1(wdr->cmd_iot,
    739  1.205   thorpej 		    wdr->cmd_iohs[wd_seccnt], 0);
    740  1.205   thorpej 		sn = bus_space_read_1(wdr->cmd_iot,
    741  1.205   thorpej 		    wdr->cmd_iohs[wd_sector], 0);
    742  1.205   thorpej 		cl = bus_space_read_1(wdr->cmd_iot,
    743  1.205   thorpej 		    wdr->cmd_iohs[wd_cyl_lo], 0);
    744  1.205   thorpej 		ch = bus_space_read_1(wdr->cmd_iot,
    745  1.205   thorpej 		     wdr->cmd_iohs[wd_cyl_hi], 0);
    746  1.137    bouyer 
    747  1.204   thorpej 		ATADEBUG_PRINT(("%s:%d:%d: after reset, sc=0x%x sn=0x%x "
    748  1.137    bouyer 		    "cl=0x%x ch=0x%x\n",
    749  1.253      cube 		    device_xname(chp->ch_atac->atac_dev),
    750  1.266  jakllsch 		    chp->ch_channel, drive, sc, sn, cl, ch), DEBUG_PROBE);
    751   1.31    bouyer 		/*
    752  1.266  jakllsch 		 * sc & sn are supposed to be 0x1 for ATAPI but in some cases
    753  1.137    bouyer 		 * we get wrong values here, so ignore it.
    754   1.31    bouyer 		 */
    755  1.274    bouyer 		if (chp->ch_drive != NULL) {
    756  1.274    bouyer 			if (cl == 0x14 && ch == 0xeb) {
    757  1.274    bouyer 				chp->ch_drive[drive].drive_type = ATA_DRIVET_ATAPI;
    758  1.274    bouyer 			} else {
    759  1.274    bouyer 				chp->ch_drive[drive].drive_type = ATA_DRIVET_ATA;
    760  1.274    bouyer 			}
    761  1.137    bouyer 		}
    762   1.31    bouyer 	}
    763  1.263    bouyer 	/*
    764  1.263    bouyer 	 * Select an existing drive before lowering spl, some WDC_NO_IDS
    765  1.263    bouyer 	 * devices incorrectly assert IRQ on nonexistent slave
    766  1.263    bouyer 	 */
    767  1.263    bouyer 	if (ret_value & 0x01) {
    768  1.263    bouyer 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
    769  1.263    bouyer 		    WDSD_IBM);
    770  1.263    bouyer 		(void)bus_space_read_1(wdr->cmd_iot,
    771  1.263    bouyer 		    wdr->cmd_iohs[wd_status], 0);
    772  1.263    bouyer 	}
    773  1.263    bouyer 	splx(s);
    774  1.219     perry 	return (ret_value);
    775  1.137    bouyer }
    776   1.31    bouyer 
    777  1.137    bouyer void
    778  1.205   thorpej wdcattach(struct ata_channel *chp)
    779  1.137    bouyer {
    780  1.207   thorpej 	struct atac_softc *atac = chp->ch_atac;
    781  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
    782   1.32    bouyer 
    783  1.274    bouyer 	KASSERT(wdc->wdc_maxdrives > 0 && wdc->wdc_maxdrives <= WDC_MAXDRIVES);
    784  1.205   thorpej 
    785  1.191   mycroft 	/* default data transfer methods */
    786  1.210   thorpej 	if (wdc->datain_pio == NULL)
    787  1.191   mycroft 		wdc->datain_pio = wdc_datain_pio;
    788  1.210   thorpej 	if (wdc->dataout_pio == NULL)
    789  1.191   mycroft 		wdc->dataout_pio = wdc_dataout_pio;
    790  1.225    bouyer 	/* default reset method */
    791  1.225    bouyer 	if (wdc->reset == NULL)
    792  1.225    bouyer 		wdc->reset = wdc_do_reset;
    793  1.191   mycroft 
    794  1.137    bouyer 	/* initialise global data */
    795  1.208   thorpej 	if (atac->atac_bustype_ata == NULL)
    796  1.208   thorpej 		atac->atac_bustype_ata = &wdc_ata_bustype;
    797  1.207   thorpej 	if (atac->atac_probe == NULL)
    798  1.207   thorpej 		atac->atac_probe = wdc_drvprobe;
    799  1.208   thorpej #if NATAPIBUS > 0
    800  1.208   thorpej 	if (atac->atac_atapibus_attach == NULL)
    801  1.208   thorpej 		atac->atac_atapibus_attach = wdc_atapibus_attach;
    802  1.208   thorpej #endif
    803  1.198   thorpej 
    804  1.210   thorpej 	ata_channel_attach(chp);
    805   1.74     enami }
    806   1.74     enami 
    807  1.250    dyoung void
    808  1.250    dyoung wdc_childdetached(device_t self, device_t child)
    809  1.250    dyoung {
    810  1.250    dyoung 	struct atac_softc *atac = device_private(self);
    811  1.250    dyoung 	struct ata_channel *chp;
    812  1.250    dyoung 	int i;
    813  1.250    dyoung 
    814  1.250    dyoung 	for (i = 0; i < atac->atac_nchannels; i++) {
    815  1.250    dyoung 		chp = atac->atac_channels[i];
    816  1.250    dyoung 		if (child == chp->atabus) {
    817  1.250    dyoung 			chp->atabus = NULL;
    818  1.250    dyoung 			return;
    819  1.250    dyoung 		}
    820  1.250    dyoung 	}
    821  1.250    dyoung }
    822  1.250    dyoung 
    823  1.137    bouyer int
    824  1.250    dyoung wdcdetach(device_t self, int flags)
    825  1.137    bouyer {
    826  1.250    dyoung 	struct atac_softc *atac = device_private(self);
    827  1.205   thorpej 	struct ata_channel *chp;
    828  1.207   thorpej 	struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic;
    829  1.137    bouyer 	int i, error = 0;
    830  1.137    bouyer 
    831  1.207   thorpej 	for (i = 0; i < atac->atac_nchannels; i++) {
    832  1.207   thorpej 		chp = atac->atac_channels[i];
    833  1.250    dyoung 		if (chp->atabus == NULL)
    834  1.250    dyoung 			continue;
    835  1.204   thorpej 		ATADEBUG_PRINT(("wdcdetach: %s: detaching %s\n",
    836  1.253      cube 		    device_xname(atac->atac_dev), device_xname(chp->atabus)),
    837  1.207   thorpej 		    DEBUG_DETACH);
    838  1.251    dyoung 		if ((error = config_detach(chp->atabus, flags)) != 0)
    839  1.251    dyoung 			return error;
    840  1.137    bouyer 	}
    841  1.252    dyoung 	if (adapt->adapt_refcnt != 0)
    842  1.252    dyoung 		return EBUSY;
    843  1.251    dyoung 	return 0;
    844  1.137    bouyer }
    845  1.137    bouyer 
    846   1.31    bouyer /* restart an interrupted I/O */
    847   1.31    bouyer void
    848  1.163   thorpej wdcrestart(void *v)
    849   1.31    bouyer {
    850  1.205   thorpej 	struct ata_channel *chp = v;
    851   1.31    bouyer 	int s;
    852    1.2    bouyer 
    853   1.31    bouyer 	s = splbio();
    854  1.202   thorpej 	atastart(chp);
    855   1.31    bouyer 	splx(s);
    856    1.2    bouyer }
    857  1.219     perry 
    858    1.2    bouyer 
    859   1.31    bouyer /*
    860   1.31    bouyer  * Interrupt routine for the controller.  Acknowledge the interrupt, check for
    861   1.31    bouyer  * errors on the current operation, mark it done if necessary, and start the
    862   1.31    bouyer  * next request.  Also check for a partially done transfer, and continue with
    863   1.31    bouyer  * the next chunk if so.
    864   1.31    bouyer  */
    865   1.12       cgd int
    866  1.163   thorpej wdcintr(void *arg)
    867   1.12       cgd {
    868  1.205   thorpej 	struct ata_channel *chp = arg;
    869  1.207   thorpej 	struct atac_softc *atac = chp->ch_atac;
    870  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
    871  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
    872  1.165   thorpej 	struct ata_xfer *xfer;
    873   1.76    bouyer 	int ret;
    874   1.12       cgd 
    875  1.253      cube 	if (!device_is_active(atac->atac_dev)) {
    876  1.204   thorpej 		ATADEBUG_PRINT(("wdcintr: deactivated controller\n"),
    877   1.80     enami 		    DEBUG_INTR);
    878   1.80     enami 		return (0);
    879   1.80     enami 	}
    880  1.205   thorpej 	if ((chp->ch_flags & ATACH_IRQ_WAIT) == 0) {
    881  1.204   thorpej 		ATADEBUG_PRINT(("wdcintr: inactive controller\n"), DEBUG_INTR);
    882  1.113    bouyer 		/* try to clear the pending interrupt anyway */
    883  1.205   thorpej 		(void)bus_space_read_1(wdr->cmd_iot,
    884  1.205   thorpej 		    wdr->cmd_iohs[wd_status], 0);
    885   1.80     enami 		return (0);
    886   1.31    bouyer 	}
    887   1.12       cgd 
    888  1.204   thorpej 	ATADEBUG_PRINT(("wdcintr\n"), DEBUG_INTR);
    889  1.186    bouyer 	xfer = chp->ch_queue->active_xfer;
    890  1.186    bouyer #ifdef DIAGNOSTIC
    891  1.186    bouyer 	if (xfer == NULL)
    892  1.186    bouyer 		panic("wdcintr: no xfer");
    893  1.233    bouyer 	if (xfer->c_chp != chp) {
    894  1.233    bouyer 		printf("channel %d expected %d\n", xfer->c_chp->ch_channel,
    895  1.233    bouyer 		    chp->ch_channel);
    896  1.233    bouyer 		panic("wdcintr: wrong channel");
    897  1.233    bouyer 	}
    898  1.186    bouyer #endif
    899  1.238     itohy #if NATA_DMA || NATA_PIOBM
    900  1.205   thorpej 	if (chp->ch_flags & ATACH_DMA_WAIT) {
    901  1.169   thorpej 		wdc->dma_status =
    902  1.169   thorpej 		    (*wdc->dma_finish)(wdc->dma_arg, chp->ch_channel,
    903  1.185    bouyer 			xfer->c_drive, WDC_DMAEND_END);
    904  1.169   thorpej 		if (wdc->dma_status & WDC_DMAST_NOIRQ) {
    905   1.84    bouyer 			/* IRQ not for us, not detected by DMA engine */
    906   1.84    bouyer 			return 0;
    907   1.84    bouyer 		}
    908  1.205   thorpej 		chp->ch_flags &= ~ATACH_DMA_WAIT;
    909   1.84    bouyer 	}
    910  1.238     itohy #endif
    911  1.205   thorpej 	chp->ch_flags &= ~ATACH_IRQ_WAIT;
    912  1.262  jakllsch 	KASSERT(xfer->c_intr != NULL);
    913   1.76    bouyer 	ret = xfer->c_intr(chp, xfer, 1);
    914   1.76    bouyer 	if (ret == 0) /* irq was not for us, still waiting for irq */
    915  1.205   thorpej 		chp->ch_flags |= ATACH_IRQ_WAIT;
    916   1.76    bouyer 	return (ret);
    917   1.12       cgd }
    918   1.12       cgd 
    919   1.31    bouyer /* Put all disk in RESET state */
    920  1.125   mycroft void
    921  1.274    bouyer wdc_reset_drive(struct ata_drive_datas *drvp, int flags, uint32_t *sigp)
    922    1.2    bouyer {
    923  1.205   thorpej 	struct ata_channel *chp = drvp->chnl_softc;
    924  1.207   thorpej 
    925  1.274    bouyer 	KASSERT(sigp == NULL);
    926  1.274    bouyer 
    927  1.211   thorpej 	ATADEBUG_PRINT(("wdc_reset_drive %s:%d for drive %d\n",
    928  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
    929  1.253      cube 	    drvp->drive), DEBUG_FUNCS);
    930  1.182    bouyer 
    931  1.211   thorpej 	ata_reset_channel(chp, flags);
    932  1.182    bouyer }
    933  1.182    bouyer 
    934  1.183    bouyer void
    935  1.205   thorpej wdc_reset_channel(struct ata_channel *chp, int flags)
    936  1.182    bouyer {
    937  1.186    bouyer 	TAILQ_HEAD(, ata_xfer) reset_xfer;
    938  1.183    bouyer 	struct ata_xfer *xfer, *next_xfer;
    939  1.238     itohy #if NATA_DMA || NATA_PIOBM
    940  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
    941  1.238     itohy #endif
    942  1.186    bouyer 	TAILQ_INIT(&reset_xfer);
    943  1.184    bouyer 
    944  1.211   thorpej 	chp->ch_flags &= ~ATACH_IRQ_WAIT;
    945  1.184    bouyer 
    946  1.186    bouyer 	/*
    947  1.186    bouyer 	 * if the current command if on an ATAPI device, issue a
    948  1.186    bouyer 	 * ATAPI_SOFT_RESET
    949  1.186    bouyer 	 */
    950  1.186    bouyer 	xfer = chp->ch_queue->active_xfer;
    951  1.186    bouyer 	if (xfer && xfer->c_chp == chp && (xfer->c_flags & C_ATAPI)) {
    952  1.186    bouyer 		wdccommandshort(chp, xfer->c_drive, ATAPI_SOFT_RESET);
    953  1.186    bouyer 		if (flags & AT_WAIT)
    954  1.186    bouyer 			tsleep(&flags, PRIBIO, "atardl", mstohz(1) + 1);
    955  1.219     perry 		else
    956  1.186    bouyer 			delay(1000);
    957  1.186    bouyer 	}
    958  1.186    bouyer 
    959  1.184    bouyer 	/* reset the channel */
    960  1.186    bouyer 	if (flags & AT_WAIT)
    961  1.186    bouyer 		(void) wdcreset(chp, RESET_SLEEP);
    962  1.186    bouyer 	else
    963  1.184    bouyer 		(void) wdcreset(chp, RESET_POLL);
    964  1.184    bouyer 
    965  1.184    bouyer 	/*
    966  1.186    bouyer 	 * wait a bit after reset; in case the DMA engines needs some time
    967  1.184    bouyer 	 * to recover.
    968  1.184    bouyer 	 */
    969  1.184    bouyer 	if (flags & AT_WAIT)
    970  1.186    bouyer 		tsleep(&flags, PRIBIO, "atardl", mstohz(1) + 1);
    971  1.219     perry 	else
    972  1.184    bouyer 		delay(1000);
    973  1.182    bouyer 	/*
    974  1.182    bouyer 	 * look for pending xfers. If we have a shared queue, we'll also reset
    975  1.182    bouyer 	 * the other channel if the current xfer is running on it.
    976  1.184    bouyer 	 * Then we'll dequeue only the xfers for this channel.
    977  1.182    bouyer 	 */
    978  1.182    bouyer 	if ((flags & AT_RST_NOCMD) == 0) {
    979  1.186    bouyer 		/*
    980  1.186    bouyer 		 * move all xfers queued for this channel to the reset queue,
    981  1.186    bouyer 		 * and then process the current xfer and then the reset queue.
    982  1.186    bouyer 		 * We have to use a temporary queue because c_kill_xfer()
    983  1.186    bouyer 		 * may requeue commands.
    984  1.186    bouyer 		 */
    985  1.186    bouyer 		for (xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer);
    986  1.186    bouyer 		    xfer != NULL; xfer = next_xfer) {
    987  1.186    bouyer 			next_xfer = TAILQ_NEXT(xfer, c_xferchain);
    988  1.186    bouyer 			if (xfer->c_chp != chp)
    989  1.186    bouyer 				continue;
    990  1.186    bouyer 			TAILQ_REMOVE(&chp->ch_queue->queue_xfer,
    991  1.186    bouyer 			    xfer, c_xferchain);
    992  1.186    bouyer 			TAILQ_INSERT_TAIL(&reset_xfer, xfer, c_xferchain);
    993  1.186    bouyer 		}
    994  1.186    bouyer 		xfer = chp->ch_queue->active_xfer;
    995  1.184    bouyer 		if (xfer) {
    996  1.184    bouyer 			if (xfer->c_chp != chp)
    997  1.211   thorpej 				ata_reset_channel(xfer->c_chp, flags);
    998  1.184    bouyer 			else {
    999  1.186    bouyer 				callout_stop(&chp->ch_callout);
   1000  1.238     itohy #if NATA_DMA || NATA_PIOBM
   1001  1.184    bouyer 				/*
   1002  1.184    bouyer 				 * If we're waiting for DMA, stop the
   1003  1.184    bouyer 				 * DMA engine
   1004  1.184    bouyer 				 */
   1005  1.205   thorpej 				if (chp->ch_flags & ATACH_DMA_WAIT) {
   1006  1.207   thorpej 					(*wdc->dma_finish)(
   1007  1.207   thorpej 					    wdc->dma_arg,
   1008  1.184    bouyer 					    chp->ch_channel,
   1009  1.184    bouyer 					    xfer->c_drive,
   1010  1.185    bouyer 					    WDC_DMAEND_ABRT_QUIET);
   1011  1.205   thorpej 					chp->ch_flags &= ~ATACH_DMA_WAIT;
   1012  1.184    bouyer 				}
   1013  1.238     itohy #endif
   1014  1.186    bouyer 				chp->ch_queue->active_xfer = NULL;
   1015  1.186    bouyer 				if ((flags & AT_RST_EMERG) == 0)
   1016  1.186    bouyer 					xfer->c_kill_xfer(
   1017  1.186    bouyer 					    chp, xfer, KILL_RESET);
   1018  1.184    bouyer 			}
   1019  1.184    bouyer 		}
   1020  1.186    bouyer 
   1021  1.186    bouyer 		for (xfer = TAILQ_FIRST(&reset_xfer);
   1022  1.183    bouyer 		    xfer != NULL; xfer = next_xfer) {
   1023  1.183    bouyer 			next_xfer = TAILQ_NEXT(xfer, c_xferchain);
   1024  1.186    bouyer 			TAILQ_REMOVE(&reset_xfer, xfer, c_xferchain);
   1025  1.182    bouyer 			if ((flags & AT_RST_EMERG) == 0)
   1026  1.182    bouyer 				xfer->c_kill_xfer(chp, xfer, KILL_RESET);
   1027  1.182    bouyer 		}
   1028  1.182    bouyer 	}
   1029   1.31    bouyer }
   1030   1.12       cgd 
   1031  1.213   thorpej static int
   1032  1.205   thorpej wdcreset(struct ata_channel *chp, int poll)
   1033   1.31    bouyer {
   1034  1.207   thorpej 	struct atac_softc *atac = chp->ch_atac;
   1035  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1036  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1037   1.31    bouyer 	int drv_mask1, drv_mask2;
   1038  1.225    bouyer 
   1039  1.263    bouyer #ifdef WDC_NO_IDS
   1040  1.263    bouyer 	poll = RESET_POLL;
   1041  1.263    bouyer #endif
   1042  1.225    bouyer 	wdc->reset(chp, poll);
   1043  1.225    bouyer 
   1044  1.274    bouyer 	drv_mask1 = (chp->ch_drive[0].drive_type !=  ATA_DRIVET_NONE) ? 0x01:0x00;
   1045  1.274    bouyer 	if (chp->ch_ndrives > 1)
   1046  1.274    bouyer 		drv_mask1 |=
   1047  1.274    bouyer 		    (chp->ch_drive[1].drive_type != ATA_DRIVET_NONE) ? 0x02:0x00;
   1048  1.225    bouyer 	drv_mask2 = __wdcwait_reset(chp, drv_mask1,
   1049  1.225    bouyer 	    (poll == RESET_SLEEP) ? 0 : 1);
   1050  1.225    bouyer 	if (drv_mask2 != drv_mask1) {
   1051  1.253      cube 		aprint_error("%s channel %d: reset failed for",
   1052  1.253      cube 		    device_xname(atac->atac_dev), chp->ch_channel);
   1053  1.225    bouyer 		if ((drv_mask1 & 0x01) != 0 && (drv_mask2 & 0x01) == 0)
   1054  1.253      cube 			aprint_normal(" drive 0");
   1055  1.225    bouyer 		if ((drv_mask1 & 0x02) != 0 && (drv_mask2 & 0x02) == 0)
   1056  1.253      cube 			aprint_normal(" drive 1");
   1057  1.253      cube 		aprint_normal("\n");
   1058  1.225    bouyer 	}
   1059  1.275   rkujawa 	if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL))
   1060  1.275   rkujawa 		bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr,
   1061  1.275   rkujawa 		    WDCTL_4BIT);
   1062  1.275   rkujawa 
   1063  1.225    bouyer 	return  (drv_mask1 != drv_mask2) ? 1 : 0;
   1064  1.225    bouyer }
   1065  1.225    bouyer 
   1066  1.225    bouyer void
   1067  1.225    bouyer wdc_do_reset(struct ata_channel *chp, int poll)
   1068  1.225    bouyer {
   1069  1.225    bouyer 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1070  1.225    bouyer 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1071  1.156    bouyer 	int s = 0;
   1072    1.2    bouyer 
   1073  1.225    bouyer 	if (poll != RESET_SLEEP)
   1074  1.225    bouyer 		s = splbio();
   1075  1.203   thorpej 	if (wdc->select)
   1076  1.169   thorpej 		wdc->select(chp,0);
   1077  1.157      fvdl 	/* master */
   1078  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0, WDSD_IBM);
   1079  1.131   mycroft 	delay(10);	/* 400ns delay */
   1080  1.225    bouyer 	/* assert SRST, wait for reset to complete */
   1081  1.275   rkujawa 	if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL)) {
   1082  1.275   rkujawa 		bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr,
   1083  1.275   rkujawa 		    WDCTL_RST | WDCTL_IDS | WDCTL_4BIT);
   1084  1.275   rkujawa 		delay(2000);
   1085  1.275   rkujawa 	}
   1086  1.205   thorpej 	(void) bus_space_read_1(wdr->cmd_iot, wdr->cmd_iohs[wd_error], 0);
   1087  1.275   rkujawa 	if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL))
   1088  1.275   rkujawa 		bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh, wd_aux_ctlr,
   1089  1.275   rkujawa 		    WDCTL_4BIT | WDCTL_IDS);
   1090  1.131   mycroft 	delay(10);	/* 400ns delay */
   1091  1.156    bouyer 	if (poll != RESET_SLEEP) {
   1092  1.233    bouyer 		/* ACK interrupt in case there is one pending left */
   1093  1.203   thorpej 		if (wdc->irqack)
   1094  1.169   thorpej 			wdc->irqack(chp);
   1095  1.156    bouyer 		splx(s);
   1096  1.156    bouyer 	}
   1097   1.31    bouyer }
   1098   1.31    bouyer 
   1099   1.31    bouyer static int
   1100  1.205   thorpej __wdcwait_reset(struct ata_channel *chp, int drv_mask, int poll)
   1101   1.31    bouyer {
   1102  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1103  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1104  1.137    bouyer 	int timeout, nloop;
   1105  1.149    bouyer 	u_int8_t st0 = 0, st1 = 0;
   1106  1.204   thorpej #ifdef ATADEBUG
   1107  1.146  christos 	u_int8_t sc0 = 0, sn0 = 0, cl0 = 0, ch0 = 0;
   1108  1.146  christos 	u_int8_t sc1 = 0, sn1 = 0, cl1 = 0, ch1 = 0;
   1109   1.70    bouyer #endif
   1110  1.137    bouyer 	if (poll)
   1111  1.137    bouyer 		nloop = WDCNDELAY_RST;
   1112  1.137    bouyer 	else
   1113  1.137    bouyer 		nloop = WDC_RESET_WAIT * hz / 1000;
   1114   1.31    bouyer 	/* wait for BSY to deassert */
   1115  1.137    bouyer 	for (timeout = 0; timeout < nloop; timeout++) {
   1116  1.174    bouyer 		if ((drv_mask & 0x01) != 0) {
   1117  1.236    bouyer 			if (wdc->select)
   1118  1.174    bouyer 				wdc->select(chp,0);
   1119  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
   1120  1.174    bouyer 			    0, WDSD_IBM); /* master */
   1121  1.174    bouyer 			delay(10);
   1122  1.205   thorpej 			st0 = bus_space_read_1(wdr->cmd_iot,
   1123  1.205   thorpej 			    wdr->cmd_iohs[wd_status], 0);
   1124  1.204   thorpej #ifdef ATADEBUG
   1125  1.205   thorpej 			sc0 = bus_space_read_1(wdr->cmd_iot,
   1126  1.205   thorpej 			    wdr->cmd_iohs[wd_seccnt], 0);
   1127  1.205   thorpej 			sn0 = bus_space_read_1(wdr->cmd_iot,
   1128  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0);
   1129  1.205   thorpej 			cl0 = bus_space_read_1(wdr->cmd_iot,
   1130  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
   1131  1.205   thorpej 			ch0 = bus_space_read_1(wdr->cmd_iot,
   1132  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_hi], 0);
   1133   1.70    bouyer #endif
   1134  1.174    bouyer 		}
   1135  1.174    bouyer 		if ((drv_mask & 0x02) != 0) {
   1136  1.236    bouyer 			if (wdc->select)
   1137  1.174    bouyer 				wdc->select(chp,1);
   1138  1.205   thorpej 			bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh],
   1139  1.174    bouyer 			    0, WDSD_IBM | 0x10); /* slave */
   1140  1.174    bouyer 			delay(10);
   1141  1.205   thorpej 			st1 = bus_space_read_1(wdr->cmd_iot,
   1142  1.205   thorpej 			    wdr->cmd_iohs[wd_status], 0);
   1143  1.204   thorpej #ifdef ATADEBUG
   1144  1.205   thorpej 			sc1 = bus_space_read_1(wdr->cmd_iot,
   1145  1.205   thorpej 			    wdr->cmd_iohs[wd_seccnt], 0);
   1146  1.205   thorpej 			sn1 = bus_space_read_1(wdr->cmd_iot,
   1147  1.205   thorpej 			    wdr->cmd_iohs[wd_sector], 0);
   1148  1.205   thorpej 			cl1 = bus_space_read_1(wdr->cmd_iot,
   1149  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_lo], 0);
   1150  1.205   thorpej 			ch1 = bus_space_read_1(wdr->cmd_iot,
   1151  1.205   thorpej 			    wdr->cmd_iohs[wd_cyl_hi], 0);
   1152   1.70    bouyer #endif
   1153  1.174    bouyer 		}
   1154   1.31    bouyer 
   1155   1.31    bouyer 		if ((drv_mask & 0x01) == 0) {
   1156   1.31    bouyer 			/* no master */
   1157   1.31    bouyer 			if ((drv_mask & 0x02) != 0 && (st1 & WDCS_BSY) == 0) {
   1158   1.31    bouyer 				/* No master, slave is ready, it's done */
   1159   1.65    bouyer 				goto end;
   1160   1.31    bouyer 			}
   1161  1.231    bouyer 			if ((drv_mask & 0x02) == 0) {
   1162  1.231    bouyer 				/* No master, no slave: it's done */
   1163  1.231    bouyer 				goto end;
   1164  1.231    bouyer 			}
   1165   1.31    bouyer 		} else if ((drv_mask & 0x02) == 0) {
   1166   1.31    bouyer 			/* no slave */
   1167   1.31    bouyer 			if ((drv_mask & 0x01) != 0 && (st0 & WDCS_BSY) == 0) {
   1168   1.31    bouyer 				/* No slave, master is ready, it's done */
   1169   1.65    bouyer 				goto end;
   1170   1.31    bouyer 			}
   1171    1.2    bouyer 		} else {
   1172   1.31    bouyer 			/* Wait for both master and slave to be ready */
   1173   1.31    bouyer 			if ((st0 & WDCS_BSY) == 0 && (st1 & WDCS_BSY) == 0) {
   1174   1.65    bouyer 				goto end;
   1175    1.2    bouyer 			}
   1176    1.2    bouyer 		}
   1177  1.137    bouyer 		if (poll)
   1178  1.137    bouyer 			delay(WDCDELAY);
   1179  1.137    bouyer 		else
   1180  1.137    bouyer 			tsleep(&nloop, PRIBIO, "atarst", 1);
   1181    1.2    bouyer 	}
   1182  1.116       wiz 	/* Reset timed out. Maybe it's because drv_mask was not right */
   1183   1.31    bouyer 	if (st0 & WDCS_BSY)
   1184   1.31    bouyer 		drv_mask &= ~0x01;
   1185   1.31    bouyer 	if (st1 & WDCS_BSY)
   1186   1.31    bouyer 		drv_mask &= ~0x02;
   1187   1.65    bouyer end:
   1188  1.204   thorpej 	ATADEBUG_PRINT(("%s:%d:0: after reset, sc=0x%x sn=0x%x "
   1189   1.70    bouyer 	    "cl=0x%x ch=0x%x\n",
   1190  1.253      cube 	     device_xname(chp->ch_atac->atac_dev),
   1191  1.169   thorpej 	     chp->ch_channel, sc0, sn0, cl0, ch0), DEBUG_PROBE);
   1192  1.204   thorpej 	ATADEBUG_PRINT(("%s:%d:1: after reset, sc=0x%x sn=0x%x "
   1193   1.70    bouyer 	    "cl=0x%x ch=0x%x\n",
   1194  1.253      cube 	     device_xname(chp->ch_atac->atac_dev),
   1195  1.169   thorpej 	     chp->ch_channel, sc1, sn1, cl1, ch1), DEBUG_PROBE);
   1196   1.70    bouyer 
   1197  1.204   thorpej 	ATADEBUG_PRINT(("%s:%d: wdcwait_reset() end, st0=0x%x st1=0x%x\n",
   1198  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
   1199  1.149    bouyer 	    st0, st1), DEBUG_PROBE);
   1200   1.65    bouyer 
   1201   1.31    bouyer 	return drv_mask;
   1202    1.2    bouyer }
   1203    1.2    bouyer 
   1204    1.2    bouyer /*
   1205   1.31    bouyer  * Wait for a drive to be !BSY, and have mask in its status register.
   1206   1.31    bouyer  * return -1 for a timeout after "timeout" ms.
   1207    1.2    bouyer  */
   1208  1.167   thorpej static int
   1209  1.205   thorpej __wdcwait(struct ata_channel *chp, int mask, int bits, int timeout)
   1210    1.2    bouyer {
   1211  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1212  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1213   1.31    bouyer 	u_char status;
   1214  1.222  christos 	int xtime = 0;
   1215   1.60       abs 
   1216  1.207   thorpej 	ATADEBUG_PRINT(("__wdcwait %s:%d\n",
   1217  1.253      cube 			device_xname(chp->ch_atac->atac_dev),
   1218  1.169   thorpej 			chp->ch_channel), DEBUG_STATUS);
   1219   1.31    bouyer 	chp->ch_error = 0;
   1220   1.31    bouyer 
   1221   1.31    bouyer 	timeout = timeout * 1000 / WDCDELAY; /* delay uses microseconds */
   1222    1.2    bouyer 
   1223   1.31    bouyer 	for (;;) {
   1224   1.31    bouyer 		chp->ch_status = status =
   1225  1.205   thorpej 		    bus_space_read_1(wdr->cmd_iot, wdr->cmd_iohs[wd_status], 0);
   1226  1.131   mycroft 		if ((status & (WDCS_BSY | mask)) == bits)
   1227   1.31    bouyer 			break;
   1228  1.222  christos 		if (++xtime > timeout) {
   1229  1.204   thorpej 			ATADEBUG_PRINT(("__wdcwait: timeout (time=%d), "
   1230   1.87    bouyer 			    "status %x error %x (mask 0x%x bits 0x%x)\n",
   1231  1.222  christos 			    xtime, status,
   1232  1.205   thorpej 			    bus_space_read_1(wdr->cmd_iot,
   1233  1.205   thorpej 				wdr->cmd_iohs[wd_error], 0), mask, bits),
   1234   1.87    bouyer 			    DEBUG_STATUS | DEBUG_PROBE | DEBUG_DELAY);
   1235  1.137    bouyer 			return(WDCWAIT_TOUT);
   1236   1.31    bouyer 		}
   1237   1.31    bouyer 		delay(WDCDELAY);
   1238    1.2    bouyer 	}
   1239  1.204   thorpej #ifdef ATADEBUG
   1240  1.222  christos 	if (xtime > 0 && (atadebug_mask & DEBUG_DELAY))
   1241  1.222  christos 		printf("__wdcwait: did busy-wait, time=%d\n", xtime);
   1242   1.87    bouyer #endif
   1243   1.31    bouyer 	if (status & WDCS_ERR)
   1244  1.205   thorpej 		chp->ch_error = bus_space_read_1(wdr->cmd_iot,
   1245  1.205   thorpej 		    wdr->cmd_iohs[wd_error], 0);
   1246   1.31    bouyer #ifdef WDCNDELAY_DEBUG
   1247   1.31    bouyer 	/* After autoconfig, there should be no long delays. */
   1248  1.222  christos 	if (!cold && xtime > WDCNDELAY_DEBUG) {
   1249  1.186    bouyer 		struct ata_xfer *xfer = chp->ch_queue->active_xfer;
   1250   1.31    bouyer 		if (xfer == NULL)
   1251   1.31    bouyer 			printf("%s channel %d: warning: busy-wait took %dus\n",
   1252  1.253      cube 			    device_xname(chp->ch_atac->atac_dev),
   1253  1.253      cube 			    chp->ch_channel, WDCDELAY * xtime);
   1254  1.219     perry 		else
   1255   1.31    bouyer 			printf("%s:%d:%d: warning: busy-wait took %dus\n",
   1256  1.253      cube 			    device_xname(chp->ch_atac->atac_dev),
   1257  1.253      cube 			    chp->ch_channel, xfer->c_drive,
   1258  1.222  christos 			    WDCDELAY * xtime);
   1259    1.2    bouyer 	}
   1260    1.2    bouyer #endif
   1261  1.137    bouyer 	return(WDCWAIT_OK);
   1262  1.137    bouyer }
   1263  1.137    bouyer 
   1264  1.137    bouyer /*
   1265  1.137    bouyer  * Call __wdcwait(), polling using tsleep() or waking up the kernel
   1266  1.137    bouyer  * thread if possible
   1267  1.137    bouyer  */
   1268  1.137    bouyer int
   1269  1.205   thorpej wdcwait(struct ata_channel *chp, int mask, int bits, int timeout, int flags)
   1270  1.137    bouyer {
   1271  1.137    bouyer 	int error, i, timeout_hz = mstohz(timeout);
   1272  1.137    bouyer 
   1273  1.137    bouyer 	if (timeout_hz == 0 ||
   1274  1.137    bouyer 	    (flags & (AT_WAIT | AT_POLL)) == AT_POLL)
   1275  1.137    bouyer 		error = __wdcwait(chp, mask, bits, timeout);
   1276  1.137    bouyer 	else {
   1277  1.137    bouyer 		error = __wdcwait(chp, mask, bits, WDCDELAY_POLL);
   1278  1.137    bouyer 		if (error != 0) {
   1279  1.256    bouyer 			if ((chp->ch_flags & ATACH_TH_RUN) ||
   1280  1.256    bouyer 			    (flags & AT_WAIT)) {
   1281  1.137    bouyer 				/*
   1282  1.147    bouyer 				 * we're running in the channel thread
   1283  1.147    bouyer 				 * or some userland thread context
   1284  1.137    bouyer 				 */
   1285  1.137    bouyer 				for (i = 0; i < timeout_hz; i++) {
   1286  1.137    bouyer 					if (__wdcwait(chp, mask, bits,
   1287  1.137    bouyer 					    WDCDELAY_POLL) == 0) {
   1288  1.137    bouyer 						error = 0;
   1289  1.137    bouyer 						break;
   1290  1.137    bouyer 					}
   1291  1.137    bouyer 					tsleep(&chp, PRIBIO, "atapoll", 1);
   1292  1.137    bouyer 				}
   1293  1.137    bouyer 			} else {
   1294  1.137    bouyer 				/*
   1295  1.256    bouyer 				 * we're probably in interrupt context,
   1296  1.137    bouyer 				 * ask the thread to come back here
   1297  1.137    bouyer 				 */
   1298  1.147    bouyer #ifdef DIAGNOSTIC
   1299  1.148    bouyer 				if (chp->ch_queue->queue_freeze > 0)
   1300  1.148    bouyer 					panic("wdcwait: queue_freeze");
   1301  1.147    bouyer #endif
   1302  1.148    bouyer 				chp->ch_queue->queue_freeze++;
   1303  1.170   thorpej 				wakeup(&chp->ch_thread);
   1304  1.137    bouyer 				return(WDCWAIT_THR);
   1305  1.137    bouyer 			}
   1306  1.137    bouyer 		}
   1307  1.137    bouyer 	}
   1308  1.163   thorpej 	return (error);
   1309    1.2    bouyer }
   1310    1.2    bouyer 
   1311  1.137    bouyer 
   1312  1.238     itohy #if NATA_DMA
   1313   1.84    bouyer /*
   1314   1.84    bouyer  * Busy-wait for DMA to complete
   1315   1.84    bouyer  */
   1316   1.84    bouyer int
   1317  1.205   thorpej wdc_dmawait(struct ata_channel *chp, struct ata_xfer *xfer, int timeout)
   1318   1.84    bouyer {
   1319  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1320  1.222  christos 	int xtime;
   1321  1.169   thorpej 
   1322  1.222  christos 	for (xtime = 0;  xtime < timeout * 1000 / WDCDELAY; xtime++) {
   1323  1.169   thorpej 		wdc->dma_status =
   1324  1.169   thorpej 		    (*wdc->dma_finish)(wdc->dma_arg,
   1325  1.185    bouyer 			chp->ch_channel, xfer->c_drive, WDC_DMAEND_END);
   1326  1.169   thorpej 		if ((wdc->dma_status & WDC_DMAST_NOIRQ) == 0)
   1327   1.84    bouyer 			return 0;
   1328   1.84    bouyer 		delay(WDCDELAY);
   1329   1.84    bouyer 	}
   1330   1.84    bouyer 	/* timeout, force a DMA halt */
   1331  1.169   thorpej 	wdc->dma_status = (*wdc->dma_finish)(wdc->dma_arg,
   1332  1.185    bouyer 	    chp->ch_channel, xfer->c_drive, WDC_DMAEND_ABRT);
   1333   1.84    bouyer 	return 1;
   1334   1.84    bouyer }
   1335  1.238     itohy #endif
   1336   1.84    bouyer 
   1337   1.31    bouyer void
   1338  1.163   thorpej wdctimeout(void *arg)
   1339    1.2    bouyer {
   1340  1.205   thorpej 	struct ata_channel *chp = (struct ata_channel *)arg;
   1341  1.238     itohy #if NATA_DMA || NATA_PIOBM
   1342  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1343  1.238     itohy #endif
   1344  1.186    bouyer 	struct ata_xfer *xfer = chp->ch_queue->active_xfer;
   1345   1.31    bouyer 	int s;
   1346    1.2    bouyer 
   1347  1.204   thorpej 	ATADEBUG_PRINT(("wdctimeout\n"), DEBUG_FUNCS);
   1348   1.31    bouyer 
   1349   1.31    bouyer 	s = splbio();
   1350  1.205   thorpej 	if ((chp->ch_flags & ATACH_IRQ_WAIT) != 0) {
   1351   1.31    bouyer 		__wdcerror(chp, "lost interrupt");
   1352   1.88       mrg 		printf("\ttype: %s tc_bcount: %d tc_skip: %d\n",
   1353   1.88       mrg 		    (xfer->c_flags & C_ATAPI) ?  "atapi" : "ata",
   1354   1.88       mrg 		    xfer->c_bcount,
   1355   1.88       mrg 		    xfer->c_skip);
   1356  1.238     itohy #if NATA_DMA || NATA_PIOBM
   1357  1.205   thorpej 		if (chp->ch_flags & ATACH_DMA_WAIT) {
   1358  1.169   thorpej 			wdc->dma_status =
   1359  1.169   thorpej 			    (*wdc->dma_finish)(wdc->dma_arg,
   1360  1.185    bouyer 				chp->ch_channel, xfer->c_drive,
   1361  1.185    bouyer 				WDC_DMAEND_ABRT);
   1362  1.205   thorpej 			chp->ch_flags &= ~ATACH_DMA_WAIT;
   1363   1.84    bouyer 		}
   1364  1.238     itohy #endif
   1365   1.31    bouyer 		/*
   1366  1.119  drochner 		 * Call the interrupt routine. If we just missed an interrupt,
   1367   1.31    bouyer 		 * it will do what's needed. Else, it will take the needed
   1368   1.31    bouyer 		 * action (reset the device).
   1369   1.70    bouyer 		 * Before that we need to reinstall the timeout callback,
   1370   1.70    bouyer 		 * in case it will miss another irq while in this transfer
   1371   1.70    bouyer 		 * We arbitray chose it to be 1s
   1372   1.31    bouyer 		 */
   1373   1.81   thorpej 		callout_reset(&chp->ch_callout, hz, wdctimeout, chp);
   1374   1.31    bouyer 		xfer->c_flags |= C_TIMEOU;
   1375  1.205   thorpej 		chp->ch_flags &= ~ATACH_IRQ_WAIT;
   1376  1.262  jakllsch 		KASSERT(xfer->c_intr != NULL);
   1377   1.66    bouyer 		xfer->c_intr(chp, xfer, 1);
   1378   1.31    bouyer 	} else
   1379   1.31    bouyer 		__wdcerror(chp, "missing untimeout");
   1380   1.31    bouyer 	splx(s);
   1381    1.2    bouyer }
   1382    1.2    bouyer 
   1383    1.2    bouyer int
   1384  1.192   thorpej wdc_exec_command(struct ata_drive_datas *drvp, struct ata_command *ata_c)
   1385   1.31    bouyer {
   1386  1.205   thorpej 	struct ata_channel *chp = drvp->chnl_softc;
   1387  1.165   thorpej 	struct ata_xfer *xfer;
   1388   1.31    bouyer 	int s, ret;
   1389    1.2    bouyer 
   1390  1.204   thorpej 	ATADEBUG_PRINT(("wdc_exec_command %s:%d:%d\n",
   1391  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
   1392  1.253      cube 	    drvp->drive), DEBUG_FUNCS);
   1393    1.2    bouyer 
   1394   1.31    bouyer 	/* set up an xfer and queue. Wait for completion */
   1395  1.198   thorpej 	xfer = ata_get_xfer(ata_c->flags & AT_WAIT ? ATAXF_CANSLEEP :
   1396  1.198   thorpej 	    ATAXF_NOSLEEP);
   1397   1.31    bouyer 	if (xfer == NULL) {
   1398  1.193   thorpej 		return ATACMD_TRY_AGAIN;
   1399   1.31    bouyer 	 }
   1400    1.2    bouyer 
   1401  1.247    dyoung 	if (chp->ch_atac->atac_cap & ATAC_CAP_NOIRQ)
   1402  1.192   thorpej 		ata_c->flags |= AT_POLL;
   1403  1.192   thorpej 	if (ata_c->flags & AT_POLL)
   1404   1.31    bouyer 		xfer->c_flags |= C_POLL;
   1405  1.217    bouyer 	if (ata_c->flags & AT_WAIT)
   1406  1.217    bouyer 		xfer->c_flags |= C_WAIT;
   1407  1.165   thorpej 	xfer->c_drive = drvp->drive;
   1408  1.192   thorpej 	xfer->c_databuf = ata_c->data;
   1409  1.192   thorpej 	xfer->c_bcount = ata_c->bcount;
   1410  1.192   thorpej 	xfer->c_cmd = ata_c;
   1411   1.31    bouyer 	xfer->c_start = __wdccommand_start;
   1412   1.31    bouyer 	xfer->c_intr = __wdccommand_intr;
   1413  1.182    bouyer 	xfer->c_kill_xfer = __wdccommand_kill_xfer;
   1414    1.2    bouyer 
   1415   1.31    bouyer 	s = splbio();
   1416  1.201   thorpej 	ata_exec_xfer(chp, xfer);
   1417   1.31    bouyer #ifdef DIAGNOSTIC
   1418  1.192   thorpej 	if ((ata_c->flags & AT_POLL) != 0 &&
   1419  1.192   thorpej 	    (ata_c->flags & AT_DONE) == 0)
   1420  1.118    provos 		panic("wdc_exec_command: polled command not done");
   1421    1.2    bouyer #endif
   1422  1.192   thorpej 	if (ata_c->flags & AT_DONE) {
   1423  1.193   thorpej 		ret = ATACMD_COMPLETE;
   1424   1.31    bouyer 	} else {
   1425  1.192   thorpej 		if (ata_c->flags & AT_WAIT) {
   1426  1.192   thorpej 			while ((ata_c->flags & AT_DONE) == 0) {
   1427  1.192   thorpej 				tsleep(ata_c, PRIBIO, "wdccmd", 0);
   1428   1.69    bouyer 			}
   1429  1.193   thorpej 			ret = ATACMD_COMPLETE;
   1430   1.31    bouyer 		} else {
   1431  1.193   thorpej 			ret = ATACMD_QUEUED;
   1432    1.2    bouyer 		}
   1433    1.2    bouyer 	}
   1434   1.31    bouyer 	splx(s);
   1435   1.31    bouyer 	return ret;
   1436    1.2    bouyer }
   1437    1.2    bouyer 
   1438  1.167   thorpej static void
   1439  1.205   thorpej __wdccommand_start(struct ata_channel *chp, struct ata_xfer *xfer)
   1440  1.219     perry {
   1441  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1442  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1443  1.165   thorpej 	int drive = xfer->c_drive;
   1444  1.230    bouyer 	int wait_flags = (xfer->c_flags & C_POLL) ? AT_POLL : 0;
   1445  1.192   thorpej 	struct ata_command *ata_c = xfer->c_cmd;
   1446   1.31    bouyer 
   1447  1.204   thorpej 	ATADEBUG_PRINT(("__wdccommand_start %s:%d:%d\n",
   1448  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
   1449  1.253      cube 	    xfer->c_drive),
   1450   1.34    bouyer 	    DEBUG_FUNCS);
   1451   1.31    bouyer 
   1452  1.203   thorpej 	if (wdc->select)
   1453  1.169   thorpej 		wdc->select(chp,drive);
   1454  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
   1455   1.31    bouyer 	    WDSD_IBM | (drive << 4));
   1456  1.192   thorpej 	switch(wdcwait(chp, ata_c->r_st_bmask | WDCS_DRQ,
   1457  1.230    bouyer 	    ata_c->r_st_bmask, ata_c->timeout, wait_flags)) {
   1458  1.137    bouyer 	case WDCWAIT_OK:
   1459  1.137    bouyer 		break;
   1460  1.137    bouyer 	case WDCWAIT_TOUT:
   1461  1.192   thorpej 		ata_c->flags |= AT_TIMEOU;
   1462   1.31    bouyer 		__wdccommand_done(chp, xfer);
   1463   1.53    bouyer 		return;
   1464  1.137    bouyer 	case WDCWAIT_THR:
   1465  1.137    bouyer 		return;
   1466   1.31    bouyer 	}
   1467  1.192   thorpej 	if (ata_c->flags & AT_POLL) {
   1468  1.135    bouyer 		/* polled command, disable interrupts */
   1469  1.275   rkujawa 		if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL))
   1470  1.275   rkujawa 			bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh,
   1471  1.275   rkujawa 			    wd_aux_ctlr, WDCTL_4BIT | WDCTL_IDS);
   1472  1.135    bouyer 	}
   1473  1.268  jakllsch 	if ((ata_c->flags & AT_LBA48) != 0) {
   1474  1.268  jakllsch 		wdccommandext(chp, drive, ata_c->r_command,
   1475  1.277  jakllsch 		    ata_c->r_lba, ata_c->r_count, ata_c->r_features,
   1476  1.277  jakllsch 		    ata_c->r_device & ~0x10);
   1477  1.268  jakllsch 	} else {
   1478  1.268  jakllsch 		wdccommand(chp, drive, ata_c->r_command,
   1479  1.268  jakllsch 		    (ata_c->r_lba >> 8) & 0xffff,
   1480  1.268  jakllsch 		    WDSD_IBM | (drive << 4) |
   1481  1.268  jakllsch 		    (((ata_c->flags & AT_LBA) != 0) ? WDSD_LBA : 0) |
   1482  1.268  jakllsch 		    ((ata_c->r_lba >> 24) & 0x0f),
   1483  1.268  jakllsch 		    ata_c->r_lba & 0xff,
   1484  1.268  jakllsch 		    ata_c->r_count & 0xff,
   1485  1.268  jakllsch 		    ata_c->r_features & 0xff);
   1486  1.268  jakllsch 	}
   1487  1.139    bouyer 
   1488  1.192   thorpej 	if ((ata_c->flags & AT_POLL) == 0) {
   1489  1.205   thorpej 		chp->ch_flags |= ATACH_IRQ_WAIT; /* wait for interrupt */
   1490  1.192   thorpej 		callout_reset(&chp->ch_callout, ata_c->timeout / 1000 * hz,
   1491   1.81   thorpej 		    wdctimeout, chp);
   1492   1.31    bouyer 		return;
   1493    1.2    bouyer 	}
   1494    1.2    bouyer 	/*
   1495   1.31    bouyer 	 * Polled command. Wait for drive ready or drq. Done in intr().
   1496   1.31    bouyer 	 * Wait for at last 400ns for status bit to be valid.
   1497    1.2    bouyer 	 */
   1498  1.134   mycroft 	delay(10);	/* 400ns delay */
   1499   1.66    bouyer 	__wdccommand_intr(chp, xfer, 0);
   1500    1.2    bouyer }
   1501    1.2    bouyer 
   1502  1.167   thorpej static int
   1503  1.205   thorpej __wdccommand_intr(struct ata_channel *chp, struct ata_xfer *xfer, int irq)
   1504    1.2    bouyer {
   1505  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1506  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1507  1.192   thorpej 	struct ata_command *ata_c = xfer->c_cmd;
   1508  1.192   thorpej 	int bcount = ata_c->bcount;
   1509  1.192   thorpej 	char *data = ata_c->data;
   1510  1.137    bouyer 	int wflags;
   1511  1.226    bouyer 	int drive_flags;
   1512  1.226    bouyer 
   1513  1.226    bouyer 	if (ata_c->r_command == WDCC_IDENTIFY ||
   1514  1.226    bouyer 	    ata_c->r_command == ATAPI_IDENTIFY_DEVICE) {
   1515  1.226    bouyer 		/*
   1516  1.226    bouyer 		 * The IDENTIFY data has been designed as an array of
   1517  1.226    bouyer 		 * u_int16_t, so we can byteswap it on the fly.
   1518  1.226    bouyer 		 * Historically it's what we have always done so keeping it
   1519  1.226    bouyer 		 * here ensure binary backward compatibility.
   1520  1.226    bouyer 		 */
   1521  1.274    bouyer 		 drive_flags = ATA_DRIVE_NOSTREAM |
   1522  1.229     tacha 				chp->ch_drive[xfer->c_drive].drive_flags;
   1523  1.226    bouyer 	} else {
   1524  1.226    bouyer 		/*
   1525  1.226    bouyer 		 * Other data structure are opaque and should be transfered
   1526  1.226    bouyer 		 * as is.
   1527  1.226    bouyer 		 */
   1528  1.226    bouyer 		drive_flags = chp->ch_drive[xfer->c_drive].drive_flags;
   1529  1.226    bouyer 	}
   1530  1.137    bouyer 
   1531  1.265    bouyer #ifdef WDC_NO_IDS
   1532  1.265    bouyer 	wflags = AT_POLL;
   1533  1.265    bouyer #else
   1534  1.192   thorpej 	if ((ata_c->flags & (AT_WAIT | AT_POLL)) == (AT_WAIT | AT_POLL)) {
   1535  1.137    bouyer 		/* both wait and poll, we can tsleep here */
   1536  1.147    bouyer 		wflags = AT_WAIT | AT_POLL;
   1537  1.265    bouyer 	} else {
   1538  1.265    bouyer 		wflags = AT_POLL;
   1539  1.265    bouyer 	}
   1540  1.264  christos #endif
   1541   1.31    bouyer 
   1542  1.163   thorpej  again:
   1543  1.204   thorpej 	ATADEBUG_PRINT(("__wdccommand_intr %s:%d:%d\n",
   1544  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
   1545  1.253      cube 	    xfer->c_drive), DEBUG_INTR);
   1546  1.137    bouyer 	/*
   1547  1.137    bouyer 	 * after a ATAPI_SOFT_RESET, the device will have released the bus.
   1548  1.137    bouyer 	 * Reselect again, it doesn't hurt for others commands, and the time
   1549  1.266  jakllsch 	 * penalty for the extra register write is acceptable,
   1550  1.266  jakllsch 	 * wdc_exec_command() isn't called often (mostly for autoconfig)
   1551  1.137    bouyer 	 */
   1552  1.268  jakllsch 	if ((xfer->c_flags & C_ATAPI) != 0) {
   1553  1.268  jakllsch 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
   1554  1.268  jakllsch 		    WDSD_IBM | (xfer->c_drive << 4));
   1555  1.268  jakllsch 	}
   1556  1.192   thorpej 	if ((ata_c->flags & AT_XFDONE) != 0) {
   1557  1.114    bouyer 		/*
   1558  1.114    bouyer 		 * We have completed a data xfer. The drive should now be
   1559  1.114    bouyer 		 * in its initial state
   1560  1.114    bouyer 		 */
   1561  1.192   thorpej 		if (wdcwait(chp, ata_c->r_st_bmask | WDCS_DRQ,
   1562  1.192   thorpej 		    ata_c->r_st_bmask, (irq == 0)  ? ata_c->timeout : 0,
   1563  1.137    bouyer 		    wflags) ==  WDCWAIT_TOUT) {
   1564  1.219     perry 			if (irq && (xfer->c_flags & C_TIMEOU) == 0)
   1565  1.114    bouyer 				return 0; /* IRQ was not for us */
   1566  1.192   thorpej 			ata_c->flags |= AT_TIMEOU;
   1567  1.114    bouyer 		}
   1568  1.131   mycroft 		goto out;
   1569  1.114    bouyer 	}
   1570  1.192   thorpej 	if (wdcwait(chp, ata_c->r_st_pmask, ata_c->r_st_pmask,
   1571  1.192   thorpej 	     (irq == 0)  ? ata_c->timeout : 0, wflags) == WDCWAIT_TOUT) {
   1572  1.219     perry 		if (irq && (xfer->c_flags & C_TIMEOU) == 0)
   1573   1.63    bouyer 			return 0; /* IRQ was not for us */
   1574  1.192   thorpej 		ata_c->flags |= AT_TIMEOU;
   1575  1.131   mycroft 		goto out;
   1576    1.2    bouyer 	}
   1577  1.203   thorpej 	if (wdc->irqack)
   1578  1.169   thorpej 		wdc->irqack(chp);
   1579  1.192   thorpej 	if (ata_c->flags & AT_READ) {
   1580  1.131   mycroft 		if ((chp->ch_status & WDCS_DRQ) == 0) {
   1581  1.192   thorpej 			ata_c->flags |= AT_TIMEOU;
   1582  1.131   mycroft 			goto out;
   1583  1.131   mycroft 		}
   1584  1.226    bouyer 		wdc->datain_pio(chp, drive_flags, data, bcount);
   1585  1.114    bouyer 		/* at this point the drive should be in its initial state */
   1586  1.192   thorpej 		ata_c->flags |= AT_XFDONE;
   1587  1.234    bouyer 		/*
   1588  1.234    bouyer 		 * XXX checking the status register again here cause some
   1589  1.234    bouyer 		 * hardware to timeout.
   1590  1.234    bouyer 		 */
   1591  1.192   thorpej 	} else if (ata_c->flags & AT_WRITE) {
   1592  1.131   mycroft 		if ((chp->ch_status & WDCS_DRQ) == 0) {
   1593  1.192   thorpej 			ata_c->flags |= AT_TIMEOU;
   1594  1.131   mycroft 			goto out;
   1595  1.131   mycroft 		}
   1596  1.226    bouyer 		wdc->dataout_pio(chp, drive_flags, data, bcount);
   1597  1.192   thorpej 		ata_c->flags |= AT_XFDONE;
   1598  1.192   thorpej 		if ((ata_c->flags & AT_POLL) == 0) {
   1599  1.205   thorpej 			chp->ch_flags |= ATACH_IRQ_WAIT; /* wait for interrupt */
   1600  1.114    bouyer 			callout_reset(&chp->ch_callout,
   1601  1.243    bouyer 			    mstohz(ata_c->timeout), wdctimeout, chp);
   1602  1.114    bouyer 			return 1;
   1603  1.114    bouyer 		} else {
   1604  1.114    bouyer 			goto again;
   1605  1.114    bouyer 		}
   1606    1.2    bouyer 	}
   1607  1.163   thorpej  out:
   1608   1.31    bouyer 	__wdccommand_done(chp, xfer);
   1609   1.31    bouyer 	return 1;
   1610    1.2    bouyer }
   1611    1.2    bouyer 
   1612  1.167   thorpej static void
   1613  1.205   thorpej __wdccommand_done(struct ata_channel *chp, struct ata_xfer *xfer)
   1614    1.2    bouyer {
   1615  1.207   thorpej 	struct atac_softc *atac = chp->ch_atac;
   1616  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1617  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1618  1.192   thorpej 	struct ata_command *ata_c = xfer->c_cmd;
   1619    1.2    bouyer 
   1620  1.233    bouyer 	ATADEBUG_PRINT(("__wdccommand_done %s:%d:%d flags 0x%x\n",
   1621  1.253      cube 	    device_xname(atac->atac_dev), chp->ch_channel, xfer->c_drive,
   1622  1.233    bouyer 	    ata_c->flags), DEBUG_FUNCS);
   1623   1.70    bouyer 
   1624   1.70    bouyer 
   1625   1.31    bouyer 	if (chp->ch_status & WDCS_DWF)
   1626  1.192   thorpej 		ata_c->flags |= AT_DF;
   1627   1.31    bouyer 	if (chp->ch_status & WDCS_ERR) {
   1628  1.192   thorpej 		ata_c->flags |= AT_ERROR;
   1629  1.192   thorpej 		ata_c->r_error = chp->ch_error;
   1630   1.31    bouyer 	}
   1631  1.192   thorpej 	if ((ata_c->flags & AT_READREG) != 0 &&
   1632  1.253      cube 	    device_is_active(atac->atac_dev) &&
   1633  1.192   thorpej 	    (ata_c->flags & (AT_ERROR | AT_DF)) == 0) {
   1634  1.268  jakllsch 		ata_c->r_status = bus_space_read_1(wdr->cmd_iot,
   1635  1.268  jakllsch 		    wdr->cmd_iohs[wd_status], 0);
   1636  1.268  jakllsch 		ata_c->r_error = bus_space_read_1(wdr->cmd_iot,
   1637  1.268  jakllsch 		    wdr->cmd_iohs[wd_error], 0);
   1638  1.205   thorpej 		ata_c->r_count = bus_space_read_1(wdr->cmd_iot,
   1639  1.205   thorpej 		    wdr->cmd_iohs[wd_seccnt], 0);
   1640  1.268  jakllsch 		ata_c->r_lba = (uint64_t)bus_space_read_1(wdr->cmd_iot,
   1641  1.268  jakllsch 		    wdr->cmd_iohs[wd_sector], 0) << 0;
   1642  1.268  jakllsch 		ata_c->r_lba |= (uint64_t)bus_space_read_1(wdr->cmd_iot,
   1643  1.268  jakllsch 		    wdr->cmd_iohs[wd_cyl_lo], 0) << 8;
   1644  1.268  jakllsch 		ata_c->r_lba |= (uint64_t)bus_space_read_1(wdr->cmd_iot,
   1645  1.268  jakllsch 		    wdr->cmd_iohs[wd_cyl_hi], 0) << 16;
   1646  1.268  jakllsch 		ata_c->r_device = bus_space_read_1(wdr->cmd_iot,
   1647  1.268  jakllsch 		    wdr->cmd_iohs[wd_sdh], 0);
   1648  1.268  jakllsch 
   1649  1.268  jakllsch 		if ((ata_c->flags & AT_LBA48) != 0) {
   1650  1.275   rkujawa 			if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL)) {
   1651  1.275   rkujawa 				if ((ata_c->flags & AT_POLL) != 0)
   1652  1.275   rkujawa 					bus_space_write_1(wdr->ctl_iot,
   1653  1.275   rkujawa 					    wdr->ctl_ioh, wd_aux_ctlr,
   1654  1.275   rkujawa 					    WDCTL_HOB|WDCTL_4BIT|WDCTL_IDS);
   1655  1.275   rkujawa 				else
   1656  1.275   rkujawa 					bus_space_write_1(wdr->ctl_iot,
   1657  1.275   rkujawa 					    wdr->ctl_ioh, wd_aux_ctlr,
   1658  1.275   rkujawa 					    WDCTL_HOB|WDCTL_4BIT);
   1659  1.275   rkujawa 			}
   1660  1.268  jakllsch 			ata_c->r_count |= bus_space_read_1(wdr->cmd_iot,
   1661  1.268  jakllsch 			    wdr->cmd_iohs[wd_seccnt], 0) << 8;
   1662  1.268  jakllsch 			ata_c->r_lba |= (uint64_t)bus_space_read_1(wdr->cmd_iot,
   1663  1.268  jakllsch 			    wdr->cmd_iohs[wd_sector], 0) << 24;
   1664  1.268  jakllsch 			ata_c->r_lba |= (uint64_t)bus_space_read_1(wdr->cmd_iot,
   1665  1.268  jakllsch 			    wdr->cmd_iohs[wd_cyl_lo], 0) << 32;
   1666  1.268  jakllsch 			ata_c->r_lba |= (uint64_t)bus_space_read_1(wdr->cmd_iot,
   1667  1.268  jakllsch 			    wdr->cmd_iohs[wd_cyl_hi], 0) << 40;
   1668  1.275   rkujawa 			if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL)) {
   1669  1.275   rkujawa 				if ((ata_c->flags & AT_POLL) != 0)
   1670  1.275   rkujawa 					bus_space_write_1(wdr->ctl_iot,
   1671  1.275   rkujawa 					    wdr->ctl_ioh, wd_aux_ctlr,
   1672  1.275   rkujawa 					    WDCTL_4BIT|WDCTL_IDS);
   1673  1.275   rkujawa 				else
   1674  1.275   rkujawa 					bus_space_write_1(wdr->ctl_iot,
   1675  1.275   rkujawa 					    wdr->ctl_ioh, wd_aux_ctlr,
   1676  1.275   rkujawa 					    WDCTL_4BIT);
   1677  1.275   rkujawa 			}
   1678  1.268  jakllsch 		} else {
   1679  1.268  jakllsch 			ata_c->r_lba |=
   1680  1.268  jakllsch 			    (uint64_t)(ata_c->r_device & 0x0f) << 24;
   1681  1.268  jakllsch 		}
   1682  1.268  jakllsch 		ata_c->r_device &= 0xf0;
   1683  1.135    bouyer 	}
   1684  1.186    bouyer 	callout_stop(&chp->ch_callout);
   1685  1.187    bouyer 	chp->ch_queue->active_xfer = NULL;
   1686  1.192   thorpej 	if (ata_c->flags & AT_POLL) {
   1687  1.187    bouyer 		/* enable interrupts */
   1688  1.275   rkujawa 		if (! (wdc->cap & WDC_CAPABILITY_NO_AUXCTL))
   1689  1.275   rkujawa 			bus_space_write_1(wdr->ctl_iot, wdr->ctl_ioh,
   1690  1.275   rkujawa 			    wd_aux_ctlr, WDCTL_4BIT);
   1691  1.187    bouyer 		delay(10); /* some drives need a little delay here */
   1692  1.187    bouyer 	}
   1693  1.274    bouyer 	if (chp->ch_drive[xfer->c_drive].drive_flags & ATA_DRIVE_WAITDRAIN) {
   1694  1.187    bouyer 		__wdccommand_kill_xfer(chp, xfer, KILL_GONE);
   1695  1.274    bouyer 		chp->ch_drive[xfer->c_drive].drive_flags &= ~ATA_DRIVE_WAITDRAIN;
   1696  1.187    bouyer 		wakeup(&chp->ch_queue->active_xfer);
   1697  1.219     perry 	} else
   1698  1.187    bouyer 		__wdccommand_done_end(chp, xfer);
   1699  1.182    bouyer }
   1700  1.219     perry 
   1701  1.182    bouyer static void
   1702  1.205   thorpej __wdccommand_done_end(struct ata_channel *chp, struct ata_xfer *xfer)
   1703  1.182    bouyer {
   1704  1.192   thorpej 	struct ata_command *ata_c = xfer->c_cmd;
   1705  1.182    bouyer 
   1706  1.192   thorpej 	ata_c->flags |= AT_DONE;
   1707  1.198   thorpej 	ata_free_xfer(chp, xfer);
   1708  1.192   thorpej 	if (ata_c->flags & AT_WAIT)
   1709  1.192   thorpej 		wakeup(ata_c);
   1710  1.192   thorpej 	else if (ata_c->callback)
   1711  1.192   thorpej 		ata_c->callback(ata_c->callback_arg);
   1712  1.202   thorpej 	atastart(chp);
   1713   1.31    bouyer 	return;
   1714    1.2    bouyer }
   1715    1.2    bouyer 
   1716  1.182    bouyer static void
   1717  1.205   thorpej __wdccommand_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer,
   1718  1.182    bouyer     int reason)
   1719  1.182    bouyer {
   1720  1.192   thorpej 	struct ata_command *ata_c = xfer->c_cmd;
   1721  1.182    bouyer 
   1722  1.182    bouyer 	switch (reason) {
   1723  1.182    bouyer 	case KILL_GONE:
   1724  1.192   thorpej 		ata_c->flags |= AT_GONE;
   1725  1.219     perry 		break;
   1726  1.182    bouyer 	case KILL_RESET:
   1727  1.192   thorpej 		ata_c->flags |= AT_RESET;
   1728  1.182    bouyer 		break;
   1729  1.182    bouyer 	default:
   1730  1.182    bouyer 		printf("__wdccommand_kill_xfer: unknown reason %d\n",
   1731  1.182    bouyer 		    reason);
   1732  1.182    bouyer 		panic("__wdccommand_kill_xfer");
   1733  1.182    bouyer 	}
   1734  1.182    bouyer 	__wdccommand_done_end(chp, xfer);
   1735  1.182    bouyer }
   1736  1.182    bouyer 
   1737    1.2    bouyer /*
   1738   1.31    bouyer  * Send a command. The drive should be ready.
   1739    1.2    bouyer  * Assumes interrupts are blocked.
   1740    1.2    bouyer  */
   1741   1.31    bouyer void
   1742  1.205   thorpej wdccommand(struct ata_channel *chp, u_int8_t drive, u_int8_t command,
   1743  1.163   thorpej     u_int16_t cylin, u_int8_t head, u_int8_t sector, u_int8_t count,
   1744  1.178   thorpej     u_int8_t features)
   1745   1.31    bouyer {
   1746  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1747  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1748  1.163   thorpej 
   1749  1.204   thorpej 	ATADEBUG_PRINT(("wdccommand %s:%d:%d: command=0x%x cylin=%d head=%d "
   1750  1.253      cube 	    "sector=%d count=%d features=%d\n",
   1751  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel, drive,
   1752  1.253      cube 	    command, cylin, head, sector, count, features), DEBUG_FUNCS);
   1753   1.31    bouyer 
   1754  1.203   thorpej 	if (wdc->select)
   1755  1.169   thorpej 		wdc->select(chp,drive);
   1756  1.107       dbj 
   1757   1.31    bouyer 	/* Select drive, head, and addressing mode. */
   1758  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
   1759   1.31    bouyer 	    WDSD_IBM | (drive << 4) | head);
   1760  1.177   thorpej 	/* Load parameters into the wd_features register. */
   1761  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_features], 0,
   1762  1.178   thorpej 	    features);
   1763  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_seccnt], 0, count);
   1764  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sector], 0, sector);
   1765  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_cyl_lo], 0, cylin);
   1766  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_cyl_hi],
   1767  1.157      fvdl 	    0, cylin >> 8);
   1768  1.108  christos 
   1769  1.108  christos 	/* Send command. */
   1770  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_command], 0, command);
   1771  1.108  christos 	return;
   1772  1.108  christos }
   1773  1.108  christos 
   1774  1.108  christos /*
   1775  1.108  christos  * Send a 48-bit addressing command. The drive should be ready.
   1776  1.108  christos  * Assumes interrupts are blocked.
   1777  1.108  christos  */
   1778  1.108  christos void
   1779  1.205   thorpej wdccommandext(struct ata_channel *chp, u_int8_t drive, u_int8_t command,
   1780  1.277  jakllsch     u_int64_t blkno, u_int16_t count, u_int16_t features, u_int8_t device)
   1781  1.108  christos {
   1782  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1783  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1784  1.163   thorpej 
   1785  1.277  jakllsch 	ATADEBUG_PRINT(("wdccommandext %s:%d:%d: command=0x%02x "
   1786  1.277  jakllsch 	    "blkno=0x%012"PRIx64" count=0x%04x features=0x%04x "
   1787  1.277  jakllsch 	    "device=0x%02x\n", device_xname(chp->ch_atac->atac_dev),
   1788  1.277  jakllsch 	    chp->ch_channel, drive, command, blkno, count, features, device),
   1789  1.108  christos 	    DEBUG_FUNCS);
   1790  1.108  christos 
   1791  1.277  jakllsch 	KASSERT(drive < wdc->wdc_maxdrives);
   1792  1.277  jakllsch 
   1793  1.203   thorpej 	if (wdc->select)
   1794  1.169   thorpej 		wdc->select(chp,drive);
   1795  1.108  christos 
   1796  1.108  christos 	/* Select drive, head, and addressing mode. */
   1797  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
   1798  1.277  jakllsch 	    (drive << 4) | device);
   1799  1.108  christos 
   1800  1.218  rearnsha 	if (wdc->cap & WDC_CAPABILITY_WIDEREGS) {
   1801  1.267  jakllsch 		bus_space_write_2(wdr->cmd_iot, wdr->cmd_iohs[wd_features],
   1802  1.267  jakllsch 		    0, features);
   1803  1.218  rearnsha 		bus_space_write_2(wdr->cmd_iot, wdr->cmd_iohs[wd_seccnt],
   1804  1.218  rearnsha 		    0, count);
   1805  1.218  rearnsha 		bus_space_write_2(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_lo],
   1806  1.218  rearnsha 		    0, (((blkno >> 16) & 0xff00) | (blkno & 0x00ff)));
   1807  1.218  rearnsha 		bus_space_write_2(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_mi],
   1808  1.218  rearnsha 		    0, (((blkno >> 24) & 0xff00) | ((blkno >> 8) & 0x00ff)));
   1809  1.218  rearnsha 		bus_space_write_2(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_hi],
   1810  1.218  rearnsha 		    0, (((blkno >> 32) & 0xff00) | ((blkno >> 16) & 0x00ff)));
   1811  1.218  rearnsha 	} else {
   1812  1.218  rearnsha 		/* previous */
   1813  1.267  jakllsch 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_features],
   1814  1.267  jakllsch 		    0, features >> 8);
   1815  1.218  rearnsha 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_seccnt],
   1816  1.218  rearnsha 		    0, count >> 8);
   1817  1.218  rearnsha 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_lo],
   1818  1.218  rearnsha 		    0, blkno >> 24);
   1819  1.218  rearnsha 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_mi],
   1820  1.218  rearnsha 		    0, blkno >> 32);
   1821  1.218  rearnsha 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_hi],
   1822  1.218  rearnsha 		    0, blkno >> 40);
   1823  1.218  rearnsha 
   1824  1.218  rearnsha 		/* current */
   1825  1.267  jakllsch 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_features],
   1826  1.267  jakllsch 		    0, features);
   1827  1.267  jakllsch 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_seccnt],
   1828  1.267  jakllsch 		    0, count);
   1829  1.267  jakllsch 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_lo],
   1830  1.267  jakllsch 		    0, blkno);
   1831  1.218  rearnsha 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_mi],
   1832  1.218  rearnsha 		    0, blkno >> 8);
   1833  1.218  rearnsha 		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_lba_hi],
   1834  1.218  rearnsha 		    0, blkno >> 16);
   1835  1.218  rearnsha 	}
   1836    1.2    bouyer 
   1837   1.31    bouyer 	/* Send command. */
   1838  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_command], 0, command);
   1839   1.31    bouyer 	return;
   1840    1.2    bouyer }
   1841    1.2    bouyer 
   1842    1.2    bouyer /*
   1843   1.31    bouyer  * Simplified version of wdccommand().  Unbusy/ready/drq must be
   1844   1.31    bouyer  * tested by the caller.
   1845    1.2    bouyer  */
   1846   1.31    bouyer void
   1847  1.205   thorpej wdccommandshort(struct ata_channel *chp, int drive, int command)
   1848    1.2    bouyer {
   1849  1.207   thorpej 	struct wdc_softc *wdc = CHAN_TO_WDC(chp);
   1850  1.205   thorpej 	struct wdc_regs *wdr = &wdc->regs[chp->ch_channel];
   1851    1.2    bouyer 
   1852  1.204   thorpej 	ATADEBUG_PRINT(("wdccommandshort %s:%d:%d command 0x%x\n",
   1853  1.253      cube 	    device_xname(chp->ch_atac->atac_dev), chp->ch_channel, drive,
   1854  1.253      cube 	    command), DEBUG_FUNCS);
   1855  1.107       dbj 
   1856  1.203   thorpej 	if (wdc->select)
   1857  1.169   thorpej 		wdc->select(chp,drive);
   1858    1.2    bouyer 
   1859   1.31    bouyer 	/* Select drive. */
   1860  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
   1861   1.31    bouyer 	    WDSD_IBM | (drive << 4));
   1862    1.2    bouyer 
   1863  1.205   thorpej 	bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_command], 0, command);
   1864   1.31    bouyer }
   1865    1.2    bouyer 
   1866   1.31    bouyer static void
   1867  1.222  christos __wdcerror(struct ata_channel *chp, const char *msg)
   1868    1.2    bouyer {
   1869  1.207   thorpej 	struct atac_softc *atac = chp->ch_atac;
   1870  1.217    bouyer 	struct ata_xfer *xfer = chp->ch_queue->active_xfer;
   1871   1.88       mrg 
   1872    1.2    bouyer 	if (xfer == NULL)
   1873  1.253      cube 		aprint_error("%s:%d: %s\n", device_xname(atac->atac_dev),
   1874  1.253      cube 		    chp->ch_channel, msg);
   1875    1.2    bouyer 	else
   1876  1.253      cube 		aprint_error("%s:%d:%d: %s\n", device_xname(atac->atac_dev),
   1877  1.169   thorpej 		    chp->ch_channel, xfer->c_drive, msg);
   1878    1.2    bouyer }
   1879    1.2    bouyer 
   1880  1.219     perry /*
   1881    1.2    bouyer  * the bit bucket
   1882    1.2    bouyer  */
   1883    1.2    bouyer void
   1884  1.205   thorpej wdcbit_bucket(struct ata_channel *chp, int size)
   1885    1.2    bouyer {
   1886  1.207   thorpej 	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(chp);
   1887    1.2    bouyer 
   1888   1.12       cgd 	for (; size >= 2; size -= 2)
   1889  1.205   thorpej 		(void)bus_space_read_2(wdr->cmd_iot, wdr->cmd_iohs[wd_data], 0);
   1890   1.12       cgd 	if (size)
   1891  1.205   thorpej 		(void)bus_space_read_1(wdr->cmd_iot, wdr->cmd_iohs[wd_data], 0);
   1892   1.44   thorpej }
   1893   1.44   thorpej 
   1894  1.213   thorpej static void
   1895  1.222  christos wdc_datain_pio(struct ata_channel *chp, int flags, void *bf, size_t len)
   1896  1.190   mycroft {
   1897  1.207   thorpej 	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(chp);
   1898  1.190   mycroft 
   1899  1.244    martin #ifndef __NO_STRICT_ALIGNMENT
   1900  1.244    martin 	if ((uintptr_t)bf & 1)
   1901  1.244    martin 		goto unaligned;
   1902  1.274    bouyer 	if ((flags & ATA_DRIVE_CAP32) && ((uintptr_t)bf & 3))
   1903  1.244    martin 		goto unaligned;
   1904  1.244    martin #endif
   1905  1.244    martin 
   1906  1.274    bouyer 	if (flags & ATA_DRIVE_NOSTREAM) {
   1907  1.274    bouyer 		if ((flags & ATA_DRIVE_CAP32) && len > 3) {
   1908  1.205   thorpej 			bus_space_read_multi_4(wdr->data32iot,
   1909  1.222  christos 			    wdr->data32ioh, 0, bf, len >> 2);
   1910  1.222  christos 			bf = (char *)bf + (len & ~3);
   1911  1.190   mycroft 			len &= 3;
   1912  1.190   mycroft 		}
   1913  1.273  christos 		if (len > 1) {
   1914  1.205   thorpej 			bus_space_read_multi_2(wdr->cmd_iot,
   1915  1.222  christos 			    wdr->cmd_iohs[wd_data], 0, bf, len >> 1);
   1916  1.273  christos 			bf = (char *)bf + (len & ~1);
   1917  1.273  christos 			len &= 1;
   1918  1.190   mycroft 		}
   1919  1.190   mycroft 	} else {
   1920  1.274    bouyer 		if ((flags & ATA_DRIVE_CAP32) && len > 3) {
   1921  1.205   thorpej 			bus_space_read_multi_stream_4(wdr->data32iot,
   1922  1.222  christos 			    wdr->data32ioh, 0, bf, len >> 2);
   1923  1.222  christos 			bf = (char *)bf + (len & ~3);
   1924  1.190   mycroft 			len &= 3;
   1925  1.190   mycroft 		}
   1926  1.273  christos 		if (len > 1) {
   1927  1.205   thorpej 			bus_space_read_multi_stream_2(wdr->cmd_iot,
   1928  1.222  christos 			    wdr->cmd_iohs[wd_data], 0, bf, len >> 1);
   1929  1.273  christos 			bf = (char *)bf + (len & ~1);
   1930  1.273  christos 			len &= 1;
   1931  1.190   mycroft 		}
   1932  1.190   mycroft 	}
   1933  1.273  christos 	if (len)
   1934  1.273  christos 		*((uint8_t *)bf) = bus_space_read_1(wdr->cmd_iot,
   1935  1.273  christos 			    wdr->cmd_iohs[wd_data], 0);
   1936  1.244    martin 	return;
   1937  1.244    martin 
   1938  1.244    martin #ifndef __NO_STRICT_ALIGNMENT
   1939  1.244    martin unaligned:
   1940  1.274    bouyer 	if (flags & ATA_DRIVE_NOSTREAM) {
   1941  1.274    bouyer 		if (flags & ATA_DRIVE_CAP32) {
   1942  1.245    bouyer 			while (len > 3) {
   1943  1.245    bouyer 				uint32_t val;
   1944  1.245    bouyer 
   1945  1.245    bouyer 				val = bus_space_read_4(wdr->data32iot,
   1946  1.245    bouyer 				    wdr->data32ioh, 0);
   1947  1.245    bouyer 				memcpy(bf, &val, 4);
   1948  1.245    bouyer 				bf = (char *)bf + 4;
   1949  1.245    bouyer 				len -= 4;
   1950  1.245    bouyer 			}
   1951  1.245    bouyer 		}
   1952  1.245    bouyer 		while (len > 1) {
   1953  1.245    bouyer 			uint16_t val;
   1954  1.245    bouyer 
   1955  1.245    bouyer 			val = bus_space_read_2(wdr->cmd_iot,
   1956  1.245    bouyer 			    wdr->cmd_iohs[wd_data], 0);
   1957  1.245    bouyer 			memcpy(bf, &val, 2);
   1958  1.245    bouyer 			bf = (char *)bf + 2;
   1959  1.245    bouyer 			len -= 2;
   1960  1.245    bouyer 		}
   1961  1.245    bouyer 	} else {
   1962  1.274    bouyer 		if (flags & ATA_DRIVE_CAP32) {
   1963  1.245    bouyer 			while (len > 3) {
   1964  1.245    bouyer 				uint32_t val;
   1965  1.244    martin 
   1966  1.245    bouyer 				val = bus_space_read_stream_4(wdr->data32iot,
   1967  1.245    bouyer 				    wdr->data32ioh, 0);
   1968  1.245    bouyer 				memcpy(bf, &val, 4);
   1969  1.245    bouyer 				bf = (char *)bf + 4;
   1970  1.245    bouyer 				len -= 4;
   1971  1.245    bouyer 			}
   1972  1.245    bouyer 		}
   1973  1.245    bouyer 		while (len > 1) {
   1974  1.245    bouyer 			uint16_t val;
   1975  1.245    bouyer 
   1976  1.245    bouyer 			val = bus_space_read_stream_2(wdr->cmd_iot,
   1977  1.244    martin 			    wdr->cmd_iohs[wd_data], 0);
   1978  1.245    bouyer 			memcpy(bf, &val, 2);
   1979  1.245    bouyer 			bf = (char *)bf + 2;
   1980  1.245    bouyer 			len -= 2;
   1981  1.244    martin 		}
   1982  1.244    martin 	}
   1983  1.244    martin #endif
   1984  1.190   mycroft }
   1985  1.190   mycroft 
   1986  1.213   thorpej static void
   1987  1.222  christos wdc_dataout_pio(struct ata_channel *chp, int flags, void *bf, size_t len)
   1988  1.190   mycroft {
   1989  1.207   thorpej 	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(chp);
   1990  1.190   mycroft 
   1991  1.244    martin #ifndef __NO_STRICT_ALIGNMENT
   1992  1.244    martin 	if ((uintptr_t)bf & 1)
   1993  1.244    martin 		goto unaligned;
   1994  1.274    bouyer 	if ((flags & ATA_DRIVE_CAP32) && ((uintptr_t)bf & 3))
   1995  1.244    martin 		goto unaligned;
   1996  1.244    martin #endif
   1997  1.244    martin 
   1998  1.274    bouyer 	if (flags & ATA_DRIVE_NOSTREAM) {
   1999  1.274    bouyer 		if (flags & ATA_DRIVE_CAP32) {
   2000  1.205   thorpej 			bus_space_write_multi_4(wdr->data32iot,
   2001  1.222  christos 			    wdr->data32ioh, 0, bf, len >> 2);
   2002  1.222  christos 			bf = (char *)bf + (len & ~3);
   2003  1.190   mycroft 			len &= 3;
   2004  1.190   mycroft 		}
   2005  1.190   mycroft 		if (len) {
   2006  1.205   thorpej 			bus_space_write_multi_2(wdr->cmd_iot,
   2007  1.222  christos 			    wdr->cmd_iohs[wd_data], 0, bf, len >> 1);
   2008  1.190   mycroft 		}
   2009  1.190   mycroft 	} else {
   2010  1.274    bouyer 		if (flags & ATA_DRIVE_CAP32) {
   2011  1.205   thorpej 			bus_space_write_multi_stream_4(wdr->data32iot,
   2012  1.222  christos 			    wdr->data32ioh, 0, bf, len >> 2);
   2013  1.222  christos 			bf = (char *)bf + (len & ~3);
   2014  1.190   mycroft 			len &= 3;
   2015  1.190   mycroft 		}
   2016  1.190   mycroft 		if (len) {
   2017  1.205   thorpej 			bus_space_write_multi_stream_2(wdr->cmd_iot,
   2018  1.222  christos 			    wdr->cmd_iohs[wd_data], 0, bf, len >> 1);
   2019  1.190   mycroft 		}
   2020  1.190   mycroft 	}
   2021  1.244    martin 	return;
   2022  1.244    martin 
   2023  1.244    martin #ifndef __NO_STRICT_ALIGNMENT
   2024  1.244    martin unaligned:
   2025  1.274    bouyer 	if (flags & ATA_DRIVE_NOSTREAM) {
   2026  1.274    bouyer 		if (flags & ATA_DRIVE_CAP32) {
   2027  1.245    bouyer 			while (len > 3) {
   2028  1.245    bouyer 				uint32_t val;
   2029  1.244    martin 
   2030  1.245    bouyer 				memcpy(&val, bf, 4);
   2031  1.245    bouyer 				bus_space_write_4(wdr->data32iot,
   2032  1.245    bouyer 				    wdr->data32ioh, 0, val);
   2033  1.245    bouyer 				bf = (char *)bf + 4;
   2034  1.245    bouyer 				len -= 4;
   2035  1.245    bouyer 			}
   2036  1.245    bouyer 		}
   2037  1.245    bouyer 		while (len > 1) {
   2038  1.245    bouyer 			uint16_t val;
   2039  1.245    bouyer 
   2040  1.245    bouyer 			memcpy(&val, bf, 2);
   2041  1.245    bouyer 			bus_space_write_2(wdr->cmd_iot,
   2042  1.244    martin 			    wdr->cmd_iohs[wd_data], 0, val);
   2043  1.245    bouyer 			bf = (char *)bf + 2;
   2044  1.245    bouyer 			len -= 2;
   2045  1.244    martin 		}
   2046  1.245    bouyer 	} else {
   2047  1.274    bouyer 		if (flags & ATA_DRIVE_CAP32) {
   2048  1.245    bouyer 			while (len > 3) {
   2049  1.245    bouyer 				uint32_t val;
   2050  1.245    bouyer 
   2051  1.245    bouyer 				memcpy(&val, bf, 4);
   2052  1.245    bouyer 				bus_space_write_stream_4(wdr->data32iot,
   2053  1.245    bouyer 				    wdr->data32ioh, 0, val);
   2054  1.245    bouyer 				bf = (char *)bf + 4;
   2055  1.245    bouyer 				len -= 4;
   2056  1.245    bouyer 			}
   2057  1.245    bouyer 		}
   2058  1.245    bouyer 		while (len > 1) {
   2059  1.245    bouyer 			uint16_t val;
   2060  1.244    martin 
   2061  1.245    bouyer 			memcpy(&val, bf, 2);
   2062  1.245    bouyer 			bus_space_write_stream_2(wdr->cmd_iot,
   2063  1.245    bouyer 			    wdr->cmd_iohs[wd_data], 0, val);
   2064  1.245    bouyer 			bf = (char *)bf + 2;
   2065  1.245    bouyer 			len -= 2;
   2066  1.245    bouyer 		}
   2067  1.244    martin 	}
   2068  1.244    martin #endif
   2069  1.190   mycroft }
   2070