wireg.h revision 1.10
1 /* $NetBSD: wireg.h,v 1.10 2001/09/22 17:22:25 explorer Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul (at) ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the 37 * Oslo IETF plenary meeting. 38 */ 39 40 #define WI_TIMEOUT 65536 41 42 #define WI_PORT0 0 43 #define WI_PORT1 1 44 #define WI_PORT2 2 45 #define WI_PORT3 3 46 #define WI_PORT4 4 47 #define WI_PORT5 5 48 49 /* Default port: 0 (only 0 exists on stations) */ 50 #define WI_DEFAULT_PORT (WI_PORT0 << 8) 51 52 /* Default TX rate: 2Mbps, auto fallback */ 53 #define WI_DEFAULT_TX_RATE 3 54 55 /* Default network name: ANY */ 56 /* 57 * [sommerfeld 1999/07/15] Changed from "ANY" to ""; according to Bill Fenner, 58 * ANY is used in MS driver user interfaces, while "" is used over the 59 * wire.. 60 */ 61 #define WI_DEFAULT_NETNAME "" 62 63 #define WI_DEFAULT_AP_DENSITY 1 64 65 #define WI_DEFAULT_RTS_THRESH 2347 66 67 #define WI_DEFAULT_DATALEN 2304 68 69 #define WI_DEFAULT_CREATE_IBSS 0 70 71 #define WI_DEFAULT_PM_ENABLED 0 72 73 #define WI_DEFAULT_MAX_SLEEP 100 74 75 #define WI_DEFAULT_ROAMING 1 76 77 #define WI_DEFAULT_AUTHTYPE 1 78 79 #ifdef __NetBSD__ 80 #define OS_STRING_NAME "NetBSD" 81 #endif 82 #ifdef __FreeBSD__ 83 #define OS_STRING_NAME "FreeBSD" 84 #endif 85 #ifdef __OpenBSD__ 86 #define OS_STRING_NAME "OpenBSD" 87 #endif 88 89 #define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node" 90 91 #define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS" 92 93 #define WI_DEFAULT_CHAN 3 94 95 /* 96 * register space access macros 97 */ 98 #define CSR_WRITE_4(sc, reg, val) \ 99 bus_space_write_4(sc->sc_iot, sc->sc_ioh, reg, val) 100 #define CSR_WRITE_2(sc, reg, val) \ 101 bus_space_write_2(sc->sc_iot, sc->sc_ioh, reg, val) 102 #define CSR_WRITE_1(sc, reg, val) \ 103 bus_space_write_1(sc->sc_iot, sc->sc_ioh, reg, val) 104 105 #define CSR_READ_4(sc, reg) \ 106 bus_space_read_4(sc->sc_iot, sc->sc_ioh, reg) 107 #define CSR_READ_2(sc, reg) \ 108 bus_space_read_2(sc->sc_iot, sc->sc_ioh, reg) 109 #define CSR_READ_1(sc, reg) \ 110 bus_space_read_1(sc->sc_iot, sc->sc_ioh, reg) 111 112 #ifndef __BUS_SPACE_HAS_STREAM_METHODS 113 #define bus_space_write_stream_2 bus_space_write_2 114 #define bus_space_write_multi_stream_2 bus_space_write_multi_2 115 #define bus_space_read_stream_2 bus_space_read_2 116 #define bus_space_read_multi_stream_2 bus_space_read_multi_2 117 #endif 118 119 #define CSR_WRITE_STREAM_2(sc, reg, val) \ 120 bus_space_write_stream_2(sc->sc_iot, sc->sc_ioh, reg, val) 121 #define CSR_WRITE_MULTI_STREAM_2(sc, reg, val, count) \ 122 bus_space_write_multi_stream_2(sc->sc_iot, sc->sc_ioh, reg, val, count) 123 #define CSR_READ_STREAM_2(sc, reg) \ 124 bus_space_read_stream_2(sc->sc_iot, sc->sc_ioh, reg) 125 #define CSR_READ_MULTI_STREAM_2(sc, reg, buf, count) \ 126 bus_space_read_multi_stream_2(sc->sc_iot, sc->sc_ioh, reg, buf, count) 127 128 /* 129 * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent 130 * calls 'Hermes.' In typical fashion, getting documentation about this 131 * controller is about as easy as squeezing blood from a stone. Here 132 * is more or less what I know: 133 * 134 * - The Hermes controller is firmware driven, and the host interacts 135 * with the Hermes via a firmware interface, which can change. 136 * 137 * - The Hermes is described in a document called: "Hermes Firmware 138 * WaveLAN/IEEE Station Functions," document #010245, which of course 139 * Lucent will not release without an NDA. 140 * 141 * - Lucent has created a library called HCF (Hardware Control Functions) 142 * though which it wants developers to interact with the card. The HCF 143 * is needlessly complex, ill conceived and badly documented. Actually, 144 * the comments in the HCP code itself aren't bad, but the publically 145 * available manual that comes with it is awful, probably due largely to 146 * the fact that it has been emasculated in order to hide information 147 * that Lucent wants to keep proprietary. The purpose of the HCF seems 148 * to be to insulate the driver programmer from the Hermes itself so that 149 * Lucent has an excuse not to release programming in for it. 150 * 151 * - Lucent only makes available documentation and code for 'HCF Light' 152 * which is a stripped down version of HCF with certain features not 153 * implemented, most notably support for 802.11 frames. 154 * 155 * - The HCF code which I have seen blows goats. Whoever decided to 156 * use a 132 column format should be shot. 157 * 158 * Rather than actually use the Lucent HCF library, I have stripped all 159 * the useful information from it and used it to create a driver in the 160 * usual BSD form. Note: I don't want to hear anybody whining about the 161 * fact that the Lucent code is GPLed and mine isn't. I did not actually 162 * put any of Lucent's code in this driver: I only used it as a reference 163 * to obtain information about the underlying hardware. The Hermes 164 * programming interface is not GPLed, so bite me. 165 */ 166 167 /* 168 * Size of Hermes I/O space. 169 */ 170 #define WI_IOSIZE 0x40 171 172 /* 173 * Hermes register definitions and what little I know about them. 174 */ 175 176 /* Hermes command/status registers. */ 177 #define WI_COMMAND 0x00 178 #define WI_PARAM0 0x02 179 #define WI_PARAM1 0x04 180 #define WI_PARAM2 0x06 181 #define WI_STATUS 0x08 182 #define WI_RESP0 0x0A 183 #define WI_RESP1 0x0C 184 #define WI_RESP2 0x0E 185 186 /* Command register values. */ 187 #define WI_CMD_BUSY 0x8000 /* busy bit */ 188 #define WI_CMD_INI 0x0000 /* initialize */ 189 #define WI_CMD_ENABLE 0x0001 /* enable */ 190 #define WI_CMD_DISABLE 0x0002 /* disable */ 191 #define WI_CMD_DIAG 0x0003 192 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ 193 #define WI_CMD_TX 0x000B /* transmit */ 194 #define WI_CMD_NOTIFY 0x0010 195 #define WI_CMD_INQUIRE 0x0011 196 #define WI_CMD_ACCESS 0x0021 197 #define WI_CMD_PROGRAM 0x0022 198 #define WI_CMD_READMIF 0x0030 /* prism2 only? */ 199 #define WI_CMD_WRITEMIF 0x0031 /* prism2 only? */ 200 #define WI_CMD_TEST 0x0038 /* prism2 only? */ 201 202 #define WI_CMD_CODE_MASK 0x003F 203 204 /* 205 * prism2 test mode commands 206 */ 207 #define WI_TEST_MONITOR 0x000b 208 #define WI_TEST_STOP 0x000f 209 210 /* 211 * Reclaim qualifier bit, applicable to the 212 * TX and INQUIRE commands. 213 */ 214 #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ 215 216 /* 217 * ACCESS command qualifier bits. 218 */ 219 #define WI_ACCESS_READ 0x0000 220 #define WI_ACCESS_WRITE 0x0100 221 222 /* 223 * PROGRAM command qualifier bits. 224 */ 225 #define WI_PROGRAM_DISABLE 0x0000 226 #define WI_PROGRAM_ENABLE_RAM 0x0100 227 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 228 #define WI_PROGRAM_NVRAM 0x0300 229 230 /* Status register values */ 231 #define WI_STAT_CMD_CODE 0x003F 232 #define WI_STAT_DIAG_ERR 0x0100 233 #define WI_STAT_INQ_ERR 0x0500 234 #define WI_STAT_CMD_RESULT 0x7F00 235 236 /* memory handle management registers */ 237 #define WI_INFO_FID 0x10 238 #define WI_RX_FID 0x20 239 #define WI_ALLOC_FID 0x22 240 #define WI_TX_CMP_FID 0x24 241 242 /* 243 * Buffer Access Path (BAP) registers. 244 * These are I/O channels. I believe you can use each one for 245 * any desired purpose independently of the other. In general 246 * though, we use BAP1 for reading and writing LTV records and 247 * reading received data frames, and BAP0 for writing transmit 248 * frames. This is a convention though, not a rule. 249 */ 250 #define WI_SEL0 0x18 251 #define WI_SEL1 0x1A 252 #define WI_OFF0 0x1C 253 #define WI_OFF1 0x1E 254 #define WI_DATA0 0x36 255 #define WI_DATA1 0x38 256 #define WI_BAP0 WI_DATA0 257 #define WI_BAP1 WI_DATA1 258 259 #define WI_OFF_BUSY 0x8000 260 #define WI_OFF_ERR 0x4000 261 #define WI_OFF_DATAOFF 0x0FFF 262 263 /* Event registers */ 264 #define WI_EVENT_STAT 0x30 /* Event status */ 265 #define WI_INT_EN 0x32 /* Interrupt enable/disable */ 266 #define WI_EVENT_ACK 0x34 /* Ack event */ 267 268 /* Events */ 269 #define WI_EV_TICK 0x8000 /* aux timer tick */ 270 #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ 271 #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ 272 #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ 273 #define WI_EV_AWAKE 0x0100 274 #define WI_EV_INFO 0x0080 /* async info frame */ 275 #define WI_EV_CMD 0x0010 /* command completed */ 276 #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ 277 #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ 278 #define WI_EV_TX 0x0002 /* async xmit completed succesfully */ 279 #define WI_EV_RX 0x0001 /* async rx completed */ 280 281 #define WI_INTRS \ 282 (WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP) 283 284 /* Host software registers */ 285 #define WI_SW0 0x28 286 #define WI_SW1 0x2A 287 #define WI_SW2 0x2C 288 #define WI_SW3 0x2E 289 290 #define WI_CNTL 0x14 291 292 #define WI_CNTL_AUX_ENA 0xC000 293 #define WI_CNTL_AUX_ENA_STAT 0xC000 294 #define WI_CNTL_AUX_DIS_STAT 0x0000 295 #define WI_CNTL_AUX_ENA_CNTL 0x8000 296 #define WI_CNTL_AUX_DIS_CNTL 0x4000 297 298 #define WI_AUX_PAGE 0x3A 299 #define WI_AUX_OFFSET 0x3C 300 #define WI_AUX_DATA 0x3E 301 302 /* 303 * One form of communication with the Hermes is with what Lucent calls 304 * LTV records, where LTV stands for Length, Type and Value. The length 305 * and type are 16 bits and are in native byte order. The value is in 306 * multiples of 16 bits and is in little endian byte order. 307 */ 308 struct wi_ltv_gen { 309 u_int16_t wi_len; 310 u_int16_t wi_type; 311 u_int16_t wi_val; 312 }; 313 314 struct wi_ltv_str { 315 u_int16_t wi_len; 316 u_int16_t wi_type; 317 u_int16_t wi_str[17]; 318 }; 319 320 #define WI_SETVAL(recno, val) \ 321 do { \ 322 struct wi_ltv_gen g; \ 323 \ 324 g.wi_len = 2; \ 325 g.wi_type = recno; \ 326 g.wi_val = htole16(val); \ 327 wi_write_record(sc, &g); \ 328 } while (0) 329 330 #define WI_SETSTR(recno, str) \ 331 do { \ 332 struct wi_ltv_str s; \ 333 int l; \ 334 \ 335 l = (strlen(str) + 1) & ~0x1; \ 336 memset((char *)&s, 0, sizeof(s)); \ 337 s.wi_len = (l / 2) + 2; \ 338 s.wi_type = recno; \ 339 s.wi_str[0] = htole16(strlen(str)); \ 340 memcpy((char *)&s.wi_str[1], str, strlen(str)); \ 341 wi_write_record(sc, (struct wi_ltv_gen *)&s); \ 342 } while (0) 343 344 /* 345 * Download buffer location and length (0xFD01). 346 */ 347 #define WI_RID_DNLD_BUF 0xFD01 348 struct wi_ltv_dnld_buf { 349 u_int16_t wi_len; 350 u_int16_t wi_type; 351 u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ 352 u_int16_t wi_buf_off; /* offset of idb */ 353 u_int16_t wi_buf_len; /* len of idb */ 354 }; 355 356 /* 357 * Mem sizes (0xFD02). 358 */ 359 #define WI_RID_MEMSZ 0xFD02 360 struct wi_ltv_memsz { 361 u_int16_t wi_len; 362 u_int16_t wi_type; 363 u_int16_t wi_mem_ram; 364 u_int16_t wi_mem_nvram; 365 }; 366 367 /* 368 * NIC Identification (0xFD0B) 369 */ 370 #define WI_RID_CARDID 0xFD0B 371 #define WI_RID_IDENT 0xFD20 372 struct wi_ltv_ver { 373 u_int16_t wi_len; 374 u_int16_t wi_type; 375 u_int16_t wi_ver[4]; 376 #define WI_NIC_EVB2 0x8000 377 #define WI_NIC_HWB3763 0x8001 378 #define WI_NIC_HWB3163 0x8002 379 #define WI_NIC_HWB3163B 0x8003 380 #define WI_NIC_EVB3 0x8004 381 #define WI_NIC_HWB1153 0x8007 382 #define WI_NIC_P2_SST 0x8008 /* Prism2 with SST flush */ 383 #define WI_NIC_PRISM2_5 0x800C 384 }; 385 386 /* 387 * List of intended regulatory domains (0xFD11). 388 */ 389 #define WI_RID_DOMAINS 0xFD11 390 struct wi_ltv_domains { 391 u_int16_t wi_len; 392 u_int16_t wi_type; 393 u_int16_t wi_domains[6]; 394 }; 395 396 /* 397 * CIS struct (0xFD13). 398 */ 399 #define WI_RID_CIS 0xFD13 400 struct wi_ltv_cis { 401 u_int16_t wi_len; 402 u_int16_t wi_type; 403 u_int16_t wi_cis[240]; 404 }; 405 406 /* 407 * Communications quality (0xFD43). 408 */ 409 #define WI_RID_COMMQUAL 0xFD43 410 struct wi_ltv_commqual { 411 u_int16_t wi_len; 412 u_int16_t wi_type; 413 u_int16_t wi_coms_qual; 414 u_int16_t wi_sig_lvl; 415 u_int16_t wi_noise_lvl; 416 }; 417 418 /* 419 * Actual system scale thresholds (0xFD46). 420 */ 421 #define WI_RID_SYSTEM_SCALE 0xFC06 422 #define WI_RID_SCALETHRESH 0xFD46 423 struct wi_ltv_scalethresh { 424 u_int16_t wi_len; 425 u_int16_t wi_type; 426 u_int16_t wi_energy_detect; 427 u_int16_t wi_carrier_detect; 428 u_int16_t wi_defer; 429 u_int16_t wi_cell_search; 430 u_int16_t wi_out_of_range; 431 u_int16_t wi_delta_snr; 432 }; 433 434 /* 435 * PCF info struct (0xFD87). 436 */ 437 #define WI_RID_PCF 0xFD87 438 struct wi_ltv_pcf { 439 u_int16_t wi_len; 440 u_int16_t wi_type; 441 u_int16_t wi_medium_occupancy_limit; 442 u_int16_t wi_cfp_period; 443 u_int16_t wi_cfp_max_duration; 444 }; 445 446 /* 447 * Connection control characteristics. 448 * 1 == Basic Service Set (BSS) 449 * 2 == Wireless Distribudion System (WDS) 450 * 3 == Pseudo IBSS 451 */ 452 #define WI_RID_PORTTYPE 0xFC00 453 #define WI_PORTTYPE_BSS 0x1 454 #define WI_PORTTYPE_WDS 0x2 455 #define WI_PORTTYPE_ADHOC 0x3 456 457 /* 458 * Mac addresses. 459 */ 460 #define WI_RID_MAC_NODE 0xFC01 461 #define WI_RID_MAC_WDS 0xFC08 462 struct wi_ltv_macaddr { 463 u_int16_t wi_len; 464 u_int16_t wi_type; 465 u_int8_t wi_mac_addr[6]; 466 }; 467 468 /* 469 * Station set identification (SSID). 470 */ 471 #define WI_RID_DESIRED_SSID 0xFC02 472 #define WI_RID_OWN_SSID 0xFC04 473 struct wi_ltv_ssid { 474 u_int16_t wi_len; 475 u_int16_t wi_type; 476 u_int16_t wi_id[17]; 477 }; 478 479 /* 480 * Set communications channel (radio frequency). 481 */ 482 #define WI_RID_OWN_CHNL 0xFC03 483 484 /* 485 * Frame data size. 486 */ 487 #define WI_RID_MAX_DATALEN 0xFC07 488 489 /* 490 * ESS power management enable 491 */ 492 #define WI_RID_PM_ENABLED 0xFC09 493 494 /* 495 * ESS max PM sleep internal 496 */ 497 #define WI_RID_MAX_SLEEP 0xFC0C 498 499 /* 500 * Set our station name. 501 */ 502 #define WI_RID_NODENAME 0xFC0E 503 struct wi_ltv_nodename { 504 u_int16_t wi_len; 505 u_int16_t wi_type; 506 u_int16_t wi_nodename[17]; 507 }; 508 509 /* 510 * Multicast addresses to be put in filter. We're 511 * allowed up to 16 addresses in the filter. 512 */ 513 #define WI_RID_MCAST 0xFC80 514 struct wi_ltv_mcast { 515 u_int16_t wi_len; 516 u_int16_t wi_type; 517 struct ether_addr wi_mcast[16]; 518 }; 519 520 /* 521 * Create IBSS. 522 */ 523 #define WI_RID_CREATE_IBSS 0xFC81 524 525 #define WI_RID_FRAG_THRESH 0xFC82 526 #define WI_RID_RTS_THRESH 0xFC83 527 528 /* 529 * TX rate control 530 * 0 == Fixed 1mbps 531 * 1 == Fixed 2mbps 532 * 2 == auto fallback 533 */ 534 #define WI_RID_TX_RATE 0xFC84 535 536 /* 537 * promiscuous mode. 538 */ 539 #define WI_RID_PROMISC 0xFC85 540 541 /* 542 * Auxiliary Timer tick interval 543 */ 544 #define WI_RID_TICK_TIME 0xFCE0 545 546 /* 547 * Information frame types. 548 */ 549 #define WI_INFO_NOTIFY 0xF000 /* Handover address */ 550 #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ 551 #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ 552 #define WI_INFO_LINK_STAT 0xF200 /* Link status */ 553 #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ 554 555 /* 556 * Hermes transmit/receive frame structure 557 */ 558 struct wi_frame { 559 u_int16_t wi_status; /* 0x00 */ 560 u_int16_t wi_rsvd0; /* 0x02 */ 561 u_int16_t wi_rsvd1; /* 0x04 */ 562 u_int16_t wi_q_info; /* 0x06 */ 563 u_int16_t wi_rsvd2; /* 0x08 */ 564 u_int16_t wi_rsvd3; /* 0x0A */ 565 u_int16_t wi_tx_ctl; /* 0x0C */ 566 /* 802.11 */ 567 u_int16_t wi_frame_ctl; /* 0x0E */ 568 u_int16_t wi_id; /* 0x10 */ 569 u_int8_t wi_addr1[6]; /* 0x12 */ 570 u_int8_t wi_addr2[6]; /* 0x18 */ 571 u_int8_t wi_addr3[6]; /* 0x1E */ 572 u_int16_t wi_seq_ctl; /* 0x24 */ 573 u_int8_t wi_addr4[6]; /* 0x26 */ 574 u_int16_t wi_dat_len; /* 0x2C */ 575 /* 802.3 */ 576 u_int8_t wi_dst_addr[6]; /* 0x2E */ 577 u_int8_t wi_src_addr[6]; /* 0x34 */ 578 u_int16_t wi_len; /* 0x3A */ 579 /* SNAP header */ 580 u_int16_t wi_dat[3]; /* 0x3C */ 581 u_int16_t wi_type; /* 0x42 */ 582 }; 583 584 #define WI_802_3_OFFSET 0x2E 585 #define WI_802_11_OFFSET 0x44 586 #define WI_802_11_OFFSET_RAW 0x3C 587 588 #define WI_STAT_BADCRC 0x0001 589 #define WI_STAT_UNDECRYPTABLE 0x0002 590 #define WI_STAT_ERRSTAT 0x0003 591 #define WI_STAT_MAC_PORT 0x0700 592 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ 593 #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ 594 #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ 595 #define WI_RXSTAT_MSG_TYPE 0xE000 596 597 #define BIT(x) (1 << (x)) 598 599 #define WLAN_FC_GET_TYPE(fc) (((fc) & (BIT(3) | BIT(2))) >> 2) 600 #define WLAN_FC_GET_STYPE(fc) \ 601 (((fc) & (BIT(7) | BIT(6) | BIT(5) | BIT(4))) >> 4) 602 603 #define WLAN_FC_TYPE_MGMT 0 604 #define WLAN_FC_TYPE_CTRL 1 605 #define WLAN_FC_TYPE_DATA 2 606 607 #define WI_ENC_TX_802_3 0x00 608 #define WI_ENC_TX_802_11 0x11 609 #define WI_ENC_TX_E_II 0x0E 610 611 #define WI_ENC_TX_1042 0x00 612 #define WI_ENC_TX_TUNNEL 0xF8 613 614 #define WI_TXCNTL_MACPORT 0x00FF 615 #define WI_TXCNTL_STRUCTTYPE 0xFF00 616 617 /* 618 * SNAP (sub-network access protocol) constants for transmission 619 * of IP datagrams over IEEE 802 networks, taken from RFC1042. 620 * We need these for the LLC/SNAP header fields in the TX/RX frame 621 * structure. 622 */ 623 #define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */ 624 #define WI_SNAP_K2 0x00 625 #define WI_SNAP_CONTROL 0x03 /* unnumbered information format */ 626 #define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8)) 627 #define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8)) 628 #define WI_SNAPHDR_LEN 0x6 629
Indexes created Thu Sep 25 16:09:42 GMT 2025