wireg.h revision 1.13
1 /* $NetBSD: wireg.h,v 1.13 2001/11/11 00:16:07 christos Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul (at) ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the 37 * Oslo IETF plenary meeting. 38 */ 39 40 #define WI_TIMEOUT 65536 41 42 #define WI_PORT0 0 43 #define WI_PORT1 1 44 #define WI_PORT2 2 45 #define WI_PORT3 3 46 #define WI_PORT4 4 47 #define WI_PORT5 5 48 49 /* Default port: 0 (only 0 exists on stations) */ 50 #define WI_DEFAULT_PORT (WI_PORT0 << 8) 51 52 /* Default TX rate: 2Mbps, auto fallback */ 53 #define WI_DEFAULT_TX_RATE 3 54 55 /* Default network name: ANY */ 56 /* 57 * [sommerfeld 1999/07/15] Changed from "ANY" to ""; according to Bill Fenner, 58 * ANY is used in MS driver user interfaces, while "" is used over the 59 * wire.. 60 */ 61 #define WI_DEFAULT_NETNAME "" 62 63 #define WI_DEFAULT_AP_DENSITY 1 64 65 #define WI_DEFAULT_RTS_THRESH 2347 66 67 #define WI_DEFAULT_DATALEN 2304 68 69 #define WI_DEFAULT_CREATE_IBSS 0 70 71 #define WI_DEFAULT_PM_ENABLED 0 72 73 #define WI_DEFAULT_MAX_SLEEP 100 74 75 #define WI_DEFAULT_ROAMING 1 76 77 #define WI_DEFAULT_AUTHTYPE 1 78 79 #ifdef __NetBSD__ 80 #define OS_STRING_NAME "NetBSD" 81 #endif 82 #ifdef __FreeBSD__ 83 #define OS_STRING_NAME "FreeBSD" 84 #endif 85 #ifdef __OpenBSD__ 86 #define OS_STRING_NAME "OpenBSD" 87 #endif 88 89 #define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node" 90 91 #define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS" 92 93 #define WI_DEFAULT_CHAN 3 94 95 /* 96 * register space access macros 97 */ 98 #define CSR_WRITE_4(sc, reg, val) \ 99 bus_space_write_4(sc->sc_iot, sc->sc_ioh, \ 100 (sc->sc_pci? reg * 2: reg) , val) 101 #define CSR_WRITE_2(sc, reg, val) \ 102 bus_space_write_2(sc->sc_iot, sc->sc_ioh, \ 103 (sc->sc_pci? reg * 2: reg), val) 104 #define CSR_WRITE_1(sc, reg, val) \ 105 bus_space_write_1(sc->sc_iot, sc->sc_ioh, \ 106 (sc->sc_pci? reg * 2: reg), val) 107 108 #define CSR_READ_4(sc, reg) \ 109 bus_space_read_4(sc->sc_iot, sc->sc_ioh, \ 110 (sc->sc_pci? reg * 2: reg)) 111 #define CSR_READ_2(sc, reg) \ 112 bus_space_read_2(sc->sc_iot, sc->sc_ioh, \ 113 (sc->sc_pci? reg * 2: reg)) 114 #define CSR_READ_1(sc, reg) \ 115 bus_space_read_1(sc->sc_iot, sc->sc_ioh, \ 116 (sc->sc_pci? reg * 2: reg)) 117 118 #ifndef __BUS_SPACE_HAS_STREAM_METHODS 119 #define bus_space_write_stream_2 bus_space_write_2 120 #define bus_space_write_multi_stream_2 bus_space_write_multi_2 121 #define bus_space_read_stream_2 bus_space_read_2 122 #define bus_space_read_multi_stream_2 bus_space_read_multi_2 123 #endif 124 125 #define CSR_WRITE_STREAM_2(sc, reg, val) \ 126 bus_space_write_stream_2(sc->sc_iot, sc->sc_ioh, \ 127 (sc->sc_pci? reg * 2: reg), val) 128 #define CSR_WRITE_MULTI_STREAM_2(sc, reg, val, count) \ 129 bus_space_write_multi_stream_2(sc->sc_iot, sc->sc_ioh, \ 130 (sc->sc_pci? reg * 2: reg), val, count) 131 #define CSR_READ_STREAM_2(sc, reg) \ 132 bus_space_read_stream_2(sc->sc_iot, sc->sc_ioh, \ 133 (sc->sc_pci? reg * 2: reg)) 134 #define CSR_READ_MULTI_STREAM_2(sc, reg, buf, count) \ 135 bus_space_read_multi_stream_2(sc->sc_iot, sc->sc_ioh, \ 136 (sc->sc_pci? reg * 2: reg), buf, count) 137 138 /* 139 * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent 140 * calls 'Hermes.' In typical fashion, getting documentation about this 141 * controller is about as easy as squeezing blood from a stone. Here 142 * is more or less what I know: 143 * 144 * - The Hermes controller is firmware driven, and the host interacts 145 * with the Hermes via a firmware interface, which can change. 146 * 147 * - The Hermes is described in a document called: "Hermes Firmware 148 * WaveLAN/IEEE Station Functions," document #010245, which of course 149 * Lucent will not release without an NDA. 150 * 151 * - Lucent has created a library called HCF (Hardware Control Functions) 152 * though which it wants developers to interact with the card. The HCF 153 * is needlessly complex, ill conceived and badly documented. Actually, 154 * the comments in the HCP code itself aren't bad, but the publically 155 * available manual that comes with it is awful, probably due largely to 156 * the fact that it has been emasculated in order to hide information 157 * that Lucent wants to keep proprietary. The purpose of the HCF seems 158 * to be to insulate the driver programmer from the Hermes itself so that 159 * Lucent has an excuse not to release programming in for it. 160 * 161 * - Lucent only makes available documentation and code for 'HCF Light' 162 * which is a stripped down version of HCF with certain features not 163 * implemented, most notably support for 802.11 frames. 164 * 165 * - The HCF code which I have seen blows goats. Whoever decided to 166 * use a 132 column format should be shot. 167 * 168 * Rather than actually use the Lucent HCF library, I have stripped all 169 * the useful information from it and used it to create a driver in the 170 * usual BSD form. Note: I don't want to hear anybody whining about the 171 * fact that the Lucent code is GPLed and mine isn't. I did not actually 172 * put any of Lucent's code in this driver: I only used it as a reference 173 * to obtain information about the underlying hardware. The Hermes 174 * programming interface is not GPLed, so bite me. 175 */ 176 177 /* 178 * Size of Hermes & Prism2 I/O space. 179 */ 180 #define WI_IOSIZE 0x40 181 #define WI_PCI_CBMA 0x10 /* Configuration Base Memory Address */ 182 183 /* 184 * Hermes & Prism2 register definitions 185 */ 186 187 /* Hermes command/status registers. */ 188 #define WI_COMMAND 0x00 189 #define WI_PARAM0 0x02 190 #define WI_PARAM1 0x04 191 #define WI_PARAM2 0x06 192 #define WI_STATUS 0x08 193 #define WI_RESP0 0x0A 194 #define WI_RESP1 0x0C 195 #define WI_RESP2 0x0E 196 197 /* Command register values. */ 198 #define WI_CMD_BUSY 0x8000 /* busy bit */ 199 #define WI_CMD_INI 0x0000 /* initialize */ 200 #define WI_CMD_ENABLE 0x0001 /* enable */ 201 #define WI_CMD_DISABLE 0x0002 /* disable */ 202 #define WI_CMD_DIAG 0x0003 203 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ 204 #define WI_CMD_TX 0x000B /* transmit */ 205 #define WI_CMD_NOTIFY 0x0010 206 #define WI_CMD_INQUIRE 0x0011 207 #define WI_CMD_ACCESS 0x0021 208 #define WI_CMD_PROGRAM 0x0022 209 #define WI_CMD_READMIF 0x0030 /* prism2 only? */ 210 #define WI_CMD_WRITEMIF 0x0031 /* prism2 only? */ 211 #define WI_CMD_TEST 0x0038 /* prism2 only? */ 212 213 #define WI_CMD_CODE_MASK 0x003F 214 215 /* 216 * prism2 test mode commands 217 */ 218 #define WI_TEST_MONITOR 0x000b 219 #define WI_TEST_STOP 0x000f 220 221 /* 222 * Reclaim qualifier bit, applicable to the 223 * TX and INQUIRE commands. 224 */ 225 #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ 226 227 /* 228 * ACCESS command qualifier bits. 229 */ 230 #define WI_ACCESS_READ 0x0000 231 #define WI_ACCESS_WRITE 0x0100 232 233 /* 234 * PROGRAM command qualifier bits. 235 */ 236 #define WI_PROGRAM_DISABLE 0x0000 237 #define WI_PROGRAM_ENABLE_RAM 0x0100 238 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 239 #define WI_PROGRAM_NVRAM 0x0300 240 241 /* Status register values */ 242 #define WI_STAT_CMD_CODE 0x003F 243 #define WI_STAT_DIAG_ERR 0x0100 244 #define WI_STAT_INQ_ERR 0x0500 245 #define WI_STAT_CMD_RESULT 0x7F00 246 247 /* memory handle management registers */ 248 #define WI_INFO_FID 0x10 249 #define WI_RX_FID 0x20 250 #define WI_ALLOC_FID 0x22 251 #define WI_TX_CMP_FID 0x24 252 253 /* 254 * Buffer Access Path (BAP) registers. 255 * These are I/O channels. I believe you can use each one for 256 * any desired purpose independently of the other. In general 257 * though, we use BAP1 for reading and writing LTV records and 258 * reading received data frames, and BAP0 for writing transmit 259 * frames. This is a convention though, not a rule. 260 */ 261 #define WI_SEL0 0x18 262 #define WI_SEL1 0x1A 263 #define WI_OFF0 0x1C 264 #define WI_OFF1 0x1E 265 #define WI_DATA0 0x36 266 #define WI_DATA1 0x38 267 #define WI_BAP0 WI_DATA0 268 #define WI_BAP1 WI_DATA1 269 270 #define WI_OFF_BUSY 0x8000 271 #define WI_OFF_ERR 0x4000 272 #define WI_OFF_DATAOFF 0x0FFF 273 274 /* Event registers */ 275 #define WI_EVENT_STAT 0x30 /* Event status */ 276 #define WI_INT_EN 0x32 /* Interrupt enable/disable */ 277 #define WI_EVENT_ACK 0x34 /* Ack event */ 278 279 /* Events */ 280 #define WI_EV_TICK 0x8000 /* aux timer tick */ 281 #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ 282 #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ 283 #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ 284 #define WI_EV_AWAKE 0x0100 285 #define WI_EV_INFO 0x0080 /* async info frame */ 286 #define WI_EV_CMD 0x0010 /* command completed */ 287 #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ 288 #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ 289 #define WI_EV_TX 0x0002 /* async xmit completed succesfully */ 290 #define WI_EV_RX 0x0001 /* async rx completed */ 291 292 #define WI_INTRS \ 293 (WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP) 294 295 /* Host software registers */ 296 #define WI_SW0 0x28 297 #define WI_SW1 0x2A 298 #define WI_SW2 0x2C 299 #define WI_SW3 0x2E /* does not appear in Prism2 */ 300 301 #define WI_CNTL 0x14 302 303 #define WI_CNTL_AUX_ENA 0xC000 304 #define WI_CNTL_AUX_ENA_STAT 0xC000 305 #define WI_CNTL_AUX_DIS_STAT 0x0000 306 #define WI_CNTL_AUX_ENA_CNTL 0x8000 307 #define WI_CNTL_AUX_DIS_CNTL 0x4000 308 309 #define WI_AUX_PAGE 0x3A 310 #define WI_AUX_OFFSET 0x3C 311 #define WI_AUX_DATA 0x3E 312 313 /* 314 * PCI Host Interface Registers (HFA3842 Specific) 315 * The value of all Register's Offset, such as WI_INFO_FID and WI_PARAM0, 316 * has doubled. 317 * About WI_PCI_COR: In this Register, only soft-reset bit implement; Bit(7). 318 */ 319 #define WI_PCI_COR 0x4C 320 #define WI_PCI_HCR 0x5C 321 #define WI_PCI_MASTER0_ADDRH 0x80 322 #define WI_PCI_MASTER0_ADDRL 0x84 323 #define WI_PCI_MASTER0_LEN 0x88 324 #define WI_PCI_MASTER0_CON 0x8C 325 326 #define WI_PCI_STATUS 0x98 327 328 #define WI_PCI_MASTER1_ADDRH 0xA0 329 #define WI_PCI_MASTER1_ADDRL 0xA4 330 #define WI_PCI_MASTER1_LEN 0xA8 331 #define WI_PCI_MASTER1_CON 0xAC 332 333 #define WI_PCI_SOFT_RESET (1 << 7) 334 335 /* 336 * One form of communication with the Hermes is with what Lucent calls 337 * LTV records, where LTV stands for Length, Type and Value. The length 338 * and type are 16 bits and are in native byte order. The value is in 339 * multiples of 16 bits and is in little endian byte order. 340 */ 341 struct wi_ltv_gen { 342 u_int16_t wi_len; 343 u_int16_t wi_type; 344 u_int16_t wi_val; 345 }; 346 347 struct wi_ltv_str { 348 u_int16_t wi_len; 349 u_int16_t wi_type; 350 u_int16_t wi_str[17]; 351 }; 352 353 #define WI_SETVAL(recno, val) \ 354 do { \ 355 struct wi_ltv_gen g; \ 356 \ 357 g.wi_len = 2; \ 358 g.wi_type = recno; \ 359 g.wi_val = htole16(val); \ 360 wi_write_record(sc, &g); \ 361 } while (0) 362 363 #define WI_SETSTR(recno, str) \ 364 do { \ 365 struct wi_ltv_str s; \ 366 int l; \ 367 \ 368 l = (strlen(str) + 1) & ~0x1; \ 369 memset((char *)&s, 0, sizeof(s)); \ 370 s.wi_len = (l / 2) + 2; \ 371 s.wi_type = recno; \ 372 s.wi_str[0] = htole16(strlen(str)); \ 373 memcpy((char *)&s.wi_str[1], str, strlen(str)); \ 374 wi_write_record(sc, (struct wi_ltv_gen *)&s); \ 375 } while (0) 376 377 /* 378 * Download buffer location and length (0xFD01). 379 */ 380 struct wi_ltv_dnld_buf { 381 u_int16_t wi_len; 382 u_int16_t wi_type; 383 u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ 384 u_int16_t wi_buf_off; /* offset of idb */ 385 u_int16_t wi_buf_len; /* len of idb */ 386 }; 387 388 /* 389 * Mem sizes (0xFD02). 390 */ 391 struct wi_ltv_memsz { 392 u_int16_t wi_len; 393 u_int16_t wi_type; 394 u_int16_t wi_mem_ram; 395 u_int16_t wi_mem_nvram; 396 }; 397 398 /* 399 * NIC Identification (0xFD0B, 0xFD20) 400 */ 401 struct wi_ltv_ver { 402 u_int16_t wi_len; 403 u_int16_t wi_type; 404 u_int16_t wi_ver[4]; 405 #define WI_NIC_EVB2 0x8000 406 #define WI_NIC_HWB3763 0x8001 407 #define WI_NIC_HWB3163 0x8002 408 #define WI_NIC_HWB3163B 0x8003 409 #define WI_NIC_EVB3 0x8004 410 #define WI_NIC_HWB1153 0x8007 411 #define WI_NIC_P2_SST 0x8008 /* Prism2 with SST flush */ 412 #define WI_NIC_PRISM2_5 0x800C 413 #define WI_NIC_3874A 0x8013 /* Prism2.5 Mini-PCI */ 414 }; 415 416 /* 417 * List of intended regulatory domains (0xFD11). 418 */ 419 struct wi_ltv_domains { 420 u_int16_t wi_len; 421 u_int16_t wi_type; 422 u_int16_t wi_domains[6]; 423 }; 424 425 /* 426 * CIS struct (0xFD13). 427 */ 428 struct wi_ltv_cis { 429 u_int16_t wi_len; 430 u_int16_t wi_type; 431 u_int16_t wi_cis[240]; 432 }; 433 434 /* 435 * Communications quality (0xFD43). 436 */ 437 struct wi_ltv_commqual { 438 u_int16_t wi_len; 439 u_int16_t wi_type; 440 u_int16_t wi_coms_qual; 441 u_int16_t wi_sig_lvl; 442 u_int16_t wi_noise_lvl; 443 }; 444 445 /* 446 * Actual system scale thresholds (0xFC06, 0xFD46). 447 */ 448 struct wi_ltv_scalethresh { 449 u_int16_t wi_len; 450 u_int16_t wi_type; 451 u_int16_t wi_energy_detect; 452 u_int16_t wi_carrier_detect; 453 u_int16_t wi_defer; 454 u_int16_t wi_cell_search; 455 u_int16_t wi_out_of_range; 456 u_int16_t wi_delta_snr; 457 }; 458 459 /* 460 * PCF info struct (0xFD87). 461 */ 462 struct wi_ltv_pcf { 463 u_int16_t wi_len; 464 u_int16_t wi_type; 465 u_int16_t wi_medium_occupancy_limit; 466 u_int16_t wi_cfp_period; 467 u_int16_t wi_cfp_max_duration; 468 }; 469 470 /* 471 * Connection control characteristics. (0xFC00) 472 * 1 == Basic Service Set (BSS) 473 * 2 == Wireless Distribudion System (WDS) 474 * 3 == Pseudo IBSS 475 */ 476 #define WI_PORTTYPE_BSS 0x1 477 #define WI_PORTTYPE_WDS 0x2 478 #define WI_PORTTYPE_ADHOC 0x3 479 480 /* 481 * Mac addresses. (0xFC01, 0xFC08) 482 */ 483 struct wi_ltv_macaddr { 484 u_int16_t wi_len; 485 u_int16_t wi_type; 486 u_int8_t wi_mac_addr[6]; 487 }; 488 489 /* 490 * Station set identification (SSID). (0xFC02, 0xFC04) 491 */ 492 struct wi_ltv_ssid { 493 u_int16_t wi_len; 494 u_int16_t wi_type; 495 u_int16_t wi_id[17]; 496 }; 497 498 /* 499 * Set our station name. (0xFC0E) 500 */ 501 struct wi_ltv_nodename { 502 u_int16_t wi_len; 503 u_int16_t wi_type; 504 u_int16_t wi_nodename[17]; 505 }; 506 507 /* 508 * Multicast addresses to be put in filter. We're 509 * allowed up to 16 addresses in the filter. (0xFC80) 510 */ 511 struct wi_ltv_mcast { 512 u_int16_t wi_len; 513 u_int16_t wi_type; 514 struct ether_addr wi_mcast[16]; 515 }; 516 517 /* 518 * Information frame types. 519 */ 520 #define WI_INFO_NOTIFY 0xF000 /* Handover address */ 521 #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ 522 #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ 523 #define WI_INFO_LINK_STAT 0xF200 /* Link status */ 524 #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ 525 526 /* 527 * Hermes transmit/receive frame structure 528 */ 529 struct wi_frame { 530 u_int16_t wi_status; /* 0x00 */ 531 u_int16_t wi_rsvd0; /* 0x02 */ 532 u_int16_t wi_rsvd1; /* 0x04 */ 533 u_int16_t wi_q_info; /* 0x06 */ 534 u_int16_t wi_rsvd2; /* 0x08 */ 535 u_int16_t wi_rsvd3; /* 0x0A */ 536 u_int16_t wi_tx_ctl; /* 0x0C */ 537 /* 802.11 */ 538 u_int16_t wi_frame_ctl; /* 0x0E */ 539 u_int16_t wi_id; /* 0x10 */ 540 u_int8_t wi_addr1[6]; /* 0x12 */ 541 u_int8_t wi_addr2[6]; /* 0x18 */ 542 u_int8_t wi_addr3[6]; /* 0x1E */ 543 u_int16_t wi_seq_ctl; /* 0x24 */ 544 u_int8_t wi_addr4[6]; /* 0x26 */ 545 u_int16_t wi_dat_len; /* 0x2C */ 546 /* 802.3 */ 547 u_int8_t wi_dst_addr[6]; /* 0x2E */ 548 u_int8_t wi_src_addr[6]; /* 0x34 */ 549 u_int16_t wi_len; /* 0x3A */ 550 /* SNAP header */ 551 u_int16_t wi_dat[3]; /* 0x3C */ 552 u_int16_t wi_type; /* 0x42 */ 553 }; 554 555 #define WI_802_3_OFFSET 0x2E 556 #define WI_802_11_OFFSET 0x44 557 #define WI_802_11_OFFSET_RAW 0x3C 558 559 #define WI_STAT_BADCRC 0x0001 560 #define WI_STAT_UNDECRYPTABLE 0x0002 561 #define WI_STAT_ERRSTAT 0x0003 562 #define WI_STAT_MAC_PORT 0x0700 563 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ 564 #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ 565 #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ 566 #define WI_RXSTAT_MSG_TYPE 0xE000 567 568 #define BIT(x) (1 << (x)) 569 570 #define WLAN_FC_GET_TYPE(fc) (((fc) & (BIT(3) | BIT(2))) >> 2) 571 #define WLAN_FC_GET_STYPE(fc) \ 572 (((fc) & (BIT(7) | BIT(6) | BIT(5) | BIT(4))) >> 4) 573 574 #define WLAN_FC_TYPE_MGMT 0 575 #define WLAN_FC_TYPE_CTRL 1 576 #define WLAN_FC_TYPE_DATA 2 577 578 #define WI_ENC_TX_802_3 0x00 579 #define WI_ENC_TX_802_11 0x11 580 #define WI_ENC_TX_E_II 0x0E 581 582 #define WI_ENC_TX_1042 0x00 583 #define WI_ENC_TX_TUNNEL 0xF8 584 585 #define WI_TXCNTL_MACPORT 0x00FF 586 #define WI_TXCNTL_STRUCTTYPE 0xFF00 587 588 /* 589 * SNAP (sub-network access protocol) constants for transmission 590 * of IP datagrams over IEEE 802 networks, taken from RFC1042. 591 * We need these for the LLC/SNAP header fields in the TX/RX frame 592 * structure. 593 */ 594 #define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */ 595 #define WI_SNAP_K2 0x00 596 #define WI_SNAP_CONTROL 0x03 /* unnumbered information format */ 597 #define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8)) 598 #define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8)) 599 #define WI_SNAPHDR_LEN 0x6 600
Indexes created Fri Sep 26 08:10:20 GMT 2025