wireg.h revision 1.32
1 /* $NetBSD: wireg.h,v 1.32 2002/04/15 15:05:58 onoe Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul (at) ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the 37 * Oslo IETF plenary meeting. 38 */ 39 40 #define WI_TIMEOUT 65536 41 42 #define WI_PORT0 0 43 #define WI_PORT1 1 44 #define WI_PORT2 2 45 #define WI_PORT3 3 46 #define WI_PORT4 4 47 #define WI_PORT5 5 48 49 /* Default port: 0 (only 0 exists on stations) */ 50 #define WI_DEFAULT_PORT (WI_PORT0 << 8) 51 52 /* Default TX rate: 2Mbps, auto fallback */ 53 #define WI_DEFAULT_TX_RATE 3 54 55 /* Default network name: ANY */ 56 /* 57 * [sommerfeld 1999/07/15] Changed from "ANY" to ""; according to Bill Fenner, 58 * ANY is used in MS driver user interfaces, while "" is used over the 59 * wire.. 60 */ 61 #define WI_DEFAULT_NETNAME "" 62 63 #define WI_DEFAULT_AP_DENSITY 1 64 65 #define WI_DEFAULT_RTS_THRESH 2347 66 67 #define WI_DEFAULT_DATALEN 2304 68 69 #define WI_DEFAULT_CREATE_IBSS 0 70 71 #define WI_DEFAULT_PM_ENABLED 0 72 73 #define WI_DEFAULT_MAX_SLEEP 100 74 75 #define WI_DEFAULT_ROAMING 1 76 77 #define WI_DEFAULT_AUTHTYPE 1 78 79 #ifdef __NetBSD__ 80 #define OS_STRING_NAME "NetBSD" 81 #endif 82 #ifdef __FreeBSD__ 83 #define OS_STRING_NAME "FreeBSD" 84 #endif 85 #ifdef __OpenBSD__ 86 #define OS_STRING_NAME "OpenBSD" 87 #endif 88 89 #define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node" 90 91 #define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS" 92 93 #define WI_DEFAULT_CHAN 3 94 95 /* 96 * register space access macros 97 */ 98 #ifdef WI_AT_BIGENDIAN_BUS_HACK 99 /* 100 * XXX - ugly hack for sparc bus_space_* macro deficiencies: 101 * assume the bus we are accessing is big endian. 102 */ 103 104 #define CSR_WRITE_4(sc, reg, val) \ 105 bus_space_write_4(sc->sc_iot, sc->sc_ioh, \ 106 (sc->sc_pci? reg * 2: reg) , htole32(val)) 107 #define CSR_WRITE_2(sc, reg, val) \ 108 bus_space_write_2(sc->sc_iot, sc->sc_ioh, \ 109 (sc->sc_pci? reg * 2: reg), htole16(val)) 110 #define CSR_WRITE_1(sc, reg, val) \ 111 bus_space_write_1(sc->sc_iot, sc->sc_ioh, \ 112 (sc->sc_pci? reg * 2: reg), val) 113 114 #define CSR_READ_4(sc, reg) \ 115 le32toh(bus_space_read_4(sc->sc_iot, sc->sc_ioh, \ 116 (sc->sc_pci? reg * 2: reg))) 117 #define CSR_READ_2(sc, reg) \ 118 le16toh(bus_space_read_2(sc->sc_iot, sc->sc_ioh, \ 119 (sc->sc_pci? reg * 2: reg))) 120 #define CSR_READ_1(sc, reg) \ 121 bus_space_read_1(sc->sc_iot, sc->sc_ioh, \ 122 (sc->sc_pci? reg * 2: reg)) 123 124 #else 125 126 #define CSR_WRITE_4(sc, reg, val) \ 127 bus_space_write_4(sc->sc_iot, sc->sc_ioh, \ 128 (sc->sc_pci? reg * 2: reg) , val) 129 #define CSR_WRITE_2(sc, reg, val) \ 130 bus_space_write_2(sc->sc_iot, sc->sc_ioh, \ 131 (sc->sc_pci? reg * 2: reg), val) 132 #define CSR_WRITE_1(sc, reg, val) \ 133 bus_space_write_1(sc->sc_iot, sc->sc_ioh, \ 134 (sc->sc_pci? reg * 2: reg), val) 135 136 #define CSR_READ_4(sc, reg) \ 137 bus_space_read_4(sc->sc_iot, sc->sc_ioh, \ 138 (sc->sc_pci? reg * 2: reg)) 139 #define CSR_READ_2(sc, reg) \ 140 bus_space_read_2(sc->sc_iot, sc->sc_ioh, \ 141 (sc->sc_pci? reg * 2: reg)) 142 #define CSR_READ_1(sc, reg) \ 143 bus_space_read_1(sc->sc_iot, sc->sc_ioh, \ 144 (sc->sc_pci? reg * 2: reg)) 145 #endif 146 147 #ifndef __BUS_SPACE_HAS_STREAM_METHODS 148 #define bus_space_write_stream_2 bus_space_write_2 149 #define bus_space_write_multi_stream_2 bus_space_write_multi_2 150 #define bus_space_read_stream_2 bus_space_read_2 151 #define bus_space_read_multi_stream_2 bus_space_read_multi_2 152 #endif 153 154 #define CSR_WRITE_STREAM_2(sc, reg, val) \ 155 bus_space_write_stream_2(sc->sc_iot, sc->sc_ioh, \ 156 (sc->sc_pci? reg * 2: reg), val) 157 #define CSR_WRITE_MULTI_STREAM_2(sc, reg, val, count) \ 158 bus_space_write_multi_stream_2(sc->sc_iot, sc->sc_ioh, \ 159 (sc->sc_pci? reg * 2: reg), val, count) 160 #define CSR_READ_STREAM_2(sc, reg) \ 161 bus_space_read_stream_2(sc->sc_iot, sc->sc_ioh, \ 162 (sc->sc_pci? reg * 2: reg)) 163 #define CSR_READ_MULTI_STREAM_2(sc, reg, buf, count) \ 164 bus_space_read_multi_stream_2(sc->sc_iot, sc->sc_ioh, \ 165 (sc->sc_pci? reg * 2: reg), buf, count) 166 167 /* 168 * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent 169 * calls 'Hermes.' In typical fashion, getting documentation about this 170 * controller is about as easy as squeezing blood from a stone. Here 171 * is more or less what I know: 172 * 173 * - The Hermes controller is firmware driven, and the host interacts 174 * with the Hermes via a firmware interface, which can change. 175 * 176 * - The Hermes is described in a document called: "Hermes Firmware 177 * WaveLAN/IEEE Station Functions," document #010245, which of course 178 * Lucent will not release without an NDA. 179 * 180 * - Lucent has created a library called HCF (Hardware Control Functions) 181 * though which it wants developers to interact with the card. The HCF 182 * is needlessly complex, ill conceived and badly documented. Actually, 183 * the comments in the HCP code itself aren't bad, but the publically 184 * available manual that comes with it is awful, probably due largely to 185 * the fact that it has been emasculated in order to hide information 186 * that Lucent wants to keep proprietary. The purpose of the HCF seems 187 * to be to insulate the driver programmer from the Hermes itself so that 188 * Lucent has an excuse not to release programming in for it. 189 * 190 * - Lucent only makes available documentation and code for 'HCF Light' 191 * which is a stripped down version of HCF with certain features not 192 * implemented, most notably support for 802.11 frames. 193 * 194 * - The HCF code which I have seen blows goats. Whoever decided to 195 * use a 132 column format should be shot. 196 * 197 * Rather than actually use the Lucent HCF library, I have stripped all 198 * the useful information from it and used it to create a driver in the 199 * usual BSD form. Note: I don't want to hear anybody whining about the 200 * fact that the Lucent code is GPLed and mine isn't. I did not actually 201 * put any of Lucent's code in this driver: I only used it as a reference 202 * to obtain information about the underlying hardware. The Hermes 203 * programming interface is not GPLed, so bite me. 204 */ 205 206 /* 207 * Size of Hermes & Prism2 I/O space. 208 */ 209 #define WI_IOSIZE 0x40 210 #define WI_PCI_CBMA 0x10 /* Configuration Base Memory Address */ 211 212 /* 213 * Hermes & Prism2 register definitions 214 */ 215 216 /* Hermes command/status registers. */ 217 #define WI_COMMAND 0x00 218 #define WI_PARAM0 0x02 219 #define WI_PARAM1 0x04 220 #define WI_PARAM2 0x06 221 #define WI_STATUS 0x08 222 #define WI_RESP0 0x0A 223 #define WI_RESP1 0x0C 224 #define WI_RESP2 0x0E 225 226 /* Command register values. */ 227 #define WI_CMD_BUSY 0x8000 /* busy bit */ 228 #define WI_CMD_INI 0x0000 /* initialize */ 229 #define WI_CMD_ENABLE 0x0001 /* enable */ 230 #define WI_CMD_DISABLE 0x0002 /* disable */ 231 #define WI_CMD_DIAG 0x0003 232 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ 233 #define WI_CMD_TX 0x000B /* transmit */ 234 #define WI_CMD_NOTIFY 0x0010 235 #define WI_CMD_INQUIRE 0x0011 236 #define WI_CMD_ACCESS 0x0021 237 #define WI_CMD_PROGRAM 0x0022 238 #define WI_CMD_READEE 0x0030 239 240 #define WI_CMD_CODE_MASK 0x003F 241 242 /* 243 * Reclaim qualifier bit, applicable to the 244 * TX and INQUIRE commands. 245 */ 246 #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ 247 248 /* 249 * ACCESS command qualifier bits. 250 */ 251 #define WI_ACCESS_READ 0x0000 252 #define WI_ACCESS_WRITE 0x0100 253 254 /* 255 * PROGRAM command qualifier bits. 256 */ 257 #define WI_PROGRAM_DISABLE 0x0000 258 #define WI_PROGRAM_ENABLE_RAM 0x0100 259 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 260 #define WI_PROGRAM_NVRAM 0x0300 261 262 /* Status register values */ 263 #define WI_STAT_CMD_CODE 0x003F 264 #define WI_STAT_DIAG_ERR 0x0100 265 #define WI_STAT_INQ_ERR 0x0500 266 #define WI_STAT_CMD_RESULT 0x7F00 267 268 /* memory handle management registers */ 269 #define WI_INFO_FID 0x10 270 #define WI_RX_FID 0x20 271 #define WI_ALLOC_FID 0x22 272 #define WI_TX_CMP_FID 0x24 273 274 /* 275 * Buffer Access Path (BAP) registers. 276 * These are I/O channels. I believe you can use each one for 277 * any desired purpose independently of the other. In general 278 * though, we use BAP1 for reading and writing LTV records and 279 * reading received data frames, and BAP0 for writing transmit 280 * frames. This is a convention though, not a rule. 281 */ 282 #define WI_SEL0 0x18 283 #define WI_SEL1 0x1A 284 #define WI_OFF0 0x1C 285 #define WI_OFF1 0x1E 286 #define WI_DATA0 0x36 287 #define WI_DATA1 0x38 288 #define WI_BAP0 WI_DATA0 289 #define WI_BAP1 WI_DATA1 290 291 #define WI_OFF_BUSY 0x8000 292 #define WI_OFF_ERR 0x4000 293 #define WI_OFF_DATAOFF 0x0FFF 294 295 /* Event registers */ 296 #define WI_EVENT_STAT 0x30 /* Event status */ 297 #define WI_INT_EN 0x32 /* Interrupt enable/disable */ 298 #define WI_EVENT_ACK 0x34 /* Ack event */ 299 300 /* Events */ 301 #define WI_EV_TICK 0x8000 /* aux timer tick */ 302 #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ 303 #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ 304 #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ 305 #define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */ 306 #define WI_EV_INFO 0x0080 /* async info frame */ 307 #define WI_EV_CMD 0x0010 /* command completed */ 308 #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ 309 #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ 310 #define WI_EV_TX 0x0002 /* async xmit completed succesfully */ 311 #define WI_EV_RX 0x0001 /* async rx completed */ 312 313 #define WI_INTRS \ 314 (WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP) 315 316 /* Host software registers */ 317 #define WI_SW0 0x28 318 #define WI_SW1 0x2A 319 #define WI_SW2 0x2C 320 #define WI_SW3 0x2E /* does not appear in Prism2 */ 321 322 #define WI_CNTL 0x14 323 324 #define WI_CNTL_AUX_ENA 0xC000 325 #define WI_CNTL_AUX_ENA_STAT 0xC000 326 #define WI_CNTL_AUX_DIS_STAT 0x0000 327 #define WI_CNTL_AUX_ENA_CNTL 0x8000 328 #define WI_CNTL_AUX_DIS_CNTL 0x4000 329 330 #define WI_AUX_PAGE 0x3A 331 #define WI_AUX_OFFSET 0x3C 332 #define WI_AUX_DATA 0x3E 333 334 #define WI_AUX_PGSZ 128 335 #define WI_AUX_KEY0 0xfe01 336 #define WI_AUX_KEY1 0xdc23 337 #define WI_AUX_KEY2 0xba45 338 339 #define WI_COR 0x40 /* only for Symbol */ 340 #define WI_COR_RESET 0x0080 341 #define WI_COR_IOMODE 0x0041 342 343 #define WI_HCR 0x42 /* only for Symbol */ 344 #define WI_HCR_4WIRE 0x0010 345 #define WI_HCR_RUN 0x0007 346 #define WI_HCR_HOLD 0x000f 347 #define WI_HCR_EEHOLD 0x00ce 348 349 /* 350 * PCI Host Interface Registers (HFA3842 Specific) 351 * The value of all Register's Offset, such as WI_INFO_FID and WI_PARAM0, 352 * has doubled. 353 * About WI_PCI_COR: In this Register, only soft-reset bit implement; Bit(7). 354 */ 355 #define WI_PCI_COR 0x4C 356 #define WI_PCI_HCR 0x5C 357 #define WI_PCI_MASTER0_ADDRH 0x80 358 #define WI_PCI_MASTER0_ADDRL 0x84 359 #define WI_PCI_MASTER0_LEN 0x88 360 #define WI_PCI_MASTER0_CON 0x8C 361 362 #define WI_PCI_STATUS 0x98 363 364 #define WI_PCI_MASTER1_ADDRH 0xA0 365 #define WI_PCI_MASTER1_ADDRL 0xA4 366 #define WI_PCI_MASTER1_LEN 0xA8 367 #define WI_PCI_MASTER1_CON 0xAC 368 369 #define WI_PCI_SOFT_RESET (1 << 7) 370 371 /* 372 * One form of communication with the Hermes is with what Lucent calls 373 * LTV records, where LTV stands for Length, Type and Value. The length 374 * and type are 16 bits and are in native byte order. The value is in 375 * multiples of 16 bits and is in little endian byte order. 376 */ 377 struct wi_ltv_gen { 378 u_int16_t wi_len; 379 u_int16_t wi_type; 380 u_int16_t wi_val; 381 }; 382 383 struct wi_ltv_str { 384 u_int16_t wi_len; 385 u_int16_t wi_type; 386 u_int16_t wi_str[17]; 387 }; 388 389 #define WI_SETVAL(recno, val) \ 390 do { \ 391 struct wi_ltv_gen g; \ 392 \ 393 g.wi_len = 2; \ 394 g.wi_type = recno; \ 395 g.wi_val = htole16(val); \ 396 wi_write_record(sc, &g); \ 397 } while (0) 398 399 #define WI_SETSTR(recno, str) \ 400 do { \ 401 struct wi_ltv_str s; \ 402 int l; \ 403 \ 404 l = (strlen(str) + 1) & ~0x1; \ 405 memset((char *)&s, 0, sizeof(s)); \ 406 s.wi_len = (l / 2) + 2; \ 407 s.wi_type = recno; \ 408 s.wi_str[0] = htole16(strlen(str)); \ 409 memcpy((char *)&s.wi_str[1], str, strlen(str)); \ 410 wi_write_record(sc, (struct wi_ltv_gen *)&s); \ 411 } while (0) 412 413 /* 414 * Download buffer location and length (0xFD01). 415 */ 416 struct wi_ltv_dnld_buf { 417 u_int16_t wi_len; 418 u_int16_t wi_type; 419 u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ 420 u_int16_t wi_buf_off; /* offset of idb */ 421 u_int16_t wi_buf_len; /* len of idb */ 422 }; 423 424 /* 425 * Mem sizes (0xFD02). 426 */ 427 struct wi_ltv_memsz { 428 u_int16_t wi_len; 429 u_int16_t wi_type; 430 u_int16_t wi_mem_ram; 431 u_int16_t wi_mem_nvram; 432 }; 433 434 /* 435 * NIC Identification (0xFD0B, 0xFD20) 436 */ 437 struct wi_ltv_ver { 438 u_int16_t wi_len; 439 u_int16_t wi_type; 440 u_int16_t wi_ver[4]; 441 }; 442 443 /* define card ident */ 444 /* Lucent */ 445 #define WI_NIC_LUCENT_ID 0x0001 446 #define WI_NIC_LUCENT_STR "Lucent Technologies, WaveLAN/IEEE" 447 448 #define WI_NIC_SONY_ID 0x0002 449 #define WI_NIC_SONY_STR "Sony WaveLAN/IEEE" 450 451 #define WI_NIC_LUCENT_EMB_ID 0x0005 452 #define WI_NIC_LUCENT_EMB_STR "Lucent Embedded WaveLAN/IEEE" 453 454 /* Intersil */ 455 #define WI_NIC_EVB2_ID 0x8000 456 #define WI_NIC_EVB2_STR "RF:PRISM2 MAC:HFA3841" 457 458 #define WI_NIC_HWB3763_ID 0x8001 459 #define WI_NIC_HWB3763_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3763 rev.B" 460 461 #define WI_NIC_HWB3163_ID 0x8002 462 #define WI_NIC_HWB3163_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A" 463 464 #define WI_NIC_HWB3163B_ID 0x8003 465 #define WI_NIC_HWB3163B_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.B" 466 467 #define WI_NIC_EVB3_ID 0x8004 468 #define WI_NIC_EVB3_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL" 469 470 #define WI_NIC_HWB1153_ID 0x8007 471 #define WI_NIC_HWB1153_STR "RF:PRISM1 MAC:HFA3841 CARD:HWB1153" 472 473 #define WI_NIC_P2_SST_ID 0x8008 /* Prism2 with SST flush */ 474 #define WI_NIC_P2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash" 475 476 #define WI_NIC_EVB2_SST_ID 0x8009 477 #define WI_NIC_EVB2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash" 478 479 #define WI_NIC_3842_EVA_ID 0x800A /* Prism2 3842 Evaluation Board */ 480 #define WI_NIC_3842_EVA_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL" 481 482 #define WI_NIC_3842_PCMCIA_AMD_ID 0x800B /* Prism2.5 PCMCIA */ 483 #define WI_NIC_3842_PCMCIA_SST_ID 0x800C 484 #define WI_NIC_3842_PCMCIA_ATM_ID 0x800D 485 #define WI_NIC_3842_PCMCIA_STR "RF:PRISM2.5 MAC:ISL3873B(PCMCIA)" 486 487 #define WI_NIC_3842_MINI_AMD_ID 0x8012 /* Prism2.5 Mini-PCI */ 488 #define WI_NIC_3842_MINI_SST_ID 0x8013 489 #define WI_NIC_3842_MINI_ATM_ID 0x8014 490 #define WI_NIC_3842_MINI_STR "RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)" 491 492 #define WI_NIC_3842_PCI_AMD_ID 0x8016 /* Prism2.5 PCI-bridge */ 493 #define WI_NIC_3842_PCI_SST_ID 0x8017 494 #define WI_NIC_3842_PCI_ATM_ID 0x8018 495 #define WI_NIC_3842_PCI_STR "RF:PRISM2.5 MAC:ISL3874A(PCI-bridge)" 496 497 #define WI_NIC_P3_PCMCIA_AMD_ID 0x801A /* Prism3 PCMCIA */ 498 #define WI_NIC_P3_PCMCIA_SST_ID 0x801B 499 #define WI_NIC_P3_PCMCIA_STR "RF:PRISM3 MAC:ISL3871(PCMCIA)" 500 501 #define WI_NIC_P3_MINI_AMD_ID 0x8021 /* Prism3 Mini-PCI */ 502 #define WI_NIC_P3_MINI_SST_ID 0x8022 503 #define WI_NIC_P3_MINI_STR "RF:PRISM3 MAC:ISL3871(Mini-PCI)" 504 505 /* 506 * List of intended regulatory domains (0xFD11). 507 */ 508 struct wi_ltv_domains { 509 u_int16_t wi_len; 510 u_int16_t wi_type; 511 u_int16_t wi_domains[6]; 512 }; 513 514 /* 515 * CIS struct (0xFD13). 516 */ 517 struct wi_ltv_cis { 518 u_int16_t wi_len; 519 u_int16_t wi_type; 520 u_int16_t wi_cis[240]; 521 }; 522 523 /* 524 * Communications quality (0xFD43). 525 */ 526 struct wi_ltv_commqual { 527 u_int16_t wi_len; 528 u_int16_t wi_type; 529 u_int16_t wi_coms_qual; 530 u_int16_t wi_sig_lvl; 531 u_int16_t wi_noise_lvl; 532 }; 533 534 /* 535 * Actual system scale thresholds (0xFC06, 0xFD46). 536 */ 537 struct wi_ltv_scalethresh { 538 u_int16_t wi_len; 539 u_int16_t wi_type; 540 u_int16_t wi_energy_detect; 541 u_int16_t wi_carrier_detect; 542 u_int16_t wi_defer; 543 u_int16_t wi_cell_search; 544 u_int16_t wi_out_of_range; 545 u_int16_t wi_delta_snr; 546 }; 547 548 /* 549 * PCF info struct (0xFD87). 550 */ 551 struct wi_ltv_pcf { 552 u_int16_t wi_len; 553 u_int16_t wi_type; 554 u_int16_t wi_medium_occupancy_limit; 555 u_int16_t wi_cfp_period; 556 u_int16_t wi_cfp_max_duration; 557 }; 558 559 /* 560 * Connection control characteristics. (0xFC00) 561 * 0 == IBSS (802.11 compliant mode) (Only PRISM2) 562 * 1 == Basic Service Set (BSS) 563 * 2 == Wireless Distribudion System (WDS) 564 * 3 == Pseudo IBSS 565 * (Only PRISM2; not 802.11 compliant mode, testing use only) 566 * 6 == HOST AP (Only PRISM2) 567 */ 568 #define WI_PORTTYPE_BSS 0x1 569 #define WI_PORTTYPE_WDS 0x2 570 #define WI_PORTTYPE_ADHOC 0x3 571 572 /* 573 * Mac addresses. (0xFC01, 0xFC08) 574 */ 575 struct wi_ltv_macaddr { 576 u_int16_t wi_len; 577 u_int16_t wi_type; 578 u_int8_t wi_mac_addr[6]; 579 }; 580 581 /* 582 * Station set identification (SSID). (0xFC02, 0xFC04) 583 */ 584 struct wi_ltv_ssid { 585 u_int16_t wi_len; 586 u_int16_t wi_type; 587 u_int16_t wi_id[17]; 588 }; 589 590 /* 591 * Set our station name. (0xFC0E) 592 */ 593 struct wi_ltv_nodename { 594 u_int16_t wi_len; 595 u_int16_t wi_type; 596 u_int16_t wi_nodename[17]; 597 }; 598 599 /* 600 * Multicast addresses to be put in filter. We're 601 * allowed up to 16 addresses in the filter. (0xFC80) 602 */ 603 struct wi_ltv_mcast { 604 u_int16_t wi_len; 605 u_int16_t wi_type; 606 struct ether_addr wi_mcast[16]; 607 }; 608 609 /* 610 * Information frame types. 611 */ 612 #define WI_INFO_NOTIFY 0xF000 /* Handover address */ 613 #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ 614 #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ 615 #define WI_INFO_LINK_STAT 0xF200 /* Link status */ 616 #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ 617 struct wi_assoc { 618 u_int16_t wi_assoc_stat; /* Association Status */ 619 #define ASSOC 1 620 #define REASSOC 2 621 #define DISASSOC 3 622 #define ASSOCFAIL 4 623 #define AUTHFAIL 5 624 u_int8_t wi_assoc_sta[6]; /* Station Address */ 625 u_int8_t wi_assoc_osta[6]; /* OLD Station Address */ 626 u_int16_t wi_assoc_reason; /* Reason */ 627 u_int16_t wi_assoc_reserve; /* Reserved */ 628 }; 629 630 #define WI_INFO_AUTH_REQUEST 0xF202 /* Authentication Request (AP) */ 631 #define WI_INFO_POWERSAVE_COUNT 0xF203 /* PowerSave User Count (AP) */ 632 633 /* 634 * Scan Results of Prism2 chip 635 */ 636 637 #define MAXAPINFO 30 638 struct wi_scan_header { 639 u_int16_t wi_reserve; /* future use */ 640 u_int16_t wi_reason; /* The reason this scan was initiated 641 1: Host initiated 642 2: Firmware initiated 643 3: Inquiry request from host */ 644 }; 645 646 struct wi_scan_data_p2 { 647 u_int16_t wi_chid; /* BSS Channel ID from Probe Res.(PR)*/ 648 u_int16_t wi_noise; /* Average Noise Level of the PR */ 649 u_int16_t wi_signal; /* Signal Level on the PR */ 650 u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ 651 u_int16_t wi_interval; /* BSS beacon interval */ 652 u_int16_t wi_capinfo; /* BSS Capability Information 653 IEEE Std 802.11(1997) ,see 7.3.1.4 */ 654 u_int16_t wi_namelen; /* Length of SSID strings */ 655 u_int8_t wi_name[32]; /* SSID strings */ 656 u_int16_t wi_suprate[5]; /* Supported Rates element from the PR 657 IEEE Std 802.11(1997) ,see 7.3.2.2 */ 658 u_int16_t wi_rate; /* Data rate of the PR */ 659 #define WI_APRATE_1 0x0A /* 1 Mbps */ 660 #define WI_APRATE_2 0x14 /* 2 Mbps */ 661 #define WI_APRATE_5 0x37 /* 5.5 Mbps */ 662 #define WI_APRATE_11 0x6E /* 11 Mbps */ 663 }; 664 665 /* 666 * Scan Results of Lucent chip 667 */ 668 struct wi_scan_data { 669 u_int16_t wi_chid; /* BSS Channel ID from PR */ 670 u_int16_t wi_noise; /* Average Noise Level of the PR */ 671 u_int16_t wi_signal; /* Signal Level on the PR */ 672 u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ 673 u_int16_t wi_interval; /* BSS beacon interval */ 674 u_int16_t wi_capinfo; /* BSS Capability Information 675 IEEE Std 802.11(1997) ,see 7.3.1.4 */ 676 u_int16_t wi_namelen; /* Length of SSID strings */ 677 u_int8_t wi_name[32]; /* SSID strings */ 678 }; 679 680 /* 681 * transmit/receive frame structure 682 */ 683 struct wi_frame { 684 u_int16_t wi_status; /* 0x00 */ 685 u_int16_t wi_rsvd0; /* 0x02 */ /* 0 */ 686 u_int16_t wi_rsvd1; /* 0x04 */ /* 0 */ 687 u_int16_t wi_q_info; /* 0x06 */ 688 u_int16_t wi_txrate; /* 0x08 */ /* (Prism2 Only) */ 689 u_int16_t wi_retcount; /* 0x0A */ /* (Prism2 Only) */ 690 u_int16_t wi_tx_ctl; /* 0x0C */ 691 u_int16_t wi_frame_ctl; /* 0x0E */ 692 u_int16_t wi_id; /* 0x10 */ 693 u_int8_t wi_addr1[6]; /* 0x12 */ 694 u_int8_t wi_addr2[6]; /* 0x18 */ 695 u_int8_t wi_addr3[6]; /* 0x1E */ 696 u_int16_t wi_seq_ctl; /* 0x24 */ 697 u_int8_t wi_addr4[6]; /* 0x26 */ 698 u_int16_t wi_dat_len; /* 0x2C */ 699 u_int8_t wi_dst_addr[6]; /* 0x2E */ 700 u_int8_t wi_src_addr[6]; /* 0x34 */ 701 u_int16_t wi_len; /* 0x3A */ 702 u_int16_t wi_dat[3]; /* 0x3C */ /* SNAP header */ 703 u_int16_t wi_type; /* 0x42 */ 704 }; 705 706 #define WI_802_3_OFFSET 0x2E 707 #define WI_802_11_OFFSET 0x44 708 #define WI_802_11_OFFSET_RAW 0x3C 709 #define WI_802_11_OFFSET_HDR 0x0E 710 711 /* Tx Status Field */ 712 #define WI_TXSTAT_RET_ERR 0x0001 713 #define WI_TXSTAT_AGED_ERR 0x0002 714 #define WI_TXSTAT_DISCONNECT 0x0004 715 #define WI_TXSTAT_FORM_ERR 0x0008 716 717 /* Rx Status Field */ 718 #define WI_STAT_BADCRC 0x0001 719 #define WI_STAT_UNDECRYPTABLE 0x0002 720 #define WI_STAT_ERRSTAT 0x0003 721 #define WI_STAT_MAC_PORT 0x0700 722 #define WI_STAT_PCF 0x1000 723 #define WI_RXSTAT_MSG_TYPE 0xE000 724 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ 725 #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ 726 #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ 727 #define WI_STAT_MGMT 0x8000 /* 802.11b management frames */ 728 729 #define WI_ENC_TX_MGMT 0x08 730 #define WI_ENC_TX_E_II 0x0E 731 732 #define WI_ENC_TX_1042 0x00 733 #define WI_ENC_TX_TUNNEL 0xF8 734 735 /* TxControl Field (enhanced) */ 736 #define WI_TXCNTL_TX_OK 0x0002 737 #define WI_TXCNTL_TX_EX 0x0004 738 #define WI_TXCNTL_STRUCT_TYPE 0x0018 739 #define WI_ENC_TX_802_3 0x00 740 #define WI_ENC_TX_802_11 0x11 741 #define WI_TXCNTL_ALTRTRY 0x0020 742 #define WI_TXCNTL_NOCRYPT 0x0080 743 744 /* 745 * SNAP (sub-network access protocol) constants for transmission 746 * of IP datagrams over IEEE 802 networks, taken from RFC1042. 747 * We need these for the LLC/SNAP header fields in the TX/RX frame 748 * structure. 749 */ 750 #define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */ 751 #define WI_SNAP_K2 0x00 752 #define WI_SNAP_CONTROL 0x03 /* unnumbered information format */ 753 #define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8)) 754 #define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8)) 755 #define WI_SNAPHDR_LEN 0x6 756
Indexes created Fri Sep 26 20:09:58 GMT 2025