ess.c revision 1.76.16.1
1 /* $NetBSD: ess.c,v 1.76.16.1 2008/12/11 19:49:30 ad Exp $ */ 2 3 /* 4 * Copyright 1997 5 * Digital Equipment Corporation. All rights reserved. 6 * 7 * This software is furnished under license and may be used and 8 * copied only in accordance with the following terms and conditions. 9 * Subject to these conditions, you may download, copy, install, 10 * use, modify and distribute this software in source and/or binary 11 * form. No title or ownership is transferred hereby. 12 * 13 * 1) Any source code used, modified or distributed must reproduce 14 * and retain this copyright notice and list of conditions as 15 * they appear in the source file. 16 * 17 * 2) No right is granted to use any trade name, trademark, or logo of 18 * Digital Equipment Corporation. Neither the "Digital Equipment 19 * Corporation" name nor any trademark or logo of Digital Equipment 20 * Corporation may be used to endorse or promote products derived 21 * from this software without the prior written permission of 22 * Digital Equipment Corporation. 23 * 24 * 3) This software is provided "AS-IS" and any express or implied 25 * warranties, including but not limited to, any implied warranties 26 * of merchantability, fitness for a particular purpose, or 27 * non-infringement are disclaimed. In no event shall DIGITAL be 28 * liable for any damages whatsoever, and in particular, DIGITAL 29 * shall not be liable for special, indirect, consequential, or 30 * incidental damages or damages for lost profits, loss of 31 * revenue or loss of use, whether such damages arise in contract, 32 * negligence, tort, under statute, in equity, at law or otherwise, 33 * even if advised of the possibility of such damage. 34 */ 35 36 /* 37 **++ 38 ** 39 ** ess.c 40 ** 41 ** FACILITY: 42 ** 43 ** DIGITAL Network Appliance Reference Design (DNARD) 44 ** 45 ** MODULE DESCRIPTION: 46 ** 47 ** This module contains the device driver for the ESS 48 ** Technologies 1888/1887/888 sound chip. The code in sbdsp.c was 49 ** used as a reference point when implementing this driver. 50 ** 51 ** AUTHORS: 52 ** 53 ** Blair Fidler Software Engineering Australia 54 ** Gold Coast, Australia. 55 ** 56 ** CREATION DATE: 57 ** 58 ** March 10, 1997. 59 ** 60 ** MODIFICATION HISTORY: 61 ** 62 ** Heavily modified by Lennart Augustsson and Charles M. Hannum for 63 ** bus_dma, changes to audio interface, and many bug fixes. 64 ** ESS1788 support by Nathan J. Williams and Charles M. Hannum. 65 **-- 66 */ 67 68 #include <sys/cdefs.h> 69 __KERNEL_RCSID(0, "$NetBSD: ess.c,v 1.76.16.1 2008/12/11 19:49:30 ad Exp $"); 70 71 #include <sys/param.h> 72 #include <sys/systm.h> 73 #include <sys/errno.h> 74 #include <sys/ioctl.h> 75 #include <sys/syslog.h> 76 #include <sys/device.h> 77 #include <sys/proc.h> 78 #include <sys/kernel.h> 79 80 #include <sys/cpu.h> 81 #include <sys/intr.h> 82 #include <sys/bus.h> 83 84 #include <sys/audioio.h> 85 #include <dev/audio_if.h> 86 #include <dev/auconv.h> 87 #include <dev/mulaw.h> 88 89 #include <dev/isa/isavar.h> 90 #include <dev/isa/isadmavar.h> 91 92 #include <dev/isa/essvar.h> 93 #include <dev/isa/essreg.h> 94 95 #include "joy_ess.h" 96 97 #ifdef AUDIO_DEBUG 98 #define DPRINTF(x) if (essdebug) printf x 99 #define DPRINTFN(n,x) if (essdebug>(n)) printf x 100 int essdebug = 0; 101 #else 102 #define DPRINTF(x) 103 #define DPRINTFN(n,x) 104 #endif 105 106 #if 0 107 unsigned uuu; 108 #define EREAD1(t, h, a) (uuu=bus_space_read_1(t, h, a),printf("EREAD %02x=%02x\n", ((int)h&0xfff)+a, uuu),uuu) 109 #define EWRITE1(t, h, a, d) (printf("EWRITE %02x=%02x\n", ((int)h & 0xfff)+a, d), bus_space_write_1(t, h, a, d)) 110 #else 111 #define EREAD1(t, h, a) bus_space_read_1(t, h, a) 112 #define EWRITE1(t, h, a, d) bus_space_write_1(t, h, a, d) 113 #endif 114 115 116 int ess_setup_sc(struct ess_softc *, int); 117 118 int ess_open(void *, int); 119 void ess_close(void *); 120 int ess_getdev(void *, struct audio_device *); 121 int ess_drain(void *); 122 123 int ess_query_encoding(void *, struct audio_encoding *); 124 125 int ess_set_params(void *, int, int, audio_params_t *, 126 audio_params_t *, stream_filter_list_t *, stream_filter_list_t *); 127 128 int ess_round_blocksize(void *, int, int, const audio_params_t *); 129 130 int ess_audio1_trigger_output(void *, void *, void *, int, 131 void (*)(void *), void *, const audio_params_t *); 132 int ess_audio2_trigger_output(void *, void *, void *, int, 133 void (*)(void *), void *, const audio_params_t *); 134 int ess_audio1_trigger_input(void *, void *, void *, int, 135 void (*)(void *), void *, const audio_params_t *); 136 int ess_audio1_halt(void *); 137 int ess_audio2_halt(void *); 138 int ess_audio1_intr(void *); 139 int ess_audio2_intr(void *); 140 void ess_audio1_poll(void *); 141 void ess_audio2_poll(void *); 142 143 int ess_speaker_ctl(void *, int); 144 145 int ess_getdev(void *, struct audio_device *); 146 147 int ess_set_port(void *, mixer_ctrl_t *); 148 int ess_get_port(void *, mixer_ctrl_t *); 149 150 void *ess_malloc(void *, int, size_t, struct malloc_type *, int); 151 void ess_free(void *, void *, struct malloc_type *); 152 size_t ess_round_buffersize(void *, int, size_t); 153 paddr_t ess_mappage(void *, void *, off_t, int); 154 155 156 int ess_query_devinfo(void *, mixer_devinfo_t *); 157 int ess_1788_get_props(void *); 158 int ess_1888_get_props(void *); 159 void ess_get_locks(void *, kmutex_t **, kmutex_t **); 160 161 void ess_speaker_on(struct ess_softc *); 162 void ess_speaker_off(struct ess_softc *); 163 164 void ess_config_irq(struct ess_softc *); 165 void ess_config_drq(struct ess_softc *); 166 void ess_setup(struct ess_softc *); 167 int ess_identify(struct ess_softc *); 168 169 int ess_reset(struct ess_softc *); 170 void ess_set_gain(struct ess_softc *, int, int); 171 int ess_set_in_port(struct ess_softc *, int); 172 int ess_set_in_ports(struct ess_softc *, int); 173 u_int ess_srtotc(u_int); 174 u_int ess_srtofc(u_int); 175 u_char ess_get_dsp_status(struct ess_softc *); 176 u_char ess_dsp_read_ready(struct ess_softc *); 177 u_char ess_dsp_write_ready(struct ess_softc *); 178 int ess_rdsp(struct ess_softc *); 179 int ess_wdsp(struct ess_softc *, u_char); 180 u_char ess_read_x_reg(struct ess_softc *, u_char); 181 int ess_write_x_reg(struct ess_softc *, u_char, u_char); 182 void ess_clear_xreg_bits(struct ess_softc *, u_char, u_char); 183 void ess_set_xreg_bits(struct ess_softc *, u_char, u_char); 184 u_char ess_read_mix_reg(struct ess_softc *, u_char); 185 void ess_write_mix_reg(struct ess_softc *, u_char, u_char); 186 void ess_clear_mreg_bits(struct ess_softc *, u_char, u_char); 187 void ess_set_mreg_bits(struct ess_softc *, u_char, u_char); 188 void ess_read_multi_mix_reg(struct ess_softc *, u_char, u_int8_t *, bus_size_t); 189 190 static const char *essmodel[] = { 191 "unsupported", 192 193 "688", 194 "1688", 195 "1788", 196 "1868", 197 "1869", 198 "1878", 199 "1879", 200 201 "888", 202 "1887", 203 "1888", 204 }; 205 206 struct audio_device ess_device = { 207 "ESS Technology", 208 "x", 209 "ess" 210 }; 211 212 /* 213 * Define our interface to the higher level audio driver. 214 */ 215 216 const struct audio_hw_if ess_1788_hw_if = { 217 ess_open, 218 ess_close, 219 ess_drain, 220 ess_query_encoding, 221 ess_set_params, 222 ess_round_blocksize, 223 NULL, 224 NULL, 225 NULL, 226 NULL, 227 NULL, 228 ess_audio1_halt, 229 ess_audio1_halt, 230 ess_speaker_ctl, 231 ess_getdev, 232 NULL, 233 ess_set_port, 234 ess_get_port, 235 ess_query_devinfo, 236 ess_malloc, 237 ess_free, 238 ess_round_buffersize, 239 ess_mappage, 240 ess_1788_get_props, 241 ess_audio1_trigger_output, 242 ess_audio1_trigger_input, 243 NULL, 244 NULL, 245 ess_get_locks, 246 }; 247 248 const struct audio_hw_if ess_1888_hw_if = { 249 ess_open, 250 ess_close, 251 ess_drain, 252 ess_query_encoding, 253 ess_set_params, 254 ess_round_blocksize, 255 NULL, 256 NULL, 257 NULL, 258 NULL, 259 NULL, 260 ess_audio2_halt, 261 ess_audio1_halt, 262 ess_speaker_ctl, 263 ess_getdev, 264 NULL, 265 ess_set_port, 266 ess_get_port, 267 ess_query_devinfo, 268 ess_malloc, 269 ess_free, 270 ess_round_buffersize, 271 ess_mappage, 272 ess_1888_get_props, 273 ess_audio2_trigger_output, 274 ess_audio1_trigger_input, 275 NULL, 276 NULL, 277 ess_get_locks, 278 }; 279 280 #define ESS_NFORMATS 8 281 static const struct audio_format ess_formats[ESS_NFORMATS] = { 282 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_SLINEAR_LE, 16, 16, 283 2, AUFMT_STEREO, 0, {ESS_MINRATE, ESS_MAXRATE}}, 284 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_SLINEAR_LE, 16, 16, 285 1, AUFMT_MONAURAL, 0, {ESS_MINRATE, ESS_MAXRATE}}, 286 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_ULINEAR_LE, 16, 16, 287 2, AUFMT_STEREO, 0, {ESS_MINRATE, ESS_MAXRATE}}, 288 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_ULINEAR_LE, 16, 16, 289 1, AUFMT_MONAURAL, 0, {ESS_MINRATE, ESS_MAXRATE}}, 290 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_ULINEAR_LE, 8, 8, 291 2, AUFMT_STEREO, 0, {ESS_MINRATE, ESS_MAXRATE}}, 292 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_ULINEAR_LE, 8, 8, 293 1, AUFMT_MONAURAL, 0, {ESS_MINRATE, ESS_MAXRATE}}, 294 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_SLINEAR_LE, 8, 8, 295 2, AUFMT_STEREO, 0, {ESS_MINRATE, ESS_MAXRATE}}, 296 {NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_SLINEAR_LE, 8, 8, 297 1, AUFMT_MONAURAL, 0, {ESS_MINRATE, ESS_MAXRATE}}, 298 }; 299 300 #ifdef AUDIO_DEBUG 301 void ess_printsc(struct ess_softc *); 302 void ess_dump_mixer(struct ess_softc *); 303 304 void 305 ess_printsc(struct ess_softc *sc) 306 { 307 int i; 308 309 printf("iobase 0x%x outport %u inport %u speaker %s\n", 310 sc->sc_iobase, sc->out_port, 311 sc->in_port, sc->spkr_state ? "on" : "off"); 312 313 printf("audio1: DMA chan %d irq %d nintr %lu intr %p arg %p\n", 314 sc->sc_audio1.drq, sc->sc_audio1.irq, sc->sc_audio1.nintr, 315 sc->sc_audio1.intr, sc->sc_audio1.arg); 316 317 if (!ESS_USE_AUDIO1(sc->sc_model)) { 318 printf("audio2: DMA chan %d irq %d nintr %lu intr %p arg %p\n", 319 sc->sc_audio2.drq, sc->sc_audio2.irq, sc->sc_audio2.nintr, 320 sc->sc_audio2.intr, sc->sc_audio2.arg); 321 } 322 323 printf("gain:"); 324 for (i = 0; i < sc->ndevs; i++) 325 printf(" %u,%u", sc->gain[i][ESS_LEFT], sc->gain[i][ESS_RIGHT]); 326 printf("\n"); 327 } 328 329 void 330 ess_dump_mixer(struct ess_softc *sc) 331 { 332 333 printf("ESS_DAC_PLAY_VOL: mix reg 0x%02x=0x%02x\n", 334 0x7C, ess_read_mix_reg(sc, 0x7C)); 335 printf("ESS_MIC_PLAY_VOL: mix reg 0x%02x=0x%02x\n", 336 0x1A, ess_read_mix_reg(sc, 0x1A)); 337 printf("ESS_LINE_PLAY_VOL: mix reg 0x%02x=0x%02x\n", 338 0x3E, ess_read_mix_reg(sc, 0x3E)); 339 printf("ESS_SYNTH_PLAY_VOL: mix reg 0x%02x=0x%02x\n", 340 0x36, ess_read_mix_reg(sc, 0x36)); 341 printf("ESS_CD_PLAY_VOL: mix reg 0x%02x=0x%02x\n", 342 0x38, ess_read_mix_reg(sc, 0x38)); 343 printf("ESS_AUXB_PLAY_VOL: mix reg 0x%02x=0x%02x\n", 344 0x3A, ess_read_mix_reg(sc, 0x3A)); 345 printf("ESS_MASTER_VOL: mix reg 0x%02x=0x%02x\n", 346 0x32, ess_read_mix_reg(sc, 0x32)); 347 printf("ESS_PCSPEAKER_VOL: mix reg 0x%02x=0x%02x\n", 348 0x3C, ess_read_mix_reg(sc, 0x3C)); 349 printf("ESS_DAC_REC_VOL: mix reg 0x%02x=0x%02x\n", 350 0x69, ess_read_mix_reg(sc, 0x69)); 351 printf("ESS_MIC_REC_VOL: mix reg 0x%02x=0x%02x\n", 352 0x68, ess_read_mix_reg(sc, 0x68)); 353 printf("ESS_LINE_REC_VOL: mix reg 0x%02x=0x%02x\n", 354 0x6E, ess_read_mix_reg(sc, 0x6E)); 355 printf("ESS_SYNTH_REC_VOL: mix reg 0x%02x=0x%02x\n", 356 0x6B, ess_read_mix_reg(sc, 0x6B)); 357 printf("ESS_CD_REC_VOL: mix reg 0x%02x=0x%02x\n", 358 0x6A, ess_read_mix_reg(sc, 0x6A)); 359 printf("ESS_AUXB_REC_VOL: mix reg 0x%02x=0x%02x\n", 360 0x6C, ess_read_mix_reg(sc, 0x6C)); 361 printf("ESS_RECORD_VOL: x reg 0x%02x=0x%02x\n", 362 0xB4, ess_read_x_reg(sc, 0xB4)); 363 printf("Audio 1 play vol (unused): mix reg 0x%02x=0x%02x\n", 364 0x14, ess_read_mix_reg(sc, 0x14)); 365 366 printf("ESS_MIC_PREAMP: x reg 0x%02x=0x%02x\n", 367 ESS_XCMD_PREAMP_CTRL, ess_read_x_reg(sc, ESS_XCMD_PREAMP_CTRL)); 368 printf("ESS_RECORD_MONITOR: x reg 0x%02x=0x%02x\n", 369 ESS_XCMD_AUDIO_CTRL, ess_read_x_reg(sc, ESS_XCMD_AUDIO_CTRL)); 370 printf("Record source: mix reg 0x%02x=0x%02x, 0x%02x=0x%02x\n", 371 ESS_MREG_ADC_SOURCE, ess_read_mix_reg(sc, ESS_MREG_ADC_SOURCE), 372 ESS_MREG_AUDIO2_CTRL2, ess_read_mix_reg(sc, ESS_MREG_AUDIO2_CTRL2)); 373 } 374 375 #endif 376 377 /* 378 * Configure the ESS chip for the desired audio base address. 379 */ 380 int 381 ess_config_addr(struct ess_softc *sc) 382 { 383 int iobase; 384 bus_space_tag_t iot; 385 /* 386 * Configure using the System Control Register method. This 387 * method is used when the AMODE line is tied high, which is 388 * the case for the Shark, but not for the evaluation board. 389 */ 390 bus_space_handle_t scr_access_ioh; 391 bus_space_handle_t scr_ioh; 392 u_short scr_value; 393 394 iobase = sc->sc_iobase; 395 iot = sc->sc_iot; 396 /* 397 * Set the SCR bit to enable audio. 398 */ 399 scr_value = ESS_SCR_AUDIO_ENABLE; 400 401 /* 402 * Set the SCR bits necessary to select the specified audio 403 * base address. 404 */ 405 switch(iobase) { 406 case 0x220: 407 scr_value |= ESS_SCR_AUDIO_220; 408 break; 409 case 0x230: 410 scr_value |= ESS_SCR_AUDIO_230; 411 break; 412 case 0x240: 413 scr_value |= ESS_SCR_AUDIO_240; 414 break; 415 case 0x250: 416 scr_value |= ESS_SCR_AUDIO_250; 417 break; 418 default: 419 printf("ess: configured iobase 0x%x invalid\n", iobase); 420 return 1; 421 break; 422 } 423 424 /* 425 * Get a mapping for the System Control Register (SCR) access 426 * registers and the SCR data registers. 427 */ 428 if (bus_space_map(iot, ESS_SCR_ACCESS_BASE, ESS_SCR_ACCESS_PORTS, 429 0, &scr_access_ioh)) { 430 printf("ess: can't map SCR access registers\n"); 431 return 1; 432 } 433 if (bus_space_map(iot, ESS_SCR_BASE, ESS_SCR_PORTS, 434 0, &scr_ioh)) { 435 printf("ess: can't map SCR registers\n"); 436 bus_space_unmap(iot, scr_access_ioh, ESS_SCR_ACCESS_PORTS); 437 return 1; 438 } 439 440 /* Unlock the SCR. */ 441 EWRITE1(iot, scr_access_ioh, ESS_SCR_UNLOCK, 0); 442 443 /* Write the base address information into SCR[0]. */ 444 EWRITE1(iot, scr_ioh, ESS_SCR_INDEX, 0); 445 EWRITE1(iot, scr_ioh, ESS_SCR_DATA, scr_value); 446 447 /* Lock the SCR. */ 448 EWRITE1(iot, scr_access_ioh, ESS_SCR_LOCK, 0); 449 450 /* Unmap the SCR access ports and the SCR data ports. */ 451 bus_space_unmap(iot, scr_access_ioh, ESS_SCR_ACCESS_PORTS); 452 bus_space_unmap(iot, scr_ioh, ESS_SCR_PORTS); 453 454 return 0; 455 } 456 457 458 /* 459 * Configure the ESS chip for the desired IRQ and DMA channels. 460 * ESS ISA 461 * -------- 462 * IRQA irq9 463 * IRQB irq5 464 * IRQC irq7 465 * IRQD irq10 466 * IRQE irq15 467 * 468 * DRQA drq0 469 * DRQB drq1 470 * DRQC drq3 471 * DRQD drq5 472 */ 473 void 474 ess_config_irq(struct ess_softc *sc) 475 { 476 int v; 477 478 DPRINTFN(2,("ess_config_irq\n")); 479 480 if (sc->sc_model == ESS_1887 && 481 sc->sc_audio1.irq == sc->sc_audio2.irq && 482 sc->sc_audio1.irq != -1) { 483 /* Use new method, both interrupts are the same. */ 484 v = ESS_IS_SELECT_IRQ; /* enable intrs */ 485 switch (sc->sc_audio1.irq) { 486 case 5: 487 v |= ESS_IS_INTRB; 488 break; 489 case 7: 490 v |= ESS_IS_INTRC; 491 break; 492 case 9: 493 v |= ESS_IS_INTRA; 494 break; 495 case 10: 496 v |= ESS_IS_INTRD; 497 break; 498 case 15: 499 v |= ESS_IS_INTRE; 500 break; 501 #ifdef DIAGNOSTIC 502 default: 503 printf("ess_config_irq: configured irq %d not supported for Audio 1\n", 504 sc->sc_audio1.irq); 505 return; 506 #endif 507 } 508 /* Set the IRQ */ 509 ess_write_mix_reg(sc, ESS_MREG_INTR_ST, v); 510 return; 511 } 512 513 if (sc->sc_model == ESS_1887) { 514 /* Tell the 1887 to use the old interrupt method. */ 515 ess_write_mix_reg(sc, ESS_MREG_INTR_ST, ESS_IS_ES1888); 516 } 517 518 if (sc->sc_audio1.polled) { 519 /* Turn off Audio1 interrupts. */ 520 v = 0; 521 } else { 522 /* Configure Audio 1 for the appropriate IRQ line. */ 523 v = ESS_IRQ_CTRL_MASK | ESS_IRQ_CTRL_EXT; /* All intrs on */ 524 switch (sc->sc_audio1.irq) { 525 case 5: 526 v |= ESS_IRQ_CTRL_INTRB; 527 break; 528 case 7: 529 v |= ESS_IRQ_CTRL_INTRC; 530 break; 531 case 9: 532 v |= ESS_IRQ_CTRL_INTRA; 533 break; 534 case 10: 535 v |= ESS_IRQ_CTRL_INTRD; 536 break; 537 #ifdef DIAGNOSTIC 538 default: 539 printf("ess: configured irq %d not supported for Audio 1\n", 540 sc->sc_audio1.irq); 541 return; 542 #endif 543 } 544 } 545 ess_write_x_reg(sc, ESS_XCMD_IRQ_CTRL, v); 546 547 if (ESS_USE_AUDIO1(sc->sc_model)) 548 return; 549 550 if (sc->sc_audio2.polled) { 551 /* Turn off Audio2 interrupts. */ 552 ess_clear_mreg_bits(sc, ESS_MREG_AUDIO2_CTRL2, 553 ESS_AUDIO2_CTRL2_IRQ2_ENABLE); 554 } else { 555 /* Audio2 is hardwired to INTRE in this mode. */ 556 ess_set_mreg_bits(sc, ESS_MREG_AUDIO2_CTRL2, 557 ESS_AUDIO2_CTRL2_IRQ2_ENABLE); 558 } 559 } 560 561 562 void 563 ess_config_drq(struct ess_softc *sc) 564 { 565 int v; 566 567 DPRINTFN(2,("ess_config_drq\n")); 568 569 /* Configure Audio 1 (record) for DMA on the appropriate channel. */ 570 v = ESS_DRQ_CTRL_PU | ESS_DRQ_CTRL_EXT; 571 switch (sc->sc_audio1.drq) { 572 case 0: 573 v |= ESS_DRQ_CTRL_DRQA; 574 break; 575 case 1: 576 v |= ESS_DRQ_CTRL_DRQB; 577 break; 578 case 3: 579 v |= ESS_DRQ_CTRL_DRQC; 580 break; 581 #ifdef DIAGNOSTIC 582 default: 583 printf("ess_config_drq: configured DMA chan %d not supported for Audio 1\n", 584 sc->sc_audio1.drq); 585 return; 586 #endif 587 } 588 /* Set DRQ1 */ 589 ess_write_x_reg(sc, ESS_XCMD_DRQ_CTRL, v); 590 591 if (ESS_USE_AUDIO1(sc->sc_model)) 592 return; 593 594 /* Configure DRQ2 */ 595 v = ESS_AUDIO2_CTRL3_DRQ_PD; 596 switch (sc->sc_audio2.drq) { 597 case 0: 598 v |= ESS_AUDIO2_CTRL3_DRQA; 599 break; 600 case 1: 601 v |= ESS_AUDIO2_CTRL3_DRQB; 602 break; 603 case 3: 604 v |= ESS_AUDIO2_CTRL3_DRQC; 605 break; 606 case 5: 607 v |= ESS_AUDIO2_CTRL3_DRQD; 608 break; 609 #ifdef DIAGNOSTIC 610 default: 611 printf("ess_config_drq: configured DMA chan %d not supported for Audio 2\n", 612 sc->sc_audio2.drq); 613 return; 614 #endif 615 } 616 ess_write_mix_reg(sc, ESS_MREG_AUDIO2_CTRL3, v); 617 /* Enable DMA 2 */ 618 ess_set_mreg_bits(sc, ESS_MREG_AUDIO2_CTRL2, 619 ESS_AUDIO2_CTRL2_DMA_ENABLE); 620 } 621 622 /* 623 * Set up registers after a reset. 624 */ 625 void 626 ess_setup(struct ess_softc *sc) 627 { 628 629 ess_config_irq(sc); 630 ess_config_drq(sc); 631 632 DPRINTFN(2,("ess_setup: done\n")); 633 } 634 635 /* 636 * Determine the model of ESS chip we are talking to. Currently we 637 * only support ES1888, ES1887 and ES888. The method of determining 638 * the chip is based on the information on page 27 of the ES1887 data 639 * sheet. 640 * 641 * This routine sets the values of sc->sc_model and sc->sc_version. 642 */ 643 int 644 ess_identify(struct ess_softc *sc) 645 { 646 u_char reg1; 647 u_char reg2; 648 u_char reg3; 649 u_int8_t ident[4]; 650 651 sc->sc_model = ESS_UNSUPPORTED; 652 sc->sc_version = 0; 653 654 memset(ident, 0, sizeof(ident)); 655 656 /* 657 * 1. Check legacy ID bytes. These should be 0x68 0x8n, where 658 * n >= 8 for an ES1887 or an ES888. Other values indicate 659 * earlier (unsupported) chips. 660 */ 661 ess_wdsp(sc, ESS_ACMD_LEGACY_ID); 662 663 if ((reg1 = ess_rdsp(sc)) != 0x68) { 664 printf("ess: First ID byte wrong (0x%02x)\n", reg1); 665 return 1; 666 } 667 668 reg2 = ess_rdsp(sc); 669 if (((reg2 & 0xf0) != 0x80) || 670 ((reg2 & 0x0f) < 8)) { 671 sc->sc_model = ESS_688; 672 return 0; 673 } 674 675 /* 676 * Store the ID bytes as the version. 677 */ 678 sc->sc_version = (reg1 << 8) + reg2; 679 680 681 /* 682 * 2. Verify we can change bit 2 in mixer register 0x64. This 683 * should be possible on all supported chips. 684 */ 685 reg1 = ess_read_mix_reg(sc, ESS_MREG_VOLUME_CTRL); 686 reg2 = reg1 ^ 0x04; /* toggle bit 2 */ 687 688 ess_write_mix_reg(sc, ESS_MREG_VOLUME_CTRL, reg2); 689 690 if (ess_read_mix_reg(sc, ESS_MREG_VOLUME_CTRL) != reg2) { 691 switch (sc->sc_version) { 692 case 0x688b: 693 sc->sc_model = ESS_1688; 694 break; 695 default: 696 printf("ess: Hardware error (unable to toggle bit 2 of mixer register 0x64)\n"); 697 return 1; 698 } 699 return 0; 700 } 701 702 /* 703 * Restore the original value of mixer register 0x64. 704 */ 705 ess_write_mix_reg(sc, ESS_MREG_VOLUME_CTRL, reg1); 706 707 708 /* 709 * 3. Verify we can change the value of mixer register 710 * ESS_MREG_SAMPLE_RATE. 711 * This is possible on the 1888/1887/888, but not on the 1788. 712 * It is not necessary to restore the value of this mixer register. 713 */ 714 reg1 = ess_read_mix_reg(sc, ESS_MREG_SAMPLE_RATE); 715 reg2 = reg1 ^ 0xff; /* toggle all bits */ 716 717 ess_write_mix_reg(sc, ESS_MREG_SAMPLE_RATE, reg2); 718 719 if (ess_read_mix_reg(sc, ESS_MREG_SAMPLE_RATE) != reg2) { 720 /* If we got this far before failing, it's a 1788. */ 721 sc->sc_model = ESS_1788; 722 723 /* 724 * Identify ESS model for ES18[67]8. 725 */ 726 ess_read_multi_mix_reg(sc, 0x40, ident, sizeof(ident)); 727 if(ident[0] == 0x18) { 728 switch(ident[1]) { 729 case 0x68: 730 sc->sc_model = ESS_1868; 731 break; 732 case 0x78: 733 sc->sc_model = ESS_1878; 734 break; 735 } 736 } 737 738 return 0; 739 } 740 741 /* 742 * 4. Determine if we can change bit 5 in mixer register 0x64. 743 * This determines whether we have an ES1887: 744 * 745 * - can change indicates ES1887 746 * - can't change indicates ES1888 or ES888 747 */ 748 reg1 = ess_read_mix_reg(sc, ESS_MREG_VOLUME_CTRL); 749 reg2 = reg1 ^ 0x20; /* toggle bit 5 */ 750 751 ess_write_mix_reg(sc, ESS_MREG_VOLUME_CTRL, reg2); 752 753 if (ess_read_mix_reg(sc, ESS_MREG_VOLUME_CTRL) == reg2) { 754 sc->sc_model = ESS_1887; 755 756 /* 757 * Restore the original value of mixer register 0x64. 758 */ 759 ess_write_mix_reg(sc, ESS_MREG_VOLUME_CTRL, reg1); 760 761 /* 762 * Identify ESS model for ES18[67]9. 763 */ 764 ess_read_multi_mix_reg(sc, 0x40, ident, sizeof(ident)); 765 if(ident[0] == 0x18) { 766 switch(ident[1]) { 767 case 0x69: 768 sc->sc_model = ESS_1869; 769 break; 770 case 0x79: 771 sc->sc_model = ESS_1879; 772 break; 773 } 774 } 775 776 return 0; 777 } 778 779 /* 780 * 5. Determine if we can change the value of mixer 781 * register 0x69 independently of mixer register 782 * 0x68. This determines which chip we have: 783 * 784 * - can modify idependently indicates ES888 785 * - register 0x69 is an alias of 0x68 indicates ES1888 786 */ 787 reg1 = ess_read_mix_reg(sc, 0x68); 788 reg2 = ess_read_mix_reg(sc, 0x69); 789 reg3 = reg2 ^ 0xff; /* toggle all bits */ 790 791 /* 792 * Write different values to each register. 793 */ 794 ess_write_mix_reg(sc, 0x68, reg2); 795 ess_write_mix_reg(sc, 0x69, reg3); 796 797 if (ess_read_mix_reg(sc, 0x68) == reg2 && 798 ess_read_mix_reg(sc, 0x69) == reg3) 799 sc->sc_model = ESS_888; 800 else 801 sc->sc_model = ESS_1888; 802 803 /* 804 * Restore the original value of the registers. 805 */ 806 ess_write_mix_reg(sc, 0x68, reg1); 807 ess_write_mix_reg(sc, 0x69, reg2); 808 809 return 0; 810 } 811 812 813 int 814 ess_setup_sc(struct ess_softc *sc, int doinit) 815 { 816 817 callout_init(&sc->sc_poll1_ch, 0); 818 callout_init(&sc->sc_poll2_ch, 0); 819 820 /* Reset the chip. */ 821 if (ess_reset(sc) != 0) { 822 DPRINTF(("ess_setup_sc: couldn't reset chip\n")); 823 return 1; 824 } 825 826 /* Identify the ESS chip, and check that it is supported. */ 827 if (ess_identify(sc)) { 828 DPRINTF(("ess_setup_sc: couldn't identify\n")); 829 return 1; 830 } 831 832 return 0; 833 } 834 835 /* 836 * Probe for the ESS hardware. 837 */ 838 int 839 essmatch(struct ess_softc *sc) 840 { 841 if (!ESS_BASE_VALID(sc->sc_iobase)) { 842 printf("ess: configured iobase 0x%x invalid\n", sc->sc_iobase); 843 return 0; 844 } 845 846 if (ess_setup_sc(sc, 1)) 847 return 0; 848 849 if (sc->sc_model == ESS_UNSUPPORTED) { 850 DPRINTF(("ess: Unsupported model\n")); 851 return 0; 852 } 853 854 /* Check that requested DMA channels are valid and different. */ 855 if (!ESS_DRQ1_VALID(sc->sc_audio1.drq)) { 856 printf("ess: record drq %d invalid\n", sc->sc_audio1.drq); 857 return 0; 858 } 859 if (!isa_drq_isfree(sc->sc_ic, sc->sc_audio1.drq)) 860 return 0; 861 if (!ESS_USE_AUDIO1(sc->sc_model)) { 862 if (!ESS_DRQ2_VALID(sc->sc_audio2.drq)) { 863 printf("ess: play drq %d invalid\n", sc->sc_audio2.drq); 864 return 0; 865 } 866 if (sc->sc_audio1.drq == sc->sc_audio2.drq) { 867 printf("ess: play and record drq both %d\n", 868 sc->sc_audio1.drq); 869 return 0; 870 } 871 if (!isa_drq_isfree(sc->sc_ic, sc->sc_audio2.drq)) 872 return 0; 873 } 874 875 /* 876 * The 1887 has an additional IRQ mode where both channels are mapped 877 * to the same IRQ. 878 */ 879 if (sc->sc_model == ESS_1887 && 880 sc->sc_audio1.irq == sc->sc_audio2.irq && 881 sc->sc_audio1.irq != -1 && 882 ESS_IRQ12_VALID(sc->sc_audio1.irq)) 883 goto irq_not1888; 884 885 /* Check that requested IRQ lines are valid and different. */ 886 if (sc->sc_audio1.irq != -1 && 887 !ESS_IRQ1_VALID(sc->sc_audio1.irq)) { 888 printf("ess: record irq %d invalid\n", sc->sc_audio1.irq); 889 return 0; 890 } 891 if (!ESS_USE_AUDIO1(sc->sc_model)) { 892 if (sc->sc_audio2.irq != -1 && 893 !ESS_IRQ2_VALID(sc->sc_audio2.irq)) { 894 printf("ess: play irq %d invalid\n", sc->sc_audio2.irq); 895 return 0; 896 } 897 if (sc->sc_audio1.irq == sc->sc_audio2.irq && 898 sc->sc_audio1.irq != -1) { 899 printf("ess: play and record irq both %d\n", 900 sc->sc_audio1.irq); 901 return 0; 902 } 903 } 904 905 irq_not1888: 906 /* XXX should we check IRQs as well? */ 907 908 return 2; /* beat "sb" */ 909 } 910 911 912 /* 913 * Attach hardware to driver, attach hardware driver to audio 914 * pseudo-device driver. 915 */ 916 void 917 essattach(struct ess_softc *sc, int enablejoy) 918 { 919 struct audio_attach_args arg; 920 int i; 921 u_int v; 922 923 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE); 924 mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_SCHED); 925 926 if (ess_setup_sc(sc, 0)) { 927 printf(": setup failed\n"); 928 return; 929 } 930 931 printf(": ESS Technology ES%s [version 0x%04x]\n", 932 essmodel[sc->sc_model], sc->sc_version); 933 934 sc->sc_audio1.polled = sc->sc_audio1.irq == -1; 935 if (!sc->sc_audio1.polled) { 936 sc->sc_audio1.ih = isa_intr_establish(sc->sc_ic, 937 sc->sc_audio1.irq, sc->sc_audio1.ist, IPL_AUDIO, 938 ess_audio1_intr, sc); 939 printf("%s: audio1 interrupting at irq %d\n", 940 device_xname(&sc->sc_dev), sc->sc_audio1.irq); 941 } else 942 printf("%s: audio1 polled\n", device_xname(&sc->sc_dev)); 943 sc->sc_audio1.maxsize = isa_dmamaxsize(sc->sc_ic, sc->sc_audio1.drq); 944 945 if (isa_drq_alloc(sc->sc_ic, sc->sc_audio1.drq) != 0) { 946 aprint_error_dev(&sc->sc_dev, "can't reserve drq %d\n", 947 sc->sc_audio1.drq); 948 return; 949 } 950 951 if (isa_dmamap_create(sc->sc_ic, sc->sc_audio1.drq, 952 sc->sc_audio1.maxsize, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW)) { 953 aprint_error_dev(&sc->sc_dev, "can't create map for drq %d\n", 954 sc->sc_audio1.drq); 955 return; 956 } 957 958 if (!ESS_USE_AUDIO1(sc->sc_model)) { 959 sc->sc_audio2.polled = sc->sc_audio2.irq == -1; 960 if (!sc->sc_audio2.polled) { 961 sc->sc_audio2.ih = isa_intr_establish(sc->sc_ic, 962 sc->sc_audio2.irq, sc->sc_audio2.ist, IPL_AUDIO, 963 ess_audio2_intr, sc); 964 printf("%s: audio2 interrupting at irq %d\n", 965 device_xname(&sc->sc_dev), sc->sc_audio2.irq); 966 } else 967 printf("%s: audio2 polled\n", device_xname(&sc->sc_dev)); 968 sc->sc_audio2.maxsize = isa_dmamaxsize(sc->sc_ic, 969 sc->sc_audio2.drq); 970 971 if (isa_drq_alloc(sc->sc_ic, sc->sc_audio2.drq) != 0) { 972 aprint_error_dev(&sc->sc_dev, "can't reserve drq %d\n", 973 sc->sc_audio2.drq); 974 return; 975 } 976 977 if (isa_dmamap_create(sc->sc_ic, sc->sc_audio2.drq, 978 sc->sc_audio2.maxsize, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW)) { 979 aprint_error_dev(&sc->sc_dev, "can't create map for drq %d\n", 980 sc->sc_audio2.drq); 981 return; 982 } 983 } 984 985 /* Do a hardware reset on the mixer. */ 986 ess_write_mix_reg(sc, ESS_MIX_RESET, ESS_MIX_RESET); 987 988 /* 989 * Set volume of Audio 1 to zero and disable Audio 1 DAC input 990 * to playback mixer, since playback is always through Audio 2. 991 */ 992 if (!ESS_USE_AUDIO1(sc->sc_model)) 993 ess_write_mix_reg(sc, ESS_MREG_VOLUME_VOICE, 0); 994 ess_wdsp(sc, ESS_ACMD_DISABLE_SPKR); 995 996 if (ESS_USE_AUDIO1(sc->sc_model)) { 997 ess_write_mix_reg(sc, ESS_MREG_ADC_SOURCE, ESS_SOURCE_MIC); 998 sc->in_port = ESS_SOURCE_MIC; 999 sc->ndevs = ESS_1788_NDEVS; 1000 } else { 1001 /* 1002 * Set hardware record source to use output of the record 1003 * mixer. We do the selection of record source in software by 1004 * setting the gain of the unused sources to zero. (See 1005 * ess_set_in_ports.) 1006 */ 1007 ess_write_mix_reg(sc, ESS_MREG_ADC_SOURCE, ESS_SOURCE_MIXER); 1008 sc->in_mask = 1 << ESS_MIC_REC_VOL; 1009 sc->ndevs = ESS_1888_NDEVS; 1010 ess_clear_mreg_bits(sc, ESS_MREG_AUDIO2_CTRL2, 0x10); 1011 ess_set_mreg_bits(sc, ESS_MREG_AUDIO2_CTRL2, 0x08); 1012 } 1013 1014 /* 1015 * Set gain on each mixer device to a sensible value. 1016 * Devices not normally used are turned off, and other devices 1017 * are set to 50% volume. 1018 */ 1019 for (i = 0; i < sc->ndevs; i++) { 1020 switch (i) { 1021 case ESS_MIC_PLAY_VOL: 1022 case ESS_LINE_PLAY_VOL: 1023 case ESS_CD_PLAY_VOL: 1024 case ESS_AUXB_PLAY_VOL: 1025 case ESS_DAC_REC_VOL: 1026 case ESS_LINE_REC_VOL: 1027 case ESS_SYNTH_REC_VOL: 1028 case ESS_CD_REC_VOL: 1029 case ESS_AUXB_REC_VOL: 1030 v = 0; 1031 break; 1032 default: 1033 v = ESS_4BIT_GAIN(AUDIO_MAX_GAIN / 2); 1034 break; 1035 } 1036 sc->gain[i][ESS_LEFT] = sc->gain[i][ESS_RIGHT] = v; 1037 ess_set_gain(sc, i, 1); 1038 } 1039 1040 ess_setup(sc); 1041 1042 /* Disable the speaker until the device is opened. */ 1043 ess_speaker_off(sc); 1044 sc->spkr_state = SPKR_OFF; 1045 1046 snprintf(ess_device.name, sizeof(ess_device.name), "ES%s", 1047 essmodel[sc->sc_model]); 1048 snprintf(ess_device.version, sizeof(ess_device.version), "0x%04x", 1049 sc->sc_version); 1050 1051 if (ESS_USE_AUDIO1(sc->sc_model)) 1052 audio_attach_mi(&ess_1788_hw_if, sc, &sc->sc_dev); 1053 else 1054 audio_attach_mi(&ess_1888_hw_if, sc, &sc->sc_dev); 1055 1056 arg.type = AUDIODEV_TYPE_OPL; 1057 arg.hwif = 0; 1058 arg.hdl = 0; 1059 (void)config_found(&sc->sc_dev, &arg, audioprint); 1060 1061 #if NJOY_ESS > 0 1062 if (sc->sc_model == ESS_1888 && enablejoy) { 1063 unsigned char m40; 1064 1065 m40 = ess_read_mix_reg(sc, 0x40); 1066 m40 |= 2; 1067 ess_write_mix_reg(sc, 0x40, m40); 1068 1069 arg.type = AUDIODEV_TYPE_AUX; 1070 (void)config_found(&sc->sc_dev, &arg, audioprint); 1071 } 1072 #endif 1073 1074 #ifdef AUDIO_DEBUG 1075 if (essdebug > 0) 1076 ess_printsc(sc); 1077 #endif 1078 } 1079 1080 /* 1081 * Various routines to interface to higher level audio driver 1082 */ 1083 1084 int 1085 ess_open(void *addr, int flags) 1086 { 1087 return 0; 1088 } 1089 1090 void 1091 ess_close(void *addr) 1092 { 1093 struct ess_softc *sc; 1094 1095 sc = addr; 1096 DPRINTF(("ess_close: sc=%p\n", sc)); 1097 1098 ess_speaker_off(sc); 1099 sc->spkr_state = SPKR_OFF; 1100 1101 DPRINTF(("ess_close: closed\n")); 1102 } 1103 1104 /* 1105 * Wait for FIFO to drain, and analog section to settle. 1106 * XXX should check FIFO empty bit. 1107 */ 1108 int 1109 ess_drain(void *addr) 1110 { 1111 struct ess_softc *sc; 1112 1113 sc = addr; 1114 kpause("essdr", FALSE, hz/20, &sc->sc_lock); /* XXX */ 1115 1116 return 0; 1117 } 1118 1119 /* XXX should use reference count */ 1120 int 1121 ess_speaker_ctl(void *addr, int newstate) 1122 { 1123 struct ess_softc *sc; 1124 1125 sc = addr; 1126 if ((newstate == SPKR_ON) && (sc->spkr_state == SPKR_OFF)) { 1127 ess_speaker_on(sc); 1128 sc->spkr_state = SPKR_ON; 1129 } 1130 if ((newstate == SPKR_OFF) && (sc->spkr_state == SPKR_ON)) { 1131 ess_speaker_off(sc); 1132 sc->spkr_state = SPKR_OFF; 1133 } 1134 return 0; 1135 } 1136 1137 int 1138 ess_getdev(void *addr, struct audio_device *retp) 1139 { 1140 1141 *retp = ess_device; 1142 return 0; 1143 } 1144 1145 int 1146 ess_query_encoding(void *addr, struct audio_encoding *fp) 1147 { 1148 /*struct ess_softc *sc = addr;*/ 1149 1150 switch (fp->index) { 1151 case 0: 1152 strcpy(fp->name, AudioEulinear); 1153 fp->encoding = AUDIO_ENCODING_ULINEAR; 1154 fp->precision = 8; 1155 fp->flags = 0; 1156 return 0; 1157 case 1: 1158 strcpy(fp->name, AudioEmulaw); 1159 fp->encoding = AUDIO_ENCODING_ULAW; 1160 fp->precision = 8; 1161 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 1162 return 0; 1163 case 2: 1164 strcpy(fp->name, AudioEalaw); 1165 fp->encoding = AUDIO_ENCODING_ALAW; 1166 fp->precision = 8; 1167 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 1168 return 0; 1169 case 3: 1170 strcpy(fp->name, AudioEslinear); 1171 fp->encoding = AUDIO_ENCODING_SLINEAR; 1172 fp->precision = 8; 1173 fp->flags = 0; 1174 return 0; 1175 case 4: 1176 strcpy(fp->name, AudioEslinear_le); 1177 fp->encoding = AUDIO_ENCODING_SLINEAR_LE; 1178 fp->precision = 16; 1179 fp->flags = 0; 1180 return 0; 1181 case 5: 1182 strcpy(fp->name, AudioEulinear_le); 1183 fp->encoding = AUDIO_ENCODING_ULINEAR_LE; 1184 fp->precision = 16; 1185 fp->flags = 0; 1186 return 0; 1187 case 6: 1188 strcpy(fp->name, AudioEslinear_be); 1189 fp->encoding = AUDIO_ENCODING_SLINEAR_BE; 1190 fp->precision = 16; 1191 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 1192 return 0; 1193 case 7: 1194 strcpy(fp->name, AudioEulinear_be); 1195 fp->encoding = AUDIO_ENCODING_ULINEAR_BE; 1196 fp->precision = 16; 1197 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 1198 return 0; 1199 default: 1200 return EINVAL; 1201 } 1202 return 0; 1203 } 1204 1205 int 1206 ess_set_params( 1207 void *addr, 1208 int setmode, int usemode, 1209 audio_params_t *play, audio_params_t *rec, 1210 stream_filter_list_t *pfil, stream_filter_list_t *rfil) 1211 { 1212 struct ess_softc *sc; 1213 int rate; 1214 1215 DPRINTF(("ess_set_params: set=%d use=%d\n", setmode, usemode)); 1216 sc = addr; 1217 /* 1218 * The ES1887 manual (page 39, `Full-Duplex DMA Mode') claims that in 1219 * full-duplex operation the sample rates must be the same for both 1220 * channels. This appears to be false; the only bit in common is the 1221 * clock source selection. However, we'll be conservative here. 1222 * - mycroft 1223 */ 1224 if (play->sample_rate != rec->sample_rate && 1225 usemode == (AUMODE_PLAY | AUMODE_RECORD)) { 1226 if (setmode == AUMODE_PLAY) { 1227 rec->sample_rate = play->sample_rate; 1228 setmode |= AUMODE_RECORD; 1229 } else if (setmode == AUMODE_RECORD) { 1230 play->sample_rate = rec->sample_rate; 1231 setmode |= AUMODE_PLAY; 1232 } else 1233 return EINVAL; 1234 } 1235 1236 if (setmode & AUMODE_RECORD) { 1237 if (auconv_set_converter(ess_formats, ESS_NFORMATS, 1238 AUMODE_RECORD, rec, FALSE, rfil) < 0) 1239 return EINVAL; 1240 } 1241 if (setmode & AUMODE_PLAY) { 1242 if (auconv_set_converter(ess_formats, ESS_NFORMATS, 1243 AUMODE_PLAY, play, FALSE, pfil) < 0) 1244 return EINVAL; 1245 } 1246 1247 if (usemode == AUMODE_RECORD) 1248 rate = rec->sample_rate; 1249 else 1250 rate = play->sample_rate; 1251 1252 ess_write_x_reg(sc, ESS_XCMD_SAMPLE_RATE, ess_srtotc(rate)); 1253 ess_write_x_reg(sc, ESS_XCMD_FILTER_CLOCK, ess_srtofc(rate)); 1254 1255 if (!ESS_USE_AUDIO1(sc->sc_model)) { 1256 ess_write_mix_reg(sc, ESS_MREG_SAMPLE_RATE, ess_srtotc(rate)); 1257 ess_write_mix_reg(sc, ESS_MREG_FILTER_CLOCK, ess_srtofc(rate)); 1258 } 1259 1260 return 0; 1261 } 1262 1263 int 1264 ess_audio1_trigger_output( 1265 void *addr, 1266 void *start, void *end, 1267 int blksize, 1268 void (*intr)(void *), 1269 void *arg, 1270 const audio_params_t *param) 1271 { 1272 struct ess_softc *sc; 1273 u_int8_t reg; 1274 1275 sc = addr; 1276 DPRINTFN(1, ("ess_audio1_trigger_output: sc=%p start=%p end=%p " 1277 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 1278 1279 if (sc->sc_audio1.active) 1280 panic("ess_audio1_trigger_output: already running"); 1281 1282 sc->sc_audio1.active = 1; 1283 sc->sc_audio1.intr = intr; 1284 sc->sc_audio1.arg = arg; 1285 if (sc->sc_audio1.polled) { 1286 sc->sc_audio1.dmapos = 0; 1287 sc->sc_audio1.buffersize = (char *)end - (char *)start; 1288 sc->sc_audio1.dmacount = 0; 1289 sc->sc_audio1.blksize = blksize; 1290 callout_reset(&sc->sc_poll1_ch, hz / 30, 1291 ess_audio1_poll, sc); 1292 } 1293 1294 reg = ess_read_x_reg(sc, ESS_XCMD_AUDIO_CTRL); 1295 if (param->channels == 2) { 1296 reg &= ~ESS_AUDIO_CTRL_MONO; 1297 reg |= ESS_AUDIO_CTRL_STEREO; 1298 } else { 1299 reg |= ESS_AUDIO_CTRL_MONO; 1300 reg &= ~ESS_AUDIO_CTRL_STEREO; 1301 } 1302 ess_write_x_reg(sc, ESS_XCMD_AUDIO_CTRL, reg); 1303 1304 reg = ess_read_x_reg(sc, ESS_XCMD_AUDIO1_CTRL1); 1305 if (param->precision == 16) 1306 reg |= ESS_AUDIO1_CTRL1_FIFO_SIZE; 1307 else 1308 reg &= ~ESS_AUDIO1_CTRL1_FIFO_SIZE; 1309 if (param->channels == 2) 1310 reg |= ESS_AUDIO1_CTRL1_FIFO_STEREO; 1311 else 1312 reg &= ~ESS_AUDIO1_CTRL1_FIFO_STEREO; 1313 if (param->encoding == AUDIO_ENCODING_SLINEAR_BE || 1314 param->encoding == AUDIO_ENCODING_SLINEAR_LE) 1315 reg |= ESS_AUDIO1_CTRL1_FIFO_SIGNED; 1316 else 1317 reg &= ~ESS_AUDIO1_CTRL1_FIFO_SIGNED; 1318 reg |= ESS_AUDIO1_CTRL1_FIFO_CONNECT; 1319 ess_write_x_reg(sc, ESS_XCMD_AUDIO1_CTRL1, reg); 1320 1321 isa_dmastart(sc->sc_ic, sc->sc_audio1.drq, start, 1322 (char *)end - (char *)start, NULL, 1323 DMAMODE_WRITE | DMAMODE_LOOPDEMAND, BUS_DMA_NOWAIT); 1324 1325 /* Program transfer count registers with 2's complement of count. */ 1326 blksize = -blksize; 1327 ess_write_x_reg(sc, ESS_XCMD_XFER_COUNTLO, blksize); 1328 ess_write_x_reg(sc, ESS_XCMD_XFER_COUNTHI, blksize >> 8); 1329 1330 /* Use 4 bytes per output DMA. */ 1331 ess_set_xreg_bits(sc, ESS_XCMD_DEMAND_CTRL, ESS_DEMAND_CTRL_DEMAND_4); 1332 1333 /* Start auto-init DMA */ 1334 ess_wdsp(sc, ESS_ACMD_ENABLE_SPKR); 1335 reg = ess_read_x_reg(sc, ESS_XCMD_AUDIO1_CTRL2); 1336 reg &= ~(ESS_AUDIO1_CTRL2_DMA_READ | ESS_AUDIO1_CTRL2_ADC_ENABLE); 1337 reg |= ESS_AUDIO1_CTRL2_FIFO_ENABLE | ESS_AUDIO1_CTRL2_AUTO_INIT; 1338 ess_write_x_reg(sc, ESS_XCMD_AUDIO1_CTRL2, reg); 1339 1340 return 0; 1341 } 1342 1343 int 1344 ess_audio2_trigger_output( 1345 void *addr, 1346 void *start, void *end, 1347 int blksize, 1348 void (*intr)(void *), 1349 void *arg, 1350 const audio_params_t *param) 1351 { 1352 struct ess_softc *sc; 1353 u_int8_t reg; 1354 1355 sc = addr; 1356 DPRINTFN(1, ("ess_audio2_trigger_output: sc=%p start=%p end=%p " 1357 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 1358 1359 if (sc->sc_audio2.active) 1360 panic("ess_audio2_trigger_output: already running"); 1361 1362 sc->sc_audio2.active = 1; 1363 sc->sc_audio2.intr = intr; 1364 sc->sc_audio2.arg = arg; 1365 if (sc->sc_audio2.polled) { 1366 sc->sc_audio2.dmapos = 0; 1367 sc->sc_audio2.buffersize = (char *)end - (char *)start; 1368 sc->sc_audio2.dmacount = 0; 1369 sc->sc_audio2.blksize = blksize; 1370 callout_reset(&sc->sc_poll2_ch, hz / 30, 1371 ess_audio2_poll, sc); 1372 } 1373 1374 reg = ess_read_mix_reg(sc, ESS_MREG_AUDIO2_CTRL2); 1375 if (param->precision == 16) 1376 reg |= ESS_AUDIO2_CTRL2_FIFO_SIZE; 1377 else 1378 reg &= ~ESS_AUDIO2_CTRL2_FIFO_SIZE; 1379 if (param->channels == 2) 1380 reg |= ESS_AUDIO2_CTRL2_CHANNELS; 1381 else 1382 reg &= ~ESS_AUDIO2_CTRL2_CHANNELS; 1383 if (param->encoding == AUDIO_ENCODING_SLINEAR_BE || 1384 param->encoding == AUDIO_ENCODING_SLINEAR_LE) 1385 reg |= ESS_AUDIO2_CTRL2_FIFO_SIGNED; 1386 else 1387 reg &= ~ESS_AUDIO2_CTRL2_FIFO_SIGNED; 1388 ess_write_mix_reg(sc, ESS_MREG_AUDIO2_CTRL2, reg); 1389 1390 isa_dmastart(sc->sc_ic, sc->sc_audio2.drq, start, 1391 (char *)end - (char *)start, NULL, 1392 DMAMODE_WRITE | DMAMODE_LOOPDEMAND, BUS_DMA_NOWAIT); 1393 1394 if (IS16BITDRQ(sc->sc_audio2.drq)) 1395 blksize >>= 1; /* use word count for 16 bit DMA */ 1396 /* Program transfer count registers with 2's complement of count. */ 1397 blksize = -blksize; 1398 ess_write_mix_reg(sc, ESS_MREG_XFER_COUNTLO, blksize); 1399 ess_write_mix_reg(sc, ESS_MREG_XFER_COUNTHI, blksize >> 8); 1400 1401 reg = ess_read_mix_reg(sc, ESS_MREG_AUDIO2_CTRL1); 1402 if (IS16BITDRQ(sc->sc_audio2.drq)) 1403 reg |= ESS_AUDIO2_CTRL1_XFER_SIZE; 1404 else 1405 reg &= ~ESS_AUDIO2_CTRL1_XFER_SIZE; 1406 reg |= ESS_AUDIO2_CTRL1_DEMAND_8; 1407 reg |= ESS_AUDIO2_CTRL1_DAC_ENABLE | ESS_AUDIO2_CTRL1_FIFO_ENABLE | 1408 ESS_AUDIO2_CTRL1_AUTO_INIT; 1409 ess_write_mix_reg(sc, ESS_MREG_AUDIO2_CTRL1, reg); 1410 1411 return (0); 1412 } 1413 1414 int 1415 ess_audio1_trigger_input( 1416 void *addr, 1417 void *start, void *end, 1418 int blksize, 1419 void (*intr)(void *), 1420 void *arg, 1421 const audio_params_t *param) 1422 { 1423 struct ess_softc *sc; 1424 u_int8_t reg; 1425 1426 sc = addr; 1427 DPRINTFN(1, ("ess_audio1_trigger_input: sc=%p start=%p end=%p " 1428 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 1429 1430 if (sc->sc_audio1.active) 1431 panic("ess_audio1_trigger_input: already running"); 1432 1433 sc->sc_audio1.active = 1; 1434 sc->sc_audio1.intr = intr; 1435 sc->sc_audio1.arg = arg; 1436 if (sc->sc_audio1.polled) { 1437 sc->sc_audio1.dmapos = 0; 1438 sc->sc_audio1.buffersize = (char *)end - (char *)start; 1439 sc->sc_audio1.dmacount = 0; 1440 sc->sc_audio1.blksize = blksize; 1441 callout_reset(&sc->sc_poll1_ch, hz / 30, 1442 ess_audio1_poll, sc); 1443 } 1444 1445 reg = ess_read_x_reg(sc, ESS_XCMD_AUDIO_CTRL); 1446 if (param->channels == 2) { 1447 reg &= ~ESS_AUDIO_CTRL_MONO; 1448 reg |= ESS_AUDIO_CTRL_STEREO; 1449 } else { 1450 reg |= ESS_AUDIO_CTRL_MONO; 1451 reg &= ~ESS_AUDIO_CTRL_STEREO; 1452 } 1453 ess_write_x_reg(sc, ESS_XCMD_AUDIO_CTRL, reg); 1454 1455 reg = ess_read_x_reg(sc, ESS_XCMD_AUDIO1_CTRL1); 1456 if (param->precision == 16) 1457 reg |= ESS_AUDIO1_CTRL1_FIFO_SIZE; 1458 else 1459 reg &= ~ESS_AUDIO1_CTRL1_FIFO_SIZE; 1460 if (param->channels == 2) 1461 reg |= ESS_AUDIO1_CTRL1_FIFO_STEREO; 1462 else 1463 reg &= ~ESS_AUDIO1_CTRL1_FIFO_STEREO; 1464 if (param->encoding == AUDIO_ENCODING_SLINEAR_BE || 1465 param->encoding == AUDIO_ENCODING_SLINEAR_LE) 1466 reg |= ESS_AUDIO1_CTRL1_FIFO_SIGNED; 1467 else 1468 reg &= ~ESS_AUDIO1_CTRL1_FIFO_SIGNED; 1469 reg |= ESS_AUDIO1_CTRL1_FIFO_CONNECT; 1470 ess_write_x_reg(sc, ESS_XCMD_AUDIO1_CTRL1, reg); 1471 1472 isa_dmastart(sc->sc_ic, sc->sc_audio1.drq, start, 1473 (char *)end - (char *)start, NULL, 1474 DMAMODE_READ | DMAMODE_LOOPDEMAND, BUS_DMA_NOWAIT); 1475 1476 /* Program transfer count registers with 2's complement of count. */ 1477 blksize = -blksize; 1478 ess_write_x_reg(sc, ESS_XCMD_XFER_COUNTLO, blksize); 1479 ess_write_x_reg(sc, ESS_XCMD_XFER_COUNTHI, blksize >> 8); 1480 1481 /* Use 4 bytes per input DMA. */ 1482 ess_set_xreg_bits(sc, ESS_XCMD_DEMAND_CTRL, ESS_DEMAND_CTRL_DEMAND_4); 1483 1484 /* Start auto-init DMA */ 1485 ess_wdsp(sc, ESS_ACMD_DISABLE_SPKR); 1486 reg = ess_read_x_reg(sc, ESS_XCMD_AUDIO1_CTRL2); 1487 reg |= ESS_AUDIO1_CTRL2_DMA_READ | ESS_AUDIO1_CTRL2_ADC_ENABLE; 1488 reg |= ESS_AUDIO1_CTRL2_FIFO_ENABLE | ESS_AUDIO1_CTRL2_AUTO_INIT; 1489 ess_write_x_reg(sc, ESS_XCMD_AUDIO1_CTRL2, reg); 1490 1491 return 0; 1492 } 1493 1494 int 1495 ess_audio1_halt(void *addr) 1496 { 1497 struct ess_softc *sc; 1498 1499 sc = addr; 1500 DPRINTF(("ess_audio1_halt: sc=%p\n", sc)); 1501 1502 if (sc->sc_audio1.active) { 1503 ess_clear_xreg_bits(sc, ESS_XCMD_AUDIO1_CTRL2, 1504 ESS_AUDIO1_CTRL2_FIFO_ENABLE); 1505 isa_dmaabort(sc->sc_ic, sc->sc_audio1.drq); 1506 if (sc->sc_audio1.polled) 1507 callout_stop(&sc->sc_poll1_ch); 1508 sc->sc_audio1.active = 0; 1509 } 1510 1511 return 0; 1512 } 1513 1514 int 1515 ess_audio2_halt(void *addr) 1516 { 1517 struct ess_softc *sc; 1518 1519 sc = addr; 1520 DPRINTF(("ess_audio2_halt: sc=%p\n", sc)); 1521 1522 if (sc->sc_audio2.active) { 1523 ess_clear_mreg_bits(sc, ESS_MREG_AUDIO2_CTRL1, 1524 ESS_AUDIO2_CTRL1_DAC_ENABLE | 1525 ESS_AUDIO2_CTRL1_FIFO_ENABLE); 1526 isa_dmaabort(sc->sc_ic, sc->sc_audio2.drq); 1527 if (sc->sc_audio2.polled) 1528 callout_stop(&sc->sc_poll2_ch); 1529 sc->sc_audio2.active = 0; 1530 } 1531 1532 return 0; 1533 } 1534 1535 int 1536 ess_audio1_intr(void *arg) 1537 { 1538 struct ess_softc *sc; 1539 uint8_t reg; 1540 int rv; 1541 1542 sc = arg; 1543 DPRINTFN(1,("ess_audio1_intr: intr=%p\n", sc->sc_audio1.intr)); 1544 1545 mutex_spin_enter(&sc->sc_intr_lock); 1546 1547 /* Check and clear interrupt on Audio1. */ 1548 reg = EREAD1(sc->sc_iot, sc->sc_ioh, ESS_DSP_RW_STATUS); 1549 if ((reg & ESS_DSP_READ_OFLOW) == 0) { 1550 mutex_spin_exit(&sc->sc_intr_lock); 1551 return 0; 1552 } 1553 reg = EREAD1(sc->sc_iot, sc->sc_ioh, ESS_CLEAR_INTR); 1554 1555 sc->sc_audio1.nintr++; 1556 1557 if (sc->sc_audio1.active) { 1558 (*sc->sc_audio1.intr)(sc->sc_audio1.arg); 1559 rv = 1; 1560 } else 1561 rv = 0; 1562 1563 mutex_spin_exit(&sc->sc_intr_lock); 1564 1565 return rv; 1566 } 1567 1568 int 1569 ess_audio2_intr(void *arg) 1570 { 1571 struct ess_softc *sc; 1572 uint8_t reg; 1573 int rv; 1574 1575 sc = arg; 1576 DPRINTFN(1,("ess_audio2_intr: intr=%p\n", sc->sc_audio2.intr)); 1577 1578 mutex_spin_enter(&sc->sc_intr_lock); 1579 1580 /* Check and clear interrupt on Audio2. */ 1581 reg = ess_read_mix_reg(sc, ESS_MREG_AUDIO2_CTRL2); 1582 if ((reg & ESS_AUDIO2_CTRL2_IRQ_LATCH) == 0) { 1583 mutex_spin_exit(&sc->sc_intr_lock); 1584 return 0; 1585 } 1586 reg &= ~ESS_AUDIO2_CTRL2_IRQ_LATCH; 1587 ess_write_mix_reg(sc, ESS_MREG_AUDIO2_CTRL2, reg); 1588 1589 sc->sc_audio2.nintr++; 1590 1591 if (sc->sc_audio2.active) { 1592 (*sc->sc_audio2.intr)(sc->sc_audio2.arg); 1593 rv = 1; 1594 } else 1595 rv = 0; 1596 1597 mutex_spin_exit(&sc->sc_intr_lock); 1598 1599 return rv; 1600 } 1601 1602 void 1603 ess_audio1_poll(void *addr) 1604 { 1605 struct ess_softc *sc; 1606 int dmapos, dmacount; 1607 1608 sc = addr; 1609 mutex_spin_enter(&sc->sc_intr_lock); 1610 1611 if (!sc->sc_audio1.active) { 1612 mutex_spin_exit(&sc->sc_intr_lock); 1613 return; 1614 } 1615 1616 sc->sc_audio1.nintr++; 1617 1618 dmapos = isa_dmacount(sc->sc_ic, sc->sc_audio1.drq); 1619 dmacount = sc->sc_audio1.dmapos - dmapos; 1620 if (dmacount < 0) 1621 dmacount += sc->sc_audio1.buffersize; 1622 sc->sc_audio1.dmapos = dmapos; 1623 #if 1 1624 dmacount += sc->sc_audio1.dmacount; 1625 while (dmacount > sc->sc_audio1.blksize) { 1626 dmacount -= sc->sc_audio1.blksize; 1627 (*sc->sc_audio1.intr)(sc->sc_audio1.arg); 1628 } 1629 sc->sc_audio1.dmacount = dmacount; 1630 #else 1631 (*sc->sc_audio1.intr)(sc->sc_audio1.arg, dmacount); 1632 #endif 1633 1634 mutex_spin_exit(&sc->sc_intr_lock); 1635 callout_reset(&sc->sc_poll1_ch, hz / 30, ess_audio1_poll, sc); 1636 } 1637 1638 void 1639 ess_audio2_poll(void *addr) 1640 { 1641 struct ess_softc *sc; 1642 int dmapos, dmacount; 1643 1644 sc = addr; 1645 mutex_spin_enter(&sc->sc_intr_lock); 1646 1647 if (!sc->sc_audio2.active) { 1648 mutex_spin_exit(&sc->sc_intr_lock); 1649 return; 1650 } 1651 1652 sc->sc_audio2.nintr++; 1653 1654 dmapos = isa_dmacount(sc->sc_ic, sc->sc_audio2.drq); 1655 dmacount = sc->sc_audio2.dmapos - dmapos; 1656 if (dmacount < 0) 1657 dmacount += sc->sc_audio2.buffersize; 1658 sc->sc_audio2.dmapos = dmapos; 1659 #if 1 1660 dmacount += sc->sc_audio2.dmacount; 1661 while (dmacount > sc->sc_audio2.blksize) { 1662 dmacount -= sc->sc_audio2.blksize; 1663 (*sc->sc_audio2.intr)(sc->sc_audio2.arg); 1664 } 1665 sc->sc_audio2.dmacount = dmacount; 1666 #else 1667 (*sc->sc_audio2.intr)(sc->sc_audio2.arg, dmacount); 1668 #endif 1669 1670 mutex_spin_exit(&sc->sc_intr_lock); 1671 callout_reset(&sc->sc_poll2_ch, hz / 30, ess_audio2_poll, sc); 1672 } 1673 1674 int 1675 ess_round_blocksize(void *addr, int blk, int mode, 1676 const audio_params_t *param) 1677 { 1678 1679 return blk & -8; /* round for max DMA size */ 1680 } 1681 1682 int 1683 ess_set_port(void *addr, mixer_ctrl_t *cp) 1684 { 1685 struct ess_softc *sc; 1686 int lgain, rgain; 1687 1688 sc = addr; 1689 DPRINTFN(5,("ess_set_port: port=%d num_channels=%d\n", 1690 cp->dev, cp->un.value.num_channels)); 1691 1692 switch (cp->dev) { 1693 /* 1694 * The following mixer ports are all stereo. If we get a 1695 * single-channel gain value passed in, then we duplicate it 1696 * to both left and right channels. 1697 */ 1698 case ESS_MASTER_VOL: 1699 case ESS_DAC_PLAY_VOL: 1700 case ESS_MIC_PLAY_VOL: 1701 case ESS_LINE_PLAY_VOL: 1702 case ESS_SYNTH_PLAY_VOL: 1703 case ESS_CD_PLAY_VOL: 1704 case ESS_AUXB_PLAY_VOL: 1705 case ESS_RECORD_VOL: 1706 if (cp->type != AUDIO_MIXER_VALUE) 1707 return EINVAL; 1708 1709 switch (cp->un.value.num_channels) { 1710 case 1: 1711 lgain = rgain = ESS_4BIT_GAIN( 1712 cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]); 1713 break; 1714 case 2: 1715 lgain = ESS_4BIT_GAIN( 1716 cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT]); 1717 rgain = ESS_4BIT_GAIN( 1718 cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT]); 1719 break; 1720 default: 1721 return EINVAL; 1722 } 1723 1724 sc->gain[cp->dev][ESS_LEFT] = lgain; 1725 sc->gain[cp->dev][ESS_RIGHT] = rgain; 1726 ess_set_gain(sc, cp->dev, 1); 1727 return 0; 1728 1729 /* 1730 * The PC speaker port is mono. If we get a stereo gain value 1731 * passed in, then we return EINVAL. 1732 */ 1733 case ESS_PCSPEAKER_VOL: 1734 if (cp->un.value.num_channels != 1) 1735 return EINVAL; 1736 1737 sc->gain[cp->dev][ESS_LEFT] = sc->gain[cp->dev][ESS_RIGHT] = 1738 ESS_3BIT_GAIN(cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]); 1739 ess_set_gain(sc, cp->dev, 1); 1740 return 0; 1741 1742 case ESS_RECORD_SOURCE: 1743 if (ESS_USE_AUDIO1(sc->sc_model)) { 1744 if (cp->type == AUDIO_MIXER_ENUM) 1745 return ess_set_in_port(sc, cp->un.ord); 1746 else 1747 return EINVAL; 1748 } else { 1749 if (cp->type == AUDIO_MIXER_SET) 1750 return ess_set_in_ports(sc, cp->un.mask); 1751 else 1752 return EINVAL; 1753 } 1754 return 0; 1755 1756 case ESS_RECORD_MONITOR: 1757 if (cp->type != AUDIO_MIXER_ENUM) 1758 return EINVAL; 1759 1760 if (cp->un.ord) 1761 /* Enable monitor */ 1762 ess_set_xreg_bits(sc, ESS_XCMD_AUDIO_CTRL, 1763 ESS_AUDIO_CTRL_MONITOR); 1764 else 1765 /* Disable monitor */ 1766 ess_clear_xreg_bits(sc, ESS_XCMD_AUDIO_CTRL, 1767 ESS_AUDIO_CTRL_MONITOR); 1768 return 0; 1769 } 1770 1771 if (ESS_USE_AUDIO1(sc->sc_model)) 1772 return EINVAL; 1773 1774 switch (cp->dev) { 1775 case ESS_DAC_REC_VOL: 1776 case ESS_MIC_REC_VOL: 1777 case ESS_LINE_REC_VOL: 1778 case ESS_SYNTH_REC_VOL: 1779 case ESS_CD_REC_VOL: 1780 case ESS_AUXB_REC_VOL: 1781 if (cp->type != AUDIO_MIXER_VALUE) 1782 return EINVAL; 1783 1784 switch (cp->un.value.num_channels) { 1785 case 1: 1786 lgain = rgain = ESS_4BIT_GAIN( 1787 cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]); 1788 break; 1789 case 2: 1790 lgain = ESS_4BIT_GAIN( 1791 cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT]); 1792 rgain = ESS_4BIT_GAIN( 1793 cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT]); 1794 break; 1795 default: 1796 return EINVAL; 1797 } 1798 1799 sc->gain[cp->dev][ESS_LEFT] = lgain; 1800 sc->gain[cp->dev][ESS_RIGHT] = rgain; 1801 ess_set_gain(sc, cp->dev, 1); 1802 return 0; 1803 1804 case ESS_MIC_PREAMP: 1805 if (cp->type != AUDIO_MIXER_ENUM) 1806 return EINVAL; 1807 1808 if (cp->un.ord) 1809 /* Enable microphone preamp */ 1810 ess_set_xreg_bits(sc, ESS_XCMD_PREAMP_CTRL, 1811 ESS_PREAMP_CTRL_ENABLE); 1812 else 1813 /* Disable microphone preamp */ 1814 ess_clear_xreg_bits(sc, ESS_XCMD_PREAMP_CTRL, 1815 ESS_PREAMP_CTRL_ENABLE); 1816 return 0; 1817 } 1818 1819 return EINVAL; 1820 } 1821 1822 int 1823 ess_get_port(void *addr, mixer_ctrl_t *cp) 1824 { 1825 struct ess_softc *sc; 1826 1827 sc = addr; 1828 DPRINTFN(5,("ess_get_port: port=%d\n", cp->dev)); 1829 1830 switch (cp->dev) { 1831 case ESS_MASTER_VOL: 1832 case ESS_DAC_PLAY_VOL: 1833 case ESS_MIC_PLAY_VOL: 1834 case ESS_LINE_PLAY_VOL: 1835 case ESS_SYNTH_PLAY_VOL: 1836 case ESS_CD_PLAY_VOL: 1837 case ESS_AUXB_PLAY_VOL: 1838 case ESS_RECORD_VOL: 1839 switch (cp->un.value.num_channels) { 1840 case 1: 1841 cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] = 1842 sc->gain[cp->dev][ESS_LEFT]; 1843 break; 1844 case 2: 1845 cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT] = 1846 sc->gain[cp->dev][ESS_LEFT]; 1847 cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] = 1848 sc->gain[cp->dev][ESS_RIGHT]; 1849 break; 1850 default: 1851 return EINVAL; 1852 } 1853 return 0; 1854 1855 case ESS_PCSPEAKER_VOL: 1856 if (cp->un.value.num_channels != 1) 1857 return EINVAL; 1858 1859 cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] = 1860 sc->gain[cp->dev][ESS_LEFT]; 1861 return 0; 1862 1863 case ESS_RECORD_SOURCE: 1864 if (ESS_USE_AUDIO1(sc->sc_model)) 1865 cp->un.ord = sc->in_port; 1866 else 1867 cp->un.mask = sc->in_mask; 1868 return 0; 1869 1870 case ESS_RECORD_MONITOR: 1871 cp->un.ord = (ess_read_x_reg(sc, ESS_XCMD_AUDIO_CTRL) & 1872 ESS_AUDIO_CTRL_MONITOR) ? 1 : 0; 1873 return 0; 1874 } 1875 1876 if (ESS_USE_AUDIO1(sc->sc_model)) 1877 return EINVAL; 1878 1879 switch (cp->dev) { 1880 case ESS_DAC_REC_VOL: 1881 case ESS_MIC_REC_VOL: 1882 case ESS_LINE_REC_VOL: 1883 case ESS_SYNTH_REC_VOL: 1884 case ESS_CD_REC_VOL: 1885 case ESS_AUXB_REC_VOL: 1886 switch (cp->un.value.num_channels) { 1887 case 1: 1888 cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] = 1889 sc->gain[cp->dev][ESS_LEFT]; 1890 break; 1891 case 2: 1892 cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT] = 1893 sc->gain[cp->dev][ESS_LEFT]; 1894 cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] = 1895 sc->gain[cp->dev][ESS_RIGHT]; 1896 break; 1897 default: 1898 return EINVAL; 1899 } 1900 return 0; 1901 1902 case ESS_MIC_PREAMP: 1903 cp->un.ord = (ess_read_x_reg(sc, ESS_XCMD_PREAMP_CTRL) & 1904 ESS_PREAMP_CTRL_ENABLE) ? 1 : 0; 1905 return 0; 1906 } 1907 1908 return EINVAL; 1909 } 1910 1911 int 1912 ess_query_devinfo(void *addr, mixer_devinfo_t *dip) 1913 { 1914 struct ess_softc *sc; 1915 1916 sc = addr; 1917 DPRINTFN(5,("ess_query_devinfo: model=%d index=%d\n", 1918 sc->sc_model, dip->index)); 1919 1920 /* 1921 * REVISIT: There are some slight differences between the 1922 * mixers on the different ESS chips, which can 1923 * be sorted out using the chip model rather than a 1924 * separate mixer model. 1925 * This is currently coded assuming an ES1887; we 1926 * need to work out which bits are not applicable to 1927 * the other models (1888 and 888). 1928 */ 1929 switch (dip->index) { 1930 case ESS_DAC_PLAY_VOL: 1931 dip->mixer_class = ESS_INPUT_CLASS; 1932 dip->next = dip->prev = AUDIO_MIXER_LAST; 1933 strcpy(dip->label.name, AudioNdac); 1934 dip->type = AUDIO_MIXER_VALUE; 1935 dip->un.v.num_channels = 2; 1936 strcpy(dip->un.v.units.name, AudioNvolume); 1937 return 0; 1938 1939 case ESS_MIC_PLAY_VOL: 1940 dip->mixer_class = ESS_INPUT_CLASS; 1941 dip->prev = AUDIO_MIXER_LAST; 1942 if (ESS_USE_AUDIO1(sc->sc_model)) 1943 dip->next = AUDIO_MIXER_LAST; 1944 else 1945 dip->next = ESS_MIC_PREAMP; 1946 strcpy(dip->label.name, AudioNmicrophone); 1947 dip->type = AUDIO_MIXER_VALUE; 1948 dip->un.v.num_channels = 2; 1949 strcpy(dip->un.v.units.name, AudioNvolume); 1950 return 0; 1951 1952 case ESS_LINE_PLAY_VOL: 1953 dip->mixer_class = ESS_INPUT_CLASS; 1954 dip->next = dip->prev = AUDIO_MIXER_LAST; 1955 strcpy(dip->label.name, AudioNline); 1956 dip->type = AUDIO_MIXER_VALUE; 1957 dip->un.v.num_channels = 2; 1958 strcpy(dip->un.v.units.name, AudioNvolume); 1959 return 0; 1960 1961 case ESS_SYNTH_PLAY_VOL: 1962 dip->mixer_class = ESS_INPUT_CLASS; 1963 dip->next = dip->prev = AUDIO_MIXER_LAST; 1964 strcpy(dip->label.name, AudioNfmsynth); 1965 dip->type = AUDIO_MIXER_VALUE; 1966 dip->un.v.num_channels = 2; 1967 strcpy(dip->un.v.units.name, AudioNvolume); 1968 return 0; 1969 1970 case ESS_CD_PLAY_VOL: 1971 dip->mixer_class = ESS_INPUT_CLASS; 1972 dip->next = dip->prev = AUDIO_MIXER_LAST; 1973 strcpy(dip->label.name, AudioNcd); 1974 dip->type = AUDIO_MIXER_VALUE; 1975 dip->un.v.num_channels = 2; 1976 strcpy(dip->un.v.units.name, AudioNvolume); 1977 return 0; 1978 1979 case ESS_AUXB_PLAY_VOL: 1980 dip->mixer_class = ESS_INPUT_CLASS; 1981 dip->next = dip->prev = AUDIO_MIXER_LAST; 1982 strcpy(dip->label.name, "auxb"); 1983 dip->type = AUDIO_MIXER_VALUE; 1984 dip->un.v.num_channels = 2; 1985 strcpy(dip->un.v.units.name, AudioNvolume); 1986 return 0; 1987 1988 case ESS_INPUT_CLASS: 1989 dip->mixer_class = ESS_INPUT_CLASS; 1990 dip->next = dip->prev = AUDIO_MIXER_LAST; 1991 strcpy(dip->label.name, AudioCinputs); 1992 dip->type = AUDIO_MIXER_CLASS; 1993 return 0; 1994 1995 case ESS_MASTER_VOL: 1996 dip->mixer_class = ESS_OUTPUT_CLASS; 1997 dip->next = dip->prev = AUDIO_MIXER_LAST; 1998 strcpy(dip->label.name, AudioNmaster); 1999 dip->type = AUDIO_MIXER_VALUE; 2000 dip->un.v.num_channels = 2; 2001 strcpy(dip->un.v.units.name, AudioNvolume); 2002 return 0; 2003 2004 case ESS_PCSPEAKER_VOL: 2005 dip->mixer_class = ESS_OUTPUT_CLASS; 2006 dip->next = dip->prev = AUDIO_MIXER_LAST; 2007 strcpy(dip->label.name, "pc_speaker"); 2008 dip->type = AUDIO_MIXER_VALUE; 2009 dip->un.v.num_channels = 1; 2010 strcpy(dip->un.v.units.name, AudioNvolume); 2011 return 0; 2012 2013 case ESS_OUTPUT_CLASS: 2014 dip->mixer_class = ESS_OUTPUT_CLASS; 2015 dip->next = dip->prev = AUDIO_MIXER_LAST; 2016 strcpy(dip->label.name, AudioCoutputs); 2017 dip->type = AUDIO_MIXER_CLASS; 2018 return 0; 2019 2020 case ESS_RECORD_VOL: 2021 dip->mixer_class = ESS_RECORD_CLASS; 2022 dip->next = dip->prev = AUDIO_MIXER_LAST; 2023 strcpy(dip->label.name, AudioNrecord); 2024 dip->type = AUDIO_MIXER_VALUE; 2025 dip->un.v.num_channels = 2; 2026 strcpy(dip->un.v.units.name, AudioNvolume); 2027 return 0; 2028 2029 case ESS_RECORD_SOURCE: 2030 dip->mixer_class = ESS_RECORD_CLASS; 2031 dip->next = dip->prev = AUDIO_MIXER_LAST; 2032 strcpy(dip->label.name, AudioNsource); 2033 if (ESS_USE_AUDIO1(sc->sc_model)) { 2034 /* 2035 * The 1788 doesn't use the input mixer control that 2036 * the 1888 uses, because it's a pain when you only 2037 * have one mixer. 2038 * Perhaps it could be emulated by keeping both sets of 2039 * gain values, and doing a `context switch' of the 2040 * mixer registers when shifting from playing to 2041 * recording. 2042 */ 2043 dip->type = AUDIO_MIXER_ENUM; 2044 dip->un.e.num_mem = 4; 2045 strcpy(dip->un.e.member[0].label.name, AudioNmicrophone); 2046 dip->un.e.member[0].ord = ESS_SOURCE_MIC; 2047 strcpy(dip->un.e.member[1].label.name, AudioNline); 2048 dip->un.e.member[1].ord = ESS_SOURCE_LINE; 2049 strcpy(dip->un.e.member[2].label.name, AudioNcd); 2050 dip->un.e.member[2].ord = ESS_SOURCE_CD; 2051 strcpy(dip->un.e.member[3].label.name, AudioNmixerout); 2052 dip->un.e.member[3].ord = ESS_SOURCE_MIXER; 2053 } else { 2054 dip->type = AUDIO_MIXER_SET; 2055 dip->un.s.num_mem = 6; 2056 strcpy(dip->un.s.member[0].label.name, AudioNdac); 2057 dip->un.s.member[0].mask = 1 << ESS_DAC_REC_VOL; 2058 strcpy(dip->un.s.member[1].label.name, AudioNmicrophone); 2059 dip->un.s.member[1].mask = 1 << ESS_MIC_REC_VOL; 2060 strcpy(dip->un.s.member[2].label.name, AudioNline); 2061 dip->un.s.member[2].mask = 1 << ESS_LINE_REC_VOL; 2062 strcpy(dip->un.s.member[3].label.name, AudioNfmsynth); 2063 dip->un.s.member[3].mask = 1 << ESS_SYNTH_REC_VOL; 2064 strcpy(dip->un.s.member[4].label.name, AudioNcd); 2065 dip->un.s.member[4].mask = 1 << ESS_CD_REC_VOL; 2066 strcpy(dip->un.s.member[5].label.name, "auxb"); 2067 dip->un.s.member[5].mask = 1 << ESS_AUXB_REC_VOL; 2068 } 2069 return 0; 2070 2071 case ESS_RECORD_CLASS: 2072 dip->mixer_class = ESS_RECORD_CLASS; 2073 dip->next = dip->prev = AUDIO_MIXER_LAST; 2074 strcpy(dip->label.name, AudioCrecord); 2075 dip->type = AUDIO_MIXER_CLASS; 2076 return 0; 2077 2078 case ESS_RECORD_MONITOR: 2079 dip->prev = dip->next = AUDIO_MIXER_LAST; 2080 strcpy(dip->label.name, AudioNmute); 2081 dip->type = AUDIO_MIXER_ENUM; 2082 dip->mixer_class = ESS_MONITOR_CLASS; 2083 dip->un.e.num_mem = 2; 2084 strcpy(dip->un.e.member[0].label.name, AudioNoff); 2085 dip->un.e.member[0].ord = 0; 2086 strcpy(dip->un.e.member[1].label.name, AudioNon); 2087 dip->un.e.member[1].ord = 1; 2088 return 0; 2089 2090 case ESS_MONITOR_CLASS: 2091 dip->mixer_class = ESS_MONITOR_CLASS; 2092 dip->next = dip->prev = AUDIO_MIXER_LAST; 2093 strcpy(dip->label.name, AudioCmonitor); 2094 dip->type = AUDIO_MIXER_CLASS; 2095 return 0; 2096 } 2097 2098 if (ESS_USE_AUDIO1(sc->sc_model)) 2099 return ENXIO; 2100 2101 switch (dip->index) { 2102 case ESS_DAC_REC_VOL: 2103 dip->mixer_class = ESS_RECORD_CLASS; 2104 dip->next = dip->prev = AUDIO_MIXER_LAST; 2105 strcpy(dip->label.name, AudioNdac); 2106 dip->type = AUDIO_MIXER_VALUE; 2107 dip->un.v.num_channels = 2; 2108 strcpy(dip->un.v.units.name, AudioNvolume); 2109 return 0; 2110 2111 case ESS_MIC_REC_VOL: 2112 dip->mixer_class = ESS_RECORD_CLASS; 2113 dip->next = dip->prev = AUDIO_MIXER_LAST; 2114 strcpy(dip->label.name, AudioNmicrophone); 2115 dip->type = AUDIO_MIXER_VALUE; 2116 dip->un.v.num_channels = 2; 2117 strcpy(dip->un.v.units.name, AudioNvolume); 2118 return 0; 2119 2120 case ESS_LINE_REC_VOL: 2121 dip->mixer_class = ESS_RECORD_CLASS; 2122 dip->next = dip->prev = AUDIO_MIXER_LAST; 2123 strcpy(dip->label.name, AudioNline); 2124 dip->type = AUDIO_MIXER_VALUE; 2125 dip->un.v.num_channels = 2; 2126 strcpy(dip->un.v.units.name, AudioNvolume); 2127 return 0; 2128 2129 case ESS_SYNTH_REC_VOL: 2130 dip->mixer_class = ESS_RECORD_CLASS; 2131 dip->next = dip->prev = AUDIO_MIXER_LAST; 2132 strcpy(dip->label.name, AudioNfmsynth); 2133 dip->type = AUDIO_MIXER_VALUE; 2134 dip->un.v.num_channels = 2; 2135 strcpy(dip->un.v.units.name, AudioNvolume); 2136 return 0; 2137 2138 case ESS_CD_REC_VOL: 2139 dip->mixer_class = ESS_RECORD_CLASS; 2140 dip->next = dip->prev = AUDIO_MIXER_LAST; 2141 strcpy(dip->label.name, AudioNcd); 2142 dip->type = AUDIO_MIXER_VALUE; 2143 dip->un.v.num_channels = 2; 2144 strcpy(dip->un.v.units.name, AudioNvolume); 2145 return 0; 2146 2147 case ESS_AUXB_REC_VOL: 2148 dip->mixer_class = ESS_RECORD_CLASS; 2149 dip->next = dip->prev = AUDIO_MIXER_LAST; 2150 strcpy(dip->label.name, "auxb"); 2151 dip->type = AUDIO_MIXER_VALUE; 2152 dip->un.v.num_channels = 2; 2153 strcpy(dip->un.v.units.name, AudioNvolume); 2154 return 0; 2155 2156 case ESS_MIC_PREAMP: 2157 dip->mixer_class = ESS_INPUT_CLASS; 2158 dip->prev = ESS_MIC_PLAY_VOL; 2159 dip->next = AUDIO_MIXER_LAST; 2160 strcpy(dip->label.name, AudioNpreamp); 2161 dip->type = AUDIO_MIXER_ENUM; 2162 dip->un.e.num_mem = 2; 2163 strcpy(dip->un.e.member[0].label.name, AudioNoff); 2164 dip->un.e.member[0].ord = 0; 2165 strcpy(dip->un.e.member[1].label.name, AudioNon); 2166 dip->un.e.member[1].ord = 1; 2167 return 0; 2168 } 2169 2170 return ENXIO; 2171 } 2172 2173 void * 2174 ess_malloc(void *addr, int direction, size_t size, 2175 struct malloc_type *pool, int flags) 2176 { 2177 struct ess_softc *sc; 2178 int drq; 2179 2180 sc = addr; 2181 if ((!ESS_USE_AUDIO1(sc->sc_model)) && direction == AUMODE_PLAY) 2182 drq = sc->sc_audio2.drq; 2183 else 2184 drq = sc->sc_audio1.drq; 2185 return (isa_malloc(sc->sc_ic, drq, size, pool, flags)); 2186 } 2187 2188 void 2189 ess_free(void *addr, void *ptr, struct malloc_type *pool) 2190 { 2191 2192 isa_free(ptr, pool); 2193 } 2194 2195 size_t 2196 ess_round_buffersize(void *addr, int direction, size_t size) 2197 { 2198 struct ess_softc *sc; 2199 bus_size_t maxsize; 2200 2201 sc = addr; 2202 if ((!ESS_USE_AUDIO1(sc->sc_model)) && direction == AUMODE_PLAY) 2203 maxsize = sc->sc_audio2.maxsize; 2204 else 2205 maxsize = sc->sc_audio1.maxsize; 2206 2207 if (size > maxsize) 2208 size = maxsize; 2209 return size; 2210 } 2211 2212 paddr_t 2213 ess_mappage(void *addr, void *mem, off_t off, int prot) 2214 { 2215 2216 return isa_mappage(mem, off, prot); 2217 } 2218 2219 int 2220 ess_1788_get_props(void *addr) 2221 { 2222 2223 return AUDIO_PROP_MMAP | AUDIO_PROP_INDEPENDENT; 2224 } 2225 2226 int 2227 ess_1888_get_props(void *addr) 2228 { 2229 2230 return AUDIO_PROP_MMAP | AUDIO_PROP_INDEPENDENT | AUDIO_PROP_FULLDUPLEX; 2231 } 2232 2233 void 2234 ess_get_locks(void *addr, kmutex_t **intr, kmutex_t **proc) 2235 { 2236 struct ess_softc *sc; 2237 2238 sc = addr; 2239 *intr = &sc->sc_intr_lock; 2240 *proc = &sc->sc_lock; 2241 } 2242 2243 2244 /* ============================================ 2245 * Generic functions for ess, not used by audio h/w i/f 2246 * ============================================= 2247 */ 2248 2249 /* 2250 * Reset the chip. 2251 * Return non-zero if the chip isn't detected. 2252 */ 2253 int 2254 ess_reset(struct ess_softc *sc) 2255 { 2256 bus_space_tag_t iot; 2257 bus_space_handle_t ioh; 2258 2259 iot = sc->sc_iot; 2260 ioh = sc->sc_ioh; 2261 sc->sc_audio1.active = 0; 2262 sc->sc_audio2.active = 0; 2263 2264 EWRITE1(iot, ioh, ESS_DSP_RESET, ESS_RESET_EXT); 2265 delay(10000); /* XXX shouldn't delay so long */ 2266 EWRITE1(iot, ioh, ESS_DSP_RESET, 0); 2267 if (ess_rdsp(sc) != ESS_MAGIC) 2268 return 1; 2269 2270 /* Enable access to the ESS extension commands. */ 2271 ess_wdsp(sc, ESS_ACMD_ENABLE_EXT); 2272 2273 return 0; 2274 } 2275 2276 void 2277 ess_set_gain(struct ess_softc *sc, int port, int on) 2278 { 2279 int gain, left, right; 2280 int mix; 2281 int src; 2282 int stereo; 2283 2284 /* 2285 * Most gain controls are found in the mixer registers and 2286 * are stereo. Any that are not, must set mix and stereo as 2287 * required. 2288 */ 2289 mix = 1; 2290 stereo = 1; 2291 2292 switch (port) { 2293 case ESS_MASTER_VOL: 2294 src = ESS_MREG_VOLUME_MASTER; 2295 break; 2296 case ESS_DAC_PLAY_VOL: 2297 if (ESS_USE_AUDIO1(sc->sc_model)) 2298 src = ESS_MREG_VOLUME_VOICE; 2299 else 2300 src = 0x7C; 2301 break; 2302 case ESS_MIC_PLAY_VOL: 2303 src = ESS_MREG_VOLUME_MIC; 2304 break; 2305 case ESS_LINE_PLAY_VOL: 2306 src = ESS_MREG_VOLUME_LINE; 2307 break; 2308 case ESS_SYNTH_PLAY_VOL: 2309 src = ESS_MREG_VOLUME_SYNTH; 2310 break; 2311 case ESS_CD_PLAY_VOL: 2312 src = ESS_MREG_VOLUME_CD; 2313 break; 2314 case ESS_AUXB_PLAY_VOL: 2315 src = ESS_MREG_VOLUME_AUXB; 2316 break; 2317 case ESS_PCSPEAKER_VOL: 2318 src = ESS_MREG_VOLUME_PCSPKR; 2319 stereo = 0; 2320 break; 2321 case ESS_DAC_REC_VOL: 2322 src = 0x69; 2323 break; 2324 case ESS_MIC_REC_VOL: 2325 src = 0x68; 2326 break; 2327 case ESS_LINE_REC_VOL: 2328 src = 0x6E; 2329 break; 2330 case ESS_SYNTH_REC_VOL: 2331 src = 0x6B; 2332 break; 2333 case ESS_CD_REC_VOL: 2334 src = 0x6A; 2335 break; 2336 case ESS_AUXB_REC_VOL: 2337 src = 0x6C; 2338 break; 2339 case ESS_RECORD_VOL: 2340 src = ESS_XCMD_VOLIN_CTRL; 2341 mix = 0; 2342 break; 2343 default: 2344 return; 2345 } 2346 2347 /* 1788 doesn't have a separate recording mixer */ 2348 if (ESS_USE_AUDIO1(sc->sc_model) && mix && src > 0x62) 2349 return; 2350 2351 if (on) { 2352 left = sc->gain[port][ESS_LEFT]; 2353 right = sc->gain[port][ESS_RIGHT]; 2354 } else { 2355 left = right = 0; 2356 } 2357 2358 if (stereo) 2359 gain = ESS_STEREO_GAIN(left, right); 2360 else 2361 gain = ESS_MONO_GAIN(left); 2362 2363 if (mix) 2364 ess_write_mix_reg(sc, src, gain); 2365 else 2366 ess_write_x_reg(sc, src, gain); 2367 } 2368 2369 /* Set the input device on devices without an input mixer. */ 2370 int 2371 ess_set_in_port(struct ess_softc *sc, int ord) 2372 { 2373 mixer_devinfo_t di; 2374 int i; 2375 2376 DPRINTF(("ess_set_in_port: ord=0x%x\n", ord)); 2377 2378 /* 2379 * Get the device info for the record source control, 2380 * including the list of available sources. 2381 */ 2382 di.index = ESS_RECORD_SOURCE; 2383 if (ess_query_devinfo(sc, &di)) 2384 return EINVAL; 2385 2386 /* See if the given ord value was anywhere in the list. */ 2387 for (i = 0; i < di.un.e.num_mem; i++) { 2388 if (ord == di.un.e.member[i].ord) 2389 break; 2390 } 2391 if (i == di.un.e.num_mem) 2392 return EINVAL; 2393 2394 ess_write_mix_reg(sc, ESS_MREG_ADC_SOURCE, ord); 2395 2396 sc->in_port = ord; 2397 return 0; 2398 } 2399 2400 /* Set the input device levels on input-mixer-enabled devices. */ 2401 int 2402 ess_set_in_ports(struct ess_softc *sc, int mask) 2403 { 2404 mixer_devinfo_t di; 2405 int i, port; 2406 2407 DPRINTF(("ess_set_in_ports: mask=0x%x\n", mask)); 2408 2409 /* 2410 * Get the device info for the record source control, 2411 * including the list of available sources. 2412 */ 2413 di.index = ESS_RECORD_SOURCE; 2414 if (ess_query_devinfo(sc, &di)) 2415 return EINVAL; 2416 2417 /* 2418 * Set or disable the record volume control for each of the 2419 * possible sources. 2420 */ 2421 for (i = 0; i < di.un.s.num_mem; i++) { 2422 /* 2423 * Calculate the source port number from its mask. 2424 */ 2425 port = ffs(di.un.s.member[i].mask); 2426 2427 /* 2428 * Set the source gain: 2429 * to the current value if source is enabled 2430 * to zero if source is disabled 2431 */ 2432 ess_set_gain(sc, port, mask & di.un.s.member[i].mask); 2433 } 2434 2435 sc->in_mask = mask; 2436 return 0; 2437 } 2438 2439 void 2440 ess_speaker_on(struct ess_softc *sc) 2441 { 2442 2443 /* Unmute the DAC. */ 2444 ess_set_gain(sc, ESS_DAC_PLAY_VOL, 1); 2445 } 2446 2447 void 2448 ess_speaker_off(struct ess_softc *sc) 2449 { 2450 2451 /* Mute the DAC. */ 2452 ess_set_gain(sc, ESS_DAC_PLAY_VOL, 0); 2453 } 2454 2455 /* 2456 * Calculate the time constant for the requested sampling rate. 2457 */ 2458 u_int 2459 ess_srtotc(u_int rate) 2460 { 2461 u_int tc; 2462 2463 /* The following formulae are from the ESS data sheet. */ 2464 if (rate <= 22050) 2465 tc = 128 - 397700L / rate; 2466 else 2467 tc = 256 - 795500L / rate; 2468 2469 return tc; 2470 } 2471 2472 2473 /* 2474 * Calculate the filter constant for the reuqested sampling rate. 2475 */ 2476 u_int 2477 ess_srtofc(u_int rate) 2478 { 2479 /* 2480 * The following formula is derived from the information in 2481 * the ES1887 data sheet, based on a roll-off frequency of 2482 * 87%. 2483 */ 2484 return 256 - 200279L / rate; 2485 } 2486 2487 2488 /* 2489 * Return the status of the DSP. 2490 */ 2491 u_char 2492 ess_get_dsp_status(struct ess_softc *sc) 2493 { 2494 return EREAD1(sc->sc_iot, sc->sc_ioh, ESS_DSP_RW_STATUS); 2495 } 2496 2497 2498 /* 2499 * Return the read status of the DSP: 1 -> DSP ready for reading 2500 * 0 -> DSP not ready for reading 2501 */ 2502 u_char 2503 ess_dsp_read_ready(struct ess_softc *sc) 2504 { 2505 2506 return (ess_get_dsp_status(sc) & ESS_DSP_READ_READY) ? 1 : 0; 2507 } 2508 2509 2510 /* 2511 * Return the write status of the DSP: 1 -> DSP ready for writing 2512 * 0 -> DSP not ready for writing 2513 */ 2514 u_char 2515 ess_dsp_write_ready(struct ess_softc *sc) 2516 { 2517 return (ess_get_dsp_status(sc) & ESS_DSP_WRITE_BUSY) ? 0 : 1; 2518 } 2519 2520 2521 /* 2522 * Read a byte from the DSP. 2523 */ 2524 int 2525 ess_rdsp(struct ess_softc *sc) 2526 { 2527 bus_space_tag_t iot; 2528 bus_space_handle_t ioh; 2529 int i; 2530 2531 iot = sc->sc_iot; 2532 ioh = sc->sc_ioh; 2533 for (i = ESS_READ_TIMEOUT; i > 0; --i) { 2534 if (ess_dsp_read_ready(sc)) { 2535 i = EREAD1(iot, ioh, ESS_DSP_READ); 2536 DPRINTFN(8,("ess_rdsp() = 0x%02x\n", i)); 2537 return i; 2538 } else 2539 delay(10); 2540 } 2541 2542 DPRINTF(("ess_rdsp: timed out\n")); 2543 return -1; 2544 } 2545 2546 /* 2547 * Write a byte to the DSP. 2548 */ 2549 int 2550 ess_wdsp(struct ess_softc *sc, u_char v) 2551 { 2552 bus_space_tag_t iot; 2553 bus_space_handle_t ioh; 2554 int i; 2555 2556 DPRINTFN(8,("ess_wdsp(0x%02x)\n", v)); 2557 2558 iot = sc->sc_iot; 2559 ioh = sc->sc_ioh; 2560 for (i = ESS_WRITE_TIMEOUT; i > 0; --i) { 2561 if (ess_dsp_write_ready(sc)) { 2562 EWRITE1(iot, ioh, ESS_DSP_WRITE, v); 2563 return 0; 2564 } else 2565 delay(10); 2566 } 2567 2568 DPRINTF(("ess_wdsp(0x%02x): timed out\n", v)); 2569 return -1; 2570 } 2571 2572 /* 2573 * Write a value to one of the ESS extended registers. 2574 */ 2575 int 2576 ess_write_x_reg(struct ess_softc *sc, u_char reg, u_char val) 2577 { 2578 int error; 2579 2580 DPRINTFN(2,("ess_write_x_reg: %02x=%02x\n", reg, val)); 2581 if ((error = ess_wdsp(sc, reg)) == 0) 2582 error = ess_wdsp(sc, val); 2583 2584 return error; 2585 } 2586 2587 /* 2588 * Read the value of one of the ESS extended registers. 2589 */ 2590 u_char 2591 ess_read_x_reg(struct ess_softc *sc, u_char reg) 2592 { 2593 int error; 2594 int val; 2595 2596 if ((error = ess_wdsp(sc, 0xC0)) == 0) 2597 error = ess_wdsp(sc, reg); 2598 if (error) { 2599 DPRINTF(("Error reading extended register 0x%02x\n", reg)); 2600 } 2601 /* REVISIT: what if an error is returned above? */ 2602 val = ess_rdsp(sc); 2603 DPRINTFN(2,("ess_read_x_reg: %02x=%02x\n", reg, val)); 2604 return val; 2605 } 2606 2607 void 2608 ess_clear_xreg_bits(struct ess_softc *sc, u_char reg, u_char mask) 2609 { 2610 if (ess_write_x_reg(sc, reg, ess_read_x_reg(sc, reg) & ~mask) == -1) { 2611 DPRINTF(("Error clearing bits in extended register 0x%02x\n", 2612 reg)); 2613 } 2614 } 2615 2616 void 2617 ess_set_xreg_bits(struct ess_softc *sc, u_char reg, u_char mask) 2618 { 2619 if (ess_write_x_reg(sc, reg, ess_read_x_reg(sc, reg) | mask) == -1) { 2620 DPRINTF(("Error setting bits in extended register 0x%02x\n", 2621 reg)); 2622 } 2623 } 2624 2625 2626 /* 2627 * Write a value to one of the ESS mixer registers. 2628 */ 2629 void 2630 ess_write_mix_reg(struct ess_softc *sc, u_char reg, u_char val) 2631 { 2632 bus_space_tag_t iot; 2633 bus_space_handle_t ioh; 2634 2635 DPRINTFN(2,("ess_write_mix_reg: %x=%x\n", reg, val)); 2636 2637 iot = sc->sc_iot; 2638 ioh = sc->sc_ioh; 2639 EWRITE1(iot, ioh, ESS_MIX_REG_SELECT, reg); 2640 EWRITE1(iot, ioh, ESS_MIX_REG_DATA, val); 2641 } 2642 2643 /* 2644 * Read the value of one of the ESS mixer registers. 2645 */ 2646 u_char 2647 ess_read_mix_reg(struct ess_softc *sc, u_char reg) 2648 { 2649 bus_space_tag_t iot; 2650 bus_space_handle_t ioh; 2651 u_char val; 2652 2653 iot = sc->sc_iot; 2654 ioh = sc->sc_ioh; 2655 EWRITE1(iot, ioh, ESS_MIX_REG_SELECT, reg); 2656 val = EREAD1(iot, ioh, ESS_MIX_REG_DATA); 2657 2658 DPRINTFN(2,("ess_read_mix_reg: %x=%x\n", reg, val)); 2659 return val; 2660 } 2661 2662 void 2663 ess_clear_mreg_bits(struct ess_softc *sc, u_char reg, u_char mask) 2664 { 2665 2666 ess_write_mix_reg(sc, reg, ess_read_mix_reg(sc, reg) & ~mask); 2667 } 2668 2669 void 2670 ess_set_mreg_bits(struct ess_softc *sc, u_char reg, u_char mask) 2671 { 2672 2673 ess_write_mix_reg(sc, reg, ess_read_mix_reg(sc, reg) | mask); 2674 } 2675 2676 void 2677 ess_read_multi_mix_reg(struct ess_softc *sc, u_char reg, 2678 uint8_t *datap, bus_size_t count) 2679 { 2680 bus_space_tag_t iot; 2681 bus_space_handle_t ioh; 2682 2683 iot = sc->sc_iot; 2684 ioh = sc->sc_ioh; 2685 EWRITE1(iot, ioh, ESS_MIX_REG_SELECT, reg); 2686 bus_space_read_multi_1(iot, ioh, ESS_MIX_REG_DATA, datap, count); 2687 } 2688
Indexes created Sun Sep 28 07:09:56 GMT 2025