xref: /src/sys/dev/isa/files.isa

#	$NetBSD: files.isa,v 1.10 1996/01/13 02:05:15 thorpej Exp $
#
# Config.new file and device description for machine-independent ISA code.
# Included by ports that need it.  Requires that the SCSI files be
# defined first.

# ports should define their own "device isa" line (like the one below,
# but with the correct bus attachment).  IT MUST USE CONFIGURATION
# LOCATORS IDENTICAL TO THOSE SPECIFIED BELOW.

# ports should specify appropriate major numbers for the following
# devices:
#	mcd, scd, wd, wt

#device	isa at root {[port = -1], [size = 0],
#		     [iomem = -1], [iosiz = 0],
#		     [irq = -1], [drq = -1]}
file	dev/isa/isa.c			isa needs-flag

# ISA DMA controller
define	isadma
file	dev/isa/isadma.c		isadma needs-flag

#
# 8250/16[45]50-based multi-port serial boards
#

define	commulti {[slave = -1]}

# AST 4-port board
device	ast at isa: commulti
file	dev/isa/ast.c			ast

# BOCA 8-port board
device	boca at isa: commulti
file	dev/isa/boca.c			boca

# IBM RT PC 4-port board
device	rtfps at isa: commulti
file	dev/isa/rtfps.c			rtfps

#
# Serial and parallel drivers
#

# 8250/16[45]50-based "com" ports
device	com at isa, commulti: tty
file	dev/isa/com.c			com needs-flag

# Cyclades Cyclom multiport serial cards
# XXX currently broken
device	cy at isa: tty
file	dev/isa/cy.c			cy needs-count

# PC parallel ports (XXX what chip?)
device	lpt at isa
file	dev/isa/lpt.c			lpt needs-flag

#
# SCSI host adapters
#

# Adaptec AHA-154x family
device	aha at isa: scsi, isadma
file	dev/isa/aha1542.c		aha

# Adapctec AIC-6[32]60 ICs
device	aic at isa: scsi, isadma
file	dev/isa/aic6360.c		aic

# Adaptec 7770-based EISA, VLB, etc. controllers
device	ahe at isa: scsi, aic7xxx
file	dev/isa/aha284x.c		ahe

# BusLogic BT-74x EISA family (XXX; should be EISA.  it's special)
device	bt at isa: scsi, isadma
file	dev/isa/bt742a.c		bt

# Seagate ST0[12] ICs
device	sea at isa: scsi, isadma
file	dev/isa/seagate.c		sea

# UltraStor UHA-[13]4f boards
device	uha at isa: scsi, isadma
file	dev/isa/ultra14f.c		uha

# Western Digital WD7000 boards (XXX incomplete description)
# XXX not yet working
device	wds at isa: scsi, isadma
file	dev/isa/wd7000.c		wds

#
# Other ISA disk controllers
#

# Mitsumi CD-ROM controllers
device	mcd at isa: disk
file	dev/isa/mcd.c			mcd needs-flag

# Sony CDU-3[13]A CD-ROM drives
device	scd at isa: disk
file	dev/isa/scd.c			scd needs-flag

# ISA "wd" (ESDI/IDE/etc.) controllers
device	wdc at isa {drive = -1}
device	wd at wdc: disk, isadma
file	dev/isa/wd.c			wdc needs-flag

# Wangtek- and Archive-compatible tape controller boards
device	wt at isa: tape, isadma
file	dev/isa/wt.c			wt needs-flag

#
# ISA networking drivers
#

# 3Com common probe code
define	elink
file	dev/isa/elink.c			elink

# National Semiconductor DS8390/WD83C690-based boards
# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones)
device	ed at isa: ether, ifnet
file	dev/isa/if_ed.c			ed

# 3Com 3C505
device	eg at isa: ether, ifnet
file	dev/isa/if_eg.c			eg

# 3Com 3C501
device	el at isa: ether, ifnet
file	dev/isa/if_el.c			el

# 3Com 3C5x9, 3c59x (EtherLink III) family
device	ep at isa, pci: ether, ifnet, elink
file	dev/isa/if_ep.c			ep

# Fujitsu MB8696[05]-based boards
# (Allied Telesis AT1700)
device	fe at isa: ether, ifnet
file	dev/isa/if_fe.c			fe

# HP Lan Ethernet controllers
# XXX currently broken
#device hp at isa: ether, ifnet
#file	dev/isa/if_hp.c			hp

# Intel i82586-based boards
# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507)
device	ie at isa: ether, ifnet, elink
file	dev/isa/if_ie.c			ie

# XXX ???
# XXX NOT IN TREE?
#device	ix at isa: ether, ifnet
#file	dev/isa/if_ix.c			ix

# AMD am7990 (Lance) -based boards
# (BICC Isolan, NE2100, DEPCA)
# XXX conflicts with alpha if_le.c
#device	le at isa: ether, ifnet, isadma
#file	dev/isa/if_le.c			le

#
# ISA Sound hardware
#

# the SoundBlaster DSP, or close likenesses; used by other drivers
define	sbdsp
file	dev/isa/sbdsp.c			sbdsp

# SoundBlaster family
device	sb at isa: audio, isadma, sbdsp, mulaw
file	dev/isa/sb.c			sb needs-flag

# ProAudio Spectrum
device	pas at isa: audio, isadma, sbdsp, mulaw
file	dev/isa/pas.c			pas needs-flag

# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
define	ad1848
file	dev/isa/ad1848.c		ad1848

# ICS2101 mixer chip support; used by other drivers
define	ics2101
file	dev/isa/ics2101.c		ics2101


# Audio systems based on Echo Speech Corp. ESC61[45] ASICs
device	pss at isa {[port = -1], [size = 0],
		    [iomem = -1], [iosiz = 0],
		    [irq = -1], [drq = -1]}
device	sp at pss: audio, isadma, ad1848
file	dev/isa/pss.c			pss needs-flag

# Microsoft Windows Sound System
device	wss at isa: audio, isadma, ad1848
file	dev/isa/wss.c			wss needs-flag

# Gravis UltraSound & UltraSound MAX.
# Use the "flags" keyword in a config file to specify an extra DMA
# channel for full-duplex operation. 
device	gus at isa: audio, isadma, ics2101, ad1848, mulaw
file	dev/isa/gus.c			gus needs-flag