files.isa revision 1.14
1 # $NetBSD: files.isa,v 1.14 1996/03/17 07:30:25 cgd Exp $ 2 # 3 # Config.new file and device description for machine-independent ISA code. 4 # Included by ports that need it. Requires that the SCSI files be 5 # defined first. 6 7 # ports should specify appropriate major numbers for the following 8 # devices: 9 # mcd, scd, wd, wt 10 11 device isa {[port = -1], [size = 0], 12 [iomem = -1], [iosiz = 0], 13 [irq = -1], [drq = -1]} 14 attach isa at isabus 15 file dev/isa/isa.c isa needs-flag 16 17 # ISA DMA controller 18 define isadma 19 file dev/isa/isadma.c isadma needs-flag 20 21 # 22 # 8250/16[45]50-based multi-port serial boards 23 # 24 25 define commulti {[slave = -1]} 26 27 # AST 4-port board 28 device ast: commulti 29 attach ast at isa 30 file dev/isa/ast.c ast 31 32 # BOCA 8-port board 33 device boca: commulti 34 attach boca at isa 35 file dev/isa/boca.c boca 36 37 # IBM RT PC 4-port board 38 device rtfps: commulti 39 attach rtfps at isa 40 file dev/isa/rtfps.c rtfps 41 42 # 43 # Serial and parallel drivers 44 # 45 46 # 8250/16[45]50-based "com" ports 47 device com: tty 48 attach com at isa with com_isa 49 attach com at commulti with com_commulti 50 file dev/isa/com.c com com_isa com_commulti needs-flag 51 52 # Cyclades Cyclom multiport serial cards 53 # XXX currently broken 54 device cy: tty 55 attach cy at isa 56 file dev/isa/cy.c cy needs-count 57 58 # PC parallel ports (XXX what chip?) 59 device lpt 60 attach lpt at isa 61 file dev/isa/lpt.c lpt needs-flag 62 63 # 64 # SCSI host adapters 65 # 66 67 # Adaptec AHA-154x family 68 device aha: scsi, isadma 69 attach aha at isa 70 file dev/isa/aha1542.c aha 71 72 # Adapctec AIC-6[32]60 ICs 73 device aic: scsi, isadma 74 attach aic at isa 75 file dev/isa/aic6360.c aic 76 77 # Adaptec 7770-based EISA, VLB, etc. controllers 78 device ahe: scsi, aic7xxx 79 attach ahe at isa 80 file dev/isa/aha284x.c ahe 81 82 # BusLogic BT-74x EISA family (XXX; should be EISA. it's special) 83 device bt: scsi, isadma 84 attach bt at isa 85 file dev/isa/bt742a.c bt 86 87 # Seagate ST0[12] ICs 88 device sea: scsi, isadma 89 attach sea at isa 90 file dev/isa/seagate.c sea 91 92 # UltraStor UHA-[13]4f boards 93 device uha: scsi, isadma 94 attach uha at isa 95 file dev/isa/ultra14f.c uha 96 97 # Western Digital WD7000 boards (XXX incomplete description) 98 # XXX not yet working 99 device wds: scsi, isadma 100 attach wds at isa 101 file dev/isa/wd7000.c wds 102 103 # 104 # Other ISA disk controllers 105 # 106 107 # Mitsumi CD-ROM controllers 108 device mcd: disk 109 attach mcd at isa 110 file dev/isa/mcd.c mcd needs-flag 111 112 # Sony CDU-3[13]A CD-ROM drives 113 device scd: disk 114 attach scd at isa 115 file dev/isa/scd.c scd needs-flag 116 117 # ISA "wd" (ESDI/IDE/etc.) controllers 118 device wdc {drive = -1} 119 attach wdc at isa 120 device wd: disk, isadma 121 attach wd at wdc 122 file dev/isa/wd.c wdc needs-flag 123 124 # Wangtek- and Archive-compatible tape controller boards 125 device wt: tape, isadma 126 attach wt at isa 127 file dev/isa/wt.c wt needs-flag 128 129 # 130 # ISA networking drivers 131 # 132 133 # 3Com common probe code 134 define elink 135 file dev/isa/elink.c elink 136 137 # National Semiconductor DS8390/WD83C690-based boards 138 # (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 139 device ed: ether, ifnet 140 attach ed at isa 141 file dev/isa/if_ed.c ed 142 143 # 3Com 3C505 144 device eg: ether, ifnet 145 attach eg at isa 146 file dev/isa/if_eg.c eg 147 148 # 3Com 3C501 149 device el: ether, ifnet 150 attach el at isa 151 file dev/isa/if_el.c el 152 153 # 3Com 3C5x9, 3c59x (EtherLink III) family 154 device ep: ether, ifnet, elink 155 attach ep at isa with ep_isa 156 attach ep at pci with ep_pci 157 file dev/isa/if_ep.c ep 158 159 # Fujitsu MB8696[05]-based boards 160 # (Allied Telesis AT1700) 161 device fe: ether, ifnet 162 attach fe at isa 163 file dev/isa/if_fe.c fe 164 165 # HP Lan Ethernet controllers 166 # XXX currently broken 167 #device hp: ether, ifnet 168 #attach hp at isa 169 #file dev/isa/if_hp.c hp 170 171 # Intel i82586-based boards 172 # (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 173 device ie: ether, ifnet, elink 174 attach ie at isa 175 file dev/isa/if_ie.c ie 176 177 # XXX ??? 178 # XXX NOT IN TREE? 179 #device ix: ether, ifnet 180 #attach ix at isa 181 #file dev/isa/if_ix.c ix 182 183 # AMD am7990 (Lance) -based boards 184 # (BICC Isolan, NE2100, DEPCA) 185 # XXX conflicts with alpha if_le.c 186 #device le: ether, ifnet, isadma 187 #attach le at isa with le_isa 188 #file dev/isa/if_le.c le 189 190 # 191 # ISA Sound hardware 192 # 193 194 # the SoundBlaster DSP, or close likenesses; used by other drivers 195 define sbdsp 196 file dev/isa/sbdsp.c sbdsp 197 198 # SoundBlaster family 199 device sb: audio, isadma, sbdsp, mulaw 200 attach sb at isa 201 file dev/isa/sb.c sb needs-flag 202 203 # ProAudio Spectrum 204 device pas: audio, isadma, sbdsp, mulaw 205 attach pas at isa 206 file dev/isa/pas.c pas needs-flag 207 208 # AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 209 define ad1848 210 file dev/isa/ad1848.c ad1848 211 212 # ICS2101 mixer chip support; used by other drivers 213 define ics2101 214 file dev/isa/ics2101.c ics2101 215 216 217 # Audio systems based on Echo Speech Corp. ESC61[45] ASICs 218 device pss {[port = -1], [size = 0], 219 [iomem = -1], [iosiz = 0], 220 [irq = -1], [drq = -1]} 221 attach pss at isa 222 device sp: audio, isadma, ad1848 223 attach sp at pss 224 file dev/isa/pss.c pss needs-flag 225 226 # Microsoft Windows Sound System 227 device wss: audio, isadma, ad1848 228 attach wss at isa 229 file dev/isa/wss.c wss needs-flag 230 231 # Gravis UltraSound & UltraSound MAX. 232 # Use the "flags" keyword in a config file to specify an extra DMA 233 # channel for full-duplex operation. 234 device gus: audio, isadma, ics2101, ad1848, mulaw 235 attach gus at isa 236 file dev/isa/gus.c gus needs-flag 237
Indexes created Mon Sep 22 05:09:51 GMT 2025