files.isa revision 1.19
1 # $NetBSD: files.isa,v 1.19 1996/05/06 21:36:58 is Exp $ 2 # 3 # Config.new file and device description for machine-independent ISA code. 4 # Included by ports that need it. Requires that the SCSI files be 5 # defined first. 6 7 # ports should specify appropriate major numbers for the following 8 # devices: 9 # mcd, scd, wd, wt 10 11 device isa {[port = -1], [size = 0], 12 [iomem = -1], [iosiz = 0], 13 [irq = -1], [drq = -1]} 14 attach isa at isabus 15 file dev/isa/isa.c isa needs-flag 16 17 # ISA DMA controller 18 define isadma 19 file dev/isa/isadma.c isadma needs-flag 20 21 # 22 # 8250/16[45]50-based multi-port serial boards 23 # 24 25 define commulti {[slave = -1]} 26 27 # AST 4-port board 28 device ast: commulti 29 attach ast at isa 30 file dev/isa/ast.c ast 31 32 # BOCA 8-port board 33 device boca: commulti 34 attach boca at isa 35 file dev/isa/boca.c boca 36 37 # IBM RT PC 4-port board 38 device rtfps: commulti 39 attach rtfps at isa 40 file dev/isa/rtfps.c rtfps 41 42 # 43 # Serial and parallel drivers 44 # 45 46 # 8250/16[45]50-based "com" ports 47 device com: tty 48 attach com at isa with com_isa 49 attach com at commulti with com_commulti 50 file dev/isa/com.c com & (com_isa | com_commulti) needs-flag 51 52 # Cyclades Cyclom multiport serial cards 53 # XXX currently broken 54 device cy: tty 55 attach cy at isa 56 file dev/isa/cy.c cy needs-count 57 58 # PC parallel ports (XXX what chip?) 59 device lpt 60 attach lpt at isa 61 file dev/isa/lpt.c lpt needs-flag 62 63 # 64 # SCSI host adapters 65 # 66 67 # Adaptec AHA-154x family 68 device aha: scsi, isadma 69 attach aha at isa 70 file dev/isa/aha.c aha 71 72 # Adapctec AIC-6[32]60 ICs 73 device aic: scsi, isadma 74 attach aic at isa 75 file dev/isa/aic6360.c aic 76 77 # Adaptec 7770-based EISA, VLB, etc. controllers 78 device ahe: scsi, aic7xxx 79 attach ahe at isa 80 file dev/isa/aha284x.c ahe 81 82 # BusLogic BT-74x EISA family (XXX; should be EISA. it's special) 83 device bt: scsi, isadma 84 attach bt at isa 85 file dev/isa/bt.c bt 86 87 # Seagate ST0[12] ICs 88 device sea: scsi, isadma 89 attach sea at isa 90 file dev/isa/seagate.c sea 91 92 # UltraStor UHA-[13]4f boards 93 device uha: scsi, isadma 94 attach uha at isa 95 file dev/isa/ultra14f.c uha 96 97 # Western Digital WD7000 and Future Domain TMC-7000 boards 98 device wds: scsi, isadma 99 attach wds at isa 100 file dev/isa/wds.c wds 101 102 # 103 # Other ISA disk controllers 104 # 105 106 # Mitsumi CD-ROM controllers 107 device mcd: disk 108 attach mcd at isa 109 file dev/isa/mcd.c mcd needs-flag 110 111 # Sony CDU-3[13]A CD-ROM drives 112 device scd: disk 113 attach scd at isa 114 file dev/isa/scd.c scd needs-flag 115 116 # ISA "wd" (ESDI/IDE/etc.) controllers 117 device wdc {drive = -1} 118 attach wdc at isa 119 device wd: disk, isadma 120 attach wd at wdc 121 file dev/isa/wd.c wdc needs-flag 122 123 # Wangtek- and Archive-compatible tape controller boards 124 device wt: tape, isadma 125 attach wt at isa 126 file dev/isa/wt.c wt needs-flag 127 128 # 129 # ISA networking drivers 130 # 131 132 # 3Com common probe code 133 define elink 134 file dev/isa/elink.c elink 135 136 # National Semiconductor DS8390/WD83C690-based boards 137 # (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 138 device ed: ether, ifnet 139 attach ed at isa 140 file dev/isa/if_ed.c ed 141 142 # 3Com 3C505 143 device eg: ether, ifnet 144 attach eg at isa 145 file dev/isa/if_eg.c eg 146 147 # 3Com 3C501 148 device el: ether, ifnet 149 attach el at isa 150 file dev/isa/if_el.c el 151 152 # 3Com 3C509 Ethernet controller 153 attach ep at isa with ep_isa: elink 154 file dev/isa/if_ep_isa.c ep_isa 155 156 # Fujitsu MB8696[05]-based boards 157 # (Allied Telesis AT1700) 158 device fe: ether, ifnet 159 attach fe at isa 160 file dev/isa/if_fe.c fe 161 162 # HP Lan Ethernet controllers 163 # XXX currently broken 164 #device hp: ether, ifnet 165 #attach hp at isa 166 #file dev/isa/if_hp.c hp 167 168 # Intel i82586-based boards 169 # (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 170 device ie: ether, ifnet, elink 171 attach ie at isa 172 file dev/isa/if_ie.c ie 173 174 # Intel i82595-based boards. 175 # (Intel EtherExpress PRO) 176 device iy: ether, ifnet 177 attach iy at isa 178 file dev/isa/if_iy.c iy 179 180 # XXX ??? 181 # XXX NOT IN TREE? 182 #device ix: ether, ifnet 183 #attach ix at isa 184 #file dev/isa/if_ix.c ix 185 186 # AMD am7990 (Lance) -based boards 187 # (BICC Isolan, NE2100, DEPCA) 188 # XXX conflicts with alpha if_le.c 189 #device le: ether, ifnet, isadma 190 #attach le at isa with le_isa 191 #file dev/isa/if_le.c le 192 193 # 194 # ISA Sound hardware 195 # 196 197 # the SoundBlaster DSP, or close likenesses; used by other drivers 198 define sbdsp 199 file dev/isa/sbdsp.c sbdsp 200 201 # SoundBlaster family 202 device sb: audio, isadma, sbdsp, mulaw 203 attach sb at isa 204 file dev/isa/sb.c sb needs-flag 205 206 # ProAudio Spectrum 207 device pas: audio, isadma, sbdsp, mulaw 208 attach pas at isa 209 file dev/isa/pas.c pas needs-flag 210 211 # AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 212 define ad1848 213 file dev/isa/ad1848.c ad1848 214 215 # ICS2101 mixer chip support; used by other drivers 216 define ics2101 217 file dev/isa/ics2101.c ics2101 218 219 220 # Audio systems based on Echo Speech Corp. ESC61[45] ASICs 221 device pss {[port = -1], [size = 0], 222 [iomem = -1], [iosiz = 0], 223 [irq = -1], [drq = -1]} 224 attach pss at isa 225 device sp: audio, isadma, ad1848 226 attach sp at pss 227 file dev/isa/pss.c pss needs-flag 228 229 # Microsoft Windows Sound System 230 device wss: audio, isadma, ad1848 231 attach wss at isa 232 file dev/isa/wss.c wss needs-flag 233 234 # Gravis UltraSound & UltraSound MAX. 235 # Use the "flags" keyword in a config file to specify an extra DMA 236 # channel for full-duplex operation. 237 device gus: audio, isadma, ics2101, ad1848, mulaw 238 attach gus at isa 239 file dev/isa/gus.c gus needs-flag 240
Indexes created Tue Sep 23 02:09:52 GMT 2025