Home | History | Annotate | Line # | Download | only in isa
files.isa revision 1.6
      1 #	$NetBSD: files.isa,v 1.6 1995/04/26 21:45:57 brezak Exp $
      2 #
      3 # Config.new file and device description for machine-independent ISA code.
      4 # Included by ports that need it.  Requires that the SCSI files be
      5 # defined first.
      6 
      7 # ports should define their own "device isa" line (like the one below,
      8 # but with the correct bus attachment).  IT MUST USE CONFIGURATION
      9 # LOCATORS IDENTICAL TO THOSE SPECIFIED BELOW.
     10 
     11 # ports should specify appropriate major numbers for the following
     12 # devices:
     13 #	mcd, scd, wd, wt
     14 
     15 #device	isa at root {[port = -1], [size = 0],
     16 #		     [iomem = -1], [iosiz = 0],
     17 #		     [irq = -1], [drq = -1]}
     18 file	dev/isa/isa.c			isa needs-flag
     19 
     20 # ISA DMA controller
     21 define	isadma
     22 file	dev/isa/isadma.c		isadma needs-flag
     23 
     24 #
     25 # 8250/16[45]50-based multi-port serial boards
     26 #
     27 
     28 define	commulti {[slave = -1]}
     29 
     30 # AST 4-port board
     31 device	ast at isa: commulti
     32 file	dev/isa/ast.c			ast
     33 
     34 # BOCA 8-port board
     35 device	boca at isa: commulti
     36 file	dev/isa/boca.c			boca
     37 
     38 # IBM RT PC 4-port board
     39 device	rtfps at isa: commulti
     40 file	dev/isa/rtfps.c			rtfps
     41 
     42 #
     43 # Serial and parallel drivers
     44 #
     45 
     46 # 8250/16[45]50-based "com" ports
     47 device	com at isa, commulti: tty
     48 file	dev/isa/com.c			com needs-flag
     49 
     50 # Cyclades Cyclom multiport serial cards
     51 # XXX currently broken
     52 #device	cy at isa: tty
     53 #file	dev/isa/cy.c			cy needs-count
     54 
     55 # PC parallel ports (XXX what chip?)
     56 device	lpt at isa
     57 file	dev/isa/lpt.c			lpt needs-flag
     58 
     59 #
     60 # SCSI host adapters
     61 #
     62 
     63 # Adaptec AHA-154x family
     64 device	aha at isa: scsi, isadma
     65 file	dev/isa/aha1542.c		aha
     66 
     67 # Adapctec AIC-6[32]60 ICs
     68 device	aic at isa: scsi, isadma
     69 file	dev/isa/aic6360.c		aic
     70 
     71 # BusLogic BT-74x EISA family (XXX; should be EISA.  it's special)
     72 device	bt at isa: scsi, isadma
     73 file	dev/isa/bt742a.c		bt
     74 
     75 # Seagate ST0[12] ICs
     76 device	sea at isa: scsi, isadma
     77 file	dev/isa/seagate.c		sea
     78 
     79 # UltraStor UHA-[13]4f boards
     80 device	uha at isa: scsi, isadma
     81 file	dev/isa/ultra14f.c		uha
     82 
     83 # Western Digital WD7000 boards (XXX incomplete description)
     84 # XXX not yet working
     85 device	wds at isa: scsi, isadma
     86 file	dev/isa/wd7000.c		wds
     87 
     88 #
     89 # Other ISA disk controllers
     90 #
     91 
     92 # Mitsumi CD-ROM controllers
     93 device	mcd at isa: disk
     94 file	dev/isa/mcd.c			mcd needs-flag
     95 
     96 # Sony CDU-3[13]A CD-ROM drives
     97 device	scd at isa: disk
     98 file	dev/isa/scd.c			scd needs-flag
     99 
    100 # ISA "wd" (ESDI/IDE/etc.) controllers
    101 device	wdc at isa {drive = -1}
    102 device	wd at wdc: disk, isadma
    103 file	dev/isa/wd.c			wdc needs-flag
    104 
    105 # Wangtek- and Archive-compatible tape controller boards
    106 device	wt at isa: tape, isadma
    107 file	dev/isa/wt.c			wt needs-flag
    108 
    109 #
    110 # ISA networking drivers
    111 #
    112 
    113 # 3Com common probe code
    114 define	elink
    115 file	dev/isa/elink.c			elink
    116 
    117 # National Semiconductor DS8390/WD83C690-based boards
    118 # (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones)
    119 device	ed at isa: ether, ifnet
    120 file	dev/isa/if_ed.c			ed
    121 
    122 # 3Com 3C505
    123 device	eg at isa: ether, ifnet
    124 file	dev/isa/if_eg.c			eg
    125 
    126 # 3Com 3C501
    127 device	el at isa: ether, ifnet
    128 file	dev/isa/if_el.c			el
    129 
    130 # 3Com 3C5x9 (EtherLink III) family
    131 device	ep at isa: ether, ifnet, elink
    132 file	dev/isa/if_ep.c			ep
    133 
    134 # Fujitsu MB8696[05]-based boards
    135 # (Allied Telesis AT1700)
    136 device	fe at isa: ether, ifnet
    137 file	dev/isa/if_fe.c			fe
    138 
    139 # HP Lan Ethernet controllers
    140 # XXX currently broken
    141 #device hp at isa: ether, ifnet
    142 #file	dev/isa/if_hp.c			hp
    143 
    144 # Intel i82586-based boards
    145 # (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507)
    146 device	ie at isa: ether, ifnet, elink
    147 file	dev/isa/if_ie.c			ie
    148 
    149 # XXX ???
    150 # XXX NOT IN TREE?
    151 #device	ix at isa: ether, ifnet
    152 #file	dev/isa/if_ix.c			ix
    153 
    154 # AMD am7990 (Lance) -based boards
    155 # (BICC Isolan, NE2100, DEPCA)
    156 # XXX conflicts with alpha if_le.c
    157 #device	le at isa: ether, ifnet, isadma
    158 #file	dev/isa/if_le.c			le
    159 
    160 #
    161 # ISA Sound hardware
    162 #
    163 
    164 # the SoundBlaster DSP, or close likenesses; used by other drivers
    165 define	sbdsp
    166 file	dev/isa/sbdsp.c			sbdsp
    167 
    168 # SoundBlaster family
    169 device	sb at isa: audio, isadma, sbdsp
    170 file	dev/isa/sb.c			sb needs-flag
    171 
    172 # ProAudio Spectrum
    173 device	pas at isa: audio, isadma, sbdsp
    174 file	dev/isa/pas.c			pas needs-flag
    175 
    176 # AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
    177 define	ad1848
    178 file	dev/isa/ad1848.c		ad1848
    179 
    180 # Audio systems based on Echo Speech Corp. ESC61[45] ASICs
    181 device	pss at isa {[port = -1], [size = 0],
    182 		    [iomem = -1], [iosiz = 0],
    183 		    [irq = -1], [drq = -1]}
    184 device	sp at pss: audio, isadma, ad1848
    185 file	dev/isa/pss.c			pss needs-flag
    186 
    187 # Microsoft Windows Sound System
    188 device	wss at isa: audio, isadma, ad1848
    189 file	dev/isa/wss.c			wss needs-flag
    190