xref: /src/sys/dev/isa/i82365_isa.c

/*	$NetBSD: i82365_isa.c,v 1.1.2.4 1997/10/16 22:46:23 thorpej Exp $	*/

#define	PCICISADEBUG

/*
 * Copyright (c) 1997 Marc Horowitz.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Marc Horowitz.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/extent.h>
#include <sys/malloc.h>

#include <vm/vm.h>

#include <machine/bus.h>
#include <machine/intr.h>

#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>

#include <dev/pcmcia/pcmciareg.h>
#include <dev/pcmcia/pcmciavar.h>
#include <dev/pcmcia/pcmciachip.h>

#include <dev/ic/i82365reg.h>
#include <dev/ic/i82365var.h>

#ifdef PCICISADEBUG
int	pcicisa_debug = 0 /* XXX */ ;
#define	DPRINTF(arg) if (pcicisa_debug) printf arg;
#else
#define	DPRINTF(arg)
#endif

int	pcic_isa_probe __P((struct device *, void *, void *));
void	pcic_isa_attach __P((struct device *, struct device *, void *));

void	*pcic_isa_chip_intr_establish __P((pcmcia_chipset_handle_t,
	    struct pcmcia_function *, int, int (*) (void *), void *));
void	pcic_isa_chip_intr_disestablish __P((pcmcia_chipset_handle_t, void *));

struct cfattach pcic_isa_ca = {
	sizeof(struct pcic_softc), pcic_isa_probe, pcic_isa_attach
};

static struct pcmcia_chip_functions pcic_isa_functions = {
	pcic_chip_mem_alloc,
	pcic_chip_mem_free,
	pcic_chip_mem_map,
	pcic_chip_mem_unmap,

	pcic_chip_io_alloc,
	pcic_chip_io_free,
	pcic_chip_io_map,
	pcic_chip_io_unmap,

	pcic_isa_chip_intr_establish,
	pcic_isa_chip_intr_disestablish,

	pcic_chip_socket_enable,
	pcic_chip_socket_disable,
};

int
pcic_isa_probe(parent, match, aux)
	struct device *parent;
	void *match, *aux;
{
	struct isa_attach_args *ia = aux;
	bus_space_tag_t iot = ia->ia_iot;
	bus_space_handle_t ioh, memh;
	int val, found;

	if (bus_space_map(iot, ia->ia_iobase, PCIC_IOSIZE, 0, &ioh))
		return (0);

	if (ia->ia_msize == -1)
		ia->ia_msize = PCIC_MEMSIZE;

	if (bus_space_map(ia->ia_memt, ia->ia_maddr, ia->ia_msize, 0, &memh))
		return (0);

	found = 0;

	/*
	 * this could be done with a loop, but it would violate the
	 * abstraction
	 */

	bus_space_write_1(iot, ioh, PCIC_REG_INDEX, C0SA + PCIC_IDENT);

	val = bus_space_read_1(iot, ioh, PCIC_REG_DATA);

	if (pcic_ident_ok(val))
		found++;


	bus_space_write_1(iot, ioh, PCIC_REG_INDEX, C0SB + PCIC_IDENT);

	val = bus_space_read_1(iot, ioh, PCIC_REG_DATA);

	if (pcic_ident_ok(val))
		found++;


	bus_space_write_1(iot, ioh, PCIC_REG_INDEX, C1SA + PCIC_IDENT);

	val = bus_space_read_1(iot, ioh, PCIC_REG_DATA);

	if (pcic_ident_ok(val))
		found++;


	bus_space_write_1(iot, ioh, PCIC_REG_INDEX, C1SB + PCIC_IDENT);

	val = bus_space_read_1(iot, ioh, PCIC_REG_DATA);

	if (pcic_ident_ok(val))
		found++;


	bus_space_unmap(iot, ioh, PCIC_IOSIZE);
	bus_space_unmap(ia->ia_memt, memh, ia->ia_msize);

	if (!found)
		return (0);

	ia->ia_iosize = PCIC_IOSIZE;

	return (1);
}

#ifndef PCIC_ISA_ALLOC_IOBASE
#define	PCIC_ISA_ALLOC_IOBASE 0
#endif

#ifndef PCIC_ISA_ALLOC_IOSIZE
#define	PCIC_ISA_ALLOC_IOSIZE 0
#endif

int	pcic_isa_alloc_iobase = PCIC_ISA_ALLOC_IOBASE;
int	pcic_isa_alloc_iosize = PCIC_ISA_ALLOC_IOSIZE;

void
pcic_isa_attach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	struct pcic_softc *sc = (void *) self;
	struct isa_attach_args *ia = aux;
	isa_chipset_tag_t ic = ia->ia_ic;
	bus_space_tag_t iot = ia->ia_iot;
	bus_space_tag_t memt = ia->ia_memt;
	bus_space_handle_t ioh;
	bus_space_handle_t memh;
	bus_space_handle_t ioh_high;
	int i, iobuswidth, tmp1, tmp2;

	/* Map i/o space. */
	if (bus_space_map(iot, ia->ia_iobase, ia->ia_iosize, 0, &ioh))
		panic("pcic_isa_attach: can't map i/o space");

	/* Map mem space. */
	if (bus_space_map(memt, ia->ia_maddr, ia->ia_msize, 0, &memh))
		panic("pcic_isa_attach: can't map i/o space");

	sc->membase = ia->ia_maddr;
	sc->subregionmask = (1 << (ia->ia_msize / PCIC_MEM_PAGESIZE)) - 1;

	sc->intr_est = ic;
	sc->pct = (pcmcia_chipset_tag_t) & pcic_isa_functions;

	sc->iot = iot;
	sc->ioh = ioh;
	sc->memt = memt;
	sc->memh = memh;

	/*
	 * allocate an irq.  it will be used by both controllers.  I could
	 * use two different interrupts, but interrupts are relatively
	 * scarce, shareable, and for PCIC controllers, very infrequent.
	 */

	if ((sc->irq = ia->ia_irq) == IRQUNK) {
		/* XXX CHECK RETURN VALUE */
		(void) isa_intr_alloc(ic, PCIC_CSC_INTR_IRQ_VALIDMASK,
		    IST_EDGE, &sc->irq);
		printf(": using irq %d", sc->irq);
	}
	printf("\n");

	pcic_attach(sc);

	/*
	 * figure out how wide the isa bus is.  Do this by checking if the
	 * pcic controller is mirrored 0x400 above where we expect it to be.
	 */

	iobuswidth = 12;

	/* Map i/o space. */
	if (bus_space_map(iot, ia->ia_iobase + 0x400, ia->ia_iosize, 0,
	    &ioh_high))
		panic("pcic_isa_attach: can't map high i/o space");

	for (i = 0; i < PCIC_NSLOTS; i++) {
		if (sc->handle[i].flags & PCIC_FLAG_SOCKETP) {
			/*
			 * read the ident flags from the normal space and
			 * from the mirror, and compare them
			 */

			bus_space_write_1(iot, ioh, PCIC_REG_INDEX,
			    sc->handle[i].sock + PCIC_IDENT);
			tmp1 = bus_space_read_1(iot, ioh, PCIC_REG_DATA);

			bus_space_write_1(iot, ioh_high, PCIC_REG_INDEX,
			    sc->handle[i].sock + PCIC_IDENT);
			tmp2 = bus_space_read_1(iot, ioh_high, PCIC_REG_DATA);

			if (tmp1 == tmp2)
				iobuswidth = 10;
		}
	}

	bus_space_free(iot, ioh_high, ia->ia_iosize);

	/*
	 * XXX mycroft recommends I/O space range 0x400-0xfff .  I should put
	 * this in a header somewhere
	 */

	/*
	 * XXX some hardware doesn't seem to grok addresses in 0x400 range--
	 * apparently missing a bit or more of address lines. (e.g.
	 * CIRRUS_PD672X with Linksys EthernetCard ne2000 clone in TI
	 * TravelMate 5000--not clear which is at fault)
	 *
	 * Add a kludge to detect 10 bit wide buses and deal with them,
	 * and also a config file option to override the probe.
	 */

	if (iobuswidth == 10) {
		sc->iobase = 0x300;
		sc->iosize = 0x0ff;
	} else {
		sc->iobase = 0x400;
		sc->iosize = 0xbff;
	}

	DPRINTF(("%s: bus_space_alloc range 0x%04lx-0x%04lx (probed)\n",
	    sc->dev.dv_xname, (long) sc->iobase,
	    (long) sc->iobase + sc->iosize));

	if (pcic_isa_alloc_iobase && pcic_isa_alloc_iosize) {
		sc->iobase = pcic_isa_alloc_iobase;
		sc->iosize = pcic_isa_alloc_iosize;

		DPRINTF(("%s: bus_space_alloc range 0x%04lx-0x%04lx "
		    "(config override)\n", sc->dev.dv_xname, (long) sc->iobase,
		    (long) sc->iobase + sc->iosize));
	}
	sc->ih = isa_intr_establish(ic, sc->irq, IST_EDGE, IPL_TTY,
	    pcic_intr, sc);

	pcic_attach_sockets(sc);
}

/*
 * allow patching or kernel option file override of available IRQs. Useful if
 * order of probing would screw up other devices, or if PCIC hardware/cards
 * have trouble with certain interrupt lines.
 */

#ifndef PCIC_INTR_ALLOC_MASK
#define	PCIC_INTR_ALLOC_MASK	0xffff
#endif

int	pcic_intr_alloc_mask = PCIC_INTR_ALLOC_MASK;

void *
pcic_isa_chip_intr_establish(pch, pf, ipl, fct, arg)
	pcmcia_chipset_handle_t pch;
	struct pcmcia_function *pf;
	int ipl;
	int (*fct) __P((void *));
	void *arg;
{
	struct pcic_handle *h = (struct pcic_handle *) pch;
	int irq, ist;
	void *ih;
	int reg;

	if (pf->cfe->flags & PCMCIA_CFE_IRQLEVEL)
		ist = IST_LEVEL;
	else if (pf->cfe->flags & PCMCIA_CFE_IRQPULSE)
		ist = IST_PULSE;
	else
		ist = IST_LEVEL;

	if (isa_intr_alloc(h->sc->intr_est,
	    PCIC_INTR_IRQ_VALIDMASK & pcic_intr_alloc_mask, ist, &irq))
		return (NULL);
	if ((ih = isa_intr_establish(h->sc->intr_est, irq, ist, ipl,
	    fct, arg)) == NULL)
		return (NULL);

	reg = pcic_read(h, PCIC_INTR);
	reg &= ~PCIC_INTR_IRQ_MASK;
	reg |= irq;
	pcic_write(h, PCIC_INTR, reg);

	h->ih_irq = irq;

	printf("%s: card irq %d\n", h->pcmcia->dv_xname, irq);

	return (ih);
}

void
pcic_isa_chip_intr_disestablish(pch, ih)
	pcmcia_chipset_handle_t pch;
	void *ih;
{
	struct pcic_handle *h = (struct pcic_handle *) pch;
	int reg;

	h->ih_irq = 0;

	reg = pcic_read(h, PCIC_INTR);
	reg &= ~(PCIC_INTR_IRQ_MASK | PCIC_INTR_ENABLE);
	pcic_write(h, PCIC_INTR, reg);

	isa_intr_disestablish(h->sc->intr_est, ih);
}