if_ix.c revision 1.37 1 /* $NetBSD: if_ix.c,v 1.37 2019/04/09 06:19:34 msaitoh Exp $ */
2
3 /*-
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Rafal K. Boni.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include <sys/cdefs.h>
33 __KERNEL_RCSID(0, "$NetBSD: if_ix.c,v 1.37 2019/04/09 06:19:34 msaitoh Exp $");
34
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/mbuf.h>
38 #include <sys/errno.h>
39 #include <sys/device.h>
40 #include <sys/protosw.h>
41 #include <sys/socket.h>
42
43 #include <net/if.h>
44 #include <net/if_dl.h>
45 #include <net/if_types.h>
46 #include <net/if_media.h>
47 #include <net/if_ether.h>
48
49 #include <sys/cpu.h>
50 #include <sys/bus.h>
51 #include <sys/intr.h>
52
53 #include <dev/isa/isareg.h>
54 #include <dev/isa/isavar.h>
55
56 #include <dev/ic/i82586reg.h>
57 #include <dev/ic/i82586var.h>
58 #include <dev/isa/if_ixreg.h>
59
60 #ifdef IX_DEBUG
61 #define DPRINTF(x) printf x
62 #else
63 #define DPRINTF(x)
64 #endif
65
66 static int ix_media[] = {
67 IFM_ETHER | IFM_10_5,
68 IFM_ETHER | IFM_10_2,
69 IFM_ETHER | IFM_10_T,
70 };
71 #define NIX_MEDIA (sizeof(ix_media) / sizeof(ix_media[0]))
72
73 struct ix_softc {
74 struct ie_softc sc_ie;
75
76 bus_space_tag_t sc_regt; /* space tag for registers */
77 bus_space_handle_t sc_regh; /* space handle for registers */
78
79 uint8_t use_pio; /* use PIO rather than shared mem */
80 uint16_t irq_encoded; /* encoded IRQ */
81 void *sc_ih; /* interrupt handle */
82 };
83
84 static void ix_reset(struct ie_softc *, int);
85 static void ix_atten(struct ie_softc *, int);
86 static int ix_intrhook(struct ie_softc *, int);
87
88 static void ix_copyin(struct ie_softc *, void *, int, size_t);
89 static void ix_copyout(struct ie_softc *, const void *, int, size_t);
90
91 static void ix_bus_barrier(struct ie_softc *, int, int, int);
92
93 static uint16_t ix_read_16(struct ie_softc *, int);
94 static void ix_write_16(struct ie_softc *, int, uint16_t);
95 static void ix_write_24(struct ie_softc *, int, int);
96 static void ix_zeromem(struct ie_softc *, int, int);
97
98 static void ix_mediastatus(struct ie_softc *, struct ifmediareq *);
99
100 static uint16_t ix_read_eeprom(bus_space_tag_t, bus_space_handle_t, int);
101 static void ix_eeprom_outbits(bus_space_tag_t, bus_space_handle_t, int,
102 int);
103 static int ix_eeprom_inbits(bus_space_tag_t, bus_space_handle_t);
104 static void ix_eeprom_clock(bus_space_tag_t, bus_space_handle_t, int);
105
106 static int ix_match(device_t, cfdata_t, void *);
107 static void ix_attach(device_t, device_t, void *);
108
109 /*
110 * EtherExpress/16 support routines
111 */
112 static void
113 ix_reset(struct ie_softc *sc, int why)
114 {
115 struct ix_softc *isc = (struct ix_softc *)sc;
116
117 switch (why) {
118 case CHIP_PROBE:
119 bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_ECTRL,
120 IX_RESET_586);
121 delay(100);
122 bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_ECTRL, 0);
123 delay(100);
124 break;
125
126 case CARD_RESET:
127 break;
128 }
129 }
130
131 static void
132 ix_atten(struct ie_softc *sc, int why)
133 {
134 struct ix_softc *isc = (struct ix_softc *)sc;
135
136 bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_ATTN, 0);
137 }
138
139 static uint16_t
140 ix_read_eeprom(bus_space_tag_t iot, bus_space_handle_t ioh, int location)
141 {
142 int ectrl, edata;
143
144 ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
145 ectrl &= IX_ECTRL_MASK;
146 ectrl |= IX_ECTRL_EECS;
147 bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
148
149 ix_eeprom_outbits(iot, ioh, IX_EEPROM_READ, IX_EEPROM_OPSIZE1);
150 ix_eeprom_outbits(iot, ioh, location, IX_EEPROM_ADDR_SIZE);
151 edata = ix_eeprom_inbits(iot, ioh);
152 ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
153 ectrl &= ~(IX_RESET_ASIC | IX_ECTRL_EEDI | IX_ECTRL_EECS);
154 bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
155 ix_eeprom_clock(iot, ioh, 1);
156 ix_eeprom_clock(iot, ioh, 0);
157 return edata;
158 }
159
160 static void
161 ix_eeprom_outbits(bus_space_tag_t iot, bus_space_handle_t ioh, int edata,
162 int count)
163 {
164 int ectrl, i;
165
166 ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
167 ectrl &= ~IX_RESET_ASIC;
168 for (i = count - 1; i >= 0; i--) {
169 ectrl &= ~IX_ECTRL_EEDI;
170 if (edata & (1 << i)) {
171 ectrl |= IX_ECTRL_EEDI;
172 }
173 bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
174 delay(1); /* eeprom data must be setup for 0.4 uSec */
175 ix_eeprom_clock(iot, ioh, 1);
176 ix_eeprom_clock(iot, ioh, 0);
177 }
178 ectrl &= ~IX_ECTRL_EEDI;
179 bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
180 delay(1); /* eeprom data must be held for 0.4 uSec */
181 }
182
183 static int
184 ix_eeprom_inbits(bus_space_tag_t iot, bus_space_handle_t ioh)
185 {
186 int ectrl, edata, i;
187
188 ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
189 ectrl &= ~IX_RESET_ASIC;
190 for (edata = 0, i = 0; i < 16; i++) {
191 edata = edata << 1;
192 ix_eeprom_clock(iot, ioh, 1);
193 ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
194 if (ectrl & IX_ECTRL_EEDO) {
195 edata |= 1;
196 }
197 ix_eeprom_clock(iot, ioh, 0);
198 }
199 return edata;
200 }
201
202 static void
203 ix_eeprom_clock(bus_space_tag_t iot, bus_space_handle_t ioh, int state)
204 {
205 int ectrl;
206
207 ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
208 ectrl &= ~(IX_RESET_ASIC | IX_ECTRL_EESK);
209 if (state) {
210 ectrl |= IX_ECTRL_EESK;
211 }
212 bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
213 delay(9); /* EESK must be stable for 8.38 uSec */
214 }
215
216 static int
217 ix_intrhook(struct ie_softc *sc, int where)
218 {
219 struct ix_softc *isc = (struct ix_softc *)sc;
220
221 switch (where) {
222 case INTR_ENTER:
223 /* entering ISR: disable card interrupts */
224 bus_space_write_1(isc->sc_regt, isc->sc_regh,
225 IX_IRQ, isc->irq_encoded);
226 break;
227
228 case INTR_EXIT:
229 /* exiting ISR: re-enable card interrupts */
230 bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_IRQ,
231 isc->irq_encoded | IX_IRQ_ENABLE);
232 break;
233 }
234
235 return 1;
236 }
237
238
239 static void
240 ix_copyin(struct ie_softc *sc, void *dst, int offset, size_t size)
241 {
242 int i, dribble;
243 uint8_t *bptr = dst;
244 uint16_t *wptr = dst;
245 struct ix_softc *isc = (struct ix_softc *)sc;
246
247 if (isc->use_pio) {
248 /* Reset read pointer to the specified offset */
249 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2,
250 BUS_SPACE_BARRIER_READ);
251 bus_space_write_2(sc->bt, sc->bh, IX_READPTR, offset);
252 bus_space_barrier(sc->bt, sc->bh, IX_READPTR, 2,
253 BUS_SPACE_BARRIER_WRITE);
254 } else
255 bus_space_barrier(sc->bt, sc->bh, offset, size,
256 BUS_SPACE_BARRIER_READ);
257
258 if (offset % 2) {
259 if (isc->use_pio)
260 *bptr = bus_space_read_1(sc->bt, sc->bh, IX_DATAPORT);
261 else
262 *bptr = bus_space_read_1(sc->bt, sc->bh, offset);
263 offset++; bptr++; size--;
264 }
265
266 dribble = size % 2;
267 wptr = (uint16_t*)bptr;
268
269 if (isc->use_pio) {
270 for (i = 0; i < size / 2; i++) {
271 *wptr = bus_space_read_2(sc->bt, sc->bh, IX_DATAPORT);
272 wptr++;
273 }
274 } else
275 bus_space_read_region_2(sc->bt, sc->bh, offset,
276 (uint16_t *)bptr, size / 2);
277
278 if (dribble) {
279 bptr += size - 1;
280 offset += size - 1;
281
282 if (isc->use_pio)
283 *bptr = bus_space_read_1(sc->bt, sc->bh, IX_DATAPORT);
284 else
285 *bptr = bus_space_read_1(sc->bt, sc->bh, offset);
286 }
287 }
288
289 static void
290 ix_copyout(struct ie_softc *sc, const void *src, int offset, size_t size)
291 {
292 int i, dribble;
293 int osize = size;
294 int ooffset = offset;
295 const uint8_t *bptr = src;
296 const uint16_t *wptr = src;
297 struct ix_softc *isc = (struct ix_softc *)sc;
298
299 if (isc->use_pio) {
300 /* Reset write pointer to the specified offset */
301 bus_space_write_2(sc->bt, sc->bh, IX_WRITEPTR, offset);
302 bus_space_barrier(sc->bt, sc->bh, IX_WRITEPTR, 2,
303 BUS_SPACE_BARRIER_WRITE);
304 }
305
306 if (offset % 2) {
307 if (isc->use_pio)
308 bus_space_write_1(sc->bt, sc->bh, IX_DATAPORT, *bptr);
309 else
310 bus_space_write_1(sc->bt, sc->bh, offset, *bptr);
311 offset++; bptr++; size--;
312 }
313
314 dribble = size % 2;
315 wptr = (const uint16_t*)bptr;
316
317 if (isc->use_pio) {
318 for (i = 0; i < size / 2; i++) {
319 bus_space_write_2(sc->bt, sc->bh, IX_DATAPORT, *wptr);
320 wptr++;
321 }
322 } else
323 bus_space_write_region_2(sc->bt, sc->bh, offset,
324 (const uint16_t *)bptr, size / 2);
325
326 if (dribble) {
327 bptr += size - 1;
328 offset += size - 1;
329
330 if (isc->use_pio)
331 bus_space_write_1(sc->bt, sc->bh, IX_DATAPORT, *bptr);
332 else
333 bus_space_write_1(sc->bt, sc->bh, offset, *bptr);
334 }
335
336 if (isc->use_pio)
337 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2,
338 BUS_SPACE_BARRIER_WRITE);
339 else
340 bus_space_barrier(sc->bt, sc->bh, ooffset, osize,
341 BUS_SPACE_BARRIER_WRITE);
342 }
343
344 static void
345 ix_bus_barrier(struct ie_softc *sc, int offset, int length, int flags)
346 {
347 struct ix_softc *isc = (struct ix_softc *)sc;
348
349 if (isc->use_pio)
350 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2, flags);
351 else
352 bus_space_barrier(sc->bt, sc->bh, offset, length, flags);
353 }
354
355 static uint16_t
356 ix_read_16(struct ie_softc *sc, int offset)
357 {
358 struct ix_softc *isc = (struct ix_softc *)sc;
359
360 if (isc->use_pio) {
361 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2,
362 BUS_SPACE_BARRIER_READ);
363
364 /* Reset read pointer to the specified offset */
365 bus_space_write_2(sc->bt, sc->bh, IX_READPTR, offset);
366 bus_space_barrier(sc->bt, sc->bh, IX_READPTR, 2,
367 BUS_SPACE_BARRIER_WRITE);
368
369 return bus_space_read_2(sc->bt, sc->bh, IX_DATAPORT);
370 } else {
371 bus_space_barrier(sc->bt, sc->bh, offset, 2,
372 BUS_SPACE_BARRIER_READ);
373 return bus_space_read_2(sc->bt, sc->bh, offset);
374 }
375 }
376
377 static void
378 ix_write_16(struct ie_softc *sc, int offset, uint16_t value)
379 {
380 struct ix_softc *isc = (struct ix_softc *)sc;
381
382 if (isc->use_pio) {
383 /* Reset write pointer to the specified offset */
384 bus_space_write_2(sc->bt, sc->bh, IX_WRITEPTR, offset);
385 bus_space_barrier(sc->bt, sc->bh, IX_WRITEPTR, 2,
386 BUS_SPACE_BARRIER_WRITE);
387
388 bus_space_write_2(sc->bt, sc->bh, IX_DATAPORT, value);
389 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2,
390 BUS_SPACE_BARRIER_WRITE);
391 } else {
392 bus_space_write_2(sc->bt, sc->bh, offset, value);
393 bus_space_barrier(sc->bt, sc->bh, offset, 2,
394 BUS_SPACE_BARRIER_WRITE);
395 }
396 }
397
398 static void
399 ix_write_24 (struct ie_softc *sc, int offset, int addr)
400 {
401 char *ptr;
402 struct ix_softc *isc = (struct ix_softc *)sc;
403 int val = addr + (u_long)sc->sc_maddr - (u_long)sc->sc_iobase;
404
405 if (isc->use_pio) {
406 /* Reset write pointer to the specified offset */
407 bus_space_write_2(sc->bt, sc->bh, IX_WRITEPTR, offset);
408 bus_space_barrier(sc->bt, sc->bh, IX_WRITEPTR, 2,
409 BUS_SPACE_BARRIER_WRITE);
410
411 ptr = (char*)&val;
412 bus_space_write_2(sc->bt, sc->bh, IX_DATAPORT,
413 *((uint16_t *)ptr));
414 bus_space_write_2(sc->bt, sc->bh, IX_DATAPORT,
415 *((uint16_t *)(ptr + 2)));
416 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2,
417 BUS_SPACE_BARRIER_WRITE);
418 } else {
419 bus_space_write_4(sc->bt, sc->bh, offset, val);
420 bus_space_barrier(sc->bt, sc->bh, offset, 4,
421 BUS_SPACE_BARRIER_WRITE);
422 }
423 }
424
425 static void
426 ix_zeromem(struct ie_softc *sc, int offset, int count)
427 {
428 int i;
429 int dribble;
430 struct ix_softc *isc = (struct ix_softc *)sc;
431
432 if (isc->use_pio) {
433 /* Reset write pointer to the specified offset */
434 bus_space_write_2(sc->bt, sc->bh, IX_WRITEPTR, offset);
435 bus_space_barrier(sc->bt, sc->bh, IX_WRITEPTR, 2,
436 BUS_SPACE_BARRIER_WRITE);
437
438 if (offset % 2) {
439 bus_space_write_1(sc->bt, sc->bh, IX_DATAPORT, 0);
440 count--;
441 }
442
443 dribble = count % 2;
444 for (i = 0; i < count / 2; i++)
445 bus_space_write_2(sc->bt, sc->bh, IX_DATAPORT, 0);
446
447 if (dribble)
448 bus_space_write_1(sc->bt, sc->bh, IX_DATAPORT, 0);
449
450 bus_space_barrier(sc->bt, sc->bh, IX_DATAPORT, 2,
451 BUS_SPACE_BARRIER_WRITE);
452 } else {
453 bus_space_set_region_1(sc->bt, sc->bh, offset, 0, count);
454 bus_space_barrier(sc->bt, sc->bh, offset, count,
455 BUS_SPACE_BARRIER_WRITE);
456 }
457 }
458
459 static void
460 ix_mediastatus(struct ie_softc *sc, struct ifmediareq *ifmr)
461 {
462 struct ifmedia *ifm = &sc->sc_media;
463
464 /* The currently selected media is always the active media. */
465 ifmr->ifm_active = ifm->ifm_cur->ifm_media;
466 }
467
468 int
469 ix_match(device_t parent, cfdata_t cf, void *aux)
470 {
471 int i;
472 int rv = 0;
473 bus_addr_t maddr;
474 bus_size_t msiz;
475 u_short checksum = 0;
476 bus_space_handle_t ioh;
477 bus_space_tag_t iot;
478 uint8_t val, bart_config;
479 uint16_t pg, adjust, decode, edecode;
480 uint16_t board_id, id_var1, id_var2, irq, irq_encoded;
481 struct isa_attach_args * const ia = aux;
482 short irq_translate[] = {0, 0x09, 0x03, 0x04, 0x05, 0x0a, 0x0b, 0};
483
484 if (ia->ia_nio < 1)
485 return 0;
486 if (ia->ia_niomem < 1)
487 return 0;
488 if (ia->ia_nirq < 1)
489 return 0;
490
491 if (ISA_DIRECT_CONFIG(ia))
492 return 0;
493
494 iot = ia->ia_iot;
495
496 if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
497 return 0;
498
499 if (bus_space_map(iot, ia->ia_io[0].ir_addr,
500 IX_IOSIZE, 0, &ioh) != 0) {
501 DPRINTF(("Can't map io space at 0x%x\n",
502 ia->ia_io[0].ir_addr));
503 return 0;
504 }
505
506 /* XXX: reset any ee16 at the current iobase */
507 bus_space_write_1(iot, ioh, IX_ECTRL, IX_RESET_ASIC);
508 bus_space_write_1(iot, ioh, IX_ECTRL, 0);
509 delay(240);
510
511 /* Now look for ee16. */
512 board_id = id_var1 = id_var2 = 0;
513 for (i = 0; i < 4 ; i++) {
514 id_var1 = bus_space_read_1(iot, ioh, IX_ID_PORT);
515 id_var2 = ((id_var1 & 0x03) << 2);
516 board_id |= (( id_var1 >> 4) << id_var2);
517 }
518
519 if (board_id != IX_ID) {
520 DPRINTF(("BART ID mismatch (got 0x%04x, expected 0x%04x)\n",
521 board_id, IX_ID));
522 goto out;
523 }
524
525 /*
526 * The shared RAM size and location of the EE16 is encoded into
527 * EEPROM location 6. The location of the first set bit tells us
528 * the memory address (0xc0000 + (0x4000 * FSB)), where FSB is the
529 * number of the first set bit. The zeroes are then shifted out,
530 * and the results is the memory size (1 = 16k, 3 = 32k, 7 = 48k,
531 * 0x0f = 64k).
532 *
533 * Examples:
534 * 0x3c -> 64k@0xc8000, 0x70 -> 48k@0xd0000, 0xc0 -> 32k@0xd8000
535 * 0x80 -> 16k@0xdc000.
536 *
537 * Side note: this comes from reading the old driver rather than
538 * from a more definitive source, so it could be out-of-whack
539 * with what the card can do...
540 */
541
542 val = ix_read_eeprom(iot, ioh, 6) & 0xff;
543 for (pg = 0; pg < 8; pg++) {
544 if (val & 1)
545 break;
546 val >>= 1;
547 }
548
549 maddr = 0xc0000 + (pg * 0x4000);
550
551 switch (val) {
552 case 0x00:
553 maddr = 0;
554 msiz = 0;
555 break;
556
557 case 0x01:
558 msiz = 16 * 1024;
559 break;
560
561 case 0x03:
562 msiz = 32 * 1024;
563 break;
564
565 case 0x07:
566 msiz = 48 * 1024;
567 break;
568
569 case 0x0f:
570 msiz = 64 * 1024;
571 break;
572
573 default:
574 DPRINTF(("invalid memory size %02x\n", val));
575 goto out;
576 }
577
578 if (ia->ia_iomem[0].ir_addr != ISA_UNKNOWN_IOMEM &&
579 ia->ia_iomem[0].ir_addr != maddr) {
580 DPRINTF((
581 "ix_match: memaddr of board @ 0x%x doesn't match config\n",
582 ia->ia_iomem[0].ir_addr));
583 goto out;
584 }
585
586 if (ia->ia_iomem[0].ir_size != ISA_UNKNOWN_IOSIZ &&
587 ia->ia_iomem[0].ir_size != msiz) {
588 DPRINTF((
589 "ix_match: memsize of board @ 0x%x doesn't match config\n",
590 ia->ia_iomem[0].ir_addr));
591 goto out;
592 }
593
594 /* Need to put the 586 in RESET, and leave it */
595 bus_space_write_1(iot, ioh, IX_ECTRL, IX_RESET_586);
596
597 /* Read the eeprom and checksum it, should == IX_ID */
598 for (i = 0; i < 0x40; i++)
599 checksum += ix_read_eeprom(iot, ioh, i);
600
601 if (checksum != IX_ID) {
602 DPRINTF(("checksum mismatch (got 0x%04x, expected 0x%04x\n",
603 checksum, IX_ID));
604 goto out;
605 }
606
607 /*
608 * Only do the following bit if using memory-mapped access. For
609 * boards with no mapped memory, we use PIO. We also use PIO for
610 * boards with 16K of mapped memory, as those setups don't seem
611 * to work otherwise.
612 */
613 if (msiz != 0 && msiz != 16384) {
614 /* Set board up with memory-mapping info */
615 adjust = IX_MCTRL_FMCS16 | (pg & 0x3) << 2;
616 decode = ((1 << (ia->ia_iomem[0].ir_size / 16384)) - 1) << pg;
617 edecode = ((~decode >> 4) & 0xF0) | (decode >> 8);
618
619 bus_space_write_1(iot, ioh, IX_MEMDEC, decode & 0xFF);
620 bus_space_write_1(iot, ioh, IX_MCTRL, adjust);
621 bus_space_write_1(iot, ioh, IX_MPCTRL, (~decode & 0xFF));
622
623 /* XXX disable Exxx */
624 bus_space_write_1(iot, ioh, IX_MECTRL, edecode);
625 }
626
627 /*
628 * Get the encoded interrupt number from the EEPROM, check it
629 * against the passed in IRQ. Issue a warning if they do not
630 * match, and fail the probe. If irq is 'ISA_UNKNOWN_IRQ' then we
631 * use the EEPROM irq, and continue.
632 */
633 irq_encoded = ix_read_eeprom(iot, ioh, IX_EEPROM_CONFIG1);
634 irq_encoded = (irq_encoded & IX_EEPROM_IRQ) >> IX_EEPROM_IRQ_SHIFT;
635 irq = irq_translate[irq_encoded];
636 if (ia->ia_irq[0].ir_irq != ISA_UNKNOWN_IRQ &&
637 irq != ia->ia_irq[0].ir_irq) {
638 DPRINTF(("board IRQ %d does not match config\n", irq));
639 goto out;
640 }
641
642 /* Disable the board interrupts */
643 bus_space_write_1(iot, ioh, IX_IRQ, irq_encoded);
644
645 bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
646 bart_config |= IX_BART_LOOPBACK;
647 bart_config |= IX_BART_MCS16_TEST; /* inb doesn't get bit! */
648 bus_space_write_1(iot, ioh, IX_CONFIG, bart_config);
649 bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
650
651 bus_space_write_1(iot, ioh, IX_ECTRL, 0);
652 delay(100);
653
654 rv = 1;
655
656 ia->ia_nio = 1;
657 ia->ia_io[0].ir_size = IX_IOSIZE;
658
659 ia->ia_niomem = 1;
660 ia->ia_iomem[0].ir_addr = maddr;
661 ia->ia_iomem[0].ir_size = msiz;
662
663 ia->ia_nirq = 1;
664 ia->ia_irq[0].ir_irq = irq;
665
666 DPRINTF(("ix_match: found board @ 0x%x\n", ia->ia_iomem[0].ir_addr));
667
668 out:
669 bus_space_unmap(iot, ioh, IX_IOSIZE);
670 return rv;
671 }
672
673 static void
674 ix_attach(device_t parent, device_t self, void *aux)
675 {
676 struct ix_softc *isc = device_private(self);
677 struct ie_softc *sc = &isc->sc_ie;
678 struct isa_attach_args *ia = aux;
679
680 int media;
681 int i, memsize;
682 uint8_t bart_config;
683 bus_space_tag_t iot;
684 uint8_t bpat, bval;
685 uint16_t wpat, wval;
686 bus_space_handle_t ioh, memh;
687 uint16_t irq_encoded;
688 uint8_t ethaddr[ETHER_ADDR_LEN];
689
690 sc->sc_dev = self;
691 iot = ia->ia_iot;
692
693 /*
694 * Shared memory access seems to fail on 16K mapped boards, so
695 * disable shared memory access if the board is in 16K mode. If
696 * no memory is mapped, we have no choice but to use PIO
697 */
698 isc->use_pio = (ia->ia_iomem[0].ir_size <= (16 * 1024));
699
700 if (bus_space_map(iot, ia->ia_io[0].ir_addr,
701 ia->ia_io[0].ir_size, 0, &ioh) != 0) {
702
703 DPRINTF(("\n%s: can't map i/o space 0x%x-0x%x\n",
704 device_xname(self), ia->ia_io[0].ir_addr,
705 ia->ia_io[0].ir_addr + ia->ia_io[0].ir_size - 1));
706 return;
707 }
708
709 /* We map memory even if using PIO so something else doesn't grab it */
710 if (ia->ia_iomem[0].ir_size) {
711 if (bus_space_map(ia->ia_memt, ia->ia_iomem[0].ir_addr,
712 ia->ia_iomem[0].ir_size, 0, &memh) != 0) {
713 DPRINTF(("\n%s: can't map iomem space 0x%x-0x%x\n",
714 device_xname(self), ia->ia_iomem[0].ir_addr,
715 ia->ia_iomem[0].ir_addr
716 + ia->ia_iomem[0].ir_size - 1));
717 bus_space_unmap(iot, ioh, ia->ia_io[0].ir_size);
718 return;
719 }
720 }
721
722 isc->sc_regt = iot;
723 isc->sc_regh = ioh;
724
725 /*
726 * Get the hardware ethernet address from the EEPROM and
727 * save it in the softc for use by the 586 setup code.
728 */
729 wval = ix_read_eeprom(iot, ioh, IX_EEPROM_ENET_HIGH);
730 ethaddr[1] = wval & 0xFF;
731 ethaddr[0] = wval >> 8;
732 wval = ix_read_eeprom(iot, ioh, IX_EEPROM_ENET_MID);
733 ethaddr[3] = wval & 0xFF;
734 ethaddr[2] = wval >> 8;
735 wval = ix_read_eeprom(iot, ioh, IX_EEPROM_ENET_LOW);
736 ethaddr[5] = wval & 0xFF;
737 ethaddr[4] = wval >> 8;
738
739 sc->hwinit = NULL;
740 sc->hwreset = ix_reset;
741 sc->chan_attn = ix_atten;
742 sc->intrhook = ix_intrhook;
743
744 sc->memcopyin = ix_copyin;
745 sc->memcopyout = ix_copyout;
746
747 /* If using PIO, make sure to setup single-byte read/write functions */
748 if (isc->use_pio) {
749 sc->ie_bus_barrier = ix_bus_barrier;
750 } else {
751 sc->ie_bus_barrier = NULL;
752 }
753
754 sc->ie_bus_read16 = ix_read_16;
755 sc->ie_bus_write16 = ix_write_16;
756 sc->ie_bus_write24 = ix_write_24;
757
758 sc->do_xmitnopchain = 0;
759
760 sc->sc_mediachange = NULL;
761 sc->sc_mediastatus = ix_mediastatus;
762
763 if (isc->use_pio) {
764 sc->bt = iot;
765 sc->bh = ioh;
766
767 /*
768 * If using PIO, the memory size is bounded by on-card memory,
769 * not by how much is mapped into the memory-mapped region, so
770 * determine how much total memory we have to play with here.
771 */
772 for (memsize = 64 * 1024; memsize; memsize -= 16 * 1024) {
773 /* warm up shared memory, the zero it all out */
774 ix_zeromem(sc, 0, 32);
775 ix_zeromem(sc, 0, memsize);
776
777 /* Reset write pointer to the start of RAM */
778 bus_space_write_2(iot, ioh, IX_WRITEPTR, 0);
779 bus_space_barrier(iot, ioh, IX_WRITEPTR, 2,
780 BUS_SPACE_BARRIER_WRITE);
781
782 /* Write test pattern */
783 for (i = 0, wpat = 1; i < memsize; i += 2) {
784 bus_space_write_2(iot, ioh, IX_DATAPORT, wpat);
785 wpat += 3;
786 }
787
788 /* Flush all reads & writes to data port */
789 bus_space_barrier(iot, ioh, IX_DATAPORT, 2,
790 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
791
792 /* Reset read pointer to beginning of card RAM */
793 bus_space_write_2(iot, ioh, IX_READPTR, 0);
794 bus_space_barrier(iot, ioh, IX_READPTR, 2,
795 BUS_SPACE_BARRIER_WRITE);
796
797 /* Read and verify test pattern */
798 for (i = 0, wpat = 1; i < memsize; i += 2) {
799 wval = bus_space_read_2(iot, ioh, IX_DATAPORT);
800
801 if (wval != wpat)
802 break;
803
804 wpat += 3;
805 }
806
807 /* If we failed, try next size down */
808 if (i != memsize)
809 continue;
810
811 /* Now try it all with byte reads/writes */
812 ix_zeromem(sc, 0, 32);
813 ix_zeromem(sc, 0, memsize);
814
815 /* Reset write pointer to start of card RAM */
816 bus_space_write_2(iot, ioh, IX_WRITEPTR, 0);
817 bus_space_barrier(iot, ioh, IX_WRITEPTR, 2,
818 BUS_SPACE_BARRIER_WRITE);
819
820 /* Write out test pattern */
821 for (i = 0, bpat = 1; i < memsize; i++) {
822 bus_space_write_1(iot, ioh, IX_DATAPORT, bpat);
823 bpat += 3;
824 }
825
826 /* Flush all reads & writes to data port */
827 bus_space_barrier(iot, ioh, IX_DATAPORT, 2,
828 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
829
830 /* Reset read pointer to beginning of card RAM */
831 bus_space_write_2(iot, ioh, IX_READPTR, 0);
832 bus_space_barrier(iot, ioh, IX_READPTR, 2,
833 BUS_SPACE_BARRIER_WRITE);
834
835 /* Read and verify test pattern */
836 for (i = 0, bpat = 1; i < memsize; i++) {
837 bval = bus_space_read_1(iot, ioh, IX_DATAPORT);
838
839 if (bval != bpat)
840 bpat += 3;
841 }
842
843 /* If we got through all of memory, we're done! */
844 if (i == memsize)
845 break;
846 }
847
848 /* Memory tests failed, punt... */
849 if (memsize == 0) {
850 DPRINTF(("\n%s: can't determine size of on-card RAM\n",
851 device_xname(self)));
852 bus_space_unmap(iot, ioh, ia->ia_io[0].ir_size);
853 return;
854 }
855
856 sc->bt = iot;
857 sc->bh = ioh;
858
859 sc->sc_msize = memsize;
860 sc->sc_maddr = (void*)0;
861 } else {
862 sc->bt = ia->ia_memt;
863 sc->bh = memh;
864
865 sc->sc_msize = ia->ia_iomem[0].ir_size;
866 sc->sc_maddr = (void *)memh;
867 }
868
869 /* Map i/o space. */
870 sc->sc_iobase = (char *)sc->sc_maddr + sc->sc_msize - (1 << 24);
871
872 /* Set up pointers to important on-card control structures */
873 sc->iscp = 0;
874 sc->scb = IE_ISCP_SZ;
875 sc->scp = sc->sc_msize + IE_SCP_ADDR - (1 << 24);
876
877 sc->buf_area = sc->scb + IE_SCB_SZ;
878 sc->buf_area_sz = sc->sc_msize - IE_ISCP_SZ - IE_SCB_SZ - IE_SCP_SZ;
879
880 /* Zero card memory */
881 ix_zeromem(sc, 0, 32);
882 ix_zeromem(sc, 0, sc->sc_msize);
883
884 /* Set card to 16-bit bus mode */
885 if (isc->use_pio) {
886 bus_space_write_2(sc->bt, sc->bh, IX_WRITEPTR,
887 IE_SCP_BUS_USE((u_long)sc->scp));
888 bus_space_barrier(sc->bt, sc->bh, IX_WRITEPTR, 2,
889 BUS_SPACE_BARRIER_WRITE);
890
891 bus_space_write_1(sc->bt, sc->bh, IX_DATAPORT,
892 IE_SYSBUS_16BIT);
893 } else
894 bus_space_write_1(sc->bt, sc->bh,
895 IE_SCP_BUS_USE((u_long)sc->scp), IE_SYSBUS_16BIT);
896
897 /* Set up pointers to key structures */
898 ix_write_24(sc, IE_SCP_ISCP((u_long)sc->scp), (u_long)sc->iscp);
899 ix_write_16(sc, IE_ISCP_SCB((u_long)sc->iscp), (u_long)sc->scb);
900 ix_write_24(sc, IE_ISCP_BASE((u_long)sc->iscp), (u_long)sc->iscp);
901
902 /* Flush setup of pointers, check if chip answers */
903 if (isc->use_pio) {
904 bus_space_barrier(sc->bt, sc->bh, 0, IX_IOSIZE,
905 BUS_SPACE_BARRIER_WRITE);
906 } else
907 bus_space_barrier(sc->bt, sc->bh, 0, sc->sc_msize,
908 BUS_SPACE_BARRIER_WRITE);
909
910 if (!i82586_proberam(sc)) {
911 DPRINTF(("\n%s: Can't talk to i82586!\n",
912 device_xname(self)));
913 bus_space_unmap(iot, ioh, ia->ia_io[0].ir_size);
914
915 if (ia->ia_iomem[0].ir_size)
916 bus_space_unmap(ia->ia_memt, memh,
917 ia->ia_iomem[0].ir_size);
918 return;
919 }
920
921 /* Figure out which media is being used... */
922 if (ix_read_eeprom(iot, ioh, IX_EEPROM_CONFIG1) &
923 IX_EEPROM_MEDIA_EXT) {
924 if (ix_read_eeprom(iot, ioh, IX_EEPROM_MEDIA) &
925 IX_EEPROM_MEDIA_TP)
926 media = IFM_ETHER | IFM_10_T;
927 else
928 media = IFM_ETHER | IFM_10_2;
929 } else
930 media = IFM_ETHER | IFM_10_5;
931
932 /* Take the card out of lookback */
933 bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
934 bart_config &= ~IX_BART_LOOPBACK;
935 bart_config |= IX_BART_MCS16_TEST; /* inb doesn't get bit! */
936 bus_space_write_1(iot, ioh, IX_CONFIG, bart_config);
937 bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
938
939 irq_encoded = ix_read_eeprom(iot, ioh, IX_EEPROM_CONFIG1);
940 irq_encoded = (irq_encoded & IX_EEPROM_IRQ) >> IX_EEPROM_IRQ_SHIFT;
941
942 /* Enable interrupts */
943 bus_space_write_1(iot, ioh, IX_IRQ, irq_encoded | IX_IRQ_ENABLE);
944
945 /* Flush all writes to registers */
946 bus_space_barrier(iot, ioh, 0, ia->ia_io[0].ir_size,
947 BUS_SPACE_BARRIER_WRITE);
948
949 isc->irq_encoded = irq_encoded;
950
951 i82586_attach(sc, "EtherExpress/16", ethaddr,
952 ix_media, NIX_MEDIA, media);
953
954 if (isc->use_pio)
955 aprint_error_dev(self, "unsupported memory config, using PIO "
956 "to access %d bytes of memory\n", sc->sc_msize);
957
958 isc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq[0].ir_irq,
959 IST_EDGE, IPL_NET, i82586_intr, sc);
960 if (isc->sc_ih == NULL) {
961 DPRINTF(("\n%s: can't establish interrupt\n",
962 device_xname(self)));
963 }
964 }
965
966 CFATTACH_DECL_NEW(ix, sizeof(struct ix_softc),
967 ix_match, ix_attach, NULL, NULL);
968