xref: /src/sys/dev/isa/sb.c

/*	$NetBSD: sb.c,v 1.10 1994/10/27 04:18:12 cgd Exp $	*/

/*
 * Copyright (c) 1991-1993 Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the Computer Systems
 *	Engineering Group at Lawrence Berkeley Laboratory.
 * 4. Neither the name of the University nor of the Laboratory may be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/syslog.h>
#include <sys/device.h>

#include <machine/cpu.h>
#include <machine/pio.h>

#include <i386/isa/isavar.h>
#include <i386/isa/dmavar.h>
#include <i386/isa/icu.h>

#include "sbreg.h"

/*
 * Software state, per SoundBlaster card.
 * The soundblaster has multiple functionality, which we must demultiplex.
 * One approach is to have one major device number for the soundblaster card,
 * and use different minor numbers to indicate which hardware function
 * we want.  This would make for one large driver.  Instead our approach
 * is to partition the design into a set of drivers that share an underlying
 * piece of hardware.  Most things are hard to share, for example, the audio
 * and midi ports.  For audio, we might want to mix two processes' signals,
 * and for midi we might want to merge streams (this is hard due to
 * running status).  Moreover, we should be able to re-use the high-level
 * modules with other kinds of hardware.  In this module, we only handle the
 * most basic communications with the sb card.
 */
struct sb_softc {
	struct device sc_dev;		/* base device */
	struct isadev sc_id;		/* ISA device */
	struct intrhand sc_ih;		/* interrupt vectoring */

	u_short	sc_open;		/* reference count of open calls */
	u_short sc_dmachan;		/* dma channel */
	u_short	sc_locked;		/* true when doing HS DMA  */
	u_short	sc_iobase;		/* I/O port base address */
 	u_short	sc_adacmode;		/* low/high speed mode indicator */
#define SB_ADAC_LS 0
#define SB_ADAC_HS 1
 	u_short	sc_adactc;		/* current adac time constant */
	u_long	sc_interrupts;		/* number of interrupts taken */
	void	(*sc_intr)(void*);	/* dma completion intr handler */
	void	(*sc_mintr)(void*, int);/* midi input intr handler */
	void	*sc_arg;		/* arg for sc_intr() */
};

int sbreset __P((struct sb_softc *));
void sb_spkron __P((struct sb_softc *));
void sb_spkroff __P((struct sb_softc *));

static int wdsp(u_short iobase, int v);
static int rdsp(u_short iobase);

#define splsb splhigh		/* XXX */
struct sb_softc *sb_softc;	/* XXX */

#ifndef NEWCONFIG
#define at_dma(flags, ptr, cc, chan)	isa_dmastart(flags, ptr, cc, chan)
#endif

struct {
	int wdsp;
	int rdsp;
	int wmidi;
} sberr;

int	sbintr __P((struct sb_softc *));
int	sbprobe();
void	sbattach();
#ifdef NEWCONFIG
void	sbforceintr(void *);
#endif

struct cfdriver sbcd = {
	NULL, "sb", sbprobe, sbattach, DV_DULL, sizeof(struct sb_softc)
};

int
sbprobe(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	register struct sb_softc *sc = (void *)self;
	register struct isa_attach_args *ia = aux;
	register u_short iobase = ia->ia_iobase;

	if (!SB_BASE_VALID(ia->ia_iobase)) {
		printf("sb: configured iobase %d invalid\n", ia->ia_iobase);
		return 0;
	}
	sc->sc_iobase = iobase;
	if (sbreset(sc) < 0) {
		printf("sb: couldn't reset card\n");
		return 0;
	}
	/*
	 * Cannot auto-discover DMA channel.
	 */
	if (!SB_DRQ_VALID(ia->ia_drq)) {
		printf("sb: configured dma chan %d invalid\n", ia->ia_drq);
		return 0;
	}
#ifdef NEWCONFIG
	/*
	 * If the IRQ wasn't compiled in, auto-detect it.
	 */
	if (ia->ia_irq == IRQUNK) {
		ia->ia_irq = isa_discoverintr(sbforceintr, aux);
		sbreset(iobase);
		if (!SB_IRQ_VALID(ia->ia_irq)) {
			printf("sb: couldn't auto-detect interrupt");
			return 0;
		}
	} else
#endif
	if (!SB_IRQ_VALID(ia->ia_irq)) {
		int irq = ffs(ia->ia_irq) - 1;
		printf("sb: configured irq %d invalid\n", irq);
		return 0;
	}
	ia->ia_iosize = SB_NPORT;
	return 1;
}

#ifdef NEWCONFIG
void
sbforceintr(aux)
	void *aux;
{
	static char dmabuf;
	struct isa_attach_args *ia = aux;
	u_short iobase = ia->ia_iobase;

	/*
	 * Set up a DMA read of one byte.
	 * XXX Note that at this point we haven't called
	 * at_setup_dmachan().  This is okay because it just
	 * allocates a buffer in case it needs to make a copy,
	 * and it won't need to make a copy for a 1 byte buffer.
	 * (I think that calling at_setup_dmachan() should be optional;
	 * if you don't call it, it will be called the first time
	 * it is needed (and you pay the latency).  Also, you might
	 * never need the buffer anyway.)
	 */
	at_dma(1, &dmabuf, 1, ia->ia_drq);
	if (wdsp(iobase, SB_DSP_RDMA) == 0) {
		(void)wdsp(iobase, 0);
		(void)wdsp(iobase, 0);
	}
}
#endif

void
sbattach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	register struct sb_softc *sc = (struct sb_softc *)self;
	struct isa_attach_args *ia = (struct isa_attach_args *)aux;
	register u_short iobase = ia->ia_iobase;
	register int vers;

	/* XXX */
	sb_softc = sc;

	sc->sc_iobase = iobase;
	sc->sc_dmachan = ia->ia_drq;
	sc->sc_locked = 0;

#ifdef NEWCONFIG
	isa_establish(&sc->sc_id, &sc->sc_dev);
#endif
	sc->sc_ih.ih_fun = sbintr;
	sc->sc_ih.ih_arg = sc;
	sc->sc_ih.ih_level = IPL_BIO;
	intr_establish(ia->ia_irq, &sc->sc_ih);

#ifdef NEWCONFIG
	/*
	 * We limit DMA transfers to a page, and use the generic DMA handling
	 * code in isa.c.  This code can end up copying a buffer, but since
	 * the audio driver uses relative small buffers this isn't likely.
	 *
	 * This allocation scheme means that the maximum transfer is limited
	 * by the page size (rather than 64k).  This is reasonable.  For 4K
	 * pages, the transfer time at 48KHz is 4096 / 48000 = 85ms.  This
	 * is plenty long enough to amortize any fixed time overhead.
	 */
	at_setup_dmachan(sc->sc_dmachan, NBPG);
#endif

	vers = sbversion(sc);
	printf(": dsp v%d.%d\n", vers >> 8, vers & 0xff);
}

#define	SBUNIT(x)		(minor(x) & 0xf)

struct sb_softc *
sbopen()
{
	/* XXXX */
	struct sb_softc *sc = sb_softc;

	if (sc == 0)
		return 0;

	if (sc->sc_open == 0 && sbreset(sc) == 0) {
		sc->sc_open = 1;
		sc->sc_mintr = 0;
		sc->sc_intr = 0;
		return sc;
	}
	return 0;
}

void
sbclose(sc)
	struct sb_softc *sc;
{

	sc->sc_open = 0;
	sb_spkroff(sc);
	sc->sc_intr = 0;
	sc->sc_mintr = 0;
	/* XXX this will turn off any dma */
	sbreset(sc);
}

/*
 * Write a byte to the dsp.
 * XXX We are at the mercy of the card as we use a
 * polling loop and wait until it can take the byte.
 */
static int
wdsp(u_short iobase, int v)
{
	register int i;

	for (i = 100; --i >= 0; ) {
		if ((inb(iobase + SBP_DSP_WSTAT) & SB_DSP_BUSY) != 0)
			continue;
		outb(iobase + SBP_DSP_WRITE, v);
		return 0;
	}
	++sberr.wdsp;
	return -1;
}

/*
 * Read a byte from the DSP, using polling.
 */
int
rdsp(u_short iobase)
{
	register int i;

	for (i = 100; --i >= 0; ) {
		if ((inb(iobase + SBP_DSP_RSTAT) & SB_DSP_READY) == 0)
			continue;
		return inb(iobase + SBP_DSP_READ);
	}
	++sberr.rdsp;
	return -1;
}

/*
 * Reset the card.
 * Return non-zero if the card isn't detected.
 */
int
sbreset(sc)
	struct sb_softc *sc;
{
	register u_short iobase = sc->sc_iobase;
	register int i;

	/*
	 * See SBK, section 11.3.
	 * We pulse a reset signal into the card.
	 * Gee, what a brilliant hardware design.
	 */
	outb(iobase + SBP_DSP_RESET, 1);
	delay(3);
	outb(iobase + SBP_DSP_RESET, 0);
	if (rdsp(iobase) != SB_MAGIC)
		return -1;
	return 0;
}

/*
 * Turn on the speaker.  The SBK documention says this operation
 * can take up to 1/10 of a second.  Higher level layers should
 * probably let the task sleep for this amount of time after
 * calling here.  Otherwise, things might not work (because
 * wdsp() and rdsp() will probably timeout.)
 *
 * These engineers had their heads up their ass when
 * they designed this card.
 */
void
sb_spkron(sc)
	struct sb_softc *sc;
{

	(void)wdsp(sc->sc_iobase, SB_DSP_SPKR_ON);
	/* XXX bogus */
	delay(1000);
}

/*
 * Turn off the speaker; see comment above.
 */
void
sb_spkroff(sc)
	struct sb_softc *sc;
{

	(void)wdsp(sc->sc_iobase, SB_DSP_SPKR_OFF);
}

/*
 * Read the version number out of the card.  Return major code
 * in high byte, and minor code in low byte.
 */
int
sbversion(sc)
	struct sb_softc *sc;
{
	register u_short iobase = sc->sc_iobase;
	int v;

	if (wdsp(iobase, SB_DSP_VERSION) < 0)
		return 0;
	v = rdsp(iobase) << 8;
	v |= rdsp(iobase);
	return ((v >= 0) ? v : 0);
}

/*
 * Halt a DMA in progress.  A low-speed transfer can be
 * resumed with sb_contdma().
 */
void
sb_haltdma(sc)
	struct sb_softc *sc;
{

	if (sc->sc_locked)
		sbreset(sc);
	else
		(void)wdsp(sc->sc_iobase, SB_DSP_HALT);
}

void
sb_contdma(sc)
	struct sb_softc *sc;
{

	(void)wdsp(sc->sc_iobase, SB_DSP_CONT);
}

/*
 * Time constant routines follow.  See SBK, section 12.
 * Although they don't come out and say it (in the docs),
 * the card clearly uses a 1MHz countdown timer, as the
 * low-speed formula (p. 12-4) is:
 *	tc = 256 - 10^6 / sr
 * In high-speed mode, the constant is the upper byte of a 16-bit counter,
 * and a 256MHz clock is used:
 *	tc = 65536 - 256 * 10^ 6 / sr
 * Since we can only use the upper byte of the HS TC, the two formulae
 * are equivalent.  (Why didn't they say so?)  E.g.,
 * 	(65536 - 256 * 10 ^ 6 / x) >> 8 = 256 - 10^6 / x
 *
 * The crossover point (from low- to high-speed modes) is different
 * for the SBPRO and SB20.  The table on p. 12-5 gives the following data:
 *
 *				SBPRO			SB20
 *				-----			--------
 * input ls min			4	KHz		4	HJz
 * input ls max			23	KHz		13	KHz
 * input hs max			44.1	KHz		15	KHz
 * output ls min		4	KHz		4	KHz
 * output ls max		23	KHz		23	KHz
 * output hs max		44.1	KHz		44.1	KHz
 */
#define SB_LS_MIN	0x06	/* 4000 Hz */
#ifdef SBPRO
#define SB_ADC_LS_MAX	0xd4	/* 22727 Hz */
#define SB_ADC_HS_MAX	0xe9	/* 43478 Hz */
#else
#define SB_ADC_LS_MAX	0xb3	/* 12987 Hz */
#define SB_ADC_HS_MAX	0xbd	/* 14925 Hz */
#endif
#define SB_DAC_LS_MAX	0xd4	/* 22727 Hz */
#define SB_DAC_HS_MAX	0xe9	/* 43478 Hz */

/*
 * Convert a linear sampling rate into the DAC time constant.
 * Set *mode to indicate the high/low-speed DMA operation.
 * Because of limitations of the card, not all rates are possible.
 * We return the time constant of the closest possible rate.
 * The sampling rate limits are different for the DAC and ADC,
 * so isdac indicates output, and !isdac indicates input.
 */
int
sb_srtotc(sr, mode, isdac)
	int sr;
	int *mode;
	int isdac;
{
	register int tc = 256 - 1000000 / sr;

	if (tc < SB_LS_MIN) {
		tc = SB_LS_MIN;
		*mode = SB_ADAC_LS;
	} else if (isdac) {
		if (tc < SB_DAC_LS_MAX)
			*mode = SB_ADAC_LS;
		else {
			*mode = SB_ADAC_HS;
			if (tc > SB_DAC_HS_MAX)
				tc = SB_DAC_HS_MAX;
		}
	} else {
		if (tc < SB_ADC_LS_MAX)
			*mode = SB_ADAC_LS;
		else {
			*mode = SB_ADAC_HS;
			if (tc > SB_ADC_HS_MAX)
				tc = SB_ADC_HS_MAX;
		}
	}
	return tc;
}

/*
 * Convert a DAC time constant to a sampling rate.
 * See SBK, section 12.
 */
int
sb_tctosr(tc)
	int tc;
{
	return (1000000 / (256 - tc));
}

int
sb_set_sr(sc, sr, isdac)
	register struct sb_softc *sc;
	u_long *sr;
	int isdac;
{
	register int tc;
	int mode;

	tc = sb_srtotc(*sr, &mode, isdac);
	if (wdsp(sc->sc_iobase, SB_DSP_TIMECONST) < 0 ||
	    wdsp(sc->sc_iobase, tc) < 0)
		return -1;

	*sr = sb_tctosr(tc);
	sc->sc_adacmode = mode;
	sc->sc_adactc = tc;

	return 0;
}

int
sb_round_sr(sr, isdac)
	u_long sr;
	int isdac;
{
	int mode, tc;

	tc = sb_srtotc(sr, &mode, isdac);
	return sb_tctosr(tc);
}

int
sb_dma_input(sc, p, cc, intr, arg)
	struct sb_softc *sc;
	void *p;
	int cc;
	void (*intr)();
	void *arg;
{
	register u_short iobase;

	at_dma(1, p, cc, sc->sc_dmachan);
	sc->sc_intr = intr;
	sc->sc_arg = arg;
	iobase = sc->sc_iobase;
	--cc;
	if (sc->sc_adacmode == SB_ADAC_LS) {
		if (wdsp(iobase, SB_DSP_RDMA) < 0 ||
		    wdsp(iobase, cc) < 0 ||
		    wdsp(iobase, cc >> 8) < 0) {
			sbreset(sc);
			return EIO;
		}
	} else {
		if (wdsp(iobase, SB_DSP_BLOCKSIZE) < 0 ||
		    wdsp(iobase, cc) < 0 ||
		    wdsp(iobase, cc >> 8) < 0 ||
		    wdsp(iobase, SB_DSP_HS_INPUT) < 0) {
			sbreset(sc);
			return EIO;
		}
		sc->sc_locked = 1;
	}
	return 0;
}

int
sb_dma_output(sc, p, cc, intr, arg)
	struct sb_softc *sc;
	void *p;
	int cc;
	void (*intr)();
	void *arg;
{
	register u_short iobase;

	at_dma(0, p, cc, sc->sc_dmachan);
	sc->sc_intr = intr;
	sc->sc_arg = arg;
	iobase = sc->sc_iobase;
	--cc;
	if (sc->sc_adacmode == SB_ADAC_LS) {
		if (wdsp(iobase, SB_DSP_WDMA) < 0 ||
		    wdsp(iobase, cc) < 0 ||
		    wdsp(iobase, cc >> 8) < 0) {
			sbreset(sc);
			return EIO;
		}
	} else {
		if (wdsp(iobase, SB_DSP_BLOCKSIZE) < 0 ||
		    wdsp(iobase, cc) < 0 ||
		    wdsp(iobase, cc >> 8) < 0 ||
		    wdsp(iobase, SB_DSP_HS_OUTPUT) < 0) {
			sbreset(sc);
			return EIO;
		}
		sc->sc_locked = 1;
	}
	return 0;
}

/*
 * Only the DSP unit on the sound blaster generates interrupts.
 * There are three cases of interrupt: reception of a midi byte
 * (when mode is enabled), completion of dma transmission, or
 * completion of a dma reception.  The three modes are mutually
 * exclusive so we know a priori which event has occurred.
 */
int
sbintr(sc)
	register struct sb_softc *sc;
{

	sc->sc_locked = 0;
	/* clear interrupt */
	inb(sc->sc_iobase + SBP_DSP_RSTAT);
	if (sc->sc_mintr != 0) {
		int c = rdsp(sc->sc_iobase);
		(*sc->sc_mintr)(sc->sc_arg, c);
	} else if (sc->sc_intr != 0)
		(*sc->sc_intr)(sc->sc_arg);
	else
		return 0;
	return 1;
}

/*
 * Enter midi uart mode and arrange for read interrupts
 * to vector to `intr'.  This puts the card in a mode
 * which allows only midi I/O; the card must be reset
 * to leave this mode.  Unfortunately, the card does not
 * use transmit interrupts, so bytes must be output
 * using polling.  To keep the polling overhead to a
 * minimum, output should be driven off a timer.
 * This is a little tricky since only 320us separate
 * consecutive midi bytes.
 */
void
sb_set_midi_mode(sc, intr, arg)
	struct sb_softc *sc;
	void (*intr)();
	void *arg;
{

	wdsp(sc->sc_iobase, SB_MIDI_UART_INTR);
	sc->sc_mintr = intr;
	sc->sc_intr = 0;
	sc->sc_arg = arg;
}

/*
 * Write a byte to the midi port, when in midi uart mode.
 */
void
sb_midi_output(sc, v)
	struct sb_softc *sc;
	int v;
{

	if (wdsp(sc->sc_iobase, v) < 0)
		++sberr.wmidi;
}