smsc.c revision 1.8
1 /* $NetBSD: smsc.c,v 1.8 2008/04/28 20:23:52 martin Exp $ */ 2 3 /*- 4 * Copyright (c) 2007 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Brett Lymn. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * This is a driver for the Standard Microsystems Corp (SMSC) 34 * LPC47B397 "super i/o" chip. This driver only handles the environment 35 * monitoring capabilities of the chip, the other functions will be 36 * probed/matched as "normal" PC hardware devices (serial ports, fdc, so on). 37 * SMSC has not deigned to release a datasheet for this particular chip 38 * (though they do for others they make) so this driver was written from 39 * information contained in the comment block for the Linux driver. 40 */ 41 42 #include <sys/cdefs.h> 43 __KERNEL_RCSID(0, "$NetBSD: smsc.c,v 1.8 2008/04/28 20:23:52 martin Exp $"); 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/device.h> 48 #include <sys/bus.h> 49 50 #include <dev/isa/isareg.h> 51 #include <dev/isa/isavar.h> 52 53 #include <dev/sysmon/sysmonvar.h> 54 #include <dev/isa/smscvar.h> 55 56 #if defined(LMDEBUG) 57 #define DPRINTF(x) do { printf x; } while (0) 58 #else 59 #define DPRINTF(x) 60 #endif 61 62 static int smsc_match(device_t, cfdata_t, void *); 63 static void smsc_attach(device_t, device_t, void *); 64 static int smsc_detach(device_t, int); 65 66 static uint8_t smsc_readreg(bus_space_tag_t, bus_space_handle_t, int); 67 static void smsc_writereg(bus_space_tag_t, bus_space_handle_t, int, int); 68 69 static void smsc_refresh(struct sysmon_envsys *, envsys_data_t *); 70 71 CFATTACH_DECL_NEW(smsc, sizeof(struct smsc_softc), 72 smsc_match, smsc_attach, smsc_detach, NULL); 73 74 /* 75 * Probe for the SMSC Super I/O chip 76 */ 77 static int 78 smsc_match(device_t parent, cfdata_t match, void *aux) 79 { 80 bus_space_handle_t ioh; 81 struct isa_attach_args *ia = aux; 82 int rv; 83 uint8_t cr; 84 85 /* Must supply an address */ 86 if (ia->ia_nio < 1) 87 return 0; 88 89 if (ISA_DIRECT_CONFIG(ia)) 90 return 0; 91 92 if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT) 93 return 0; 94 95 if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0, &ioh)) 96 return 0; 97 98 /* To get the device ID we must enter config mode... */ 99 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_START); 100 101 /* Then select the device id register */ 102 cr = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_ID); 103 104 /* Exit config mode, apparently this is important to do */ 105 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_END); 106 107 switch (cr) { 108 case SMSC_ID_47B397: 109 case SMSC_ID_SCH5307NS: 110 case SMSC_ID_SCH5317: 111 rv = 1; 112 break; 113 default: 114 rv = 0; 115 break; 116 } 117 118 DPRINTF(("smsc: rv = %d, cr = %x\n", rv, cr)); 119 120 bus_space_unmap(ia->ia_iot, ioh, 2); 121 122 if (rv) { 123 ia->ia_nio = 1; 124 ia->ia_io[0].ir_size = 2; 125 126 ia->ia_niomem = 0; 127 ia->ia_nirq = 0; 128 ia->ia_ndrq = 0; 129 } 130 131 return rv; 132 } 133 134 /* 135 * Get the base address for the monitoring registers and set up the 136 * sysmon_envsys(9) framework. 137 */ 138 static void 139 smsc_attach(device_t parent, device_t self, void *aux) 140 { 141 struct smsc_softc *sc = device_private(self); 142 struct isa_attach_args *ia = aux; 143 bus_space_handle_t ioh; 144 uint8_t rev, msb, lsb, chipid; 145 unsigned address; 146 int i; 147 148 sc->sc_iot = ia->ia_iot; 149 150 aprint_naive("\n"); 151 152 /* 153 * To attach we need to find the actual Hardware Monitor 154 * I/O address space. 155 */ 156 if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0, 157 &ioh)) { 158 aprint_error(": can't map base i/o space\n"); 159 return; 160 } 161 162 /* Enter config mode */ 163 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_START); 164 165 /* 166 * While we have the base registers mapped, grab the chip 167 * revision and device ID. 168 */ 169 rev = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_REVISION); 170 chipid = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_ID); 171 172 /* Select the Hardware Monitor LDN */ 173 smsc_writereg(ia->ia_iot, ioh, SMSC_LOGICAL_DEV_SEL, 174 SMSC_LOGICAL_DEVICE); 175 176 /* Read the base address for the registers. */ 177 msb = smsc_readreg(ia->ia_iot, ioh, SMSC_IO_BASE_MSB); 178 lsb = smsc_readreg(ia->ia_iot, ioh, SMSC_IO_BASE_LSB); 179 address = (msb << 8) | lsb; 180 181 /* Exit config mode */ 182 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_END); 183 bus_space_unmap(ia->ia_iot, ioh, 2); 184 185 /* Map the Hardware Monitor I/O space. */ 186 if (bus_space_map(ia->ia_iot, address, 2, 0, &sc->sc_ioh)) { 187 aprint_error(": can't map register i/o space\n"); 188 return; 189 } 190 191 sc->sc_sme = sysmon_envsys_create(); 192 193 #define INITSENSOR(index, string, reg, type) \ 194 do { \ 195 strlcpy(sc->sc_sensor[index].desc, string, \ 196 sizeof(sc->sc_sensor[index].desc)); \ 197 sc->sc_sensor[index].units = type; \ 198 sc->sc_regs[index] = reg; \ 199 sc->sc_sensor[index].state = ENVSYS_SVALID; \ 200 } while (/* CONSTCOND */ 0) 201 202 /* Temperature sensors */ 203 INITSENSOR(0, "Temp0", SMSC_TEMP1, ENVSYS_STEMP); 204 INITSENSOR(1, "Temp1", SMSC_TEMP2, ENVSYS_STEMP); 205 INITSENSOR(2, "Temp2", SMSC_TEMP3, ENVSYS_STEMP); 206 INITSENSOR(3, "Temp3", SMSC_TEMP4, ENVSYS_STEMP); 207 208 /* Fan sensors */ 209 INITSENSOR(4, "Fan0", SMSC_FAN1_LSB, ENVSYS_SFANRPM); 210 INITSENSOR(5, "Fan1", SMSC_FAN2_LSB, ENVSYS_SFANRPM); 211 INITSENSOR(6, "Fan2", SMSC_FAN3_LSB, ENVSYS_SFANRPM); 212 INITSENSOR(7, "Fan3", SMSC_FAN4_LSB, ENVSYS_SFANRPM); 213 214 for (i = 0; i < SMSC_MAX_SENSORS; i++) { 215 if (sysmon_envsys_sensor_attach(sc->sc_sme, 216 &sc->sc_sensor[i])) { 217 sysmon_envsys_destroy(sc->sc_sme); 218 bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2); 219 return; 220 } 221 } 222 223 sc->sc_sme->sme_name = device_xname(self); 224 sc->sc_sme->sme_cookie = sc; 225 sc->sc_sme->sme_refresh = smsc_refresh; 226 227 if ((i = sysmon_envsys_register(sc->sc_sme)) != 0) { 228 aprint_error(": unable to register with sysmon (%d)\n", i); 229 sysmon_envsys_destroy(sc->sc_sme); 230 bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2); 231 return; 232 } 233 234 switch (chipid) { 235 case SMSC_ID_47B397: 236 aprint_normal(": SMSC LPC47B397 Super I/O"); 237 break; 238 case SMSC_ID_SCH5307NS: 239 aprint_normal(": SMSC SCH5307-NS Super I/O"); 240 break; 241 case SMSC_ID_SCH5317: 242 aprint_normal(": SMSC SCH5317 Super I/O"); 243 break; 244 } 245 246 aprint_normal(" (rev %u)\n", rev); 247 aprint_normal_dev(self, "Hardware Monitor registers at 0x%04x\n", 248 address); 249 } 250 251 static int 252 smsc_detach(struct device *self, int flags) 253 { 254 struct smsc_softc *sc = device_private(self); 255 256 sysmon_envsys_unregister(sc->sc_sme); 257 bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2); 258 return 0; 259 } 260 261 /* 262 * Read the value of the given register 263 */ 264 static uint8_t 265 smsc_readreg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg) 266 { 267 bus_space_write_1(iot, ioh, SMSC_ADDR, reg); 268 return bus_space_read_1(iot, ioh, SMSC_DATA); 269 } 270 271 /* 272 * Write the given value to the given register. 273 */ 274 static void 275 smsc_writereg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg, int val) 276 { 277 bus_space_write_1(iot, ioh, SMSC_ADDR, reg); 278 bus_space_write_1(iot, ioh, SMSC_DATA, val); 279 } 280 281 /* convert temperature read from the chip to micro kelvin */ 282 static inline int 283 smsc_temp2muk(uint8_t t) 284 { 285 int temp=t; 286 287 return temp * 1000000 + 273150000U; 288 } 289 290 /* 291 * convert register value read from chip into rpm using: 292 * 293 * RPM = 60/(Count * 11.111us) 294 * 295 * 1/1.1111us = 90kHz 296 * 297 */ 298 static inline int 299 smsc_reg2rpm(unsigned int r) 300 { 301 unsigned long rpm; 302 303 if (r == 0x0) 304 return 0; 305 306 rpm = (90000 * 60) / ((unsigned long) r); 307 return (int) rpm; 308 } 309 310 /* min and max temperatures in uK */ 311 #define SMSC_MIN_TEMP_UK ((-127 * 1000000) + 273150000) 312 #define SMSC_MAX_TEMP_UK ((127 * 1000000) + 273150000) 313 314 /* 315 * Get the data for the requested sensor, update the sysmon structure 316 * with the retrieved value. 317 */ 318 static void 319 smsc_refresh(struct sysmon_envsys *sme, envsys_data_t *edata) 320 { 321 struct smsc_softc *sc = sme->sme_cookie; 322 int reg; 323 unsigned int rpm; 324 uint8_t msb, lsb; 325 326 reg = sc->sc_regs[edata->sensor]; 327 328 switch (edata->units) { 329 case ENVSYS_STEMP: 330 edata->value_cur = 331 smsc_temp2muk(smsc_readreg(sc->sc_iot, sc->sc_ioh, reg)); 332 break; 333 334 case ENVSYS_SFANRPM: 335 /* reading lsb first locks msb... */ 336 lsb = smsc_readreg(sc->sc_iot, sc->sc_ioh, reg); 337 msb = smsc_readreg(sc->sc_iot, sc->sc_ioh, reg + 1); 338 rpm = (msb << 8) | lsb; 339 edata->value_cur = smsc_reg2rpm(rpm); 340 break; 341 } 342 } 343
Indexes created Thu Oct 02 14:10:14 GMT 2025