xref: /src/sys/dev/mca/com_mca.c

/*	$NetBSD: com_mca.c,v 1.20.4.1 2008/05/16 02:24:33 yamt Exp $	*/

/*-
 * Copyright (c) 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Charles M. Hannum.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*-
 * Copyright (c) 1991 The Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)com.c	7.5 (Berkeley) 5/16/91
 */

/*
 * This driver attaches serial port boards and internal modems.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: com_mca.c,v 1.20.4.1 2008/05/16 02:24:33 yamt Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/select.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/device.h>

#include <sys/intr.h>
#include <sys/bus.h>

#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>

#include <dev/mca/mcavar.h>
#include <dev/mca/mcadevs.h>

struct com_mca_softc {
	struct	com_softc sc_com;	/* real "com" softc */

	/* MCA-specific goo. */
	void	*sc_ih;			/* interrupt handler */
};

int com_mca_probe(device_t, cfdata_t , void *);
void com_mca_attach(device_t, device_t, void *);

static int ibm_modem_getcfg(struct mca_attach_args *, int *, int *);
static int neocom1_getcfg(struct mca_attach_args *, int *, int *);
static int ibm_mpcom_getcfg(struct mca_attach_args *, int *, int *);

CFATTACH_DECL_NEW(com_mca, sizeof(struct com_mca_softc),
    com_mca_probe, com_mca_attach, NULL, NULL);

static const struct com_mca_product {
	u_int32_t	cp_prodid;	/* MCA product ID */
	const char	*cp_name;	/* device name */
	int (*cp_getcfg)(struct mca_attach_args *, int *iobase, int *irq);
					/* get device i/o base and irq */
} com_mca_products[] = {
	{ MCA_PRODUCT_IBM_MOD,	"IBM Internal Modem",	ibm_modem_getcfg },
	{ MCA_PRODUCT_NEOCOM1,	"NeoTecH Single RS-232 Async. Adapter, SM110",
		neocom1_getcfg },
	{ MCA_PRODUCT_IBM_MPCOM,"IBM Multi-Protocol Communications Adapter",
		ibm_mpcom_getcfg },
	{ 0,			NULL,			NULL },
};

static const struct com_mca_product *com_mca_lookup(int);

static const struct com_mca_product *
com_mca_lookup(int ma_id)
{
	const struct com_mca_product *cpp;

	for (cpp = com_mca_products; cpp->cp_name != NULL; cpp++)
		if (cpp->cp_prodid == ma_id)
			return (cpp);

	return (NULL);
}

int
com_mca_probe(device_t parent, cfdata_t match, void *aux)
{
	struct mca_attach_args *ma = aux;

	if (com_mca_lookup(ma->ma_id))
		return (1);

	return (0);
}

void
com_mca_attach(device_t parent, device_t self, void *aux)
{
	struct com_mca_softc *isc = device_private(self);
	struct com_softc *sc = &isc->sc_com;
	int iobase, irq;
	struct mca_attach_args *ma = aux;
	const struct com_mca_product *cpp;
	bus_space_handle_t ioh;

	sc->sc_dev = self;
	cpp = com_mca_lookup(ma->ma_id);

	/* get iobase and irq */
	if ((*cpp->cp_getcfg)(ma, &iobase, &irq))
		return;

	if (bus_space_map(ma->ma_iot, iobase, COM_NPORTS, 0, &ioh)) {
		aprint_error(": can't map i/o space\n");
		return;
	}

	COM_INIT_REGS(sc->sc_regs, ma->ma_iot, ioh, iobase);
	sc->sc_frequency = COM_FREQ;

	aprint_normal(" slot %d i/o %#x-%#x irq %d", ma->ma_slot + 1,
		iobase, iobase + COM_NPORTS - 1, irq);

	com_attach_subr(sc);

	aprint_normal_dev(self, "%s\n", cpp->cp_name);

	isc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_SERIAL,
			comintr, sc);
	if (isc->sc_ih == NULL) {
                aprint_error_dev(self,
		    "couldn't establish interrupt handler\n");
                return;
        }

	/*
	 * com_cleanup: shutdown hook for buggy BIOSs that don't
	 * recognize the UART without a disabled FIFO.
	 * XXX is this necessary on MCA ? --- jdolecek
	 */
	if (!pmf_device_register1(self, com_suspend, com_resume, com_cleanup))
		aprint_error_dev(self, "could not establish shutdown hook\n");
}

/* map serial_X to iobase and irq */
static const struct {
	int iobase;
	int irq;
} MCA_SERIAL[] = {
	{ 0x03f8,	4 },	/* SERIAL_1 */
	{ 0x02f8,	3 },	/* SERIAL_2 */
	{ 0x3220,	3 },	/* SERIAL_3 */
	{ 0x3228,	3 },	/* SERIAL_4 */
	{ 0x4220,	3 },	/* SERIAL_5 */
	{ 0x4228,	3 },	/* SERIAL_6 */
	{ 0x5220,	3 },	/* SERIAL_7 */
	{ 0x5228,	3 },	/* SERIAL_8 */
};

/*
 * Get config for IBM Internal Modem (ID 0xEDFF). This beast doesn't
 * seem to support even AT commands, it's good as example for adding
 * other stuff though.
 */
static int
ibm_modem_getcfg(struct mca_attach_args *ma, int *iobasep, int *irqp)
{
	int pos2;
	int snum;

	pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);

	/*
	 * POS register 2: (adf pos0)
	 * 7 6 5 4 3 2 1 0
	 *         \__/  \__ enable: 0=adapter disabled, 1=adapter enabled
	 *            \_____ Serial Configuration: XX=SERIAL_XX
	 */

	snum = (pos2 & 0x0e) >> 1;

	*iobasep = MCA_SERIAL[snum].iobase;
	*irqp = MCA_SERIAL[snum].irq;

	return (0);
}

/*
 * Get configuration for NeoTecH Single RS-232 Async. Adapter, SM110.
 */
static int
neocom1_getcfg(struct mca_attach_args *ma, int *iobasep, int *irqp)
{
	int pos2, pos3, pos4;
	static const int neotech_irq[] = { 12, 9, 4, 3 };

	pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
	pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3);
	pos4 = mca_conf_read(ma->ma_mc, ma->ma_slot, 4);

	/*
	 * POS register 2: (adf pos0)
	 * 7 6 5 4 3 2 1 0
	 *     1     \_/ \__ enable: 0=adapter disabled, 1=adapter enabled
	 *             \____ IRQ: 11=3 10=4 01=9 00=12
	 *
	 * POS register 3: (adf pos1)
	 * 7 6 5 4 3 2 1 0
	 * \______/
	 *        \_________ I/O Address: bits 7-3
	 *
	 * POS register 4: (adf pos2)
	 * 7 6 5 4 3 2 1 0
	 * \_____________/
	 *               \__ I/O Address: bits 15-8
	 */

	*iobasep = (pos4 << 8) | (pos3 & 0xf8);
	*irqp = neotech_irq[(pos2 & 0x06) >> 1];

	return (0);
}

/*
 * Get configuration for IBM Multi-Protocol Communications Adapter.
 * We only support SERIAL mode, bail out if set to SDLC or BISYNC.
 */
static int
ibm_mpcom_getcfg(struct mca_attach_args *ma, int *iobasep, int *irqp)
{
	int snum, pos2;

	pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);

	/*
	 * For SERIAL mode, bit 4 has to be 0.
	 *
	 * POS register 2: (adf pos0)
	 * 7 6 5 4 3 2 1 0
	 *       0 \__/  \__ enable: 0=adapter disabled, 1=adapter enabled
	 *            \_____ Serial Configuration: XX=SERIAL_XX
	 */

	if (pos2 & 0x10) {
		aprint_error(": not set to SERIAL mode, ignored\n");
		return (1);
	}

	snum = (pos2 & 0x0e) >> 1;

	*iobasep = MCA_SERIAL[snum].iobase;
	*irqp = MCA_SERIAL[snum].irq;

	return (0);
}