xref: /src/sys/dev/mca/esp_mca.c

/*	$NetBSD: esp_mca.c,v 1.3 2001/12/04 20:51:23 jdolecek Exp $	*/

/*-
 * Copyright (c) 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Jaromir Dolecek <jdolecek (at) NetBSD.org>.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the NetBSD
 *	Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Driver for NCR 53c90, MCA version, with 86c01 DMA controller chip.
 *
 * Some of the information used to write this driver was taken
 * from Tymm Twillman <tymm (at) computer.org>'s Linux MCA NC53c90 driver,
 * in drivers/scsi/mca_53c9x.c
 */

#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/queue.h>

#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>

#include <machine/bus.h>
#include <machine/cpu.h>

#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>

#include <dev/mca/espvar.h>
#include <dev/mca/espreg.h>

#include <dev/mca/mcavar.h>
#include <dev/mca/mcareg.h>
#include <dev/mca/mcadevs.h>

#if 0
#if defined(DEBUG) && !defined(NCR53C9X_DEBUG)
#define NCR53C9X_DEBUG
#endif
#endif

#ifdef NCR53C9X_DEBUG
static int esp_mca_debug = 0;
#define DPRINTF(x) if (esp_mca_debug) printf x;
#else
#define DPRINTF(x)
#endif

#define ESP_MCA_IOSIZE  0x20
#define ESP_REG_OFFSET	0x10

static void	esp_mca_attach	__P((struct device *, struct device *, void *));
static int	esp_mca_match	__P((struct device *, struct cfdata *, void *));

/* Linkup to the rest of the kernel */
struct cfattach esp_mca_ca = {
	sizeof(struct esp_softc), esp_mca_match, esp_mca_attach
};

/*
 * Functions and the switch for the MI code.
 */
static u_char	esp_read_reg __P((struct ncr53c9x_softc *, int));
static void	esp_write_reg __P((struct ncr53c9x_softc *, int, u_char));
static int	esp_dma_isintr __P((struct ncr53c9x_softc *));
static void	esp_dma_reset __P((struct ncr53c9x_softc *));
static int	esp_dma_intr __P((struct ncr53c9x_softc *));
static int	esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
	    size_t *, int, size_t *));
static void	esp_dma_go __P((struct ncr53c9x_softc *));
static void	esp_dma_stop __P((struct ncr53c9x_softc *));
static int	esp_dma_isactive __P((struct ncr53c9x_softc *));

static struct ncr53c9x_glue esp_glue = {
	esp_read_reg,
	esp_write_reg,
	esp_dma_isintr,
	esp_dma_reset,
	esp_dma_intr,
	esp_dma_setup,
	esp_dma_go,
	esp_dma_stop,
	esp_dma_isactive,
	NULL,			/* gl_clear_latched_intr */
};

static int
esp_mca_match(parent, cf, aux)
	struct device *parent;
	struct cfdata *cf;
	void *aux;
{
	struct mca_attach_args *ma = aux;

	switch (ma->ma_id) {
	case MCA_PRODUCT_NCR53C90:
		return 1;
	}

	return 0;
}

static void
esp_mca_attach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	struct mca_attach_args *ma = aux;
	struct esp_softc *esc = (void *)self;
	struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
	u_int16_t iobase;
	int scsi_id, irq, drq, error;
	bus_space_handle_t ioh;
	int pos2, pos3, pos5;

	static const u_int16_t ncrmca_iobase[] = {
		0, 0x240, 0x340, 0x400, 0x420, 0x3240, 0x8240, 0xa240
	};

	/*
	 * NCR SCSI Adapter (ADF 7f4f)
	 *
	 * POS register 2: (adf pos0)
	 *
	 * 7 6 5 4 3 2 1 0
	 *     \_/ \___/ \__ enable: 0=adapter disabled, 1=adapter enabled
	 *      |      \____ I/O base (32B): 001=0x240 010=0x340 011=0x400
	 *      |              100=0x420 101=0x3240 110=0x8240 111=0xa240
	 *       \__________ IRQ: 00=3 01=5 10=7 11=9
	 *
	 * POS register 3: (adf pos1)
	 *
	 * 7 6 5 4 3 2 1 0
	 * 1 1 1 | \_____/
	 *       |       \__ DMA level
	 *        \_________ Fairness: 1=enabled 0=disabled
	 *
	 * POS register 5: (adf pos3)
	 *
	 * 7 6 5 4 3 2 1 0
	 * 1   |     \___/
	 *     |         \__ Static Ram: 0xC8000-0xC87FF + XX*0x4000
	 *      \___________ Host Adapter ID: 1=7 0=6
	 */

	pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
	pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3);
	pos5 = mca_conf_read(ma->ma_mc, ma->ma_slot, 5);

	iobase = ncrmca_iobase[(pos2 & 0x0e) >> 1];
	irq = 3 + 2*((pos2 & 0x30) >> 4);
	drq = (pos3 & 0x0f);
	scsi_id = 6 + ((pos5 & 0x20) ? 1 : 0);

	printf(" slot %d irq %d drq %d: NCR SCSI Adapter\n",
		ma->ma_slot + 1, irq, drq);

	/* Map the 86C01 registers */
	if (bus_space_map(ma->ma_iot, iobase, ESP_MCA_IOSIZE, 0, &ioh)) {
		printf("%s: can't map i/o space\n", sc->sc_dev.dv_xname);
		return;
	}

	esc->sc_iot = ma->ma_iot;
	esc->sc_ioh = ioh;

	/* Submap the 'esp' registers */
	if (bus_space_subregion(ma->ma_iot, ioh, ESP_REG_OFFSET,
	    ESP_MCA_IOSIZE-ESP_REG_OFFSET, &esc->sc_esp_ioh)) {
		printf("%s: can't subregion i/o space\n", sc->sc_dev.dv_xname);
		return;
	}

	/* Setup DMA map */
	esc->sc_dmat = ma->ma_dmat;
	if ((error = mca_dmamap_create(esc->sc_dmat, MAXPHYS,
            BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW | MCABUS_DMA_IOPORT,
	    &esc->sc_xfer, drq)) != 0){
                printf("%s: couldn't create DMA map - error %d\n",
                        sc->sc_dev.dv_xname, error);
                return;
        }

	/* MI code glue */
	sc->sc_id = scsi_id;
	sc->sc_freq = 25;		/* Mhz */

	sc->sc_glue = &esp_glue;

	sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; //| NCRCFG1_SLOW;
	/* No point setting sc_cfg[2345], they won't be used */

	sc->sc_rev = NCR_VARIANT_NCR53C90_86C01;
	sc->sc_minsync = 0;

	/* max 64KB DMA */
	sc->sc_maxxfer = 64 * 1024;

	/* Establish interrupt */
	esc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_BIO, ncr53c9x_intr,
			esc);
	if (esc->sc_ih == NULL) {
		printf("%s: couldn't establish interrupt\n",
		    sc->sc_dev.dv_xname);
		return;
	}

	/*
	 * Massage the 86C01 chip - setup MCA DMA controller for DMA via
	 * the 86C01 register, and enable 86C01 interrupts.
	 */
	mca_dma_set_ioport(drq, iobase + N86C01_PIO);

	bus_space_write_1(esc->sc_iot, esc->sc_ioh, N86C01_MODE_ENABLE,
		bus_space_read_1(esc->sc_iot, esc->sc_ioh, N86C01_MODE_ENABLE)
		| N86C01_INTR_ENABLE);

	/*
	 * Now try to attach all the sub-devices
	 */
	sc->sc_adapter.adapt_minphys = minphys;
	sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request;

	/* Do the common parts of attachment. */
	printf("%s", sc->sc_dev.dv_xname);
	ncr53c9x_attach(sc);
}

/*
 * Glue functions.
 */

static u_char
esp_read_reg(sc, reg)
	struct ncr53c9x_softc *sc;
	int reg;
{
	struct esp_softc *esc = (struct esp_softc *)sc;

	return (bus_space_read_1(esc->sc_iot, esc->sc_esp_ioh, reg));
}

static void
esp_write_reg(sc, reg, val)
	struct ncr53c9x_softc *sc;
	int reg;
	u_char val;
{
	struct esp_softc *esc = (struct esp_softc *)sc;

	bus_space_write_1(esc->sc_iot, esc->sc_esp_ioh, reg, val);
}

static int
esp_dma_isintr(sc)
	struct ncr53c9x_softc *sc;
{
	struct esp_softc *esc = (struct esp_softc *)sc;

	DPRINTF(("[esp_dma_isintr] "));
	return (bus_space_read_1(esc->sc_iot, esc->sc_ioh,
		N86C01_STATUS) & N86C01_IRQ_PEND);
}

static void
esp_dma_reset(sc)
	struct ncr53c9x_softc *sc;
{
	struct esp_softc *esc = (struct esp_softc *)sc;

	DPRINTF(("[esp_dma_reset] "));

	if (esc->sc_flags & ESP_XFER_LOADED) {
		bus_dmamap_unload(esc->sc_dmat, esc->sc_xfer);
		esc->sc_flags &= ~ESP_XFER_LOADED;
	}

	if (esc->sc_flags & ESP_XFER_ACTIVE) {
		esc->sc_flags &= ~ESP_XFER_ACTIVE;
		mca_disk_unbusy();
	}
}

static int
esp_dma_intr(sc)
	struct ncr53c9x_softc *sc;
{
	struct esp_softc *esc = (struct esp_softc *) sc;
	DPRINTF(("[esp_dma_intr] "));

	if ((esc->sc_flags & ESP_XFER_ACTIVE) == 0) {
		printf("%s: dma_intr--inactive DMA\n", sc->sc_dev.dv_xname);
		return (-1);
	}

	if ((sc->sc_espintr & NCRINTR_BS) == 0) {
		esc->sc_flags &= ~ESP_XFER_ACTIVE;
		mca_disk_unbusy();
		return (0);
	}

	sc->sc_espstat |= NCRSTAT_TC;	/* XXX */

	if ((sc->sc_espstat & NCRSTAT_TC) == 0) {
		printf("%s: DMA not complete?\n", sc->sc_dev.dv_xname);
		return (1);
	}

	bus_dmamap_sync(esc->sc_dmat, esc->sc_xfer, 0,
		*esc->sc_xfer_len,
		(esc->sc_flags & ESP_XFER_READ)
			? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);

	bus_dmamap_unload(esc->sc_dmat, esc->sc_xfer);
	esc->sc_flags &= ~ESP_XFER_LOADED;

	*esc->sc_xfer_addr +=  *esc->sc_xfer_len;
	*esc->sc_xfer_len = 0;

	esc->sc_flags &= ~ESP_XFER_ACTIVE;
	mca_disk_unbusy();

	return (0);
}

/*
 * Setup DMA transfer.
 */
static int
esp_dma_setup(sc, addr, len, datain, dmasize)
	struct ncr53c9x_softc *sc;
	caddr_t *addr;
	size_t *len;
	int datain;
	size_t *dmasize;
{
	struct esp_softc *esc = (struct esp_softc *) sc;
	int error;
	int fl;

	DPRINTF(("[esp_dma_setup] "));

	if (esc->sc_flags & ESP_XFER_LOADED) {
		printf("%s: esp_dma_setup: unloading leaked xfer\n",
			sc->sc_dev.dv_xname);
		bus_dmamap_unload(esc->sc_dmat, esc->sc_xfer);
		esc->sc_flags &= ~ESP_XFER_LOADED;
	}

	/* Load the buffer for DMA transfer. */
	fl = (datain) ? BUS_DMA_READ : BUS_DMA_WRITE;

	if ((error = bus_dmamap_load(esc->sc_dmat, esc->sc_xfer, *addr,
	    *len, NULL, BUS_DMA_STREAMING|fl))) {
		printf("%s: esp_dma_setup: unable to load DMA buffer - error %d\n",
			sc->sc_dev.dv_xname, error);
		return (error);
	}

	bus_dmamap_sync(esc->sc_dmat, esc->sc_xfer, 0,
		*len, (datain) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);

	esc->sc_flags |= ESP_XFER_LOADED | (datain ? ESP_XFER_READ : 0);
	esc->sc_xfer_addr = addr;
	esc->sc_xfer_len  = len;

	return (0);
}

static void
esp_dma_go(sc)
	struct ncr53c9x_softc *sc;
{
	struct esp_softc *esc = (struct esp_softc *) sc;
	DPRINTF(("[esp_dma_go] "));

	esc->sc_flags |= ESP_XFER_ACTIVE;
	mca_disk_busy();
}

static void
esp_dma_stop(sc)
	struct ncr53c9x_softc *sc;
{
	DPRINTF(("[esp_dma_stop] "));

	panic("%s: stop not yet implemented", sc->sc_dev.dv_xname);
}

static int
esp_dma_isactive(sc)
	struct ncr53c9x_softc *sc;
{
	struct esp_softc *esc = (struct esp_softc *) sc;
	DPRINTF(("[esp_dma_isactive] "));

	return (esc->sc_flags & ESP_XFER_ACTIVE);
}