xref: /src/sys/dev/mii/brgphy.c

/*	$NetBSD: brgphy.c,v 1.60 2012/09/17 11:45:56 tsutsui Exp $	*/

/*-
 * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
 * NASA Ames Research Center.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * driver for the Broadcom BCM5400 and BCM5700 Gig-E PHYs.
 *
 * Programming information for this PHY was gleaned from FreeBSD
 * (they were apparently able to get a datasheet from Broadcom).
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: brgphy.c,v 1.60 2012/09/17 11:45:56 tsutsui Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <prop/proplib.h>

#include <net/if.h>
#include <net/if_media.h>

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/miidevs.h>
#include <dev/mii/brgphyreg.h>

#include <dev/pci/if_bgereg.h>
#include <dev/pci/if_bnxreg.h>

static int	brgphymatch(device_t, cfdata_t, void *);
static void	brgphyattach(device_t, device_t, void *);

struct brgphy_softc {
	struct mii_softc sc_mii;
	bool sc_isbge;
	bool sc_isbnx;
	uint32_t sc_chipid;    /* parent's chipid */
	uint32_t sc_phyflags;  /* parent's phyflags */
};

CFATTACH_DECL3_NEW(brgphy, sizeof(struct brgphy_softc),
    brgphymatch, brgphyattach, mii_phy_detach, mii_phy_activate, NULL, NULL,
    DVF_DETACH_SHUTDOWN);

static int	brgphy_service(struct mii_softc *, struct mii_data *, int);
static void	brgphy_status(struct mii_softc *);
static int	brgphy_mii_phy_auto(struct mii_softc *);
static void	brgphy_loop(struct mii_softc *);
static void	brgphy_reset(struct mii_softc *);
static void	brgphy_bcm5401_dspcode(struct mii_softc *);
static void	brgphy_bcm5411_dspcode(struct mii_softc *);
static void	brgphy_bcm5421_dspcode(struct mii_softc *);
static void	brgphy_bcm54k2_dspcode(struct mii_softc *);
static void	brgphy_adc_bug(struct mii_softc *);
static void	brgphy_5704_a0_bug(struct mii_softc *);
static void	brgphy_ber_bug(struct mii_softc *);
static void	brgphy_crc_bug(struct mii_softc *);
static void	brgphy_disable_early_dac(struct mii_softc *);
static void	brgphy_jumbo_settings(struct mii_softc *);
static void	brgphy_eth_wirespeed(struct mii_softc *);


static const struct mii_phy_funcs brgphy_funcs = {
	brgphy_service, brgphy_status, brgphy_reset,
};

static const struct mii_phydesc brgphys[] = {
	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5400,
	  MII_STR_BROADCOM_BCM5400 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5401,
	  MII_STR_BROADCOM_BCM5401 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5411,
	  MII_STR_BROADCOM_BCM5411 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5421,
	  MII_STR_BROADCOM_BCM5421 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5462,
	  MII_STR_BROADCOM_BCM5462 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5461,
	  MII_STR_BROADCOM_BCM5461 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM54K2,
	  MII_STR_BROADCOM_BCM54K2 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5464,
	  MII_STR_BROADCOM_BCM5464 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5701,
	  MII_STR_BROADCOM_BCM5701 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5703,
	  MII_STR_BROADCOM_BCM5703 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5704,
	  MII_STR_BROADCOM_BCM5704 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5705,
	  MII_STR_BROADCOM_BCM5705 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5714,
	  MII_STR_BROADCOM_BCM5714 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5750,
	  MII_STR_BROADCOM_BCM5750 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5752,
	  MII_STR_BROADCOM_BCM5752 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5780,
	  MII_STR_BROADCOM_BCM5780 },

	{ MII_OUI_BROADCOM,		MII_MODEL_BROADCOM_BCM5708C,
	  MII_STR_BROADCOM_BCM5708C },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5481,
	  MII_STR_BROADCOM2_BCM5481 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5482,
	  MII_STR_BROADCOM2_BCM5482 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5709C,
	  MII_STR_BROADCOM2_BCM5709C },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5709S,
	  MII_STR_BROADCOM2_BCM5709S },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5709CAX,
	  MII_STR_BROADCOM2_BCM5709CAX },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5722,
	  MII_STR_BROADCOM2_BCM5722 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5754,
	  MII_STR_BROADCOM2_BCM5754 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5755,
	  MII_STR_BROADCOM2_BCM5755 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5761,
	  MII_STR_BROADCOM2_BCM5761 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5784,
	  MII_STR_BROADCOM2_BCM5784 },

	{ MII_OUI_BROADCOM2,		MII_MODEL_BROADCOM2_BCM5785,
	  MII_STR_BROADCOM2_BCM5785 },

	{ MII_OUI_BROADCOM3,		MII_MODEL_BROADCOM3_BCM57765,
	  MII_STR_BROADCOM3_BCM57765 },

	{ MII_OUI_xxBROADCOM_ALT1,	MII_MODEL_xxBROADCOM_ALT1_BCM5906,
	  MII_STR_xxBROADCOM_ALT1_BCM5906 },

	{ 0,				0,
	  NULL },
};

static int
brgphymatch(device_t parent, cfdata_t match, void *aux)
{
	struct mii_attach_args *ma = aux;

	if (mii_phy_match(ma, brgphys) != NULL)
		return (10);

	return (0);
}

static void
brgphyattach(device_t parent, device_t self, void *aux)
{
	struct brgphy_softc *bsc = device_private(self);
	struct mii_softc *sc = &bsc->sc_mii;
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;
	prop_dictionary_t dict;

	mpd = mii_phy_match(ma, brgphys);
	aprint_naive(": Media interface\n");
	aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_dev = self;
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_mpd_model = MII_MODEL(ma->mii_id2);
	sc->mii_mpd_rev = MII_REV(ma->mii_id2);
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS;
	sc->mii_funcs = &brgphy_funcs;

	PHY_RESET(sc);

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	if (sc->mii_capabilities & BMSR_EXTSTAT)
		sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);


	if (device_is_a(parent, "bge"))
		bsc->sc_isbge = true;
	else if (device_is_a(parent, "bnx"))
		bsc->sc_isbnx = true;

	if (bsc->sc_isbge || bsc->sc_isbnx) {
		dict = device_properties(parent);
		if (!prop_dictionary_get_uint32(dict, "phyflags",
		    &bsc->sc_phyflags))
			aprint_error_dev(self, "failed to get phyflags\n");
		if (!prop_dictionary_get_uint32(dict, "chipid",
		    &bsc->sc_chipid))
			aprint_error_dev(self, "failed to get chipid\n");
	}

	aprint_normal_dev(self, "");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0 &&
	    (sc->mii_extcapabilities & EXTSR_MEDIAMASK) == 0)
		aprint_error("no media present");
	else {
		if (sc->mii_flags & MIIF_HAVEFIBER) {
			sc->mii_flags |= MIIF_NOISOLATE | MIIF_NOLOOP;

			/*
			 * Set the proper bits for capabilities so that the
			 * correct media get selected by mii_phy_add_media()
			 */
			sc->mii_capabilities |= BMSR_ANEG;
			sc->mii_capabilities &= ~BMSR_100T4;
			sc->mii_extcapabilities |= EXTSR_1000XFDX;

			if (bsc->sc_isbnx) {
				/*
				 * 2.5Gb support is a software enabled feature
				 * on the BCM5708S and BCM5709S controllers.
				 */
#define	ADD(m, c)	ifmedia_add(&mii->mii_media, (m), (c), NULL)
				if (bsc->sc_phyflags
				    & BNX_PHY_2_5G_CAPABLE_FLAG) {
					ADD(IFM_MAKEWORD(IFM_ETHER, IFM_2500_SX,
					    IFM_FDX, sc->mii_inst), 0);
					aprint_normal("2500baseSX-FDX, ");
#undef ADD
				}
			}
		}
		mii_phy_add_media(sc);
	}
	aprint_normal("\n");

}

static int
brgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
	int reg, speed, gig;

	switch (cmd) {
	case MII_POLLSTAT:
		/*
		 * If we're not polling our PHY instance, just return.
		 */
		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
			return (0);
		break;

	case MII_MEDIACHG:
		/*
		 * If the media indicates a different PHY instance,
		 * isolate ourselves.
		 */
		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
			reg = PHY_READ(sc, MII_BMCR);
			PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
			return (0);
		}

		/*
		 * If the interface is not up, don't do anything.
		 */
		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
			break;

		PHY_RESET(sc); /* XXX hardware bug work-around */

		switch (IFM_SUBTYPE(ife->ifm_media)) {
		case IFM_AUTO:
			(void) brgphy_mii_phy_auto(sc);
			break;
		case IFM_1000_T:
			speed = BMCR_S1000;
			goto setit;
		case IFM_100_TX:
			speed = BMCR_S100;
			goto setit;
		case IFM_10_T:
			speed = BMCR_S10;
setit:
			brgphy_loop(sc);
			if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) {
				speed |= BMCR_FDX;
				gig = GTCR_ADV_1000TFDX;
			} else {
				gig = GTCR_ADV_1000THDX;
			}

			PHY_WRITE(sc, MII_100T2CR, 0);
			PHY_WRITE(sc, MII_ANAR, ANAR_CSMA);
			PHY_WRITE(sc, MII_BMCR, speed);

			if (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)
				break;

			PHY_WRITE(sc, MII_100T2CR, gig);
			PHY_WRITE(sc, MII_BMCR,
			    speed|BMCR_AUTOEN|BMCR_STARTNEG);

			if (sc->mii_mpd_model != MII_MODEL_BROADCOM_BCM5701)
				break;

			if (mii->mii_media.ifm_media & IFM_ETH_MASTER)
				gig |= GTCR_MAN_MS | GTCR_ADV_MS;
			PHY_WRITE(sc, MII_100T2CR, gig);
			break;
		default:
			return (EINVAL);
		}
		break;

	case MII_TICK:
		/*
		 * If we're not currently selected, just return.
		 */
		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
			return (0);

		if (mii_phy_tick(sc) == EJUSTRETURN)
			return (0);
		break;

	case MII_DOWN:
		mii_phy_down(sc);
		return (0);
	}

	/* Update the media status. */
	mii_phy_status(sc);

	/*
	 * Callback if something changed. Note that we need to poke the DSP on
	 * the Broadcom PHYs if the media changes.
	 */
	if (sc->mii_media_active != mii->mii_media_active ||
	    sc->mii_media_status != mii->mii_media_status ||
	    cmd == MII_MEDIACHG) {
		switch (sc->mii_mpd_model) {
		case MII_MODEL_BROADCOM_BCM5400:
			brgphy_bcm5401_dspcode(sc);
			break;
		case MII_MODEL_BROADCOM_BCM5401:
			if (sc->mii_mpd_rev == 1 || sc->mii_mpd_rev == 3)
				brgphy_bcm5401_dspcode(sc);
			break;
		case MII_MODEL_BROADCOM_BCM5411:
			brgphy_bcm5411_dspcode(sc);
			break;
		}
	}

	/* Callback if something changed. */
	mii_phy_update(sc, cmd);
	return (0);
}

static void
brgphy_status(struct mii_softc *sc)
{
	struct mii_data *mii = sc->mii_pdata;
	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
	int bmcr, bmsr, auxsts, gtsr;

	mii->mii_media_status = IFM_AVALID;
	mii->mii_media_active = IFM_ETHER;

	bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
	if (bmsr & BMSR_LINK)
		mii->mii_media_status |= IFM_ACTIVE;

	bmcr = PHY_READ(sc, MII_BMCR);
	if (bmcr & BMCR_ISO) {
		mii->mii_media_active |= IFM_NONE;
		mii->mii_media_status = 0;
		return;
	}

	if (bmcr & BMCR_LOOP)
		mii->mii_media_active |= IFM_LOOP;

	if (bmcr & BMCR_AUTOEN) {
		/*
		 * The media status bits are only valid of autonegotiation
		 * has completed (or it's disabled).
		 */
		if ((bmsr & BMSR_ACOMP) == 0) {
			/* Erg, still trying, I guess... */
			mii->mii_media_active |= IFM_NONE;
			return;
		}

		if (sc->mii_mpd_model == MII_MODEL_BROADCOM2_BCM5709S) {

			/* 5709S has its own general purpose status registers */

			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
			    BRGPHY_BLOCK_ADDR_GP_STATUS);

			auxsts = PHY_READ(sc, BRGPHY_GP_STATUS_TOP_ANEG_STATUS);

			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
			    BRGPHY_BLOCK_ADDR_COMBO_IEEE0);

			switch (auxsts & BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK) {
			case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10:
				mii->mii_media_active |= IFM_10_FL;
				break;
			case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100:
				mii->mii_media_active |= IFM_100_FX;
				break;
			case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G:
				mii->mii_media_active |= IFM_1000_SX;
				break;
			case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G:
				mii->mii_media_active |= IFM_2500_SX;
				break;
			default:
				mii->mii_media_active |= IFM_NONE;
				mii->mii_media_status = 0;
				break;
			}

			if (auxsts & BRGPHY_GP_STATUS_TOP_ANEG_FDX)
				mii->mii_media_active |= IFM_FDX;
			else
				mii->mii_media_active |= IFM_HDX;

		} else {
			auxsts = PHY_READ(sc, BRGPHY_MII_AUXSTS);

			switch (auxsts & BRGPHY_AUXSTS_AN_RES) {
			case BRGPHY_RES_1000FD:
				mii->mii_media_active |= IFM_1000_T|IFM_FDX;
				gtsr = PHY_READ(sc, MII_100T2SR);
				if (gtsr & GTSR_MS_RES)
					mii->mii_media_active |= IFM_ETH_MASTER;
				break;

			case BRGPHY_RES_1000HD:
				mii->mii_media_active |= IFM_1000_T;
				gtsr = PHY_READ(sc, MII_100T2SR);
				if (gtsr & GTSR_MS_RES)
					mii->mii_media_active |= IFM_ETH_MASTER;
				break;

			case BRGPHY_RES_100FD:
				mii->mii_media_active |= IFM_100_TX|IFM_FDX;
				break;

			case BRGPHY_RES_100T4:
				mii->mii_media_active |= IFM_100_T4;
				break;

			case BRGPHY_RES_100HD:
				mii->mii_media_active |= IFM_100_TX;
				break;

			case BRGPHY_RES_10FD:
				mii->mii_media_active |= IFM_10_T|IFM_FDX;
				break;

			case BRGPHY_RES_10HD:
				mii->mii_media_active |= IFM_10_T;
				break;

			default:
				mii->mii_media_active |= IFM_NONE;
				mii->mii_media_status = 0;
			}
		}

		if (mii->mii_media_active & IFM_FDX)
			mii->mii_media_active |= mii_phy_flowstatus(sc);

	} else
		mii->mii_media_active = ife->ifm_media;
}

int
brgphy_mii_phy_auto(struct mii_softc *sc)
{
	int anar, ktcr = 0;

	brgphy_loop(sc);
	PHY_RESET(sc);

	ktcr = GTCR_ADV_1000TFDX|GTCR_ADV_1000THDX;
	if (sc->mii_mpd_model == MII_MODEL_BROADCOM_BCM5701)
		ktcr |= GTCR_MAN_MS|GTCR_ADV_MS;
	PHY_WRITE(sc, MII_100T2CR, ktcr);
	ktcr = PHY_READ(sc, MII_100T2CR);
	DELAY(1000);

	if (sc->mii_flags & MIIF_HAVEFIBER) {
		anar = ANAR_X_FD | ANAR_X_HD;
		if (sc->mii_flags & MIIF_DOPAUSE)
			anar |= BRGPHY_SERDES_ANAR_BOTH_PAUSE;
	} else {
		anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA;
		if (sc->mii_flags & MIIF_DOPAUSE)
			anar |= ANAR_FC | ANAR_X_PAUSE_ASYM;
	}
	PHY_WRITE(sc, MII_ANAR, anar);
	DELAY(1000);

	/* Start autonegotiation */
	PHY_WRITE(sc, MII_BMCR,
	    BMCR_AUTOEN | BMCR_STARTNEG);
	PHY_WRITE(sc, BRGPHY_MII_IMR, 0xFF00);

	return (EJUSTRETURN);
}

void
brgphy_loop(struct mii_softc *sc)
{
	u_int32_t bmsr;
	int i;

	PHY_WRITE(sc, MII_BMCR, BMCR_LOOP);
	for (i = 0; i < 15000; i++) {
		bmsr = PHY_READ(sc, MII_BMSR);
		if (!(bmsr & BMSR_LINK))
			break;
		DELAY(10);
	}
}

static void
brgphy_reset(struct mii_softc *sc)
{
	struct brgphy_softc *bsc = device_private(sc->mii_dev);

	mii_phy_reset(sc);

	switch (sc->mii_mpd_model) {
	case MII_MODEL_BROADCOM_BCM5400:
		brgphy_bcm5401_dspcode(sc);
		break;
	case MII_MODEL_BROADCOM_BCM5401:
		if (sc->mii_mpd_rev == 1 || sc->mii_mpd_rev == 3)
			brgphy_bcm5401_dspcode(sc);
		break;
	case MII_MODEL_BROADCOM_BCM5411:
		brgphy_bcm5411_dspcode(sc);
		break;
	case MII_MODEL_BROADCOM_BCM5421:
		brgphy_bcm5421_dspcode(sc);
		break;
	case MII_MODEL_BROADCOM_BCM54K2:
		brgphy_bcm54k2_dspcode(sc);
		break;
	}

	/* Handle any bge (NetXtreme/NetLink) workarounds. */
	if (bsc->sc_isbge) {
		if (!(sc->mii_flags & MIIF_HAVEFIBER)) {

			if (bsc->sc_phyflags & BGE_PHY_ADC_BUG)
				brgphy_adc_bug(sc);
			if (bsc->sc_phyflags & BGE_PHY_5704_A0_BUG)
				brgphy_5704_a0_bug(sc);
			if (bsc->sc_phyflags & BGE_PHY_BER_BUG)
				brgphy_ber_bug(sc);
			else if (bsc->sc_phyflags & BGE_PHY_JITTER_BUG) {
				PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x0c00);
				PHY_WRITE(sc, BRGPHY_MII_DSP_ADDR_REG,
				    0x000a);

				if (bsc->sc_phyflags
				    & BGE_PHY_ADJUST_TRIM) {
					PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT,
					    0x110b);
					PHY_WRITE(sc, BRGPHY_TEST1,
					    BRGPHY_TEST1_TRIM_EN | 0x4);
				} else {
					PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT,
					    0x010b);
				}

				PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x0400);
			}
			if (bsc->sc_phyflags & BGE_PHY_CRC_BUG)
				brgphy_crc_bug(sc);

			/* Set Jumbo frame settings in the PHY. */
			if (bsc->sc_phyflags & BGE_JUMBO_CAPABLE)
				brgphy_jumbo_settings(sc);

			/* Adjust output voltage */
			if (sc->mii_mpd_model == MII_MODEL_BROADCOM2_BCM5906)
				PHY_WRITE(sc, BRGPHY_MII_EPHY_PTEST, 0x12);

			/* Enable Ethernet@Wirespeed */
			if (!(bsc->sc_phyflags & BGE_NO_ETH_WIRE_SPEED))
				brgphy_eth_wirespeed(sc);

#if 0
			/* Enable Link LED on Dell boxes */
			if (bsc->sc_phyflags & BGE_NO_3LED) {
				PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
				PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL)
					& ~BRGPHY_PHY_EXTCTL_3_LED);
			}
#endif
		}
	/* Handle any bnx (NetXtreme II) workarounds. */
	} else if (bsc->sc_isbnx) {
#if 0 /* not yet */
		if (sc->mii_mpd_model == MII_MODEL_xxBROADCOM2_BCM5708S) {
			/* Store autoneg capabilities/results in digital block (Page 0) */
			PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG3_PG2);
			PHY_WRITE(sc, BRGPHY_5708S_PG2_DIGCTL_3_0,
				BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE);
			PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0);

			/* Enable fiber mode and autodetection */
			PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL1,
				PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL1) |
				BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN |
				BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE);

			/* Enable parallel detection */
			PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL2,
				PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL2) |
				BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN);

			/* Advertise 2.5G support through next page during autoneg */
			if (bnx_sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG)
				PHY_WRITE(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1,
					PHY_READ(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1) |
					BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);

			/* Increase TX signal amplitude */
			if ((BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_A0) ||
			    (BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_B0) ||
			    (BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_B1)) {
				PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
					BRGPHY_5708S_TX_MISC_PG5);
				PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL1,
					PHY_READ(sc, BRGPHY_5708S_PG5_TXACTL1) &
					~BRGPHY_5708S_PG5_TXACTL1_VCM);
				PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
					BRGPHY_5708S_DIG_PG0);
			}

			/* Backplanes use special driver/pre-driver/pre-emphasis values. */
			if ((bnx_sc->bnx_shared_hw_cfg & BNX_SHARED_HW_CFG_PHY_BACKPLANE) &&
			    (bnx_sc->bnx_port_hw_cfg & BNX_PORT_HW_CFG_CFG_TXCTL3_MASK)) {
					PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
						BRGPHY_5708S_TX_MISC_PG5);
					PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL3,
						bnx_sc->bnx_port_hw_cfg &
						BNX_PORT_HW_CFG_CFG_TXCTL3_MASK);
					PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
						BRGPHY_5708S_DIG_PG0);
			}
		} else
#endif
		if (sc->mii_mpd_model ==  MII_MODEL_BROADCOM2_BCM5709S) {
			/* Select the SerDes Digital block of the AN MMD. */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
			    BRGPHY_BLOCK_ADDR_SERDES_DIG);

			PHY_WRITE(sc, BRGPHY_SERDES_DIG_1000X_CTL1,
			    (PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1) &
			    ~BRGPHY_SD_DIG_1000X_CTL1_AUTODET) |
			    BRGPHY_SD_DIG_1000X_CTL1_FIBER);

			if (bsc->sc_phyflags & BNX_PHY_2_5G_CAPABLE_FLAG) {
				/* Select the Over 1G block of the AN MMD. */
				PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
				    BRGPHY_BLOCK_ADDR_OVER_1G);

				/*
				 * Enable autoneg "Next Page" to advertise
				 * 2.5G support.
				 */
				PHY_WRITE(sc, BRGPHY_OVER_1G_UNFORMAT_PG1,
				    PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1) |
				    BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);
			}

                        /*
                         * Select the Multi-Rate Backplane Ethernet block of
                         * the AN MMD.
                         */
                        PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
                            BRGPHY_BLOCK_ADDR_MRBE);

                        /* Enable MRBE speed autoneg. */
                        PHY_WRITE(sc, BRGPHY_MRBE_MSG_PG5_NP,
                            PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP) |
                            BRGPHY_MRBE_MSG_PG5_NP_MBRE |
                            BRGPHY_MRBE_MSG_PG5_NP_T2);

                        /* Select the Clause 73 User B0 block of the AN MMD. */
                        PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
                            BRGPHY_BLOCK_ADDR_CL73_USER_B0);

                        /* Enable MRBE speed autoneg. */
                        PHY_WRITE(sc, BRGPHY_CL73_USER_B0_MBRE_CTL1,
                            BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP |
                            BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR |
                            BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG);

                        PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
                            BRGPHY_BLOCK_ADDR_COMBO_IEEE0);

		} else if (_BNX_CHIP_NUM(bsc->sc_chipid) == BNX_CHIP_NUM_5709) {
			if (_BNX_CHIP_REV(bsc->sc_chipid) == BNX_CHIP_REV_Ax ||
			    _BNX_CHIP_REV(bsc->sc_chipid) == BNX_CHIP_REV_Bx)
				brgphy_disable_early_dac(sc);

			/* Set Jumbo frame settings in the PHY. */
			brgphy_jumbo_settings(sc);

			/* Enable Ethernet@Wirespeed */
			brgphy_eth_wirespeed(sc);
		} else {
			if (!(sc->mii_flags & MIIF_HAVEFIBER)) {
				brgphy_ber_bug(sc);

				/* Set Jumbo frame settings in the PHY. */
				brgphy_jumbo_settings(sc);

				/* Enable Ethernet@Wirespeed */
				brgphy_eth_wirespeed(sc);
			}
		}
	}
}

/* Turn off tap power management on 5401. */
static void
brgphy_bcm5401_dspcode(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c20 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x0012 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x1804 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x0013 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x1204 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x8006 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0132 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x8006 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0232 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x201f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0a20 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
    delay(40);
}

static void
brgphy_bcm5411_dspcode(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ 0x1c,				0x8c23 },
		{ 0x1c,				0x8ca3 },
		{ 0x1c,				0x8c23 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

void
brgphy_bcm5421_dspcode(struct mii_softc *sc)
{
	uint16_t data;

	/* Set Class A mode */
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x1007);
	data = PHY_READ(sc, BRGPHY_MII_AUXCTL);
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, data | 0x0400);

	/* Set FFE gamma override to -0.125 */
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x0007);
	data = PHY_READ(sc, BRGPHY_MII_AUXCTL);
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, data | 0x0800);
	PHY_WRITE(sc, BRGPHY_MII_DSP_ADDR_REG, 0x000a);
	data = PHY_READ(sc, BRGPHY_MII_DSP_RW_PORT);
	PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT, data | 0x0200);
}

void
brgphy_bcm54k2_dspcode(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ 4,				0x01e1 },
		{ 9,				0x0300 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_adc_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c00 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x201f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x2aaa },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x000a },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0323 },
		{ BRGPHY_MII_AUXCTL,		0x0400 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_5704_a0_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ 0x1c,				0x8d68 },
		{ 0x1c,				0x8d68 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_ber_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c00 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x000a },
		{ BRGPHY_MII_DSP_RW_PORT,	0x310b },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x201f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x9506 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x401f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x14e2 },
		{ BRGPHY_MII_AUXCTL,		0x0400 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

/* BCM5701 A0/B0 CRC bug workaround */
void
brgphy_crc_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_DSP_ADDR_REG,	0x0a75 },
		{ 0x1c,				0x8c68 },
		{ 0x1c,				0x8d68 },
		{ 0x1c,				0x8c68 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_disable_early_dac(struct mii_softc *sc)
{
	uint32_t val;

	PHY_WRITE(sc, BRGPHY_MII_DSP_ADDR_REG, 0x0f08);
	val = PHY_READ(sc, BRGPHY_MII_DSP_RW_PORT);
	val &= ~(1 << 8);
	PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT, val);

}

static void
brgphy_jumbo_settings(struct mii_softc *sc)
{
	u_int32_t val;

	/* Set Jumbo frame settings in the PHY. */
	if (sc->mii_mpd_model == MII_MODEL_BROADCOM_BCM5401) {
		/* Cannot do read-modify-write on the BCM5401 */
		PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x4c20);
	} else {
		PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7);
		val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
		PHY_WRITE(sc, BRGPHY_MII_AUXCTL,
			val & ~(BRGPHY_AUXCTL_LONG_PKT | 0x7));
	}

	val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL);
	PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
		val & ~BRGPHY_PHY_EXTCTL_HIGH_LA);
}

static void
brgphy_eth_wirespeed(struct mii_softc *sc)
{
	u_int32_t val;

	/* Enable Ethernet@Wirespeed */
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7007);
	val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL,
		(val | (1 << 15) | (1 << 4)));
}