gphyter.c revision 1.29.4.1
1 /* $NetBSD: gphyter.c,v 1.29.4.1 2016/07/09 20:25:03 skrll Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Copyright (c) 1997 Manuel Bouyer. All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 45 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 46 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 47 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 48 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 49 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 50 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 51 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 52 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 53 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 54 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 55 */ 56 57 /* 58 * driver for National Semiconductor's DP83891, DP83861 and DP83865 59 * `Gig PHYTER' ethernet 10/100/1000 PHYs. The DP83891 is an older, 60 * non-firmware-driven version of the DP83861. The DP83865 is a low 61 * power version of the DP83861. 62 * 63 * Data Sheets available from www.national.com: 64 * http://www.national.com/ds/DP/DP83861.pdf 65 * http://www.national.com/ds/DP/DP83865.pdf 66 */ 67 68 #include <sys/cdefs.h> 69 __KERNEL_RCSID(0, "$NetBSD: gphyter.c,v 1.29.4.1 2016/07/09 20:25:03 skrll Exp $"); 70 71 #include <sys/param.h> 72 #include <sys/systm.h> 73 #include <sys/kernel.h> 74 #include <sys/device.h> 75 #include <sys/socket.h> 76 #include <sys/errno.h> 77 78 #include <net/if.h> 79 #include <net/if_media.h> 80 81 #include <dev/mii/mii.h> 82 #include <dev/mii/miivar.h> 83 #include <dev/mii/miidevs.h> 84 85 #include <dev/mii/gphyterreg.h> 86 87 static int gphytermatch(device_t, cfdata_t, void *); 88 static void gphyterattach(device_t, device_t, void *); 89 90 CFATTACH_DECL_NEW(gphyter, sizeof(struct mii_softc), 91 gphytermatch, gphyterattach, mii_phy_detach, mii_phy_activate); 92 93 static int gphyter_service(struct mii_softc *, struct mii_data *, int); 94 static void gphyter_status(struct mii_softc *); 95 static void gphyter_reset(struct mii_softc *); 96 97 static const struct mii_phy_funcs gphyter_funcs = { 98 gphyter_service, gphyter_status, gphyter_reset, 99 }; 100 101 static const struct mii_phydesc gphyters[] = { 102 { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83861, 103 MII_STR_xxNATSEMI_DP83861 }, 104 105 { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83865, 106 MII_STR_xxNATSEMI_DP83865 }, 107 108 { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83891, 109 MII_STR_xxNATSEMI_DP83891 }, 110 111 { 0, 0, 112 NULL }, 113 }; 114 115 static int 116 gphytermatch(device_t parent, cfdata_t match, void *aux) 117 { 118 struct mii_attach_args *ma = aux; 119 120 if (mii_phy_match(ma, gphyters) != NULL) 121 return (10); 122 123 return (0); 124 } 125 126 static void 127 gphyterattach(device_t parent, device_t self, void *aux) 128 { 129 struct mii_softc *sc = device_private(self); 130 struct mii_attach_args *ma = aux; 131 struct mii_data *mii = ma->mii_data; 132 const struct mii_phydesc *mpd; 133 int anar, strap; 134 135 mpd = mii_phy_match(ma, gphyters); 136 aprint_naive(": Media interface\n"); 137 aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); 138 139 sc->mii_dev = self; 140 sc->mii_inst = mii->mii_instance; 141 sc->mii_phy = ma->mii_phyno; 142 sc->mii_funcs = &gphyter_funcs; 143 sc->mii_pdata = mii; 144 sc->mii_flags = ma->mii_flags; 145 sc->mii_anegticks = MII_ANEGTICKS; 146 147 PHY_RESET(sc); 148 149 sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 150 if (sc->mii_capabilities & BMSR_EXTSTAT) 151 sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR); 152 153 /* 154 * The Gig PHYTER seems to have the 10baseT BMSR bits 155 * hard-wired to 0, even though the device supports 156 * 10baseT. What we do instead is read the post-reset 157 * ANAR, who's 10baseT-related bits are set by strapping 158 * pin 180, and fake the BMSR bits. 159 */ 160 anar = PHY_READ(sc, MII_ANAR); 161 if (anar & ANAR_10) 162 sc->mii_capabilities |= (BMSR_10THDX & ma->mii_capmask); 163 if (anar & ANAR_10_FD) 164 sc->mii_capabilities |= (BMSR_10TFDX & ma->mii_capmask); 165 166 aprint_normal_dev(self, ""); 167 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0 && 168 (sc->mii_extcapabilities & EXTSR_MEDIAMASK) == 0) 169 aprint_error("no media present"); 170 else 171 mii_phy_add_media(sc); 172 aprint_normal("\n"); 173 174 strap = PHY_READ(sc, MII_GPHYTER_STRAP); 175 aprint_normal_dev(self, "strapped to %s mode", 176 (strap & STRAP_MS_VAL) ? "master" : "slave"); 177 if (strap & STRAP_NC_MODE) 178 aprint_normal(", pre-C5 BCM5400 compat enabled"); 179 aprint_normal("\n"); 180 } 181 182 static int 183 gphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 184 { 185 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 186 int reg; 187 188 switch (cmd) { 189 case MII_POLLSTAT: 190 /* 191 * If we're not polling our PHY instance, just return. 192 */ 193 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 194 return (0); 195 break; 196 197 case MII_MEDIACHG: 198 /* 199 * If the media indicates a different PHY instance, 200 * isolate ourselves. 201 */ 202 if (IFM_INST(ife->ifm_media) != sc->mii_inst) { 203 reg = PHY_READ(sc, MII_BMCR); 204 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 205 return (0); 206 } 207 208 /* 209 * If the interface is not up, don't do anything. 210 */ 211 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 212 break; 213 214 mii_phy_setmedia(sc); 215 break; 216 217 case MII_TICK: 218 /* 219 * If we're not currently selected, just return. 220 */ 221 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 222 return (0); 223 224 if (mii_phy_tick(sc) == EJUSTRETURN) 225 return (0); 226 break; 227 228 case MII_DOWN: 229 mii_phy_down(sc); 230 return (0); 231 } 232 233 /* Update the media status. */ 234 mii_phy_status(sc); 235 236 /* Callback if something changed. */ 237 mii_phy_update(sc, cmd); 238 return (0); 239 } 240 241 static void 242 gphyter_status(struct mii_softc *sc) 243 { 244 struct mii_data *mii = sc->mii_pdata; 245 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 246 int bmsr, bmcr, physup, gtsr; 247 248 mii->mii_media_status = IFM_AVALID; 249 mii->mii_media_active = IFM_ETHER; 250 251 bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); 252 253 physup = PHY_READ(sc, MII_GPHYTER_PHY_SUP); 254 255 if (physup & PHY_SUP_LINK) 256 mii->mii_media_status |= IFM_ACTIVE; 257 258 bmcr = PHY_READ(sc, MII_BMCR); 259 if (bmcr & BMCR_ISO) { 260 mii->mii_media_active |= IFM_NONE; 261 mii->mii_media_status = 0; 262 return; 263 } 264 265 if (bmcr & BMCR_LOOP) 266 mii->mii_media_active |= IFM_LOOP; 267 268 if (bmcr & BMCR_AUTOEN) { 269 /* 270 * The media status bits are only valid of autonegotiation 271 * has completed (or it's disabled). 272 */ 273 if ((bmsr & BMSR_ACOMP) == 0) { 274 /* Erg, still trying, I guess... */ 275 mii->mii_media_active |= IFM_NONE; 276 return; 277 } 278 279 switch (physup & (PHY_SUP_SPEED1|PHY_SUP_SPEED0)) { 280 case PHY_SUP_SPEED1: 281 mii->mii_media_active |= IFM_1000_T; 282 gtsr = PHY_READ(sc, MII_100T2SR); 283 if (gtsr & GTSR_MS_RES) 284 mii->mii_media_active |= IFM_ETH_MASTER; 285 break; 286 287 case PHY_SUP_SPEED0: 288 mii->mii_media_active |= IFM_100_TX; 289 break; 290 291 case 0: 292 mii->mii_media_active |= IFM_10_T; 293 break; 294 295 default: 296 mii->mii_media_active |= IFM_NONE; 297 mii->mii_media_status = 0; 298 } 299 if (physup & PHY_SUP_DUPLEX) 300 mii->mii_media_active |= 301 IFM_FDX | mii_phy_flowstatus(sc); 302 else 303 mii->mii_media_active |= IFM_HDX; 304 } else 305 mii->mii_media_active = ife->ifm_media; 306 } 307 308 void 309 gphyter_reset(struct mii_softc *sc) 310 { 311 int reg, i; 312 313 if (sc->mii_flags & MIIF_NOISOLATE) 314 reg = BMCR_RESET; 315 else 316 reg = BMCR_RESET | BMCR_ISO; 317 PHY_WRITE(sc, MII_BMCR, reg); 318 319 /* 320 * It is best to allow a little time for the reset to settle 321 * in before we start polling the BMCR again. Notably, the 322 * DP83840A manual states that there should be a 500us delay 323 * between asserting software reset and attempting MII serial 324 * operations. Also, a DP83815 can get into a bad state on 325 * cable removal and reinsertion if we do not delay here. 326 */ 327 delay(500); 328 329 /* Wait another 100ms for it to complete. */ 330 for (i = 0; i < 100; i++) { 331 reg = PHY_READ(sc, MII_BMCR); 332 if ((reg & BMCR_RESET) == 0) 333 break; 334 delay(1000); 335 } 336 337 if (sc->mii_inst != 0 && ((sc->mii_flags & MIIF_NOISOLATE) == 0)) 338 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 339 } 340
Indexes created Sun Oct 19 02:09:48 GMT 2025