nsphy.c revision 1.16.6.2
1 /* $NetBSD: nsphy.c,v 1.16.6.2 2000/07/31 17:21:00 he Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * Copyright (c) 1997 Manuel Bouyer. All rights reserved. 42 * 43 * Redistribution and use in source and binary forms, with or without 44 * modification, are permitted provided that the following conditions 45 * are met: 46 * 1. Redistributions of source code must retain the above copyright 47 * notice, this list of conditions and the following disclaimer. 48 * 2. Redistributions in binary form must reproduce the above copyright 49 * notice, this list of conditions and the following disclaimer in the 50 * documentation and/or other materials provided with the distribution. 51 * 3. All advertising materials mentioning features or use of this software 52 * must display the following acknowledgement: 53 * This product includes software developed by Manuel Bouyer. 54 * 4. The name of the author may not be used to endorse or promote products 55 * derived from this software without specific prior written permission. 56 * 57 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 58 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 59 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 60 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 61 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 62 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 63 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 64 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 65 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 66 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 67 */ 68 69 /* 70 * driver for National Semiconductor's DP83840A ethernet 10/100 PHY 71 * Data Sheet available from www.national.com 72 */ 73 74 #include <sys/param.h> 75 #include <sys/systm.h> 76 #include <sys/kernel.h> 77 #include <sys/device.h> 78 #include <sys/malloc.h> 79 #include <sys/socket.h> 80 #include <sys/errno.h> 81 82 #include <net/if.h> 83 #include <net/if_media.h> 84 85 #include <dev/mii/mii.h> 86 #include <dev/mii/miivar.h> 87 #include <dev/mii/miidevs.h> 88 89 #include <dev/mii/nsphyreg.h> 90 91 int nsphymatch __P((struct device *, struct cfdata *, void *)); 92 void nsphyattach __P((struct device *, struct device *, void *)); 93 94 struct cfattach nsphy_ca = { 95 sizeof(struct mii_softc), nsphymatch, nsphyattach 96 }; 97 98 int nsphy_service __P((struct mii_softc *, struct mii_data *, int)); 99 void nsphy_status __P((struct mii_softc *)); 100 101 int 102 nsphymatch(parent, match, aux) 103 struct device *parent; 104 struct cfdata *match; 105 void *aux; 106 { 107 struct mii_attach_args *ma = aux; 108 109 if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_NATSEMI && 110 MII_MODEL(ma->mii_id2) == MII_MODEL_NATSEMI_DP83840) 111 return (10); 112 113 return (0); 114 } 115 116 void 117 nsphyattach(parent, self, aux) 118 struct device *parent, *self; 119 void *aux; 120 { 121 struct mii_softc *sc = (struct mii_softc *)self; 122 struct mii_attach_args *ma = aux; 123 struct mii_data *mii = ma->mii_data; 124 125 printf(": %s, rev. %d\n", MII_STR_NATSEMI_DP83840, 126 MII_REV(ma->mii_id2)); 127 128 sc->mii_inst = mii->mii_instance; 129 sc->mii_phy = ma->mii_phyno; 130 sc->mii_service = nsphy_service; 131 sc->mii_pdata = mii; 132 133 /* 134 * i82557 wedges if all of its PHYs are isolated! 135 */ 136 if (strcmp(parent->dv_cfdata->cf_driver->cd_name, "fxp") == 0 && 137 mii->mii_instance == 0) 138 sc->mii_flags |= MIIF_NOISOLATE; 139 140 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL) 141 142 #if 0 143 /* Can't do this on the i82557! */ 144 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), 145 BMCR_ISO); 146 #endif 147 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst), 148 BMCR_LOOP|BMCR_S100); 149 150 mii_phy_reset(sc); 151 152 sc->mii_capabilities = 153 PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 154 printf("%s: ", sc->mii_dev.dv_xname); 155 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 156 printf("no media present"); 157 else 158 mii_add_media(mii, sc->mii_capabilities, 159 sc->mii_inst); 160 printf("\n"); 161 #undef ADD 162 } 163 164 int 165 nsphy_service(sc, mii, cmd) 166 struct mii_softc *sc; 167 struct mii_data *mii; 168 int cmd; 169 { 170 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 171 int reg; 172 173 switch (cmd) { 174 case MII_POLLSTAT: 175 /* 176 * If we're not polling our PHY instance, just return. 177 */ 178 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 179 return (0); 180 break; 181 182 case MII_MEDIACHG: 183 /* 184 * If the media indicates a different PHY instance, 185 * isolate ourselves. 186 */ 187 if (IFM_INST(ife->ifm_media) != sc->mii_inst) { 188 reg = PHY_READ(sc, MII_BMCR); 189 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 190 return (0); 191 } 192 193 /* 194 * If the interface is not up, don't do anything. 195 */ 196 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 197 break; 198 199 reg = PHY_READ(sc, MII_NSPHY_PCR); 200 201 /* 202 * Set up the PCR to use LED4 to indicate full-duplex 203 * in both 10baseT and 100baseTX modes. 204 */ 205 reg |= PCR_LED4MODE; 206 207 /* 208 * Make sure Carrier Intgrity Monitor function is 209 * disabled (normal for Node operation, but sometimes 210 * it's not set?!) 211 */ 212 reg |= PCR_CIMDIS; 213 214 /* 215 * Make sure "force link good" is not set. It's only 216 * intended for debugging, but sometimes it's set 217 * after a reset. 218 */ 219 reg &= ~PCR_FLINK100; 220 221 /* 222 * Mystery bits which are supposedly `reserved', 223 * but we seem to need to set them when the PHY 224 * is connected to some interfaces: 225 * 226 * 0x0400 is needed for fxp 227 * (Intel EtherExpress Pro 10+/100B, 82557 chip) 228 * (nsphy with a DP83840 chip) 229 * 0x0100 may be needed for some other card 230 */ 231 reg |= 0x0100 | 0x0400; 232 233 PHY_WRITE(sc, MII_NSPHY_PCR, reg); 234 235 switch (IFM_SUBTYPE(ife->ifm_media)) { 236 case IFM_AUTO: 237 /* 238 * If we're already in auto mode, just return. 239 */ 240 if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN) 241 return (0); 242 (void) mii_phy_auto(sc, 1); 243 break; 244 case IFM_100_T4: 245 /* 246 * XXX Not supported as a manual setting right now. 247 */ 248 return (EINVAL); 249 default: 250 /* 251 * BMCR data is stored in the ifmedia entry. 252 */ 253 PHY_WRITE(sc, MII_ANAR, 254 mii_anar(ife->ifm_media)); 255 PHY_WRITE(sc, MII_BMCR, ife->ifm_data); 256 } 257 break; 258 259 case MII_TICK: 260 /* 261 * If we're not currently selected, just return. 262 */ 263 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 264 return (0); 265 266 /* 267 * Only used for autonegotiation. 268 */ 269 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) 270 return (0); 271 272 /* 273 * Is the interface even up? 274 */ 275 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 276 return (0); 277 278 /* 279 * Check to see if we have link. If we do, we don't 280 * need to restart the autonegotiation process. Read 281 * the BMSR twice in case it's latched. 282 */ 283 reg = PHY_READ(sc, MII_BMSR) | 284 PHY_READ(sc, MII_BMSR); 285 if (reg & BMSR_LINK) 286 return (0); 287 288 /* 289 * Only retry autonegotiation every 5 seconds. 290 */ 291 if (++sc->mii_ticks != 5) 292 return (0); 293 294 sc->mii_ticks = 0; 295 mii_phy_reset(sc); 296 if (mii_phy_auto(sc, 0) == EJUSTRETURN) 297 return (0); 298 break; 299 } 300 301 /* Update the media status. */ 302 nsphy_status(sc); 303 304 /* Callback if something changed. */ 305 if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) { 306 (*mii->mii_statchg)(sc->mii_dev.dv_parent); 307 sc->mii_active = mii->mii_media_active; 308 } 309 return (0); 310 } 311 312 void 313 nsphy_status(sc) 314 struct mii_softc *sc; 315 { 316 struct mii_data *mii = sc->mii_pdata; 317 int bmsr, bmcr, par, anlpar; 318 319 mii->mii_media_status = IFM_AVALID; 320 mii->mii_media_active = IFM_ETHER; 321 322 bmsr = PHY_READ(sc, MII_BMSR) | 323 PHY_READ(sc, MII_BMSR); 324 if (bmsr & BMSR_LINK) 325 mii->mii_media_status |= IFM_ACTIVE; 326 327 bmcr = PHY_READ(sc, MII_BMCR); 328 if (bmcr & BMCR_ISO) { 329 mii->mii_media_active |= IFM_NONE; 330 mii->mii_media_status = 0; 331 return; 332 } 333 334 if (bmcr & BMCR_LOOP) 335 mii->mii_media_active |= IFM_LOOP; 336 337 if (bmcr & BMCR_AUTOEN) { 338 /* 339 * The PAR status bits are only valid of autonegotiation 340 * has completed (or it's disabled). 341 */ 342 if ((bmsr & BMSR_ACOMP) == 0) { 343 /* Erg, still trying, I guess... */ 344 mii->mii_media_active |= IFM_NONE; 345 return; 346 } 347 348 /* 349 * Argh. The PAR doesn't seem to indicate duplex mode 350 * properly! Determine media based on link partner's 351 * advertised capabilities. 352 */ 353 if (PHY_READ(sc, MII_ANER) & ANER_LPAN) { 354 anlpar = PHY_READ(sc, MII_ANAR) & 355 PHY_READ(sc, MII_ANLPAR); 356 if (anlpar & ANLPAR_T4) 357 mii->mii_media_active |= IFM_100_T4; 358 else if (anlpar & ANLPAR_TX_FD) 359 mii->mii_media_active |= IFM_100_TX|IFM_FDX; 360 else if (anlpar & ANLPAR_TX) 361 mii->mii_media_active |= IFM_100_TX; 362 else if (anlpar & ANLPAR_10_FD) 363 mii->mii_media_active |= IFM_10_T|IFM_FDX; 364 else if (anlpar & ANLPAR_10) 365 mii->mii_media_active |= IFM_10_T; 366 else 367 mii->mii_media_active |= IFM_NONE; 368 return; 369 } 370 371 /* 372 * Link partner is not capable of autonegotiation. 373 * We will never be in full-duplex mode if this is 374 * the case, so reading the PAR is OK. 375 */ 376 par = PHY_READ(sc, MII_NSPHY_PAR); 377 if (par & PAR_10) 378 mii->mii_media_active |= IFM_10_T; 379 else 380 mii->mii_media_active |= IFM_100_TX; 381 #if 0 382 if (par & PAR_FDX) 383 mii->mii_media_active |= IFM_FDX; 384 #endif 385 } else 386 mii->mii_media_active = mii_media_from_bmcr(bmcr); 387 } 388
Indexes created Wed Oct 22 13:09:56 GMT 2025