Home | History | Annotate | Line # | Download | only in mii
nsphy.c revision 1.18
      1 /*	$NetBSD: nsphy.c,v 1.18 1999/07/14 23:57:36 thorpej Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
      9  * NASA Ames Research Center.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  * 3. All advertising materials mentioning features or use of this software
     20  *    must display the following acknowledgement:
     21  *	This product includes software developed by the NetBSD
     22  *	Foundation, Inc. and its contributors.
     23  * 4. Neither the name of The NetBSD Foundation nor the names of its
     24  *    contributors may be used to endorse or promote products derived
     25  *    from this software without specific prior written permission.
     26  *
     27  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     29  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     30  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     31  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     32  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     35  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     37  * POSSIBILITY OF SUCH DAMAGE.
     38  */
     39 
     40 /*
     41  * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
     42  *
     43  * Redistribution and use in source and binary forms, with or without
     44  * modification, are permitted provided that the following conditions
     45  * are met:
     46  * 1. Redistributions of source code must retain the above copyright
     47  *    notice, this list of conditions and the following disclaimer.
     48  * 2. Redistributions in binary form must reproduce the above copyright
     49  *    notice, this list of conditions and the following disclaimer in the
     50  *    documentation and/or other materials provided with the distribution.
     51  * 3. All advertising materials mentioning features or use of this software
     52  *    must display the following acknowledgement:
     53  *	This product includes software developed by Manuel Bouyer.
     54  * 4. The name of the author may not be used to endorse or promote products
     55  *    derived from this software without specific prior written permission.
     56  *
     57  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     58  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     59  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     60  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     61  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     62  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     63  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     64  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     65  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     66  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     67  */
     68 
     69 /*
     70  * driver for National Semiconductor's DP83840A ethernet 10/100 PHY
     71  * Data Sheet available from www.national.com
     72  */
     73 
     74 #include <sys/param.h>
     75 #include <sys/systm.h>
     76 #include <sys/kernel.h>
     77 #include <sys/device.h>
     78 #include <sys/malloc.h>
     79 #include <sys/socket.h>
     80 #include <sys/errno.h>
     81 
     82 #include <net/if.h>
     83 #include <net/if_media.h>
     84 
     85 #include <dev/mii/mii.h>
     86 #include <dev/mii/miivar.h>
     87 #include <dev/mii/miidevs.h>
     88 
     89 #include <dev/mii/nsphyreg.h>
     90 
     91 int	nsphymatch __P((struct device *, struct cfdata *, void *));
     92 void	nsphyattach __P((struct device *, struct device *, void *));
     93 
     94 struct cfattach nsphy_ca = {
     95 	sizeof(struct mii_softc), nsphymatch, nsphyattach
     96 };
     97 
     98 int	nsphy_service __P((struct mii_softc *, struct mii_data *, int));
     99 void	nsphy_status __P((struct mii_softc *));
    100 
    101 int
    102 nsphymatch(parent, match, aux)
    103 	struct device *parent;
    104 	struct cfdata *match;
    105 	void *aux;
    106 {
    107 	struct mii_attach_args *ma = aux;
    108 
    109 	if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_NATSEMI &&
    110 	    MII_MODEL(ma->mii_id2) == MII_MODEL_NATSEMI_DP83840)
    111 		return (10);
    112 
    113 	return (0);
    114 }
    115 
    116 void
    117 nsphyattach(parent, self, aux)
    118 	struct device *parent, *self;
    119 	void *aux;
    120 {
    121 	struct mii_softc *sc = (struct mii_softc *)self;
    122 	struct mii_attach_args *ma = aux;
    123 	struct mii_data *mii = ma->mii_data;
    124 
    125 	printf(": %s, rev. %d\n", MII_STR_NATSEMI_DP83840,
    126 	    MII_REV(ma->mii_id2));
    127 
    128 	sc->mii_inst = mii->mii_instance;
    129 	sc->mii_phy = ma->mii_phyno;
    130 	sc->mii_service = nsphy_service;
    131 	sc->mii_pdata = mii;
    132 
    133 	/*
    134 	 * i82557 wedges if all of its PHYs are isolated!
    135 	 */
    136 	if (strcmp(parent->dv_cfdata->cf_driver->cd_name, "fxp") == 0 &&
    137 	    mii->mii_instance == 0)
    138 		sc->mii_flags |= MIIF_NOISOLATE;
    139 
    140 #define	ADD(m, c)	ifmedia_add(&mii->mii_media, (m), (c), NULL)
    141 
    142 #if 0
    143 	/* Can't do this on the i82557! */
    144 	ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
    145 	    BMCR_ISO);
    146 #endif
    147 	ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
    148 	    BMCR_LOOP|BMCR_S100);
    149 
    150 	mii_phy_reset(sc);
    151 
    152 	sc->mii_capabilities =
    153 	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
    154 	printf("%s: ", sc->mii_dev.dv_xname);
    155 	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
    156 		printf("no media present");
    157 	else
    158 		mii_add_media(mii, sc->mii_capabilities,
    159 		    sc->mii_inst);
    160 	printf("\n");
    161 #undef ADD
    162 }
    163 
    164 int
    165 nsphy_service(sc, mii, cmd)
    166 	struct mii_softc *sc;
    167 	struct mii_data *mii;
    168 	int cmd;
    169 {
    170 	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
    171 	int reg;
    172 
    173 	switch (cmd) {
    174 	case MII_POLLSTAT:
    175 		/*
    176 		 * If we're not polling our PHY instance, just return.
    177 		 */
    178 		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
    179 			return (0);
    180 		break;
    181 
    182 	case MII_MEDIACHG:
    183 		/*
    184 		 * If the media indicates a different PHY instance,
    185 		 * isolate ourselves.
    186 		 */
    187 		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
    188 			reg = PHY_READ(sc, MII_BMCR);
    189 			PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
    190 			return (0);
    191 		}
    192 
    193 		/*
    194 		 * If the interface is not up, don't do anything.
    195 		 */
    196 		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
    197 			break;
    198 
    199 		reg = PHY_READ(sc, MII_NSPHY_PCR);
    200 
    201 		/*
    202 		 * Set up the PCR to use LED4 to indicate full-duplex
    203 		 * in both 10baseT and 100baseTX modes.
    204 		 */
    205 		reg |= PCR_LED4MODE;
    206 
    207 		/*
    208 		 * Make sure Carrier Intgrity Monitor function is
    209 		 * disabled (normal for Node operation, but sometimes
    210 		 * it's not set?!)
    211 		 */
    212 		reg |= PCR_CIMDIS;
    213 
    214 		/*
    215 		 * Make sure "force link good" is set to normal mode.
    216 		 * It's only intended for debugging.
    217 		 */
    218 		reg |= PCR_FLINK100;
    219 
    220 #if 0
    221 		/*
    222 		 * Mystery bits which are supposedly `reserved',
    223 		 * but we seem to need to set them when the PHY
    224 		 * is connected to some interfaces!
    225 		 */
    226 		reg |= 0x0100 | 0x0400;
    227 #endif
    228 
    229 		PHY_WRITE(sc, MII_NSPHY_PCR, reg);
    230 
    231 		switch (IFM_SUBTYPE(ife->ifm_media)) {
    232 		case IFM_AUTO:
    233 			/*
    234 			 * If we're already in auto mode, just return.
    235 			 */
    236 			if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN)
    237 				return (0);
    238 			(void) mii_phy_auto(sc, 1);
    239 			break;
    240 		case IFM_100_T4:
    241 			/*
    242 			 * XXX Not supported as a manual setting right now.
    243 			 */
    244 			return (EINVAL);
    245 		default:
    246 			/*
    247 			 * BMCR data is stored in the ifmedia entry.
    248 			 */
    249 			PHY_WRITE(sc, MII_ANAR,
    250 			    mii_anar(ife->ifm_media));
    251 			PHY_WRITE(sc, MII_BMCR, ife->ifm_data);
    252 		}
    253 		break;
    254 
    255 	case MII_TICK:
    256 		/*
    257 		 * If we're not currently selected, just return.
    258 		 */
    259 		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
    260 			return (0);
    261 
    262 		/*
    263 		 * Only used for autonegotiation.
    264 		 */
    265 		if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
    266 			return (0);
    267 
    268 		/*
    269 		 * Is the interface even up?
    270 		 */
    271 		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
    272 			return (0);
    273 
    274 		/*
    275 		 * Check to see if we have link.  If we do, we don't
    276 		 * need to restart the autonegotiation process.  Read
    277 		 * the BMSR twice in case it's latched.
    278 		 */
    279 		reg = PHY_READ(sc, MII_BMSR) |
    280 		    PHY_READ(sc, MII_BMSR);
    281 		if (reg & BMSR_LINK)
    282 			return (0);
    283 
    284 		/*
    285 		 * Only retry autonegotiation every 5 seconds.
    286 		 */
    287 		if (++sc->mii_ticks != 5)
    288 			return (0);
    289 
    290 		sc->mii_ticks = 0;
    291 		mii_phy_reset(sc);
    292 		if (mii_phy_auto(sc, 0) == EJUSTRETURN)
    293 			return (0);
    294 		break;
    295 	}
    296 
    297 	/* Update the media status. */
    298 	nsphy_status(sc);
    299 
    300 	/* Callback if something changed. */
    301 	if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) {
    302 		(*mii->mii_statchg)(sc->mii_dev.dv_parent);
    303 		sc->mii_active = mii->mii_media_active;
    304 	}
    305 	return (0);
    306 }
    307 
    308 void
    309 nsphy_status(sc)
    310 	struct mii_softc *sc;
    311 {
    312 	struct mii_data *mii = sc->mii_pdata;
    313 	int bmsr, bmcr, par, anlpar;
    314 
    315 	mii->mii_media_status = IFM_AVALID;
    316 	mii->mii_media_active = IFM_ETHER;
    317 
    318 	bmsr = PHY_READ(sc, MII_BMSR) |
    319 	    PHY_READ(sc, MII_BMSR);
    320 	if (bmsr & BMSR_LINK)
    321 		mii->mii_media_status |= IFM_ACTIVE;
    322 
    323 	bmcr = PHY_READ(sc, MII_BMCR);
    324 	if (bmcr & BMCR_ISO) {
    325 		mii->mii_media_active |= IFM_NONE;
    326 		mii->mii_media_status = 0;
    327 		return;
    328 	}
    329 
    330 	if (bmcr & BMCR_LOOP)
    331 		mii->mii_media_active |= IFM_LOOP;
    332 
    333 	if (bmcr & BMCR_AUTOEN) {
    334 		/*
    335 		 * The PAR status bits are only valid of autonegotiation
    336 		 * has completed (or it's disabled).
    337 		 */
    338 		if ((bmsr & BMSR_ACOMP) == 0) {
    339 			/* Erg, still trying, I guess... */
    340 			mii->mii_media_active |= IFM_NONE;
    341 			return;
    342 		}
    343 
    344 		/*
    345 		 * Argh.  The PAR doesn't seem to indicate duplex mode
    346 		 * properly!  Determine media based on link partner's
    347 		 * advertised capabilities.
    348 		 */
    349 		if (PHY_READ(sc, MII_ANER) & ANER_LPAN) {
    350 			anlpar = PHY_READ(sc, MII_ANAR) &
    351 			    PHY_READ(sc, MII_ANLPAR);
    352 			if (anlpar & ANLPAR_T4)
    353 				mii->mii_media_active |= IFM_100_T4;
    354 			else if (anlpar & ANLPAR_TX_FD)
    355 				mii->mii_media_active |= IFM_100_TX|IFM_FDX;
    356 			else if (anlpar & ANLPAR_TX)
    357 				mii->mii_media_active |= IFM_100_TX;
    358 			else if (anlpar & ANLPAR_10_FD)
    359 				mii->mii_media_active |= IFM_10_T|IFM_FDX;
    360 			else if (anlpar & ANLPAR_10)
    361 				mii->mii_media_active |= IFM_10_T;
    362 			else
    363 				mii->mii_media_active |= IFM_NONE;
    364 			return;
    365 		}
    366 
    367 		/*
    368 		 * Link partner is not capable of autonegotiation.
    369 		 * We will never be in full-duplex mode if this is
    370 		 * the case, so reading the PAR is OK.
    371 		 */
    372 		par = PHY_READ(sc, MII_NSPHY_PAR);
    373 		if (par & PAR_10)
    374 			mii->mii_media_active |= IFM_10_T;
    375 		else
    376 			mii->mii_media_active |= IFM_100_TX;
    377 #if 0
    378 		if (par & PAR_FDX)
    379 			mii->mii_media_active |= IFM_FDX;
    380 #endif
    381 	} else
    382 		mii->mii_media_active = mii_media_from_bmcr(bmcr);
    383 }
    384