Home | History | Annotate | Line # | Download | only in mii
nsphy.c revision 1.37
      1 /*	$NetBSD: nsphy.c,v 1.37 2002/09/30 21:57:49 thorpej Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
      9  * NASA Ames Research Center.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  * 3. All advertising materials mentioning features or use of this software
     20  *    must display the following acknowledgement:
     21  *	This product includes software developed by the NetBSD
     22  *	Foundation, Inc. and its contributors.
     23  * 4. Neither the name of The NetBSD Foundation nor the names of its
     24  *    contributors may be used to endorse or promote products derived
     25  *    from this software without specific prior written permission.
     26  *
     27  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     29  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     30  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     31  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     32  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     35  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     37  * POSSIBILITY OF SUCH DAMAGE.
     38  */
     39 
     40 /*
     41  * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
     42  *
     43  * Redistribution and use in source and binary forms, with or without
     44  * modification, are permitted provided that the following conditions
     45  * are met:
     46  * 1. Redistributions of source code must retain the above copyright
     47  *    notice, this list of conditions and the following disclaimer.
     48  * 2. Redistributions in binary form must reproduce the above copyright
     49  *    notice, this list of conditions and the following disclaimer in the
     50  *    documentation and/or other materials provided with the distribution.
     51  * 3. All advertising materials mentioning features or use of this software
     52  *    must display the following acknowledgement:
     53  *	This product includes software developed by Manuel Bouyer.
     54  * 4. The name of the author may not be used to endorse or promote products
     55  *    derived from this software without specific prior written permission.
     56  *
     57  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     58  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     59  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     60  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     61  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     62  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     63  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     64  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     65  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     66  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     67  */
     68 
     69 /*
     70  * driver for National Semiconductor's DP83840A ethernet 10/100 PHY
     71  * Data Sheet available from www.national.com
     72  */
     73 
     74 #include <sys/cdefs.h>
     75 __KERNEL_RCSID(0, "$NetBSD: nsphy.c,v 1.37 2002/09/30 21:57:49 thorpej Exp $");
     76 
     77 #include <sys/param.h>
     78 #include <sys/systm.h>
     79 #include <sys/kernel.h>
     80 #include <sys/device.h>
     81 #include <sys/socket.h>
     82 #include <sys/errno.h>
     83 
     84 #include <net/if.h>
     85 #include <net/if_media.h>
     86 
     87 #include <dev/mii/mii.h>
     88 #include <dev/mii/miivar.h>
     89 #include <dev/mii/miidevs.h>
     90 
     91 #include <dev/mii/nsphyreg.h>
     92 
     93 int	nsphymatch(struct device *, struct cfdata *, void *);
     94 void	nsphyattach(struct device *, struct device *, void *);
     95 
     96 CFATTACH_DECL(nsphy, sizeof(struct mii_softc),
     97     nsphymatch, nsphyattach, mii_phy_detach, mii_phy_activate)
     98 
     99 int	nsphy_service(struct mii_softc *, struct mii_data *, int);
    100 void	nsphy_status(struct mii_softc *);
    101 
    102 const struct mii_phy_funcs nsphy_funcs = {
    103 	nsphy_service, nsphy_status, mii_phy_reset,
    104 };
    105 
    106 const struct mii_phydesc nsphys[] = {
    107 	{ MII_OUI_xxNATSEMI,		MII_MODEL_xxNATSEMI_DP83840,
    108 	  MII_STR_xxNATSEMI_DP83840 },
    109 
    110 	{ 0,				0,
    111 	  NULL },
    112 };
    113 
    114 int
    115 nsphymatch(struct device *parent, struct cfdata *match, void *aux)
    116 {
    117 	struct mii_attach_args *ma = aux;
    118 
    119 	if (mii_phy_match(ma, nsphys) != NULL)
    120 		return (10);
    121 
    122 	return (0);
    123 }
    124 
    125 void
    126 nsphyattach(struct device *parent, struct device *self, void *aux)
    127 {
    128 	struct mii_softc *sc = (struct mii_softc *)self;
    129 	struct mii_attach_args *ma = aux;
    130 	struct mii_data *mii = ma->mii_data;
    131 	const struct mii_phydesc *mpd;
    132 
    133 	mpd = mii_phy_match(ma, nsphys);
    134 	printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
    135 
    136 	sc->mii_inst = mii->mii_instance;
    137 	sc->mii_phy = ma->mii_phyno;
    138 	sc->mii_funcs = &nsphy_funcs;
    139 	sc->mii_pdata = mii;
    140 	sc->mii_flags = ma->mii_flags;
    141 	sc->mii_anegticks = 5;
    142 
    143 	PHY_RESET(sc);
    144 
    145 	sc->mii_capabilities =
    146 	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
    147 	printf("%s: ", sc->mii_dev.dv_xname);
    148 	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
    149 		printf("no media present");
    150 	else
    151 		mii_phy_add_media(sc);
    152 	printf("\n");
    153 }
    154 
    155 int
    156 nsphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
    157 {
    158 	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
    159 	int reg;
    160 
    161 	if ((sc->mii_dev.dv_flags & DVF_ACTIVE) == 0)
    162 		return (ENXIO);
    163 
    164 	switch (cmd) {
    165 	case MII_POLLSTAT:
    166 		/*
    167 		 * If we're not polling our PHY instance, just return.
    168 		 */
    169 		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
    170 			return (0);
    171 		break;
    172 
    173 	case MII_MEDIACHG:
    174 		/*
    175 		 * If the media indicates a different PHY instance,
    176 		 * isolate ourselves.
    177 		 */
    178 		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
    179 			reg = PHY_READ(sc, MII_BMCR);
    180 			PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
    181 			return (0);
    182 		}
    183 
    184 		/*
    185 		 * If the interface is not up, don't do anything.
    186 		 */
    187 		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
    188 			break;
    189 
    190 		reg = PHY_READ(sc, MII_NSPHY_PCR);
    191 
    192 		/*
    193 		 * Set up the PCR to use LED4 to indicate full-duplex
    194 		 * in both 10baseT and 100baseTX modes.
    195 		 */
    196 		reg |= PCR_LED4MODE;
    197 
    198 		/*
    199 		 * Make sure Carrier Intgrity Monitor function is
    200 		 * disabled (normal for Node operation, but sometimes
    201 		 * it's not set?!)
    202 		 */
    203 		reg |= PCR_CIMDIS;
    204 
    205 		/*
    206 		 * Make sure "force link good" is set to normal mode.
    207 		 * It's only intended for debugging.
    208 		 */
    209 		reg |= PCR_FLINK100;
    210 
    211 		/*
    212 		 * Mystery bits which are supposedly `reserved',
    213 		 * but we seem to need to set them when the PHY
    214 		 * is connected to some interfaces:
    215 		 *
    216 		 * 0x0400 is needed for fxp
    217 		 *        (Intel EtherExpress Pro 10+/100B, 82557 chip)
    218 		 *        (nsphy with a DP83840 chip)
    219 		 * 0x0100 may be needed for some other card
    220 		 */
    221 		reg |= 0x0100 | 0x0400;
    222 
    223 		PHY_WRITE(sc, MII_NSPHY_PCR, reg);
    224 
    225 		mii_phy_setmedia(sc);
    226 		break;
    227 
    228 	case MII_TICK:
    229 		/*
    230 		 * If we're not currently selected, just return.
    231 		 */
    232 		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
    233 			return (0);
    234 
    235 		if (mii_phy_tick(sc) == EJUSTRETURN)
    236 			return (0);
    237 		break;
    238 
    239 	case MII_DOWN:
    240 		mii_phy_down(sc);
    241 		return (0);
    242 	}
    243 
    244 	/* Update the media status. */
    245 	mii_phy_status(sc);
    246 
    247 	/* Callback if something changed. */
    248 	mii_phy_update(sc, cmd);
    249 	return (0);
    250 }
    251 
    252 void
    253 nsphy_status(struct mii_softc *sc)
    254 {
    255 	struct mii_data *mii = sc->mii_pdata;
    256 	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
    257 	int bmsr, bmcr, par, anlpar;
    258 
    259 	mii->mii_media_status = IFM_AVALID;
    260 	mii->mii_media_active = IFM_ETHER;
    261 
    262 	bmsr = PHY_READ(sc, MII_BMSR) |
    263 	    PHY_READ(sc, MII_BMSR);
    264 	if (bmsr & BMSR_LINK)
    265 		mii->mii_media_status |= IFM_ACTIVE;
    266 
    267 	bmcr = PHY_READ(sc, MII_BMCR);
    268 	if (bmcr & BMCR_ISO) {
    269 		mii->mii_media_active |= IFM_NONE;
    270 		mii->mii_media_status = 0;
    271 		return;
    272 	}
    273 
    274 	if (bmcr & BMCR_LOOP)
    275 		mii->mii_media_active |= IFM_LOOP;
    276 
    277 	if (bmcr & BMCR_AUTOEN) {
    278 		/*
    279 		 * The PAR status bits are only valid of autonegotiation
    280 		 * has completed (or it's disabled).
    281 		 */
    282 		if ((bmsr & BMSR_ACOMP) == 0) {
    283 			/* Erg, still trying, I guess... */
    284 			mii->mii_media_active |= IFM_NONE;
    285 			return;
    286 		}
    287 
    288 		/*
    289 		 * Argh.  The PAR doesn't seem to indicate duplex mode
    290 		 * properly!  Determine media based on link partner's
    291 		 * advertised capabilities.
    292 		 */
    293 		if (PHY_READ(sc, MII_ANER) & ANER_LPAN) {
    294 			anlpar = PHY_READ(sc, MII_ANAR) &
    295 			    PHY_READ(sc, MII_ANLPAR);
    296 			if (anlpar & ANLPAR_T4)
    297 				mii->mii_media_active |= IFM_100_T4;
    298 			else if (anlpar & ANLPAR_TX_FD)
    299 				mii->mii_media_active |= IFM_100_TX|IFM_FDX;
    300 			else if (anlpar & ANLPAR_TX)
    301 				mii->mii_media_active |= IFM_100_TX;
    302 			else if (anlpar & ANLPAR_10_FD)
    303 				mii->mii_media_active |= IFM_10_T|IFM_FDX;
    304 			else if (anlpar & ANLPAR_10)
    305 				mii->mii_media_active |= IFM_10_T;
    306 			else
    307 				mii->mii_media_active |= IFM_NONE;
    308 			return;
    309 		}
    310 
    311 		/*
    312 		 * Link partner is not capable of autonegotiation.
    313 		 * We will never be in full-duplex mode if this is
    314 		 * the case, so reading the PAR is OK.
    315 		 */
    316 		par = PHY_READ(sc, MII_NSPHY_PAR);
    317 		if (par & PAR_10)
    318 			mii->mii_media_active |= IFM_10_T;
    319 		else
    320 			mii->mii_media_active |= IFM_100_TX;
    321 #if 0
    322 		if (par & PAR_FDX)
    323 			mii->mii_media_active |= IFM_FDX;
    324 #endif
    325 	} else
    326 		mii->mii_media_active = ife->ifm_media;
    327 }
    328