rgephy.c revision 1.45 1 /* $NetBSD: rgephy.c,v 1.45 2019/01/16 10:10:49 msaitoh Exp $ */
2
3 /*
4 * Copyright (c) 2003
5 * Bill Paul <wpaul (at) windriver.com>. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 #include <sys/cdefs.h>
36 __KERNEL_RCSID(0, "$NetBSD: rgephy.c,v 1.45 2019/01/16 10:10:49 msaitoh Exp $");
37
38
39 /*
40 * Driver for the RealTek 8169S/8110S internal 10/100/1000 PHY.
41 */
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/kernel.h>
46 #include <sys/device.h>
47 #include <sys/socket.h>
48
49
50 #include <net/if.h>
51 #include <net/if_media.h>
52
53 #include <dev/mii/mii.h>
54 #include <dev/mii/mdio.h>
55 #include <dev/mii/miivar.h>
56 #include <dev/mii/miidevs.h>
57
58 #include <dev/mii/rgephyreg.h>
59
60 #include <dev/ic/rtl81x9reg.h>
61
62 static int rgephy_match(device_t, cfdata_t, void *);
63 static void rgephy_attach(device_t, device_t, void *);
64
65 struct rgephy_softc {
66 struct mii_softc mii_sc;
67 bool mii_no_rx_delay;
68 };
69
70 CFATTACH_DECL_NEW(rgephy, sizeof(struct rgephy_softc),
71 rgephy_match, rgephy_attach, mii_phy_detach, mii_phy_activate);
72
73
74 static int rgephy_service(struct mii_softc *, struct mii_data *, int);
75 static void rgephy_status(struct mii_softc *);
76 static int rgephy_mii_phy_auto(struct mii_softc *);
77 static void rgephy_reset(struct mii_softc *);
78 static void rgephy_loop(struct mii_softc *);
79 static void rgephy_load_dspcode(struct mii_softc *);
80
81 static const struct mii_phy_funcs rgephy_funcs = {
82 rgephy_service, rgephy_status, rgephy_reset,
83 };
84
85 static const struct mii_phydesc rgephys[] = {
86 { MII_OUI_xxREALTEK, MII_MODEL_xxREALTEK_RTL8169S,
87 MII_STR_xxREALTEK_RTL8169S },
88
89 { MII_OUI_REALTEK, MII_MODEL_REALTEK_RTL8169S,
90 MII_STR_REALTEK_RTL8169S },
91
92 { MII_OUI_REALTEK, MII_MODEL_REALTEK_RTL8251,
93 MII_STR_REALTEK_RTL8251 },
94
95 { 0, 0,
96 NULL }
97 };
98
99 static int
100 rgephy_match(device_t parent, cfdata_t match, void *aux)
101 {
102 struct mii_attach_args *ma = aux;
103
104 if (mii_phy_match(ma, rgephys) != NULL)
105 return 10;
106
107 return 0;
108 }
109
110 static void
111 rgephy_attach(device_t parent, device_t self, void *aux)
112 {
113 struct rgephy_softc *rsc = device_private(self);
114 prop_dictionary_t prop = device_properties(self);
115 struct mii_softc *sc = &rsc->mii_sc;
116 struct mii_attach_args *ma = aux;
117 struct mii_data *mii = ma->mii_data;
118 const struct mii_phydesc *mpd;
119 int rev;
120 const char *sep = "";
121
122 ma = aux;
123 mii = ma->mii_data;
124
125 rev = MII_REV(ma->mii_id2);
126 mpd = mii_phy_match(ma, rgephys);
127 aprint_naive(": Media interface\n");
128 aprint_normal(": %s, rev. %d\n", mpd->mpd_name, rev);
129
130 sc->mii_dev = self;
131 sc->mii_inst = mii->mii_instance;
132 sc->mii_phy = ma->mii_phyno;
133 sc->mii_mpd_oui = MII_OUI(ma->mii_id1, ma->mii_id2);
134 sc->mii_mpd_model = MII_MODEL(ma->mii_id2);
135 sc->mii_mpd_rev = MII_REV(ma->mii_id2);
136 sc->mii_pdata = mii;
137 sc->mii_flags = ma->mii_flags;
138 sc->mii_anegticks = MII_ANEGTICKS_GIGE;
139
140 sc->mii_funcs = &rgephy_funcs;
141
142 prop_dictionary_get_bool(prop, "no-rx-delay", &rsc->mii_no_rx_delay);
143
144 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
145 #define PRINT(n) aprint_normal("%s%s", sep, (n)); sep = ", "
146
147 #ifdef __FreeBSD__
148 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
149 BMCR_LOOP|BMCR_S100);
150 #endif
151
152 sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
153 sc->mii_capabilities &= ~BMSR_ANEG;
154
155 /*
156 * FreeBSD does not check EXSTAT, but instead adds gigabit
157 * media explicitly. Why?
158 */
159 aprint_normal_dev(self, "");
160 if (sc->mii_capabilities & BMSR_EXTSTAT) {
161 sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
162 }
163 mii_phy_add_media(sc);
164
165 /* rtl8169S does not report auto-sense; add manually. */
166 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), MII_NMEDIA);
167 sep =", ";
168 PRINT("auto");
169
170 #undef ADD
171 #undef PRINT
172
173 rgephy_reset(sc);
174 aprint_normal("\n");
175 }
176
177 static int
178 rgephy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
179 {
180 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
181 int reg, speed, gig, anar;
182
183 switch (cmd) {
184 case MII_POLLSTAT:
185 /*
186 * If we're not polling our PHY instance, just return.
187 */
188 if (IFM_INST(ife->ifm_media) != sc->mii_inst)
189 return 0;
190 break;
191
192 case MII_MEDIACHG:
193 /*
194 * If the media indicates a different PHY instance,
195 * isolate ourselves.
196 */
197 if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
198 reg = PHY_READ(sc, MII_BMCR);
199 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
200 return 0;
201 }
202
203 /*
204 * If the interface is not up, don't do anything.
205 */
206 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
207 break;
208
209 rgephy_reset(sc); /* XXX hardware bug work-around */
210
211 anar = PHY_READ(sc, MII_ANAR);
212 anar &= ~(ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10);
213
214 switch (IFM_SUBTYPE(ife->ifm_media)) {
215 case IFM_AUTO:
216 #ifdef foo
217 /*
218 * If we're already in auto mode, just return.
219 */
220 if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN)
221 return 0;
222 #endif
223 (void)rgephy_mii_phy_auto(sc);
224 break;
225 case IFM_1000_T:
226 speed = BMCR_S1000;
227 goto setit;
228 case IFM_100_TX:
229 speed = BMCR_S100;
230 anar |= ANAR_TX_FD | ANAR_TX;
231 goto setit;
232 case IFM_10_T:
233 speed = BMCR_S10;
234 anar |= ANAR_10_FD | ANAR_10;
235 setit:
236 rgephy_loop(sc);
237 if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) {
238 speed |= BMCR_FDX;
239 gig = GTCR_ADV_1000TFDX;
240 anar &= ~(ANAR_TX | ANAR_10);
241 } else {
242 gig = GTCR_ADV_1000THDX;
243 anar &= ~(ANAR_TX_FD | ANAR_10_FD);
244 }
245
246 if (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T) {
247 PHY_WRITE(sc, MII_100T2CR, 0);
248 PHY_WRITE(sc, MII_ANAR, anar);
249 PHY_WRITE(sc, MII_BMCR, speed |
250 BMCR_AUTOEN | BMCR_STARTNEG);
251 break;
252 }
253
254 /*
255 * When setting the link manually, one side must
256 * be the master and the other the slave. However
257 * ifmedia doesn't give us a good way to specify
258 * this, so we fake it by using one of the LINK
259 * flags. If LINK0 is set, we program the PHY to
260 * be a master, otherwise it's a slave.
261 */
262 if ((mii->mii_ifp->if_flags & IFF_LINK0)) {
263 PHY_WRITE(sc, MII_100T2CR,
264 gig|GTCR_MAN_MS|GTCR_ADV_MS);
265 } else {
266 PHY_WRITE(sc, MII_100T2CR, gig|GTCR_MAN_MS);
267 }
268 PHY_WRITE(sc, MII_BMCR, speed |
269 BMCR_AUTOEN | BMCR_STARTNEG);
270 break;
271 case IFM_NONE:
272 PHY_WRITE(sc, MII_BMCR, BMCR_ISO|BMCR_PDOWN);
273 break;
274 case IFM_100_T4:
275 default:
276 return EINVAL;
277 }
278 break;
279
280 case MII_TICK:
281 /*
282 * If we're not currently selected, just return.
283 */
284 if (IFM_INST(ife->ifm_media) != sc->mii_inst)
285 return 0;
286
287 /*
288 * Is the interface even up?
289 */
290 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
291 return 0;
292
293 /*
294 * Only used for autonegotiation.
295 */
296 if ((IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) &&
297 (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)) {
298 /*
299 * Reset autonegotiation timer to 0 to make sure
300 * the future autonegotiation start with 0.
301 */
302 sc->mii_ticks = 0;
303 break;
304 }
305
306 /*
307 * Check to see if we have link. If we do, we don't
308 * need to restart the autonegotiation process. Read
309 * the BMSR twice in case it's latched.
310 */
311 if (sc->mii_mpd_rev >= RGEPHY_8211F) {
312 /* RTL8211F */
313 reg = PHY_READ(sc, RGEPHY_MII_PHYSR);
314 if (reg & RGEPHY_PHYSR_LINK) {
315 sc->mii_ticks = 0;
316 break;
317 }
318 } else if (sc->mii_mpd_rev >= RGEPHY_8211B) {
319 /* RTL8211B(L) */
320 reg = PHY_READ(sc, RGEPHY_MII_SSR);
321 if (reg & RGEPHY_SSR_LINK) {
322 sc->mii_ticks = 0;
323 break;
324 }
325 } else {
326 reg = PHY_READ(sc, RTK_GMEDIASTAT);
327 if ((reg & RTK_GMEDIASTAT_LINK) != 0) {
328 sc->mii_ticks = 0;
329 break;
330 }
331 }
332
333 /* Announce link loss right after it happens. */
334 if (sc->mii_ticks++ == 0)
335 break;
336
337 /* Only retry autonegotiation every mii_anegticks seconds. */
338 if (sc->mii_ticks <= sc->mii_anegticks)
339 return 0;
340
341 rgephy_mii_phy_auto(sc);
342 break;
343 }
344
345 /* Update the media status. */
346 rgephy_status(sc);
347
348 /*
349 * Callback if something changed. Note that we need to poke
350 * the DSP on the RealTek PHYs if the media changes.
351 *
352 */
353 if (sc->mii_media_active != mii->mii_media_active ||
354 sc->mii_media_status != mii->mii_media_status ||
355 cmd == MII_MEDIACHG) {
356 rgephy_load_dspcode(sc);
357 }
358 mii_phy_update(sc, cmd);
359 return 0;
360 }
361
362 static void
363 rgephy_status(struct mii_softc *sc)
364 {
365 struct mii_data *mii = sc->mii_pdata;
366 int gstat, bmsr, bmcr, physr;
367 uint16_t ssr;
368
369 mii->mii_media_status = IFM_AVALID;
370 mii->mii_media_active = IFM_ETHER;
371
372 if (sc->mii_mpd_rev >= RGEPHY_8211F) {
373 physr = PHY_READ(sc, RGEPHY_MII_PHYSR);
374 if (physr & RGEPHY_PHYSR_LINK)
375 mii->mii_media_status |= IFM_ACTIVE;
376 } else if (sc->mii_mpd_rev >= RGEPHY_8211B) {
377 ssr = PHY_READ(sc, RGEPHY_MII_SSR);
378 if (ssr & RGEPHY_SSR_LINK)
379 mii->mii_media_status |= IFM_ACTIVE;
380 } else {
381 gstat = PHY_READ(sc, RTK_GMEDIASTAT);
382 if ((gstat & RTK_GMEDIASTAT_LINK) != 0)
383 mii->mii_media_status |= IFM_ACTIVE;
384 }
385
386 bmsr = PHY_READ(sc, MII_BMSR);
387 bmcr = PHY_READ(sc, MII_BMCR);
388
389 if ((bmcr & BMCR_ISO) != 0) {
390 mii->mii_media_active |= IFM_NONE;
391 mii->mii_media_status = 0;
392 return;
393 }
394
395 if ((bmcr & BMCR_LOOP) != 0)
396 mii->mii_media_active |= IFM_LOOP;
397
398 if ((bmcr & BMCR_AUTOEN) != 0) {
399 if ((bmsr & BMSR_ACOMP) == 0) {
400 /* Erg, still trying, I guess... */
401 mii->mii_media_active |= IFM_NONE;
402 return;
403 }
404 }
405
406 if (sc->mii_mpd_rev >= RGEPHY_8211F) {
407 physr = PHY_READ(sc, RGEPHY_MII_PHYSR);
408 switch (__SHIFTOUT(physr, RGEPHY_PHYSR_SPEED)) {
409 case RGEPHY_PHYSR_SPEED_1000:
410 mii->mii_media_active |= IFM_1000_T;
411 break;
412 case RGEPHY_PHYSR_SPEED_100:
413 mii->mii_media_active |= IFM_100_TX;
414 break;
415 case RGEPHY_PHYSR_SPEED_10:
416 mii->mii_media_active |= IFM_10_T;
417 break;
418 default:
419 mii->mii_media_active |= IFM_NONE;
420 break;
421 }
422 if (physr & RGEPHY_PHYSR_DUPLEX)
423 mii->mii_media_active |= mii_phy_flowstatus(sc) |
424 IFM_FDX;
425 else
426 mii->mii_media_active |= IFM_HDX;
427 } else if (sc->mii_mpd_rev >= RGEPHY_8211B) {
428 ssr = PHY_READ(sc, RGEPHY_MII_SSR);
429 switch (ssr & RGEPHY_SSR_SPD_MASK) {
430 case RGEPHY_SSR_S1000:
431 mii->mii_media_active |= IFM_1000_T;
432 break;
433 case RGEPHY_SSR_S100:
434 mii->mii_media_active |= IFM_100_TX;
435 break;
436 case RGEPHY_SSR_S10:
437 mii->mii_media_active |= IFM_10_T;
438 break;
439 default:
440 mii->mii_media_active |= IFM_NONE;
441 break;
442 }
443 if (ssr & RGEPHY_SSR_FDX)
444 mii->mii_media_active |= mii_phy_flowstatus(sc) |
445 IFM_FDX;
446 else
447 mii->mii_media_active |= IFM_HDX;
448 } else {
449 gstat = PHY_READ(sc, RTK_GMEDIASTAT);
450 if ((gstat & RTK_GMEDIASTAT_1000MBPS) != 0)
451 mii->mii_media_active |= IFM_1000_T;
452 else if ((gstat & RTK_GMEDIASTAT_100MBPS) != 0)
453 mii->mii_media_active |= IFM_100_TX;
454 else if ((gstat & RTK_GMEDIASTAT_10MBPS) != 0)
455 mii->mii_media_active |= IFM_10_T;
456 else
457 mii->mii_media_active |= IFM_NONE;
458 if ((gstat & RTK_GMEDIASTAT_FDX) != 0)
459 mii->mii_media_active |= mii_phy_flowstatus(sc) |
460 IFM_FDX;
461 else
462 mii->mii_media_active |= IFM_HDX;
463 }
464 }
465
466
467 static int
468 rgephy_mii_phy_auto(struct mii_softc *mii)
469 {
470 int anar;
471
472 mii->mii_ticks = 0;
473 rgephy_loop(mii);
474 rgephy_reset(mii);
475
476 anar = BMSR_MEDIA_TO_ANAR(mii->mii_capabilities) | ANAR_CSMA;
477 if (mii->mii_flags & MIIF_DOPAUSE)
478 anar |= ANAR_FC | ANAR_PAUSE_ASYM;
479
480 PHY_WRITE(mii, MII_ANAR, anar);
481 DELAY(1000);
482 PHY_WRITE(mii, MII_100T2CR, GTCR_ADV_1000THDX | GTCR_ADV_1000TFDX);
483 DELAY(1000);
484 PHY_WRITE(mii, MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG);
485 DELAY(100);
486
487 return EJUSTRETURN;
488 }
489
490 static void
491 rgephy_loop(struct mii_softc *sc)
492 {
493 uint32_t bmsr;
494 int i;
495
496 if (sc->mii_mpd_model != MII_MODEL_REALTEK_RTL8251 &&
497 sc->mii_mpd_rev < RGEPHY_8211B) {
498 PHY_WRITE(sc, MII_BMCR, BMCR_PDOWN);
499 DELAY(1000);
500 }
501
502 for (i = 0; i < 15000; i++) {
503 bmsr = PHY_READ(sc, MII_BMSR);
504 if ((bmsr & BMSR_LINK) == 0) {
505 #if 0
506 device_printf(sc->mii_dev, "looped %d\n", i);
507 #endif
508 break;
509 }
510 DELAY(10);
511 }
512 }
513
514 #define PHY_SETBIT(x, y, z) \
515 PHY_WRITE(x, y, (PHY_READ(x, y) | (z)))
516 #define PHY_CLRBIT(x, y, z) \
517 PHY_WRITE(x, y, (PHY_READ(x, y) & ~(z)))
518
519 /*
520 * Initialize RealTek PHY per the datasheet. The DSP in the PHYs of
521 * existing revisions of the 8169S/8110S chips need to be tuned in
522 * order to reliably negotiate a 1000Mbps link. This is only needed
523 * for rev 0 and rev 1 of the PHY. Later versions work without
524 * any fixups.
525 */
526 static void
527 rgephy_load_dspcode(struct mii_softc *sc)
528 {
529 int val;
530
531 if (sc->mii_mpd_model == MII_MODEL_REALTEK_RTL8251 ||
532 sc->mii_mpd_rev >= RGEPHY_8211B)
533 return;
534
535 #if 1
536 PHY_WRITE(sc, 31, 0x0001);
537 PHY_WRITE(sc, 21, 0x1000);
538 PHY_WRITE(sc, 24, 0x65C7);
539 PHY_CLRBIT(sc, 4, 0x0800);
540 val = PHY_READ(sc, 4) & 0xFFF;
541 PHY_WRITE(sc, 4, val);
542 PHY_WRITE(sc, 3, 0x00A1);
543 PHY_WRITE(sc, 2, 0x0008);
544 PHY_WRITE(sc, 1, 0x1020);
545 PHY_WRITE(sc, 0, 0x1000);
546 PHY_SETBIT(sc, 4, 0x0800);
547 PHY_CLRBIT(sc, 4, 0x0800);
548 val = (PHY_READ(sc, 4) & 0xFFF) | 0x7000;
549 PHY_WRITE(sc, 4, val);
550 PHY_WRITE(sc, 3, 0xFF41);
551 PHY_WRITE(sc, 2, 0xDE60);
552 PHY_WRITE(sc, 1, 0x0140);
553 PHY_WRITE(sc, 0, 0x0077);
554 val = (PHY_READ(sc, 4) & 0xFFF) | 0xA000;
555 PHY_WRITE(sc, 4, val);
556 PHY_WRITE(sc, 3, 0xDF01);
557 PHY_WRITE(sc, 2, 0xDF20);
558 PHY_WRITE(sc, 1, 0xFF95);
559 PHY_WRITE(sc, 0, 0xFA00);
560 val = (PHY_READ(sc, 4) & 0xFFF) | 0xB000;
561 PHY_WRITE(sc, 4, val);
562 PHY_WRITE(sc, 3, 0xFF41);
563 PHY_WRITE(sc, 2, 0xDE20);
564 PHY_WRITE(sc, 1, 0x0140);
565 PHY_WRITE(sc, 0, 0x00BB);
566 val = (PHY_READ(sc, 4) & 0xFFF) | 0xF000;
567 PHY_WRITE(sc, 4, val);
568 PHY_WRITE(sc, 3, 0xDF01);
569 PHY_WRITE(sc, 2, 0xDF20);
570 PHY_WRITE(sc, 1, 0xFF95);
571 PHY_WRITE(sc, 0, 0xBF00);
572 PHY_SETBIT(sc, 4, 0x0800);
573 PHY_CLRBIT(sc, 4, 0x0800);
574 PHY_WRITE(sc, 31, 0x0000);
575 #else
576 (void)val;
577 PHY_WRITE(sc, 0x1f, 0x0001);
578 PHY_WRITE(sc, 0x15, 0x1000);
579 PHY_WRITE(sc, 0x18, 0x65c7);
580 PHY_WRITE(sc, 0x04, 0x0000);
581 PHY_WRITE(sc, 0x03, 0x00a1);
582 PHY_WRITE(sc, 0x02, 0x0008);
583 PHY_WRITE(sc, 0x01, 0x1020);
584 PHY_WRITE(sc, 0x00, 0x1000);
585 PHY_WRITE(sc, 0x04, 0x0800);
586 PHY_WRITE(sc, 0x04, 0x0000);
587 PHY_WRITE(sc, 0x04, 0x7000);
588 PHY_WRITE(sc, 0x03, 0xff41);
589 PHY_WRITE(sc, 0x02, 0xde60);
590 PHY_WRITE(sc, 0x01, 0x0140);
591 PHY_WRITE(sc, 0x00, 0x0077);
592 PHY_WRITE(sc, 0x04, 0x7800);
593 PHY_WRITE(sc, 0x04, 0x7000);
594 PHY_WRITE(sc, 0x04, 0xa000);
595 PHY_WRITE(sc, 0x03, 0xdf01);
596 PHY_WRITE(sc, 0x02, 0xdf20);
597 PHY_WRITE(sc, 0x01, 0xff95);
598 PHY_WRITE(sc, 0x00, 0xfa00);
599 PHY_WRITE(sc, 0x04, 0xa800);
600 PHY_WRITE(sc, 0x04, 0xa000);
601 PHY_WRITE(sc, 0x04, 0xb000);
602 PHY_WRITE(sc, 0x0e, 0xff41);
603 PHY_WRITE(sc, 0x02, 0xde20);
604 PHY_WRITE(sc, 0x01, 0x0140);
605 PHY_WRITE(sc, 0x00, 0x00bb);
606 PHY_WRITE(sc, 0x04, 0xb800);
607 PHY_WRITE(sc, 0x04, 0xb000);
608 PHY_WRITE(sc, 0x04, 0xf000);
609 PHY_WRITE(sc, 0x03, 0xdf01);
610 PHY_WRITE(sc, 0x02, 0xdf20);
611 PHY_WRITE(sc, 0x01, 0xff95);
612 PHY_WRITE(sc, 0x00, 0xbf00);
613 PHY_WRITE(sc, 0x04, 0xf800);
614 PHY_WRITE(sc, 0x04, 0xf000);
615 PHY_WRITE(sc, 0x04, 0x0000);
616 PHY_WRITE(sc, 0x1f, 0x0000);
617 PHY_WRITE(sc, 0x0b, 0x0000);
618
619 #endif
620
621 DELAY(40);
622 }
623
624 static void
625 rgephy_reset(struct mii_softc *sc)
626 {
627 struct rgephy_softc *rsc = (struct rgephy_softc *)sc;
628 uint16_t ssr, phycr1;
629
630 mii_phy_reset(sc);
631 DELAY(1000);
632
633 if (sc->mii_mpd_model != MII_MODEL_REALTEK_RTL8251 &&
634 sc->mii_mpd_rev < RGEPHY_8211B) {
635 rgephy_load_dspcode(sc);
636 } else if (sc->mii_mpd_rev == RGEPHY_8211C) {
637 /* RTL8211C(L) */
638 ssr = PHY_READ(sc, RGEPHY_MII_SSR);
639 if ((ssr & RGEPHY_SSR_ALDPS) != 0) {
640 ssr &= ~RGEPHY_SSR_ALDPS;
641 PHY_WRITE(sc, RGEPHY_MII_SSR, ssr);
642 }
643 } else if (sc->mii_mpd_rev == RGEPHY_8211E) {
644 /* RTL8211E */
645 if (rsc->mii_no_rx_delay) {
646 /* Disable RX internal delay (undocumented) */
647 PHY_WRITE(sc, 0x1f, 0x0007);
648 PHY_WRITE(sc, 0x1e, 0x00a4);
649 PHY_WRITE(sc, 0x1c, 0xb591);
650 PHY_WRITE(sc, 0x1f, 0x0000);
651 }
652 } else if (sc->mii_mpd_rev == RGEPHY_8211F) {
653 /* RTL8211F */
654 phycr1 = PHY_READ(sc, RGEPHY_MII_PHYCR1);
655 phycr1 &= ~RGEPHY_PHYCR1_MDI_MMCE;
656 phycr1 &= ~RGEPHY_PHYCR1_ALDPS_EN;
657 PHY_WRITE(sc, RGEPHY_MII_PHYCR1, phycr1);
658 } else {
659 PHY_WRITE(sc, 0x1F, 0x0000);
660 PHY_WRITE(sc, 0x0e, 0x0000);
661 }
662
663 /* Reset capabilities */
664 /* Step1: write our capability */
665 /* 10/100 capability */
666 PHY_WRITE(sc, MII_ANAR,
667 ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10 | ANAR_CSMA);
668 /* 1000 capability */
669 PHY_WRITE(sc, MII_100T2CR, GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX);
670
671 /* Step2: Restart NWay */
672 /* NWay enable and Restart NWay */
673 PHY_WRITE(sc, MII_BMCR, BMCR_RESET | BMCR_AUTOEN | BMCR_STARTNEG);
674
675 if (sc->mii_mpd_rev == RGEPHY_8211F) {
676 /* RTL8211F */
677 delay(10000);
678 /* disable EEE */
679 PHY_WRITE(sc, MII_MMDACR, MMDACR_FN_ADDRESS | MDIO_MMD_AN);
680 PHY_WRITE(sc, MII_MMDAADR, MDIO_AN_EEEADVERT);
681 PHY_WRITE(sc, MII_MMDACR, MMDACR_FN_DATANPI | MDIO_MMD_AN);
682 PHY_WRITE(sc, MII_MMDAADR, 0x0000);
683 }
684 }
685