sqphy.c revision 1.53
1 /* $NetBSD: sqphy.c,v 1.53 2019/02/24 17:22:21 christos Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Copyright (c) 1997 Manuel Bouyer. All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 45 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 46 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 47 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 48 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 49 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 50 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 51 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 52 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 53 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 54 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 55 */ 56 57 /* 58 * driver for Seeq 80220/80221, 80223, and 80225 10/100 ethernet PHYs 59 * datasheet from www.seeq.com 60 */ 61 62 #include <sys/cdefs.h> 63 __KERNEL_RCSID(0, "$NetBSD: sqphy.c,v 1.53 2019/02/24 17:22:21 christos Exp $"); 64 65 #include <sys/param.h> 66 #include <sys/systm.h> 67 #include <sys/kernel.h> 68 #include <sys/device.h> 69 #include <sys/socket.h> 70 #include <sys/errno.h> 71 72 #include <net/if.h> 73 #include <net/if_media.h> 74 75 #include <dev/mii/mii.h> 76 #include <dev/mii/miivar.h> 77 #include <dev/mii/miidevs.h> 78 79 #include <dev/mii/sqphyreg.h> 80 81 static int sqphymatch(device_t, cfdata_t, void *); 82 static void sqphyattach(device_t, device_t, void *); 83 84 CFATTACH_DECL_NEW(sqphy, sizeof(struct mii_softc), 85 sqphymatch, sqphyattach, mii_phy_detach, mii_phy_activate); 86 87 static int sqphy_service(struct mii_softc *, struct mii_data *, int); 88 static void sqphy_status(struct mii_softc *); 89 static void sqphy_84220_reset(struct mii_softc *); 90 91 static const struct mii_phy_funcs sqphy_funcs = { 92 sqphy_service, sqphy_status, mii_phy_reset, 93 }; 94 95 static const struct mii_phy_funcs sqphy_84220_funcs = { 96 sqphy_service, sqphy_status, sqphy_84220_reset, 97 }; 98 99 static const struct mii_phydesc sqphys[] = { 100 MII_PHY_DESC(SEEQ, 80220), 101 MII_PHY_DESC(SEEQ, 80225), 102 MII_PHY_DESC(SEEQ, 84220), 103 MII_PHY_END, 104 }; 105 106 static int 107 sqphymatch(device_t parent, cfdata_t match, void *aux) 108 { 109 struct mii_attach_args *ma = aux; 110 111 if (mii_phy_match(ma, sqphys) != NULL) 112 return (10); 113 114 return (0); 115 } 116 117 static void 118 sqphyattach(device_t parent, device_t self, void *aux) 119 { 120 struct mii_softc *sc = device_private(self); 121 struct mii_attach_args *ma = aux; 122 struct mii_data *mii = ma->mii_data; 123 const struct mii_phydesc *mpd; 124 125 mpd = mii_phy_match(ma, sqphys); 126 aprint_naive(": Media interface\n"); 127 aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); 128 129 sc->mii_dev = self; 130 sc->mii_inst = mii->mii_instance; 131 sc->mii_phy = ma->mii_phyno; 132 sc->mii_pdata = mii; 133 sc->mii_flags = ma->mii_flags; 134 sc->mii_anegticks = MII_ANEGTICKS; 135 136 switch (MII_MODEL(ma->mii_id2)) { 137 case MII_MODEL_SEEQ_84220: 138 sc->mii_funcs = &sqphy_84220_funcs; 139 aprint_normal_dev(self, 140 "using Seeq 84220 isolate/reset hack\n"); 141 break; 142 143 default: 144 sc->mii_funcs = &sqphy_funcs; 145 } 146 147 PHY_RESET(sc); 148 149 PHY_READ(sc, MII_BMSR, &sc->mii_capabilities); 150 sc->mii_capabilities &= ma->mii_capmask; 151 aprint_normal_dev(self, ""); 152 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 153 aprint_error("no media present"); 154 else 155 mii_phy_add_media(sc); 156 aprint_normal("\n"); 157 } 158 159 static int 160 sqphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 161 { 162 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 163 uint16_t reg; 164 165 switch (cmd) { 166 case MII_POLLSTAT: 167 /* 168 * If we're not polling our PHY instance, just return. 169 */ 170 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 171 return (0); 172 break; 173 174 case MII_MEDIACHG: 175 /* 176 * If the media indicates a different PHY instance, 177 * isolate ourselves. 178 */ 179 if (IFM_INST(ife->ifm_media) != sc->mii_inst) { 180 PHY_READ(sc, MII_BMCR, ®); 181 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 182 return (0); 183 } 184 185 /* 186 * If the interface is not up, don't do anything. 187 */ 188 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 189 break; 190 191 mii_phy_setmedia(sc); 192 break; 193 194 case MII_TICK: 195 /* 196 * If we're not currently selected, just return. 197 */ 198 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 199 return (0); 200 201 if (mii_phy_tick(sc) == EJUSTRETURN) 202 return (0); 203 break; 204 205 case MII_DOWN: 206 mii_phy_down(sc); 207 return (0); 208 } 209 210 /* Update the media status. */ 211 mii_phy_status(sc); 212 213 /* Callback if something changed. */ 214 mii_phy_update(sc, cmd); 215 return (0); 216 } 217 218 static void 219 sqphy_status(struct mii_softc *sc) 220 { 221 struct mii_data *mii = sc->mii_pdata; 222 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 223 uint16_t bmsr, bmcr, status; 224 225 mii->mii_media_status = IFM_AVALID; 226 mii->mii_media_active = IFM_ETHER; 227 228 PHY_READ(sc, MII_BMSR, &bmsr); 229 PHY_READ(sc, MII_BMSR, &bmsr); 230 if (bmsr & BMSR_LINK) 231 mii->mii_media_status |= IFM_ACTIVE; 232 233 PHY_READ(sc, MII_BMCR, &bmcr); 234 if (bmcr & BMCR_ISO) { 235 mii->mii_media_active |= IFM_NONE; 236 mii->mii_media_status = 0; 237 return; 238 } 239 240 if (bmcr & BMCR_LOOP) 241 mii->mii_media_active |= IFM_LOOP; 242 243 if (bmcr & BMCR_AUTOEN) { 244 if ((bmsr & BMSR_ACOMP) == 0) { 245 /* Erg, still trying, I guess... */ 246 mii->mii_media_active |= IFM_NONE; 247 return; 248 } 249 /* 250 * Note: don't get fancy here -- the 80225 only 251 * supports the SPD_DET and DPLX_DET bits in 252 * the STATUS register. 253 */ 254 PHY_READ(sc, MII_SQPHY_STATUS, &status); 255 if (status & STATUS_SPD_DET) 256 mii->mii_media_active |= IFM_100_TX; 257 else 258 mii->mii_media_active |= IFM_10_T; 259 if (status & STATUS_DPLX_DET) 260 mii->mii_media_active |= IFM_FDX; 261 else 262 mii->mii_media_active |= IFM_HDX; 263 } else 264 mii->mii_media_active = ife->ifm_media; 265 } 266 267 static void 268 sqphy_84220_reset(struct mii_softc *sc) 269 { 270 uint16_t reg; 271 272 mii_phy_reset(sc); 273 274 /* 275 * This PHY sometimes insists on coming out of reset isolated, 276 * even when the MDA[0-3] pins are pulled high (to indicate 277 * PHY address 0), contrary to the device's datasheet. 278 * 279 * Morever, simply clearing BMCR_ISO here isn't enough; the 280 * change won't stick until about 30mS *after* the PHY has 281 * been reset. 282 * 283 * This sucks. 284 */ 285 if ((sc->mii_inst != 0) && ((sc->mii_flags & MIIF_NOISOLATE) == 0)) 286 return; 287 288 PHY_READ(sc, MII_BMCR, ®); 289 while ((reg & BMCR_ISO) != 0) { 290 delay(35000); 291 PHY_WRITE(sc, MII_BMCR, reg & ~BMCR_ISO); 292 delay(35000); 293 PHY_READ(sc, MII_BMCR, ®); 294 } 295 } 296
Indexes created Thu Sep 25 16:09:42 GMT 2025