Home | History | Annotate | Line # | Download | only in pci
auixp.c revision 1.4
      1 /* $NetBSD: auixp.c,v 1.4 2005/01/13 00:48:01 simonb Exp $ */
      2 
      3 /*
      4  * Copyright (c) 2004, 2005 Reinoud Zandijk <reinoud (at) netbsd.org>
      5  * All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. The name of the author may not be used to endorse or promote products
     13  *    derived from this software without specific prior written permission.
     14  * 3. All advertising materials mentioning features or use of this software
     15  *    must display the following acknowledgement:
     16  *	This product includes software developed by the NetBSD
     17  *	Foundation, Inc. and its contributors.
     18  * 4. Neither the name of The NetBSD Foundation nor the names of its
     19  *    contributors may be used to endorse or promote products derived
     20  *    from this software without specific prior written permission.
     21  *
     22  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     23  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     24  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     25  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
     29  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
     30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     32  * SUCH DAMAGE.
     33  */
     34 
     35 
     36 /*
     37  * NetBSD audio driver for ATI IXP-{150,200,...} audio driver hardware.
     38  *
     39  * Recording and playback has been tested OK on various sample rates and
     40  * encodings.
     41  *
     42  * Known problems and issues :
     43  * - SPDIF is untested and needs some work still (LED stays off)
     44  * - 32 bit audio playback failed last time i tried but that might an AC'97
     45  *   codec support problem.
     46  * - 32 bit recording works but can't try out playing: see above.
     47  * - no suspend/resume support yet.
     48  * - multiple codecs are `supported' but not tested; the implemetation needs
     49  *   some cleaning up.
     50  */
     51 
     52 #include <sys/cdefs.h>
     53 __KERNEL_RCSID(0, "$NetBSD: auixp.c,v 1.4 2005/01/13 00:48:01 simonb Exp $");
     54 
     55 #include <sys/types.h>
     56 #include <sys/errno.h>
     57 #include <sys/null.h>
     58 #include <sys/param.h>
     59 #include <sys/systm.h>
     60 #include <sys/malloc.h>
     61 #include <sys/device.h>
     62 #include <sys/conf.h>
     63 #include <sys/exec.h>
     64 #include <sys/select.h>
     65 #include <sys/audioio.h>
     66 #include <sys/queue.h>
     67 
     68 #include <machine/bus.h>
     69 #include <machine/intr.h>
     70 
     71 #include <dev/pci/pcidevs.h>
     72 #include <dev/pci/pcivar.h>
     73 
     74 #include <dev/audio_if.h>
     75 #include <dev/mulaw.h>
     76 #include <dev/auconv.h>
     77 #include <dev/ic/ac97var.h>
     78 #include <dev/ic/ac97reg.h>
     79 
     80 #include <dev/pci/auixpreg.h>
     81 #include <dev/pci/auixpvar.h>
     82 
     83 
     84 //#define DEBUG_AUIXP
     85 
     86 
     87 /* why isn't this base address register not in the headerfile? */
     88 #define PCI_CBIO 0x10
     89 
     90 
     91 /* macro's used */
     92 #define KERNADDR(p)	((void *)((p)->addr))
     93 #define	DMAADDR(p)	((p)->map->dm_segs[0].ds_addr)
     94 
     95 
     96 /* the differences might be irrelevant */
     97 enum {
     98 	IXP_200,
     99 	IXP_300,
    100 	IXP_400
    101 };
    102 
    103 
    104 /* our `cards' */
    105 static struct auixp_card_type {
    106 	uint16_t pci_vendor_id;
    107 	uint16_t pci_product_id;
    108 	int type;
    109 } auixp_card_types[] = {
    110 	{ PCI_VENDOR_ATI, PCI_PRODUCT_ATI_IXP_AUDIO_200, IXP_200 },
    111 	{ PCI_VENDOR_ATI, PCI_PRODUCT_ATI_IXP_AUDIO_300, IXP_300 },
    112 	{ PCI_VENDOR_ATI, PCI_PRODUCT_ATI_IXP_AUDIO_400, IXP_400 },
    113 	{ 0, 0, 0 }
    114 };
    115 
    116 
    117 struct audio_device auixp_device = {
    118 	"ATI IXP audio",
    119 	"",
    120 	"auixp"
    121 };
    122 
    123 
    124 /* codec detection constant indicating the interrupt flags */
    125 #define ALL_CODECS_NOT_READY \
    126 	    (ATI_REG_ISR_CODEC0_NOT_READY |\
    127 	     ATI_REG_ISR_CODEC1_NOT_READY |\
    128 	     ATI_REG_ISR_CODEC2_NOT_READY)
    129 #define CODEC_CHECK_BITS (ALL_CODECS_NOT_READY|ATI_REG_ISR_NEW_FRAME)
    130 
    131 
    132 /* autoconfig */
    133 int	auixp_match( struct device *, struct cfdata *, void *);
    134 void	auixp_attach(struct device *, struct device *, void *);
    135 int	auixp_detach(struct device *, int);
    136 
    137 
    138 /* audio(9) function prototypes */
    139 int	auixp_query_encoding(void *, struct audio_encoding *);
    140 int	auixp_set_params(void *, int, int, audio_params_t *, audio_params_t *,
    141 		stream_filter_list_t *, stream_filter_list_t *);
    142 int	auixp_commit_settings(void *);
    143 int	auixp_round_blocksize(void *, int, int, const audio_params_t *);
    144 int	auixp_trigger_output(void *, void *, void *, int, void (*)(void *),
    145 		void *, const audio_params_t *);
    146 int	auixp_trigger_input(void *, void *, void *, int, void (*)(void *),
    147 		void *, const audio_params_t *);
    148 int	auixp_halt_output(void *);
    149 int	auixp_halt_input(void *);
    150 int	auixp_set_port(void *, mixer_ctrl_t *);
    151 int	auixp_get_port(void *, mixer_ctrl_t *);
    152 int	auixp_query_devinfo(void *, mixer_devinfo_t *);
    153 void *	auixp_malloc(void *, int, size_t, struct malloc_type *, int);
    154 void	auixp_free(void *, void *, struct malloc_type *);
    155 int	auixp_getdev(void *, struct audio_device *);
    156 size_t	auixp_round_buffersize(void *, int, size_t);
    157 int	auixp_get_props(void *);
    158 int	auixp_intr(void *);
    159 int	auixp_allocmem(struct auixp_softc *, size_t, size_t,
    160 		struct auixp_dma *);
    161 int	auixp_freemem(struct auixp_softc *, struct auixp_dma *);
    162 paddr_t	auixp_mappage(void *, void *, off_t, int);
    163 
    164 
    165 /* power management (do we support that already?) */
    166 int	auixp_power(struct auixp_softc *, int);
    167 void	auixp_powerhook(int, void *);
    168 int	auixp_suspend(struct auixp_softc *);
    169 int	auixp_resume(struct auixp_softc *);
    170 void	auixp_config(struct auixp_softc *);	/* do we use it? */
    171 
    172 
    173 /* Supporting subroutines */
    174 int	auixp_init(struct auixp_softc *);
    175 void	auixp_autodetect_codecs(struct auixp_softc *);
    176 void	auixp_post_config(struct device *);
    177 
    178 void	auixp_reset_aclink(struct auixp_softc *);
    179 int	auixp_attach_codec(void *, struct ac97_codec_if *);
    180 int	auixp_read_codec(void *, uint8_t, uint16_t *);
    181 int	auixp_write_codec(void *, uint8_t, uint16_t);
    182 int	auixp_wait_for_codecs(struct auixp_softc *, char *);
    183 int	auixp_reset_codec(void *);
    184 enum ac97_host_flags	auixp_flags_codec(void *);
    185 
    186 void	auixp_enable_dma(struct auixp_softc *, struct auixp_dma *);
    187 void	auixp_disable_dma(struct auixp_softc *, struct auixp_dma *);
    188 void	auixp_enable_interrupts(struct auixp_softc *);
    189 void	auixp_disable_interrupts(struct auixp_softc *);
    190 
    191 
    192 /* statics */
    193 void	auixp_link_daisychain(struct auixp_softc *,
    194 		struct auixp_dma *, struct auixp_dma *,
    195 		int, int);
    196 int	auixp_allocate_dma_chain(struct auixp_softc *, struct auixp_dma **);
    197 void	auixp_program_dma_chain(struct auixp_softc *, struct auixp_dma *);
    198 void	auixp_dma_update(struct auixp_softc *, struct auixp_dma *);
    199 void	auixp_update_busbusy(struct auixp_softc *);
    200 
    201 
    202 #ifdef DEBUG_AUIXP
    203 struct auixp_softc *static_sc;
    204 void auixp_dumpreg(void);
    205 #	define DPRINTF(x) printf x;
    206 #else
    207 #	define DPRINTF(x)
    208 #endif
    209 
    210 
    211 const struct audio_hw_if auixp_hw_if = {
    212 	NULL,			/* open */
    213 	NULL,			/* close */
    214 	NULL,			/* drain */
    215 	auixp_query_encoding,
    216 	auixp_set_params,
    217 	auixp_round_blocksize,
    218 	auixp_commit_settings,
    219 	NULL,			/* init_output  */
    220 	NULL,			/* init_input   */
    221 	NULL,			/* start_output */
    222 	NULL,			/* start_input  */
    223 	auixp_halt_output,
    224 	auixp_halt_input,
    225 	NULL,			/* speaker_ctl */
    226 	auixp_getdev,
    227 	NULL,			/* getfd */
    228 	auixp_set_port,
    229 	auixp_get_port,
    230 	auixp_query_devinfo,
    231 	auixp_malloc,
    232 	auixp_free,
    233 	auixp_round_buffersize,
    234 	auixp_mappage,
    235 	auixp_get_props,
    236 	auixp_trigger_output,
    237 	auixp_trigger_input
    238 };
    239 
    240 
    241 CFATTACH_DECL(auixp, sizeof(struct auixp_softc), auixp_match, auixp_attach,
    242     auixp_detach, NULL);
    243 
    244 
    245 /*
    246  * audio(9) functions
    247  */
    248 
    249 int
    250 auixp_query_encoding(void *hdl, struct audio_encoding *ae)
    251 {
    252 	struct auixp_codec *co;
    253 	struct auixp_softc *sc;
    254 
    255 	co = (struct auixp_codec *) hdl;
    256 	sc = co->sc;
    257 	return auconv_query_encoding(sc->sc_encodings, ae);
    258 }
    259 
    260 
    261 static int
    262 auixp_set_rate(struct auixp_codec *co, int mode, u_int srate)
    263 {
    264 	int ret;
    265 	u_int ratetmp;
    266 
    267 	ratetmp = srate;
    268 	if (mode == AUMODE_RECORD) {
    269 		ret = co->codec_if->vtbl->set_rate(co->codec_if,
    270 			AC97_REG_PCM_LR_ADC_RATE, &ratetmp);
    271 		return ret;
    272 	}
    273 
    274 	/* play mode */
    275 	ret = co->codec_if->vtbl->set_rate(co->codec_if,
    276 		AC97_REG_PCM_FRONT_DAC_RATE, &ratetmp);
    277 	if (ret)
    278 		return ret;
    279 
    280 	ratetmp = srate;
    281 	ret = co->codec_if->vtbl->set_rate(co->codec_if,
    282 		AC97_REG_PCM_SURR_DAC_RATE, &ratetmp);
    283 	if (ret)
    284 		return ret;
    285 
    286 	ratetmp = srate;
    287 	ret = co->codec_if->vtbl->set_rate(co->codec_if,
    288 		AC97_REG_PCM_LFE_DAC_RATE, &ratetmp);
    289 	return ret;
    290 }
    291 
    292 
    293 /* commit setting and program ATI IXP chip */
    294 int
    295 auixp_commit_settings(void *hdl)
    296 {
    297 	struct auixp_codec *co;
    298 	struct auixp_softc *sc;
    299 	bus_space_tag_t    iot;
    300 	bus_space_handle_t ioh;
    301 	struct audio_params *params;
    302 	uint32_t value;
    303 
    304 	/* XXX would it be better to stop interrupts first? XXX */
    305 	co = (struct auixp_codec *) hdl;
    306 	sc = co->sc;
    307 	iot = sc->sc_iot;
    308 	ioh = sc->sc_ioh;
    309 
    310 	/* process input settings */
    311 	params = &sc->sc_play_params;
    312 
    313 	/* set input interleaving (precision) */
    314 	value  =  bus_space_read_4(iot, ioh, ATI_REG_CMD);
    315 	value &= ~ATI_REG_CMD_INTERLEAVE_IN;
    316 	if (params->precision <= 16)
    317 		value |= ATI_REG_CMD_INTERLEAVE_IN;
    318 	bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
    319 
    320 	/* process output settings */
    321 	params = &sc->sc_play_params;
    322 
    323 	value  =  bus_space_read_4(iot, ioh, ATI_REG_OUT_DMA_SLOT);
    324 	value &= ~ATI_REG_OUT_DMA_SLOT_MASK;
    325 
    326 	switch (params->channels) {
    327 	case 6:
    328 		value |= ATI_REG_OUT_DMA_SLOT_BIT(7) |
    329 			 ATI_REG_OUT_DMA_SLOT_BIT(8);
    330 		/* fallthru */
    331 	case 4:
    332 		value |= ATI_REG_OUT_DMA_SLOT_BIT(6) |
    333 			 ATI_REG_OUT_DMA_SLOT_BIT(9);
    334 		/* fallthru */
    335 	default:
    336 		value |= ATI_REG_OUT_DMA_SLOT_BIT(3) |
    337 			 ATI_REG_OUT_DMA_SLOT_BIT(4);
    338 		break;
    339 	}
    340 	/* set output threshold */
    341 	value |= 0x04 << ATI_REG_OUT_DMA_THRESHOLD_SHIFT;
    342 	bus_space_write_4(iot, ioh, ATI_REG_OUT_DMA_SLOT, value);
    343 
    344 	/* set output interleaving (precision) */
    345 	value  =  bus_space_read_4(iot, ioh, ATI_REG_CMD);
    346 	value &= ~ATI_REG_CMD_INTERLEAVE_OUT;
    347 	if (params->precision <= 16)
    348 		value |= ATI_REG_CMD_INTERLEAVE_OUT;
    349 	bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
    350 
    351 	/* enable 6 channel reordering */
    352 	value  =  bus_space_read_4(iot, ioh, ATI_REG_6CH_REORDER);
    353 	value &= ~ATI_REG_6CH_REORDER_EN;
    354 	if (params->channels == 6)
    355 		value |= ATI_REG_6CH_REORDER_EN;
    356 	bus_space_write_4(iot, ioh, ATI_REG_6CH_REORDER, value);
    357 
    358 	if (sc->has_spdif) {
    359 		/* set SPDIF (if present) */
    360 		value  =  bus_space_read_4(iot, ioh, ATI_REG_CMD);
    361 		value &= ~ATI_REG_CMD_SPDF_CONFIG_MASK;
    362 		value |=  ATI_REG_CMD_SPDF_CONFIG_34; /* NetBSD AC'97 default */
    363 
    364 		/* XXX this prolly is not nessisary unless splitted XXX */
    365 		value &= ~ATI_REG_CMD_INTERLEAVE_SPDF;
    366 		if (params->precision <= 16)
    367 			value |= ATI_REG_CMD_INTERLEAVE_SPDF;
    368 		bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
    369 	}
    370 
    371 	return 0;
    372 }
    373 
    374 
    375 /* set audio properties in desired setting */
    376 int
    377 auixp_set_params(void *hdl, int setmode, int usemode, audio_params_t *play,
    378 		 audio_params_t *rec, stream_filter_list_t *pfil,
    379 		 stream_filter_list_t *rfil)
    380 {
    381 	struct auixp_codec *co;
    382 	struct auixp_softc *sc;
    383 	audio_params_t *params;
    384 	stream_filter_list_t *fil;
    385 	int mode, index;
    386 
    387 	/*
    388 	 * In current NetBSD AC'97 implementation, SPDF is linked to channel 3
    389 	 * and 4 i.e. stereo output.
    390 	 */
    391 
    392 	co = (struct auixp_codec *) hdl;
    393 	sc = co->sc;
    394 	for (mode = AUMODE_RECORD; mode != -1;
    395 	     mode = (mode == AUMODE_RECORD) ? AUMODE_PLAY : -1) {
    396 		if ((setmode & mode) == 0)
    397 			continue;
    398 
    399 		params = (mode == AUMODE_PLAY) ? play :  rec;
    400 		fil    = (mode == AUMODE_PLAY) ? pfil : rfil;
    401 		if (params == NULL)
    402 			continue;
    403 
    404 		/* AD1888 settings ... don't know the IXP limits */
    405 		if (params->sample_rate < AUIXP_MINRATE)
    406 			return EINVAL;
    407 		if (params->sample_rate > AUIXP_MAXRATE)
    408 			return EINVAL;
    409 
    410 		index = auconv_set_converter(sc->sc_formats, AUIXP_NFORMATS,
    411 					     mode, params, TRUE, fil);
    412 
    413 		/* nothing found? */
    414 		if (index < 0)
    415 			return EINVAL;
    416 
    417 		/* not sure yet as to why i have to change params here */
    418 		if (fil->req_size > 0)
    419 			params = &fil->filters[0].param;
    420 
    421 		/* if variable speed and we can't set the desired rate, fail */
    422 		if ((sc->sc_formats[index].frequency_type != 1) &&
    423 		    auixp_set_rate(co, mode, params->sample_rate))
    424 			return EINVAL;
    425 
    426 		/* preserve the settings */
    427 		if (mode == AUMODE_PLAY)
    428 			sc->sc_play_params = *params;
    429 		if (mode == AUMODE_RECORD)
    430 			sc->sc_rec_params  = *params;
    431 	}
    432 
    433 	return 0;
    434 }
    435 
    436 
    437 /* called to translate a requested blocksize to a hw-possible one */
    438 int
    439 auixp_round_blocksize(void *hdl, int bs, int mode, const audio_params_t *param)
    440 {
    441 	uint32_t new_bs;
    442 
    443 	new_bs = bs;
    444 	/* Be conservative; align to 32 bytes and maximise it to 64 kb */
    445 	/* 256 kb possible */
    446 	if (new_bs > 0x10000)
    447 		bs = 0x10000;			/* 64 kb max */
    448 	new_bs = (bs & ~0x20);			/* 32 bytes align */
    449 
    450 	return new_bs;
    451 }
    452 
    453 
    454 /*
    455  * allocate dma capable memory and record its information for later retrieval
    456  * when we program the dma chain itself. The trigger routines passes on the
    457  * kernel virtual address we return here as a reference to the mapping.
    458  */
    459 void *
    460 auixp_malloc(void *hdl, int direction, size_t size,
    461 	     struct malloc_type *type, int flags)
    462 {
    463 	struct auixp_codec *co;
    464 	struct auixp_softc *sc;
    465 	struct auixp_dma *dma;
    466 	int error;
    467 
    468 	co = (struct auixp_codec *) hdl;
    469 	sc = co->sc;
    470 	/* get us a auixp_dma structure */
    471 	dma = malloc(sizeof(*dma), type, flags);
    472 	if (!dma)
    473 		return NULL;
    474 
    475 	/* get us a dma buffer itself */
    476 	error = auixp_allocmem(sc, size, 16, dma);
    477 	if (error) {
    478 		free(dma, type);
    479 		printf("%s: auixp_malloc: not enough memory\n",
    480 		    sc->sc_dev.dv_xname);
    481 
    482 		return NULL;
    483 	}
    484 	SLIST_INSERT_HEAD(&sc->sc_dma_list, dma, dma_chain);
    485 
    486 	DPRINTF(("auixp_malloc: returning kern %p,   hw 0x%08x for %d bytes "
    487 	    "in %d segs\n", KERNADDR(dma), (uint32_t) DMAADDR(dma), dma->size,
    488 	    dma->nsegs)
    489 	);
    490 
    491 	return KERNADDR(dma);
    492 }
    493 
    494 
    495 /*
    496  * free and release dma capable memory we allocated before and remove its
    497  * recording
    498  */
    499 void
    500 auixp_free(void *hdl, void *addr, struct malloc_type *type)
    501 {
    502 	struct auixp_codec *co;
    503 	struct auixp_softc *sc;
    504 	struct auixp_dma *dma;
    505 
    506 	co = (struct auixp_codec *) hdl;
    507 	sc = co->sc;
    508 	SLIST_FOREACH(dma, &sc->sc_dma_list, dma_chain) {
    509 		if (KERNADDR(dma) == addr) {
    510 			SLIST_REMOVE(&sc->sc_dma_list, dma, auixp_dma,
    511 			    dma_chain);
    512 			free(dma, type);
    513 			return;
    514 		}
    515 	}
    516 }
    517 
    518 
    519 int
    520 auixp_getdev(void *hdl, struct audio_device *ret)
    521 {
    522 
    523 	*ret = auixp_device;
    524 	return 0;
    525 }
    526 
    527 
    528 /* pass request to AC'97 codec code */
    529 int
    530 auixp_set_port(void *hdl, mixer_ctrl_t *mc)
    531 {
    532 	struct auixp_codec *co;
    533 
    534 	co = (struct auixp_codec *) hdl;
    535 	return co->codec_if->vtbl->mixer_set_port(co->codec_if, mc);
    536 }
    537 
    538 
    539 /* pass request to AC'97 codec code */
    540 int
    541 auixp_get_port(void *hdl, mixer_ctrl_t *mc)
    542 {
    543 	struct auixp_codec *co;
    544 
    545 	co = (struct auixp_codec *) hdl;
    546 	return co->codec_if->vtbl->mixer_get_port(co->codec_if, mc);
    547 }
    548 
    549 /* pass request to AC'97 codec code */
    550 int
    551 auixp_query_devinfo(void *hdl, mixer_devinfo_t *di)
    552 {
    553 	struct auixp_codec *co;
    554 
    555 	co = (struct auixp_codec *) hdl;
    556 	return co->codec_if->vtbl->query_devinfo(co->codec_if, di);
    557 }
    558 
    559 
    560 size_t
    561 auixp_round_buffersize(void *hdl, int direction, size_t bufsize)
    562 {
    563 
    564 	/* XXX force maximum? i.e. 256 kb? */
    565 	return bufsize;
    566 }
    567 
    568 
    569 int
    570 auixp_get_props(void *hdl)
    571 {
    572 
    573 	return AUDIO_PROP_MMAP | AUDIO_PROP_INDEPENDENT | AUDIO_PROP_FULLDUPLEX;
    574 }
    575 
    576 
    577 /*
    578  * A dma descriptor has dma->nsegs segments defined in dma->segs set up when
    579  * we claimed the memory.
    580  *
    581  * Due to our demand for one contiguous DMA area, we only have one segment. A
    582  * c_dma structure is about 3 kb for the 256 entries we maximally program
    583  * -arbitrary limit AFAIK- so all is most likely to be in one segment/page
    584  * anyway.
    585  *
    586  * XXX ought to implement fragmented dma area XXX
    587  *
    588  * Note that _v variables depict kernel virtual addresses, _p variables depict
    589  * physical addresses.
    590  */
    591 void
    592 auixp_link_daisychain(struct auixp_softc *sc,
    593 		struct auixp_dma *c_dma, struct auixp_dma *s_dma,
    594 		int blksize, int blocks)
    595 {
    596 	atiixp_dma_desc_t *caddr_v, *next_caddr_v;
    597 	uint32_t caddr_p, next_caddr_p, saddr_p;
    598 	int i;
    599 
    600 	/* just make sure we are not changing when its running */
    601 	auixp_disable_dma(sc, c_dma);
    602 
    603 	/* setup dma chain start addresses */
    604 	caddr_v = KERNADDR(c_dma);
    605 	caddr_p = DMAADDR(c_dma);
    606 	saddr_p = DMAADDR(s_dma);
    607 
    608 	/* program the requested number of blocks */
    609 	for (i = 0; i < blocks; i++) {
    610 		/* clear the block just in case */
    611 		bzero(caddr_v, sizeof(atiixp_dma_desc_t));
    612 
    613 		/* round robin the chain dma addresses for its successor */
    614 		next_caddr_v = caddr_v + 1;
    615 		next_caddr_p = caddr_p + sizeof(atiixp_dma_desc_t);
    616 
    617 		if (i == blocks-1) {
    618 			next_caddr_v = KERNADDR(c_dma);
    619 			next_caddr_p = DMAADDR(c_dma);
    620 		}
    621 
    622 		/* fill in the hardware dma chain descriptor in little-endian */
    623 		caddr_v->addr   = htole32(saddr_p);
    624 		caddr_v->status = htole16(0);
    625 		caddr_v->size   = htole16((blksize >> 2)); /* in dwords (!!!) */
    626 		caddr_v->next   = htole32(next_caddr_p);
    627 
    628 		/* advance slot */
    629 		saddr_p += blksize;	/* XXX assuming contiguous XXX */
    630 		caddr_v  = next_caddr_v;
    631 		caddr_p  = next_caddr_p;
    632 	}
    633 }
    634 
    635 
    636 int
    637 auixp_allocate_dma_chain(struct auixp_softc *sc, struct auixp_dma **dmap)
    638 {
    639 	struct auixp_dma *dma;
    640 	int error;
    641 
    642 	/* allocate keeper of dma area */
    643 	*dmap = NULL;
    644 	dma = malloc(sizeof(struct auixp_dma), M_DEVBUF, M_NOWAIT | M_ZERO);
    645 	if (!dma)
    646 		return ENOMEM;
    647 
    648 	/* allocate for daisychain of IXP hardware-dma descriptors */
    649 	error = auixp_allocmem(sc, DMA_DESC_CHAIN * sizeof(atiixp_dma_desc_t),
    650 	    16, dma);
    651 	if (error) {
    652 		printf("%s: can't malloc dma descriptor chain\n",
    653 		    sc->sc_dev.dv_xname);
    654 		return ENOMEM;
    655 	}
    656 
    657 	/* return info and initialise structure */
    658 	dma->intr    = NULL;
    659 	dma->intrarg = NULL;
    660 
    661 	*dmap = dma;
    662 	return 0;
    663 }
    664 
    665 
    666 /* program dma chain in it's link address descriptor */
    667 void
    668 auixp_program_dma_chain(struct auixp_softc *sc, struct auixp_dma *dma)
    669 {
    670 	bus_space_tag_t    iot;
    671 	bus_space_handle_t ioh;
    672 	uint32_t value;
    673 
    674 	iot = sc->sc_iot;
    675 	ioh = sc->sc_ioh;
    676 	/* get hardware start address of DMA chain and set valid-flag in it */
    677 	/* XXX allways at start? XXX */
    678 	value = DMAADDR(dma);
    679 	value = value | ATI_REG_LINKPTR_EN;
    680 
    681 	/* reset linkpointer */
    682 	bus_space_write_4(iot, ioh, dma->linkptr, 0);
    683 
    684 	/* reset this DMA engine */
    685 	auixp_disable_dma(sc, dma);
    686 	auixp_enable_dma(sc, dma);
    687 
    688 	/* program new DMA linkpointer */
    689 	bus_space_write_4(iot, ioh, dma->linkptr, value);
    690 }
    691 
    692 
    693 /* called from interrupt code to signal end of one dma-slot */
    694 void
    695 auixp_dma_update(struct auixp_softc *sc, struct auixp_dma *dma)
    696 {
    697 
    698 	/* be very paranoid */
    699 	if (!dma)
    700 		panic("auixp: update: dma = NULL");
    701 	if (!dma->intr)
    702 		panic("auixp: update: dma->intr = NULL");
    703 
    704 	/* request more input from upper layer */
    705 	(*dma->intr)(dma->intrarg);
    706 }
    707 
    708 
    709 /*
    710  * The magic `busbusy' bit that needs to be set when dma is active; allowing
    711  * busmastering?
    712  */
    713 void
    714 auixp_update_busbusy(struct auixp_softc *sc)
    715 {
    716 	bus_space_tag_t    iot;
    717 	bus_space_handle_t ioh;
    718 	uint32_t value;
    719 	int running;
    720 
    721 	iot = sc->sc_iot;
    722 	ioh = sc->sc_ioh;
    723 	/* set bus-busy flag when either recording or playing is performed */
    724 	value  = bus_space_read_4(iot, ioh, ATI_REG_IER);
    725 	value &= ~ATI_REG_IER_SET_BUS_BUSY;
    726 
    727 	running = ((sc->sc_output_dma->running) || (sc->sc_input_dma->running));
    728 	if (running)
    729 		value |= ATI_REG_IER_SET_BUS_BUSY;
    730 
    731 	bus_space_write_4(iot, ioh, ATI_REG_IER, value);
    732 
    733 }
    734 
    735 
    736 /*
    737  * Called from upper audio layer to request playing audio, only called once;
    738  * audio is refilled by calling the intr() function when space is available
    739  * again.
    740  */
    741 /* XXX allmost literaly a copy of trigger-input; could be factorised XXX */
    742 int
    743 auixp_trigger_output(void *hdl, void *start, void *end, int blksize,
    744 		void (*intr)(void *), void *intrarg, const audio_params_t *param)
    745 {
    746 	struct auixp_codec *co;
    747 	struct auixp_softc *sc;
    748 	struct auixp_dma   *chain_dma;
    749 	struct auixp_dma   *sound_dma;
    750 	uint32_t blocks;
    751 
    752 	co = (struct auixp_codec *) hdl;
    753 	sc = co->sc;
    754 	chain_dma = sc->sc_output_dma;
    755 	/* add functions to call back */
    756 	chain_dma->intr    = intr;
    757 	chain_dma->intrarg = intrarg;
    758 
    759 	/*
    760 	 * Program output DMA chain with blocks from [start...end] with
    761 	 * blksize fragments.
    762 	 *
    763 	 * NOTE, we can assume its in one block since we asked for it to be in
    764 	 * one contiguous blob; XXX change this? XXX
    765 	 */
    766 	blocks = (size_t) (((caddr_t) end) - ((caddr_t) start)) / blksize;
    767 
    768 	/* lookup `start' address in our list of DMA area's */
    769 	SLIST_FOREACH(sound_dma, &sc->sc_dma_list, dma_chain) {
    770 		if (KERNADDR(sound_dma) == start)
    771 			break;
    772 	}
    773 
    774 	/* not ours ? then bail out */
    775 	if (!sound_dma) {
    776 		printf("auixp_trigger_output: bad sound addr %p\n", start);
    777 		return EINVAL;
    778 	}
    779 
    780 	/* link round-robin daisychain and program hardware */
    781 	auixp_link_daisychain(sc, chain_dma, sound_dma, blksize, blocks);
    782 	auixp_program_dma_chain(sc, chain_dma);
    783 
    784 	/* mark we are now able to run now */
    785 	chain_dma->running = 1;
    786 
    787 	/* update bus-flags; XXX programs more flags XXX */
    788 	auixp_update_busbusy(sc);
    789 
    790 	/* callbacks happen in interrupt routine */
    791 	return 0;
    792 }
    793 
    794 
    795 /* halt output of audio, just disable it's dma and update bus state */
    796 int
    797 auixp_halt_output(void *hdl)
    798 {
    799 	struct auixp_codec *co;
    800 	struct auixp_softc *sc;
    801 	struct auixp_dma   *dma;
    802 
    803 	co  = (struct auixp_codec *) hdl;
    804 	sc  = co->sc;
    805 	dma = sc->sc_output_dma;
    806 	auixp_disable_dma(sc, dma);
    807 
    808 	dma->running = 0;
    809 	auixp_update_busbusy(sc);
    810 
    811 	return 0;
    812 }
    813 
    814 
    815 /* XXX allmost literaly a copy of trigger-output; could be factorised XXX */
    816 int
    817 auixp_trigger_input(void *hdl, void *start, void *end, int blksize,
    818 		void (*intr)(void *), void *intrarg, const audio_params_t *param)
    819 {
    820 	struct auixp_codec *co;
    821 	struct auixp_softc *sc;
    822 	struct auixp_dma   *chain_dma;
    823 	struct auixp_dma   *sound_dma;
    824 	uint32_t blocks;
    825 
    826 	co = (struct auixp_codec *) hdl;
    827 	sc = co->sc;
    828 	chain_dma = sc->sc_input_dma;
    829 	/* add functions to call back */
    830 	chain_dma->intr    = intr;
    831 	chain_dma->intrarg = intrarg;
    832 
    833 	/*
    834 	 * Program output DMA chain with blocks from [start...end] with
    835 	 * blksize fragments.
    836 	 *
    837 	 * NOTE, we can assume its in one block since we asked for it to be in
    838 	 * one contiguous blob; XXX change this? XXX
    839 	 */
    840 	blocks = (size_t) (((caddr_t) end) - ((caddr_t) start)) / blksize;
    841 
    842 	/* lookup `start' address in our list of DMA area's */
    843 	SLIST_FOREACH(sound_dma, &sc->sc_dma_list, dma_chain) {
    844 		if (KERNADDR(sound_dma) == start)
    845 			break;
    846 	}
    847 
    848 	/* not ours ? then bail out */
    849 	if (!sound_dma) {
    850 		printf("auixp_trigger_input: bad sound addr %p\n", start);
    851 		return EINVAL;
    852 	}
    853 
    854 	/* link round-robin daisychain and program hardware */
    855 	auixp_link_daisychain(sc, chain_dma, sound_dma, blksize, blocks);
    856 	auixp_program_dma_chain(sc, chain_dma);
    857 
    858 	/* mark we are now able to run now */
    859 	chain_dma->running = 1;
    860 
    861 	/* update bus-flags; XXX programs more flags XXX */
    862 	auixp_update_busbusy(sc);
    863 
    864 	/* callbacks happen in interrupt routine */
    865 	return 0;
    866 }
    867 
    868 
    869 /* halt sampling audio, just disable it's dma and update bus state */
    870 int
    871 auixp_halt_input(void *hdl)
    872 {
    873 	struct auixp_codec *co;
    874 	struct auixp_softc *sc;
    875 	struct auixp_dma   *dma;
    876 
    877 	co = (struct auixp_codec *) hdl;
    878 	sc = co->sc;
    879 	dma = sc->sc_output_dma;
    880 	auixp_disable_dma(sc, dma);
    881 
    882 	dma->running = 0;
    883 	auixp_update_busbusy(sc);
    884 
    885 	return 0;
    886 }
    887 
    888 
    889 /*
    890  * IXP audio interrupt handler
    891  *
    892  * note that we return the number of bits handled; the return value is not
    893  * documentated but i saw it implemented in other drivers. Prolly returning a
    894  * value > 0 means "i've dealt with it"
    895  *
    896  */
    897 int
    898 auixp_intr(void *softc)
    899 {
    900 	struct auixp_softc *sc;
    901 	bus_space_tag_t    iot;
    902 	bus_space_handle_t ioh;
    903 	uint32_t status, enable, detected_codecs;
    904 	int ret;
    905 
    906 	sc = softc;
    907 	iot = sc->sc_iot;
    908 	ioh = sc->sc_ioh;
    909 	ret = 0;
    910 	/* get status from the interrupt status register */
    911 	status = bus_space_read_4(iot, ioh, ATI_REG_ISR);
    912 
    913 	/* nothing set?? but why do you call then??? */
    914 	if (status == 0) {
    915 		printf("%s: spurious hardware interrupt? status = 0\n",
    916 		    sc->sc_dev.dv_xname);
    917 		return 1;	/* be safe */
    918 	}
    919 
    920 	DPRINTF(("auixp: (status = %x)\n", status));
    921 
    922 	/* check DMA UPDATE flags for input & output */
    923 	if (status & ATI_REG_ISR_IN_STATUS) {
    924 		ret++; DPRINTF(("IN_STATUS\n"));
    925 		auixp_dma_update(sc, sc->sc_input_dma);
    926 	}
    927 	if (status & ATI_REG_ISR_OUT_STATUS) {
    928 		ret++; DPRINTF(("OUT_STATUS\n"));
    929 		auixp_dma_update(sc, sc->sc_output_dma);
    930 	}
    931 
    932 	/* XXX XRUN flags not used/needed yet; should i implement it? XXX */
    933 	/* acknowledge the interrupts nevertheless */
    934 	if (status & ATI_REG_ISR_IN_XRUN) {
    935 		ret++; DPRINTF(("IN_XRUN\n"));
    936 		/* auixp_dma_xrun(sc, sc->sc_input_dma);  */
    937 	}
    938 	if (status & ATI_REG_ISR_OUT_XRUN) {
    939 		ret++; DPRINTF(("OUT_XRUN\n"));
    940 		/* auixp_dma_xrun(sc, sc->sc_output_dma); */
    941 	}
    942 
    943 	/* check if we are looking for codec detection */
    944 	if (status & CODEC_CHECK_BITS) {
    945 		ret++;
    946 		/* mark missing codecs as not ready */
    947 		detected_codecs = status & CODEC_CHECK_BITS;
    948 		sc->sc_codec_not_ready_bits |= detected_codecs;
    949 
    950 		/* disable detected interupt sources */
    951 		enable  = bus_space_read_4(iot, ioh, ATI_REG_IER);
    952 		enable &= ~detected_codecs;
    953 		bus_space_write_4(iot, ioh, ATI_REG_IER, enable);
    954 	}
    955 
    956 	/* acknowledge interrupt sources */
    957 	bus_space_write_4(iot, ioh, ATI_REG_ISR, status);
    958 
    959 	return ret;
    960 }
    961 
    962 
    963 /* allocate memory for dma purposes; on failure of any of the steps, roll back */
    964 int
    965 auixp_allocmem(struct auixp_softc *sc, size_t size,
    966 	       size_t align, struct auixp_dma *dma)
    967 {
    968 	int error;
    969 
    970 	/* remember size */
    971 	dma->size = size;
    972 
    973 	/* allocate DMA safe memory but in just one segment for now :( */
    974 	error = bus_dmamem_alloc(sc->sc_dmat, dma->size, align, 0,
    975 	    dma->segs, sizeof(dma->segs) / sizeof(dma->segs[0]), &dma->nsegs,
    976 	    BUS_DMA_NOWAIT);
    977 	if (error)
    978 		return error;
    979 
    980 	/*
    981 	 * map allocated memory into kernel virtual address space and keep it
    982 	 * coherent with the CPU.
    983 	 */
    984 	error = bus_dmamem_map(sc->sc_dmat, dma->segs, dma->nsegs, dma->size,
    985 				&dma->addr, BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
    986 	if (error)
    987 		goto free;
    988 
    989 	/* allocate associated dma handle and initialize it. */
    990 	error = bus_dmamap_create(sc->sc_dmat, dma->size, 1, dma->size, 0,
    991 				  BUS_DMA_NOWAIT, &dma->map);
    992 	if (error)
    993 		goto unmap;
    994 
    995 	/*
    996 	 * load the dma handle with mappings for a dma transfer; all pages
    997 	 * need to be wired.
    998 	 */
    999 	error = bus_dmamap_load(sc->sc_dmat, dma->map, dma->addr, dma->size, NULL,
   1000 				BUS_DMA_NOWAIT);
   1001 	if (error)
   1002 		goto destroy;
   1003 
   1004 	return 0;
   1005 
   1006 destroy:
   1007 	bus_dmamap_destroy(sc->sc_dmat, dma->map);
   1008 unmap:
   1009 	bus_dmamem_unmap(sc->sc_dmat, dma->addr, dma->size);
   1010 free:
   1011 	bus_dmamem_free(sc->sc_dmat, dma->segs, dma->nsegs);
   1012 
   1013 	return error;
   1014 }
   1015 
   1016 
   1017 /* undo dma mapping and release memory allocated */
   1018 int
   1019 auixp_freemem(struct auixp_softc *sc, struct auixp_dma *p)
   1020 {
   1021 
   1022 	bus_dmamap_unload(sc->sc_dmat, p->map);
   1023 	bus_dmamap_destroy(sc->sc_dmat, p->map);
   1024 	bus_dmamem_unmap(sc->sc_dmat, p->addr, p->size);
   1025 	bus_dmamem_free(sc->sc_dmat, p->segs, p->nsegs);
   1026 
   1027 	return 0;
   1028 }
   1029 
   1030 
   1031 /* memory map dma memory */
   1032 paddr_t
   1033 auixp_mappage(void *hdl, void *mem, off_t off, int prot)
   1034 {
   1035 	struct auixp_codec *co;
   1036 	struct auixp_softc *sc;
   1037 	struct auixp_dma *p;
   1038 
   1039 	co = (struct auixp_codec *) hdl;
   1040 	sc  = co->sc;
   1041 	/* for sanity */
   1042 	if (off < 0)
   1043 		return -1;
   1044 
   1045 	/* look up allocated DMA area */
   1046 	SLIST_FOREACH(p, &sc->sc_dma_list, dma_chain) {
   1047 		if (KERNADDR(p) == mem)
   1048 			break;
   1049 	}
   1050 
   1051 	/* have we found it ? */
   1052 	if (!p)
   1053 		return -1;
   1054 
   1055 	/* return mmap'd region */
   1056 	return bus_dmamem_mmap(sc->sc_dmat, p->segs, p->nsegs,
   1057 			       off, prot, BUS_DMA_WAITOK);
   1058 }
   1059 
   1060 
   1061 /*
   1062  * Attachment section
   1063  */
   1064 
   1065 /* Is it my hardware? */
   1066 int
   1067 auixp_match(struct device *dev, struct cfdata *match, void *aux)
   1068 {
   1069 	struct pci_attach_args *pa;
   1070 
   1071 	pa = (struct pci_attach_args *)aux;
   1072 	switch(PCI_VENDOR(pa->pa_id)) {
   1073 	case PCI_VENDOR_ATI:
   1074 		switch(PCI_PRODUCT(pa->pa_id)) {
   1075 		case PCI_PRODUCT_ATI_IXP_AUDIO_200:
   1076 		case PCI_PRODUCT_ATI_IXP_AUDIO_300:
   1077 		case PCI_PRODUCT_ATI_IXP_AUDIO_400:
   1078 			return 1;
   1079 		}
   1080 	}
   1081 
   1082 	return 0;
   1083 }
   1084 
   1085 
   1086 /* it is... now hook up and set up the resources we need */
   1087 void
   1088 auixp_attach(struct device *parent, struct device *self, void *aux)
   1089 {
   1090 	struct auixp_softc *sc;
   1091 	struct pci_attach_args *pa;
   1092 	pcitag_t tag;
   1093 	pci_chipset_tag_t pc;
   1094 	pci_intr_handle_t ih;
   1095 	struct auixp_card_type *card;
   1096 	const char *intrstr;
   1097 	uint32_t data;
   1098 	char devinfo[256];
   1099 	int revision, len;
   1100 
   1101 	sc = (struct auixp_softc *)self;
   1102 	pa = (struct pci_attach_args *)aux;
   1103 	tag = pa->pa_tag;
   1104 	pc = pa->pa_pc;
   1105 #ifdef DEBUG_AUIXP
   1106 	static_sc = sc;
   1107 #endif
   1108 
   1109 	/* print information confirming attachment */
   1110 	aprint_naive(": Audio controller\n");
   1111 
   1112 	pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo));
   1113 	revision = PCI_REVISION(pa->pa_class);
   1114 	aprint_normal(": %s (rev. 0x%02x)\n", devinfo, revision);
   1115 
   1116 	/* set up details from our set of known `cards'/chips */
   1117 	for (card = auixp_card_types; card->pci_vendor_id; card++)
   1118 		if (PCI_VENDOR(pa->pa_id) == card->pci_vendor_id &&
   1119 		    PCI_PRODUCT(pa->pa_id) == card->pci_product_id) {
   1120 			sc->type = card->type;
   1121 			break;
   1122 		}
   1123 
   1124 	/* device only has 32 bit non prefetchable memory		*/
   1125 	/* set MEM space access and enable the card's busmastering	*/
   1126 	data = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
   1127 	data |= (PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE);
   1128 	pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, data);
   1129 
   1130 	/* map memory; its not sized -> what is the size? max PCI slot size? */
   1131 	if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_MEM, 0,
   1132 	    &sc->sc_iot, &sc->sc_ioh, &sc->sc_iob, &sc->sc_ios)) {
   1133 		aprint_error("%s: can't map memory space\n",
   1134 		    sc->sc_dev.dv_xname);
   1135 		return;
   1136 	}
   1137 
   1138 	/* Initialize softc */
   1139 	sc->sc_tag = tag;
   1140 	sc->sc_pct = pc;
   1141 	sc->sc_dmat = pa->pa_dmat;
   1142 	SLIST_INIT(&sc->sc_dma_list);
   1143 
   1144 	/* get us the auixp_dma structures */
   1145 	auixp_allocate_dma_chain(sc, &sc->sc_output_dma);
   1146 	auixp_allocate_dma_chain(sc, &sc->sc_input_dma);
   1147 
   1148 	/* when that fails we are dead in the water */
   1149 	if (!sc->sc_output_dma || !sc->sc_input_dma)
   1150 		return;
   1151 
   1152 	/* fill in the missing details about the dma channels. */
   1153 
   1154 	/* for output */
   1155 	sc->sc_output_dma->linkptr        = ATI_REG_OUT_DMA_LINKPTR;
   1156 	sc->sc_output_dma->dma_enable_bit = ATI_REG_CMD_OUT_DMA_EN |
   1157 					    ATI_REG_CMD_SEND_EN;
   1158 	/* have spdif? then this too! XXX not seeing LED yet! XXX */
   1159 	if (sc->has_spdif)
   1160 		sc->sc_output_dma->dma_enable_bit |= ATI_REG_CMD_SPDF_OUT_EN;
   1161 
   1162 	/* and for input */
   1163 	sc->sc_input_dma->linkptr         = ATI_REG_IN_DMA_LINKPTR;
   1164 	sc->sc_input_dma->dma_enable_bit  = ATI_REG_CMD_IN_DMA_EN  |
   1165 					    ATI_REG_CMD_RECEIVE_EN;
   1166 
   1167 #if 0
   1168 	/* could preliminary program DMA chain */
   1169 	auixp_program_dma_chain(sc, sc->sc_output_dma);
   1170 	auixp_program_dma_chain(sc, sc->sc_input_dma);
   1171 #endif
   1172 
   1173 	/* map interrupt on the pci bus */
   1174 	if (pci_intr_map(pa, &ih)) {
   1175 		aprint_error("%s: can't map interrupt\n", sc->sc_dev.dv_xname);
   1176 		return;
   1177 	}
   1178 
   1179 	/* where are we connected at ? */
   1180 	intrstr = pci_intr_string(pc, ih);
   1181 
   1182 	/* establish interrupt routine hookup at IPL_AUDIO level */
   1183 	sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, auixp_intr, self);
   1184 	if (sc->sc_ih == NULL) {
   1185 		aprint_error("%s: can't establish interrupt",
   1186 		    sc->sc_dev.dv_xname);
   1187 		if (intrstr != NULL)
   1188 			aprint_normal(" at %s", intrstr);
   1189 		aprint_normal("\n");
   1190 		return;
   1191 	}
   1192 	aprint_normal("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr);
   1193 
   1194 	/* power up chip */
   1195 	auixp_power(sc, PCI_PMCSR_STATE_D0);
   1196 
   1197 	/* init chip */
   1198 	if (auixp_init(sc) == -1) {
   1199 		aprint_error("%s: auixp_attach: unable to initialize the card\n",
   1200 		    sc->sc_dev.dv_xname);
   1201 		return;
   1202 	}
   1203 
   1204 	/* XXX set up power hooks; not implemented yet XXX */
   1205 
   1206 	len = 1;	/* shut up gcc */
   1207 #ifdef notyet
   1208 	/* create suspend save area */
   1209 	len = sizeof(uint16_t) * (ESA_REV_B_CODE_MEMORY_LENGTH
   1210 	    + ESA_REV_B_DATA_MEMORY_LENGTH + 1);
   1211 	sc->savemem = (uint16_t *)malloc(len, M_DEVBUF, M_NOWAIT | M_ZERO);
   1212 	if (sc->savemem == NULL) {
   1213 		aprint_error("%s: unable to allocate suspend buffer\n",
   1214 		    sc->sc_dev.dv_xname);
   1215 		return;
   1216 	}
   1217 
   1218 	sc->powerhook = powerhook_establish(auixp_powerhook, sc);
   1219 	if (sc->powerhook == NULL)
   1220 		aprint_error("%s: WARNING: unable to establish powerhook\n",
   1221 		    sc->sc_dev.dv_xname);
   1222 
   1223 #endif
   1224 
   1225 	/*
   1226 	 * delay further configuration of codecs and audio after interrupts
   1227 	 * are enabled.
   1228 	 */
   1229 	config_interrupts(self, auixp_post_config);
   1230 }
   1231 
   1232 
   1233 /* called from autoconfigure system when interrupts are enabled */
   1234 void
   1235 auixp_post_config(struct device *self)
   1236 {
   1237 	struct auixp_softc *sc;
   1238 	struct auixp_codec *codec;
   1239 	int codec_nr;
   1240 	int res, i;
   1241 
   1242 	sc = (struct auixp_softc *)self;
   1243 	/* detect the AC97 codecs */
   1244 	auixp_autodetect_codecs(sc);
   1245 
   1246 	/* setup audio translation formats : following codec0 (!) */
   1247 	codec = &sc->sc_codec[0];
   1248 	if (!codec->present) {
   1249 		/* nothing??? then invalidate all formats */
   1250 		for (i = 0; i < AUIXP_NFORMATS; i++) {
   1251 			AUFMT_INVALIDATE(&sc->sc_formats[i]);
   1252 		}
   1253 		return;
   1254 	}
   1255 
   1256 	/* copy formats and invalidate entries not suitable for codec0 */
   1257 	memcpy(sc->sc_formats, auixp_formats, sizeof(auixp_formats));
   1258 	sc->has_4ch   = AC97_IS_4CH(codec->codec_if);
   1259 	sc->has_6ch   = AC97_IS_6CH(codec->codec_if);
   1260 	sc->is_fixed  = AC97_IS_FIXED_RATE(codec->codec_if);
   1261 	sc->has_spdif = AC97_HAS_SPDIF(codec->codec_if);
   1262 
   1263 	for (i = 0; i < AUIXP_NFORMATS; i++) {
   1264 		if (sc->is_fixed) {
   1265 			sc->sc_formats[i].frequency_type = 1;
   1266 			sc->sc_formats[i].frequency[0]   = 48000;
   1267 		}
   1268 		switch (sc->sc_formats[i].channels) {
   1269 		case 4 :
   1270 			if (sc->has_4ch)
   1271 				break;
   1272 			AUFMT_INVALIDATE(&sc->sc_formats[i]);
   1273 			break;
   1274 		case 6 :
   1275 			if (sc->has_6ch)
   1276 				break;
   1277 			AUFMT_INVALIDATE(&sc->sc_formats[i]);
   1278 			break;
   1279 		default :
   1280 			break;
   1281 		}
   1282 	}
   1283 
   1284 	/*
   1285 	 * Create all encodings (and/or -translations) based on the formats
   1286 	 * supported. */
   1287 	res = auconv_create_encodings(sc->sc_formats, AUIXP_NFORMATS,
   1288 	    &sc->sc_encodings);
   1289 	if (res) {
   1290 		printf("auixp: auconv_create_encodings failed; "
   1291 		    "no attachments\n");
   1292 		return;
   1293 	}
   1294 
   1295 	/* attach audio devices for all detected codecs */
   1296 	/* XXX wise? look at other multiple-codec able chipsets XXX */
   1297 	for (codec_nr = 0; codec_nr < ATI_IXP_CODECS; codec_nr++) {
   1298 		codec = &sc->sc_codec[codec_nr];
   1299 		if (codec->present)
   1300 			audio_attach_mi(&auixp_hw_if, codec, &sc->sc_dev);
   1301 	}
   1302 
   1303 	/* done! now enable all interrupts we can service */
   1304 	auixp_enable_interrupts(sc);
   1305 }
   1306 
   1307 
   1308 void
   1309 auixp_enable_interrupts(struct auixp_softc *sc)
   1310 {
   1311 	bus_space_tag_t     iot;
   1312 	bus_space_handle_t  ioh;
   1313 	uint32_t value;
   1314 
   1315 	iot = sc->sc_iot;
   1316 	ioh = sc->sc_ioh;
   1317 	/* clear all pending */
   1318 	bus_space_write_4(iot, ioh, ATI_REG_ISR, 0xffffffff);
   1319 
   1320 	/* enable all relevant interrupt sources we can handle */
   1321 	value = bus_space_read_4(iot, ioh, ATI_REG_IER);
   1322 
   1323 	value |= ATI_REG_IER_IO_STATUS_EN;
   1324 #ifdef notyet
   1325 	value |= ATI_REG_IER_IN_XRUN_EN;
   1326 	value |= ATI_REG_IER_OUT_XRUN_EN;
   1327 
   1328 	value |= ATI_REG_IER_SPDIF_XRUN_EN;
   1329 	value |= ATI_REG_IER_SPDF_STATUS_EN;
   1330 #endif
   1331 
   1332 	bus_space_write_4(iot, ioh, ATI_REG_IER, value);
   1333 }
   1334 
   1335 
   1336 void
   1337 auixp_disable_interrupts(struct auixp_softc *sc)
   1338 {
   1339 	bus_space_tag_t     iot;
   1340 	bus_space_handle_t  ioh;
   1341 
   1342 	iot = sc->sc_iot;
   1343 	ioh = sc->sc_ioh;
   1344 	/* disable all interrupt sources */
   1345 	bus_space_write_4(iot, ioh, ATI_REG_IER, 0);
   1346 
   1347 	/* clear all pending */
   1348 	bus_space_write_4(iot, ioh, ATI_REG_ISR, 0xffffffff);
   1349 }
   1350 
   1351 
   1352 /* dismantle what we've set up by undoing setup */
   1353 int
   1354 auixp_detach(struct device *self, int flags)
   1355 {
   1356 	struct auixp_softc *sc;
   1357 
   1358 	sc = (struct auixp_softc *)self;
   1359 	/* XXX shouldn't we just reset the chip? XXX */
   1360 	/*
   1361 	 * should we explicitly disable interrupt generation and acknowledge
   1362 	 * what's left on? better be safe than sorry.
   1363 	 */
   1364 	auixp_disable_interrupts(sc);
   1365 
   1366 	/* tear down .... */
   1367 	config_detach(&sc->sc_dev, flags);	/* XXX OK? XXX */
   1368 
   1369 	if (sc->sc_ih != NULL)
   1370 		pci_intr_disestablish(sc->sc_pct, sc->sc_ih);
   1371 	if (sc->sc_ios)
   1372 		bus_space_unmap(sc->sc_iot, sc->sc_ioh, sc->sc_ios);
   1373 
   1374 	if (sc->savemem)
   1375 		free(sc->savemem, M_DEVBUF);
   1376 
   1377 	return 0;
   1378 }
   1379 
   1380 
   1381 /*
   1382  * codec handling
   1383  *
   1384  * IXP audio support can have upto 3 codecs! are they chained ? or
   1385  * alternative outlets with the same audio feed i.e. with different mixer
   1386  * settings? XXX does NetBSD support more than one audio codec? XXX
   1387  */
   1388 
   1389 
   1390 int
   1391 auixp_attach_codec(void *aux, struct ac97_codec_if *codec_if)
   1392 {
   1393 	struct auixp_codec *ixp_codec;
   1394 
   1395 	ixp_codec = aux;
   1396 	ixp_codec->codec_if = codec_if;
   1397 	ixp_codec->present  = 1;
   1398 
   1399 	return 0;
   1400 }
   1401 
   1402 
   1403 int
   1404 auixp_read_codec(void *aux, uint8_t reg, uint16_t *result)
   1405 {
   1406 	struct auixp_codec *co;
   1407 	struct auixp_softc *sc;
   1408 	bus_space_tag_t     iot;
   1409 	bus_space_handle_t  ioh;
   1410 	uint32_t data;
   1411 	int timeout;
   1412 
   1413 	co  = aux;
   1414 	sc  = co->sc;
   1415 	iot = sc->sc_iot;
   1416 	ioh = sc->sc_ioh;
   1417 	if (auixp_wait_for_codecs(sc, "read_codec"))
   1418 		return 0xffff;
   1419 
   1420 	/* build up command for reading codec register */
   1421 	data = (reg << ATI_REG_PHYS_OUT_ADDR_SHIFT) |
   1422 		ATI_REG_PHYS_OUT_ADDR_EN |
   1423 		ATI_REG_PHYS_OUT_RW |
   1424 		co->codec_nr;
   1425 
   1426 	bus_space_write_4(iot, ioh, ATI_REG_PHYS_OUT_ADDR, data);
   1427 
   1428 	if (auixp_wait_for_codecs(sc, "read_codec"))
   1429 		return 0xffff;
   1430 
   1431 	/* wait until codec info is clocked in */
   1432 	timeout = 500;		/* 500*2 usec -> 0.001 sec */
   1433 	do {
   1434 		data = bus_space_read_4(iot, ioh, ATI_REG_PHYS_IN_ADDR);
   1435 		if (data & ATI_REG_PHYS_IN_READ_FLAG) {
   1436 			DPRINTF(("read ac'97 codec reg 0x%x = 0x%08x\n",
   1437 				reg, data >> ATI_REG_PHYS_IN_DATA_SHIFT)
   1438 			);
   1439 			*result = data >> ATI_REG_PHYS_IN_DATA_SHIFT;
   1440 			return 0;
   1441 		}
   1442 		DELAY(2);
   1443 		timeout--;
   1444 	} while (timeout > 0);
   1445 
   1446 	if (reg < 0x7c)
   1447 		printf("%s: codec read timeout! (reg %x)\n",
   1448 		    sc->sc_dev.dv_xname, reg);
   1449 
   1450 	return 0xffff;
   1451 }
   1452 
   1453 
   1454 int
   1455 auixp_write_codec(void *aux, uint8_t reg, uint16_t data)
   1456 {
   1457 	struct auixp_codec *co;
   1458 	struct auixp_softc *sc;
   1459 	bus_space_tag_t     iot;
   1460 	bus_space_handle_t  ioh;
   1461 	uint32_t value;
   1462 
   1463 	DPRINTF(("write ac'97 codec reg 0x%x = 0x%08x\n", reg, data));
   1464 	co  = aux;
   1465 	sc  = co->sc;
   1466 	iot = sc->sc_iot;
   1467 	ioh = sc->sc_ioh;
   1468 	if (auixp_wait_for_codecs(sc, "write_codec"))
   1469 		return -1;
   1470 
   1471 	/* build up command for writing codec register */
   1472 	value = (((uint32_t) data) << ATI_REG_PHYS_OUT_DATA_SHIFT) |
   1473 		(((uint32_t)  reg) << ATI_REG_PHYS_OUT_ADDR_SHIFT) |
   1474 		ATI_REG_PHYS_OUT_ADDR_EN |
   1475 		co->codec_nr;
   1476 
   1477 	bus_space_write_4(iot, ioh, ATI_REG_PHYS_OUT_ADDR, value);
   1478 
   1479 	return 0;
   1480 }
   1481 
   1482 
   1483 int
   1484 auixp_reset_codec(void *aux)
   1485 {
   1486 
   1487 	/* nothing to be done? */
   1488 	return 0;
   1489 }
   1490 
   1491 
   1492 enum ac97_host_flags
   1493 auixp_flags_codec(void *aux)
   1494 {
   1495 	struct auixp_codec *ixp_codec;
   1496 
   1497 	ixp_codec = aux;
   1498 	return ixp_codec->codec_flags;
   1499 }
   1500 
   1501 
   1502 int
   1503 auixp_wait_for_codecs(struct auixp_softc *sc, char *func)
   1504 {
   1505 	bus_space_tag_t      iot;
   1506 	bus_space_handle_t   ioh;
   1507 	uint32_t value;
   1508 	int timeout;
   1509 
   1510 	iot = sc->sc_iot;
   1511 	ioh = sc->sc_ioh;
   1512 	/* wait until all codec transfers are done */
   1513 	timeout = 500;		/* 500*2 usec -> 0.001 sec */
   1514 	do {
   1515 		value = bus_space_read_4(iot, ioh, ATI_REG_PHYS_OUT_ADDR);
   1516 		if ((value & ATI_REG_PHYS_OUT_ADDR_EN) == 0)
   1517 			return 0;
   1518 
   1519 		DELAY(2);
   1520 		timeout--;
   1521 	} while (timeout > 0);
   1522 
   1523 	printf("%s: %s: timed out\n", func, sc->sc_dev.dv_xname);
   1524 	return -1;
   1525 }
   1526 
   1527 
   1528 
   1529 void
   1530 auixp_autodetect_codecs(struct auixp_softc *sc)
   1531 {
   1532 	bus_space_tag_t      iot;
   1533 	bus_space_handle_t   ioh;
   1534 	struct auixp_codec  *codec;
   1535 	int timeout, codec_nr;
   1536 
   1537 	iot = sc->sc_iot;
   1538 	ioh = sc->sc_ioh;
   1539 	/* ATI IXP can have upto 3 codecs; mark all codecs as not existing */
   1540 	sc->sc_codec_not_ready_bits = 0;
   1541 	sc->sc_num_codecs = 0;
   1542 
   1543 	/* enable all codecs to interrupt as well as the new frame interrupt */
   1544 	bus_space_write_4(iot, ioh, ATI_REG_IER, CODEC_CHECK_BITS);
   1545 
   1546 	/* wait for the interrupts to happen */
   1547 	timeout = 100;		/* 100.000 usec -> 0.1 sec */
   1548 
   1549 	while (timeout > 0) {
   1550 		DELAY(1000);
   1551 		if (sc->sc_codec_not_ready_bits)
   1552 			break;
   1553 		timeout--;
   1554 	}
   1555 
   1556 	if (timeout == 0)
   1557 		printf( "WARNING: timeout during codec detection; "
   1558 			"codecs might be present but haven't interrupted\n");
   1559 
   1560 	/* disable all interrupts for now */
   1561 	auixp_disable_interrupts(sc);
   1562 
   1563 	/* Attach AC97 host interfaces */
   1564 	for (codec_nr = 0; codec_nr < ATI_IXP_CODECS; codec_nr++) {
   1565 		codec = &sc->sc_codec[codec_nr];
   1566 		bzero(codec, sizeof(struct auixp_codec));
   1567 
   1568 		codec->sc       = sc;
   1569 		codec->codec_nr = codec_nr;
   1570 		codec->present  = 0;
   1571 
   1572 		codec->host_if.arg    = codec;
   1573 		codec->host_if.attach = auixp_attach_codec;
   1574 		codec->host_if.read   = auixp_read_codec;
   1575 		codec->host_if.write  = auixp_write_codec;
   1576 		codec->host_if.reset  = auixp_reset_codec;
   1577 		codec->host_if.flags  = auixp_flags_codec;
   1578 	}
   1579 
   1580 	if (!(sc->sc_codec_not_ready_bits & ATI_REG_ISR_CODEC0_NOT_READY)) {
   1581 		/* codec 0 present */
   1582 		// printf("auixp : YAY! codec 0 present!\n");
   1583 		if (ac97_attach(&sc->sc_codec[0].host_if, &sc->sc_dev) == 0)
   1584 			sc->sc_num_codecs++;
   1585 	}
   1586 
   1587 	if (!(sc->sc_codec_not_ready_bits & ATI_REG_ISR_CODEC1_NOT_READY)) {
   1588 		/* codec 1 present */
   1589 		printf("auixp : YAY! codec 1 present!\n");
   1590 		if (ac97_attach(&sc->sc_codec[1].host_if, &sc->sc_dev) == 0)
   1591 			sc->sc_num_codecs++;
   1592 	}
   1593 
   1594 	if (!(sc->sc_codec_not_ready_bits & ATI_REG_ISR_CODEC2_NOT_READY)) {
   1595 		/* codec 2 present */
   1596 		printf("auixp : YAY! codec 2 present!\n");
   1597 		if (ac97_attach(&sc->sc_codec[2].host_if, &sc->sc_dev) == 0)
   1598 			sc->sc_num_codecs++;
   1599 	}
   1600 
   1601 	if (sc->sc_num_codecs == 0) {
   1602 		printf("auixp : BUMMER, no codecs detected or "
   1603 				"no codecs managed to initialise\n");
   1604 		return;
   1605 	}
   1606 
   1607 }
   1608 
   1609 
   1610 
   1611 /* initialisation routines */
   1612 
   1613 void
   1614 auixp_disable_dma(struct auixp_softc *sc, struct auixp_dma *dma)
   1615 {
   1616 	bus_space_tag_t      iot;
   1617 	bus_space_handle_t   ioh;
   1618 	uint32_t value;
   1619 
   1620 	iot = sc->sc_iot;
   1621 	ioh = sc->sc_ioh;
   1622 	/* lets not stress the DMA engine more than nessisary */
   1623 	value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
   1624 	if (value & dma->dma_enable_bit) {
   1625 		value &= ~dma->dma_enable_bit;
   1626 		bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
   1627 	}
   1628 }
   1629 
   1630 
   1631 void
   1632 auixp_enable_dma(struct auixp_softc *sc, struct auixp_dma *dma)
   1633 {
   1634 	bus_space_tag_t      iot;
   1635 	bus_space_handle_t   ioh;
   1636 	uint32_t value;
   1637 
   1638 	iot = sc->sc_iot;
   1639 	ioh = sc->sc_ioh;
   1640 	/* lets not stress the DMA engine more than nessisary */
   1641 	value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
   1642 	if (!(value & dma->dma_enable_bit)) {
   1643 		value |= dma->dma_enable_bit;
   1644 		bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
   1645 	}
   1646 }
   1647 
   1648 
   1649 void
   1650 auixp_reset_aclink(struct auixp_softc *sc)
   1651 {
   1652 
   1653 	/* XXX fix me! XXX */
   1654 	printf("auixp : could reset aclink\n");
   1655 }
   1656 
   1657 
   1658 /* XXX setup saved configuration XXX */
   1659 void
   1660 auixp_config(struct auixp_softc *sc)
   1661 {
   1662 
   1663 	/* XXX fix me XXX */
   1664 	return;
   1665 }
   1666 
   1667 
   1668 /* chip hard init */
   1669 int
   1670 auixp_init(struct auixp_softc *sc)
   1671 {
   1672 	bus_space_tag_t      iot;
   1673 	bus_space_handle_t   ioh;
   1674 	uint32_t value;
   1675 
   1676 	iot = sc->sc_iot;
   1677 	ioh = sc->sc_ioh;
   1678 	/* disable all interrupts and clear all sources */
   1679 	auixp_disable_interrupts(sc);
   1680 
   1681 	/* clear all DMA enables (preserving rest of settings) */
   1682 	value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
   1683 	value &= ~( ATI_REG_CMD_IN_DMA_EN  |
   1684 		    ATI_REG_CMD_OUT_DMA_EN |
   1685 		    ATI_REG_CMD_SPDF_OUT_EN );
   1686 	bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
   1687 
   1688 	/* Reset AC-link */
   1689 	auixp_reset_aclink(sc);
   1690 
   1691 	/*
   1692 	 * codecs get auto-detected later
   1693 	 *
   1694 	 * note: we are NOT enabling interrupts yet, no codecs have been
   1695 	 * detected yet nor is anything else set up
   1696 	 */
   1697 
   1698 	return 0;
   1699 }
   1700 
   1701 
   1702 /*
   1703  * TODO power saving and suspend / resume support
   1704  *
   1705  */
   1706 
   1707 int
   1708 auixp_power(struct auixp_softc *sc, int state)
   1709 {
   1710 	pcitag_t tag;
   1711 	pci_chipset_tag_t pc;
   1712 	pcireg_t data;
   1713 	int pmcapreg;
   1714 
   1715 	tag = sc->sc_tag;
   1716 	pc = sc->sc_pct;
   1717 	if (pci_get_capability(pc, tag, PCI_CAP_PWRMGMT, &pmcapreg, 0)) {
   1718 		data = pci_conf_read(pc, tag, pmcapreg + PCI_PMCSR);
   1719 		if ((data & PCI_PMCSR_STATE_MASK) != state)
   1720 			pci_conf_write(pc, tag, pmcapreg + PCI_PMCSR, state);
   1721 	}
   1722 
   1723 	return 0;
   1724 }
   1725 
   1726 
   1727 void
   1728 auixp_powerhook(int why, void *hdl)
   1729 {
   1730 	struct auixp_softc *sc;
   1731 
   1732 	sc = (struct auixp_softc *)hdl;
   1733 	switch (why) {
   1734 	case PWR_SUSPEND:
   1735 	case PWR_STANDBY:
   1736 		auixp_suspend(sc);
   1737 		break;
   1738 	case PWR_RESUME:
   1739 		auixp_resume(sc);
   1740 /* XXX fix me XXX */
   1741 //		(sc->codec_if->vtbl->restore_ports)(sc->codec_if);
   1742 		break;
   1743 	}
   1744 }
   1745 
   1746 
   1747 int
   1748 auixp_suspend(struct auixp_softc *sc)
   1749 {
   1750 
   1751 	/* XXX no power functions yet XXX */
   1752 	return 0;
   1753 }
   1754 
   1755 
   1756 int
   1757 auixp_resume(struct auixp_softc *sc)
   1758 {
   1759 
   1760 	/* XXX no power functions yet XXX */
   1761 	return 0;
   1762 }
   1763 
   1764 #ifdef DEBUG_AUIXP
   1765 
   1766 void
   1767 auixp_dumpreg(void)
   1768 {
   1769 	struct auixp_softc  *sc;
   1770 	bus_space_tag_t      iot;
   1771 	bus_space_handle_t   ioh;
   1772 	int i;
   1773 
   1774 	sc  = static_sc;
   1775 	iot = sc->sc_iot;
   1776 	ioh = sc->sc_ioh;
   1777 	printf("auixp register dump:\n");
   1778 	for (i = 0; i < 256; i+=4) {
   1779 		printf("\t0x%02x: 0x%08x\n", i, bus_space_read_4(iot, ioh, i));
   1780 	}
   1781 	printf("\n");
   1782 }
   1783 #endif
   1784