Home | History | Annotate | Line # | Download | only in pci
cmdide.c revision 1.32.4.1
      1  1.32.4.1      yamt /*	$NetBSD: cmdide.c,v 1.32.4.1 2012/10/30 17:21:23 yamt Exp $	*/
      2       1.1    bouyer 
      3       1.1    bouyer /*
      4       1.1    bouyer  * Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
      5       1.1    bouyer  *
      6       1.1    bouyer  * Redistribution and use in source and binary forms, with or without
      7       1.1    bouyer  * modification, are permitted provided that the following conditions
      8       1.1    bouyer  * are met:
      9       1.1    bouyer  * 1. Redistributions of source code must retain the above copyright
     10       1.1    bouyer  *    notice, this list of conditions and the following disclaimer.
     11       1.1    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     12       1.1    bouyer  *    notice, this list of conditions and the following disclaimer in the
     13       1.1    bouyer  *    documentation and/or other materials provided with the distribution.
     14       1.1    bouyer  *
     15       1.1    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16       1.1    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17       1.1    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18      1.18     perry  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19       1.1    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20       1.1    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21       1.1    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22       1.1    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23       1.1    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24       1.1    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25       1.1    bouyer  */
     26       1.1    bouyer 
     27      1.19     lukem #include <sys/cdefs.h>
     28  1.32.4.1      yamt __KERNEL_RCSID(0, "$NetBSD: cmdide.c,v 1.32.4.1 2012/10/30 17:21:23 yamt Exp $");
     29      1.19     lukem 
     30       1.1    bouyer #include <sys/param.h>
     31       1.1    bouyer #include <sys/systm.h>
     32       1.1    bouyer #include <sys/malloc.h>
     33       1.1    bouyer 
     34       1.1    bouyer #include <dev/pci/pcivar.h>
     35       1.1    bouyer #include <dev/pci/pcidevs.h>
     36       1.1    bouyer #include <dev/pci/pciidereg.h>
     37       1.1    bouyer #include <dev/pci/pciidevar.h>
     38       1.1    bouyer #include <dev/pci/pciide_cmd_reg.h>
     39       1.1    bouyer 
     40       1.1    bouyer 
     41      1.28      cube static int  cmdide_match(device_t, cfdata_t, void *);
     42      1.28      cube static void cmdide_attach(device_t, device_t, void *);
     43       1.1    bouyer 
     44      1.28      cube CFATTACH_DECL_NEW(cmdide, sizeof(struct pciide_softc),
     45      1.31  jakllsch     cmdide_match, cmdide_attach, pciide_detach, NULL);
     46       1.1    bouyer 
     47      1.32    dyoung static void cmd_chip_map(struct pciide_softc*, const struct pci_attach_args*);
     48      1.32    dyoung static void cmd0643_9_chip_map(struct pciide_softc*,
     49      1.32    dyoung 			       const struct pci_attach_args*);
     50      1.14   thorpej static void cmd0643_9_setup_channel(struct ata_channel*);
     51      1.32    dyoung static void cmd_channel_map(const struct pci_attach_args *,
     52      1.32    dyoung 			    struct pciide_softc *, int);
     53       1.2   thorpej static int  cmd_pci_intr(void *);
     54      1.14   thorpej static void cmd646_9_irqack(struct ata_channel *);
     55      1.32    dyoung static void cmd680_chip_map(struct pciide_softc*,
     56      1.32    dyoung 			    const struct pci_attach_args*);
     57      1.14   thorpej static void cmd680_setup_channel(struct ata_channel*);
     58      1.32    dyoung static void cmd680_channel_map(const struct pci_attach_args *,
     59      1.32    dyoung 			       struct pciide_softc *, int);
     60       1.1    bouyer 
     61       1.2   thorpej static const struct pciide_product_desc pciide_cmd_products[] =  {
     62       1.1    bouyer 	{ PCI_PRODUCT_CMDTECH_640,
     63       1.1    bouyer 	  0,
     64       1.1    bouyer 	  "CMD Technology PCI0640",
     65       1.1    bouyer 	  cmd_chip_map
     66       1.1    bouyer 	},
     67       1.1    bouyer 	{ PCI_PRODUCT_CMDTECH_643,
     68       1.1    bouyer 	  0,
     69       1.1    bouyer 	  "CMD Technology PCI0643",
     70       1.1    bouyer 	  cmd0643_9_chip_map,
     71       1.1    bouyer 	},
     72       1.1    bouyer 	{ PCI_PRODUCT_CMDTECH_646,
     73       1.1    bouyer 	  0,
     74       1.1    bouyer 	  "CMD Technology PCI0646",
     75       1.1    bouyer 	  cmd0643_9_chip_map,
     76       1.1    bouyer 	},
     77       1.1    bouyer 	{ PCI_PRODUCT_CMDTECH_648,
     78       1.3   mycroft 	  0,
     79       1.1    bouyer 	  "CMD Technology PCI0648",
     80       1.1    bouyer 	  cmd0643_9_chip_map,
     81       1.1    bouyer 	},
     82       1.1    bouyer 	{ PCI_PRODUCT_CMDTECH_649,
     83       1.3   mycroft 	  0,
     84       1.1    bouyer 	  "CMD Technology PCI0649",
     85       1.1    bouyer 	  cmd0643_9_chip_map,
     86       1.1    bouyer 	},
     87       1.1    bouyer 	{ PCI_PRODUCT_CMDTECH_680,
     88       1.3   mycroft 	  0,
     89       1.1    bouyer 	  "Silicon Image 0680",
     90       1.1    bouyer 	  cmd680_chip_map,
     91       1.1    bouyer 	},
     92       1.1    bouyer 	{ 0,
     93       1.1    bouyer 	  0,
     94       1.1    bouyer 	  NULL,
     95       1.1    bouyer 	  NULL
     96       1.1    bouyer 	}
     97       1.1    bouyer };
     98       1.1    bouyer 
     99       1.2   thorpej static int
    100      1.28      cube cmdide_match(device_t parent, cfdata_t match, void *aux)
    101       1.1    bouyer {
    102       1.1    bouyer 	struct pci_attach_args *pa = aux;
    103       1.1    bouyer 
    104       1.1    bouyer 	if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CMDTECH) {
    105       1.1    bouyer 		if (pciide_lookup_product(pa->pa_id, pciide_cmd_products))
    106       1.1    bouyer 			return (2);
    107       1.1    bouyer 	}
    108       1.1    bouyer 	return (0);
    109       1.1    bouyer }
    110       1.1    bouyer 
    111       1.2   thorpej static void
    112      1.28      cube cmdide_attach(device_t parent, device_t self, void *aux)
    113       1.1    bouyer {
    114       1.1    bouyer 	struct pci_attach_args *pa = aux;
    115      1.28      cube 	struct pciide_softc *sc = device_private(self);
    116      1.28      cube 
    117      1.28      cube 	sc->sc_wdcdev.sc_atac.atac_dev = self;
    118       1.1    bouyer 
    119       1.1    bouyer 	pciide_common_attach(sc, pa,
    120       1.1    bouyer 	    pciide_lookup_product(pa->pa_id, pciide_cmd_products));
    121       1.1    bouyer 
    122       1.1    bouyer }
    123       1.1    bouyer 
    124       1.2   thorpej static void
    125      1.32    dyoung cmd_channel_map(const struct pci_attach_args *pa, struct pciide_softc *sc,
    126       1.2   thorpej     int channel)
    127       1.1    bouyer {
    128       1.1    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
    129       1.1    bouyer 	u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
    130       1.1    bouyer 	int interface, one_channel;
    131       1.1    bouyer 
    132      1.18     perry 	/*
    133       1.1    bouyer 	 * The 0648/0649 can be told to identify as a RAID controller.
    134       1.1    bouyer 	 * In this case, we have to fake interface
    135       1.1    bouyer 	 */
    136       1.1    bouyer 	if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
    137       1.1    bouyer 		interface = PCIIDE_INTERFACE_SETTABLE(0) |
    138       1.1    bouyer 		    PCIIDE_INTERFACE_SETTABLE(1);
    139       1.1    bouyer 		if (pciide_pci_read(pa->pa_pc, pa->pa_tag, CMD_CONF) &
    140       1.1    bouyer 		    CMD_CONF_DSA1)
    141       1.1    bouyer 			interface |= PCIIDE_INTERFACE_PCI(0) |
    142       1.1    bouyer 			    PCIIDE_INTERFACE_PCI(1);
    143       1.1    bouyer 	} else {
    144       1.1    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
    145       1.1    bouyer 	}
    146       1.1    bouyer 
    147      1.14   thorpej 	sc->wdc_chanarray[channel] = &cp->ata_channel;
    148       1.1    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
    149      1.14   thorpej 	cp->ata_channel.ch_channel = channel;
    150      1.16   thorpej 	cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
    151       1.1    bouyer 
    152       1.1    bouyer 	/*
    153      1.26       wiz 	 * Older CMD64X doesn't have independent channels
    154       1.1    bouyer 	 */
    155       1.1    bouyer 	switch (sc->sc_pp->ide_product) {
    156       1.1    bouyer 	case PCI_PRODUCT_CMDTECH_649:
    157       1.1    bouyer 		one_channel = 0;
    158       1.1    bouyer 		break;
    159       1.1    bouyer 	default:
    160       1.1    bouyer 		one_channel = 1;
    161       1.1    bouyer 		break;
    162       1.1    bouyer 	}
    163       1.1    bouyer 
    164       1.1    bouyer 	if (channel > 0 && one_channel) {
    165      1.14   thorpej 		cp->ata_channel.ch_queue =
    166      1.14   thorpej 		    sc->pciide_channels[0].ata_channel.ch_queue;
    167       1.1    bouyer 	} else {
    168      1.14   thorpej 		cp->ata_channel.ch_queue =
    169       1.8   thorpej 		    malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
    170       1.1    bouyer 	}
    171      1.14   thorpej 	if (cp->ata_channel.ch_queue == NULL) {
    172       1.1    bouyer 		aprint_error("%s %s channel: "
    173       1.1    bouyer 		    "can't allocate memory for command queue",
    174      1.28      cube 		    device_xname(sc->sc_wdcdev.sc_atac.atac_dev), cp->name);
    175       1.1    bouyer 		    return;
    176       1.1    bouyer 	}
    177       1.1    bouyer 
    178      1.28      cube 	aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    179      1.28      cube 	    "%s channel %s to %s mode\n", cp->name,
    180       1.1    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
    181       1.1    bouyer 	    "configured" : "wired",
    182       1.1    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
    183       1.1    bouyer 	    "native-PCI" : "compatibility");
    184       1.1    bouyer 
    185       1.1    bouyer 	/*
    186       1.1    bouyer 	 * with a CMD PCI64x, if we get here, the first channel is enabled:
    187       1.1    bouyer 	 * there's no way to disable the first channel without disabling
    188       1.1    bouyer 	 * the whole device
    189       1.1    bouyer 	 */
    190       1.1    bouyer 	if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
    191      1.28      cube 		aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    192      1.28      cube 		    "%s channel ignored (disabled)\n", cp->name);
    193      1.14   thorpej 		cp->ata_channel.ch_flags |= ATACH_DISABLED;
    194       1.1    bouyer 		return;
    195       1.1    bouyer 	}
    196       1.1    bouyer 
    197      1.30  jakllsch 	pciide_mapchan(pa, cp, interface, cmd_pci_intr);
    198       1.1    bouyer }
    199       1.1    bouyer 
    200       1.2   thorpej static int
    201       1.2   thorpej cmd_pci_intr(void *arg)
    202       1.1    bouyer {
    203       1.1    bouyer 	struct pciide_softc *sc = arg;
    204       1.1    bouyer 	struct pciide_channel *cp;
    205      1.14   thorpej 	struct ata_channel *wdc_cp;
    206      1.18     perry 	int i, rv, crv;
    207       1.1    bouyer 	u_int32_t priirq, secirq;
    208       1.1    bouyer 
    209       1.1    bouyer 	rv = 0;
    210       1.1    bouyer 	priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
    211       1.1    bouyer 	secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
    212      1.16   thorpej 	for (i = 0; i < sc->sc_wdcdev.sc_atac.atac_nchannels; i++) {
    213       1.1    bouyer 		cp = &sc->pciide_channels[i];
    214      1.14   thorpej 		wdc_cp = &cp->ata_channel;
    215       1.1    bouyer 		/* If a compat channel skip. */
    216       1.1    bouyer 		if (cp->compat)
    217       1.1    bouyer 			continue;
    218       1.1    bouyer 		if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
    219       1.1    bouyer 		    (i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
    220       1.1    bouyer 			crv = wdcintr(wdc_cp);
    221      1.11    bouyer 			if (crv == 0) {
    222      1.28      cube 				aprint_error("%s:%d: bogus intr\n",
    223      1.28      cube 				    device_xname(
    224      1.28      cube 				      sc->sc_wdcdev.sc_atac.atac_dev), i);
    225      1.11    bouyer 				sc->sc_wdcdev.irqack(wdc_cp);
    226      1.11    bouyer 			} else
    227       1.1    bouyer 				rv = 1;
    228       1.1    bouyer 		}
    229       1.1    bouyer 	}
    230       1.1    bouyer 	return rv;
    231       1.1    bouyer }
    232       1.1    bouyer 
    233       1.2   thorpej static void
    234      1.32    dyoung cmd_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
    235       1.1    bouyer {
    236       1.1    bouyer 	int channel;
    237       1.1    bouyer 
    238       1.1    bouyer 	/*
    239       1.1    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
    240       1.5       wiz 	 * and base addresses registers can be disabled at
    241       1.1    bouyer 	 * hardware level. In this case, the device is wired
    242       1.1    bouyer 	 * in compat mode and its first channel is always enabled,
    243       1.1    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
    244       1.1    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
    245       1.1    bouyer 	 * can't be disabled.
    246       1.1    bouyer 	 */
    247       1.1    bouyer 
    248       1.1    bouyer #ifdef PCIIDE_CMD064x_DISABLE
    249       1.1    bouyer 	if (pciide_chipen(sc, pa) == 0)
    250       1.1    bouyer 		return;
    251       1.1    bouyer #endif
    252       1.1    bouyer 
    253      1.28      cube 	aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    254      1.28      cube 	    "hardware does not support DMA\n");
    255       1.1    bouyer 	sc->sc_dma_ok = 0;
    256       1.1    bouyer 
    257      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
    258      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
    259      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16;
    260  1.32.4.1      yamt 	sc->sc_wdcdev.wdc_maxdrives = 2;
    261       1.1    bouyer 
    262      1.14   thorpej 	wdc_allocate_regs(&sc->sc_wdcdev);
    263      1.14   thorpej 
    264      1.16   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
    265      1.16   thorpej 	     channel++) {
    266       1.1    bouyer 		cmd_channel_map(pa, sc, channel);
    267       1.1    bouyer 	}
    268       1.1    bouyer }
    269       1.1    bouyer 
    270       1.2   thorpej static void
    271      1.32    dyoung cmd0643_9_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
    272      1.18     perry {
    273       1.1    bouyer 	int channel;
    274       1.1    bouyer 	pcireg_t rev = PCI_REVISION(pa->pa_class);
    275       1.1    bouyer 
    276       1.1    bouyer 	/*
    277       1.1    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
    278       1.5       wiz 	 * and base addresses registers can be disabled at
    279       1.1    bouyer 	 * hardware level. In this case, the device is wired
    280       1.1    bouyer 	 * in compat mode and its first channel is always enabled,
    281       1.1    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
    282       1.1    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
    283       1.1    bouyer 	 * can't be disabled.
    284       1.1    bouyer 	 */
    285       1.1    bouyer 
    286       1.1    bouyer #ifdef PCIIDE_CMD064x_DISABLE
    287       1.1    bouyer 	if (pciide_chipen(sc, pa) == 0)
    288       1.1    bouyer 		return;
    289       1.1    bouyer #endif
    290       1.1    bouyer 
    291      1.28      cube 	aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    292      1.28      cube 	    "bus-master DMA support present");
    293       1.1    bouyer 	pciide_mapreg_dma(sc, pa);
    294      1.27        ad 	aprint_verbose("\n");
    295      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
    296       1.1    bouyer 	if (sc->sc_dma_ok) {
    297      1.16   thorpej 		sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
    298       1.1    bouyer 		switch (sc->sc_pp->ide_product) {
    299       1.1    bouyer 		case PCI_PRODUCT_CMDTECH_649:
    300      1.16   thorpej 			sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_UDMA;
    301      1.16   thorpej 			sc->sc_wdcdev.sc_atac.atac_udma_cap = 5;
    302       1.1    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
    303       1.1    bouyer 			break;
    304       1.1    bouyer 		case PCI_PRODUCT_CMDTECH_648:
    305      1.16   thorpej 			sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_UDMA;
    306      1.16   thorpej 			sc->sc_wdcdev.sc_atac.atac_udma_cap = 4;
    307       1.1    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
    308       1.1    bouyer 			break;
    309       1.1    bouyer 		case PCI_PRODUCT_CMDTECH_646:
    310       1.1    bouyer 			if (rev >= CMD0646U2_REV) {
    311      1.16   thorpej 				sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_UDMA;
    312      1.16   thorpej 				sc->sc_wdcdev.sc_atac.atac_udma_cap = 2;
    313       1.1    bouyer 			} else if (rev >= CMD0646U_REV) {
    314       1.1    bouyer 			/*
    315       1.1    bouyer 			 * Linux's driver claims that the 646U is broken
    316       1.1    bouyer 			 * with UDMA. Only enable it if we know what we're
    317       1.1    bouyer 			 * doing
    318       1.1    bouyer 			 */
    319       1.1    bouyer #ifdef PCIIDE_CMD0646U_ENABLEUDMA
    320      1.16   thorpej 				sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_UDMA;
    321      1.16   thorpej 				sc->sc_wdcdev.sc_atac.atac_udma_cap = 2;
    322       1.1    bouyer #endif
    323       1.1    bouyer 				/* explicitly disable UDMA */
    324       1.1    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
    325       1.1    bouyer 				    CMD_UDMATIM(0), 0);
    326       1.1    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
    327       1.1    bouyer 				    CMD_UDMATIM(1), 0);
    328       1.1    bouyer 			}
    329       1.1    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
    330       1.1    bouyer 			break;
    331       1.1    bouyer 		default:
    332       1.1    bouyer 			sc->sc_wdcdev.irqack = pciide_irqack;
    333       1.1    bouyer 		}
    334       1.1    bouyer 	}
    335       1.1    bouyer 
    336      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
    337      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
    338      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
    339      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
    340      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_set_modes = cmd0643_9_setup_channel;
    341  1.32.4.1      yamt 	sc->sc_wdcdev.wdc_maxdrives = 2;
    342       1.1    bouyer 
    343      1.13   thorpej 	ATADEBUG_PRINT(("cmd0643_9_chip_map: old timings reg 0x%x 0x%x\n",
    344       1.1    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
    345       1.1    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
    346       1.1    bouyer 		DEBUG_PROBE);
    347       1.1    bouyer 
    348      1.14   thorpej 	wdc_allocate_regs(&sc->sc_wdcdev);
    349      1.14   thorpej 
    350      1.16   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
    351      1.16   thorpej 	     channel++)
    352       1.1    bouyer 		cmd_channel_map(pa, sc, channel);
    353       1.4    simonb 
    354       1.1    bouyer 	/*
    355       1.1    bouyer 	 * note - this also makes sure we clear the irq disable and reset
    356       1.1    bouyer 	 * bits
    357       1.1    bouyer 	 */
    358       1.1    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
    359      1.13   thorpej 	ATADEBUG_PRINT(("cmd0643_9_chip_map: timings reg now 0x%x 0x%x\n",
    360       1.1    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
    361       1.1    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
    362       1.1    bouyer 	    DEBUG_PROBE);
    363       1.1    bouyer }
    364       1.1    bouyer 
    365       1.2   thorpej static void
    366      1.14   thorpej cmd0643_9_setup_channel(struct ata_channel *chp)
    367       1.1    bouyer {
    368       1.1    bouyer 	struct ata_drive_datas *drvp;
    369       1.1    bouyer 	u_int8_t tim;
    370       1.1    bouyer 	u_int32_t idedma_ctl, udma_reg;
    371      1.17   thorpej 	int drive, s;
    372      1.15   thorpej 	struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
    373      1.15   thorpej 	struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
    374       1.1    bouyer 
    375       1.1    bouyer 	idedma_ctl = 0;
    376       1.1    bouyer 	/* setup DMA if needed */
    377       1.1    bouyer 	pciide_channel_dma_setup(cp);
    378       1.1    bouyer 
    379       1.1    bouyer 	for (drive = 0; drive < 2; drive++) {
    380       1.1    bouyer 		drvp = &chp->ch_drive[drive];
    381       1.1    bouyer 		/* If no drive, skip */
    382  1.32.4.1      yamt 		if (drvp->drive_type == ATA_DRIVET_NONE)
    383       1.1    bouyer 			continue;
    384       1.1    bouyer 		/* add timing values, setup DMA if needed */
    385       1.1    bouyer 		tim = cmd0643_9_data_tim_pio[drvp->PIO_mode];
    386  1.32.4.1      yamt 		if (drvp->drive_flags & (ATA_DRIVE_DMA | ATA_DRIVE_UDMA)) {
    387  1.32.4.1      yamt 			if (drvp->drive_flags & ATA_DRIVE_UDMA) {
    388       1.1    bouyer 				/* UltraDMA on a 646U2, 0648 or 0649 */
    389      1.17   thorpej 				s = splbio();
    390  1.32.4.1      yamt 				drvp->drive_flags &= ~ATA_DRIVE_DMA;
    391      1.17   thorpej 				splx(s);
    392       1.1    bouyer 				udma_reg = pciide_pci_read(sc->sc_pc,
    393      1.10   thorpej 				    sc->sc_tag, CMD_UDMATIM(chp->ch_channel));
    394       1.1    bouyer 				if (drvp->UDMA_mode > 2 &&
    395       1.1    bouyer 				    (pciide_pci_read(sc->sc_pc, sc->sc_tag,
    396       1.1    bouyer 				    CMD_BICSR) &
    397      1.10   thorpej 				    CMD_BICSR_80(chp->ch_channel)) == 0)
    398       1.1    bouyer 					drvp->UDMA_mode = 2;
    399       1.1    bouyer 				if (drvp->UDMA_mode > 2)
    400       1.1    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA33(drive);
    401      1.18     perry 				else if (sc->sc_wdcdev.sc_atac.atac_udma_cap > 2)
    402       1.1    bouyer 					udma_reg |= CMD_UDMATIM_UDMA33(drive);
    403       1.1    bouyer 				udma_reg |= CMD_UDMATIM_UDMA(drive);
    404       1.1    bouyer 				udma_reg &= ~(CMD_UDMATIM_TIM_MASK <<
    405       1.1    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
    406       1.1    bouyer 				udma_reg |=
    407       1.1    bouyer 				    (cmd0646_9_tim_udma[drvp->UDMA_mode] <<
    408       1.1    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
    409       1.1    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
    410      1.10   thorpej 				    CMD_UDMATIM(chp->ch_channel), udma_reg);
    411       1.1    bouyer 			} else {
    412       1.1    bouyer 				/*
    413       1.1    bouyer 				 * use Multiword DMA.
    414       1.1    bouyer 				 * Timings will be used for both PIO and DMA,
    415       1.1    bouyer 				 * so adjust DMA mode if needed
    416       1.1    bouyer 				 * if we have a 0646U2/8/9, turn off UDMA
    417       1.1    bouyer 				 */
    418      1.16   thorpej 				if (sc->sc_wdcdev.sc_atac.atac_cap & ATAC_CAP_UDMA) {
    419       1.1    bouyer 					udma_reg = pciide_pci_read(sc->sc_pc,
    420       1.1    bouyer 					    sc->sc_tag,
    421      1.10   thorpej 					    CMD_UDMATIM(chp->ch_channel));
    422       1.1    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA(drive);
    423       1.1    bouyer 					pciide_pci_write(sc->sc_pc, sc->sc_tag,
    424      1.10   thorpej 					    CMD_UDMATIM(chp->ch_channel),
    425       1.1    bouyer 					    udma_reg);
    426       1.1    bouyer 				}
    427       1.1    bouyer 				if (drvp->PIO_mode >= 3 &&
    428       1.1    bouyer 				    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
    429       1.1    bouyer 					drvp->DMA_mode = drvp->PIO_mode - 2;
    430       1.1    bouyer 				}
    431       1.1    bouyer 				tim = cmd0643_9_data_tim_dma[drvp->DMA_mode];
    432       1.1    bouyer 			}
    433       1.1    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
    434       1.1    bouyer 		}
    435       1.1    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag,
    436      1.10   thorpej 		    CMD_DATA_TIM(chp->ch_channel, drive), tim);
    437       1.1    bouyer 	}
    438       1.1    bouyer 	if (idedma_ctl != 0) {
    439       1.1    bouyer 		/* Add software bits in status register */
    440       1.6      fvdl 		bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
    441       1.1    bouyer 		    idedma_ctl);
    442       1.1    bouyer 	}
    443       1.1    bouyer }
    444       1.1    bouyer 
    445       1.2   thorpej static void
    446      1.14   thorpej cmd646_9_irqack(struct ata_channel *chp)
    447       1.1    bouyer {
    448       1.1    bouyer 	u_int32_t priirq, secirq;
    449      1.15   thorpej 	struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
    450       1.1    bouyer 
    451      1.10   thorpej 	if (chp->ch_channel == 0) {
    452       1.1    bouyer 		priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
    453       1.1    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_CONF, priirq);
    454       1.1    bouyer 	} else {
    455       1.1    bouyer 		secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
    456       1.1    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23, secirq);
    457       1.1    bouyer 	}
    458       1.1    bouyer 	pciide_irqack(chp);
    459       1.1    bouyer }
    460       1.1    bouyer 
    461       1.2   thorpej static void
    462      1.32    dyoung cmd680_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
    463      1.18     perry {
    464       1.1    bouyer 	int channel;
    465       1.1    bouyer 
    466       1.1    bouyer 	if (pciide_chipen(sc, pa) == 0)
    467       1.1    bouyer 		return;
    468       1.1    bouyer 
    469      1.28      cube 	aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    470      1.28      cube 	    "bus-master DMA support present");
    471       1.1    bouyer 	pciide_mapreg_dma(sc, pa);
    472      1.27        ad 	aprint_verbose("\n");
    473      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
    474       1.1    bouyer 	if (sc->sc_dma_ok) {
    475      1.16   thorpej 		sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
    476      1.16   thorpej 		sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_UDMA;
    477      1.16   thorpej 		sc->sc_wdcdev.sc_atac.atac_udma_cap = 6;
    478       1.1    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
    479       1.1    bouyer 	}
    480       1.1    bouyer 
    481      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
    482      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
    483      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
    484      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
    485      1.16   thorpej 	sc->sc_wdcdev.sc_atac.atac_set_modes = cmd680_setup_channel;
    486  1.32.4.1      yamt 	sc->sc_wdcdev.wdc_maxdrives = 2;
    487       1.1    bouyer 
    488       1.1    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, 0x80, 0x00);
    489       1.1    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, 0x84, 0x00);
    490       1.1    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, 0x8a,
    491       1.1    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, 0x8a) | 0x01);
    492      1.14   thorpej 
    493      1.14   thorpej 	wdc_allocate_regs(&sc->sc_wdcdev);
    494      1.14   thorpej 
    495      1.16   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
    496      1.16   thorpej 	     channel++)
    497       1.1    bouyer 		cmd680_channel_map(pa, sc, channel);
    498       1.1    bouyer }
    499       1.1    bouyer 
    500       1.2   thorpej static void
    501      1.32    dyoung cmd680_channel_map(const struct pci_attach_args *pa, struct pciide_softc *sc,
    502       1.2   thorpej     int channel)
    503       1.1    bouyer {
    504       1.1    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
    505       1.1    bouyer 	int interface, i, reg;
    506       1.1    bouyer 	static const u_int8_t init_val[] =
    507       1.1    bouyer 	    {             0x8a, 0x32, 0x8a, 0x32, 0x8a, 0x32,
    508       1.1    bouyer 	      0x92, 0x43, 0x92, 0x43, 0x09, 0x40, 0x09, 0x40 };
    509       1.1    bouyer 
    510       1.1    bouyer 	if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
    511       1.1    bouyer 		interface = PCIIDE_INTERFACE_SETTABLE(0) |
    512       1.1    bouyer 		    PCIIDE_INTERFACE_SETTABLE(1);
    513       1.1    bouyer 		interface |= PCIIDE_INTERFACE_PCI(0) |
    514       1.1    bouyer 		    PCIIDE_INTERFACE_PCI(1);
    515       1.1    bouyer 	} else {
    516       1.1    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
    517       1.1    bouyer 	}
    518       1.1    bouyer 
    519      1.14   thorpej 	sc->wdc_chanarray[channel] = &cp->ata_channel;
    520       1.1    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
    521      1.14   thorpej 	cp->ata_channel.ch_channel = channel;
    522      1.16   thorpej 	cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
    523       1.1    bouyer 
    524      1.14   thorpej 	cp->ata_channel.ch_queue =
    525       1.8   thorpej 	    malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
    526      1.14   thorpej 	if (cp->ata_channel.ch_queue == NULL) {
    527       1.1    bouyer 		aprint_error("%s %s channel: "
    528       1.1    bouyer 		    "can't allocate memory for command queue",
    529      1.28      cube 		    device_xname(sc->sc_wdcdev.sc_atac.atac_dev), cp->name);
    530       1.1    bouyer 		    return;
    531       1.1    bouyer 	}
    532       1.1    bouyer 
    533       1.1    bouyer 	/* XXX */
    534       1.1    bouyer 	reg = 0xa2 + channel * 16;
    535       1.1    bouyer 	for (i = 0; i < sizeof(init_val); i++)
    536       1.1    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, reg + i, init_val[i]);
    537       1.1    bouyer 
    538      1.28      cube 	aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    539      1.28      cube 	    "%s channel %s to %s mode\n", cp->name,
    540       1.1    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
    541       1.1    bouyer 	    "configured" : "wired",
    542       1.1    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
    543       1.1    bouyer 	    "native-PCI" : "compatibility");
    544       1.1    bouyer 
    545      1.30  jakllsch 	pciide_mapchan(pa, cp, interface, pciide_pci_intr);
    546       1.1    bouyer }
    547       1.1    bouyer 
    548       1.2   thorpej static void
    549      1.14   thorpej cmd680_setup_channel(struct ata_channel *chp)
    550       1.1    bouyer {
    551       1.1    bouyer 	struct ata_drive_datas *drvp;
    552       1.1    bouyer 	u_int8_t mode, off, scsc;
    553       1.1    bouyer 	u_int16_t val;
    554       1.1    bouyer 	u_int32_t idedma_ctl;
    555      1.17   thorpej 	int drive, s;
    556      1.15   thorpej 	struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
    557      1.15   thorpej 	struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
    558       1.1    bouyer 	pci_chipset_tag_t pc = sc->sc_pc;
    559       1.1    bouyer 	pcitag_t pa = sc->sc_tag;
    560       1.1    bouyer 	static const u_int8_t udma2_tbl[] =
    561       1.1    bouyer 	    { 0x0f, 0x0b, 0x07, 0x06, 0x03, 0x02, 0x01 };
    562       1.1    bouyer 	static const u_int8_t udma_tbl[] =
    563       1.1    bouyer 	    { 0x0c, 0x07, 0x05, 0x04, 0x02, 0x01, 0x00 };
    564       1.1    bouyer 	static const u_int16_t dma_tbl[] =
    565       1.1    bouyer 	    { 0x2208, 0x10c2, 0x10c1 };
    566       1.1    bouyer 	static const u_int16_t pio_tbl[] =
    567       1.1    bouyer 	    { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
    568       1.1    bouyer 
    569       1.1    bouyer 	idedma_ctl = 0;
    570       1.1    bouyer 	pciide_channel_dma_setup(cp);
    571      1.10   thorpej 	mode = pciide_pci_read(pc, pa, 0x80 + chp->ch_channel * 4);
    572       1.1    bouyer 
    573       1.1    bouyer 	for (drive = 0; drive < 2; drive++) {
    574       1.1    bouyer 		drvp = &chp->ch_drive[drive];
    575       1.1    bouyer 		/* If no drive, skip */
    576  1.32.4.1      yamt 		if (drvp->drive_type == ATA_DRIVET_NONE)
    577       1.1    bouyer 			continue;
    578       1.1    bouyer 		mode &= ~(0x03 << (drive * 4));
    579  1.32.4.1      yamt 		if (drvp->drive_flags & ATA_DRIVE_UDMA) {
    580      1.17   thorpej 			s = splbio();
    581  1.32.4.1      yamt 			drvp->drive_flags &= ~ATA_DRIVE_DMA;
    582      1.17   thorpej 			splx(s);
    583      1.10   thorpej 			off = 0xa0 + chp->ch_channel * 16;
    584       1.1    bouyer 			if (drvp->UDMA_mode > 2 &&
    585       1.1    bouyer 			    (pciide_pci_read(pc, pa, off) & 0x01) == 0)
    586       1.1    bouyer 				drvp->UDMA_mode = 2;
    587       1.1    bouyer 			scsc = pciide_pci_read(pc, pa, 0x8a);
    588       1.1    bouyer 			if (drvp->UDMA_mode == 6 && (scsc & 0x30) == 0) {
    589       1.1    bouyer 				pciide_pci_write(pc, pa, 0x8a, scsc | 0x01);
    590       1.1    bouyer 				scsc = pciide_pci_read(pc, pa, 0x8a);
    591       1.1    bouyer 				if ((scsc & 0x30) == 0)
    592       1.1    bouyer 					drvp->UDMA_mode = 5;
    593       1.1    bouyer 			}
    594       1.1    bouyer 			mode |= 0x03 << (drive * 4);
    595      1.10   thorpej 			off = 0xac + chp->ch_channel * 16 + drive * 2;
    596       1.1    bouyer 			val = pciide_pci_read(pc, pa, off) & ~0x3f;
    597       1.1    bouyer 			if (scsc & 0x30)
    598       1.1    bouyer 				val |= udma2_tbl[drvp->UDMA_mode];
    599       1.1    bouyer 			else
    600       1.1    bouyer 				val |= udma_tbl[drvp->UDMA_mode];
    601       1.1    bouyer 			pciide_pci_write(pc, pa, off, val);
    602       1.1    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
    603  1.32.4.1      yamt 		} else if (drvp->drive_flags & ATA_DRIVE_DMA) {
    604       1.1    bouyer 			mode |= 0x02 << (drive * 4);
    605      1.10   thorpej 			off = 0xa8 + chp->ch_channel * 16 + drive * 2;
    606       1.1    bouyer 			val = dma_tbl[drvp->DMA_mode];
    607       1.1    bouyer 			pciide_pci_write(pc, pa, off, val & 0xff);
    608      1.20  christos 			pciide_pci_write(pc, pa, off+1, val >> 8);
    609       1.1    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
    610       1.1    bouyer 		} else {
    611       1.1    bouyer 			mode |= 0x01 << (drive * 4);
    612      1.10   thorpej 			off = 0xa4 + chp->ch_channel * 16 + drive * 2;
    613       1.1    bouyer 			val = pio_tbl[drvp->PIO_mode];
    614       1.1    bouyer 			pciide_pci_write(pc, pa, off, val & 0xff);
    615      1.20  christos 			pciide_pci_write(pc, pa, off+1, val >> 8);
    616       1.1    bouyer 		}
    617       1.1    bouyer 	}
    618       1.1    bouyer 
    619      1.10   thorpej 	pciide_pci_write(pc, pa, 0x80 + chp->ch_channel * 4, mode);
    620       1.1    bouyer 	if (idedma_ctl != 0) {
    621       1.1    bouyer 		/* Add software bits in status register */
    622       1.6      fvdl 		bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
    623       1.1    bouyer 		    idedma_ctl);
    624       1.1    bouyer 	}
    625       1.1    bouyer }
    626