cypide.c revision 1.15 1 /* $NetBSD: cypide.c,v 1.15 2005/05/24 05:25:15 lukem Exp $ */
2
3 /*
4 * Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Manuel Bouyer.
17 * 4. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 *
31 */
32
33 #include <sys/cdefs.h>
34 __KERNEL_RCSID(0, "$NetBSD: cypide.c,v 1.15 2005/05/24 05:25:15 lukem Exp $");
35
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/malloc.h>
39
40 #include <dev/pci/pcivar.h>
41 #include <dev/pci/pcidevs.h>
42 #include <dev/pci/pciidereg.h>
43 #include <dev/pci/pciidevar.h>
44 #include <dev/pci/pciide_cy693_reg.h>
45 #include <dev/pci/cy82c693var.h>
46
47 static void cy693_chip_map(struct pciide_softc*, struct pci_attach_args*);
48 static void cy693_setup_channel(struct ata_channel*);
49
50 static int cypide_match(struct device *, struct cfdata *, void *);
51 static void cypide_attach(struct device *, struct device *, void *);
52
53 CFATTACH_DECL(cypide, sizeof(struct pciide_softc),
54 cypide_match, cypide_attach, NULL, NULL);
55
56 static const struct pciide_product_desc pciide_cypress_products[] = {
57 { PCI_PRODUCT_CONTAQ_82C693,
58 IDE_16BIT_IOSPACE,
59 "Cypress 82C693 IDE Controller",
60 cy693_chip_map,
61 },
62 { 0,
63 0,
64 NULL,
65 NULL
66 }
67 };
68
69 static int
70 cypide_match(struct device *parent, struct cfdata *match, void *aux)
71 {
72 struct pci_attach_args *pa = aux;
73
74 if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CONTAQ &&
75 PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
76 PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
77 if (pciide_lookup_product(pa->pa_id, pciide_cypress_products))
78 return (2);
79 }
80 return (0);
81 }
82
83 static void
84 cypide_attach(struct device *parent, struct device *self, void *aux)
85 {
86 struct pci_attach_args *pa = aux;
87 struct pciide_softc *sc = (struct pciide_softc *)self;
88
89 pciide_common_attach(sc, pa,
90 pciide_lookup_product(pa->pa_id, pciide_cypress_products));
91
92 }
93
94 static void
95 cy693_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
96 {
97 struct pciide_channel *cp;
98 pcireg_t interface = PCI_INTERFACE(pa->pa_class);
99 bus_size_t cmdsize, ctlsize;
100
101 if (pciide_chipen(sc, pa) == 0)
102 return;
103
104 /*
105 * this chip has 2 PCI IDE functions, one for primary and one for
106 * secondary. So we need to call pciide_mapregs_compat() with
107 * the real channel
108 */
109 if (pa->pa_function == 1) {
110 sc->sc_cy_compatchan = 0;
111 } else if (pa->pa_function == 2) {
112 sc->sc_cy_compatchan = 1;
113 } else {
114 aprint_error("%s: unexpected PCI function %d\n",
115 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, pa->pa_function);
116 return;
117 }
118 if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
119 aprint_normal("%s: bus-master DMA support present",
120 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
121 pciide_mapreg_dma(sc, pa);
122 } else {
123 aprint_normal("%s: hardware does not support DMA",
124 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
125 sc->sc_dma_ok = 0;
126 }
127 aprint_normal("\n");
128
129 sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
130 if (sc->sc_cy_handle == NULL) {
131 aprint_error("%s: unable to map hyperCache control registers\n",
132 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
133 sc->sc_dma_ok = 0;
134 }
135
136 sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
137 if (sc->sc_dma_ok) {
138 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
139 sc->sc_wdcdev.irqack = pciide_irqack;
140 }
141 sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
142 sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
143 sc->sc_wdcdev.sc_atac.atac_set_modes = cy693_setup_channel;
144
145 sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
146 sc->sc_wdcdev.sc_atac.atac_nchannels = 1;
147
148 wdc_allocate_regs(&sc->sc_wdcdev);
149
150 /* Only one channel for this chip; if we are here it's enabled */
151 cp = &sc->pciide_channels[0];
152 sc->wdc_chanarray[0] = &cp->ata_channel;
153 cp->name = PCIIDE_CHANNEL_NAME(0);
154 cp->ata_channel.ch_channel = 0;
155 cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
156 cp->ata_channel.ch_queue =
157 malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
158 if (cp->ata_channel.ch_queue == NULL) {
159 aprint_error("%s primary channel: "
160 "can't allocate memory for command queue",
161 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
162 return;
163 }
164 aprint_normal("%s: primary channel %s to ",
165 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname,
166 (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
167 "configured" : "wired");
168 if (interface & PCIIDE_INTERFACE_PCI(0)) {
169 aprint_normal("native-PCI mode\n");
170 pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
171 pciide_pci_intr);
172 } else {
173 aprint_normal("compatibility mode\n");
174 pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan, &cmdsize,
175 &ctlsize);
176 if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0)
177 pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan);
178 }
179 wdcattach(&cp->ata_channel);
180 }
181
182 static void
183 cy693_setup_channel(struct ata_channel *chp)
184 {
185 struct ata_drive_datas *drvp;
186 int drive;
187 u_int32_t cy_cmd_ctrl;
188 u_int32_t idedma_ctl;
189 struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
190 struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
191 int dma_mode = -1;
192
193 ATADEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
194 pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
195
196 cy_cmd_ctrl = idedma_ctl = 0;
197
198 /* setup DMA if needed */
199 pciide_channel_dma_setup(cp);
200
201 for (drive = 0; drive < 2; drive++) {
202 drvp = &chp->ch_drive[drive];
203 /* If no drive, skip */
204 if ((drvp->drive_flags & DRIVE) == 0)
205 continue;
206 /* add timing values, setup DMA if needed */
207 if (drvp->drive_flags & DRIVE_DMA) {
208 idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
209 /* use Multiword DMA */
210 if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
211 dma_mode = drvp->DMA_mode;
212 }
213 cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
214 CY_CMD_CTRL_IOW_PULSE_OFF(drive));
215 cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
216 CY_CMD_CTRL_IOW_REC_OFF(drive));
217 cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
218 CY_CMD_CTRL_IOR_PULSE_OFF(drive));
219 cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
220 CY_CMD_CTRL_IOR_REC_OFF(drive));
221 }
222 pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
223 chp->ch_drive[0].DMA_mode = dma_mode;
224 chp->ch_drive[1].DMA_mode = dma_mode;
225
226 if (dma_mode == -1)
227 dma_mode = 0;
228
229 if (sc->sc_cy_handle != NULL) {
230 /* Note: `multiple' is implied. */
231 cy82c693_write(sc->sc_cy_handle,
232 (sc->sc_cy_compatchan == 0) ?
233 CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
234 }
235
236 if (idedma_ctl != 0) {
237 /* Add software bits in status register */
238 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
239 idedma_ctl);
240 }
241 ATADEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
242 pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
243 }
244