Home | History | Annotate | Line # | Download | only in pci
cypide.c revision 1.28
      1 /*	$NetBSD: cypide.c,v 1.28 2012/07/26 20:49:49 jakllsch Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
      5  *
      6  * Redistribution and use in source and binary forms, with or without
      7  * modification, are permitted provided that the following conditions
      8  * are met:
      9  * 1. Redistributions of source code must retain the above copyright
     10  *    notice, this list of conditions and the following disclaimer.
     11  * 2. Redistributions in binary form must reproduce the above copyright
     12  *    notice, this list of conditions and the following disclaimer in the
     13  *    documentation and/or other materials provided with the distribution.
     14  *
     15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     25  *
     26  */
     27 
     28 #include <sys/cdefs.h>
     29 __KERNEL_RCSID(0, "$NetBSD: cypide.c,v 1.28 2012/07/26 20:49:49 jakllsch Exp $");
     30 
     31 #include <sys/param.h>
     32 #include <sys/systm.h>
     33 #include <sys/malloc.h>
     34 
     35 #include <dev/pci/pcivar.h>
     36 #include <dev/pci/pcidevs.h>
     37 #include <dev/pci/pciidereg.h>
     38 #include <dev/pci/pciidevar.h>
     39 #include <dev/pci/pciide_cy693_reg.h>
     40 #include <dev/pci/cy82c693var.h>
     41 
     42 static void cy693_chip_map(struct pciide_softc*, const struct pci_attach_args*);
     43 static void cy693_setup_channel(struct ata_channel*);
     44 
     45 static int  cypide_match(device_t, cfdata_t, void *);
     46 static void cypide_attach(device_t, device_t, void *);
     47 
     48 CFATTACH_DECL_NEW(cypide, sizeof(struct pciide_softc),
     49     cypide_match, cypide_attach, NULL, NULL);
     50 
     51 static const struct pciide_product_desc pciide_cypress_products[] =  {
     52 	{ PCI_PRODUCT_CONTAQ_82C693,
     53 	  IDE_16BIT_IOSPACE,
     54 	  "Cypress 82C693 IDE Controller",
     55 	  cy693_chip_map,
     56 	},
     57 	{ 0,
     58 	  0,
     59 	  NULL,
     60 	  NULL
     61 	}
     62 };
     63 
     64 static int
     65 cypide_match(device_t parent, cfdata_t match, void *aux)
     66 {
     67 	struct pci_attach_args *pa = aux;
     68 
     69 	if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CONTAQ &&
     70 	    PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
     71 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
     72 		if (pciide_lookup_product(pa->pa_id, pciide_cypress_products))
     73 			return (2);
     74 	}
     75 	return (0);
     76 }
     77 
     78 static void
     79 cypide_attach(device_t parent, device_t self, void *aux)
     80 {
     81 	struct pci_attach_args *pa = aux;
     82 	struct pciide_softc *sc = device_private(self);
     83 
     84 	sc->sc_wdcdev.sc_atac.atac_dev = self;
     85 
     86 	pciide_common_attach(sc, pa,
     87 	    pciide_lookup_product(pa->pa_id, pciide_cypress_products));
     88 
     89 }
     90 
     91 static void
     92 cy693_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
     93 {
     94 	struct pciide_channel *cp;
     95 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
     96 
     97 	if (pciide_chipen(sc, pa) == 0)
     98 		return;
     99 
    100 	/*
    101 	 * this chip has 2 PCI IDE functions, one for primary and one for
    102 	 * secondary. So we need to call pciide_mapregs_compat() with
    103 	 * the real channel
    104 	 */
    105 	if (pa->pa_function == 1) {
    106 		sc->sc_cy_compatchan = 0;
    107 	} else if (pa->pa_function == 2) {
    108 		sc->sc_cy_compatchan = 1;
    109 	} else {
    110 		aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    111 		    "unexpected PCI function %d\n", pa->pa_function);
    112 		return;
    113 	}
    114 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
    115 		aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    116 		    "bus-master DMA support present\n");
    117 		pciide_mapreg_dma(sc, pa);
    118 	} else {
    119 		aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    120 		    "hardware does not support DMA\n");
    121 		sc->sc_dma_ok = 0;
    122 	}
    123 
    124 	sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
    125 	if (sc->sc_cy_handle == NULL) {
    126 		aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    127 		    "unable to map hyperCache control registers\n");
    128 		sc->sc_dma_ok = 0;
    129 	}
    130 
    131 	sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
    132 	if (sc->sc_dma_ok) {
    133 		sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
    134 		sc->sc_wdcdev.irqack = pciide_irqack;
    135 	}
    136 	sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
    137 	sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
    138 	sc->sc_wdcdev.sc_atac.atac_set_modes = cy693_setup_channel;
    139 
    140 	sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
    141 	sc->sc_wdcdev.sc_atac.atac_nchannels = 1;
    142 
    143 	wdc_allocate_regs(&sc->sc_wdcdev);
    144 
    145 	/* Only one channel for this chip; if we are here it's enabled */
    146 	cp = &sc->pciide_channels[0];
    147 	sc->wdc_chanarray[0] = &cp->ata_channel;
    148 	cp->name = PCIIDE_CHANNEL_NAME(0);
    149 	cp->ata_channel.ch_channel = 0;
    150 	cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
    151 	cp->ata_channel.ch_queue =
    152 	    malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
    153 	cp->ata_channel.ch_ndrive = 2;
    154 	if (cp->ata_channel.ch_queue == NULL) {
    155 		aprint_error("%s primary channel: "
    156 		    "can't allocate memory for command queue",
    157 		    device_xname(sc->sc_wdcdev.sc_atac.atac_dev));
    158 		return;
    159 	}
    160 	aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
    161 	    "primary channel %s to ",
    162 	    (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
    163 	    "configured" : "wired");
    164 	if (interface & PCIIDE_INTERFACE_PCI(0)) {
    165 		aprint_normal("native-PCI mode\n");
    166 		pciide_mapregs_native(pa, cp, pciide_pci_intr);
    167 	} else {
    168 		aprint_normal("compatibility mode\n");
    169 		pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan);
    170 		if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0)
    171 			pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan);
    172 	}
    173 	wdcattach(&cp->ata_channel);
    174 }
    175 
    176 static void
    177 cy693_setup_channel(struct ata_channel *chp)
    178 {
    179 	struct ata_drive_datas *drvp;
    180 	int drive;
    181 	u_int32_t cy_cmd_ctrl;
    182 	u_int32_t idedma_ctl;
    183 	struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
    184 	struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
    185 	int dma_mode = -1;
    186 
    187 	ATADEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
    188 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
    189 
    190 	cy_cmd_ctrl = idedma_ctl = 0;
    191 
    192 	/* setup DMA if needed */
    193 	pciide_channel_dma_setup(cp);
    194 
    195 	for (drive = 0; drive < 2; drive++) {
    196 		drvp = &chp->ch_drive[drive];
    197 		/* If no drive, skip */
    198 		if ((drvp->drive_flags & DRIVE) == 0)
    199 			continue;
    200 		/* add timing values, setup DMA if needed */
    201 		if (drvp->drive_flags & DRIVE_DMA) {
    202 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
    203 			/* use Multiword DMA */
    204 			if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
    205 				dma_mode = drvp->DMA_mode;
    206 		}
    207 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
    208 		    CY_CMD_CTRL_IOW_PULSE_OFF(drive));
    209 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
    210 		    CY_CMD_CTRL_IOW_REC_OFF(drive));
    211 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
    212 		    CY_CMD_CTRL_IOR_PULSE_OFF(drive));
    213 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
    214 		    CY_CMD_CTRL_IOR_REC_OFF(drive));
    215 	}
    216 	pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
    217 	chp->ch_drive[0].DMA_mode = dma_mode;
    218 	chp->ch_drive[1].DMA_mode = dma_mode;
    219 
    220 	if (dma_mode == -1)
    221 		dma_mode = 0;
    222 
    223 	if (sc->sc_cy_handle != NULL) {
    224 		/* Note: `multiple' is implied. */
    225 		cy82c693_write(sc->sc_cy_handle,
    226 		    (sc->sc_cy_compatchan == 0) ?
    227 		    CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
    228 	}
    229 
    230 	if (idedma_ctl != 0) {
    231 		/* Add software bits in status register */
    232 		bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
    233 		    idedma_ctl);
    234 	}
    235 	ATADEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
    236 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
    237 }
    238