geodeide.c revision 1.9
1 /* $NetBSD: geodeide.c,v 1.9 2005/06/25 05:04:01 fair Exp $ */ 2 3 /* 4 * Copyright (c) 2004 Manuel Bouyer. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Manuel Bouyer. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 * 31 */ 32 33 /* 34 * Driver for the IDE part of the AMD Geode CS5530A companion chip 35 * and AMD Geode SC1100. 36 * Docs available from AMD's web site 37 */ 38 39 #include <sys/cdefs.h> 40 __KERNEL_RCSID(0, "$NetBSD: geodeide.c,v 1.9 2005/06/25 05:04:01 fair Exp $"); 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 45 #include <uvm/uvm_extern.h> 46 47 #include <dev/pci/pcivar.h> 48 #include <dev/pci/pcidevs.h> 49 #include <dev/pci/pciidereg.h> 50 #include <dev/pci/pciidevar.h> 51 52 #include <dev/pci/pciide_geode_reg.h> 53 54 static void geodeide_chip_map(struct pciide_softc *, 55 struct pci_attach_args *); 56 static void geodeide_setup_channel(struct ata_channel *); 57 58 static int geodeide_match(struct device *, struct cfdata *, void *); 59 static void geodeide_attach(struct device *, struct device *, void *); 60 61 CFATTACH_DECL(geodeide, sizeof(struct pciide_softc), 62 geodeide_match, geodeide_attach, NULL, NULL); 63 64 static const struct pciide_product_desc pciide_geode_products[] = { 65 { PCI_PRODUCT_CYRIX_CX5530_IDE, 66 0, 67 "AMD Geode CX5530 IDE controller", 68 geodeide_chip_map, 69 }, 70 { PCI_PRODUCT_NS_SC1100_IDE, 71 0, 72 "AMD Geode SC1100 IDE controller", 73 geodeide_chip_map, 74 }, 75 { 0, 76 0, 77 NULL, 78 NULL, 79 }, 80 }; 81 82 static int 83 geodeide_match(struct device *parent, struct cfdata *match, void *aux) 84 { 85 struct pci_attach_args *pa = aux; 86 87 if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CYRIX || 88 PCI_VENDOR(pa->pa_id) == PCI_VENDOR_NS) && 89 PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE && 90 PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE && 91 pciide_lookup_product(pa->pa_id, pciide_geode_products)) 92 return(2); 93 return (0); 94 } 95 96 static void 97 geodeide_attach(struct device *parent, struct device *self, void *aux) 98 { 99 struct pci_attach_args *pa = aux; 100 struct pciide_softc *sc = (void *)self; 101 102 pciide_common_attach(sc, pa, 103 pciide_lookup_product(pa->pa_id, pciide_geode_products)); 104 } 105 106 static void 107 geodeide_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa) 108 { 109 struct pciide_channel *cp; 110 int channel; 111 bus_size_t cmdsize, ctlsize; 112 113 if (pciide_chipen(sc, pa) == 0) 114 return; 115 116 aprint_normal("%s: bus-master DMA support present", 117 sc->sc_wdcdev.sc_atac.atac_dev.dv_xname); 118 pciide_mapreg_dma(sc, pa); 119 aprint_normal("\n"); 120 if (sc->sc_dma_ok) { 121 sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DMA | ATAC_CAP_UDMA; 122 sc->sc_wdcdev.irqack = pciide_irqack; 123 } 124 sc->sc_wdcdev.sc_atac.atac_pio_cap = 4; 125 sc->sc_wdcdev.sc_atac.atac_dma_cap = 2; 126 sc->sc_wdcdev.sc_atac.atac_udma_cap = 2; 127 /* 128 * The 5530 is utterly swamped by UDMA mode 2, so limit to mode 1 129 * so that the chip is able to perform the other functions it has 130 * while IDE UDMA is going on. 131 */ 132 if (sc->sc_pp->ide_product == PCI_PRODUCT_CYRIX_CX5530_IDE) { 133 sc->sc_wdcdev.sc_atac.atac_udma_cap = 1; 134 } 135 sc->sc_wdcdev.sc_atac.atac_set_modes = geodeide_setup_channel; 136 sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray; 137 sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS; 138 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16 | ATAC_CAP_DATA32; 139 140 /* 141 * Soekris Engineering Issue #0003: 142 * "The SC1100 built in busmaster IDE controller is pretty 143 * standard, but have two bugs: data transfers need to be 144 * dword aligned and it cannot do an exact 64Kbyte data 145 * transfer." 146 */ 147 if (sc->sc_pp->ide_product == PCI_PRODUCT_NS_SC1100_IDE) { 148 if (sc->sc_dma_boundary == 0x10000) 149 sc->sc_dma_boundary -= PAGE_SIZE; 150 151 if (sc->sc_dma_maxsegsz == 0x10000) 152 sc->sc_dma_maxsegsz -= PAGE_SIZE; 153 } 154 155 wdc_allocate_regs(&sc->sc_wdcdev); 156 157 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels; 158 channel++) { 159 cp = &sc->pciide_channels[channel]; 160 /* controller is compat-only */ 161 if (pciide_chansetup(sc, channel, 0) == 0) 162 continue; 163 pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr); 164 } 165 } 166 167 static void 168 geodeide_setup_channel(struct ata_channel *chp) 169 { 170 struct ata_drive_datas *drvp; 171 struct pciide_channel *cp = CHAN_TO_PCHAN(chp); 172 struct pciide_softc *sc = CHAN_TO_PCIIDE(chp); 173 int channel = chp->ch_channel; 174 int drive, s; 175 u_int32_t dma_timing; 176 u_int8_t idedma_ctl; 177 const int32_t *geode_pio; 178 const int32_t *geode_dma; 179 const int32_t *geode_udma; 180 bus_size_t dmaoff, piooff; 181 182 switch (sc->sc_pp->ide_product) { 183 case PCI_PRODUCT_CYRIX_CX5530_IDE: 184 geode_pio = geode_cs5530_pio; 185 geode_dma = geode_cs5530_dma; 186 geode_udma = geode_cs5530_udma; 187 break; 188 189 case PCI_PRODUCT_NS_SC1100_IDE: 190 default: /* XXX gcc */ 191 geode_pio = geode_sc1100_pio; 192 geode_dma = geode_sc1100_dma; 193 geode_udma = geode_sc1100_udma; 194 break; 195 } 196 197 /* setup DMA if needed */ 198 pciide_channel_dma_setup(cp); 199 200 idedma_ctl = 0; 201 202 /* Per drive settings */ 203 for (drive = 0; drive < 2; drive++) { 204 drvp = &chp->ch_drive[drive]; 205 /* If no drive, skip */ 206 if ((drvp->drive_flags & DRIVE) == 0) 207 continue; 208 209 switch (sc->sc_pp->ide_product) { 210 case PCI_PRODUCT_CYRIX_CX5530_IDE: 211 dmaoff = CS5530_DMA_REG(channel, drive); 212 piooff = CS5530_PIO_REG(channel, drive); 213 dma_timing = CS5530_DMA_REG_PIO_FORMAT; 214 break; 215 216 case PCI_PRODUCT_NS_SC1100_IDE: 217 default: /* XXX gcc */ 218 dmaoff = SC1100_DMA_REG(channel, drive); 219 piooff = SC1100_PIO_REG(channel, drive); 220 dma_timing = 0; 221 break; 222 } 223 224 /* add timing values, setup DMA if needed */ 225 if (drvp->drive_flags & DRIVE_UDMA) { 226 /* Use Ultra-DMA */ 227 dma_timing |= geode_udma[drvp->UDMA_mode]; 228 idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); 229 } else if (drvp->drive_flags & DRIVE_DMA) { 230 /* use Multiword DMA */ 231 dma_timing |= geode_dma[drvp->DMA_mode]; 232 idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); 233 } else { 234 /* PIO only */ 235 s = splbio(); 236 drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA); 237 splx(s); 238 } 239 240 switch (sc->sc_pp->ide_product) { 241 case PCI_PRODUCT_CYRIX_CX5530_IDE: 242 bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, 243 dmaoff, dma_timing); 244 bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, 245 piooff, geode_pio[drvp->PIO_mode]); 246 break; 247 248 case PCI_PRODUCT_NS_SC1100_IDE: 249 pci_conf_write(sc->sc_pc, sc->sc_tag, dmaoff, 250 dma_timing); 251 pci_conf_write(sc->sc_pc, sc->sc_tag, piooff, 252 geode_pio[drvp->PIO_mode]); 253 break; 254 } 255 } 256 257 if (idedma_ctl != 0) { 258 /* Add software bits in status register */ 259 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0, 260 idedma_ctl); 261 } 262 } 263
Indexes created Thu Sep 25 16:09:42 GMT 2025