Home | History | Annotate | Line # | Download | only in pci
if_bgevar.h revision 1.1
      1 /*	$NetBSD: if_bgevar.h,v 1.1 2009/04/23 10:47:44 msaitoh Exp $	*/
      2 /*
      3  * Copyright (c) 2001 Wind River Systems
      4  * Copyright (c) 1997, 1998, 1999, 2001
      5  *	Bill Paul <wpaul (at) windriver.com>.  All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  * 3. All advertising materials mentioning features or use of this software
     16  *    must display the following acknowledgement:
     17  *	This product includes software developed by Bill Paul.
     18  * 4. Neither the name of the author nor the names of any co-contributors
     19  *    may be used to endorse or promote products derived from this software
     20  *    without specific prior written permission.
     21  *
     22  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
     23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     25  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
     26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
     32  * THE POSSIBILITY OF SUCH DAMAGE.
     33  *
     34  * $FreeBSD: if_bgereg.h,v 1.1.2.7 2002/11/02 18:17:55 mp Exp $
     35  */
     36 
     37 /*
     38  * BCM570x memory map. The internal memory layout varies somewhat
     39  * depending on whether or not we have external SSRAM attached.
     40  * The BCM5700 can have up to 16MB of external memory. The BCM5701
     41  * is apparently not designed to use external SSRAM. The mappings
     42  * up to the first 4 send rings are the same for both internal and
     43  * external memory configurations. Note that mini RX ring space is
     44  * only available with external SSRAM configurations, which means
     45  * the mini RX ring is not supported on the BCM5701.
     46  *
     47  * The NIC's memory can be accessed by the host in one of 3 ways:
     48  *
     49  * 1) Indirect register access. The MEMWIN_BASEADDR and MEMWIN_DATA
     50  *    registers in PCI config space can be used to read any 32-bit
     51  *    address within the NIC's memory.
     52  *
     53  * 2) Memory window access. The MEMWIN_BASEADDR register in PCI config
     54  *    space can be used in conjunction with the memory window in the
     55  *    device register space at offset 0x8000 to read any 32K chunk
     56  *    of NIC memory.
     57  *
     58  * 3) Flat mode. If the 'flat mode' bit in the PCI state register is
     59  *    set, the device I/O mapping consumes 32MB of host address space,
     60  *    allowing all of the registers and internal NIC memory to be
     61  *    accessed directly. NIC memory addresses are offset by 0x01000000.
     62  *    Flat mode consumes so much host address space that it is not
     63  *    recommended.
     64  */
     65 
     66 #ifndef _DEV_PCI_IF_BGEVAR_H_
     67 #define _DEV_PCI_IF_BGEVAR_H_
     68 
     69 #include <machine/bus.h>
     70 #include <net/if_ether.h>
     71 #include <dev/pci/pcivar.h>
     72 
     73 static __inline void
     74 bge_set_hostaddr(volatile bge_hostaddr *x, bus_addr_t y)
     75 {
     76 	x->bge_addr_lo = y & 0xffffffff;
     77 	if (sizeof (bus_addr_t) == 8)
     78 		x->bge_addr_hi = (u_int64_t)y >> 32;
     79 	else
     80 		x->bge_addr_hi = 0;
     81 }
     82 
     83 #define RCB_WRITE_4(sc, rcb, offset, val) \
     84 	bus_space_write_4(sc->bge_btag, sc->bge_bhandle, \
     85 			  rcb + offsetof(struct bge_rcb, offset), val)
     86 
     87 /*
     88  * Other utility macros.
     89  */
     90 #define BGE_INC(x, y)	(x) = (x + 1) % y
     91 
     92 /*
     93  * Register access macros. The Tigon always uses memory mapped register
     94  * accesses and all registers must be accessed with 32 bit operations.
     95  */
     96 
     97 #define CSR_WRITE_4(sc, reg, val)	\
     98 	bus_space_write_4(sc->bge_btag, sc->bge_bhandle, reg, val)
     99 
    100 #define CSR_READ_4(sc, reg)		\
    101 	bus_space_read_4(sc->bge_btag, sc->bge_bhandle, reg)
    102 
    103 #define BGE_SETBIT(sc, reg, x)	\
    104 	CSR_WRITE_4(sc, reg, (CSR_READ_4(sc, reg) | x))
    105 #define BGE_CLRBIT(sc, reg, x)	\
    106 	CSR_WRITE_4(sc, reg, (CSR_READ_4(sc, reg) & ~x))
    107 
    108 #define PCI_SETBIT(pc, tag, reg, x)	\
    109 	pci_conf_write(pc, tag, reg, (pci_conf_read(pc, tag, reg) | x))
    110 #define PCI_CLRBIT(pc, tag, reg, x)	\
    111 	pci_conf_write(pc, tag, reg, (pci_conf_read(pc, tag, reg) & ~x))
    112 
    113 /*
    114  * Memory management stuff. Note: the SSLOTS, MSLOTS and JSLOTS
    115  * values are tuneable. They control the actual amount of buffers
    116  * allocated for the standard, mini and jumbo receive rings.
    117  */
    118 
    119 #define BGE_SSLOTS	256
    120 #define BGE_MSLOTS	256
    121 #define BGE_JSLOTS	384
    122 #define BGE_RSLOTS	256
    123 
    124 #define BGE_JRAWLEN (BGE_JUMBO_FRAMELEN + ETHER_ALIGN)
    125 #define BGE_JLEN (BGE_JRAWLEN + (sizeof(u_int64_t) - \
    126 	(BGE_JRAWLEN % sizeof(u_int64_t))))
    127 #define BGE_JPAGESZ PAGE_SIZE
    128 #define BGE_RESID (BGE_JPAGESZ - (BGE_JLEN * BGE_JSLOTS) % BGE_JPAGESZ)
    129 #define BGE_JMEM ((BGE_JLEN * BGE_JSLOTS) + BGE_RESID)
    130 
    131 /*
    132  * Ring structures. Most of these reside in host memory and we tell
    133  * the NIC where they are via the ring control blocks. The exceptions
    134  * are the tx and command rings, which live in NIC memory and which
    135  * we access via the shared memory window.
    136  */
    137 struct bge_ring_data {
    138 	struct bge_rx_bd	bge_rx_std_ring[BGE_STD_RX_RING_CNT];
    139 	struct bge_rx_bd	bge_rx_jumbo_ring[BGE_JUMBO_RX_RING_CNT];
    140 	struct bge_rx_bd	bge_rx_return_ring[BGE_RETURN_RING_CNT];
    141 	struct bge_tx_bd	bge_tx_ring[BGE_TX_RING_CNT];
    142 	struct bge_status_block	bge_status_block;
    143 	struct bge_tx_desc	*bge_tx_ring_nic;/* pointer to shared mem */
    144 	struct bge_cmd_desc	*bge_cmd_ring;	/* pointer to shared mem */
    145 	struct bge_gib		bge_info;
    146 };
    147 
    148 #define BGE_RING_DMA_ADDR(sc, offset) \
    149 	((sc)->bge_ring_map->dm_segs[0].ds_addr + \
    150 	offsetof(struct bge_ring_data, offset))
    151 
    152 /*
    153  * Number of DMA segments in a TxCB. Note that this is carefully
    154  * chosen to make the total struct size an even power of two. It's
    155  * critical that no TxCB be split across a page boundary since
    156  * no attempt is made to allocate physically contiguous memory.
    157  *
    158  */
    159 #if 0	/* pre-TSO values */
    160 #define BGE_TXDMA_MAX	ETHER_MAX_LEN_JUMBO
    161 #ifdef _LP64
    162 #define BGE_NTXSEG	30
    163 #else
    164 #define BGE_NTXSEG	31
    165 #endif
    166 #else	/* TSO values */
    167 #define BGE_TXDMA_MAX	(round_page(IP_MAXPACKET))	/* for TSO */
    168 #ifdef _LP64
    169 #define BGE_NTXSEG	120	/* XXX just a guess */
    170 #else
    171 #define BGE_NTXSEG	124	/* XXX just a guess */
    172 #endif
    173 #endif	/* TSO values */
    174 
    175 
    176 /*
    177  * Mbuf pointers. We need these to keep track of the virtual addresses
    178  * of our mbuf chains since we can only convert from physical to virtual,
    179  * not the other way around.
    180  */
    181 struct bge_chain_data {
    182 	struct mbuf		*bge_tx_chain[BGE_TX_RING_CNT];
    183 	struct mbuf		*bge_rx_std_chain[BGE_STD_RX_RING_CNT];
    184 	struct mbuf		*bge_rx_jumbo_chain[BGE_JUMBO_RX_RING_CNT];
    185 	struct mbuf		*bge_rx_mini_chain[BGE_MINI_RX_RING_CNT];
    186 	bus_dmamap_t		bge_rx_std_map[BGE_STD_RX_RING_CNT];
    187 	bus_dmamap_t		bge_rx_jumbo_map;
    188 	/* Stick the jumbo mem management stuff here too. */
    189 	void *			bge_jslots[BGE_JSLOTS];
    190 	void *			bge_jumbo_buf;
    191 };
    192 
    193 #define BGE_JUMBO_DMA_ADDR(sc, m) \
    194 	((sc)->bge_cdata.bge_rx_jumbo_map->dm_segs[0].ds_addr + \
    195 	 (mtod((m), char *) - (char *)(sc)->bge_cdata.bge_jumbo_buf))
    196 
    197 struct bge_type {
    198 	u_int16_t		bge_vid;
    199 	u_int16_t		bge_did;
    200 	char			*bge_name;
    201 };
    202 
    203 #define BGE_TIMEOUT		1000
    204 #define BGE_TXCONS_UNSET		0xFFFF	/* impossible value */
    205 
    206 struct bge_jpool_entry {
    207 	int				slot;
    208 	SLIST_ENTRY(bge_jpool_entry)	jpool_entries;
    209 };
    210 
    211 struct bge_bcom_hack {
    212 	int			reg;
    213 	int			val;
    214 };
    215 
    216 struct txdmamap_pool_entry {
    217 	bus_dmamap_t dmamap;
    218 	SLIST_ENTRY(txdmamap_pool_entry) link;
    219 };
    220 
    221 struct bge_softc {
    222 	device_t		bge_dev;
    223 	struct ethercom		ethercom;		/* interface info */
    224 	bus_space_handle_t	bge_bhandle;
    225 	bus_space_tag_t		bge_btag;
    226 	void			*bge_intrhand;
    227 	pci_chipset_tag_t	sc_pc;
    228 	pcitag_t		sc_pcitag;
    229 
    230 	struct mii_data		bge_mii;
    231 	struct ifmedia		bge_ifmedia;	/* media info */
    232 	u_int8_t		bge_extram;	/* has external SSRAM */
    233 	u_int32_t		bge_return_ring_cnt;
    234 	u_int32_t		bge_tx_prodidx;
    235 	bus_dma_tag_t		bge_dmatag;
    236 	u_int32_t		bge_chipid;
    237 	u_int32_t		bge_local_ctrl_reg;
    238 	struct bge_ring_data	*bge_rdata;	/* rings */
    239 	struct bge_chain_data	bge_cdata;	/* mbufs */
    240 	bus_dmamap_t		bge_ring_map;
    241 	u_int16_t		bge_tx_saved_considx;
    242 	u_int16_t		bge_rx_saved_considx;
    243 	u_int16_t		bge_ev_saved_considx;
    244 	u_int16_t		bge_std;	/* current std ring head */
    245 	u_int16_t		bge_jumbo;	/* current jumo ring head */
    246 	SLIST_HEAD(__bge_jfreehead, bge_jpool_entry)	bge_jfree_listhead;
    247 	SLIST_HEAD(__bge_jinusehead, bge_jpool_entry)	bge_jinuse_listhead;
    248 	u_int32_t		bge_stat_ticks;
    249 	u_int32_t		bge_rx_coal_ticks;
    250 	u_int32_t		bge_tx_coal_ticks;
    251 	u_int32_t		bge_rx_max_coal_bds;
    252 	u_int32_t		bge_tx_max_coal_bds;
    253 	u_int32_t		bge_tx_buf_ratio;
    254 	uint32_t		bge_sts;
    255 #define BGE_STS_LINK		0x00000001	/* MAC link status */
    256 #define BGE_STS_LINK_EVT	0x00000002	/* pending link event */
    257 #define BGE_STS_AUTOPOLL	0x00000004	/* PHY auto-polling  */
    258 #define BGE_STS_BIT(sc, x)	((sc)->bge_sts & (x))
    259 #define BGE_STS_SETBIT(sc, x)	((sc)->bge_sts |= (x))
    260 #define BGE_STS_CLRBIT(sc, x)	((sc)->bge_sts &= ~(x))
    261 	int			bge_if_flags;
    262 	uint32_t		bge_flags;
    263 	int			bge_flowflags;
    264 #ifdef BGE_EVENT_COUNTERS
    265 	/*
    266 	 * Event counters.
    267 	 */
    268 	struct evcnt bge_ev_intr;	/* interrupts */
    269 	struct evcnt bge_ev_tx_xoff;	/* send PAUSE(len>0) packets */
    270 	struct evcnt bge_ev_tx_xon;	/* send PAUSE(len=0) packets */
    271 	struct evcnt bge_ev_rx_xoff;	/* receive PAUSE(len>0) packets */
    272 	struct evcnt bge_ev_rx_xon;	/* receive PAUSE(len=0) packets */
    273 	struct evcnt bge_ev_rx_macctl;	/* receive MAC control packets */
    274 	struct evcnt bge_ev_xoffentered;/* XOFF state entered */
    275 #endif /* BGE_EVENT_COUNTERS */
    276 	int			bge_txcnt;
    277 	struct callout		bge_timeout;
    278 	char			*bge_vpd_prodname;
    279 	char			*bge_vpd_readonly;
    280 	int			bge_pending_rxintr_change;
    281 	SLIST_HEAD(, txdmamap_pool_entry) txdma_list;
    282 	struct txdmamap_pool_entry *txdma[BGE_TX_RING_CNT];
    283 
    284 #if NRND > 0
    285 	rndsource_element_t	rnd_source;	/* random source */
    286 #endif
    287 };
    288 
    289 #endif /* _DEV_PCI_IF_BGEVAR_H_ */
    290