if_iwn.c revision 1.63
1 /* $NetBSD: if_iwn.c,v 1.63 2013/03/30 03:21:05 christos Exp $ */ 2 /* $OpenBSD: if_iwn.c,v 1.96 2010/05/13 09:25:03 damien Exp $ */ 3 4 /*- 5 * Copyright (c) 2007-2010 Damien Bergamini <damien.bergamini (at) free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 /* 21 * Driver for Intel WiFi Link 4965 and 1000/5000/6000 Series 802.11 network 22 * adapters. 23 */ 24 #include <sys/cdefs.h> 25 __KERNEL_RCSID(0, "$NetBSD: if_iwn.c,v 1.63 2013/03/30 03:21:05 christos Exp $"); 26 27 #define IWN_USE_RBUF /* Use local storage for RX */ 28 #undef IWN_HWCRYPTO /* XXX does not even compile yet */ 29 30 #include <sys/param.h> 31 #include <sys/sockio.h> 32 #include <sys/proc.h> 33 #include <sys/mbuf.h> 34 #include <sys/kernel.h> 35 #include <sys/socket.h> 36 #include <sys/systm.h> 37 #include <sys/malloc.h> 38 #include <sys/mutex.h> 39 #include <sys/conf.h> 40 #include <sys/kauth.h> 41 #include <sys/callout.h> 42 43 #include <dev/sysmon/sysmonvar.h> 44 45 #include <sys/bus.h> 46 #include <machine/endian.h> 47 #include <machine/intr.h> 48 49 #include <dev/pci/pcireg.h> 50 #include <dev/pci/pcivar.h> 51 #include <dev/pci/pcidevs.h> 52 53 #include <net/bpf.h> 54 #include <net/if.h> 55 #include <net/if_arp.h> 56 #include <net/if_dl.h> 57 #include <net/if_media.h> 58 #include <net/if_types.h> 59 60 #include <netinet/in.h> 61 #include <netinet/in_systm.h> 62 #include <netinet/in_var.h> 63 #include <net/if_ether.h> 64 #include <netinet/ip.h> 65 66 #include <net80211/ieee80211_var.h> 67 #include <net80211/ieee80211_amrr.h> 68 #include <net80211/ieee80211_radiotap.h> 69 70 #include <dev/firmload.h> 71 72 #include <dev/pci/if_iwnreg.h> 73 #include <dev/pci/if_iwnvar.h> 74 75 static const pci_product_id_t iwn_devices[] = { 76 PCI_PRODUCT_INTEL_WIFI_LINK_1030_1, 77 PCI_PRODUCT_INTEL_WIFI_LINK_1030_2, 78 PCI_PRODUCT_INTEL_WIFI_LINK_4965_1, 79 PCI_PRODUCT_INTEL_WIFI_LINK_4965_2, 80 PCI_PRODUCT_INTEL_WIFI_LINK_4965_3, 81 PCI_PRODUCT_INTEL_WIFI_LINK_4965_4, 82 PCI_PRODUCT_INTEL_WIFI_LINK_5100_1, 83 PCI_PRODUCT_INTEL_WIFI_LINK_5100_2, 84 PCI_PRODUCT_INTEL_WIFI_LINK_5150_1, 85 PCI_PRODUCT_INTEL_WIFI_LINK_5150_2, 86 PCI_PRODUCT_INTEL_WIFI_LINK_5300_1, 87 PCI_PRODUCT_INTEL_WIFI_LINK_5300_2, 88 PCI_PRODUCT_INTEL_WIFI_LINK_5350_1, 89 PCI_PRODUCT_INTEL_WIFI_LINK_5350_2, 90 PCI_PRODUCT_INTEL_WIFI_LINK_1000_1, 91 PCI_PRODUCT_INTEL_WIFI_LINK_1000_2, 92 PCI_PRODUCT_INTEL_WIFI_LINK_6000_3X3_1, 93 PCI_PRODUCT_INTEL_WIFI_LINK_6000_3X3_2, 94 PCI_PRODUCT_INTEL_WIFI_LINK_6000_IPA_1, 95 PCI_PRODUCT_INTEL_WIFI_LINK_6000_IPA_2, 96 PCI_PRODUCT_INTEL_WIFI_LINK_6050_2X2_1, 97 PCI_PRODUCT_INTEL_WIFI_LINK_6050_2X2_2, 98 PCI_PRODUCT_INTEL_WIFI_LINK_6005_2X2_1, 99 PCI_PRODUCT_INTEL_WIFI_LINK_6005_2X2_2, 100 PCI_PRODUCT_INTEL_WIFI_LINK_6230_1, 101 PCI_PRODUCT_INTEL_WIFI_LINK_6230_2, 102 }; 103 104 /* 105 * Supported rates for 802.11a/b/g modes (in 500Kbps unit). 106 */ 107 static const struct ieee80211_rateset iwn_rateset_11a = 108 { 8, { 12, 18, 24, 36, 48, 72, 96, 108 } }; 109 110 static const struct ieee80211_rateset iwn_rateset_11b = 111 { 4, { 2, 4, 11, 22 } }; 112 113 static const struct ieee80211_rateset iwn_rateset_11g = 114 { 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } }; 115 116 static int iwn_match(device_t , struct cfdata *, void *); 117 static void iwn_attach(device_t , device_t , void *); 118 static int iwn4965_attach(struct iwn_softc *, pci_product_id_t); 119 static int iwn5000_attach(struct iwn_softc *, pci_product_id_t); 120 static void iwn_radiotap_attach(struct iwn_softc *); 121 static int iwn_detach(device_t , int); 122 #if 0 123 static void iwn_power(int, void *); 124 #endif 125 static bool iwn_resume(device_t, const pmf_qual_t *); 126 static int iwn_nic_lock(struct iwn_softc *); 127 static int iwn_eeprom_lock(struct iwn_softc *); 128 static int iwn_init_otprom(struct iwn_softc *); 129 static int iwn_read_prom_data(struct iwn_softc *, uint32_t, void *, int); 130 static int iwn_dma_contig_alloc(bus_dma_tag_t, struct iwn_dma_info *, 131 void **, bus_size_t, bus_size_t); 132 static void iwn_dma_contig_free(struct iwn_dma_info *); 133 static int iwn_alloc_sched(struct iwn_softc *); 134 static void iwn_free_sched(struct iwn_softc *); 135 static int iwn_alloc_kw(struct iwn_softc *); 136 static void iwn_free_kw(struct iwn_softc *); 137 static int iwn_alloc_ict(struct iwn_softc *); 138 static void iwn_free_ict(struct iwn_softc *); 139 static int iwn_alloc_fwmem(struct iwn_softc *); 140 static void iwn_free_fwmem(struct iwn_softc *); 141 static int iwn_alloc_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 142 static void iwn_reset_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 143 static void iwn_free_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 144 static int iwn_alloc_tx_ring(struct iwn_softc *, struct iwn_tx_ring *, 145 int); 146 static void iwn_reset_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 147 static void iwn_free_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 148 static void iwn5000_ict_reset(struct iwn_softc *); 149 static int iwn_read_eeprom(struct iwn_softc *); 150 static void iwn4965_read_eeprom(struct iwn_softc *); 151 152 #ifdef IWN_DEBUG 153 static void iwn4965_print_power_group(struct iwn_softc *, int); 154 #endif 155 static void iwn5000_read_eeprom(struct iwn_softc *); 156 static void iwn_read_eeprom_channels(struct iwn_softc *, int, uint32_t); 157 static void iwn_read_eeprom_enhinfo(struct iwn_softc *); 158 static struct ieee80211_node *iwn_node_alloc(struct ieee80211_node_table *); 159 static void iwn_newassoc(struct ieee80211_node *, int); 160 static int iwn_media_change(struct ifnet *); 161 static int iwn_newstate(struct ieee80211com *, enum ieee80211_state, int); 162 static void iwn_iter_func(void *, struct ieee80211_node *); 163 static void iwn_calib_timeout(void *); 164 static void iwn_rx_phy(struct iwn_softc *, struct iwn_rx_desc *, 165 struct iwn_rx_data *); 166 static void iwn_rx_done(struct iwn_softc *, struct iwn_rx_desc *, 167 struct iwn_rx_data *); 168 #ifndef IEEE80211_NO_HT 169 static void iwn_rx_compressed_ba(struct iwn_softc *, struct iwn_rx_desc *, 170 struct iwn_rx_data *); 171 #endif 172 static void iwn5000_rx_calib_results(struct iwn_softc *, 173 struct iwn_rx_desc *, struct iwn_rx_data *); 174 static void iwn_rx_statistics(struct iwn_softc *, struct iwn_rx_desc *, 175 struct iwn_rx_data *); 176 static void iwn4965_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 177 struct iwn_rx_data *); 178 static void iwn5000_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 179 struct iwn_rx_data *); 180 static void iwn_tx_done(struct iwn_softc *, struct iwn_rx_desc *, int, 181 uint8_t); 182 static void iwn_cmd_done(struct iwn_softc *, struct iwn_rx_desc *); 183 static void iwn_notif_intr(struct iwn_softc *); 184 static void iwn_wakeup_intr(struct iwn_softc *); 185 static void iwn_fatal_intr(struct iwn_softc *); 186 static int iwn_intr(void *); 187 static void iwn4965_update_sched(struct iwn_softc *, int, int, uint8_t, 188 uint16_t); 189 static void iwn5000_update_sched(struct iwn_softc *, int, int, uint8_t, 190 uint16_t); 191 #ifdef notyet 192 static void iwn5000_reset_sched(struct iwn_softc *, int, int); 193 #endif 194 static int iwn_tx(struct iwn_softc *, struct mbuf *, 195 struct ieee80211_node *, int); 196 static void iwn_start(struct ifnet *); 197 static void iwn_watchdog(struct ifnet *); 198 static int iwn_ioctl(struct ifnet *, u_long, void *); 199 static int iwn_cmd(struct iwn_softc *, int, const void *, int, int); 200 static int iwn4965_add_node(struct iwn_softc *, struct iwn_node_info *, 201 int); 202 static int iwn5000_add_node(struct iwn_softc *, struct iwn_node_info *, 203 int); 204 static int iwn_set_link_quality(struct iwn_softc *, 205 struct ieee80211_node *); 206 static int iwn_add_broadcast_node(struct iwn_softc *, int); 207 static void iwn_set_led(struct iwn_softc *, uint8_t, uint8_t, uint8_t); 208 static int iwn_set_critical_temp(struct iwn_softc *); 209 static int iwn_set_timing(struct iwn_softc *, struct ieee80211_node *); 210 static void iwn4965_power_calibration(struct iwn_softc *, int); 211 static int iwn4965_set_txpower(struct iwn_softc *, int); 212 static int iwn5000_set_txpower(struct iwn_softc *, int); 213 static int iwn4965_get_rssi(const struct iwn_rx_stat *); 214 static int iwn5000_get_rssi(const struct iwn_rx_stat *); 215 static int iwn_get_noise(const struct iwn_rx_general_stats *); 216 static int iwn4965_get_temperature(struct iwn_softc *); 217 static int iwn5000_get_temperature(struct iwn_softc *); 218 static int iwn_init_sensitivity(struct iwn_softc *); 219 static void iwn_collect_noise(struct iwn_softc *, 220 const struct iwn_rx_general_stats *); 221 static int iwn4965_init_gains(struct iwn_softc *); 222 static int iwn5000_init_gains(struct iwn_softc *); 223 static int iwn4965_set_gains(struct iwn_softc *); 224 static int iwn5000_set_gains(struct iwn_softc *); 225 static void iwn_tune_sensitivity(struct iwn_softc *, 226 const struct iwn_rx_stats *); 227 static int iwn_send_sensitivity(struct iwn_softc *); 228 static int iwn_set_pslevel(struct iwn_softc *, int, int, int); 229 static int iwn5000_runtime_calib(struct iwn_softc *); 230 static int iwn_config(struct iwn_softc *); 231 static int iwn_scan(struct iwn_softc *, uint16_t); 232 static int iwn_auth(struct iwn_softc *); 233 static int iwn_run(struct iwn_softc *); 234 #ifdef IWN_HWCRYPTO 235 static int iwn_set_key(struct ieee80211com *, struct ieee80211_node *, 236 struct ieee80211_key *); 237 static void iwn_delete_key(struct ieee80211com *, struct ieee80211_node *, 238 struct ieee80211_key *); 239 #endif 240 static int iwn_wme_update(struct ieee80211com *); 241 #ifndef IEEE80211_NO_HT 242 static int iwn_ampdu_rx_start(struct ieee80211com *, 243 struct ieee80211_node *, uint8_t); 244 static void iwn_ampdu_rx_stop(struct ieee80211com *, 245 struct ieee80211_node *, uint8_t); 246 static int iwn_ampdu_tx_start(struct ieee80211com *, 247 struct ieee80211_node *, uint8_t); 248 static void iwn_ampdu_tx_stop(struct ieee80211com *, 249 struct ieee80211_node *, uint8_t); 250 static void iwn4965_ampdu_tx_start(struct iwn_softc *, 251 struct ieee80211_node *, uint8_t, uint16_t); 252 static void iwn4965_ampdu_tx_stop(struct iwn_softc *, 253 uint8_t, uint16_t); 254 static void iwn5000_ampdu_tx_start(struct iwn_softc *, 255 struct ieee80211_node *, uint8_t, uint16_t); 256 static void iwn5000_ampdu_tx_stop(struct iwn_softc *, 257 uint8_t, uint16_t); 258 #endif 259 static int iwn5000_query_calibration(struct iwn_softc *); 260 static int iwn5000_send_calibration(struct iwn_softc *); 261 static int iwn5000_send_wimax_coex(struct iwn_softc *); 262 static int iwn4965_post_alive(struct iwn_softc *); 263 static int iwn5000_post_alive(struct iwn_softc *); 264 static int iwn4965_load_bootcode(struct iwn_softc *, const uint8_t *, 265 int); 266 static int iwn4965_load_firmware(struct iwn_softc *); 267 static int iwn5000_load_firmware_section(struct iwn_softc *, uint32_t, 268 const uint8_t *, int); 269 static int iwn5000_load_firmware(struct iwn_softc *); 270 static int iwn_read_firmware_leg(struct iwn_softc *, 271 struct iwn_fw_info *); 272 static int iwn_read_firmware_tlv(struct iwn_softc *, 273 struct iwn_fw_info *, uint16_t); 274 static int iwn_read_firmware(struct iwn_softc *); 275 static int iwn_clock_wait(struct iwn_softc *); 276 static int iwn_apm_init(struct iwn_softc *); 277 static void iwn_apm_stop_master(struct iwn_softc *); 278 static void iwn_apm_stop(struct iwn_softc *); 279 static int iwn4965_nic_config(struct iwn_softc *); 280 static int iwn5000_nic_config(struct iwn_softc *); 281 static int iwn_hw_prepare(struct iwn_softc *); 282 static int iwn_hw_init(struct iwn_softc *); 283 static void iwn_hw_stop(struct iwn_softc *); 284 static int iwn_init(struct ifnet *); 285 static void iwn_stop(struct ifnet *, int); 286 287 /* XXX MCLGETI alternative */ 288 static struct mbuf *MCLGETIalt(struct iwn_softc *, int, 289 struct ifnet *, u_int); 290 #ifdef IWN_USE_RBUF 291 static struct iwn_rbuf *iwn_alloc_rbuf(struct iwn_softc *); 292 static void iwn_free_rbuf(struct mbuf *, void *, size_t, void *); 293 static int iwn_alloc_rpool(struct iwn_softc *); 294 static void iwn_free_rpool(struct iwn_softc *); 295 #endif 296 297 /* XXX needed by iwn_scan */ 298 static u_int8_t *ieee80211_add_ssid(u_int8_t *, const u_int8_t *, u_int); 299 static u_int8_t *ieee80211_add_rates(u_int8_t *, 300 const struct ieee80211_rateset *); 301 static u_int8_t *ieee80211_add_xrates(u_int8_t *, 302 const struct ieee80211_rateset *); 303 304 static void iwn_fix_channel(struct ieee80211com *, struct mbuf *); 305 306 #ifdef IWN_DEBUG 307 #define DPRINTF(x) do { if (iwn_debug > 0) printf x; } while (0) 308 #define DPRINTFN(n, x) do { if (iwn_debug >= (n)) printf x; } while (0) 309 int iwn_debug = 0; 310 #else 311 #define DPRINTF(x) 312 #define DPRINTFN(n, x) 313 #endif 314 315 CFATTACH_DECL_NEW(iwn, sizeof(struct iwn_softc), iwn_match, iwn_attach, 316 iwn_detach, NULL); 317 318 static int 319 iwn_match(device_t parent, cfdata_t match __unused, void *aux) 320 { 321 struct pci_attach_args *pa = aux; 322 size_t i; 323 324 if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_INTEL) 325 return 0; 326 327 for (i = 0; i < __arraycount(iwn_devices); i++) 328 if (PCI_PRODUCT(pa->pa_id) == iwn_devices[i]) 329 return 1; 330 331 return 0; 332 } 333 334 static void 335 iwn_attach(device_t parent __unused, device_t self, void *aux) 336 { 337 struct iwn_softc *sc = device_private(self); 338 struct ieee80211com *ic = &sc->sc_ic; 339 struct ifnet *ifp = &sc->sc_ec.ec_if; 340 struct pci_attach_args *pa = aux; 341 const char *intrstr; 342 pci_intr_handle_t ih; 343 pcireg_t memtype, reg; 344 int i, error; 345 346 sc->sc_dev = self; 347 sc->sc_pct = pa->pa_pc; 348 sc->sc_pcitag = pa->pa_tag; 349 sc->sc_dmat = pa->pa_dmat; 350 mutex_init(&sc->sc_mtx, MUTEX_DEFAULT, IPL_NONE); 351 352 callout_init(&sc->calib_to, 0); 353 callout_setfunc(&sc->calib_to, iwn_calib_timeout, sc); 354 355 pci_aprint_devinfo(pa, NULL); 356 357 /* 358 * Get the offset of the PCI Express Capability Structure in PCI 359 * Configuration Space. 360 */ 361 error = pci_get_capability(sc->sc_pct, sc->sc_pcitag, 362 PCI_CAP_PCIEXPRESS, &sc->sc_cap_off, NULL); 363 if (error == 0) { 364 aprint_error(": PCIe capability structure not found!\n"); 365 return; 366 } 367 368 /* Clear device-specific "PCI retry timeout" register (41h). */ 369 reg = pci_conf_read(sc->sc_pct, sc->sc_pcitag, 0x40); 370 if (reg & 0xff00) 371 pci_conf_write(sc->sc_pct, sc->sc_pcitag, 0x40, reg & ~0xff00); 372 373 /* Enable bus-mastering and hardware bug workaround. */ 374 /* XXX verify the bus-mastering is really needed (not in OpenBSD) */ 375 reg = pci_conf_read(sc->sc_pct, sc->sc_pcitag, PCI_COMMAND_STATUS_REG); 376 reg |= PCI_COMMAND_MASTER_ENABLE; 377 if (reg & PCI_COMMAND_INTERRUPT_DISABLE) { 378 DPRINTF(("PCIe INTx Disable set\n")); 379 reg &= ~PCI_COMMAND_INTERRUPT_DISABLE; 380 } 381 pci_conf_write(sc->sc_pct, sc->sc_pcitag, PCI_COMMAND_STATUS_REG, reg); 382 383 memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, IWN_PCI_BAR0); 384 error = pci_mapreg_map(pa, IWN_PCI_BAR0, memtype, 0, &sc->sc_st, 385 &sc->sc_sh, NULL, &sc->sc_sz); 386 if (error != 0) { 387 aprint_error(": can't map mem space\n"); 388 return; 389 } 390 391 /* Install interrupt handler. */ 392 if (pci_intr_map(pa, &ih) != 0) { 393 aprint_error(": can't map interrupt\n"); 394 return; 395 } 396 intrstr = pci_intr_string(sc->sc_pct, ih); 397 sc->sc_ih = pci_intr_establish(sc->sc_pct, ih, IPL_NET, iwn_intr, sc); 398 if (sc->sc_ih == NULL) { 399 aprint_error(": can't establish interrupt"); 400 if (intrstr != NULL) 401 aprint_error(" at %s", intrstr); 402 aprint_error("\n"); 403 return; 404 } 405 aprint_normal_dev(self, "interrupting at %s\n", intrstr); 406 407 /* Read hardware revision and attach. */ 408 sc->hw_type = (IWN_READ(sc, IWN_HW_REV) >> 4) & 0xf; 409 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 410 error = iwn4965_attach(sc, PCI_PRODUCT(pa->pa_id)); 411 else 412 error = iwn5000_attach(sc, PCI_PRODUCT(pa->pa_id)); 413 if (error != 0) { 414 aprint_error(": could not attach device\n"); 415 return; 416 } 417 418 if ((error = iwn_hw_prepare(sc)) != 0) { 419 aprint_error(": hardware not ready\n"); 420 return; 421 } 422 423 /* Read MAC address, channels, etc from EEPROM. */ 424 if ((error = iwn_read_eeprom(sc)) != 0) { 425 aprint_error(": could not read EEPROM\n"); 426 return; 427 } 428 429 /* Allocate DMA memory for firmware transfers. */ 430 if ((error = iwn_alloc_fwmem(sc)) != 0) { 431 aprint_error(": could not allocate memory for firmware\n"); 432 return; 433 } 434 435 /* Allocate "Keep Warm" page. */ 436 if ((error = iwn_alloc_kw(sc)) != 0) { 437 aprint_error(": could not allocate keep warm page\n"); 438 goto fail1; 439 } 440 441 /* Allocate ICT table for 5000 Series. */ 442 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 443 (error = iwn_alloc_ict(sc)) != 0) { 444 aprint_error(": could not allocate ICT table\n"); 445 goto fail2; 446 } 447 448 /* Allocate TX scheduler "rings". */ 449 if ((error = iwn_alloc_sched(sc)) != 0) { 450 aprint_error(": could not allocate TX scheduler rings\n"); 451 goto fail3; 452 } 453 454 #ifdef IWN_USE_RBUF 455 /* Allocate RX buffers. */ 456 if ((error = iwn_alloc_rpool(sc)) != 0) { 457 aprint_error_dev(self, "could not allocate RX buffers\n"); 458 goto fail3; 459 } 460 #endif 461 462 /* Allocate TX rings (16 on 4965AGN, 20 on >=5000). */ 463 for (i = 0; i < sc->ntxqs; i++) { 464 if ((error = iwn_alloc_tx_ring(sc, &sc->txq[i], i)) != 0) { 465 aprint_error(": could not allocate TX ring %d\n", i); 466 goto fail4; 467 } 468 } 469 470 /* Allocate RX ring. */ 471 if ((error = iwn_alloc_rx_ring(sc, &sc->rxq)) != 0) { 472 aprint_error(": could not allocate RX ring\n"); 473 goto fail4; 474 } 475 476 /* Clear pending interrupts. */ 477 IWN_WRITE(sc, IWN_INT, 0xffffffff); 478 479 /* Count the number of available chains. */ 480 sc->ntxchains = 481 ((sc->txchainmask >> 2) & 1) + 482 ((sc->txchainmask >> 1) & 1) + 483 ((sc->txchainmask >> 0) & 1); 484 sc->nrxchains = 485 ((sc->rxchainmask >> 2) & 1) + 486 ((sc->rxchainmask >> 1) & 1) + 487 ((sc->rxchainmask >> 0) & 1); 488 aprint_normal_dev(self, "MIMO %dT%dR, %.4s, address %s\n", 489 sc->ntxchains, sc->nrxchains, sc->eeprom_domain, 490 ether_sprintf(ic->ic_myaddr)); 491 492 ic->ic_ifp = ifp; 493 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 494 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 495 ic->ic_state = IEEE80211_S_INIT; 496 497 /* Set device capabilities. */ 498 /* XXX OpenBSD has IEEE80211_C_WEP, IEEE80211_C_RSN, 499 * and IEEE80211_C_PMGT too. */ 500 ic->ic_caps = 501 IEEE80211_C_IBSS | /* IBSS mode support */ 502 IEEE80211_C_WPA | /* 802.11i */ 503 IEEE80211_C_MONITOR | /* monitor mode supported */ 504 IEEE80211_C_TXPMGT | /* tx power management */ 505 IEEE80211_C_SHSLOT | /* short slot time supported */ 506 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 507 IEEE80211_C_WME; /* 802.11e */ 508 509 #ifndef IEEE80211_NO_HT 510 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 511 /* Set HT capabilities. */ 512 ic->ic_htcaps = 513 #if IWN_RBUF_SIZE == 8192 514 IEEE80211_HTCAP_AMSDU7935 | 515 #endif 516 IEEE80211_HTCAP_CBW20_40 | 517 IEEE80211_HTCAP_SGI20 | 518 IEEE80211_HTCAP_SGI40; 519 if (sc->hw_type != IWN_HW_REV_TYPE_4965) 520 ic->ic_htcaps |= IEEE80211_HTCAP_GF; 521 if (sc->hw_type == IWN_HW_REV_TYPE_6050) 522 ic->ic_htcaps |= IEEE80211_HTCAP_SMPS_DYN; 523 else 524 ic->ic_htcaps |= IEEE80211_HTCAP_SMPS_DIS; 525 } 526 #endif /* !IEEE80211_NO_HT */ 527 528 /* Set supported legacy rates. */ 529 ic->ic_sup_rates[IEEE80211_MODE_11B] = iwn_rateset_11b; 530 ic->ic_sup_rates[IEEE80211_MODE_11G] = iwn_rateset_11g; 531 if (sc->sc_flags & IWN_FLAG_HAS_5GHZ) { 532 ic->ic_sup_rates[IEEE80211_MODE_11A] = iwn_rateset_11a; 533 } 534 #ifndef IEEE80211_NO_HT 535 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 536 /* Set supported HT rates. */ 537 ic->ic_sup_mcs[0] = 0xff; /* MCS 0-7 */ 538 if (sc->nrxchains > 1) 539 ic->ic_sup_mcs[1] = 0xff; /* MCS 7-15 */ 540 if (sc->nrxchains > 2) 541 ic->ic_sup_mcs[2] = 0xff; /* MCS 16-23 */ 542 } 543 #endif 544 545 /* IBSS channel undefined for now. */ 546 ic->ic_ibss_chan = &ic->ic_channels[0]; 547 548 ifp->if_softc = sc; 549 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 550 ifp->if_init = iwn_init; 551 ifp->if_ioctl = iwn_ioctl; 552 ifp->if_start = iwn_start; 553 ifp->if_stop = iwn_stop; 554 ifp->if_watchdog = iwn_watchdog; 555 IFQ_SET_READY(&ifp->if_snd); 556 memcpy(ifp->if_xname, device_xname(self), IFNAMSIZ); 557 558 if_attach(ifp); 559 ieee80211_ifattach(ic); 560 ic->ic_node_alloc = iwn_node_alloc; 561 ic->ic_newassoc = iwn_newassoc; 562 #ifdef IWN_HWCRYPTO 563 ic->ic_crypto.cs_key_set = iwn_set_key; 564 ic->ic_crypto.cs_key_delete = iwn_delete_key; 565 #endif 566 ic->ic_wme.wme_update = iwn_wme_update; 567 #ifndef IEEE80211_NO_HT 568 ic->ic_ampdu_rx_start = iwn_ampdu_rx_start; 569 ic->ic_ampdu_rx_stop = iwn_ampdu_rx_stop; 570 ic->ic_ampdu_tx_start = iwn_ampdu_tx_start; 571 ic->ic_ampdu_tx_stop = iwn_ampdu_tx_stop; 572 #endif 573 574 /* Override 802.11 state transition machine. */ 575 sc->sc_newstate = ic->ic_newstate; 576 ic->ic_newstate = iwn_newstate; 577 ieee80211_media_init(ic, iwn_media_change, ieee80211_media_status); 578 579 sc->amrr.amrr_min_success_threshold = 1; 580 sc->amrr.amrr_max_success_threshold = 15; 581 582 iwn_radiotap_attach(sc); 583 584 /* 585 * XXX for NetBSD, OpenBSD timeout_set replaced by 586 * callout_init and callout_setfunc, above. 587 */ 588 589 if (pmf_device_register(self, NULL, iwn_resume)) 590 pmf_class_network_register(self, ifp); 591 else 592 aprint_error_dev(self, "couldn't establish power handler\n"); 593 594 /* XXX NetBSD add call to ieee80211_announce for dmesg. */ 595 ieee80211_announce(ic); 596 597 return; 598 599 /* Free allocated memory if something failed during attachment. */ 600 fail4: while (--i >= 0) 601 iwn_free_tx_ring(sc, &sc->txq[i]); 602 #ifdef IWN_USE_RBUF 603 iwn_free_rpool(sc); 604 #endif 605 iwn_free_sched(sc); 606 fail3: if (sc->ict != NULL) 607 iwn_free_ict(sc); 608 fail2: iwn_free_kw(sc); 609 fail1: iwn_free_fwmem(sc); 610 } 611 612 int 613 iwn4965_attach(struct iwn_softc *sc, pci_product_id_t pid) 614 { 615 struct iwn_ops *ops = &sc->ops; 616 617 ops->load_firmware = iwn4965_load_firmware; 618 ops->read_eeprom = iwn4965_read_eeprom; 619 ops->post_alive = iwn4965_post_alive; 620 ops->nic_config = iwn4965_nic_config; 621 ops->update_sched = iwn4965_update_sched; 622 ops->get_temperature = iwn4965_get_temperature; 623 ops->get_rssi = iwn4965_get_rssi; 624 ops->set_txpower = iwn4965_set_txpower; 625 ops->init_gains = iwn4965_init_gains; 626 ops->set_gains = iwn4965_set_gains; 627 ops->add_node = iwn4965_add_node; 628 ops->tx_done = iwn4965_tx_done; 629 #ifndef IEEE80211_NO_HT 630 ops->ampdu_tx_start = iwn4965_ampdu_tx_start; 631 ops->ampdu_tx_stop = iwn4965_ampdu_tx_stop; 632 #endif 633 sc->ntxqs = IWN4965_NTXQUEUES; 634 sc->ndmachnls = IWN4965_NDMACHNLS; 635 sc->broadcast_id = IWN4965_ID_BROADCAST; 636 sc->rxonsz = IWN4965_RXONSZ; 637 sc->schedsz = IWN4965_SCHEDSZ; 638 sc->fw_text_maxsz = IWN4965_FW_TEXT_MAXSZ; 639 sc->fw_data_maxsz = IWN4965_FW_DATA_MAXSZ; 640 sc->fwsz = IWN4965_FWSZ; 641 sc->sched_txfact_addr = IWN4965_SCHED_TXFACT; 642 sc->limits = &iwn4965_sensitivity_limits; 643 sc->fwname = "iwlwifi-4965-2.ucode"; 644 /* Override chains masks, ROM is known to be broken. */ 645 sc->txchainmask = IWN_ANT_AB; 646 sc->rxchainmask = IWN_ANT_ABC; 647 648 return 0; 649 } 650 651 int 652 iwn5000_attach(struct iwn_softc *sc, pci_product_id_t pid) 653 { 654 struct iwn_ops *ops = &sc->ops; 655 656 ops->load_firmware = iwn5000_load_firmware; 657 ops->read_eeprom = iwn5000_read_eeprom; 658 ops->post_alive = iwn5000_post_alive; 659 ops->nic_config = iwn5000_nic_config; 660 ops->update_sched = iwn5000_update_sched; 661 ops->get_temperature = iwn5000_get_temperature; 662 ops->get_rssi = iwn5000_get_rssi; 663 ops->set_txpower = iwn5000_set_txpower; 664 ops->init_gains = iwn5000_init_gains; 665 ops->set_gains = iwn5000_set_gains; 666 ops->add_node = iwn5000_add_node; 667 ops->tx_done = iwn5000_tx_done; 668 #ifndef IEEE80211_NO_HT 669 ops->ampdu_tx_start = iwn5000_ampdu_tx_start; 670 ops->ampdu_tx_stop = iwn5000_ampdu_tx_stop; 671 #endif 672 sc->ntxqs = IWN5000_NTXQUEUES; 673 sc->ndmachnls = IWN5000_NDMACHNLS; 674 sc->broadcast_id = IWN5000_ID_BROADCAST; 675 sc->rxonsz = IWN5000_RXONSZ; 676 sc->schedsz = IWN5000_SCHEDSZ; 677 sc->fw_text_maxsz = IWN5000_FW_TEXT_MAXSZ; 678 sc->fw_data_maxsz = IWN5000_FW_DATA_MAXSZ; 679 sc->fwsz = IWN5000_FWSZ; 680 sc->sched_txfact_addr = IWN5000_SCHED_TXFACT; 681 682 switch (sc->hw_type) { 683 case IWN_HW_REV_TYPE_5100: 684 sc->limits = &iwn5000_sensitivity_limits; 685 sc->fwname = "iwlwifi-5000-2.ucode"; 686 /* Override chains masks, ROM is known to be broken. */ 687 sc->txchainmask = IWN_ANT_B; 688 sc->rxchainmask = IWN_ANT_AB; 689 break; 690 case IWN_HW_REV_TYPE_5150: 691 sc->limits = &iwn5150_sensitivity_limits; 692 sc->fwname = "iwlwifi-5150-2.ucode"; 693 break; 694 case IWN_HW_REV_TYPE_5300: 695 case IWN_HW_REV_TYPE_5350: 696 sc->limits = &iwn5000_sensitivity_limits; 697 sc->fwname = "iwlwifi-5000-2.ucode"; 698 break; 699 case IWN_HW_REV_TYPE_1000: 700 sc->limits = &iwn1000_sensitivity_limits; 701 sc->fwname = "iwlwifi-1000-3.ucode"; 702 break; 703 case IWN_HW_REV_TYPE_6000: 704 sc->limits = &iwn6000_sensitivity_limits; 705 sc->fwname = "iwlwifi-6000-4.ucode"; 706 if (pid == PCI_PRODUCT_INTEL_WIFI_LINK_6000_IPA_1 || 707 pid == PCI_PRODUCT_INTEL_WIFI_LINK_6000_IPA_2) { 708 sc->sc_flags |= IWN_FLAG_INTERNAL_PA; 709 /* Override chains masks, ROM is known to be broken. */ 710 sc->txchainmask = IWN_ANT_BC; 711 sc->rxchainmask = IWN_ANT_BC; 712 } 713 break; 714 case IWN_HW_REV_TYPE_6050: 715 sc->limits = &iwn6000_sensitivity_limits; 716 sc->fwname = "iwlwifi-6050-5.ucode"; 717 break; 718 case IWN_HW_REV_TYPE_6005: 719 sc->limits = &iwn6000_sensitivity_limits; 720 sc->fwname = "iwlwifi-6000g2a-5.ucode"; 721 break; 722 default: 723 aprint_normal(": adapter type %d not supported\n", sc->hw_type); 724 return ENOTSUP; 725 } 726 return 0; 727 } 728 729 /* 730 * Attach the interface to 802.11 radiotap. 731 */ 732 static void 733 iwn_radiotap_attach(struct iwn_softc *sc) 734 { 735 struct ifnet *ifp = sc->sc_ic.ic_ifp; 736 737 bpf_attach2(ifp, DLT_IEEE802_11_RADIO, 738 sizeof (struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN, 739 &sc->sc_drvbpf); 740 741 sc->sc_rxtap_len = sizeof sc->sc_rxtapu; 742 sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); 743 sc->sc_rxtap.wr_ihdr.it_present = htole32(IWN_RX_RADIOTAP_PRESENT); 744 745 sc->sc_txtap_len = sizeof sc->sc_txtapu; 746 sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); 747 sc->sc_txtap.wt_ihdr.it_present = htole32(IWN_TX_RADIOTAP_PRESENT); 748 } 749 750 static int 751 iwn_detach(device_t self, int flags __unused) 752 { 753 struct iwn_softc *sc = device_private(self); 754 struct ifnet *ifp = sc->sc_ic.ic_ifp; 755 int qid; 756 757 callout_stop(&sc->calib_to); 758 759 /* Uninstall interrupt handler. */ 760 if (sc->sc_ih != NULL) 761 pci_intr_disestablish(sc->sc_pct, sc->sc_ih); 762 763 /* Free DMA resources. */ 764 iwn_free_rx_ring(sc, &sc->rxq); 765 for (qid = 0; qid < sc->ntxqs; qid++) 766 iwn_free_tx_ring(sc, &sc->txq[qid]); 767 #ifdef IWN_USE_RBUF 768 iwn_free_rpool(sc); 769 #endif 770 iwn_free_sched(sc); 771 iwn_free_kw(sc); 772 if (sc->ict != NULL) 773 iwn_free_ict(sc); 774 iwn_free_fwmem(sc); 775 776 bus_space_unmap(sc->sc_st, sc->sc_sh, sc->sc_sz); 777 778 ieee80211_ifdetach(&sc->sc_ic); 779 if_detach(ifp); 780 781 return 0; 782 } 783 784 #if 0 785 /* 786 * XXX Investigate if clearing the PCI retry timeout could eliminate 787 * the repeated scan calls. Also the calls to if_init and if_start 788 * are similar to the effect of adding the call to ifioctl_common . 789 */ 790 static void 791 iwn_power(int why, void *arg) 792 { 793 struct iwn_softc *sc = arg; 794 struct ifnet *ifp; 795 pcireg_t reg; 796 int s; 797 798 if (why != PWR_RESUME) 799 return; 800 801 /* Clear device-specific "PCI retry timeout" register (41h). */ 802 reg = pci_conf_read(sc->sc_pct, sc->sc_pcitag, 0x40); 803 if (reg & 0xff00) 804 pci_conf_write(sc->sc_pct, sc->sc_pcitag, 0x40, reg & ~0xff00); 805 806 s = splnet(); 807 ifp = &sc->sc_ic.ic_if; 808 if (ifp->if_flags & IFF_UP) { 809 ifp->if_init(ifp); 810 if (ifp->if_flags & IFF_RUNNING) 811 ifp->if_start(ifp); 812 } 813 splx(s); 814 } 815 #endif 816 817 static bool 818 iwn_resume(device_t dv, const pmf_qual_t *qual) 819 { 820 return true; 821 } 822 823 static int 824 iwn_nic_lock(struct iwn_softc *sc) 825 { 826 int ntries; 827 828 /* Request exclusive access to NIC. */ 829 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 830 831 /* Spin until we actually get the lock. */ 832 for (ntries = 0; ntries < 1000; ntries++) { 833 if ((IWN_READ(sc, IWN_GP_CNTRL) & 834 (IWN_GP_CNTRL_MAC_ACCESS_ENA | IWN_GP_CNTRL_SLEEP)) == 835 IWN_GP_CNTRL_MAC_ACCESS_ENA) 836 return 0; 837 DELAY(10); 838 } 839 return ETIMEDOUT; 840 } 841 842 static __inline void 843 iwn_nic_unlock(struct iwn_softc *sc) 844 { 845 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 846 } 847 848 static __inline uint32_t 849 iwn_prph_read(struct iwn_softc *sc, uint32_t addr) 850 { 851 IWN_WRITE(sc, IWN_PRPH_RADDR, IWN_PRPH_DWORD | addr); 852 IWN_BARRIER_READ_WRITE(sc); 853 return IWN_READ(sc, IWN_PRPH_RDATA); 854 } 855 856 static __inline void 857 iwn_prph_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 858 { 859 IWN_WRITE(sc, IWN_PRPH_WADDR, IWN_PRPH_DWORD | addr); 860 IWN_BARRIER_WRITE(sc); 861 IWN_WRITE(sc, IWN_PRPH_WDATA, data); 862 } 863 864 static __inline void 865 iwn_prph_setbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 866 { 867 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) | mask); 868 } 869 870 static __inline void 871 iwn_prph_clrbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 872 { 873 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) & ~mask); 874 } 875 876 static __inline void 877 iwn_prph_write_region_4(struct iwn_softc *sc, uint32_t addr, 878 const uint32_t *data, int count) 879 { 880 for (; count > 0; count--, data++, addr += 4) 881 iwn_prph_write(sc, addr, *data); 882 } 883 884 static __inline uint32_t 885 iwn_mem_read(struct iwn_softc *sc, uint32_t addr) 886 { 887 IWN_WRITE(sc, IWN_MEM_RADDR, addr); 888 IWN_BARRIER_READ_WRITE(sc); 889 return IWN_READ(sc, IWN_MEM_RDATA); 890 } 891 892 static __inline void 893 iwn_mem_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 894 { 895 IWN_WRITE(sc, IWN_MEM_WADDR, addr); 896 IWN_BARRIER_WRITE(sc); 897 IWN_WRITE(sc, IWN_MEM_WDATA, data); 898 } 899 900 static __inline void 901 iwn_mem_write_2(struct iwn_softc *sc, uint32_t addr, uint16_t data) 902 { 903 uint32_t tmp; 904 905 tmp = iwn_mem_read(sc, addr & ~3); 906 if (addr & 3) 907 tmp = (tmp & 0x0000ffff) | data << 16; 908 else 909 tmp = (tmp & 0xffff0000) | data; 910 iwn_mem_write(sc, addr & ~3, tmp); 911 } 912 913 static __inline void 914 iwn_mem_read_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t *data, 915 int count) 916 { 917 for (; count > 0; count--, addr += 4) 918 *data++ = iwn_mem_read(sc, addr); 919 } 920 921 static __inline void 922 iwn_mem_set_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t val, 923 int count) 924 { 925 for (; count > 0; count--, addr += 4) 926 iwn_mem_write(sc, addr, val); 927 } 928 929 static int 930 iwn_eeprom_lock(struct iwn_softc *sc) 931 { 932 int i, ntries; 933 934 for (i = 0; i < 100; i++) { 935 /* Request exclusive access to EEPROM. */ 936 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 937 IWN_HW_IF_CONFIG_EEPROM_LOCKED); 938 939 /* Spin until we actually get the lock. */ 940 for (ntries = 0; ntries < 100; ntries++) { 941 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 942 IWN_HW_IF_CONFIG_EEPROM_LOCKED) 943 return 0; 944 DELAY(10); 945 } 946 } 947 return ETIMEDOUT; 948 } 949 950 static __inline void 951 iwn_eeprom_unlock(struct iwn_softc *sc) 952 { 953 IWN_CLRBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_EEPROM_LOCKED); 954 } 955 956 /* 957 * Initialize access by host to One Time Programmable ROM. 958 * NB: This kind of ROM can be found on 1000 or 6000 Series only. 959 */ 960 static int 961 iwn_init_otprom(struct iwn_softc *sc) 962 { 963 uint16_t prev = 0, base, next; 964 int count, error; 965 966 /* Wait for clock stabilization before accessing prph. */ 967 if ((error = iwn_clock_wait(sc)) != 0) 968 return error; 969 970 if ((error = iwn_nic_lock(sc)) != 0) 971 return error; 972 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 973 DELAY(5); 974 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 975 iwn_nic_unlock(sc); 976 977 /* Set auto clock gate disable bit for HW with OTP shadow RAM. */ 978 if (sc->hw_type != IWN_HW_REV_TYPE_1000) { 979 IWN_SETBITS(sc, IWN_DBG_LINK_PWR_MGMT, 980 IWN_RESET_LINK_PWR_MGMT_DIS); 981 } 982 IWN_CLRBITS(sc, IWN_EEPROM_GP, IWN_EEPROM_GP_IF_OWNER); 983 /* Clear ECC status. */ 984 IWN_SETBITS(sc, IWN_OTP_GP, 985 IWN_OTP_GP_ECC_CORR_STTS | IWN_OTP_GP_ECC_UNCORR_STTS); 986 987 /* 988 * Find the block before last block (contains the EEPROM image) 989 * for HW without OTP shadow RAM. 990 */ 991 if (sc->hw_type == IWN_HW_REV_TYPE_1000) { 992 /* Switch to absolute addressing mode. */ 993 IWN_CLRBITS(sc, IWN_OTP_GP, IWN_OTP_GP_RELATIVE_ACCESS); 994 base = 0; 995 for (count = 0; count < IWN1000_OTP_NBLOCKS; count++) { 996 error = iwn_read_prom_data(sc, base, &next, 2); 997 if (error != 0) 998 return error; 999 if (next == 0) /* End of linked-list. */ 1000 break; 1001 prev = base; 1002 base = le16toh(next); 1003 } 1004 if (count == 0 || count == IWN1000_OTP_NBLOCKS) 1005 return EIO; 1006 /* Skip "next" word. */ 1007 sc->prom_base = prev + 1; 1008 } 1009 return 0; 1010 } 1011 1012 static int 1013 iwn_read_prom_data(struct iwn_softc *sc, uint32_t addr, void *data, int count) 1014 { 1015 uint8_t *out = data; 1016 uint32_t val, tmp; 1017 int ntries; 1018 1019 addr += sc->prom_base; 1020 for (; count > 0; count -= 2, addr++) { 1021 IWN_WRITE(sc, IWN_EEPROM, addr << 2); 1022 for (ntries = 0; ntries < 10; ntries++) { 1023 val = IWN_READ(sc, IWN_EEPROM); 1024 if (val & IWN_EEPROM_READ_VALID) 1025 break; 1026 DELAY(5); 1027 } 1028 if (ntries == 10) { 1029 aprint_error_dev(sc->sc_dev, 1030 "timeout reading ROM at 0x%x\n", addr); 1031 return ETIMEDOUT; 1032 } 1033 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 1034 /* OTPROM, check for ECC errors. */ 1035 tmp = IWN_READ(sc, IWN_OTP_GP); 1036 if (tmp & IWN_OTP_GP_ECC_UNCORR_STTS) { 1037 aprint_error_dev(sc->sc_dev, 1038 "OTPROM ECC error at 0x%x\n", addr); 1039 return EIO; 1040 } 1041 if (tmp & IWN_OTP_GP_ECC_CORR_STTS) { 1042 /* Correctable ECC error, clear bit. */ 1043 IWN_SETBITS(sc, IWN_OTP_GP, 1044 IWN_OTP_GP_ECC_CORR_STTS); 1045 } 1046 } 1047 *out++ = val >> 16; 1048 if (count > 1) 1049 *out++ = val >> 24; 1050 } 1051 return 0; 1052 } 1053 1054 static int 1055 iwn_dma_contig_alloc(bus_dma_tag_t tag, struct iwn_dma_info *dma, void **kvap, 1056 bus_size_t size, bus_size_t alignment) 1057 { 1058 int nsegs, error; 1059 1060 dma->tag = tag; 1061 dma->size = size; 1062 1063 error = bus_dmamap_create(tag, size, 1, size, 0, BUS_DMA_NOWAIT, 1064 &dma->map); 1065 if (error != 0) 1066 goto fail; 1067 1068 error = bus_dmamem_alloc(tag, size, alignment, 0, &dma->seg, 1, &nsegs, 1069 BUS_DMA_NOWAIT); /* XXX OpenBSD adds BUS_DMA_ZERO */ 1070 if (error != 0) 1071 goto fail; 1072 1073 error = bus_dmamem_map(tag, &dma->seg, 1, size, &dma->vaddr, 1074 BUS_DMA_NOWAIT); /* XXX OpenBSD adds BUS_DMA_COHERENT */ 1075 if (error != 0) 1076 goto fail; 1077 1078 error = bus_dmamap_load(tag, dma->map, dma->vaddr, size, NULL, 1079 BUS_DMA_NOWAIT); 1080 if (error != 0) 1081 goto fail; 1082 1083 /* XXX Presumably needed because of missing BUS_DMA_ZERO, above. */ 1084 memset(dma->vaddr, 0, size); 1085 bus_dmamap_sync(tag, dma->map, 0, size, BUS_DMASYNC_PREWRITE); 1086 1087 dma->paddr = dma->map->dm_segs[0].ds_addr; 1088 if (kvap != NULL) 1089 *kvap = dma->vaddr; 1090 1091 return 0; 1092 1093 fail: iwn_dma_contig_free(dma); 1094 return error; 1095 } 1096 1097 static void 1098 iwn_dma_contig_free(struct iwn_dma_info *dma) 1099 { 1100 if (dma->map != NULL) { 1101 if (dma->vaddr != NULL) { 1102 bus_dmamap_sync(dma->tag, dma->map, 0, dma->size, 1103 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1104 bus_dmamap_unload(dma->tag, dma->map); 1105 bus_dmamem_unmap(dma->tag, dma->vaddr, dma->size); 1106 bus_dmamem_free(dma->tag, &dma->seg, 1); 1107 dma->vaddr = NULL; 1108 } 1109 bus_dmamap_destroy(dma->tag, dma->map); 1110 dma->map = NULL; 1111 } 1112 } 1113 1114 static int 1115 iwn_alloc_sched(struct iwn_softc *sc) 1116 { 1117 /* TX scheduler rings must be aligned on a 1KB boundary. */ 1118 return iwn_dma_contig_alloc(sc->sc_dmat, &sc->sched_dma, 1119 (void **)&sc->sched, sc->schedsz, 1024); 1120 } 1121 1122 static void 1123 iwn_free_sched(struct iwn_softc *sc) 1124 { 1125 iwn_dma_contig_free(&sc->sched_dma); 1126 } 1127 1128 static int 1129 iwn_alloc_kw(struct iwn_softc *sc) 1130 { 1131 /* "Keep Warm" page must be aligned on a 4KB boundary. */ 1132 return iwn_dma_contig_alloc(sc->sc_dmat, &sc->kw_dma, NULL, 4096, 1133 4096); 1134 } 1135 1136 static void 1137 iwn_free_kw(struct iwn_softc *sc) 1138 { 1139 iwn_dma_contig_free(&sc->kw_dma); 1140 } 1141 1142 static int 1143 iwn_alloc_ict(struct iwn_softc *sc) 1144 { 1145 /* ICT table must be aligned on a 4KB boundary. */ 1146 return iwn_dma_contig_alloc(sc->sc_dmat, &sc->ict_dma, 1147 (void **)&sc->ict, IWN_ICT_SIZE, 4096); 1148 } 1149 1150 static void 1151 iwn_free_ict(struct iwn_softc *sc) 1152 { 1153 iwn_dma_contig_free(&sc->ict_dma); 1154 } 1155 1156 static int 1157 iwn_alloc_fwmem(struct iwn_softc *sc) 1158 { 1159 /* Must be aligned on a 16-byte boundary. */ 1160 return iwn_dma_contig_alloc(sc->sc_dmat, &sc->fw_dma, NULL, 1161 sc->fwsz, 16); 1162 } 1163 1164 static void 1165 iwn_free_fwmem(struct iwn_softc *sc) 1166 { 1167 iwn_dma_contig_free(&sc->fw_dma); 1168 } 1169 1170 static int 1171 iwn_alloc_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1172 { 1173 bus_size_t size; 1174 int i, error; 1175 1176 ring->cur = 0; 1177 1178 /* Allocate RX descriptors (256-byte aligned). */ 1179 size = IWN_RX_RING_COUNT * sizeof (uint32_t); 1180 error = iwn_dma_contig_alloc(sc->sc_dmat, &ring->desc_dma, 1181 (void **)&ring->desc, size, 256); 1182 if (error != 0) { 1183 aprint_error_dev(sc->sc_dev, 1184 "could not allocate RX ring DMA memory\n"); 1185 goto fail; 1186 } 1187 1188 /* Allocate RX status area (16-byte aligned). */ 1189 error = iwn_dma_contig_alloc(sc->sc_dmat, &ring->stat_dma, 1190 (void **)&ring->stat, sizeof (struct iwn_rx_status), 16); 1191 if (error != 0) { 1192 aprint_error_dev(sc->sc_dev, 1193 "could not allocate RX status DMA memory\n"); 1194 goto fail; 1195 } 1196 1197 /* 1198 * Allocate and map RX buffers. 1199 */ 1200 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1201 struct iwn_rx_data *data = &ring->data[i]; 1202 1203 error = bus_dmamap_create(sc->sc_dmat, IWN_RBUF_SIZE, 1, 1204 IWN_RBUF_SIZE, 0, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, 1205 &data->map); 1206 if (error != 0) { 1207 aprint_error_dev(sc->sc_dev, 1208 "could not create RX buf DMA map\n"); 1209 goto fail; 1210 } 1211 1212 data->m = MCLGETIalt(sc, M_DONTWAIT, NULL, IWN_RBUF_SIZE); 1213 if (data->m == NULL) { 1214 aprint_error_dev(sc->sc_dev, 1215 "could not allocate RX mbuf\n"); 1216 error = ENOBUFS; 1217 goto fail; 1218 } 1219 1220 error = bus_dmamap_load(sc->sc_dmat, data->map, 1221 mtod(data->m, void *), IWN_RBUF_SIZE, NULL, 1222 BUS_DMA_NOWAIT | BUS_DMA_READ); 1223 if (error != 0) { 1224 aprint_error_dev(sc->sc_dev, 1225 "can't not map mbuf (error %d)\n", error); 1226 goto fail; 1227 } 1228 1229 /* Set physical address of RX buffer (256-byte aligned). */ 1230 ring->desc[i] = htole32(data->map->dm_segs[0].ds_addr >> 8); 1231 } 1232 1233 bus_dmamap_sync(sc->sc_dmat, ring->desc_dma.map, 0, size, 1234 BUS_DMASYNC_PREWRITE); 1235 1236 return 0; 1237 1238 fail: iwn_free_rx_ring(sc, ring); 1239 return error; 1240 } 1241 1242 static void 1243 iwn_reset_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1244 { 1245 int ntries; 1246 1247 if (iwn_nic_lock(sc) == 0) { 1248 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 1249 for (ntries = 0; ntries < 1000; ntries++) { 1250 if (IWN_READ(sc, IWN_FH_RX_STATUS) & 1251 IWN_FH_RX_STATUS_IDLE) 1252 break; 1253 DELAY(10); 1254 } 1255 iwn_nic_unlock(sc); 1256 } 1257 ring->cur = 0; 1258 sc->last_rx_valid = 0; 1259 } 1260 1261 static void 1262 iwn_free_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1263 { 1264 int i; 1265 1266 iwn_dma_contig_free(&ring->desc_dma); 1267 iwn_dma_contig_free(&ring->stat_dma); 1268 1269 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1270 struct iwn_rx_data *data = &ring->data[i]; 1271 1272 if (data->m != NULL) { 1273 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1274 data->map->dm_mapsize, BUS_DMASYNC_POSTREAD); 1275 bus_dmamap_unload(sc->sc_dmat, data->map); 1276 m_freem(data->m); 1277 } 1278 if (data->map != NULL) 1279 bus_dmamap_destroy(sc->sc_dmat, data->map); 1280 } 1281 } 1282 1283 static int 1284 iwn_alloc_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring, int qid) 1285 { 1286 bus_addr_t paddr; 1287 bus_size_t size; 1288 int i, error; 1289 1290 ring->qid = qid; 1291 ring->queued = 0; 1292 ring->cur = 0; 1293 1294 /* Allocate TX descriptors (256-byte aligned). */ 1295 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_desc); 1296 error = iwn_dma_contig_alloc(sc->sc_dmat, &ring->desc_dma, 1297 (void **)&ring->desc, size, 256); 1298 if (error != 0) { 1299 aprint_error_dev(sc->sc_dev, 1300 "could not allocate TX ring DMA memory\n"); 1301 goto fail; 1302 } 1303 /* 1304 * We only use rings 0 through 4 (4 EDCA + cmd) so there is no need 1305 * to allocate commands space for other rings. 1306 * XXX Do we really need to allocate descriptors for other rings? 1307 */ 1308 if (qid > 4) 1309 return 0; 1310 1311 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_cmd); 1312 error = iwn_dma_contig_alloc(sc->sc_dmat, &ring->cmd_dma, 1313 (void **)&ring->cmd, size, 4); 1314 if (error != 0) { 1315 aprint_error_dev(sc->sc_dev, 1316 "could not allocate TX cmd DMA memory\n"); 1317 goto fail; 1318 } 1319 1320 paddr = ring->cmd_dma.paddr; 1321 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 1322 struct iwn_tx_data *data = &ring->data[i]; 1323 1324 data->cmd_paddr = paddr; 1325 data->scratch_paddr = paddr + 12; 1326 paddr += sizeof (struct iwn_tx_cmd); 1327 1328 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1329 IWN_MAX_SCATTER - 1, MCLBYTES, 0, BUS_DMA_NOWAIT, 1330 &data->map); 1331 if (error != 0) { 1332 aprint_error_dev(sc->sc_dev, 1333 "could not create TX buf DMA map\n"); 1334 goto fail; 1335 } 1336 } 1337 return 0; 1338 1339 fail: iwn_free_tx_ring(sc, ring); 1340 return error; 1341 } 1342 1343 static void 1344 iwn_reset_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 1345 { 1346 int i; 1347 1348 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 1349 struct iwn_tx_data *data = &ring->data[i]; 1350 1351 if (data->m != NULL) { 1352 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1353 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1354 bus_dmamap_unload(sc->sc_dmat, data->map); 1355 m_freem(data->m); 1356 data->m = NULL; 1357 } 1358 } 1359 /* Clear TX descriptors. */ 1360 memset(ring->desc, 0, ring->desc_dma.size); 1361 bus_dmamap_sync(sc->sc_dmat, ring->desc_dma.map, 0, 1362 ring->desc_dma.size, BUS_DMASYNC_PREWRITE); 1363 sc->qfullmsk &= ~(1 << ring->qid); 1364 ring->queued = 0; 1365 ring->cur = 0; 1366 } 1367 1368 static void 1369 iwn_free_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 1370 { 1371 int i; 1372 1373 iwn_dma_contig_free(&ring->desc_dma); 1374 iwn_dma_contig_free(&ring->cmd_dma); 1375 1376 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 1377 struct iwn_tx_data *data = &ring->data[i]; 1378 1379 if (data->m != NULL) { 1380 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1381 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1382 bus_dmamap_unload(sc->sc_dmat, data->map); 1383 m_freem(data->m); 1384 } 1385 if (data->map != NULL) 1386 bus_dmamap_destroy(sc->sc_dmat, data->map); 1387 } 1388 } 1389 1390 static void 1391 iwn5000_ict_reset(struct iwn_softc *sc) 1392 { 1393 /* Disable interrupts. */ 1394 IWN_WRITE(sc, IWN_INT_MASK, 0); 1395 1396 /* Reset ICT table. */ 1397 memset(sc->ict, 0, IWN_ICT_SIZE); 1398 sc->ict_cur = 0; 1399 1400 /* Set physical address of ICT table (4KB aligned). */ 1401 DPRINTF(("enabling ICT\n")); 1402 IWN_WRITE(sc, IWN_DRAM_INT_TBL, IWN_DRAM_INT_TBL_ENABLE | 1403 IWN_DRAM_INT_TBL_WRAP_CHECK | sc->ict_dma.paddr >> 12); 1404 1405 /* Enable periodic RX interrupt. */ 1406 sc->int_mask |= IWN_INT_RX_PERIODIC; 1407 /* Switch to ICT interrupt mode in driver. */ 1408 sc->sc_flags |= IWN_FLAG_USE_ICT; 1409 1410 /* Re-enable interrupts. */ 1411 IWN_WRITE(sc, IWN_INT, 0xffffffff); 1412 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 1413 } 1414 1415 static int 1416 iwn_read_eeprom(struct iwn_softc *sc) 1417 { 1418 struct iwn_ops *ops = &sc->ops; 1419 struct ieee80211com *ic = &sc->sc_ic; 1420 uint16_t val; 1421 int error; 1422 1423 /* Check whether adapter has an EEPROM or an OTPROM. */ 1424 if (sc->hw_type >= IWN_HW_REV_TYPE_1000 && 1425 (IWN_READ(sc, IWN_OTP_GP) & IWN_OTP_GP_DEV_SEL_OTP)) 1426 sc->sc_flags |= IWN_FLAG_HAS_OTPROM; 1427 DPRINTF(("%s found\n", (sc->sc_flags & IWN_FLAG_HAS_OTPROM) ? 1428 "OTPROM" : "EEPROM")); 1429 1430 /* Adapter has to be powered on for EEPROM access to work. */ 1431 if ((error = iwn_apm_init(sc)) != 0) { 1432 aprint_error_dev(sc->sc_dev, 1433 "could not power ON adapter\n"); 1434 return error; 1435 } 1436 1437 if ((IWN_READ(sc, IWN_EEPROM_GP) & 0x7) == 0) { 1438 aprint_error_dev(sc->sc_dev, 1439 "bad ROM signature\n"); 1440 return EIO; 1441 } 1442 if ((error = iwn_eeprom_lock(sc)) != 0) { 1443 aprint_error_dev(sc->sc_dev, 1444 "could not lock ROM (error=%d)\n", error); 1445 return error; 1446 } 1447 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 1448 if ((error = iwn_init_otprom(sc)) != 0) { 1449 aprint_error_dev(sc->sc_dev, 1450 "could not initialize OTPROM\n"); 1451 return error; 1452 } 1453 } 1454 1455 iwn_read_prom_data(sc, IWN_EEPROM_SKU_CAP, &val, 2); 1456 DPRINTF(("SKU capabilities=0x%04x\n", le16toh(val))); 1457 /* Check if HT support is bonded out. */ 1458 if (val & htole16(IWN_EEPROM_SKU_CAP_11N)) 1459 sc->sc_flags |= IWN_FLAG_HAS_11N; 1460 1461 iwn_read_prom_data(sc, IWN_EEPROM_RFCFG, &val, 2); 1462 sc->rfcfg = le16toh(val); 1463 DPRINTF(("radio config=0x%04x\n", sc->rfcfg)); 1464 /* Read Tx/Rx chains from ROM unless it's known to be broken. */ 1465 if (sc->txchainmask == 0) 1466 sc->txchainmask = IWN_RFCFG_TXANTMSK(sc->rfcfg); 1467 if (sc->rxchainmask == 0) 1468 sc->rxchainmask = IWN_RFCFG_RXANTMSK(sc->rfcfg); 1469 1470 /* Read MAC address. */ 1471 iwn_read_prom_data(sc, IWN_EEPROM_MAC, ic->ic_myaddr, 6); 1472 1473 /* Read adapter-specific information from EEPROM. */ 1474 ops->read_eeprom(sc); 1475 1476 iwn_apm_stop(sc); /* Power OFF adapter. */ 1477 1478 iwn_eeprom_unlock(sc); 1479 return 0; 1480 } 1481 1482 static void 1483 iwn4965_read_eeprom(struct iwn_softc *sc) 1484 { 1485 uint32_t addr; 1486 uint16_t val; 1487 int i; 1488 1489 /* Read regulatory domain (4 ASCII characters). */ 1490 iwn_read_prom_data(sc, IWN4965_EEPROM_DOMAIN, sc->eeprom_domain, 4); 1491 1492 /* Read the list of authorized channels (20MHz ones only). */ 1493 for (i = 0; i < 5; i++) { 1494 addr = iwn4965_regulatory_bands[i]; 1495 iwn_read_eeprom_channels(sc, i, addr); 1496 } 1497 1498 /* Read maximum allowed TX power for 2GHz and 5GHz bands. */ 1499 iwn_read_prom_data(sc, IWN4965_EEPROM_MAXPOW, &val, 2); 1500 sc->maxpwr2GHz = val & 0xff; 1501 sc->maxpwr5GHz = val >> 8; 1502 /* Check that EEPROM values are within valid range. */ 1503 if (sc->maxpwr5GHz < 20 || sc->maxpwr5GHz > 50) 1504 sc->maxpwr5GHz = 38; 1505 if (sc->maxpwr2GHz < 20 || sc->maxpwr2GHz > 50) 1506 sc->maxpwr2GHz = 38; 1507 DPRINTF(("maxpwr 2GHz=%d 5GHz=%d\n", sc->maxpwr2GHz, sc->maxpwr5GHz)); 1508 1509 /* Read samples for each TX power group. */ 1510 iwn_read_prom_data(sc, IWN4965_EEPROM_BANDS, sc->bands, 1511 sizeof sc->bands); 1512 1513 /* Read voltage at which samples were taken. */ 1514 iwn_read_prom_data(sc, IWN4965_EEPROM_VOLTAGE, &val, 2); 1515 sc->eeprom_voltage = (int16_t)le16toh(val); 1516 DPRINTF(("voltage=%d (in 0.3V)\n", sc->eeprom_voltage)); 1517 1518 #ifdef IWN_DEBUG 1519 /* Print samples. */ 1520 if (iwn_debug > 0) { 1521 for (i = 0; i < IWN_NBANDS; i++) 1522 iwn4965_print_power_group(sc, i); 1523 } 1524 #endif 1525 } 1526 1527 #ifdef IWN_DEBUG 1528 static void 1529 iwn4965_print_power_group(struct iwn_softc *sc, int i) 1530 { 1531 struct iwn4965_eeprom_band *band = &sc->bands[i]; 1532 struct iwn4965_eeprom_chan_samples *chans = band->chans; 1533 int j, c; 1534 1535 aprint_normal("===band %d===\n", i); 1536 aprint_normal("chan lo=%d, chan hi=%d\n", band->lo, band->hi); 1537 aprint_normal("chan1 num=%d\n", chans[0].num); 1538 for (c = 0; c < 2; c++) { 1539 for (j = 0; j < IWN_NSAMPLES; j++) { 1540 aprint_normal("chain %d, sample %d: temp=%d gain=%d " 1541 "power=%d pa_det=%d\n", c, j, 1542 chans[0].samples[c][j].temp, 1543 chans[0].samples[c][j].gain, 1544 chans[0].samples[c][j].power, 1545 chans[0].samples[c][j].pa_det); 1546 } 1547 } 1548 aprint_normal("chan2 num=%d\n", chans[1].num); 1549 for (c = 0; c < 2; c++) { 1550 for (j = 0; j < IWN_NSAMPLES; j++) { 1551 aprint_normal("chain %d, sample %d: temp=%d gain=%d " 1552 "power=%d pa_det=%d\n", c, j, 1553 chans[1].samples[c][j].temp, 1554 chans[1].samples[c][j].gain, 1555 chans[1].samples[c][j].power, 1556 chans[1].samples[c][j].pa_det); 1557 } 1558 } 1559 } 1560 #endif 1561 1562 static void 1563 iwn5000_read_eeprom(struct iwn_softc *sc) 1564 { 1565 struct iwn5000_eeprom_calib_hdr hdr; 1566 int32_t volt; 1567 uint32_t base, addr; 1568 uint16_t val; 1569 int i; 1570 1571 /* Read regulatory domain (4 ASCII characters). */ 1572 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 1573 base = le16toh(val); 1574 iwn_read_prom_data(sc, base + IWN5000_EEPROM_DOMAIN, 1575 sc->eeprom_domain, 4); 1576 1577 /* Read the list of authorized channels (20MHz ones only). */ 1578 for (i = 0; i < 5; i++) { 1579 addr = base + iwn5000_regulatory_bands[i]; 1580 iwn_read_eeprom_channels(sc, i, addr); 1581 } 1582 1583 /* Read enhanced TX power information for 6000 Series. */ 1584 if (sc->hw_type >= IWN_HW_REV_TYPE_6000) 1585 iwn_read_eeprom_enhinfo(sc); 1586 1587 iwn_read_prom_data(sc, IWN5000_EEPROM_CAL, &val, 2); 1588 base = le16toh(val); 1589 iwn_read_prom_data(sc, base, &hdr, sizeof hdr); 1590 DPRINTF(("calib version=%u pa type=%u voltage=%u\n", 1591 hdr.version, hdr.pa_type, le16toh(hdr.volt))); 1592 sc->calib_ver = hdr.version; 1593 1594 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 1595 /* Compute temperature offset. */ 1596 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 1597 sc->eeprom_temp = le16toh(val); 1598 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 1599 volt = le16toh(val); 1600 sc->temp_off = sc->eeprom_temp - (volt / -5); 1601 DPRINTF(("temp=%d volt=%d offset=%dK\n", 1602 sc->eeprom_temp, volt, sc->temp_off)); 1603 } else { 1604 /* Read crystal calibration. */ 1605 iwn_read_prom_data(sc, base + IWN5000_EEPROM_CRYSTAL, 1606 &sc->eeprom_crystal, sizeof (uint32_t)); 1607 DPRINTF(("crystal calibration 0x%08x\n", 1608 le32toh(sc->eeprom_crystal))); 1609 } 1610 } 1611 1612 static void 1613 iwn_read_eeprom_channels(struct iwn_softc *sc, int n, uint32_t addr) 1614 { 1615 struct ieee80211com *ic = &sc->sc_ic; 1616 const struct iwn_chan_band *band = &iwn_bands[n]; 1617 struct iwn_eeprom_chan channels[IWN_MAX_CHAN_PER_BAND]; 1618 uint8_t chan; 1619 int i; 1620 1621 iwn_read_prom_data(sc, addr, channels, 1622 band->nchan * sizeof (struct iwn_eeprom_chan)); 1623 1624 for (i = 0; i < band->nchan; i++) { 1625 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) 1626 continue; 1627 1628 chan = band->chan[i]; 1629 1630 if (n == 0) { /* 2GHz band */ 1631 ic->ic_channels[chan].ic_freq = 1632 ieee80211_ieee2mhz(chan, IEEE80211_CHAN_2GHZ); 1633 ic->ic_channels[chan].ic_flags = 1634 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | 1635 IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; 1636 1637 } else { /* 5GHz band */ 1638 /* 1639 * Some adapters support channels 7, 8, 11 and 12 1640 * both in the 2GHz and 4.9GHz bands. 1641 * Because of limitations in our net80211 layer, 1642 * we don't support them in the 4.9GHz band. 1643 */ 1644 if (chan <= 14) 1645 continue; 1646 1647 ic->ic_channels[chan].ic_freq = 1648 ieee80211_ieee2mhz(chan, IEEE80211_CHAN_5GHZ); 1649 ic->ic_channels[chan].ic_flags = IEEE80211_CHAN_A; 1650 /* We have at least one valid 5GHz channel. */ 1651 sc->sc_flags |= IWN_FLAG_HAS_5GHZ; 1652 } 1653 1654 /* Is active scan allowed on this channel? */ 1655 if (!(channels[i].flags & IWN_EEPROM_CHAN_ACTIVE)) { 1656 ic->ic_channels[chan].ic_flags |= 1657 IEEE80211_CHAN_PASSIVE; 1658 } 1659 1660 /* Save maximum allowed TX power for this channel. */ 1661 sc->maxpwr[chan] = channels[i].maxpwr; 1662 1663 DPRINTF(("adding chan %d flags=0x%x maxpwr=%d\n", 1664 chan, channels[i].flags, sc->maxpwr[chan])); 1665 } 1666 } 1667 1668 static void 1669 iwn_read_eeprom_enhinfo(struct iwn_softc *sc) 1670 { 1671 struct iwn_eeprom_enhinfo enhinfo[35]; 1672 uint16_t val, base; 1673 int8_t maxpwr; 1674 int i; 1675 1676 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 1677 base = le16toh(val); 1678 iwn_read_prom_data(sc, base + IWN6000_EEPROM_ENHINFO, 1679 enhinfo, sizeof enhinfo); 1680 1681 memset(sc->enh_maxpwr, 0, sizeof sc->enh_maxpwr); 1682 for (i = 0; i < __arraycount(enhinfo); i++) { 1683 if (enhinfo[i].chan == 0 || enhinfo[i].reserved != 0) 1684 continue; /* Skip invalid entries. */ 1685 1686 maxpwr = 0; 1687 if (sc->txchainmask & IWN_ANT_A) 1688 maxpwr = MAX(maxpwr, enhinfo[i].chain[0]); 1689 if (sc->txchainmask & IWN_ANT_B) 1690 maxpwr = MAX(maxpwr, enhinfo[i].chain[1]); 1691 if (sc->txchainmask & IWN_ANT_C) 1692 maxpwr = MAX(maxpwr, enhinfo[i].chain[2]); 1693 if (sc->ntxchains == 2) 1694 maxpwr = MAX(maxpwr, enhinfo[i].mimo2); 1695 else if (sc->ntxchains == 3) 1696 maxpwr = MAX(maxpwr, enhinfo[i].mimo3); 1697 maxpwr /= 2; /* Convert half-dBm to dBm. */ 1698 1699 DPRINTF(("enhinfo %d, maxpwr=%d\n", i, maxpwr)); 1700 sc->enh_maxpwr[i] = maxpwr; 1701 } 1702 } 1703 1704 static struct ieee80211_node * 1705 iwn_node_alloc(struct ieee80211_node_table *ic __unused) 1706 { 1707 return malloc(sizeof (struct iwn_node), M_80211_NODE, M_NOWAIT | M_ZERO); 1708 } 1709 1710 static void 1711 iwn_newassoc(struct ieee80211_node *ni, int isnew) 1712 { 1713 struct iwn_softc *sc = ni->ni_ic->ic_ifp->if_softc; 1714 struct iwn_node *wn = (void *)ni; 1715 uint8_t rate; 1716 int ridx, i; 1717 1718 ieee80211_amrr_node_init(&sc->amrr, &wn->amn); 1719 /* Start at lowest available bit-rate, AMRR will raise. */ 1720 ni->ni_txrate = 0; 1721 1722 for (i = 0; i < ni->ni_rates.rs_nrates; i++) { 1723 rate = ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL; 1724 /* Map 802.11 rate to HW rate index. */ 1725 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) 1726 if (iwn_rates[ridx].rate == rate) 1727 break; 1728 wn->ridx[i] = ridx; 1729 } 1730 } 1731 1732 static int 1733 iwn_media_change(struct ifnet *ifp) 1734 { 1735 struct iwn_softc *sc = ifp->if_softc; 1736 struct ieee80211com *ic = &sc->sc_ic; 1737 uint8_t rate, ridx; 1738 int error; 1739 1740 error = ieee80211_media_change(ifp); 1741 if (error != ENETRESET) 1742 return error; 1743 1744 if (ic->ic_fixed_rate != -1) { 1745 rate = ic->ic_sup_rates[ic->ic_curmode]. 1746 rs_rates[ic->ic_fixed_rate] & IEEE80211_RATE_VAL; 1747 /* Map 802.11 rate to HW rate index. */ 1748 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) 1749 if (iwn_rates[ridx].rate == rate) 1750 break; 1751 sc->fixed_ridx = ridx; 1752 } 1753 1754 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 1755 (IFF_UP | IFF_RUNNING)) { 1756 iwn_stop(ifp, 0); 1757 error = iwn_init(ifp); 1758 } 1759 return error; 1760 } 1761 1762 static int 1763 iwn_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 1764 { 1765 struct ifnet *ifp = ic->ic_ifp; 1766 struct iwn_softc *sc = ifp->if_softc; 1767 int error; 1768 1769 callout_stop(&sc->calib_to); 1770 1771 switch (nstate) { 1772 case IEEE80211_S_SCAN: 1773 /* XXX Do not abort a running scan. */ 1774 if (sc->sc_flags & IWN_FLAG_SCANNING) { 1775 if (ic->ic_state != nstate) 1776 aprint_error_dev(sc->sc_dev, "scan request(%d) " 1777 "while scanning(%d) ignored\n", nstate, 1778 ic->ic_state); 1779 break; 1780 } 1781 1782 /* XXX Not sure if call and flags are needed. */ 1783 ieee80211_node_table_reset(&ic->ic_scan); 1784 ic->ic_flags |= IEEE80211_F_SCAN | IEEE80211_F_ASCAN; 1785 sc->sc_flags |= IWN_FLAG_SCANNING; 1786 1787 /* Make the link LED blink while we're scanning. */ 1788 iwn_set_led(sc, IWN_LED_LINK, 10, 10); 1789 1790 if ((error = iwn_scan(sc, IEEE80211_CHAN_2GHZ)) != 0) { 1791 aprint_error_dev(sc->sc_dev, 1792 "could not initiate scan\n"); 1793 return error; 1794 } 1795 ic->ic_state = nstate; 1796 return 0; 1797 1798 case IEEE80211_S_ASSOC: 1799 if (ic->ic_state != IEEE80211_S_RUN) 1800 break; 1801 /* FALLTHROUGH */ 1802 case IEEE80211_S_AUTH: 1803 /* Reset state to handle reassociations correctly. */ 1804 sc->rxon.associd = 0; 1805 sc->rxon.filter &= ~htole32(IWN_FILTER_BSS); 1806 sc->calib.state = IWN_CALIB_STATE_INIT; 1807 1808 if ((error = iwn_auth(sc)) != 0) { 1809 aprint_error_dev(sc->sc_dev, 1810 "could not move to auth state\n"); 1811 return error; 1812 } 1813 break; 1814 1815 case IEEE80211_S_RUN: 1816 if ((error = iwn_run(sc)) != 0) { 1817 aprint_error_dev(sc->sc_dev, 1818 "could not move to run state\n"); 1819 return error; 1820 } 1821 break; 1822 1823 case IEEE80211_S_INIT: 1824 sc->sc_flags &= ~IWN_FLAG_SCANNING; 1825 sc->calib.state = IWN_CALIB_STATE_INIT; 1826 break; 1827 } 1828 1829 return sc->sc_newstate(ic, nstate, arg); 1830 } 1831 1832 static void 1833 iwn_iter_func(void *arg, struct ieee80211_node *ni) 1834 { 1835 struct iwn_softc *sc = arg; 1836 struct iwn_node *wn = (struct iwn_node *)ni; 1837 1838 ieee80211_amrr_choose(&sc->amrr, ni, &wn->amn); 1839 } 1840 1841 static void 1842 iwn_calib_timeout(void *arg) 1843 { 1844 struct iwn_softc *sc = arg; 1845 struct ieee80211com *ic = &sc->sc_ic; 1846 int s; 1847 1848 s = splnet(); 1849 if (ic->ic_fixed_rate == -1) { 1850 if (ic->ic_opmode == IEEE80211_M_STA) 1851 iwn_iter_func(sc, ic->ic_bss); 1852 else 1853 ieee80211_iterate_nodes(&ic->ic_sta, iwn_iter_func, sc); 1854 } 1855 /* Force automatic TX power calibration every 60 secs. */ 1856 if (++sc->calib_cnt >= 120) { 1857 uint32_t flags = 0; 1858 1859 DPRINTF(("sending request for statistics\n")); 1860 (void)iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, 1861 sizeof flags, 1); 1862 sc->calib_cnt = 0; 1863 } 1864 splx(s); 1865 1866 /* Automatic rate control triggered every 500ms. */ 1867 callout_schedule(&sc->calib_to, hz/2); 1868 } 1869 1870 /* 1871 * Process an RX_PHY firmware notification. This is usually immediately 1872 * followed by an MPDU_RX_DONE notification. 1873 */ 1874 static void 1875 iwn_rx_phy(struct iwn_softc *sc, struct iwn_rx_desc *desc, 1876 struct iwn_rx_data *data) 1877 { 1878 struct iwn_rx_stat *stat = (struct iwn_rx_stat *)(desc + 1); 1879 1880 DPRINTFN(2, ("received PHY stats\n")); 1881 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 1882 sizeof (*stat), BUS_DMASYNC_POSTREAD); 1883 1884 /* Save RX statistics, they will be used on MPDU_RX_DONE. */ 1885 memcpy(&sc->last_rx_stat, stat, sizeof (*stat)); 1886 sc->last_rx_valid = 1; 1887 } 1888 1889 /* 1890 * Process an RX_DONE (4965AGN only) or MPDU_RX_DONE firmware notification. 1891 * Each MPDU_RX_DONE notification must be preceded by an RX_PHY one. 1892 */ 1893 static void 1894 iwn_rx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 1895 struct iwn_rx_data *data) 1896 { 1897 struct iwn_ops *ops = &sc->ops; 1898 struct ieee80211com *ic = &sc->sc_ic; 1899 struct ifnet *ifp = ic->ic_ifp; 1900 struct iwn_rx_ring *ring = &sc->rxq; 1901 struct ieee80211_frame *wh; 1902 struct ieee80211_node *ni; 1903 struct mbuf *m, *m1; 1904 struct iwn_rx_stat *stat; 1905 char *head; 1906 uint32_t flags; 1907 int error, len, rssi; 1908 1909 if (desc->type == IWN_MPDU_RX_DONE) { 1910 /* Check for prior RX_PHY notification. */ 1911 if (!sc->last_rx_valid) { 1912 DPRINTF(("missing RX_PHY\n")); 1913 return; 1914 } 1915 sc->last_rx_valid = 0; 1916 stat = &sc->last_rx_stat; 1917 } else 1918 stat = (struct iwn_rx_stat *)(desc + 1); 1919 1920 bus_dmamap_sync(sc->sc_dmat, data->map, 0, IWN_RBUF_SIZE, 1921 BUS_DMASYNC_POSTREAD); 1922 1923 if (stat->cfg_phy_len > IWN_STAT_MAXLEN) { 1924 aprint_error_dev(sc->sc_dev, 1925 "invalid RX statistic header\n"); 1926 return; 1927 } 1928 if (desc->type == IWN_MPDU_RX_DONE) { 1929 struct iwn_rx_mpdu *mpdu = (struct iwn_rx_mpdu *)(desc + 1); 1930 head = (char *)(mpdu + 1); 1931 len = le16toh(mpdu->len); 1932 } else { 1933 head = (char *)(stat + 1) + stat->cfg_phy_len; 1934 len = le16toh(stat->len); 1935 } 1936 1937 flags = le32toh(*(uint32_t *)(head + len)); 1938 1939 /* Discard frames with a bad FCS early. */ 1940 if ((flags & IWN_RX_NOERROR) != IWN_RX_NOERROR) { 1941 DPRINTFN(2, ("RX flags error %x\n", flags)); 1942 ifp->if_ierrors++; 1943 return; 1944 } 1945 /* Discard frames that are too short. */ 1946 if (len < sizeof (*wh)) { 1947 DPRINTF(("frame too short: %d\n", len)); 1948 ic->ic_stats.is_rx_tooshort++; 1949 ifp->if_ierrors++; 1950 return; 1951 } 1952 1953 m1 = MCLGETIalt(sc, M_DONTWAIT, NULL, IWN_RBUF_SIZE); 1954 if (m1 == NULL) { 1955 ic->ic_stats.is_rx_nobuf++; 1956 ifp->if_ierrors++; 1957 return; 1958 } 1959 bus_dmamap_unload(sc->sc_dmat, data->map); 1960 1961 error = bus_dmamap_load(sc->sc_dmat, data->map, mtod(m1, void *), 1962 IWN_RBUF_SIZE, NULL, BUS_DMA_NOWAIT | BUS_DMA_READ); 1963 if (error != 0) { 1964 m_freem(m1); 1965 1966 /* Try to reload the old mbuf. */ 1967 error = bus_dmamap_load(sc->sc_dmat, data->map, 1968 mtod(data->m, void *), IWN_RBUF_SIZE, NULL, 1969 BUS_DMA_NOWAIT | BUS_DMA_READ); 1970 if (error != 0) { 1971 panic("%s: could not load old RX mbuf", 1972 device_xname(sc->sc_dev)); 1973 } 1974 /* Physical address may have changed. */ 1975 ring->desc[ring->cur] = 1976 htole32(data->map->dm_segs[0].ds_addr >> 8); 1977 bus_dmamap_sync(sc->sc_dmat, ring->desc_dma.map, 1978 ring->cur * sizeof (uint32_t), sizeof (uint32_t), 1979 BUS_DMASYNC_PREWRITE); 1980 ifp->if_ierrors++; 1981 return; 1982 } 1983 1984 m = data->m; 1985 data->m = m1; 1986 /* Update RX descriptor. */ 1987 ring->desc[ring->cur] = htole32(data->map->dm_segs[0].ds_addr >> 8); 1988 bus_dmamap_sync(sc->sc_dmat, ring->desc_dma.map, 1989 ring->cur * sizeof (uint32_t), sizeof (uint32_t), 1990 BUS_DMASYNC_PREWRITE); 1991 1992 /* Finalize mbuf. */ 1993 m->m_pkthdr.rcvif = ifp; 1994 m->m_data = head; 1995 m->m_pkthdr.len = m->m_len = len; 1996 1997 /* Grab a reference to the source node. */ 1998 wh = mtod(m, struct ieee80211_frame *); 1999 ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh); 2000 2001 /* XXX OpenBSD adds decryption here (see also comments in iwn_tx). */ 2002 /* NetBSD does decryption in ieee80211_input. */ 2003 2004 rssi = ops->get_rssi(stat); 2005 2006 /* XXX Added for NetBSD: scans never stop without it */ 2007 if (ic->ic_state == IEEE80211_S_SCAN) 2008 iwn_fix_channel(ic, m); 2009 2010 if (sc->sc_drvbpf != NULL) { 2011 struct iwn_rx_radiotap_header *tap = &sc->sc_rxtap; 2012 2013 tap->wr_flags = 0; 2014 if (stat->flags & htole16(IWN_STAT_FLAG_SHPREAMBLE)) 2015 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 2016 tap->wr_chan_freq = 2017 htole16(ic->ic_channels[stat->chan].ic_freq); 2018 tap->wr_chan_flags = 2019 htole16(ic->ic_channels[stat->chan].ic_flags); 2020 tap->wr_dbm_antsignal = (int8_t)rssi; 2021 tap->wr_dbm_antnoise = (int8_t)sc->noise; 2022 tap->wr_tsft = stat->tstamp; 2023 switch (stat->rate) { 2024 /* CCK rates. */ 2025 case 10: tap->wr_rate = 2; break; 2026 case 20: tap->wr_rate = 4; break; 2027 case 55: tap->wr_rate = 11; break; 2028 case 110: tap->wr_rate = 22; break; 2029 /* OFDM rates. */ 2030 case 0xd: tap->wr_rate = 12; break; 2031 case 0xf: tap->wr_rate = 18; break; 2032 case 0x5: tap->wr_rate = 24; break; 2033 case 0x7: tap->wr_rate = 36; break; 2034 case 0x9: tap->wr_rate = 48; break; 2035 case 0xb: tap->wr_rate = 72; break; 2036 case 0x1: tap->wr_rate = 96; break; 2037 case 0x3: tap->wr_rate = 108; break; 2038 /* Unknown rate: should not happen. */ 2039 default: tap->wr_rate = 0; 2040 } 2041 2042 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m); 2043 } 2044 2045 /* Send the frame to the 802.11 layer. */ 2046 ieee80211_input(ic, m, ni, rssi, 0); 2047 2048 /* Node is no longer needed. */ 2049 ieee80211_free_node(ni); 2050 } 2051 2052 #ifndef IEEE80211_NO_HT 2053 /* Process an incoming Compressed BlockAck. */ 2054 static void 2055 iwn_rx_compressed_ba(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2056 struct iwn_rx_data *data) 2057 { 2058 struct iwn_compressed_ba *ba = (struct iwn_compressed_ba *)(desc + 1); 2059 struct iwn_tx_ring *txq; 2060 2061 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), sizeof (*ba), 2062 BUS_DMASYNC_POSTREAD); 2063 2064 txq = &sc->txq[le16toh(ba->qid)]; 2065 /* XXX TBD */ 2066 } 2067 #endif 2068 2069 /* 2070 * Process a CALIBRATION_RESULT notification sent by the initialization 2071 * firmware on response to a CMD_CALIB_CONFIG command (5000 only). 2072 */ 2073 static void 2074 iwn5000_rx_calib_results(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2075 struct iwn_rx_data *data) 2076 { 2077 struct iwn_phy_calib *calib = (struct iwn_phy_calib *)(desc + 1); 2078 int len, idx = -1; 2079 2080 /* Runtime firmware should not send such a notification. */ 2081 if (sc->sc_flags & IWN_FLAG_CALIB_DONE) 2082 return; 2083 2084 len = (le32toh(desc->len) & 0x3fff) - 4; 2085 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), len, 2086 BUS_DMASYNC_POSTREAD); 2087 2088 switch (calib->code) { 2089 case IWN5000_PHY_CALIB_DC: 2090 if (sc->hw_type == IWN_HW_REV_TYPE_5150) 2091 idx = 0; 2092 break; 2093 case IWN5000_PHY_CALIB_LO: 2094 idx = 1; 2095 break; 2096 case IWN5000_PHY_CALIB_TX_IQ: 2097 idx = 2; 2098 break; 2099 case IWN5000_PHY_CALIB_TX_IQ_PERIODIC: 2100 if (sc->hw_type < IWN_HW_REV_TYPE_6000 && 2101 sc->hw_type != IWN_HW_REV_TYPE_5150) 2102 idx = 3; 2103 break; 2104 case IWN5000_PHY_CALIB_BASE_BAND: 2105 idx = 4; 2106 break; 2107 } 2108 if (idx == -1) /* Ignore other results. */ 2109 return; 2110 2111 /* Save calibration result. */ 2112 if (sc->calibcmd[idx].buf != NULL) 2113 free(sc->calibcmd[idx].buf, M_DEVBUF); 2114 sc->calibcmd[idx].buf = malloc(len, M_DEVBUF, M_NOWAIT); 2115 if (sc->calibcmd[idx].buf == NULL) { 2116 DPRINTF(("not enough memory for calibration result %d\n", 2117 calib->code)); 2118 return; 2119 } 2120 DPRINTF(("saving calibration result code=%d len=%d\n", 2121 calib->code, len)); 2122 sc->calibcmd[idx].len = len; 2123 memcpy(sc->calibcmd[idx].buf, calib, len); 2124 } 2125 2126 /* 2127 * Process an RX_STATISTICS or BEACON_STATISTICS firmware notification. 2128 * The latter is sent by the firmware after each received beacon. 2129 */ 2130 static void 2131 iwn_rx_statistics(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2132 struct iwn_rx_data *data) 2133 { 2134 struct iwn_ops *ops = &sc->ops; 2135 struct ieee80211com *ic = &sc->sc_ic; 2136 struct iwn_calib_state *calib = &sc->calib; 2137 struct iwn_stats *stats = (struct iwn_stats *)(desc + 1); 2138 int temp; 2139 2140 /* Ignore statistics received during a scan. */ 2141 if (ic->ic_state != IEEE80211_S_RUN) 2142 return; 2143 2144 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2145 sizeof (*stats), BUS_DMASYNC_POSTREAD); 2146 2147 DPRINTFN(3, ("received statistics (cmd=%d)\n", desc->type)); 2148 sc->calib_cnt = 0; /* Reset TX power calibration timeout. */ 2149 2150 /* Test if temperature has changed. */ 2151 if (stats->general.temp != sc->rawtemp) { 2152 /* Convert "raw" temperature to degC. */ 2153 sc->rawtemp = stats->general.temp; 2154 temp = ops->get_temperature(sc); 2155 DPRINTFN(2, ("temperature=%dC\n", temp)); 2156 2157 /* Update TX power if need be (4965AGN only). */ 2158 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 2159 iwn4965_power_calibration(sc, temp); 2160 } 2161 2162 if (desc->type != IWN_BEACON_STATISTICS) 2163 return; /* Reply to a statistics request. */ 2164 2165 sc->noise = iwn_get_noise(&stats->rx.general); 2166 2167 /* Test that RSSI and noise are present in stats report. */ 2168 if (le32toh(stats->rx.general.flags) != 1) { 2169 DPRINTF(("received statistics without RSSI\n")); 2170 return; 2171 } 2172 2173 /* 2174 * XXX Differential gain calibration makes the 6005 firmware 2175 * crap out, so skip it for now. This effectively disables 2176 * sensitivity tuning as well. 2177 */ 2178 if (sc->hw_type == IWN_HW_REV_TYPE_6005) 2179 return; 2180 2181 if (calib->state == IWN_CALIB_STATE_ASSOC) 2182 iwn_collect_noise(sc, &stats->rx.general); 2183 else if (calib->state == IWN_CALIB_STATE_RUN) 2184 iwn_tune_sensitivity(sc, &stats->rx); 2185 } 2186 2187 /* 2188 * Process a TX_DONE firmware notification. Unfortunately, the 4965AGN 2189 * and 5000 adapters have different incompatible TX status formats. 2190 */ 2191 static void 2192 iwn4965_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2193 struct iwn_rx_data *data) 2194 { 2195 struct iwn4965_tx_stat *stat = (struct iwn4965_tx_stat *)(desc + 1); 2196 2197 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2198 sizeof (*stat), BUS_DMASYNC_POSTREAD); 2199 iwn_tx_done(sc, desc, stat->ackfailcnt, le32toh(stat->status) & 0xff); 2200 } 2201 2202 static void 2203 iwn5000_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2204 struct iwn_rx_data *data) 2205 { 2206 struct iwn5000_tx_stat *stat = (struct iwn5000_tx_stat *)(desc + 1); 2207 2208 #ifdef notyet 2209 /* Reset TX scheduler slot. */ 2210 iwn5000_reset_sched(sc, desc->qid & 0xf, desc->idx); 2211 #endif 2212 2213 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2214 sizeof (*stat), BUS_DMASYNC_POSTREAD); 2215 iwn_tx_done(sc, desc, stat->ackfailcnt, le16toh(stat->status) & 0xff); 2216 } 2217 2218 /* 2219 * Adapter-independent backend for TX_DONE firmware notifications. 2220 */ 2221 static void 2222 iwn_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, int ackfailcnt, 2223 uint8_t status) 2224 { 2225 struct ieee80211com *ic = &sc->sc_ic; 2226 struct ifnet *ifp = ic->ic_ifp; 2227 struct iwn_tx_ring *ring = &sc->txq[desc->qid & 0xf]; 2228 struct iwn_tx_data *data = &ring->data[desc->idx]; 2229 struct iwn_node *wn = (struct iwn_node *)data->ni; 2230 2231 /* Update rate control statistics. */ 2232 wn->amn.amn_txcnt++; 2233 if (ackfailcnt > 0) 2234 wn->amn.amn_retrycnt++; 2235 2236 if (status != 1 && status != 2) 2237 ifp->if_oerrors++; 2238 else 2239 ifp->if_opackets++; 2240 2241 /* Unmap and free mbuf. */ 2242 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 2243 BUS_DMASYNC_POSTWRITE); 2244 bus_dmamap_unload(sc->sc_dmat, data->map); 2245 m_freem(data->m); 2246 data->m = NULL; 2247 ieee80211_free_node(data->ni); 2248 data->ni = NULL; 2249 2250 sc->sc_tx_timer = 0; 2251 if (--ring->queued < IWN_TX_RING_LOMARK) { 2252 sc->qfullmsk &= ~(1 << ring->qid); 2253 if (sc->qfullmsk == 0 && (ifp->if_flags & IFF_OACTIVE)) { 2254 ifp->if_flags &= ~IFF_OACTIVE; 2255 (*ifp->if_start)(ifp); 2256 } 2257 } 2258 } 2259 2260 /* 2261 * Process a "command done" firmware notification. This is where we wakeup 2262 * processes waiting for a synchronous command completion. 2263 */ 2264 static void 2265 iwn_cmd_done(struct iwn_softc *sc, struct iwn_rx_desc *desc) 2266 { 2267 struct iwn_tx_ring *ring = &sc->txq[4]; 2268 struct iwn_tx_data *data; 2269 2270 if ((desc->qid & 0xf) != 4) 2271 return; /* Not a command ack. */ 2272 2273 data = &ring->data[desc->idx]; 2274 2275 /* If the command was mapped in an mbuf, free it. */ 2276 if (data->m != NULL) { 2277 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 2278 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 2279 bus_dmamap_unload(sc->sc_dmat, data->map); 2280 m_freem(data->m); 2281 data->m = NULL; 2282 } 2283 wakeup(&ring->desc[desc->idx]); 2284 } 2285 2286 /* 2287 * Process an INT_FH_RX or INT_SW_RX interrupt. 2288 */ 2289 static void 2290 iwn_notif_intr(struct iwn_softc *sc) 2291 { 2292 struct iwn_ops *ops = &sc->ops; 2293 struct ieee80211com *ic = &sc->sc_ic; 2294 struct ifnet *ifp = ic->ic_ifp; 2295 uint16_t hw; 2296 2297 bus_dmamap_sync(sc->sc_dmat, sc->rxq.stat_dma.map, 2298 0, sc->rxq.stat_dma.size, BUS_DMASYNC_POSTREAD); 2299 2300 hw = le16toh(sc->rxq.stat->closed_count) & 0xfff; 2301 while (sc->rxq.cur != hw) { 2302 struct iwn_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 2303 struct iwn_rx_desc *desc; 2304 2305 bus_dmamap_sync(sc->sc_dmat, data->map, 0, sizeof (*desc), 2306 BUS_DMASYNC_POSTREAD); 2307 desc = mtod(data->m, struct iwn_rx_desc *); 2308 2309 DPRINTFN(4, ("notification qid=%d idx=%d flags=%x type=%d\n", 2310 desc->qid & 0xf, desc->idx, desc->flags, desc->type)); 2311 2312 if (!(desc->qid & 0x80)) /* Reply to a command. */ 2313 iwn_cmd_done(sc, desc); 2314 2315 switch (desc->type) { 2316 case IWN_RX_PHY: 2317 iwn_rx_phy(sc, desc, data); 2318 break; 2319 2320 case IWN_RX_DONE: /* 4965AGN only. */ 2321 case IWN_MPDU_RX_DONE: 2322 /* An 802.11 frame has been received. */ 2323 iwn_rx_done(sc, desc, data); 2324 break; 2325 #ifndef IEEE80211_NO_HT 2326 case IWN_RX_COMPRESSED_BA: 2327 /* A Compressed BlockAck has been received. */ 2328 iwn_rx_compressed_ba(sc, desc, data); 2329 break; 2330 #endif 2331 case IWN_TX_DONE: 2332 /* An 802.11 frame has been transmitted. */ 2333 ops->tx_done(sc, desc, data); 2334 break; 2335 2336 case IWN_RX_STATISTICS: 2337 case IWN_BEACON_STATISTICS: 2338 iwn_rx_statistics(sc, desc, data); 2339 break; 2340 2341 case IWN_BEACON_MISSED: 2342 { 2343 struct iwn_beacon_missed *miss = 2344 (struct iwn_beacon_missed *)(desc + 1); 2345 2346 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2347 sizeof (*miss), BUS_DMASYNC_POSTREAD); 2348 /* 2349 * If more than 5 consecutive beacons are missed, 2350 * reinitialize the sensitivity state machine. 2351 */ 2352 DPRINTF(("beacons missed %d/%d\n", 2353 le32toh(miss->consecutive), le32toh(miss->total))); 2354 if (ic->ic_state == IEEE80211_S_RUN && 2355 le32toh(miss->consecutive) > 5) 2356 (void)iwn_init_sensitivity(sc); 2357 break; 2358 } 2359 case IWN_UC_READY: 2360 { 2361 struct iwn_ucode_info *uc = 2362 (struct iwn_ucode_info *)(desc + 1); 2363 2364 /* The microcontroller is ready. */ 2365 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2366 sizeof (*uc), BUS_DMASYNC_POSTREAD); 2367 DPRINTF(("microcode alive notification version=%d.%d " 2368 "subtype=%x alive=%x\n", uc->major, uc->minor, 2369 uc->subtype, le32toh(uc->valid))); 2370 2371 if (le32toh(uc->valid) != 1) { 2372 aprint_error_dev(sc->sc_dev, 2373 "microcontroller initialization " 2374 "failed\n"); 2375 break; 2376 } 2377 if (uc->subtype == IWN_UCODE_INIT) { 2378 /* Save microcontroller report. */ 2379 memcpy(&sc->ucode_info, uc, sizeof (*uc)); 2380 } 2381 /* Save the address of the error log in SRAM. */ 2382 sc->errptr = le32toh(uc->errptr); 2383 break; 2384 } 2385 case IWN_STATE_CHANGED: 2386 { 2387 uint32_t *status = (uint32_t *)(desc + 1); 2388 2389 /* Enabled/disabled notification. */ 2390 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2391 sizeof (*status), BUS_DMASYNC_POSTREAD); 2392 DPRINTF(("state changed to %x\n", le32toh(*status))); 2393 2394 if (le32toh(*status) & 1) { 2395 /* The radio button has to be pushed. */ 2396 aprint_error_dev(sc->sc_dev, 2397 "Radio transmitter is off\n"); 2398 /* Turn the interface down. */ 2399 ifp->if_flags &= ~IFF_UP; 2400 iwn_stop(ifp, 1); 2401 return; /* No further processing. */ 2402 } 2403 break; 2404 } 2405 case IWN_START_SCAN: 2406 { 2407 struct iwn_start_scan *scan = 2408 (struct iwn_start_scan *)(desc + 1); 2409 2410 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2411 sizeof (*scan), BUS_DMASYNC_POSTREAD); 2412 DPRINTFN(2, ("scanning channel %d status %x\n", 2413 scan->chan, le32toh(scan->status))); 2414 2415 /* Fix current channel. */ 2416 ic->ic_bss->ni_chan = &ic->ic_channels[scan->chan]; 2417 break; 2418 } 2419 case IWN_STOP_SCAN: 2420 { 2421 struct iwn_stop_scan *scan = 2422 (struct iwn_stop_scan *)(desc + 1); 2423 2424 bus_dmamap_sync(sc->sc_dmat, data->map, sizeof (*desc), 2425 sizeof (*scan), BUS_DMASYNC_POSTREAD); 2426 DPRINTF(("scan finished nchan=%d status=%d chan=%d\n", 2427 scan->nchan, scan->status, scan->chan)); 2428 2429 if (scan->status == 1 && scan->chan <= 14 && 2430 (sc->sc_flags & IWN_FLAG_HAS_5GHZ)) { 2431 /* 2432 * We just finished scanning 2GHz channels, 2433 * start scanning 5GHz ones. 2434 */ 2435 if (iwn_scan(sc, IEEE80211_CHAN_5GHZ) == 0) 2436 break; 2437 } 2438 sc->sc_flags &= ~IWN_FLAG_SCANNING; 2439 ieee80211_end_scan(ic); 2440 break; 2441 } 2442 case IWN5000_CALIBRATION_RESULT: 2443 iwn5000_rx_calib_results(sc, desc, data); 2444 break; 2445 2446 case IWN5000_CALIBRATION_DONE: 2447 sc->sc_flags |= IWN_FLAG_CALIB_DONE; 2448 wakeup(sc); 2449 break; 2450 } 2451 2452 sc->rxq.cur = (sc->rxq.cur + 1) % IWN_RX_RING_COUNT; 2453 } 2454 2455 /* Tell the firmware what we have processed. */ 2456 hw = (hw == 0) ? IWN_RX_RING_COUNT - 1 : hw - 1; 2457 IWN_WRITE(sc, IWN_FH_RX_WPTR, hw & ~7); 2458 } 2459 2460 /* 2461 * Process an INT_WAKEUP interrupt raised when the microcontroller wakes up 2462 * from power-down sleep mode. 2463 */ 2464 static void 2465 iwn_wakeup_intr(struct iwn_softc *sc) 2466 { 2467 int qid; 2468 2469 DPRINTF(("ucode wakeup from power-down sleep\n")); 2470 2471 /* Wakeup RX and TX rings. */ 2472 IWN_WRITE(sc, IWN_FH_RX_WPTR, sc->rxq.cur & ~7); 2473 for (qid = 0; qid < sc->ntxqs; qid++) { 2474 struct iwn_tx_ring *ring = &sc->txq[qid]; 2475 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | ring->cur); 2476 } 2477 } 2478 2479 /* 2480 * Dump the error log of the firmware when a firmware panic occurs. Although 2481 * we can't debug the firmware because it is neither open source nor free, it 2482 * can help us to identify certain classes of problems. 2483 */ 2484 static void 2485 iwn_fatal_intr(struct iwn_softc *sc) 2486 { 2487 struct iwn_fw_dump dump; 2488 int i; 2489 2490 /* Force a complete recalibration on next init. */ 2491 sc->sc_flags &= ~IWN_FLAG_CALIB_DONE; 2492 2493 /* Check that the error log address is valid. */ 2494 if (sc->errptr < IWN_FW_DATA_BASE || 2495 sc->errptr + sizeof (dump) > 2496 IWN_FW_DATA_BASE + sc->fw_data_maxsz) { 2497 aprint_error_dev(sc->sc_dev, 2498 "bad firmware error log address 0x%08x\n", sc->errptr); 2499 return; 2500 } 2501 if (iwn_nic_lock(sc) != 0) { 2502 aprint_error_dev(sc->sc_dev, 2503 "could not read firmware error log\n"); 2504 return; 2505 } 2506 /* Read firmware error log from SRAM. */ 2507 iwn_mem_read_region_4(sc, sc->errptr, (uint32_t *)&dump, 2508 sizeof (dump) / sizeof (uint32_t)); 2509 iwn_nic_unlock(sc); 2510 2511 if (dump.valid == 0) { 2512 aprint_error_dev(sc->sc_dev, 2513 "firmware error log is empty\n"); 2514 return; 2515 } 2516 aprint_error("firmware error log:\n"); 2517 aprint_error(" error type = \"%s\" (0x%08X)\n", 2518 (dump.id < __arraycount(iwn_fw_errmsg)) ? 2519 iwn_fw_errmsg[dump.id] : "UNKNOWN", 2520 dump.id); 2521 aprint_error(" program counter = 0x%08X\n", dump.pc); 2522 aprint_error(" source line = 0x%08X\n", dump.src_line); 2523 aprint_error(" error data = 0x%08X%08X\n", 2524 dump.error_data[0], dump.error_data[1]); 2525 aprint_error(" branch link = 0x%08X%08X\n", 2526 dump.branch_link[0], dump.branch_link[1]); 2527 aprint_error(" interrupt link = 0x%08X%08X\n", 2528 dump.interrupt_link[0], dump.interrupt_link[1]); 2529 aprint_error(" time = %u\n", dump.time[0]); 2530 2531 /* Dump driver status (TX and RX rings) while we're here. */ 2532 aprint_error("driver status:\n"); 2533 for (i = 0; i < sc->ntxqs; i++) { 2534 struct iwn_tx_ring *ring = &sc->txq[i]; 2535 aprint_error(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n", 2536 i, ring->qid, ring->cur, ring->queued); 2537 } 2538 aprint_error(" rx ring: cur=%d\n", sc->rxq.cur); 2539 aprint_error(" 802.11 state %d\n", sc->sc_ic.ic_state); 2540 } 2541 2542 static int 2543 iwn_intr(void *arg) 2544 { 2545 struct iwn_softc *sc = arg; 2546 struct ifnet *ifp = sc->sc_ic.ic_ifp; 2547 uint32_t r1, r2, tmp; 2548 2549 /* Disable interrupts. */ 2550 IWN_WRITE(sc, IWN_INT_MASK, 0); 2551 2552 /* Read interrupts from ICT (fast) or from registers (slow). */ 2553 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 2554 tmp = 0; 2555 while (sc->ict[sc->ict_cur] != 0) { 2556 tmp |= sc->ict[sc->ict_cur]; 2557 sc->ict[sc->ict_cur] = 0; /* Acknowledge. */ 2558 sc->ict_cur = (sc->ict_cur + 1) % IWN_ICT_COUNT; 2559 } 2560 tmp = le32toh(tmp); 2561 if (tmp == 0xffffffff) /* Shouldn't happen. */ 2562 tmp = 0; 2563 else if (tmp & 0xc0000) /* Workaround a HW bug. */ 2564 tmp |= 0x8000; 2565 r1 = (tmp & 0xff00) << 16 | (tmp & 0xff); 2566 r2 = 0; /* Unused. */ 2567 } else { 2568 r1 = IWN_READ(sc, IWN_INT); 2569 if (r1 == 0xffffffff || (r1 & 0xfffffff0) == 0xa5a5a5a0) 2570 return 0; /* Hardware gone! */ 2571 r2 = IWN_READ(sc, IWN_FH_INT); 2572 } 2573 if (r1 == 0 && r2 == 0) { 2574 if (ifp->if_flags & IFF_UP) 2575 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 2576 return 0; /* Interrupt not for us. */ 2577 } 2578 2579 /* Acknowledge interrupts. */ 2580 IWN_WRITE(sc, IWN_INT, r1); 2581 if (!(sc->sc_flags & IWN_FLAG_USE_ICT)) 2582 IWN_WRITE(sc, IWN_FH_INT, r2); 2583 2584 if (r1 & IWN_INT_RF_TOGGLED) { 2585 tmp = IWN_READ(sc, IWN_GP_CNTRL); 2586 aprint_error_dev(sc->sc_dev, 2587 "RF switch: radio %s\n", 2588 (tmp & IWN_GP_CNTRL_RFKILL) ? "enabled" : "disabled"); 2589 } 2590 if (r1 & IWN_INT_CT_REACHED) { 2591 aprint_error_dev(sc->sc_dev, 2592 "critical temperature reached!\n"); 2593 } 2594 if (r1 & (IWN_INT_SW_ERR | IWN_INT_HW_ERR)) { 2595 aprint_error_dev(sc->sc_dev, 2596 "fatal firmware error\n"); 2597 /* Dump firmware error log and stop. */ 2598 iwn_fatal_intr(sc); 2599 ifp->if_flags &= ~IFF_UP; 2600 iwn_stop(ifp, 1); 2601 return 1; 2602 } 2603 if ((r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX | IWN_INT_RX_PERIODIC)) || 2604 (r2 & IWN_FH_INT_RX)) { 2605 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 2606 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) 2607 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_RX); 2608 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 2609 IWN_INT_PERIODIC_DIS); 2610 iwn_notif_intr(sc); 2611 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) { 2612 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 2613 IWN_INT_PERIODIC_ENA); 2614 } 2615 } else 2616 iwn_notif_intr(sc); 2617 } 2618 2619 if ((r1 & IWN_INT_FH_TX) || (r2 & IWN_FH_INT_TX)) { 2620 if (sc->sc_flags & IWN_FLAG_USE_ICT) 2621 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_TX); 2622 wakeup(sc); /* FH DMA transfer completed. */ 2623 } 2624 2625 if (r1 & IWN_INT_ALIVE) 2626 wakeup(sc); /* Firmware is alive. */ 2627 2628 if (r1 & IWN_INT_WAKEUP) 2629 iwn_wakeup_intr(sc); 2630 2631 /* Re-enable interrupts. */ 2632 if (ifp->if_flags & IFF_UP) 2633 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 2634 2635 return 1; 2636 } 2637 2638 /* 2639 * Update TX scheduler ring when transmitting an 802.11 frame (4965AGN and 2640 * 5000 adapters use a slightly different format). 2641 */ 2642 static void 2643 iwn4965_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 2644 uint16_t len) 2645 { 2646 uint16_t *w = &sc->sched[qid * IWN4965_SCHED_COUNT + idx]; 2647 2648 *w = htole16(len + 8); 2649 bus_dmamap_sync(sc->sc_dmat, sc->sched_dma.map, 2650 (char *)(void *)w - (char *)(void *)sc->sched_dma.vaddr, 2651 sizeof (uint16_t), 2652 BUS_DMASYNC_PREWRITE); 2653 if (idx < IWN_SCHED_WINSZ) { 2654 *(w + IWN_TX_RING_COUNT) = *w; 2655 bus_dmamap_sync(sc->sc_dmat, sc->sched_dma.map, 2656 (char *)(void *)(w + IWN_TX_RING_COUNT) - 2657 (char *)(void *)sc->sched_dma.vaddr, 2658 sizeof (uint16_t), BUS_DMASYNC_PREWRITE); 2659 } 2660 } 2661 2662 static void 2663 iwn5000_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 2664 uint16_t len) 2665 { 2666 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 2667 2668 *w = htole16(id << 12 | (len + 8)); 2669 bus_dmamap_sync(sc->sc_dmat, sc->sched_dma.map, 2670 (char *)(void *)w - (char *)(void *)sc->sched_dma.vaddr, 2671 sizeof (uint16_t), BUS_DMASYNC_PREWRITE); 2672 if (idx < IWN_SCHED_WINSZ) { 2673 *(w + IWN_TX_RING_COUNT) = *w; 2674 bus_dmamap_sync(sc->sc_dmat, sc->sched_dma.map, 2675 (char *)(void *)(w + IWN_TX_RING_COUNT) - 2676 (char *)(void *)sc->sched_dma.vaddr, 2677 sizeof (uint16_t), BUS_DMASYNC_PREWRITE); 2678 } 2679 } 2680 2681 #ifdef notyet 2682 static void 2683 iwn5000_reset_sched(struct iwn_softc *sc, int qid, int idx) 2684 { 2685 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 2686 2687 *w = (*w & htole16(0xf000)) | htole16(1); 2688 bus_dmamap_sync(sc->sc_dmat, sc->sched_dma.map, 2689 (char *)(void *)w - (char *)(void *)sc->sched_dma.vaddr, 2690 sizeof (uint16_t), BUS_DMASYNC_PREWRITE); 2691 if (idx < IWN_SCHED_WINSZ) { 2692 *(w + IWN_TX_RING_COUNT) = *w; 2693 bus_dmamap_sync(sc->sc_dmat, sc->sched_dma.map, 2694 (char *)(void *)(w + IWN_TX_RING_COUNT) - 2695 (char *)(void *)sc->sched_dma.vaddr, 2696 sizeof (uint16_t), BUS_DMASYNC_PREWRITE); 2697 } 2698 } 2699 #endif 2700 2701 static int 2702 iwn_tx(struct iwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni, int ac) 2703 { 2704 struct ieee80211com *ic = &sc->sc_ic; 2705 struct iwn_node *wn = (void *)ni; 2706 struct iwn_tx_ring *ring; 2707 struct iwn_tx_desc *desc; 2708 struct iwn_tx_data *data; 2709 struct iwn_tx_cmd *cmd; 2710 struct iwn_cmd_data *tx; 2711 const struct iwn_rate *rinfo; 2712 struct ieee80211_frame *wh; 2713 struct ieee80211_key *k = NULL; 2714 struct mbuf *m1; 2715 uint32_t flags; 2716 u_int hdrlen; 2717 bus_dma_segment_t *seg; 2718 uint8_t tid, ridx, txant, type; 2719 int i, totlen, error, pad; 2720 2721 const struct chanAccParams *cap; 2722 int noack; 2723 int hdrlen2; 2724 2725 wh = mtod(m, struct ieee80211_frame *); 2726 hdrlen = ieee80211_anyhdrsize(wh); 2727 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 2728 2729 hdrlen2 = (IEEE80211_QOS_HAS_SEQ(wh)) ? 2730 sizeof (struct ieee80211_qosframe) : 2731 sizeof (struct ieee80211_frame); 2732 2733 if (hdrlen != hdrlen2) 2734 aprint_error_dev(sc->sc_dev, "hdrlen error (%d != %d)\n", 2735 hdrlen, hdrlen2); 2736 2737 /* XXX OpenBSD sets a different tid when using QOS */ 2738 tid = 0; 2739 if (IEEE80211_QOS_HAS_SEQ(wh)) { 2740 cap = &ic->ic_wme.wme_chanParams; 2741 noack = cap->cap_wmeParams[ac].wmep_noackPolicy; 2742 } 2743 else 2744 noack = 0; 2745 2746 ring = &sc->txq[ac]; 2747 desc = &ring->desc[ring->cur]; 2748 data = &ring->data[ring->cur]; 2749 2750 /* Choose a TX rate index. */ 2751 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 2752 type != IEEE80211_FC0_TYPE_DATA) { 2753 ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ? 2754 IWN_RIDX_OFDM6 : IWN_RIDX_CCK1; 2755 } else if (ic->ic_fixed_rate != -1) { 2756 ridx = sc->fixed_ridx; 2757 } else 2758 ridx = wn->ridx[ni->ni_txrate]; 2759 rinfo = &iwn_rates[ridx]; 2760 2761 /* Encrypt the frame if need be. */ 2762 /* 2763 * XXX For now, NetBSD swaps the encryption and bpf sections 2764 * in order to match old code and other drivers. Tests with 2765 * tcpdump indicates that the order is irrelevant, however, 2766 * as bpf produces unencrypted data for both ordering choices. 2767 */ 2768 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 2769 k = ieee80211_crypto_encap(ic, ni, m); 2770 if (k == NULL) { 2771 m_freem(m); 2772 return ENOBUFS; 2773 } 2774 /* Packet header may have moved, reset our local pointer. */ 2775 wh = mtod(m, struct ieee80211_frame *); 2776 } 2777 totlen = m->m_pkthdr.len; 2778 2779 if (sc->sc_drvbpf != NULL) { 2780 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 2781 2782 tap->wt_flags = 0; 2783 tap->wt_chan_freq = htole16(ni->ni_chan->ic_freq); 2784 tap->wt_chan_flags = htole16(ni->ni_chan->ic_flags); 2785 tap->wt_rate = rinfo->rate; 2786 tap->wt_hwqueue = ac; 2787 if (wh->i_fc[1] & IEEE80211_FC1_WEP) 2788 tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; 2789 2790 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m); 2791 } 2792 2793 /* Prepare TX firmware command. */ 2794 cmd = &ring->cmd[ring->cur]; 2795 cmd->code = IWN_CMD_TX_DATA; 2796 cmd->flags = 0; 2797 cmd->qid = ring->qid; 2798 cmd->idx = ring->cur; 2799 2800 tx = (struct iwn_cmd_data *)cmd->data; 2801 /* NB: No need to clear tx, all fields are reinitialized here. */ 2802 tx->scratch = 0; /* clear "scratch" area */ 2803 2804 flags = 0; 2805 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 2806 /* Unicast frame, check if an ACK is expected. */ 2807 if (!noack) 2808 flags |= IWN_TX_NEED_ACK; 2809 } 2810 2811 #ifdef notyet 2812 /* XXX NetBSD does not define IEEE80211_FC0_SUBTYPE_BAR */ 2813 if ((wh->i_fc[0] & 2814 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 2815 (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR)) 2816 flags |= IWN_TX_IMM_BA; /* Cannot happen yet. */ 2817 #endif 2818 2819 if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG) 2820 flags |= IWN_TX_MORE_FRAG; /* Cannot happen yet. */ 2821 2822 /* Check if frame must be protected using RTS/CTS or CTS-to-self. */ 2823 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 2824 /* NB: Group frames are sent using CCK in 802.11b/g. */ 2825 if (totlen + IEEE80211_CRC_LEN > ic->ic_rtsthreshold) { 2826 flags |= IWN_TX_NEED_RTS; 2827 } else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 2828 ridx >= IWN_RIDX_OFDM6) { 2829 if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 2830 flags |= IWN_TX_NEED_CTS; 2831 else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 2832 flags |= IWN_TX_NEED_RTS; 2833 } 2834 if (flags & (IWN_TX_NEED_RTS | IWN_TX_NEED_CTS)) { 2835 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 2836 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 2837 flags &= ~(IWN_TX_NEED_RTS | IWN_TX_NEED_CTS); 2838 flags |= IWN_TX_NEED_PROTECTION; 2839 } else 2840 flags |= IWN_TX_FULL_TXOP; 2841 } 2842 } 2843 2844 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 2845 type != IEEE80211_FC0_TYPE_DATA) 2846 tx->id = sc->broadcast_id; 2847 else 2848 tx->id = wn->id; 2849 2850 if (type == IEEE80211_FC0_TYPE_MGT) { 2851 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 2852 2853 #ifndef IEEE80211_STA_ONLY 2854 /* Tell HW to set timestamp in probe responses. */ 2855 /* XXX NetBSD rev 1.11 added probe requests here but */ 2856 /* probe requests do not take timestamps (from Bergamini). */ 2857 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 2858 flags |= IWN_TX_INSERT_TSTAMP; 2859 #endif 2860 /* XXX NetBSD rev 1.11 and 1.20 added AUTH/DAUTH and RTS/CTS */ 2861 /* changes here. These are not needed (from Bergamini). */ 2862 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 2863 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 2864 tx->timeout = htole16(3); 2865 else 2866 tx->timeout = htole16(2); 2867 } else 2868 tx->timeout = htole16(0); 2869 2870 if (hdrlen & 3) { 2871 /* First segment length must be a multiple of 4. */ 2872 flags |= IWN_TX_NEED_PADDING; 2873 pad = 4 - (hdrlen & 3); 2874 } else 2875 pad = 0; 2876 2877 tx->len = htole16(totlen); 2878 tx->tid = tid; 2879 tx->rts_ntries = 60; 2880 tx->data_ntries = 15; 2881 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 2882 tx->plcp = rinfo->plcp; 2883 tx->rflags = rinfo->flags; 2884 if (tx->id == sc->broadcast_id) { 2885 /* Group or management frame. */ 2886 tx->linkq = 0; 2887 /* XXX Alternate between antenna A and B? */ 2888 txant = IWN_LSB(sc->txchainmask); 2889 tx->rflags |= IWN_RFLAG_ANT(txant); 2890 } else { 2891 tx->linkq = ni->ni_rates.rs_nrates - ni->ni_txrate - 1; 2892 flags |= IWN_TX_LINKQ; /* enable MRR */ 2893 } 2894 /* Set physical address of "scratch area". */ 2895 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr)); 2896 tx->hiaddr = IWN_HIADDR(data->scratch_paddr); 2897 2898 /* Copy 802.11 header in TX command. */ 2899 /* XXX NetBSD changed this in rev 1.20 */ 2900 memcpy(((uint8_t *)tx) + sizeof(*tx), wh, hdrlen); 2901 2902 /* Trim 802.11 header. */ 2903 m_adj(m, hdrlen); 2904 tx->security = 0; 2905 tx->flags = htole32(flags); 2906 2907 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m, 2908 BUS_DMA_NOWAIT | BUS_DMA_WRITE); 2909 if (error != 0) { 2910 if (error != EFBIG) { 2911 aprint_error_dev(sc->sc_dev, 2912 "can't map mbuf (error %d)\n", error); 2913 m_freem(m); 2914 return error; 2915 } 2916 /* Too many DMA segments, linearize mbuf. */ 2917 MGETHDR(m1, M_DONTWAIT, MT_DATA); 2918 if (m1 == NULL) { 2919 m_freem(m); 2920 return ENOBUFS; 2921 } 2922 if (m->m_pkthdr.len > MHLEN) { 2923 MCLGET(m1, M_DONTWAIT); 2924 if (!(m1->m_flags & M_EXT)) { 2925 m_freem(m); 2926 m_freem(m1); 2927 return ENOBUFS; 2928 } 2929 } 2930 m_copydata(m, 0, m->m_pkthdr.len, mtod(m1, void *)); 2931 m1->m_pkthdr.len = m1->m_len = m->m_pkthdr.len; 2932 m_freem(m); 2933 m = m1; 2934 2935 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m, 2936 BUS_DMA_NOWAIT | BUS_DMA_WRITE); 2937 if (error != 0) { 2938 aprint_error_dev(sc->sc_dev, 2939 "can't map mbuf (error %d)\n", error); 2940 m_freem(m); 2941 return error; 2942 } 2943 } 2944 2945 data->m = m; 2946 data->ni = ni; 2947 2948 DPRINTFN(4, ("sending data: qid=%d idx=%d len=%d nsegs=%d\n", 2949 ring->qid, ring->cur, m->m_pkthdr.len, data->map->dm_nsegs)); 2950 2951 /* Fill TX descriptor. */ 2952 desc->nsegs = 1 + data->map->dm_nsegs; 2953 /* First DMA segment is used by the TX command. */ 2954 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr)); 2955 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) | 2956 (4 + sizeof (*tx) + hdrlen + pad) << 4); 2957 /* Other DMA segments are for data payload. */ 2958 seg = data->map->dm_segs; 2959 for (i = 1; i <= data->map->dm_nsegs; i++) { 2960 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr)); 2961 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) | 2962 seg->ds_len << 4); 2963 seg++; 2964 } 2965 2966 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 2967 BUS_DMASYNC_PREWRITE); 2968 bus_dmamap_sync(sc->sc_dmat, ring->cmd_dma.map, 2969 (char *)(void *)cmd - (char *)(void *)ring->cmd_dma.vaddr, 2970 sizeof (*cmd), BUS_DMASYNC_PREWRITE); 2971 bus_dmamap_sync(sc->sc_dmat, ring->desc_dma.map, 2972 (char *)(void *)desc - (char *)(void *)ring->desc_dma.vaddr, 2973 sizeof (*desc), BUS_DMASYNC_PREWRITE); 2974 2975 #ifdef notyet 2976 /* Update TX scheduler. */ 2977 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen); 2978 #endif 2979 2980 /* Kick TX ring. */ 2981 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 2982 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 2983 2984 /* Mark TX ring as full if we reach a certain threshold. */ 2985 if (++ring->queued > IWN_TX_RING_HIMARK) 2986 sc->qfullmsk |= 1 << ring->qid; 2987 2988 return 0; 2989 } 2990 2991 static void 2992 iwn_start(struct ifnet *ifp) 2993 { 2994 struct iwn_softc *sc = ifp->if_softc; 2995 struct ieee80211com *ic = &sc->sc_ic; 2996 struct ieee80211_node *ni; 2997 struct ether_header *eh; 2998 struct mbuf *m; 2999 int ac; 3000 3001 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 3002 return; 3003 3004 for (;;) { 3005 if (sc->qfullmsk != 0) { 3006 ifp->if_flags |= IFF_OACTIVE; 3007 break; 3008 } 3009 /* Send pending management frames first. */ 3010 IF_DEQUEUE(&ic->ic_mgtq, m); 3011 if (m != NULL) { 3012 ni = (void *)m->m_pkthdr.rcvif; 3013 ac = 0; 3014 goto sendit; 3015 } 3016 if (ic->ic_state != IEEE80211_S_RUN) 3017 break; 3018 3019 /* Encapsulate and send data frames. */ 3020 IFQ_DEQUEUE(&ifp->if_snd, m); 3021 if (m == NULL) 3022 break; 3023 if (m->m_len < sizeof (*eh) && 3024 (m = m_pullup(m, sizeof (*eh))) == NULL) { 3025 ifp->if_oerrors++; 3026 continue; 3027 } 3028 eh = mtod(m, struct ether_header *); 3029 ni = ieee80211_find_txnode(ic, eh->ether_dhost); 3030 if (ni == NULL) { 3031 m_freem(m); 3032 ifp->if_oerrors++; 3033 continue; 3034 } 3035 /* classify mbuf so we can find which tx ring to use */ 3036 if (ieee80211_classify(ic, m, ni) != 0) { 3037 m_freem(m); 3038 ieee80211_free_node(ni); 3039 ifp->if_oerrors++; 3040 continue; 3041 } 3042 3043 /* No QoS encapsulation for EAPOL frames. */ 3044 ac = (eh->ether_type != htons(ETHERTYPE_PAE)) ? 3045 M_WME_GETAC(m) : WME_AC_BE; 3046 3047 bpf_mtap(ifp, m); 3048 3049 if ((m = ieee80211_encap(ic, m, ni)) == NULL) { 3050 ieee80211_free_node(ni); 3051 ifp->if_oerrors++; 3052 continue; 3053 } 3054 sendit: 3055 bpf_mtap3(ic->ic_rawbpf, m); 3056 3057 if (iwn_tx(sc, m, ni, ac) != 0) { 3058 ieee80211_free_node(ni); 3059 ifp->if_oerrors++; 3060 continue; 3061 } 3062 3063 sc->sc_tx_timer = 5; 3064 ifp->if_timer = 1; 3065 } 3066 } 3067 3068 static void 3069 iwn_watchdog(struct ifnet *ifp) 3070 { 3071 struct iwn_softc *sc = ifp->if_softc; 3072 3073 ifp->if_timer = 0; 3074 3075 if (sc->sc_tx_timer > 0) { 3076 if (--sc->sc_tx_timer == 0) { 3077 aprint_error_dev(sc->sc_dev, 3078 "device timeout\n"); 3079 ifp->if_flags &= ~IFF_UP; 3080 iwn_stop(ifp, 1); 3081 ifp->if_oerrors++; 3082 return; 3083 } 3084 ifp->if_timer = 1; 3085 } 3086 3087 ieee80211_watchdog(&sc->sc_ic); 3088 } 3089 3090 static int 3091 iwn_ioctl(struct ifnet *ifp, u_long cmd, void *data) 3092 { 3093 struct iwn_softc *sc = ifp->if_softc; 3094 struct ieee80211com *ic = &sc->sc_ic; 3095 struct ifaddr *ifa; 3096 const struct sockaddr *sa; 3097 int s, error = 0; 3098 3099 s = splnet(); 3100 3101 switch (cmd) { 3102 case SIOCSIFADDR: 3103 ifa = (struct ifaddr *)data; 3104 ifp->if_flags |= IFF_UP; 3105 #ifdef INET 3106 if (ifa->ifa_addr->sa_family == AF_INET) 3107 arp_ifinit(&ic->ic_ac, ifa); 3108 #endif 3109 /* FALLTHROUGH */ 3110 case SIOCSIFFLAGS: 3111 /* XXX Added as it is in every NetBSD driver */ 3112 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 3113 break; 3114 if (ifp->if_flags & IFF_UP) { 3115 if (!(ifp->if_flags & IFF_RUNNING)) 3116 error = iwn_init(ifp); 3117 } else { 3118 if (ifp->if_flags & IFF_RUNNING) 3119 iwn_stop(ifp, 1); 3120 } 3121 break; 3122 3123 case SIOCADDMULTI: 3124 case SIOCDELMULTI: 3125 sa = ifreq_getaddr(SIOCADDMULTI, (struct ifreq *)data); 3126 error = (cmd == SIOCADDMULTI) ? 3127 ether_addmulti(sa, &sc->sc_ec) : 3128 ether_delmulti(sa, &sc->sc_ec); 3129 3130 if (error == ENETRESET) 3131 error = 0; 3132 break; 3133 3134 default: 3135 error = ieee80211_ioctl(ic, cmd, data); 3136 } 3137 3138 if (error == ENETRESET) { 3139 error = 0; 3140 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 3141 (IFF_UP | IFF_RUNNING)) { 3142 iwn_stop(ifp, 0); 3143 error = iwn_init(ifp); 3144 } 3145 } 3146 3147 splx(s); 3148 return error; 3149 } 3150 3151 /* 3152 * Send a command to the firmware. 3153 */ 3154 static int 3155 iwn_cmd(struct iwn_softc *sc, int code, const void *buf, int size, int async) 3156 { 3157 struct iwn_tx_ring *ring = &sc->txq[4]; 3158 struct iwn_tx_desc *desc; 3159 struct iwn_tx_data *data; 3160 struct iwn_tx_cmd *cmd; 3161 struct mbuf *m; 3162 bus_addr_t paddr; 3163 int totlen, error; 3164 3165 desc = &ring->desc[ring->cur]; 3166 data = &ring->data[ring->cur]; 3167 totlen = 4 + size; 3168 3169 if (size > sizeof cmd->data) { 3170 /* Command is too large to fit in a descriptor. */ 3171 if (totlen > MCLBYTES) 3172 return EINVAL; 3173 MGETHDR(m, M_DONTWAIT, MT_DATA); 3174 if (m == NULL) 3175 return ENOMEM; 3176 if (totlen > MHLEN) { 3177 MCLGET(m, M_DONTWAIT); 3178 if (!(m->m_flags & M_EXT)) { 3179 m_freem(m); 3180 return ENOMEM; 3181 } 3182 } 3183 cmd = mtod(m, struct iwn_tx_cmd *); 3184 error = bus_dmamap_load(sc->sc_dmat, data->map, cmd, totlen, 3185 NULL, BUS_DMA_NOWAIT | BUS_DMA_WRITE); 3186 if (error != 0) { 3187 m_freem(m); 3188 return error; 3189 } 3190 data->m = m; 3191 paddr = data->map->dm_segs[0].ds_addr; 3192 } else { 3193 cmd = &ring->cmd[ring->cur]; 3194 paddr = data->cmd_paddr; 3195 } 3196 3197 cmd->code = code; 3198 cmd->flags = 0; 3199 cmd->qid = ring->qid; 3200 cmd->idx = ring->cur; 3201 memcpy(cmd->data, buf, size); 3202 3203 desc->nsegs = 1; 3204 desc->segs[0].addr = htole32(IWN_LOADDR(paddr)); 3205 desc->segs[0].len = htole16(IWN_HIADDR(paddr) | totlen << 4); 3206 3207 if (size > sizeof cmd->data) { 3208 bus_dmamap_sync(sc->sc_dmat, data->map, 0, totlen, 3209 BUS_DMASYNC_PREWRITE); 3210 } else { 3211 bus_dmamap_sync(sc->sc_dmat, ring->cmd_dma.map, 3212 (char *)(void *)cmd - (char *)(void *)ring->cmd_dma.vaddr, 3213 totlen, BUS_DMASYNC_PREWRITE); 3214 } 3215 bus_dmamap_sync(sc->sc_dmat, ring->desc_dma.map, 3216 (char *)(void *)desc - (char *)(void *)ring->desc_dma.vaddr, 3217 sizeof (*desc), BUS_DMASYNC_PREWRITE); 3218 3219 #ifdef notyet 3220 /* Update TX scheduler. */ 3221 ops->update_sched(sc, ring->qid, ring->cur, 0, 0); 3222 #endif 3223 DPRINTFN(4, ("iwn_cmd %d size=%d %s\n", code, size, async ? " (async)" : "")); 3224 3225 /* Kick command ring. */ 3226 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 3227 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 3228 3229 return async ? 0 : tsleep(desc, PCATCH, "iwncmd", hz); 3230 } 3231 3232 static int 3233 iwn4965_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 3234 { 3235 struct iwn4965_node_info hnode; 3236 char *src, *dst; 3237 3238 /* 3239 * We use the node structure for 5000 Series internally (it is 3240 * a superset of the one for 4965AGN). We thus copy the common 3241 * fields before sending the command. 3242 */ 3243 src = (char *)node; 3244 dst = (char *)&hnode; 3245 memcpy(dst, src, 48); 3246 /* Skip TSC, RX MIC and TX MIC fields from ``src''. */ 3247 memcpy(dst + 48, src + 72, 20); 3248 return iwn_cmd(sc, IWN_CMD_ADD_NODE, &hnode, sizeof hnode, async); 3249 } 3250 3251 static int 3252 iwn5000_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 3253 { 3254 /* Direct mapping. */ 3255 return iwn_cmd(sc, IWN_CMD_ADD_NODE, node, sizeof (*node), async); 3256 } 3257 3258 static int 3259 iwn_set_link_quality(struct iwn_softc *sc, struct ieee80211_node *ni) 3260 { 3261 struct iwn_node *wn = (void *)ni; 3262 struct ieee80211_rateset *rs = &ni->ni_rates; 3263 struct iwn_cmd_link_quality linkq; 3264 const struct iwn_rate *rinfo; 3265 uint8_t txant; 3266 int i, txrate; 3267 3268 /* Use the first valid TX antenna. */ 3269 txant = IWN_LSB(sc->txchainmask); 3270 3271 memset(&linkq, 0, sizeof linkq); 3272 linkq.id = wn->id; 3273 linkq.antmsk_1stream = txant; 3274 linkq.antmsk_2stream = IWN_ANT_AB; 3275 linkq.ampdu_max = 31; 3276 linkq.ampdu_threshold = 3; 3277 linkq.ampdu_limit = htole16(4000); /* 4ms */ 3278 3279 /* Start at highest available bit-rate. */ 3280 txrate = rs->rs_nrates - 1; 3281 for (i = 0; i < IWN_MAX_TX_RETRIES; i++) { 3282 rinfo = &iwn_rates[wn->ridx[txrate]]; 3283 linkq.retry[i].plcp = rinfo->plcp; 3284 linkq.retry[i].rflags = rinfo->flags; 3285 linkq.retry[i].rflags |= IWN_RFLAG_ANT(txant); 3286 /* Next retry at immediate lower bit-rate. */ 3287 if (txrate > 0) 3288 txrate--; 3289 } 3290 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, 1); 3291 } 3292 3293 /* 3294 * Broadcast node is used to send group-addressed and management frames. 3295 */ 3296 static int 3297 iwn_add_broadcast_node(struct iwn_softc *sc, int async) 3298 { 3299 struct iwn_ops *ops = &sc->ops; 3300 struct iwn_node_info node; 3301 struct iwn_cmd_link_quality linkq; 3302 const struct iwn_rate *rinfo; 3303 uint8_t txant; 3304 int i, error; 3305 3306 memset(&node, 0, sizeof node); 3307 IEEE80211_ADDR_COPY(node.macaddr, etherbroadcastaddr); 3308 node.id = sc->broadcast_id; 3309 DPRINTF(("adding broadcast node\n")); 3310 if ((error = ops->add_node(sc, &node, async)) != 0) 3311 return error; 3312 3313 /* Use the first valid TX antenna. */ 3314 txant = IWN_LSB(sc->txchainmask); 3315 3316 memset(&linkq, 0, sizeof linkq); 3317 linkq.id = sc->broadcast_id; 3318 linkq.antmsk_1stream = txant; 3319 linkq.antmsk_2stream = IWN_ANT_AB; 3320 linkq.ampdu_max = 64; 3321 linkq.ampdu_threshold = 3; 3322 linkq.ampdu_limit = htole16(4000); /* 4ms */ 3323 3324 /* Use lowest mandatory bit-rate. */ 3325 rinfo = (sc->sc_ic.ic_curmode != IEEE80211_MODE_11A) ? 3326 &iwn_rates[IWN_RIDX_CCK1] : &iwn_rates[IWN_RIDX_OFDM6]; 3327 linkq.retry[0].plcp = rinfo->plcp; 3328 linkq.retry[0].rflags = rinfo->flags; 3329 linkq.retry[0].rflags |= IWN_RFLAG_ANT(txant); 3330 /* Use same bit-rate for all TX retries. */ 3331 for (i = 1; i < IWN_MAX_TX_RETRIES; i++) { 3332 linkq.retry[i].plcp = linkq.retry[0].plcp; 3333 linkq.retry[i].rflags = linkq.retry[0].rflags; 3334 } 3335 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, async); 3336 } 3337 3338 static void 3339 iwn_set_led(struct iwn_softc *sc, uint8_t which, uint8_t off, uint8_t on) 3340 { 3341 struct iwn_cmd_led led; 3342 3343 /* Clear microcode LED ownership. */ 3344 IWN_CLRBITS(sc, IWN_LED, IWN_LED_BSM_CTRL); 3345 3346 led.which = which; 3347 led.unit = htole32(10000); /* on/off in unit of 100ms */ 3348 led.off = off; 3349 led.on = on; 3350 (void)iwn_cmd(sc, IWN_CMD_SET_LED, &led, sizeof led, 1); 3351 } 3352 3353 /* 3354 * Set the critical temperature at which the firmware will stop the radio 3355 * and notify us. 3356 */ 3357 static int 3358 iwn_set_critical_temp(struct iwn_softc *sc) 3359 { 3360 struct iwn_critical_temp crit; 3361 int32_t temp; 3362 3363 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CTEMP_STOP_RF); 3364 3365 if (sc->hw_type == IWN_HW_REV_TYPE_5150) 3366 temp = (IWN_CTOK(110) - sc->temp_off) * -5; 3367 else if (sc->hw_type == IWN_HW_REV_TYPE_4965) 3368 temp = IWN_CTOK(110); 3369 else 3370 temp = 110; 3371 memset(&crit, 0, sizeof crit); 3372 crit.tempR = htole32(temp); 3373 DPRINTF(("setting critical temperature to %d\n", temp)); 3374 return iwn_cmd(sc, IWN_CMD_SET_CRITICAL_TEMP, &crit, sizeof crit, 0); 3375 } 3376 3377 static int 3378 iwn_set_timing(struct iwn_softc *sc, struct ieee80211_node *ni) 3379 { 3380 struct iwn_cmd_timing cmd; 3381 uint64_t val, mod; 3382 3383 memset(&cmd, 0, sizeof cmd); 3384 memcpy(&cmd.tstamp, ni->ni_tstamp.data, sizeof (uint64_t)); 3385 cmd.bintval = htole16(ni->ni_intval); 3386 cmd.lintval = htole16(10); 3387 3388 /* Compute remaining time until next beacon. */ 3389 val = (uint64_t)ni->ni_intval * 1024; /* msecs -> usecs */ 3390 mod = le64toh(cmd.tstamp) % val; 3391 cmd.binitval = htole32((uint32_t)(val - mod)); 3392 3393 DPRINTF(("timing bintval=%u, tstamp=%" PRIu64 ", init=%" PRIu32 "\n", 3394 ni->ni_intval, le64toh(cmd.tstamp), (uint32_t)(val - mod))); 3395 3396 return iwn_cmd(sc, IWN_CMD_TIMING, &cmd, sizeof cmd, 1); 3397 } 3398 3399 static void 3400 iwn4965_power_calibration(struct iwn_softc *sc, int temp) 3401 { 3402 /* Adjust TX power if need be (delta >= 3 degC). */ 3403 DPRINTF(("temperature %d->%d\n", sc->temp, temp)); 3404 if (abs(temp - sc->temp) >= 3) { 3405 /* Record temperature of last calibration. */ 3406 sc->temp = temp; 3407 (void)iwn4965_set_txpower(sc, 1); 3408 } 3409 } 3410 3411 /* 3412 * Set TX power for current channel (each rate has its own power settings). 3413 * This function takes into account the regulatory information from EEPROM, 3414 * the current temperature and the current voltage. 3415 */ 3416 static int 3417 iwn4965_set_txpower(struct iwn_softc *sc, int async) 3418 { 3419 /* Fixed-point arithmetic division using a n-bit fractional part. */ 3420 #define fdivround(a, b, n) \ 3421 ((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n)) 3422 /* Linear interpolation. */ 3423 #define interpolate(x, x1, y1, x2, y2, n) \ 3424 ((y1) + fdivround(((int)(x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n)) 3425 3426 static const int tdiv[IWN_NATTEN_GROUPS] = { 9, 8, 8, 8, 6 }; 3427 struct ieee80211com *ic = &sc->sc_ic; 3428 struct iwn_ucode_info *uc = &sc->ucode_info; 3429 struct ieee80211_channel *ch; 3430 struct iwn4965_cmd_txpower cmd; 3431 struct iwn4965_eeprom_chan_samples *chans; 3432 const uint8_t *rf_gain, *dsp_gain; 3433 int32_t vdiff, tdiff; 3434 int i, c, grp, maxpwr; 3435 uint8_t chan; 3436 3437 /* Retrieve current channel from last RXON. */ 3438 chan = sc->rxon.chan; 3439 DPRINTF(("setting TX power for channel %d\n", chan)); 3440 ch = &ic->ic_channels[chan]; 3441 3442 memset(&cmd, 0, sizeof cmd); 3443 cmd.band = IEEE80211_IS_CHAN_5GHZ(ch) ? 0 : 1; 3444 cmd.chan = chan; 3445 3446 if (IEEE80211_IS_CHAN_5GHZ(ch)) { 3447 maxpwr = sc->maxpwr5GHz; 3448 rf_gain = iwn4965_rf_gain_5ghz; 3449 dsp_gain = iwn4965_dsp_gain_5ghz; 3450 } else { 3451 maxpwr = sc->maxpwr2GHz; 3452 rf_gain = iwn4965_rf_gain_2ghz; 3453 dsp_gain = iwn4965_dsp_gain_2ghz; 3454 } 3455 3456 /* Compute voltage compensation. */ 3457 vdiff = ((int32_t)le32toh(uc->volt) - sc->eeprom_voltage) / 7; 3458 if (vdiff > 0) 3459 vdiff *= 2; 3460 if (abs(vdiff) > 2) 3461 vdiff = 0; 3462 DPRINTF(("voltage compensation=%d (UCODE=%d, EEPROM=%d)\n", 3463 vdiff, le32toh(uc->volt), sc->eeprom_voltage)); 3464 3465 /* Get channel attenuation group. */ 3466 if (chan <= 20) /* 1-20 */ 3467 grp = 4; 3468 else if (chan <= 43) /* 34-43 */ 3469 grp = 0; 3470 else if (chan <= 70) /* 44-70 */ 3471 grp = 1; 3472 else if (chan <= 124) /* 71-124 */ 3473 grp = 2; 3474 else /* 125-200 */ 3475 grp = 3; 3476 DPRINTF(("chan %d, attenuation group=%d\n", chan, grp)); 3477 3478 /* Get channel sub-band. */ 3479 for (i = 0; i < IWN_NBANDS; i++) 3480 if (sc->bands[i].lo != 0 && 3481 sc->bands[i].lo <= chan && chan <= sc->bands[i].hi) 3482 break; 3483 if (i == IWN_NBANDS) /* Can't happen in real-life. */ 3484 return EINVAL; 3485 chans = sc->bands[i].chans; 3486 DPRINTF(("chan %d sub-band=%d\n", chan, i)); 3487 3488 for (c = 0; c < 2; c++) { 3489 uint8_t power, gain, temp; 3490 int maxchpwr, pwr, ridx, idx; 3491 3492 power = interpolate(chan, 3493 chans[0].num, chans[0].samples[c][1].power, 3494 chans[1].num, chans[1].samples[c][1].power, 1); 3495 gain = interpolate(chan, 3496 chans[0].num, chans[0].samples[c][1].gain, 3497 chans[1].num, chans[1].samples[c][1].gain, 1); 3498 temp = interpolate(chan, 3499 chans[0].num, chans[0].samples[c][1].temp, 3500 chans[1].num, chans[1].samples[c][1].temp, 1); 3501 DPRINTF(("TX chain %d: power=%d gain=%d temp=%d\n", 3502 c, power, gain, temp)); 3503 3504 /* Compute temperature compensation. */ 3505 tdiff = ((sc->temp - temp) * 2) / tdiv[grp]; 3506 DPRINTF(("temperature compensation=%d (current=%d, " 3507 "EEPROM=%d)\n", tdiff, sc->temp, temp)); 3508 3509 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) { 3510 /* Convert dBm to half-dBm. */ 3511 maxchpwr = sc->maxpwr[chan] * 2; 3512 if ((ridx / 8) & 1) 3513 maxchpwr -= 6; /* MIMO 2T: -3dB */ 3514 3515 pwr = maxpwr; 3516 3517 /* Adjust TX power based on rate. */ 3518 if ((ridx % 8) == 5) 3519 pwr -= 15; /* OFDM48: -7.5dB */ 3520 else if ((ridx % 8) == 6) 3521 pwr -= 17; /* OFDM54: -8.5dB */ 3522 else if ((ridx % 8) == 7) 3523 pwr -= 20; /* OFDM60: -10dB */ 3524 else 3525 pwr -= 10; /* Others: -5dB */ 3526 3527 /* Do not exceed channel max TX power. */ 3528 if (pwr > maxchpwr) 3529 pwr = maxchpwr; 3530 3531 idx = gain - (pwr - power) - tdiff - vdiff; 3532 if ((ridx / 8) & 1) /* MIMO */ 3533 idx += (int32_t)le32toh(uc->atten[grp][c]); 3534 3535 if (cmd.band == 0) 3536 idx += 9; /* 5GHz */ 3537 if (ridx == IWN_RIDX_MAX) 3538 idx += 5; /* CCK */ 3539 3540 /* Make sure idx stays in a valid range. */ 3541 if (idx < 0) 3542 idx = 0; 3543 else if (idx > IWN4965_MAX_PWR_INDEX) 3544 idx = IWN4965_MAX_PWR_INDEX; 3545 3546 DPRINTF(("TX chain %d, rate idx %d: power=%d\n", 3547 c, ridx, idx)); 3548 cmd.power[ridx].rf_gain[c] = rf_gain[idx]; 3549 cmd.power[ridx].dsp_gain[c] = dsp_gain[idx]; 3550 } 3551 } 3552 3553 DPRINTF(("setting TX power for chan %d\n", chan)); 3554 return iwn_cmd(sc, IWN_CMD_TXPOWER, &cmd, sizeof cmd, async); 3555 3556 #undef interpolate 3557 #undef fdivround 3558 } 3559 3560 static int 3561 iwn5000_set_txpower(struct iwn_softc *sc, int async) 3562 { 3563 struct iwn5000_cmd_txpower cmd; 3564 3565 /* 3566 * TX power calibration is handled automatically by the firmware 3567 * for 5000 Series. 3568 */ 3569 memset(&cmd, 0, sizeof cmd); 3570 cmd.global_limit = 2 * IWN5000_TXPOWER_MAX_DBM; /* 16 dBm */ 3571 cmd.flags = IWN5000_TXPOWER_NO_CLOSED; 3572 cmd.srv_limit = IWN5000_TXPOWER_AUTO; 3573 DPRINTF(("setting TX power\n")); 3574 return iwn_cmd(sc, IWN_CMD_TXPOWER_DBM, &cmd, sizeof cmd, async); 3575 } 3576 3577 /* 3578 * Retrieve the maximum RSSI (in dBm) among receivers. 3579 */ 3580 static int 3581 iwn4965_get_rssi(const struct iwn_rx_stat *stat) 3582 { 3583 const struct iwn4965_rx_phystat *phy = (const void *)stat->phybuf; 3584 uint8_t mask, agc; 3585 int rssi; 3586 3587 mask = (le16toh(phy->antenna) >> 4) & IWN_ANT_ABC; 3588 agc = (le16toh(phy->agc) >> 7) & 0x7f; 3589 3590 rssi = 0; 3591 if (mask & IWN_ANT_A) 3592 rssi = MAX(rssi, phy->rssi[0]); 3593 if (mask & IWN_ANT_B) 3594 rssi = MAX(rssi, phy->rssi[2]); 3595 if (mask & IWN_ANT_C) 3596 rssi = MAX(rssi, phy->rssi[4]); 3597 3598 return rssi - agc - IWN_RSSI_TO_DBM; 3599 } 3600 3601 static int 3602 iwn5000_get_rssi(const struct iwn_rx_stat *stat) 3603 { 3604 const struct iwn5000_rx_phystat *phy = (const void *)stat->phybuf; 3605 uint8_t agc; 3606 int rssi; 3607 3608 agc = (le32toh(phy->agc) >> 9) & 0x7f; 3609 3610 rssi = MAX(le16toh(phy->rssi[0]) & 0xff, 3611 le16toh(phy->rssi[1]) & 0xff); 3612 rssi = MAX(le16toh(phy->rssi[2]) & 0xff, rssi); 3613 3614 return rssi - agc - IWN_RSSI_TO_DBM; 3615 } 3616 3617 /* 3618 * Retrieve the average noise (in dBm) among receivers. 3619 */ 3620 static int 3621 iwn_get_noise(const struct iwn_rx_general_stats *stats) 3622 { 3623 int i, total, nbant, noise; 3624 3625 total = nbant = 0; 3626 for (i = 0; i < 3; i++) { 3627 if ((noise = le32toh(stats->noise[i]) & 0xff) == 0) 3628 continue; 3629 total += noise; 3630 nbant++; 3631 } 3632 /* There should be at least one antenna but check anyway. */ 3633 return (nbant == 0) ? -127 : (total / nbant) - 107; 3634 } 3635 3636 /* 3637 * Compute temperature (in degC) from last received statistics. 3638 */ 3639 static int 3640 iwn4965_get_temperature(struct iwn_softc *sc) 3641 { 3642 struct iwn_ucode_info *uc = &sc->ucode_info; 3643 int32_t r1, r2, r3, r4, temp; 3644 3645 r1 = le32toh(uc->temp[0].chan20MHz); 3646 r2 = le32toh(uc->temp[1].chan20MHz); 3647 r3 = le32toh(uc->temp[2].chan20MHz); 3648 r4 = le32toh(sc->rawtemp); 3649 3650 if (r1 == r3) /* Prevents division by 0 (should not happen). */ 3651 return 0; 3652 3653 /* Sign-extend 23-bit R4 value to 32-bit. */ 3654 r4 = ((r4 & 0xffffff) ^ 0x800000) - 0x800000; 3655 /* Compute temperature in Kelvin. */ 3656 temp = (259 * (r4 - r2)) / (r3 - r1); 3657 temp = (temp * 97) / 100 + 8; 3658 3659 DPRINTF(("temperature %dK/%dC\n", temp, IWN_KTOC(temp))); 3660 return IWN_KTOC(temp); 3661 } 3662 3663 static int 3664 iwn5000_get_temperature(struct iwn_softc *sc) 3665 { 3666 int32_t temp; 3667 3668 /* 3669 * Temperature is not used by the driver for 5000 Series because 3670 * TX power calibration is handled by firmware. We export it to 3671 * users through the sensor framework though. 3672 */ 3673 temp = le32toh(sc->rawtemp); 3674 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 3675 temp = (temp / -5) + sc->temp_off; 3676 temp = IWN_KTOC(temp); 3677 } 3678 return temp; 3679 } 3680 3681 /* 3682 * Initialize sensitivity calibration state machine. 3683 */ 3684 static int 3685 iwn_init_sensitivity(struct iwn_softc *sc) 3686 { 3687 struct iwn_ops *ops = &sc->ops; 3688 struct iwn_calib_state *calib = &sc->calib; 3689 uint32_t flags; 3690 int error; 3691 3692 /* Reset calibration state machine. */ 3693 memset(calib, 0, sizeof (*calib)); 3694 calib->state = IWN_CALIB_STATE_INIT; 3695 calib->cck_state = IWN_CCK_STATE_HIFA; 3696 /* Set initial correlation values. */ 3697 calib->ofdm_x1 = sc->limits->min_ofdm_x1; 3698 calib->ofdm_mrc_x1 = sc->limits->min_ofdm_mrc_x1; 3699 calib->ofdm_x4 = sc->limits->min_ofdm_x4; 3700 calib->ofdm_mrc_x4 = sc->limits->min_ofdm_mrc_x4; 3701 calib->cck_x4 = 125; 3702 calib->cck_mrc_x4 = sc->limits->min_cck_mrc_x4; 3703 calib->energy_cck = sc->limits->energy_cck; 3704 3705 /* Write initial sensitivity. */ 3706 if ((error = iwn_send_sensitivity(sc)) != 0) 3707 return error; 3708 3709 /* Write initial gains. */ 3710 if ((error = ops->init_gains(sc)) != 0) 3711 return error; 3712 3713 /* Request statistics at each beacon interval. */ 3714 flags = 0; 3715 DPRINTF(("sending request for statistics\n")); 3716 return iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, sizeof flags, 1); 3717 } 3718 3719 /* 3720 * Collect noise and RSSI statistics for the first 20 beacons received 3721 * after association and use them to determine connected antennas and 3722 * to set differential gains. 3723 */ 3724 static void 3725 iwn_collect_noise(struct iwn_softc *sc, 3726 const struct iwn_rx_general_stats *stats) 3727 { 3728 struct iwn_ops *ops = &sc->ops; 3729 struct iwn_calib_state *calib = &sc->calib; 3730 uint32_t val; 3731 int i; 3732 3733 /* Accumulate RSSI and noise for all 3 antennas. */ 3734 for (i = 0; i < 3; i++) { 3735 calib->rssi[i] += le32toh(stats->rssi[i]) & 0xff; 3736 calib->noise[i] += le32toh(stats->noise[i]) & 0xff; 3737 } 3738 /* NB: We update differential gains only once after 20 beacons. */ 3739 if (++calib->nbeacons < 20) 3740 return; 3741 3742 /* Determine highest average RSSI. */ 3743 val = MAX(calib->rssi[0], calib->rssi[1]); 3744 val = MAX(calib->rssi[2], val); 3745 3746 /* Determine which antennas are connected. */ 3747 sc->chainmask = sc->rxchainmask; 3748 for (i = 0; i < 3; i++) 3749 if (val - calib->rssi[i] > 15 * 20) 3750 sc->chainmask &= ~(1 << i); 3751 DPRINTF(("RX chains mask: theoretical=0x%x, actual=0x%x\n", 3752 sc->rxchainmask, sc->chainmask)); 3753 3754 /* If none of the TX antennas are connected, keep at least one. */ 3755 if ((sc->chainmask & sc->txchainmask) == 0) 3756 sc->chainmask |= IWN_LSB(sc->txchainmask); 3757 3758 (void)ops->set_gains(sc); 3759 calib->state = IWN_CALIB_STATE_RUN; 3760 3761 #ifdef notyet 3762 /* XXX Disable RX chains with no antennas connected. */ 3763 sc->rxon.rxchain = htole16(IWN_RXCHAIN_SEL(sc->chainmask)); 3764 (void)iwn_cmd(sc, IWN_CMD_RXON, &sc->rxon, sc->rxonsz, 1); 3765 #endif 3766 3767 /* Enable power-saving mode if requested by user. */ 3768 if (sc->sc_ic.ic_flags & IEEE80211_F_PMGTON) 3769 (void)iwn_set_pslevel(sc, 0, 3, 1); 3770 } 3771 3772 static int 3773 iwn4965_init_gains(struct iwn_softc *sc) 3774 { 3775 struct iwn_phy_calib_gain cmd; 3776 3777 memset(&cmd, 0, sizeof cmd); 3778 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 3779 /* Differential gains initially set to 0 for all 3 antennas. */ 3780 DPRINTF(("setting initial differential gains\n")); 3781 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 3782 } 3783 3784 static int 3785 iwn5000_init_gains(struct iwn_softc *sc) 3786 { 3787 struct iwn_phy_calib cmd; 3788 3789 memset(&cmd, 0, sizeof cmd); 3790 cmd.code = IWN5000_PHY_CALIB_RESET_NOISE_GAIN; 3791 cmd.ngroups = 1; 3792 cmd.isvalid = 1; 3793 DPRINTF(("setting initial differential gains\n")); 3794 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 3795 } 3796 3797 static int 3798 iwn4965_set_gains(struct iwn_softc *sc) 3799 { 3800 struct iwn_calib_state *calib = &sc->calib; 3801 struct iwn_phy_calib_gain cmd; 3802 int i, delta, noise; 3803 3804 /* Get minimal noise among connected antennas. */ 3805 noise = INT_MAX; /* NB: There's at least one antenna. */ 3806 for (i = 0; i < 3; i++) 3807 if (sc->chainmask & (1 << i)) 3808 noise = MIN(calib->noise[i], noise); 3809 3810 memset(&cmd, 0, sizeof cmd); 3811 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 3812 /* Set differential gains for connected antennas. */ 3813 for (i = 0; i < 3; i++) { 3814 if (sc->chainmask & (1 << i)) { 3815 /* Compute attenuation (in unit of 1.5dB). */ 3816 delta = (noise - (int32_t)calib->noise[i]) / 30; 3817 /* NB: delta <= 0 */ 3818 /* Limit to [-4.5dB,0]. */ 3819 cmd.gain[i] = MIN(abs(delta), 3); 3820 if (delta < 0) 3821 cmd.gain[i] |= 1 << 2; /* sign bit */ 3822 } 3823 } 3824 DPRINTF(("setting differential gains Ant A/B/C: %x/%x/%x (%x)\n", 3825 cmd.gain[0], cmd.gain[1], cmd.gain[2], sc->chainmask)); 3826 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 3827 } 3828 3829 static int 3830 iwn5000_set_gains(struct iwn_softc *sc) 3831 { 3832 struct iwn_calib_state *calib = &sc->calib; 3833 struct iwn_phy_calib_gain cmd; 3834 int i, ant, div, delta; 3835 3836 /* We collected 20 beacons and !=6050 need a 1.5 factor. */ 3837 div = (sc->hw_type == IWN_HW_REV_TYPE_6050) ? 20 : 30; 3838 3839 memset(&cmd, 0, sizeof cmd); 3840 cmd.code = IWN5000_PHY_CALIB_NOISE_GAIN; 3841 cmd.ngroups = 1; 3842 cmd.isvalid = 1; 3843 /* Get first available RX antenna as referential. */ 3844 ant = IWN_LSB(sc->rxchainmask); 3845 /* Set differential gains for other antennas. */ 3846 for (i = ant + 1; i < 3; i++) { 3847 if (sc->chainmask & (1 << i)) { 3848 /* The delta is relative to antenna "ant". */ 3849 delta = ((int32_t)calib->noise[ant] - 3850 (int32_t)calib->noise[i]) / div; 3851 /* Limit to [-4.5dB,+4.5dB]. */ 3852 cmd.gain[i - 1] = MIN(abs(delta), 3); 3853 if (delta < 0) 3854 cmd.gain[i - 1] |= 1 << 2; /* sign bit */ 3855 } 3856 } 3857 DPRINTF(("setting differential gains: %x/%x (%x)\n", 3858 cmd.gain[0], cmd.gain[1], sc->chainmask)); 3859 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 3860 } 3861 3862 /* 3863 * Tune RF RX sensitivity based on the number of false alarms detected 3864 * during the last beacon period. 3865 */ 3866 static void 3867 iwn_tune_sensitivity(struct iwn_softc *sc, const struct iwn_rx_stats *stats) 3868 { 3869 #define inc(val, inc, max) \ 3870 if ((val) < (max)) { \ 3871 if ((val) < (max) - (inc)) \ 3872 (val) += (inc); \ 3873 else \ 3874 (val) = (max); \ 3875 needs_update = 1; \ 3876 } 3877 #define dec(val, dec, min) \ 3878 if ((val) > (min)) { \ 3879 if ((val) > (min) + (dec)) \ 3880 (val) -= (dec); \ 3881 else \ 3882 (val) = (min); \ 3883 needs_update = 1; \ 3884 } 3885 3886 const struct iwn_sensitivity_limits *limits = sc->limits; 3887 struct iwn_calib_state *calib = &sc->calib; 3888 uint32_t val, rxena, fa; 3889 uint32_t energy[3], energy_min; 3890 uint8_t noise[3], noise_ref; 3891 int i, needs_update = 0; 3892 3893 /* Check that we've been enabled long enough. */ 3894 if ((rxena = le32toh(stats->general.load)) == 0) 3895 return; 3896 3897 /* Compute number of false alarms since last call for OFDM. */ 3898 fa = le32toh(stats->ofdm.bad_plcp) - calib->bad_plcp_ofdm; 3899 fa += le32toh(stats->ofdm.fa) - calib->fa_ofdm; 3900 fa *= 200 * 1024; /* 200TU */ 3901 3902 /* Save counters values for next call. */ 3903 calib->bad_plcp_ofdm = le32toh(stats->ofdm.bad_plcp); 3904 calib->fa_ofdm = le32toh(stats->ofdm.fa); 3905 3906 if (fa > 50 * rxena) { 3907 /* High false alarm count, decrease sensitivity. */ 3908 DPRINTFN(2, ("OFDM high false alarm count: %u\n", fa)); 3909 inc(calib->ofdm_x1, 1, limits->max_ofdm_x1); 3910 inc(calib->ofdm_mrc_x1, 1, limits->max_ofdm_mrc_x1); 3911 inc(calib->ofdm_x4, 1, limits->max_ofdm_x4); 3912 inc(calib->ofdm_mrc_x4, 1, limits->max_ofdm_mrc_x4); 3913 3914 } else if (fa < 5 * rxena) { 3915 /* Low false alarm count, increase sensitivity. */ 3916 DPRINTFN(2, ("OFDM low false alarm count: %u\n", fa)); 3917 dec(calib->ofdm_x1, 1, limits->min_ofdm_x1); 3918 dec(calib->ofdm_mrc_x1, 1, limits->min_ofdm_mrc_x1); 3919 dec(calib->ofdm_x4, 1, limits->min_ofdm_x4); 3920 dec(calib->ofdm_mrc_x4, 1, limits->min_ofdm_mrc_x4); 3921 } 3922 3923 /* Compute maximum noise among 3 receivers. */ 3924 for (i = 0; i < 3; i++) 3925 noise[i] = (le32toh(stats->general.noise[i]) >> 8) & 0xff; 3926 val = MAX(noise[0], noise[1]); 3927 val = MAX(noise[2], val); 3928 /* Insert it into our samples table. */ 3929 calib->noise_samples[calib->cur_noise_sample] = val; 3930 calib->cur_noise_sample = (calib->cur_noise_sample + 1) % 20; 3931 3932 /* Compute maximum noise among last 20 samples. */ 3933 noise_ref = calib->noise_samples[0]; 3934 for (i = 1; i < 20; i++) 3935 noise_ref = MAX(noise_ref, calib->noise_samples[i]); 3936 3937 /* Compute maximum energy among 3 receivers. */ 3938 for (i = 0; i < 3; i++) 3939 energy[i] = le32toh(stats->general.energy[i]); 3940 val = MIN(energy[0], energy[1]); 3941 val = MIN(energy[2], val); 3942 /* Insert it into our samples table. */ 3943 calib->energy_samples[calib->cur_energy_sample] = val; 3944 calib->cur_energy_sample = (calib->cur_energy_sample + 1) % 10; 3945 3946 /* Compute minimum energy among last 10 samples. */ 3947 energy_min = calib->energy_samples[0]; 3948 for (i = 1; i < 10; i++) 3949 energy_min = MAX(energy_min, calib->energy_samples[i]); 3950 energy_min += 6; 3951 3952 /* Compute number of false alarms since last call for CCK. */ 3953 fa = le32toh(stats->cck.bad_plcp) - calib->bad_plcp_cck; 3954 fa += le32toh(stats->cck.fa) - calib->fa_cck; 3955 fa *= 200 * 1024; /* 200TU */ 3956 3957 /* Save counters values for next call. */ 3958 calib->bad_plcp_cck = le32toh(stats->cck.bad_plcp); 3959 calib->fa_cck = le32toh(stats->cck.fa); 3960 3961 if (fa > 50 * rxena) { 3962 /* High false alarm count, decrease sensitivity. */ 3963 DPRINTFN(2, ("CCK high false alarm count: %u\n", fa)); 3964 calib->cck_state = IWN_CCK_STATE_HIFA; 3965 calib->low_fa = 0; 3966 3967 if (calib->cck_x4 > 160) { 3968 calib->noise_ref = noise_ref; 3969 if (calib->energy_cck > 2) 3970 dec(calib->energy_cck, 2, energy_min); 3971 } 3972 if (calib->cck_x4 < 160) { 3973 calib->cck_x4 = 161; 3974 needs_update = 1; 3975 } else 3976 inc(calib->cck_x4, 3, limits->max_cck_x4); 3977 3978 inc(calib->cck_mrc_x4, 3, limits->max_cck_mrc_x4); 3979 3980 } else if (fa < 5 * rxena) { 3981 /* Low false alarm count, increase sensitivity. */ 3982 DPRINTFN(2, ("CCK low false alarm count: %u\n", fa)); 3983 calib->cck_state = IWN_CCK_STATE_LOFA; 3984 calib->low_fa++; 3985 3986 if (calib->cck_state != IWN_CCK_STATE_INIT && 3987 (((int32_t)calib->noise_ref - (int32_t)noise_ref) > 2 || 3988 calib->low_fa > 100)) { 3989 inc(calib->energy_cck, 2, limits->min_energy_cck); 3990 dec(calib->cck_x4, 3, limits->min_cck_x4); 3991 dec(calib->cck_mrc_x4, 3, limits->min_cck_mrc_x4); 3992 } 3993 } else { 3994 /* Not worth to increase or decrease sensitivity. */ 3995 DPRINTFN(2, ("CCK normal false alarm count: %u\n", fa)); 3996 calib->low_fa = 0; 3997 calib->noise_ref = noise_ref; 3998 3999 if (calib->cck_state == IWN_CCK_STATE_HIFA) { 4000 /* Previous interval had many false alarms. */ 4001 dec(calib->energy_cck, 8, energy_min); 4002 } 4003 calib->cck_state = IWN_CCK_STATE_INIT; 4004 } 4005 4006 if (needs_update) 4007 (void)iwn_send_sensitivity(sc); 4008 #undef dec 4009 #undef inc 4010 } 4011 4012 static int 4013 iwn_send_sensitivity(struct iwn_softc *sc) 4014 { 4015 struct iwn_calib_state *calib = &sc->calib; 4016 struct iwn_sensitivity_cmd cmd; 4017 4018 memset(&cmd, 0, sizeof cmd); 4019 cmd.which = IWN_SENSITIVITY_WORKTBL; 4020 /* OFDM modulation. */ 4021 cmd.corr_ofdm_x1 = htole16(calib->ofdm_x1); 4022 cmd.corr_ofdm_mrc_x1 = htole16(calib->ofdm_mrc_x1); 4023 cmd.corr_ofdm_x4 = htole16(calib->ofdm_x4); 4024 cmd.corr_ofdm_mrc_x4 = htole16(calib->ofdm_mrc_x4); 4025 cmd.energy_ofdm = htole16(sc->limits->energy_ofdm); 4026 cmd.energy_ofdm_th = htole16(62); 4027 /* CCK modulation. */ 4028 cmd.corr_cck_x4 = htole16(calib->cck_x4); 4029 cmd.corr_cck_mrc_x4 = htole16(calib->cck_mrc_x4); 4030 cmd.energy_cck = htole16(calib->energy_cck); 4031 /* Barker modulation: use default values. */ 4032 cmd.corr_barker = htole16(190); 4033 cmd.corr_barker_mrc = htole16(390); 4034 4035 DPRINTFN(2, ("setting sensitivity %d/%d/%d/%d/%d/%d/%d\n", 4036 calib->ofdm_x1, calib->ofdm_mrc_x1, calib->ofdm_x4, 4037 calib->ofdm_mrc_x4, calib->cck_x4, calib->cck_mrc_x4, 4038 calib->energy_cck)); 4039 return iwn_cmd(sc, IWN_CMD_SET_SENSITIVITY, &cmd, sizeof cmd, 1); 4040 } 4041 4042 /* 4043 * Set STA mode power saving level (between 0 and 5). 4044 * Level 0 is CAM (Continuously Aware Mode), 5 is for maximum power saving. 4045 */ 4046 static int 4047 iwn_set_pslevel(struct iwn_softc *sc, int dtim, int level, int async) 4048 { 4049 struct iwn_pmgt_cmd cmd; 4050 const struct iwn_pmgt *pmgt; 4051 uint32_t maxp, skip_dtim; 4052 pcireg_t reg; 4053 int i; 4054 4055 /* Select which PS parameters to use. */ 4056 if (dtim <= 2) 4057 pmgt = &iwn_pmgt[0][level]; 4058 else if (dtim <= 10) 4059 pmgt = &iwn_pmgt[1][level]; 4060 else 4061 pmgt = &iwn_pmgt[2][level]; 4062 4063 memset(&cmd, 0, sizeof cmd); 4064 if (level != 0) /* not CAM */ 4065 cmd.flags |= htole16(IWN_PS_ALLOW_SLEEP); 4066 if (level == 5) 4067 cmd.flags |= htole16(IWN_PS_FAST_PD); 4068 /* Retrieve PCIe Active State Power Management (ASPM). */ 4069 reg = pci_conf_read(sc->sc_pct, sc->sc_pcitag, 4070 sc->sc_cap_off + PCI_PCIE_LCSR); 4071 if (!(reg & PCI_PCIE_LCSR_ASPM_L0S)) /* L0s Entry disabled. */ 4072 cmd.flags |= htole16(IWN_PS_PCI_PMGT); 4073 cmd.rxtimeout = htole32(pmgt->rxtimeout * 1024); 4074 cmd.txtimeout = htole32(pmgt->txtimeout * 1024); 4075 4076 if (dtim == 0) { 4077 dtim = 1; 4078 skip_dtim = 0; 4079 } else 4080 skip_dtim = pmgt->skip_dtim; 4081 if (skip_dtim != 0) { 4082 cmd.flags |= htole16(IWN_PS_SLEEP_OVER_DTIM); 4083 maxp = pmgt->intval[4]; 4084 if (maxp == (uint32_t)-1) 4085 maxp = dtim * (skip_dtim + 1); 4086 else if (maxp > dtim) 4087 maxp = (maxp / dtim) * dtim; 4088 } else 4089 maxp = dtim; 4090 for (i = 0; i < 5; i++) 4091 cmd.intval[i] = htole32(MIN(maxp, pmgt->intval[i])); 4092 4093 DPRINTF(("setting power saving level to %d\n", level)); 4094 return iwn_cmd(sc, IWN_CMD_SET_POWER_MODE, &cmd, sizeof cmd, async); 4095 } 4096 4097 int 4098 iwn5000_runtime_calib(struct iwn_softc *sc) 4099 { 4100 struct iwn5000_calib_config cmd; 4101 4102 memset(&cmd, 0, sizeof cmd); 4103 cmd.ucode.once.enable = 0xffffffff; 4104 cmd.ucode.once.start = IWN5000_CALIB_DC; 4105 DPRINTF(("configuring runtime calibration\n")); 4106 return iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof(cmd), 0); 4107 } 4108 4109 static int 4110 iwn_config(struct iwn_softc *sc) 4111 { 4112 struct iwn_ops *ops = &sc->ops; 4113 struct ieee80211com *ic = &sc->sc_ic; 4114 struct ifnet *ifp = ic->ic_ifp; 4115 struct iwn_bluetooth bluetooth; 4116 uint32_t txmask; 4117 uint16_t rxchain; 4118 int error; 4119 4120 if (sc->hw_type == IWN_HW_REV_TYPE_6050 || 4121 sc->hw_type == IWN_HW_REV_TYPE_6005) { 4122 /* Configure runtime DC calibration. */ 4123 error = iwn5000_runtime_calib(sc); 4124 if (error != 0) { 4125 aprint_error_dev(sc->sc_dev, 4126 "could not configure runtime calibration\n"); 4127 return error; 4128 } 4129 } 4130 4131 /* Configure valid TX chains for 5000 Series. */ 4132 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4133 txmask = htole32(sc->txchainmask); 4134 DPRINTF(("configuring valid TX chains 0x%x\n", txmask)); 4135 error = iwn_cmd(sc, IWN5000_CMD_TX_ANT_CONFIG, &txmask, 4136 sizeof txmask, 0); 4137 if (error != 0) { 4138 aprint_error_dev(sc->sc_dev, 4139 "could not configure valid TX chains\n"); 4140 return error; 4141 } 4142 } 4143 4144 /* Configure bluetooth coexistence. */ 4145 memset(&bluetooth, 0, sizeof bluetooth); 4146 bluetooth.flags = IWN_BT_COEX_CHAN_ANN | IWN_BT_COEX_BT_PRIO; 4147 bluetooth.lead_time = IWN_BT_LEAD_TIME_DEF; 4148 bluetooth.max_kill = IWN_BT_MAX_KILL_DEF; 4149 DPRINTF(("configuring bluetooth coexistence\n")); 4150 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &bluetooth, sizeof bluetooth, 0); 4151 if (error != 0) { 4152 aprint_error_dev(sc->sc_dev, 4153 "could not configure bluetooth coexistence\n"); 4154 return error; 4155 } 4156 4157 /* Set mode, channel, RX filter and enable RX. */ 4158 memset(&sc->rxon, 0, sizeof (struct iwn_rxon)); 4159 IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl)); 4160 IEEE80211_ADDR_COPY(sc->rxon.myaddr, ic->ic_myaddr); 4161 IEEE80211_ADDR_COPY(sc->rxon.wlap, ic->ic_myaddr); 4162 sc->rxon.chan = ieee80211_chan2ieee(ic, ic->ic_ibss_chan); 4163 sc->rxon.flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 4164 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_ibss_chan)) 4165 sc->rxon.flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 4166 switch (ic->ic_opmode) { 4167 case IEEE80211_M_STA: 4168 sc->rxon.mode = IWN_MODE_STA; 4169 sc->rxon.filter = htole32(IWN_FILTER_MULTICAST); 4170 break; 4171 case IEEE80211_M_MONITOR: 4172 sc->rxon.mode = IWN_MODE_MONITOR; 4173 sc->rxon.filter = htole32(IWN_FILTER_MULTICAST | 4174 IWN_FILTER_CTL | IWN_FILTER_PROMISC); 4175 break; 4176 default: 4177 /* Should not get there. */ 4178 break; 4179 } 4180 sc->rxon.cck_mask = 0x0f; /* not yet negotiated */ 4181 sc->rxon.ofdm_mask = 0xff; /* not yet negotiated */ 4182 sc->rxon.ht_single_mask = 0xff; 4183 sc->rxon.ht_dual_mask = 0xff; 4184 sc->rxon.ht_triple_mask = 0xff; 4185 rxchain = 4186 IWN_RXCHAIN_VALID(sc->rxchainmask) | 4187 IWN_RXCHAIN_MIMO_COUNT(2) | 4188 IWN_RXCHAIN_IDLE_COUNT(2); 4189 sc->rxon.rxchain = htole16(rxchain); 4190 DPRINTF(("setting configuration\n")); 4191 error = iwn_cmd(sc, IWN_CMD_RXON, &sc->rxon, sc->rxonsz, 0); 4192 if (error != 0) { 4193 aprint_error_dev(sc->sc_dev, 4194 "RXON command failed\n"); 4195 return error; 4196 } 4197 4198 if ((error = iwn_add_broadcast_node(sc, 0)) != 0) { 4199 aprint_error_dev(sc->sc_dev, 4200 "could not add broadcast node\n"); 4201 return error; 4202 } 4203 4204 /* Configuration has changed, set TX power accordingly. */ 4205 if ((error = ops->set_txpower(sc, 0)) != 0) { 4206 aprint_error_dev(sc->sc_dev, 4207 "could not set TX power\n"); 4208 return error; 4209 } 4210 4211 if ((error = iwn_set_critical_temp(sc)) != 0) { 4212 aprint_error_dev(sc->sc_dev, 4213 "could not set critical temperature\n"); 4214 return error; 4215 } 4216 4217 /* Set power saving level to CAM during initialization. */ 4218 if ((error = iwn_set_pslevel(sc, 0, 0, 0)) != 0) { 4219 aprint_error_dev(sc->sc_dev, 4220 "could not set power saving level\n"); 4221 return error; 4222 } 4223 return 0; 4224 } 4225 4226 static int 4227 iwn_scan(struct iwn_softc *sc, uint16_t flags) 4228 { 4229 struct ieee80211com *ic = &sc->sc_ic; 4230 struct iwn_scan_hdr *hdr; 4231 struct iwn_cmd_data *tx; 4232 struct iwn_scan_essid *essid; 4233 struct iwn_scan_chan *chan; 4234 struct ieee80211_frame *wh; 4235 struct ieee80211_rateset *rs; 4236 struct ieee80211_channel *c; 4237 uint8_t *buf, *frm; 4238 uint16_t rxchain; 4239 uint8_t txant; 4240 int buflen, error; 4241 4242 buf = malloc(IWN_SCAN_MAXSZ, M_DEVBUF, M_NOWAIT | M_ZERO); 4243 if (buf == NULL) { 4244 aprint_error_dev(sc->sc_dev, 4245 "could not allocate buffer for scan command\n"); 4246 return ENOMEM; 4247 } 4248 hdr = (struct iwn_scan_hdr *)buf; 4249 /* 4250 * Move to the next channel if no frames are received within 10ms 4251 * after sending the probe request. 4252 */ 4253 hdr->quiet_time = htole16(10); /* timeout in milliseconds */ 4254 hdr->quiet_threshold = htole16(1); /* min # of packets */ 4255 4256 /* Select antennas for scanning. */ 4257 rxchain = 4258 IWN_RXCHAIN_VALID(sc->rxchainmask) | 4259 IWN_RXCHAIN_FORCE_MIMO_SEL(sc->rxchainmask) | 4260 IWN_RXCHAIN_DRIVER_FORCE; 4261 if ((flags & IEEE80211_CHAN_5GHZ) && 4262 sc->hw_type == IWN_HW_REV_TYPE_4965) { 4263 /* Ant A must be avoided in 5GHz because of an HW bug. */ 4264 rxchain |= IWN_RXCHAIN_FORCE_SEL(IWN_ANT_BC); 4265 } else /* Use all available RX antennas. */ 4266 rxchain |= IWN_RXCHAIN_FORCE_SEL(sc->rxchainmask); 4267 hdr->rxchain = htole16(rxchain); 4268 hdr->filter = htole32(IWN_FILTER_MULTICAST | IWN_FILTER_BEACON); 4269 4270 tx = (struct iwn_cmd_data *)(hdr + 1); 4271 tx->flags = htole32(IWN_TX_AUTO_SEQ); 4272 tx->id = sc->broadcast_id; 4273 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4274 4275 if (flags & IEEE80211_CHAN_5GHZ) { 4276 hdr->crc_threshold = 0xffff; 4277 /* Send probe requests at 6Mbps. */ 4278 tx->plcp = iwn_rates[IWN_RIDX_OFDM6].plcp; 4279 rs = &ic->ic_sup_rates[IEEE80211_MODE_11A]; 4280 } else { 4281 hdr->flags = htole32(IWN_RXON_24GHZ | IWN_RXON_AUTO); 4282 /* Send probe requests at 1Mbps. */ 4283 tx->plcp = iwn_rates[IWN_RIDX_CCK1].plcp; 4284 tx->rflags = IWN_RFLAG_CCK; 4285 rs = &ic->ic_sup_rates[IEEE80211_MODE_11G]; 4286 } 4287 /* Use the first valid TX antenna. */ 4288 txant = IWN_LSB(sc->txchainmask); 4289 tx->rflags |= IWN_RFLAG_ANT(txant); 4290 4291 essid = (struct iwn_scan_essid *)(tx + 1); 4292 if (ic->ic_des_esslen != 0) { 4293 essid[0].id = IEEE80211_ELEMID_SSID; 4294 essid[0].len = ic->ic_des_esslen; 4295 memcpy(essid[0].data, ic->ic_des_essid, ic->ic_des_esslen); 4296 } 4297 /* 4298 * Build a probe request frame. Most of the following code is a 4299 * copy & paste of what is done in net80211. 4300 */ 4301 wh = (struct ieee80211_frame *)(essid + 20); 4302 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 4303 IEEE80211_FC0_SUBTYPE_PROBE_REQ; 4304 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 4305 IEEE80211_ADDR_COPY(wh->i_addr1, etherbroadcastaddr); 4306 IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); 4307 IEEE80211_ADDR_COPY(wh->i_addr3, etherbroadcastaddr); 4308 *(uint16_t *)&wh->i_dur[0] = 0; /* filled by HW */ 4309 *(uint16_t *)&wh->i_seq[0] = 0; /* filled by HW */ 4310 4311 frm = (uint8_t *)(wh + 1); 4312 frm = ieee80211_add_ssid(frm, NULL, 0); 4313 frm = ieee80211_add_rates(frm, rs); 4314 #ifndef IEEE80211_NO_HT 4315 if (ic->ic_flags & IEEE80211_F_HTON) 4316 frm = ieee80211_add_htcaps(frm, ic); 4317 #endif 4318 if (rs->rs_nrates > IEEE80211_RATE_SIZE) 4319 frm = ieee80211_add_xrates(frm, rs); 4320 4321 /* Set length of probe request. */ 4322 tx->len = htole16(frm - (uint8_t *)wh); 4323 4324 chan = (struct iwn_scan_chan *)frm; 4325 for (c = &ic->ic_channels[1]; 4326 c <= &ic->ic_channels[IEEE80211_CHAN_MAX]; c++) { 4327 if ((c->ic_flags & flags) != flags) 4328 continue; 4329 4330 chan->chan = htole16(ieee80211_chan2ieee(ic, c)); 4331 DPRINTFN(2, ("adding channel %d\n", chan->chan)); 4332 chan->flags = 0; 4333 if (!(c->ic_flags & IEEE80211_CHAN_PASSIVE)) 4334 chan->flags |= htole32(IWN_CHAN_ACTIVE); 4335 if (ic->ic_des_esslen != 0) 4336 chan->flags |= htole32(IWN_CHAN_NPBREQS(1)); 4337 chan->dsp_gain = 0x6e; 4338 if (IEEE80211_IS_CHAN_5GHZ(c)) { 4339 chan->rf_gain = 0x3b; 4340 chan->active = htole16(24); 4341 chan->passive = htole16(110); 4342 } else { 4343 chan->rf_gain = 0x28; 4344 chan->active = htole16(36); 4345 chan->passive = htole16(120); 4346 } 4347 hdr->nchan++; 4348 chan++; 4349 } 4350 4351 buflen = (uint8_t *)chan - buf; 4352 hdr->len = htole16(buflen); 4353 4354 DPRINTF(("sending scan command nchan=%d\n", hdr->nchan)); 4355 error = iwn_cmd(sc, IWN_CMD_SCAN, buf, buflen, 1); 4356 free(buf, M_DEVBUF); 4357 return error; 4358 } 4359 4360 static int 4361 iwn_auth(struct iwn_softc *sc) 4362 { 4363 struct iwn_ops *ops = &sc->ops; 4364 struct ieee80211com *ic = &sc->sc_ic; 4365 struct ieee80211_node *ni = ic->ic_bss; 4366 int error; 4367 4368 /* Update adapter configuration. */ 4369 IEEE80211_ADDR_COPY(sc->rxon.bssid, ni->ni_bssid); 4370 sc->rxon.chan = ieee80211_chan2ieee(ic, ni->ni_chan); 4371 sc->rxon.flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 4372 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 4373 sc->rxon.flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 4374 if (ic->ic_flags & IEEE80211_F_SHSLOT) 4375 sc->rxon.flags |= htole32(IWN_RXON_SHSLOT); 4376 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 4377 sc->rxon.flags |= htole32(IWN_RXON_SHPREAMBLE); 4378 switch (ic->ic_curmode) { 4379 case IEEE80211_MODE_11A: 4380 sc->rxon.cck_mask = 0; 4381 sc->rxon.ofdm_mask = 0x15; 4382 break; 4383 case IEEE80211_MODE_11B: 4384 sc->rxon.cck_mask = 0x03; 4385 sc->rxon.ofdm_mask = 0; 4386 break; 4387 default: /* Assume 802.11b/g. */ 4388 sc->rxon.cck_mask = 0x0f; 4389 sc->rxon.ofdm_mask = 0x15; 4390 } 4391 DPRINTF(("rxon chan %d flags %x cck %x ofdm %x\n", sc->rxon.chan, 4392 sc->rxon.flags, sc->rxon.cck_mask, sc->rxon.ofdm_mask)); 4393 error = iwn_cmd(sc, IWN_CMD_RXON, &sc->rxon, sc->rxonsz, 1); 4394 if (error != 0) { 4395 aprint_error_dev(sc->sc_dev, 4396 "RXON command failed\n"); 4397 return error; 4398 } 4399 4400 /* Configuration has changed, set TX power accordingly. */ 4401 if ((error = ops->set_txpower(sc, 1)) != 0) { 4402 aprint_error_dev(sc->sc_dev, 4403 "could not set TX power\n"); 4404 return error; 4405 } 4406 /* 4407 * Reconfiguring RXON clears the firmware nodes table so we must 4408 * add the broadcast node again. 4409 */ 4410 if ((error = iwn_add_broadcast_node(sc, 1)) != 0) { 4411 aprint_error_dev(sc->sc_dev, 4412 "could not add broadcast node\n"); 4413 return error; 4414 } 4415 return 0; 4416 } 4417 4418 static int 4419 iwn_run(struct iwn_softc *sc) 4420 { 4421 struct iwn_ops *ops = &sc->ops; 4422 struct ieee80211com *ic = &sc->sc_ic; 4423 struct ieee80211_node *ni = ic->ic_bss; 4424 struct iwn_node_info node; 4425 int error; 4426 4427 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 4428 /* Link LED blinks while monitoring. */ 4429 iwn_set_led(sc, IWN_LED_LINK, 5, 5); 4430 return 0; 4431 } 4432 if ((error = iwn_set_timing(sc, ni)) != 0) { 4433 aprint_error_dev(sc->sc_dev, 4434 "could not set timing\n"); 4435 return error; 4436 } 4437 4438 /* Update adapter configuration. */ 4439 sc->rxon.associd = htole16(IEEE80211_AID(ni->ni_associd)); 4440 /* Short preamble and slot time are negotiated when associating. */ 4441 sc->rxon.flags &= ~htole32(IWN_RXON_SHPREAMBLE | IWN_RXON_SHSLOT); 4442 if (ic->ic_flags & IEEE80211_F_SHSLOT) 4443 sc->rxon.flags |= htole32(IWN_RXON_SHSLOT); 4444 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 4445 sc->rxon.flags |= htole32(IWN_RXON_SHPREAMBLE); 4446 sc->rxon.filter |= htole32(IWN_FILTER_BSS); 4447 DPRINTF(("rxon chan %d flags %x\n", sc->rxon.chan, sc->rxon.flags)); 4448 error = iwn_cmd(sc, IWN_CMD_RXON, &sc->rxon, sc->rxonsz, 1); 4449 if (error != 0) { 4450 aprint_error_dev(sc->sc_dev, 4451 "could not update configuration\n"); 4452 return error; 4453 } 4454 4455 /* Configuration has changed, set TX power accordingly. */ 4456 if ((error = ops->set_txpower(sc, 1)) != 0) { 4457 aprint_error_dev(sc->sc_dev, 4458 "could not set TX power\n"); 4459 return error; 4460 } 4461 4462 /* Fake a join to initialize the TX rate. */ 4463 ((struct iwn_node *)ni)->id = IWN_ID_BSS; 4464 iwn_newassoc(ni, 1); 4465 4466 /* Add BSS node. */ 4467 memset(&node, 0, sizeof node); 4468 IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr); 4469 node.id = IWN_ID_BSS; 4470 #ifdef notyet 4471 node.htflags = htole32(IWN_AMDPU_SIZE_FACTOR(3) | 4472 IWN_AMDPU_DENSITY(5)); /* 2us */ 4473 #endif 4474 DPRINTF(("adding BSS node\n")); 4475 error = ops->add_node(sc, &node, 1); 4476 if (error != 0) { 4477 aprint_error_dev(sc->sc_dev, 4478 "could not add BSS node\n"); 4479 return error; 4480 } 4481 DPRINTF(("setting link quality for node %d\n", node.id)); 4482 if ((error = iwn_set_link_quality(sc, ni)) != 0) { 4483 aprint_error_dev(sc->sc_dev, 4484 "could not setup link quality for node %d\n", node.id); 4485 return error; 4486 } 4487 4488 if ((error = iwn_init_sensitivity(sc)) != 0) { 4489 aprint_error_dev(sc->sc_dev, 4490 "could not set sensitivity\n"); 4491 return error; 4492 } 4493 /* Start periodic calibration timer. */ 4494 sc->calib.state = IWN_CALIB_STATE_ASSOC; 4495 sc->calib_cnt = 0; 4496 callout_schedule(&sc->calib_to, hz/2); 4497 4498 /* Link LED always on while associated. */ 4499 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 4500 return 0; 4501 } 4502 4503 #ifdef IWN_HWCRYPTO 4504 /* 4505 * We support CCMP hardware encryption/decryption of unicast frames only. 4506 * HW support for TKIP really sucks. We should let TKIP die anyway. 4507 */ 4508 static int 4509 iwn_set_key(struct ieee80211com *ic, struct ieee80211_node *ni, 4510 struct ieee80211_key *k) 4511 { 4512 struct iwn_softc *sc = ic->ic_softc; 4513 struct iwn_ops *ops = &sc->ops; 4514 struct iwn_node *wn = (void *)ni; 4515 struct iwn_node_info node; 4516 uint16_t kflags; 4517 4518 if ((k->k_flags & IEEE80211_KEY_GROUP) || 4519 k->k_cipher != IEEE80211_CIPHER_CCMP) 4520 return ieee80211_set_key(ic, ni, k); 4521 4522 kflags = IWN_KFLAG_CCMP | IWN_KFLAG_MAP | IWN_KFLAG_KID(k->k_id); 4523 if (k->k_flags & IEEE80211_KEY_GROUP) 4524 kflags |= IWN_KFLAG_GROUP; 4525 4526 memset(&node, 0, sizeof node); 4527 node.id = (k->k_flags & IEEE80211_KEY_GROUP) ? 4528 sc->broadcast_id : wn->id; 4529 node.control = IWN_NODE_UPDATE; 4530 node.flags = IWN_FLAG_SET_KEY; 4531 node.kflags = htole16(kflags); 4532 node.kid = k->k_id; 4533 memcpy(node.key, k->k_key, k->k_len); 4534 DPRINTF(("set key id=%d for node %d\n", k->k_id, node.id)); 4535 return ops->add_node(sc, &node, 1); 4536 } 4537 4538 static void 4539 iwn_delete_key(struct ieee80211com *ic, struct ieee80211_node *ni, 4540 struct ieee80211_key *k) 4541 { 4542 struct iwn_softc *sc = ic->ic_softc; 4543 struct iwn_ops *ops = &sc->ops; 4544 struct iwn_node *wn = (void *)ni; 4545 struct iwn_node_info node; 4546 4547 if ((k->k_flags & IEEE80211_KEY_GROUP) || 4548 k->k_cipher != IEEE80211_CIPHER_CCMP) { 4549 /* See comment about other ciphers above. */ 4550 ieee80211_delete_key(ic, ni, k); 4551 return; 4552 } 4553 if (ic->ic_state != IEEE80211_S_RUN) 4554 return; /* Nothing to do. */ 4555 memset(&node, 0, sizeof node); 4556 node.id = (k->k_flags & IEEE80211_KEY_GROUP) ? 4557 sc->broadcast_id : wn->id; 4558 node.control = IWN_NODE_UPDATE; 4559 node.flags = IWN_FLAG_SET_KEY; 4560 node.kflags = htole16(IWN_KFLAG_INVALID); 4561 node.kid = 0xff; 4562 DPRINTF(("delete keys for node %d\n", node.id)); 4563 (void)ops->add_node(sc, &node, 1); 4564 } 4565 #endif 4566 4567 /* XXX Added for NetBSD (copied from rev 1.39). */ 4568 4569 static int 4570 iwn_wme_update(struct ieee80211com *ic) 4571 { 4572 #define IWN_EXP2(v) htole16((1 << (v)) - 1) 4573 #define IWN_USEC(v) htole16(IEEE80211_TXOP_TO_US(v)) 4574 struct iwn_softc *sc = ic->ic_ifp->if_softc; 4575 const struct wmeParams *wmep; 4576 struct iwn_edca_params cmd; 4577 int ac; 4578 4579 /* don't override default WME values if WME is not actually enabled */ 4580 if (!(ic->ic_flags & IEEE80211_F_WME)) 4581 return 0; 4582 cmd.flags = 0; 4583 for (ac = 0; ac < WME_NUM_AC; ac++) { 4584 wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac]; 4585 cmd.ac[ac].aifsn = wmep->wmep_aifsn; 4586 cmd.ac[ac].cwmin = IWN_EXP2(wmep->wmep_logcwmin); 4587 cmd.ac[ac].cwmax = IWN_EXP2(wmep->wmep_logcwmax); 4588 cmd.ac[ac].txoplimit = IWN_USEC(wmep->wmep_txopLimit); 4589 4590 DPRINTF(("setting WME for queue %d aifsn=%d cwmin=%d cwmax=%d " 4591 "txop=%d\n", ac, cmd.ac[ac].aifsn, 4592 cmd.ac[ac].cwmin, 4593 cmd.ac[ac].cwmax, cmd.ac[ac].txoplimit)); 4594 } 4595 return iwn_cmd(sc, IWN_CMD_EDCA_PARAMS, &cmd, sizeof cmd, 1); 4596 #undef IWN_USEC 4597 #undef IWN_EXP2 4598 } 4599 4600 #ifndef IEEE80211_NO_HT 4601 /* 4602 * This function is called by upper layer when an ADDBA request is received 4603 * from another STA and before the ADDBA response is sent. 4604 */ 4605 static int 4606 iwn_ampdu_rx_start(struct ieee80211com *ic, struct ieee80211_node *ni, 4607 uint8_t tid) 4608 { 4609 struct ieee80211_rx_ba *ba = &ni->ni_rx_ba[tid]; 4610 struct iwn_softc *sc = ic->ic_softc; 4611 struct iwn_ops *ops = &sc->ops; 4612 struct iwn_node *wn = (void *)ni; 4613 struct iwn_node_info node; 4614 4615 memset(&node, 0, sizeof node); 4616 node.id = wn->id; 4617 node.control = IWN_NODE_UPDATE; 4618 node.flags = IWN_FLAG_SET_ADDBA; 4619 node.addba_tid = tid; 4620 node.addba_ssn = htole16(ba->ba_winstart); 4621 DPRINTFN(2, ("ADDBA RA=%d TID=%d SSN=%d\n", wn->id, tid, 4622 ba->ba_winstart)); 4623 return ops->add_node(sc, &node, 1); 4624 } 4625 4626 /* 4627 * This function is called by upper layer on teardown of an HT-immediate 4628 * Block Ack agreement (eg. uppon receipt of a DELBA frame). 4629 */ 4630 static void 4631 iwn_ampdu_rx_stop(struct ieee80211com *ic, struct ieee80211_node *ni, 4632 uint8_t tid) 4633 { 4634 struct iwn_softc *sc = ic->ic_softc; 4635 struct iwn_ops *ops = &sc->ops; 4636 struct iwn_node *wn = (void *)ni; 4637 struct iwn_node_info node; 4638 4639 memset(&node, 0, sizeof node); 4640 node.id = wn->id; 4641 node.control = IWN_NODE_UPDATE; 4642 node.flags = IWN_FLAG_SET_DELBA; 4643 node.delba_tid = tid; 4644 DPRINTFN(2, ("DELBA RA=%d TID=%d\n", wn->id, tid)); 4645 (void)ops->add_node(sc, &node, 1); 4646 } 4647 4648 /* 4649 * This function is called by upper layer when an ADDBA response is received 4650 * from another STA. 4651 */ 4652 static int 4653 iwn_ampdu_tx_start(struct ieee80211com *ic, struct ieee80211_node *ni, 4654 uint8_t tid) 4655 { 4656 struct ieee80211_tx_ba *ba = &ni->ni_tx_ba[tid]; 4657 struct iwn_softc *sc = ic->ic_softc; 4658 struct iwn_ops *ops = &sc->ops; 4659 struct iwn_node *wn = (void *)ni; 4660 struct iwn_node_info node; 4661 int error; 4662 4663 /* Enable TX for the specified RA/TID. */ 4664 wn->disable_tid &= ~(1 << tid); 4665 memset(&node, 0, sizeof node); 4666 node.id = wn->id; 4667 node.control = IWN_NODE_UPDATE; 4668 node.flags = IWN_FLAG_SET_DISABLE_TID; 4669 node.disable_tid = htole16(wn->disable_tid); 4670 error = ops->add_node(sc, &node, 1); 4671 if (error != 0) 4672 return error; 4673 4674 if ((error = iwn_nic_lock(sc)) != 0) 4675 return error; 4676 ops->ampdu_tx_start(sc, ni, tid, ba->ba_winstart); 4677 iwn_nic_unlock(sc); 4678 return 0; 4679 } 4680 4681 static void 4682 iwn_ampdu_tx_stop(struct ieee80211com *ic, struct ieee80211_node *ni, 4683 uint8_t tid) 4684 { 4685 struct ieee80211_tx_ba *ba = &ni->ni_tx_ba[tid]; 4686 struct iwn_softc *sc = ic->ic_softc; 4687 struct iwn_ops *ops = &sc->ops; 4688 4689 if (iwn_nic_lock(sc) != 0) 4690 return; 4691 ops->ampdu_tx_stop(sc, tid, ba->ba_winstart); 4692 iwn_nic_unlock(sc); 4693 } 4694 4695 static void 4696 iwn4965_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 4697 uint8_t tid, uint16_t ssn) 4698 { 4699 struct iwn_node *wn = (void *)ni; 4700 int qid = 7 + tid; 4701 4702 /* Stop TX scheduler while we're changing its configuration. */ 4703 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 4704 IWN4965_TXQ_STATUS_CHGACT); 4705 4706 /* Assign RA/TID translation to the queue. */ 4707 iwn_mem_write_2(sc, sc->sched_base + IWN4965_SCHED_TRANS_TBL(qid), 4708 wn->id << 4 | tid); 4709 4710 /* Enable chain-building mode for the queue. */ 4711 iwn_prph_setbits(sc, IWN4965_SCHED_QCHAIN_SEL, 1 << qid); 4712 4713 /* Set starting sequence number from the ADDBA request. */ 4714 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 4715 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 4716 4717 /* Set scheduler window size. */ 4718 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid), 4719 IWN_SCHED_WINSZ); 4720 /* Set scheduler frame limit. */ 4721 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 4722 IWN_SCHED_LIMIT << 16); 4723 4724 /* Enable interrupts for the queue. */ 4725 iwn_prph_setbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 4726 4727 /* Mark the queue as active. */ 4728 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 4729 IWN4965_TXQ_STATUS_ACTIVE | IWN4965_TXQ_STATUS_AGGR_ENA | 4730 iwn_tid2fifo[tid] << 1); 4731 } 4732 4733 static void 4734 iwn4965_ampdu_tx_stop(struct iwn_softc *sc, uint8_t tid, uint16_t ssn) 4735 { 4736 int qid = 7 + tid; 4737 4738 /* Stop TX scheduler while we're changing its configuration. */ 4739 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 4740 IWN4965_TXQ_STATUS_CHGACT); 4741 4742 /* Set starting sequence number from the ADDBA request. */ 4743 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 4744 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 4745 4746 /* Disable interrupts for the queue. */ 4747 iwn_prph_clrbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 4748 4749 /* Mark the queue as inactive. */ 4750 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 4751 IWN4965_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid] << 1); 4752 } 4753 4754 static void 4755 iwn5000_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 4756 uint8_t tid, uint16_t ssn) 4757 { 4758 struct iwn_node *wn = (void *)ni; 4759 int qid = 10 + tid; 4760 4761 /* Stop TX scheduler while we're changing its configuration. */ 4762 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 4763 IWN5000_TXQ_STATUS_CHGACT); 4764 4765 /* Assign RA/TID translation to the queue. */ 4766 iwn_mem_write_2(sc, sc->sched_base + IWN5000_SCHED_TRANS_TBL(qid), 4767 wn->id << 4 | tid); 4768 4769 /* Enable chain-building mode for the queue. */ 4770 iwn_prph_setbits(sc, IWN5000_SCHED_QCHAIN_SEL, 1 << qid); 4771 4772 /* Enable aggregation for the queue. */ 4773 iwn_prph_setbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 4774 4775 /* Set starting sequence number from the ADDBA request. */ 4776 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 4777 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 4778 4779 /* Set scheduler window size and frame limit. */ 4780 iwn_mem_write(sc, sc->sched_base + IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 4781 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 4782 4783 /* Enable interrupts for the queue. */ 4784 iwn_prph_setbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 4785 4786 /* Mark the queue as active. */ 4787 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 4788 IWN5000_TXQ_STATUS_ACTIVE | iwn_tid2fifo[tid]); 4789 } 4790 4791 static void 4792 iwn5000_ampdu_tx_stop(struct iwn_softc *sc, uint8_t tid, uint16_t ssn) 4793 { 4794 int qid = 10 + tid; 4795 4796 /* Stop TX scheduler while we're changing its configuration. */ 4797 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 4798 IWN5000_TXQ_STATUS_CHGACT); 4799 4800 /* Disable aggregation for the queue. */ 4801 iwn_prph_clrbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 4802 4803 /* Set starting sequence number from the ADDBA request. */ 4804 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 4805 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 4806 4807 /* Disable interrupts for the queue. */ 4808 iwn_prph_clrbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 4809 4810 /* Mark the queue as inactive. */ 4811 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 4812 IWN5000_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid]); 4813 } 4814 #endif /* !IEEE80211_NO_HT */ 4815 4816 /* 4817 * Query calibration tables from the initialization firmware. We do this 4818 * only once at first boot. Called from a process context. 4819 */ 4820 static int 4821 iwn5000_query_calibration(struct iwn_softc *sc) 4822 { 4823 struct iwn5000_calib_config cmd; 4824 int error; 4825 4826 memset(&cmd, 0, sizeof cmd); 4827 cmd.ucode.once.enable = 0xffffffff; 4828 cmd.ucode.once.start = 0xffffffff; 4829 cmd.ucode.once.send = 0xffffffff; 4830 cmd.ucode.flags = 0xffffffff; 4831 DPRINTF(("sending calibration query\n")); 4832 error = iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof cmd, 0); 4833 if (error != 0) 4834 return error; 4835 4836 /* Wait at most two seconds for calibration to complete. */ 4837 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) 4838 error = tsleep(sc, PCATCH, "iwncal", 2 * hz); 4839 return error; 4840 } 4841 4842 /* 4843 * Send calibration results to the runtime firmware. These results were 4844 * obtained on first boot from the initialization firmware. 4845 */ 4846 static int 4847 iwn5000_send_calibration(struct iwn_softc *sc) 4848 { 4849 int idx, error; 4850 4851 for (idx = 0; idx < 5; idx++) { 4852 if (sc->calibcmd[idx].buf == NULL) 4853 continue; /* No results available. */ 4854 DPRINTF(("send calibration result idx=%d len=%d\n", 4855 idx, sc->calibcmd[idx].len)); 4856 error = iwn_cmd(sc, IWN_CMD_PHY_CALIB, sc->calibcmd[idx].buf, 4857 sc->calibcmd[idx].len, 0); 4858 if (error != 0) { 4859 aprint_error_dev(sc->sc_dev, 4860 "could not send calibration result\n"); 4861 return error; 4862 } 4863 } 4864 return 0; 4865 } 4866 4867 static int 4868 iwn5000_send_wimax_coex(struct iwn_softc *sc) 4869 { 4870 struct iwn5000_wimax_coex wimax; 4871 4872 #ifdef notyet 4873 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 4874 /* Enable WiMAX coexistence for combo adapters. */ 4875 wimax.flags = 4876 IWN_WIMAX_COEX_ASSOC_WA_UNMASK | 4877 IWN_WIMAX_COEX_UNASSOC_WA_UNMASK | 4878 IWN_WIMAX_COEX_STA_TABLE_VALID | 4879 IWN_WIMAX_COEX_ENABLE; 4880 memcpy(wimax.events, iwn6050_wimax_events, 4881 sizeof iwn6050_wimax_events); 4882 } else 4883 #endif 4884 { 4885 /* Disable WiMAX coexistence. */ 4886 wimax.flags = 0; 4887 memset(wimax.events, 0, sizeof wimax.events); 4888 } 4889 DPRINTF(("Configuring WiMAX coexistence\n")); 4890 return iwn_cmd(sc, IWN5000_CMD_WIMAX_COEX, &wimax, sizeof wimax, 0); 4891 } 4892 4893 /* 4894 * This function is called after the runtime firmware notifies us of its 4895 * readiness (called in a process context). 4896 */ 4897 static int 4898 iwn4965_post_alive(struct iwn_softc *sc) 4899 { 4900 int error, qid; 4901 4902 if ((error = iwn_nic_lock(sc)) != 0) 4903 return error; 4904 4905 /* Clear TX scheduler state in SRAM. */ 4906 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 4907 iwn_mem_set_region_4(sc, sc->sched_base + IWN4965_SCHED_CTX_OFF, 0, 4908 IWN4965_SCHED_CTX_LEN / sizeof (uint32_t)); 4909 4910 /* Set physical address of TX scheduler rings (1KB aligned). */ 4911 iwn_prph_write(sc, IWN4965_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 4912 4913 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 4914 4915 /* Disable chain mode for all our 16 queues. */ 4916 iwn_prph_write(sc, IWN4965_SCHED_QCHAIN_SEL, 0); 4917 4918 for (qid = 0; qid < IWN4965_NTXQUEUES; qid++) { 4919 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), 0); 4920 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 4921 4922 /* Set scheduler window size. */ 4923 iwn_mem_write(sc, sc->sched_base + 4924 IWN4965_SCHED_QUEUE_OFFSET(qid), IWN_SCHED_WINSZ); 4925 /* Set scheduler frame limit. */ 4926 iwn_mem_write(sc, sc->sched_base + 4927 IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 4928 IWN_SCHED_LIMIT << 16); 4929 } 4930 4931 /* Enable interrupts for all our 16 queues. */ 4932 iwn_prph_write(sc, IWN4965_SCHED_INTR_MASK, 0xffff); 4933 /* Identify TX FIFO rings (0-7). */ 4934 iwn_prph_write(sc, IWN4965_SCHED_TXFACT, 0xff); 4935 4936 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 4937 for (qid = 0; qid < 7; qid++) { 4938 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 4, 5, 6 }; 4939 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 4940 IWN4965_TXQ_STATUS_ACTIVE | qid2fifo[qid] << 1); 4941 } 4942 iwn_nic_unlock(sc); 4943 return 0; 4944 } 4945 4946 /* 4947 * This function is called after the initialization or runtime firmware 4948 * notifies us of its readiness (called in a process context). 4949 */ 4950 static int 4951 iwn5000_post_alive(struct iwn_softc *sc) 4952 { 4953 int error, qid; 4954 4955 /* Switch to using ICT interrupt mode. */ 4956 iwn5000_ict_reset(sc); 4957 4958 if ((error = iwn_nic_lock(sc)) != 0) 4959 return error; 4960 4961 /* Clear TX scheduler state in SRAM. */ 4962 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 4963 iwn_mem_set_region_4(sc, sc->sched_base + IWN5000_SCHED_CTX_OFF, 0, 4964 IWN5000_SCHED_CTX_LEN / sizeof (uint32_t)); 4965 4966 /* Set physical address of TX scheduler rings (1KB aligned). */ 4967 iwn_prph_write(sc, IWN5000_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 4968 4969 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 4970 4971 /* Enable chain mode for all queues, except command queue. */ 4972 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffef); 4973 iwn_prph_write(sc, IWN5000_SCHED_AGGR_SEL, 0); 4974 4975 for (qid = 0; qid < IWN5000_NTXQUEUES; qid++) { 4976 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), 0); 4977 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 4978 4979 iwn_mem_write(sc, sc->sched_base + 4980 IWN5000_SCHED_QUEUE_OFFSET(qid), 0); 4981 /* Set scheduler window size and frame limit. */ 4982 iwn_mem_write(sc, sc->sched_base + 4983 IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 4984 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 4985 } 4986 4987 /* Enable interrupts for all our 20 queues. */ 4988 iwn_prph_write(sc, IWN5000_SCHED_INTR_MASK, 0xfffff); 4989 /* Identify TX FIFO rings (0-7). */ 4990 iwn_prph_write(sc, IWN5000_SCHED_TXFACT, 0xff); 4991 4992 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 4993 for (qid = 0; qid < 7; qid++) { 4994 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 7, 5, 6 }; 4995 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 4996 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 4997 } 4998 iwn_nic_unlock(sc); 4999 5000 /* Configure WiMAX coexistence for combo adapters. */ 5001 error = iwn5000_send_wimax_coex(sc); 5002 if (error != 0) { 5003 aprint_error_dev(sc->sc_dev, 5004 "could not configure WiMAX coexistence\n"); 5005 return error; 5006 } 5007 if (sc->hw_type != IWN_HW_REV_TYPE_5150) { 5008 struct iwn5000_phy_calib_crystal cmd; 5009 5010 /* Perform crystal calibration. */ 5011 memset(&cmd, 0, sizeof cmd); 5012 cmd.code = IWN5000_PHY_CALIB_CRYSTAL; 5013 cmd.ngroups = 1; 5014 cmd.isvalid = 1; 5015 cmd.cap_pin[0] = le32toh(sc->eeprom_crystal) & 0xff; 5016 cmd.cap_pin[1] = (le32toh(sc->eeprom_crystal) >> 16) & 0xff; 5017 DPRINTF(("sending crystal calibration %d, %d\n", 5018 cmd.cap_pin[0], cmd.cap_pin[1])); 5019 error = iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 5020 if (error != 0) { 5021 aprint_error_dev(sc->sc_dev, 5022 "crystal calibration failed\n"); 5023 return error; 5024 } 5025 } 5026 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) { 5027 /* Query calibration from the initialization firmware. */ 5028 if ((error = iwn5000_query_calibration(sc)) != 0) { 5029 aprint_error_dev(sc->sc_dev, 5030 "could not query calibration\n"); 5031 return error; 5032 } 5033 /* 5034 * We have the calibration results now, reboot with the 5035 * runtime firmware (call ourselves recursively!) 5036 */ 5037 iwn_hw_stop(sc); 5038 error = iwn_hw_init(sc); 5039 } else { 5040 /* Send calibration results to runtime firmware. */ 5041 error = iwn5000_send_calibration(sc); 5042 } 5043 return error; 5044 } 5045 5046 /* 5047 * The firmware boot code is small and is intended to be copied directly into 5048 * the NIC internal memory (no DMA transfer). 5049 */ 5050 static int 5051 iwn4965_load_bootcode(struct iwn_softc *sc, const uint8_t *ucode, int size) 5052 { 5053 int error, ntries; 5054 5055 size /= sizeof (uint32_t); 5056 5057 if ((error = iwn_nic_lock(sc)) != 0) 5058 return error; 5059 5060 /* Copy microcode image into NIC memory. */ 5061 iwn_prph_write_region_4(sc, IWN_BSM_SRAM_BASE, 5062 (const uint32_t *)ucode, size); 5063 5064 iwn_prph_write(sc, IWN_BSM_WR_MEM_SRC, 0); 5065 iwn_prph_write(sc, IWN_BSM_WR_MEM_DST, IWN_FW_TEXT_BASE); 5066 iwn_prph_write(sc, IWN_BSM_WR_DWCOUNT, size); 5067 5068 /* Start boot load now. */ 5069 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START); 5070 5071 /* Wait for transfer to complete. */ 5072 for (ntries = 0; ntries < 1000; ntries++) { 5073 if (!(iwn_prph_read(sc, IWN_BSM_WR_CTRL) & 5074 IWN_BSM_WR_CTRL_START)) 5075 break; 5076 DELAY(10); 5077 } 5078 if (ntries == 1000) { 5079 aprint_error_dev(sc->sc_dev, 5080 "could not load boot firmware\n"); 5081 iwn_nic_unlock(sc); 5082 return ETIMEDOUT; 5083 } 5084 5085 /* Enable boot after power up. */ 5086 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START_EN); 5087 5088 iwn_nic_unlock(sc); 5089 return 0; 5090 } 5091 5092 static int 5093 iwn4965_load_firmware(struct iwn_softc *sc) 5094 { 5095 struct iwn_fw_info *fw = &sc->fw; 5096 struct iwn_dma_info *dma = &sc->fw_dma; 5097 int error; 5098 5099 /* Copy initialization sections into pre-allocated DMA-safe memory. */ 5100 memcpy(dma->vaddr, fw->init.data, fw->init.datasz); 5101 bus_dmamap_sync(sc->sc_dmat, dma->map, 0, fw->init.datasz, 5102 BUS_DMASYNC_PREWRITE); 5103 memcpy((char *)dma->vaddr + IWN4965_FW_DATA_MAXSZ, 5104 fw->init.text, fw->init.textsz); 5105 bus_dmamap_sync(sc->sc_dmat, dma->map, IWN4965_FW_DATA_MAXSZ, 5106 fw->init.textsz, BUS_DMASYNC_PREWRITE); 5107 5108 /* Tell adapter where to find initialization sections. */ 5109 if ((error = iwn_nic_lock(sc)) != 0) 5110 return error; 5111 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 5112 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->init.datasz); 5113 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 5114 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 5115 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, fw->init.textsz); 5116 iwn_nic_unlock(sc); 5117 5118 /* Load firmware boot code. */ 5119 error = iwn4965_load_bootcode(sc, fw->boot.text, fw->boot.textsz); 5120 if (error != 0) { 5121 aprint_error_dev(sc->sc_dev, 5122 "could not load boot firmware\n"); 5123 return error; 5124 } 5125 /* Now press "execute". */ 5126 IWN_WRITE(sc, IWN_RESET, 0); 5127 5128 /* Wait at most one second for first alive notification. */ 5129 if ((error = tsleep(sc, PCATCH, "iwninit", hz)) != 0) { 5130 aprint_error_dev(sc->sc_dev, 5131 "timeout waiting for adapter to initialize\n"); 5132 return error; 5133 } 5134 5135 /* Retrieve current temperature for initial TX power calibration. */ 5136 sc->rawtemp = sc->ucode_info.temp[3].chan20MHz; 5137 sc->temp = iwn4965_get_temperature(sc); 5138 5139 /* Copy runtime sections into pre-allocated DMA-safe memory. */ 5140 memcpy(dma->vaddr, fw->main.data, fw->main.datasz); 5141 bus_dmamap_sync(sc->sc_dmat, dma->map, 0, fw->main.datasz, 5142 BUS_DMASYNC_PREWRITE); 5143 memcpy((char *)dma->vaddr + IWN4965_FW_DATA_MAXSZ, 5144 fw->main.text, fw->main.textsz); 5145 bus_dmamap_sync(sc->sc_dmat, dma->map, IWN4965_FW_DATA_MAXSZ, 5146 fw->main.textsz, BUS_DMASYNC_PREWRITE); 5147 5148 /* Tell adapter where to find runtime sections. */ 5149 if ((error = iwn_nic_lock(sc)) != 0) 5150 return error; 5151 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 5152 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->main.datasz); 5153 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 5154 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 5155 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, 5156 IWN_FW_UPDATED | fw->main.textsz); 5157 iwn_nic_unlock(sc); 5158 5159 return 0; 5160 } 5161 5162 static int 5163 iwn5000_load_firmware_section(struct iwn_softc *sc, uint32_t dst, 5164 const uint8_t *section, int size) 5165 { 5166 struct iwn_dma_info *dma = &sc->fw_dma; 5167 int error; 5168 5169 /* Copy firmware section into pre-allocated DMA-safe memory. */ 5170 memcpy(dma->vaddr, section, size); 5171 bus_dmamap_sync(sc->sc_dmat, dma->map, 0, size, BUS_DMASYNC_PREWRITE); 5172 5173 if ((error = iwn_nic_lock(sc)) != 0) 5174 return error; 5175 5176 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 5177 IWN_FH_TX_CONFIG_DMA_PAUSE); 5178 5179 IWN_WRITE(sc, IWN_FH_SRAM_ADDR(IWN_SRVC_DMACHNL), dst); 5180 IWN_WRITE(sc, IWN_FH_TFBD_CTRL0(IWN_SRVC_DMACHNL), 5181 IWN_LOADDR(dma->paddr)); 5182 IWN_WRITE(sc, IWN_FH_TFBD_CTRL1(IWN_SRVC_DMACHNL), 5183 IWN_HIADDR(dma->paddr) << 28 | size); 5184 IWN_WRITE(sc, IWN_FH_TXBUF_STATUS(IWN_SRVC_DMACHNL), 5185 IWN_FH_TXBUF_STATUS_TBNUM(1) | 5186 IWN_FH_TXBUF_STATUS_TBIDX(1) | 5187 IWN_FH_TXBUF_STATUS_TFBD_VALID); 5188 5189 /* Kick Flow Handler to start DMA transfer. */ 5190 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 5191 IWN_FH_TX_CONFIG_DMA_ENA | IWN_FH_TX_CONFIG_CIRQ_HOST_ENDTFD); 5192 5193 iwn_nic_unlock(sc); 5194 5195 /* Wait at most five seconds for FH DMA transfer to complete. */ 5196 return tsleep(sc, PCATCH, "iwninit", 5 * hz); 5197 } 5198 5199 static int 5200 iwn5000_load_firmware(struct iwn_softc *sc) 5201 { 5202 struct iwn_fw_part *fw; 5203 int error; 5204 5205 /* Load the initialization firmware on first boot only. */ 5206 fw = (sc->sc_flags & IWN_FLAG_CALIB_DONE) ? 5207 &sc->fw.main : &sc->fw.init; 5208 5209 error = iwn5000_load_firmware_section(sc, IWN_FW_TEXT_BASE, 5210 fw->text, fw->textsz); 5211 if (error != 0) { 5212 aprint_error_dev(sc->sc_dev, 5213 "could not load firmware %s section\n", ".text"); 5214 return error; 5215 } 5216 error = iwn5000_load_firmware_section(sc, IWN_FW_DATA_BASE, 5217 fw->data, fw->datasz); 5218 if (error != 0) { 5219 aprint_error_dev(sc->sc_dev, 5220 "could not load firmware %s section\n", ".data"); 5221 return error; 5222 } 5223 5224 /* Now press "execute". */ 5225 IWN_WRITE(sc, IWN_RESET, 0); 5226 return 0; 5227 } 5228 5229 /* 5230 * Extract text and data sections from a legacy firmware image. 5231 */ 5232 static int 5233 iwn_read_firmware_leg(struct iwn_softc *sc, struct iwn_fw_info *fw) 5234 { 5235 const uint32_t *ptr; 5236 size_t hdrlen = 24; 5237 uint32_t rev; 5238 5239 ptr = (const uint32_t *)fw->data; 5240 rev = le32toh(*ptr++); 5241 5242 /* Check firmware API version. */ 5243 if (IWN_FW_API(rev) <= 1) { 5244 aprint_error_dev(sc->sc_dev, 5245 "bad firmware, need API version >=2\n"); 5246 return EINVAL; 5247 } 5248 if (IWN_FW_API(rev) >= 3) { 5249 /* Skip build number (version 2 header). */ 5250 hdrlen += 4; 5251 ptr++; 5252 } 5253 if (fw->size < hdrlen) { 5254 aprint_error_dev(sc->sc_dev, 5255 "firmware too short: %zd bytes\n", fw->size); 5256 return EINVAL; 5257 } 5258 fw->main.textsz = le32toh(*ptr++); 5259 fw->main.datasz = le32toh(*ptr++); 5260 fw->init.textsz = le32toh(*ptr++); 5261 fw->init.datasz = le32toh(*ptr++); 5262 fw->boot.textsz = le32toh(*ptr++); 5263 5264 /* Check that all firmware sections fit. */ 5265 if (fw->size < hdrlen + fw->main.textsz + fw->main.datasz + 5266 fw->init.textsz + fw->init.datasz + fw->boot.textsz) { 5267 aprint_error_dev(sc->sc_dev, 5268 "firmware too short: %zd bytes\n", fw->size); 5269 return EINVAL; 5270 } 5271 5272 /* Get pointers to firmware sections. */ 5273 fw->main.text = (const uint8_t *)ptr; 5274 fw->main.data = fw->main.text + fw->main.textsz; 5275 fw->init.text = fw->main.data + fw->main.datasz; 5276 fw->init.data = fw->init.text + fw->init.textsz; 5277 fw->boot.text = fw->init.data + fw->init.datasz; 5278 return 0; 5279 } 5280 5281 /* 5282 * Extract text and data sections from a TLV firmware image. 5283 */ 5284 static int 5285 iwn_read_firmware_tlv(struct iwn_softc *sc, struct iwn_fw_info *fw, 5286 uint16_t alt) 5287 { 5288 const struct iwn_fw_tlv_hdr *hdr; 5289 const struct iwn_fw_tlv *tlv; 5290 const uint8_t *ptr, *end; 5291 uint64_t altmask; 5292 uint32_t len; 5293 5294 if (fw->size < sizeof (*hdr)) { 5295 aprint_error_dev(sc->sc_dev, 5296 "firmware too short: %zd bytes\n", fw->size); 5297 return EINVAL; 5298 } 5299 hdr = (const struct iwn_fw_tlv_hdr *)fw->data; 5300 if (hdr->signature != htole32(IWN_FW_SIGNATURE)) { 5301 aprint_error_dev(sc->sc_dev, 5302 "bad firmware signature 0x%08x\n", le32toh(hdr->signature)); 5303 return EINVAL; 5304 } 5305 DPRINTF(("FW: \"%.64s\", build 0x%x\n", hdr->descr, 5306 le32toh(hdr->build))); 5307 5308 /* 5309 * Select the closest supported alternative that is less than 5310 * or equal to the specified one. 5311 */ 5312 altmask = le64toh(hdr->altmask); 5313 while (alt > 0 && !(altmask & (1ULL << alt))) 5314 alt--; /* Downgrade. */ 5315 DPRINTF(("using alternative %d\n", alt)); 5316 5317 ptr = (const uint8_t *)(hdr + 1); 5318 end = (const uint8_t *)(fw->data + fw->size); 5319 5320 /* Parse type-length-value fields. */ 5321 while (ptr + sizeof (*tlv) <= end) { 5322 tlv = (const struct iwn_fw_tlv *)ptr; 5323 len = le32toh(tlv->len); 5324 5325 ptr += sizeof (*tlv); 5326 if (ptr + len > end) { 5327 aprint_error_dev(sc->sc_dev, 5328 "firmware too short: %zd bytes\n", fw->size); 5329 return EINVAL; 5330 } 5331 /* Skip other alternatives. */ 5332 if (tlv->alt != 0 && tlv->alt != htole16(alt)) 5333 goto next; 5334 5335 switch (le16toh(tlv->type)) { 5336 case IWN_FW_TLV_MAIN_TEXT: 5337 fw->main.text = ptr; 5338 fw->main.textsz = len; 5339 break; 5340 case IWN_FW_TLV_MAIN_DATA: 5341 fw->main.data = ptr; 5342 fw->main.datasz = len; 5343 break; 5344 case IWN_FW_TLV_INIT_TEXT: 5345 fw->init.text = ptr; 5346 fw->init.textsz = len; 5347 break; 5348 case IWN_FW_TLV_INIT_DATA: 5349 fw->init.data = ptr; 5350 fw->init.datasz = len; 5351 break; 5352 case IWN_FW_TLV_BOOT_TEXT: 5353 fw->boot.text = ptr; 5354 fw->boot.textsz = len; 5355 break; 5356 default: 5357 DPRINTF(("TLV type %d not handled\n", 5358 le16toh(tlv->type))); 5359 break; 5360 } 5361 next: /* TLV fields are 32-bit aligned. */ 5362 ptr += (len + 3) & ~3; 5363 } 5364 return 0; 5365 } 5366 5367 static int 5368 iwn_read_firmware(struct iwn_softc *sc) 5369 { 5370 struct iwn_fw_info *fw = &sc->fw; 5371 firmware_handle_t fwh; 5372 int error; 5373 5374 /* Initialize for error returns */ 5375 fw->data = NULL; 5376 fw->size = 0; 5377 5378 /* Open firmware image. */ 5379 if ((error = firmware_open("if_iwn", sc->fwname, &fwh)) != 0) { 5380 aprint_error_dev(sc->sc_dev, 5381 "could not get firmware handle %s\n", sc->fwname); 5382 return error; 5383 } 5384 fw->size = firmware_get_size(fwh); 5385 if (fw->size < sizeof (uint32_t)) { 5386 aprint_error_dev(sc->sc_dev, 5387 "firmware too short: %zd bytes\n", fw->size); 5388 firmware_close(fwh); 5389 return EINVAL; 5390 } 5391 5392 /* Read the firmware. */ 5393 fw->data = firmware_malloc(fw->size); 5394 if (fw->data == NULL) { 5395 aprint_error_dev(sc->sc_dev, 5396 "not enough memory to stock firmware %s\n", sc->fwname); 5397 firmware_close(fwh); 5398 return ENOMEM; 5399 } 5400 error = firmware_read(fwh, 0, fw->data, fw->size); 5401 firmware_close(fwh); 5402 if (error != 0) { 5403 aprint_error_dev(sc->sc_dev, 5404 "could not read firmware %s\n", sc->fwname); 5405 goto out; 5406 } 5407 5408 /* Retrieve text and data sections. */ 5409 if (*(const uint32_t *)fw->data != 0) /* Legacy image. */ 5410 error = iwn_read_firmware_leg(sc, fw); 5411 else 5412 error = iwn_read_firmware_tlv(sc, fw, 1); 5413 if (error != 0) { 5414 aprint_error_dev(sc->sc_dev, 5415 "could not read firmware sections\n"); 5416 goto out; 5417 } 5418 5419 /* Make sure text and data sections fit in hardware memory. */ 5420 if (fw->main.textsz > sc->fw_text_maxsz || 5421 fw->main.datasz > sc->fw_data_maxsz || 5422 fw->init.textsz > sc->fw_text_maxsz || 5423 fw->init.datasz > sc->fw_data_maxsz || 5424 fw->boot.textsz > IWN_FW_BOOT_TEXT_MAXSZ || 5425 (fw->boot.textsz & 3) != 0) { 5426 aprint_error_dev(sc->sc_dev, 5427 "firmware sections too large\n"); 5428 goto out; 5429 } 5430 5431 /* We can proceed with loading the firmware. */ 5432 return 0; 5433 out: 5434 firmware_free(fw->data, fw->size); 5435 fw->data = NULL; 5436 fw->size = 0; 5437 return error ? error : EINVAL; 5438 } 5439 5440 static int 5441 iwn_clock_wait(struct iwn_softc *sc) 5442 { 5443 int ntries; 5444 5445 /* Set "initialization complete" bit. */ 5446 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 5447 5448 /* Wait for clock stabilization. */ 5449 for (ntries = 0; ntries < 2500; ntries++) { 5450 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_MAC_CLOCK_READY) 5451 return 0; 5452 DELAY(10); 5453 } 5454 aprint_error_dev(sc->sc_dev, 5455 "timeout waiting for clock stabilization\n"); 5456 return ETIMEDOUT; 5457 } 5458 5459 static int 5460 iwn_apm_init(struct iwn_softc *sc) 5461 { 5462 pcireg_t reg; 5463 int error; 5464 5465 /* Disable L0s exit timer (NMI bug workaround). */ 5466 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_DIS_L0S_TIMER); 5467 /* Don't wait for ICH L0s (ICH bug workaround). */ 5468 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_L1A_NO_L0S_RX); 5469 5470 /* Set FH wait threshold to max (HW bug under stress workaround). */ 5471 IWN_SETBITS(sc, IWN_DBG_HPET_MEM, 0xffff0000); 5472 5473 /* Enable HAP INTA to move adapter from L1a to L0s. */ 5474 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_HAP_WAKE_L1A); 5475 5476 /* Retrieve PCIe Active State Power Management (ASPM). */ 5477 reg = pci_conf_read(sc->sc_pct, sc->sc_pcitag, 5478 sc->sc_cap_off + PCI_PCIE_LCSR); 5479 /* Workaround for HW instability in PCIe L0->L0s->L1 transition. */ 5480 if (reg & PCI_PCIE_LCSR_ASPM_L1) /* L1 Entry enabled. */ 5481 IWN_SETBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 5482 else 5483 IWN_CLRBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 5484 5485 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 5486 sc->hw_type <= IWN_HW_REV_TYPE_1000) 5487 IWN_SETBITS(sc, IWN_ANA_PLL, IWN_ANA_PLL_INIT); 5488 5489 /* Wait for clock stabilization before accessing prph. */ 5490 if ((error = iwn_clock_wait(sc)) != 0) 5491 return error; 5492 5493 if ((error = iwn_nic_lock(sc)) != 0) 5494 return error; 5495 if (sc->hw_type == IWN_HW_REV_TYPE_4965) { 5496 /* Enable DMA and BSM (Bootstrap State Machine). */ 5497 iwn_prph_write(sc, IWN_APMG_CLK_EN, 5498 IWN_APMG_CLK_CTRL_DMA_CLK_RQT | 5499 IWN_APMG_CLK_CTRL_BSM_CLK_RQT); 5500 } else { 5501 /* Enable DMA. */ 5502 iwn_prph_write(sc, IWN_APMG_CLK_EN, 5503 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 5504 } 5505 DELAY(20); 5506 /* Disable L1-Active. */ 5507 iwn_prph_setbits(sc, IWN_APMG_PCI_STT, IWN_APMG_PCI_STT_L1A_DIS); 5508 iwn_nic_unlock(sc); 5509 5510 return 0; 5511 } 5512 5513 static void 5514 iwn_apm_stop_master(struct iwn_softc *sc) 5515 { 5516 int ntries; 5517 5518 /* Stop busmaster DMA activity. */ 5519 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_STOP_MASTER); 5520 for (ntries = 0; ntries < 100; ntries++) { 5521 if (IWN_READ(sc, IWN_RESET) & IWN_RESET_MASTER_DISABLED) 5522 return; 5523 DELAY(10); 5524 } 5525 aprint_error_dev(sc->sc_dev, 5526 "timeout waiting for master\n"); 5527 } 5528 5529 static void 5530 iwn_apm_stop(struct iwn_softc *sc) 5531 { 5532 iwn_apm_stop_master(sc); 5533 5534 /* Reset the entire device. */ 5535 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_SW); 5536 DELAY(10); 5537 /* Clear "initialization complete" bit. */ 5538 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 5539 } 5540 5541 static int 5542 iwn4965_nic_config(struct iwn_softc *sc) 5543 { 5544 if (IWN_RFCFG_TYPE(sc->rfcfg) == 1) { 5545 /* 5546 * I don't believe this to be correct but this is what the 5547 * vendor driver is doing. Probably the bits should not be 5548 * shifted in IWN_RFCFG_*. 5549 */ 5550 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 5551 IWN_RFCFG_TYPE(sc->rfcfg) | 5552 IWN_RFCFG_STEP(sc->rfcfg) | 5553 IWN_RFCFG_DASH(sc->rfcfg)); 5554 } 5555 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 5556 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 5557 return 0; 5558 } 5559 5560 static int 5561 iwn5000_nic_config(struct iwn_softc *sc) 5562 { 5563 uint32_t tmp; 5564 int error; 5565 5566 if (IWN_RFCFG_TYPE(sc->rfcfg) < 3) { 5567 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 5568 IWN_RFCFG_TYPE(sc->rfcfg) | 5569 IWN_RFCFG_STEP(sc->rfcfg) | 5570 IWN_RFCFG_DASH(sc->rfcfg)); 5571 } 5572 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 5573 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 5574 5575 if ((error = iwn_nic_lock(sc)) != 0) 5576 return error; 5577 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_EARLY_PWROFF_DIS); 5578 5579 if (sc->hw_type == IWN_HW_REV_TYPE_1000) { 5580 /* 5581 * Select first Switching Voltage Regulator (1.32V) to 5582 * solve a stability issue related to noisy DC2DC line 5583 * in the silicon of 1000 Series. 5584 */ 5585 tmp = iwn_prph_read(sc, IWN_APMG_DIGITAL_SVR); 5586 tmp &= ~IWN_APMG_DIGITAL_SVR_VOLTAGE_MASK; 5587 tmp |= IWN_APMG_DIGITAL_SVR_VOLTAGE_1_32; 5588 iwn_prph_write(sc, IWN_APMG_DIGITAL_SVR, tmp); 5589 } 5590 iwn_nic_unlock(sc); 5591 5592 if (sc->sc_flags & IWN_FLAG_INTERNAL_PA) { 5593 /* Use internal power amplifier only. */ 5594 IWN_WRITE(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_RADIO_2X2_IPA); 5595 } 5596 if ((sc->hw_type == IWN_HW_REV_TYPE_6050 || 5597 sc->hw_type == IWN_HW_REV_TYPE_6005) && sc->calib_ver >= 6) { 5598 /* Indicate that ROM calibration version is >=6. */ 5599 IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_CALIB_VER6); 5600 } 5601 if (sc->hw_type == IWN_HW_REV_TYPE_6005) 5602 IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_6050_1X2); 5603 return 0; 5604 } 5605 5606 /* 5607 * Take NIC ownership over Intel Active Management Technology (AMT). 5608 */ 5609 static int 5610 iwn_hw_prepare(struct iwn_softc *sc) 5611 { 5612 int ntries; 5613 5614 /* Check if hardware is ready. */ 5615 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 5616 for (ntries = 0; ntries < 5; ntries++) { 5617 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 5618 IWN_HW_IF_CONFIG_NIC_READY) 5619 return 0; 5620 DELAY(10); 5621 } 5622 5623 /* Hardware not ready, force into ready state. */ 5624 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_PREPARE); 5625 for (ntries = 0; ntries < 15000; ntries++) { 5626 if (!(IWN_READ(sc, IWN_HW_IF_CONFIG) & 5627 IWN_HW_IF_CONFIG_PREPARE_DONE)) 5628 break; 5629 DELAY(10); 5630 } 5631 if (ntries == 15000) 5632 return ETIMEDOUT; 5633 5634 /* Hardware should be ready now. */ 5635 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 5636 for (ntries = 0; ntries < 5; ntries++) { 5637 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 5638 IWN_HW_IF_CONFIG_NIC_READY) 5639 return 0; 5640 DELAY(10); 5641 } 5642 return ETIMEDOUT; 5643 } 5644 5645 static int 5646 iwn_hw_init(struct iwn_softc *sc) 5647 { 5648 struct iwn_ops *ops = &sc->ops; 5649 int error, chnl, qid; 5650 5651 /* Clear pending interrupts. */ 5652 IWN_WRITE(sc, IWN_INT, 0xffffffff); 5653 5654 if ((error = iwn_apm_init(sc)) != 0) { 5655 aprint_error_dev(sc->sc_dev, 5656 "could not power ON adapter\n"); 5657 return error; 5658 } 5659 5660 /* Select VMAIN power source. */ 5661 if ((error = iwn_nic_lock(sc)) != 0) 5662 return error; 5663 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_PWR_SRC_MASK); 5664 iwn_nic_unlock(sc); 5665 5666 /* Perform adapter-specific initialization. */ 5667 if ((error = ops->nic_config(sc)) != 0) 5668 return error; 5669 5670 /* Initialize RX ring. */ 5671 if ((error = iwn_nic_lock(sc)) != 0) 5672 return error; 5673 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 5674 IWN_WRITE(sc, IWN_FH_RX_WPTR, 0); 5675 /* Set physical address of RX ring (256-byte aligned). */ 5676 IWN_WRITE(sc, IWN_FH_RX_BASE, sc->rxq.desc_dma.paddr >> 8); 5677 /* Set physical address of RX status (16-byte aligned). */ 5678 IWN_WRITE(sc, IWN_FH_STATUS_WPTR, sc->rxq.stat_dma.paddr >> 4); 5679 /* Enable RX. */ 5680 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 5681 IWN_FH_RX_CONFIG_ENA | 5682 IWN_FH_RX_CONFIG_IGN_RXF_EMPTY | /* HW bug workaround */ 5683 IWN_FH_RX_CONFIG_IRQ_DST_HOST | 5684 IWN_FH_RX_CONFIG_SINGLE_FRAME | 5685 IWN_FH_RX_CONFIG_RB_TIMEOUT(0) | 5686 IWN_FH_RX_CONFIG_NRBD(IWN_RX_RING_COUNT_LOG)); 5687 iwn_nic_unlock(sc); 5688 IWN_WRITE(sc, IWN_FH_RX_WPTR, (IWN_RX_RING_COUNT - 1) & ~7); 5689 5690 if ((error = iwn_nic_lock(sc)) != 0) 5691 return error; 5692 5693 /* Initialize TX scheduler. */ 5694 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 5695 5696 /* Set physical address of "keep warm" page (16-byte aligned). */ 5697 IWN_WRITE(sc, IWN_FH_KW_ADDR, sc->kw_dma.paddr >> 4); 5698 5699 /* Initialize TX rings. */ 5700 for (qid = 0; qid < sc->ntxqs; qid++) { 5701 struct iwn_tx_ring *txq = &sc->txq[qid]; 5702 5703 /* Set physical address of TX ring (256-byte aligned). */ 5704 IWN_WRITE(sc, IWN_FH_CBBC_QUEUE(qid), 5705 txq->desc_dma.paddr >> 8); 5706 } 5707 iwn_nic_unlock(sc); 5708 5709 /* Enable DMA channels. */ 5710 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 5711 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 5712 IWN_FH_TX_CONFIG_DMA_ENA | 5713 IWN_FH_TX_CONFIG_DMA_CREDIT_ENA); 5714 } 5715 5716 /* Clear "radio off" and "commands blocked" bits. */ 5717 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 5718 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CMD_BLOCKED); 5719 5720 /* Clear pending interrupts. */ 5721 IWN_WRITE(sc, IWN_INT, 0xffffffff); 5722 /* Enable interrupt coalescing. */ 5723 IWN_WRITE(sc, IWN_INT_COALESCING, 512 / 8); 5724 /* Enable interrupts. */ 5725 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 5726 5727 /* _Really_ make sure "radio off" bit is cleared! */ 5728 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 5729 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 5730 5731 /* Enable shadow registers. */ 5732 if (sc->hw_type >= IWN_HW_REV_TYPE_6000) 5733 IWN_SETBITS(sc, IWN_SHADOW_REG_CTRL, 0x800fffff); 5734 5735 if ((error = ops->load_firmware(sc)) != 0) { 5736 aprint_error_dev(sc->sc_dev, 5737 "could not load firmware\n"); 5738 return error; 5739 } 5740 /* Wait at most one second for firmware alive notification. */ 5741 if ((error = tsleep(sc, PCATCH, "iwninit", hz)) != 0) { 5742 aprint_error_dev(sc->sc_dev, 5743 "timeout waiting for adapter to initialize\n"); 5744 return error; 5745 } 5746 /* Do post-firmware initialization. */ 5747 return ops->post_alive(sc); 5748 } 5749 5750 static void 5751 iwn_hw_stop(struct iwn_softc *sc) 5752 { 5753 int chnl, qid, ntries; 5754 5755 IWN_WRITE(sc, IWN_RESET, IWN_RESET_NEVO); 5756 5757 /* Disable interrupts. */ 5758 IWN_WRITE(sc, IWN_INT_MASK, 0); 5759 IWN_WRITE(sc, IWN_INT, 0xffffffff); 5760 IWN_WRITE(sc, IWN_FH_INT, 0xffffffff); 5761 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 5762 5763 /* Make sure we no longer hold the NIC lock. */ 5764 iwn_nic_unlock(sc); 5765 5766 /* Stop TX scheduler. */ 5767 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 5768 5769 /* Stop all DMA channels. */ 5770 if (iwn_nic_lock(sc) == 0) { 5771 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 5772 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 0); 5773 for (ntries = 0; ntries < 200; ntries++) { 5774 if (IWN_READ(sc, IWN_FH_TX_STATUS) & 5775 IWN_FH_TX_STATUS_IDLE(chnl)) 5776 break; 5777 DELAY(10); 5778 } 5779 } 5780 iwn_nic_unlock(sc); 5781 } 5782 5783 /* Stop RX ring. */ 5784 iwn_reset_rx_ring(sc, &sc->rxq); 5785 5786 /* Reset all TX rings. */ 5787 for (qid = 0; qid < sc->ntxqs; qid++) 5788 iwn_reset_tx_ring(sc, &sc->txq[qid]); 5789 5790 if (iwn_nic_lock(sc) == 0) { 5791 iwn_prph_write(sc, IWN_APMG_CLK_DIS, 5792 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 5793 iwn_nic_unlock(sc); 5794 } 5795 DELAY(5); 5796 /* Power OFF adapter. */ 5797 iwn_apm_stop(sc); 5798 } 5799 5800 static int 5801 iwn_init(struct ifnet *ifp) 5802 { 5803 struct iwn_softc *sc = ifp->if_softc; 5804 struct ieee80211com *ic = &sc->sc_ic; 5805 int error; 5806 5807 mutex_enter(&sc->sc_mtx); 5808 if (sc->sc_flags & IWN_FLAG_HW_INITED) 5809 goto out; 5810 if ((error = iwn_hw_prepare(sc)) != 0) { 5811 aprint_error_dev(sc->sc_dev, 5812 "hardware not ready\n"); 5813 goto fail; 5814 } 5815 5816 /* Check that the radio is not disabled by hardware switch. */ 5817 if (!(IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL)) { 5818 aprint_error_dev(sc->sc_dev, 5819 "radio is disabled by hardware switch\n"); 5820 error = EPERM; /* :-) */ 5821 goto fail; 5822 } 5823 5824 /* Read firmware images from the filesystem. */ 5825 if ((error = iwn_read_firmware(sc)) != 0) { 5826 aprint_error_dev(sc->sc_dev, 5827 "could not read firmware\n"); 5828 goto fail; 5829 } 5830 5831 /* Initialize interrupt mask to default value. */ 5832 sc->int_mask = IWN_INT_MASK_DEF; 5833 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 5834 5835 /* Initialize hardware and upload firmware. */ 5836 KASSERT(sc->fw.data != NULL && sc->fw.size > 0); 5837 error = iwn_hw_init(sc); 5838 firmware_free(sc->fw.data, sc->fw.size); 5839 sc->fw.data = NULL; 5840 sc->fw.size = 0; 5841 if (error != 0) { 5842 aprint_error_dev(sc->sc_dev, 5843 "could not initialize hardware\n"); 5844 goto fail; 5845 } 5846 5847 /* Configure adapter now that it is ready. */ 5848 if ((error = iwn_config(sc)) != 0) { 5849 aprint_error_dev(sc->sc_dev, 5850 "could not configure device\n"); 5851 goto fail; 5852 } 5853 5854 ifp->if_flags &= ~IFF_OACTIVE; 5855 ifp->if_flags |= IFF_RUNNING; 5856 5857 if (ic->ic_opmode != IEEE80211_M_MONITOR) 5858 ieee80211_begin_scan(ic, 0); 5859 else 5860 ieee80211_new_state(ic, IEEE80211_S_RUN, -1); 5861 5862 sc->sc_flags |= IWN_FLAG_HW_INITED; 5863 out: 5864 mutex_exit(&sc->sc_mtx); 5865 return 0; 5866 5867 fail: mutex_exit(&sc->sc_mtx); 5868 iwn_stop(ifp, 1); 5869 return error; 5870 } 5871 5872 static void 5873 iwn_stop(struct ifnet *ifp, int disable) 5874 { 5875 struct iwn_softc *sc = ifp->if_softc; 5876 struct ieee80211com *ic = &sc->sc_ic; 5877 5878 if (!disable) 5879 mutex_enter(&sc->sc_mtx); 5880 sc->sc_flags &= ~IWN_FLAG_HW_INITED; 5881 ifp->if_timer = sc->sc_tx_timer = 0; 5882 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 5883 5884 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); 5885 5886 /* Power OFF hardware. */ 5887 iwn_hw_stop(sc); 5888 5889 if (!disable) 5890 mutex_exit(&sc->sc_mtx); 5891 } 5892 5893 /* 5894 * XXX MCLGETI alternative 5895 * 5896 * With IWN_USE_RBUF defined it uses the rbuf cache for receive buffers 5897 * as long as there are available free buffers then it uses MEXTMALLOC., 5898 * Without IWN_USE_RBUF defined it uses MEXTMALLOC exclusively. 5899 * The MCLGET4K code is used for testing an alternative mbuf cache. 5900 */ 5901 5902 static struct mbuf * 5903 MCLGETIalt(struct iwn_softc *sc, int how, 5904 struct ifnet *ifp __unused, u_int size) 5905 { 5906 struct mbuf *m; 5907 #ifdef IWN_USE_RBUF 5908 struct iwn_rbuf *rbuf; 5909 #endif 5910 5911 MGETHDR(m, how, MT_DATA); 5912 if (m == NULL) 5913 return NULL; 5914 5915 #ifdef IWN_USE_RBUF 5916 if (sc->rxq.nb_free_entries > 0 && 5917 (rbuf = iwn_alloc_rbuf(sc)) != NULL) { 5918 /* Attach buffer to mbuf header. */ 5919 MEXTADD(m, rbuf->vaddr, size, 0, iwn_free_rbuf, rbuf); 5920 m->m_flags |= M_EXT_RW; 5921 } 5922 else { 5923 MEXTMALLOC(m, size, how); 5924 if ((m->m_flags & M_EXT) == 0) { 5925 m_freem(m); 5926 return NULL; 5927 } 5928 } 5929 5930 #else 5931 #ifdef MCLGET4K 5932 if (size == 4096) 5933 MCLGET4K(m, how); 5934 else 5935 panic("size must be 4k"); 5936 #else 5937 MEXTMALLOC(m, size, how); 5938 #endif 5939 if ((m->m_flags & M_EXT) == 0) { 5940 m_freem(m); 5941 return NULL; 5942 } 5943 #endif 5944 5945 return m; 5946 } 5947 5948 #ifdef IWN_USE_RBUF 5949 static struct iwn_rbuf * 5950 iwn_alloc_rbuf(struct iwn_softc *sc) 5951 { 5952 struct iwn_rbuf *rbuf; 5953 mutex_enter(&sc->rxq.freelist_mtx); 5954 5955 rbuf = SLIST_FIRST(&sc->rxq.freelist); 5956 if (rbuf != NULL) { 5957 SLIST_REMOVE_HEAD(&sc->rxq.freelist, next); 5958 sc->rxq.nb_free_entries --; 5959 } 5960 mutex_exit(&sc->rxq.freelist_mtx); 5961 return rbuf; 5962 } 5963 5964 /* 5965 * This is called automatically by the network stack when the mbuf to which 5966 * our RX buffer is attached is freed. 5967 */ 5968 static void 5969 iwn_free_rbuf(struct mbuf* m, void *buf, size_t size, void *arg) 5970 { 5971 struct iwn_rbuf *rbuf = arg; 5972 struct iwn_softc *sc = rbuf->sc; 5973 5974 /* Put the RX buffer back in the free list. */ 5975 mutex_enter(&sc->rxq.freelist_mtx); 5976 SLIST_INSERT_HEAD(&sc->rxq.freelist, rbuf, next); 5977 mutex_exit(&sc->rxq.freelist_mtx); 5978 5979 sc->rxq.nb_free_entries ++; 5980 if (__predict_true(m != NULL)) 5981 pool_cache_put(mb_cache, m); 5982 } 5983 5984 static int 5985 iwn_alloc_rpool(struct iwn_softc *sc) 5986 { 5987 struct iwn_rx_ring *ring = &sc->rxq; 5988 struct iwn_rbuf *rbuf; 5989 int i, error; 5990 5991 mutex_init(&ring->freelist_mtx, MUTEX_DEFAULT, IPL_NET); 5992 5993 /* Allocate a big chunk of DMA'able memory... */ 5994 error = iwn_dma_contig_alloc(sc->sc_dmat, &ring->buf_dma, NULL, 5995 IWN_RBUF_COUNT * IWN_RBUF_SIZE, PAGE_SIZE); 5996 if (error != 0) { 5997 aprint_error_dev(sc->sc_dev, 5998 "could not allocate RX buffers DMA memory\n"); 5999 return error; 6000 } 6001 /* ...and split it into chunks of IWN_RBUF_SIZE bytes. */ 6002 SLIST_INIT(&ring->freelist); 6003 for (i = 0; i < IWN_RBUF_COUNT; i++) { 6004 rbuf = &ring->rbuf[i]; 6005 6006 rbuf->sc = sc; /* Backpointer for callbacks. */ 6007 rbuf->vaddr = (void *)((vaddr_t)ring->buf_dma.vaddr + i * IWN_RBUF_SIZE); 6008 rbuf->paddr = ring->buf_dma.paddr + i * IWN_RBUF_SIZE; 6009 6010 SLIST_INSERT_HEAD(&ring->freelist, rbuf, next); 6011 } 6012 ring->nb_free_entries = IWN_RBUF_COUNT; 6013 return 0; 6014 } 6015 6016 static void 6017 iwn_free_rpool(struct iwn_softc *sc) 6018 { 6019 iwn_dma_contig_free(&sc->rxq.buf_dma); 6020 } 6021 #endif 6022 6023 /* 6024 * XXX code from OpenBSD src/sys/net80211/ieee80211_output.c 6025 * Copyright (c) 2001 Atsushi Onoe 6026 * Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting 6027 * Copyright (c) 2007-2009 Damien Bergamini 6028 * All rights reserved. 6029 */ 6030 6031 /* 6032 * Add an SSID element to a frame (see 7.3.2.1). 6033 */ 6034 static u_int8_t * 6035 ieee80211_add_ssid(u_int8_t *frm, const u_int8_t *ssid, u_int len) 6036 { 6037 *frm++ = IEEE80211_ELEMID_SSID; 6038 *frm++ = len; 6039 memcpy(frm, ssid, len); 6040 return frm + len; 6041 } 6042 6043 /* 6044 * Add a supported rates element to a frame (see 7.3.2.2). 6045 */ 6046 static u_int8_t * 6047 ieee80211_add_rates(u_int8_t *frm, const struct ieee80211_rateset *rs) 6048 { 6049 int nrates; 6050 6051 *frm++ = IEEE80211_ELEMID_RATES; 6052 nrates = min(rs->rs_nrates, IEEE80211_RATE_SIZE); 6053 *frm++ = nrates; 6054 memcpy(frm, rs->rs_rates, nrates); 6055 return frm + nrates; 6056 } 6057 6058 /* 6059 * Add an extended supported rates element to a frame (see 7.3.2.14). 6060 */ 6061 static u_int8_t * 6062 ieee80211_add_xrates(u_int8_t *frm, const struct ieee80211_rateset *rs) 6063 { 6064 int nrates; 6065 6066 KASSERT(rs->rs_nrates > IEEE80211_RATE_SIZE); 6067 6068 *frm++ = IEEE80211_ELEMID_XRATES; 6069 nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; 6070 *frm++ = nrates; 6071 memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); 6072 return frm + nrates; 6073 } 6074 6075 /* 6076 * XXX: Hack to set the current channel to the value advertised in beacons or 6077 * probe responses. Only used during AP detection. 6078 * XXX: Duplicated from if_iwi.c 6079 */ 6080 static void 6081 iwn_fix_channel(struct ieee80211com *ic, struct mbuf *m) 6082 { 6083 struct ieee80211_frame *wh; 6084 uint8_t subtype; 6085 uint8_t *frm, *efrm; 6086 6087 wh = mtod(m, struct ieee80211_frame *); 6088 6089 if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_MGT) 6090 return; 6091 6092 subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 6093 6094 if (subtype != IEEE80211_FC0_SUBTYPE_BEACON && 6095 subtype != IEEE80211_FC0_SUBTYPE_PROBE_RESP) 6096 return; 6097 6098 frm = (uint8_t *)(wh + 1); 6099 efrm = mtod(m, uint8_t *) + m->m_len; 6100 6101 frm += 12; /* skip tstamp, bintval and capinfo fields */ 6102 while (frm < efrm) { 6103 if (*frm == IEEE80211_ELEMID_DSPARMS) 6104 #if IEEE80211_CHAN_MAX < 255 6105 if (frm[2] <= IEEE80211_CHAN_MAX) 6106 #endif 6107 ic->ic_curchan = &ic->ic_channels[frm[2]]; 6108 6109 frm += frm[1] + 2; 6110 } 6111 } 6112 6113
Indexes created Sun Sep 28 07:09:56 GMT 2025