if_wm.c revision 1.181
1 /* $NetBSD: if_wm.c,v 1.181 2009/11/26 15:17:10 njoly Exp $ */ 2 3 /* 4 * Copyright (c) 2001, 2002, 2003, 2004 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Jason R. Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /******************************************************************************* 39 40 Copyright (c) 2001-2005, Intel Corporation 41 All rights reserved. 42 43 Redistribution and use in source and binary forms, with or without 44 modification, are permitted provided that the following conditions are met: 45 46 1. Redistributions of source code must retain the above copyright notice, 47 this list of conditions and the following disclaimer. 48 49 2. Redistributions in binary form must reproduce the above copyright 50 notice, this list of conditions and the following disclaimer in the 51 documentation and/or other materials provided with the distribution. 52 53 3. Neither the name of the Intel Corporation nor the names of its 54 contributors may be used to endorse or promote products derived from 55 this software without specific prior written permission. 56 57 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 58 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 59 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 60 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 61 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 62 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 63 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 64 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 65 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 66 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 67 POSSIBILITY OF SUCH DAMAGE. 68 69 *******************************************************************************/ 70 /* 71 * Device driver for the Intel i8254x family of Gigabit Ethernet chips. 72 * 73 * TODO (in order of importance): 74 * 75 * - Rework how parameters are loaded from the EEPROM. 76 */ 77 78 #include <sys/cdefs.h> 79 __KERNEL_RCSID(0, "$NetBSD: if_wm.c,v 1.181 2009/11/26 15:17:10 njoly Exp $"); 80 81 #include "bpfilter.h" 82 #include "rnd.h" 83 84 #include <sys/param.h> 85 #include <sys/systm.h> 86 #include <sys/callout.h> 87 #include <sys/mbuf.h> 88 #include <sys/malloc.h> 89 #include <sys/kernel.h> 90 #include <sys/socket.h> 91 #include <sys/ioctl.h> 92 #include <sys/errno.h> 93 #include <sys/device.h> 94 #include <sys/queue.h> 95 #include <sys/syslog.h> 96 97 #include <uvm/uvm_extern.h> /* for PAGE_SIZE */ 98 99 #if NRND > 0 100 #include <sys/rnd.h> 101 #endif 102 103 #include <net/if.h> 104 #include <net/if_dl.h> 105 #include <net/if_media.h> 106 #include <net/if_ether.h> 107 108 #if NBPFILTER > 0 109 #include <net/bpf.h> 110 #endif 111 112 #include <netinet/in.h> /* XXX for struct ip */ 113 #include <netinet/in_systm.h> /* XXX for struct ip */ 114 #include <netinet/ip.h> /* XXX for struct ip */ 115 #include <netinet/ip6.h> /* XXX for struct ip6_hdr */ 116 #include <netinet/tcp.h> /* XXX for struct tcphdr */ 117 118 #include <sys/bus.h> 119 #include <sys/intr.h> 120 #include <machine/endian.h> 121 122 #include <dev/mii/mii.h> 123 #include <dev/mii/miivar.h> 124 #include <dev/mii/mii_bitbang.h> 125 #include <dev/mii/ikphyreg.h> 126 127 #include <dev/pci/pcireg.h> 128 #include <dev/pci/pcivar.h> 129 #include <dev/pci/pcidevs.h> 130 131 #include <dev/pci/if_wmreg.h> 132 133 #ifdef WM_DEBUG 134 #define WM_DEBUG_LINK 0x01 135 #define WM_DEBUG_TX 0x02 136 #define WM_DEBUG_RX 0x04 137 #define WM_DEBUG_GMII 0x08 138 int wm_debug = WM_DEBUG_TX|WM_DEBUG_RX|WM_DEBUG_LINK|WM_DEBUG_GMII; 139 140 #define DPRINTF(x, y) if (wm_debug & (x)) printf y 141 #else 142 #define DPRINTF(x, y) /* nothing */ 143 #endif /* WM_DEBUG */ 144 145 /* 146 * Transmit descriptor list size. Due to errata, we can only have 147 * 256 hardware descriptors in the ring on < 82544, but we use 4096 148 * on >= 82544. We tell the upper layers that they can queue a lot 149 * of packets, and we go ahead and manage up to 64 (16 for the i82547) 150 * of them at a time. 151 * 152 * We allow up to 256 (!) DMA segments per packet. Pathological packet 153 * chains containing many small mbufs have been observed in zero-copy 154 * situations with jumbo frames. 155 */ 156 #define WM_NTXSEGS 256 157 #define WM_IFQUEUELEN 256 158 #define WM_TXQUEUELEN_MAX 64 159 #define WM_TXQUEUELEN_MAX_82547 16 160 #define WM_TXQUEUELEN(sc) ((sc)->sc_txnum) 161 #define WM_TXQUEUELEN_MASK(sc) (WM_TXQUEUELEN(sc) - 1) 162 #define WM_TXQUEUE_GC(sc) (WM_TXQUEUELEN(sc) / 8) 163 #define WM_NTXDESC_82542 256 164 #define WM_NTXDESC_82544 4096 165 #define WM_NTXDESC(sc) ((sc)->sc_ntxdesc) 166 #define WM_NTXDESC_MASK(sc) (WM_NTXDESC(sc) - 1) 167 #define WM_TXDESCSIZE(sc) (WM_NTXDESC(sc) * sizeof(wiseman_txdesc_t)) 168 #define WM_NEXTTX(sc, x) (((x) + 1) & WM_NTXDESC_MASK(sc)) 169 #define WM_NEXTTXS(sc, x) (((x) + 1) & WM_TXQUEUELEN_MASK(sc)) 170 171 #define WM_MAXTXDMA round_page(IP_MAXPACKET) /* for TSO */ 172 173 /* 174 * Receive descriptor list size. We have one Rx buffer for normal 175 * sized packets. Jumbo packets consume 5 Rx buffers for a full-sized 176 * packet. We allocate 256 receive descriptors, each with a 2k 177 * buffer (MCLBYTES), which gives us room for 50 jumbo packets. 178 */ 179 #define WM_NRXDESC 256 180 #define WM_NRXDESC_MASK (WM_NRXDESC - 1) 181 #define WM_NEXTRX(x) (((x) + 1) & WM_NRXDESC_MASK) 182 #define WM_PREVRX(x) (((x) - 1) & WM_NRXDESC_MASK) 183 184 /* 185 * Control structures are DMA'd to the i82542 chip. We allocate them in 186 * a single clump that maps to a single DMA segment to make several things 187 * easier. 188 */ 189 struct wm_control_data_82544 { 190 /* 191 * The receive descriptors. 192 */ 193 wiseman_rxdesc_t wcd_rxdescs[WM_NRXDESC]; 194 195 /* 196 * The transmit descriptors. Put these at the end, because 197 * we might use a smaller number of them. 198 */ 199 wiseman_txdesc_t wcd_txdescs[WM_NTXDESC_82544]; 200 }; 201 202 struct wm_control_data_82542 { 203 wiseman_rxdesc_t wcd_rxdescs[WM_NRXDESC]; 204 wiseman_txdesc_t wcd_txdescs[WM_NTXDESC_82542]; 205 }; 206 207 #define WM_CDOFF(x) offsetof(struct wm_control_data_82544, x) 208 #define WM_CDTXOFF(x) WM_CDOFF(wcd_txdescs[(x)]) 209 #define WM_CDRXOFF(x) WM_CDOFF(wcd_rxdescs[(x)]) 210 211 /* 212 * Software state for transmit jobs. 213 */ 214 struct wm_txsoft { 215 struct mbuf *txs_mbuf; /* head of our mbuf chain */ 216 bus_dmamap_t txs_dmamap; /* our DMA map */ 217 int txs_firstdesc; /* first descriptor in packet */ 218 int txs_lastdesc; /* last descriptor in packet */ 219 int txs_ndesc; /* # of descriptors used */ 220 }; 221 222 /* 223 * Software state for receive buffers. Each descriptor gets a 224 * 2k (MCLBYTES) buffer and a DMA map. For packets which fill 225 * more than one buffer, we chain them together. 226 */ 227 struct wm_rxsoft { 228 struct mbuf *rxs_mbuf; /* head of our mbuf chain */ 229 bus_dmamap_t rxs_dmamap; /* our DMA map */ 230 }; 231 232 typedef enum { 233 WM_T_unknown = 0, 234 WM_T_82542_2_0, /* i82542 2.0 (really old) */ 235 WM_T_82542_2_1, /* i82542 2.1+ (old) */ 236 WM_T_82543, /* i82543 */ 237 WM_T_82544, /* i82544 */ 238 WM_T_82540, /* i82540 */ 239 WM_T_82545, /* i82545 */ 240 WM_T_82545_3, /* i82545 3.0+ */ 241 WM_T_82546, /* i82546 */ 242 WM_T_82546_3, /* i82546 3.0+ */ 243 WM_T_82541, /* i82541 */ 244 WM_T_82541_2, /* i82541 2.0+ */ 245 WM_T_82547, /* i82547 */ 246 WM_T_82547_2, /* i82547 2.0+ */ 247 WM_T_82571, /* i82571 */ 248 WM_T_82572, /* i82572 */ 249 WM_T_82573, /* i82573 */ 250 WM_T_82574, /* i82574 */ 251 WM_T_80003, /* i80003 */ 252 WM_T_ICH8, /* ICH8 LAN */ 253 WM_T_ICH9, /* ICH9 LAN */ 254 WM_T_ICH10, /* ICH10 LAN */ 255 } wm_chip_type; 256 257 #define WM_LINKUP_TIMEOUT 50 258 259 /* 260 * Software state per device. 261 */ 262 struct wm_softc { 263 device_t sc_dev; /* generic device information */ 264 bus_space_tag_t sc_st; /* bus space tag */ 265 bus_space_handle_t sc_sh; /* bus space handle */ 266 bus_space_tag_t sc_iot; /* I/O space tag */ 267 bus_space_handle_t sc_ioh; /* I/O space handle */ 268 bus_space_tag_t sc_flasht; /* flash registers space tag */ 269 bus_space_handle_t sc_flashh; /* flash registers space handle */ 270 bus_dma_tag_t sc_dmat; /* bus DMA tag */ 271 struct ethercom sc_ethercom; /* ethernet common data */ 272 pci_chipset_tag_t sc_pc; 273 pcitag_t sc_pcitag; 274 275 wm_chip_type sc_type; /* chip type */ 276 int sc_flags; /* flags; see below */ 277 int sc_if_flags; /* last if_flags */ 278 int sc_bus_speed; /* PCI/PCIX bus speed */ 279 int sc_pcix_offset; /* PCIX capability register offset */ 280 int sc_flowflags; /* 802.3x flow control flags */ 281 282 void *sc_ih; /* interrupt cookie */ 283 284 int sc_ee_addrbits; /* EEPROM address bits */ 285 286 struct mii_data sc_mii; /* MII/media information */ 287 288 callout_t sc_tick_ch; /* tick callout */ 289 290 bus_dmamap_t sc_cddmamap; /* control data DMA map */ 291 #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr 292 293 int sc_align_tweak; 294 295 /* 296 * Software state for the transmit and receive descriptors. 297 */ 298 int sc_txnum; /* must be a power of two */ 299 struct wm_txsoft sc_txsoft[WM_TXQUEUELEN_MAX]; 300 struct wm_rxsoft sc_rxsoft[WM_NRXDESC]; 301 302 /* 303 * Control data structures. 304 */ 305 int sc_ntxdesc; /* must be a power of two */ 306 struct wm_control_data_82544 *sc_control_data; 307 #define sc_txdescs sc_control_data->wcd_txdescs 308 #define sc_rxdescs sc_control_data->wcd_rxdescs 309 310 #ifdef WM_EVENT_COUNTERS 311 /* Event counters. */ 312 struct evcnt sc_ev_txsstall; /* Tx stalled due to no txs */ 313 struct evcnt sc_ev_txdstall; /* Tx stalled due to no txd */ 314 struct evcnt sc_ev_txfifo_stall;/* Tx FIFO stalls (82547) */ 315 struct evcnt sc_ev_txdw; /* Tx descriptor interrupts */ 316 struct evcnt sc_ev_txqe; /* Tx queue empty interrupts */ 317 struct evcnt sc_ev_rxintr; /* Rx interrupts */ 318 struct evcnt sc_ev_linkintr; /* Link interrupts */ 319 320 struct evcnt sc_ev_rxipsum; /* IP checksums checked in-bound */ 321 struct evcnt sc_ev_rxtusum; /* TCP/UDP cksums checked in-bound */ 322 struct evcnt sc_ev_txipsum; /* IP checksums comp. out-bound */ 323 struct evcnt sc_ev_txtusum; /* TCP/UDP cksums comp. out-bound */ 324 struct evcnt sc_ev_txtusum6; /* TCP/UDP v6 cksums comp. out-bound */ 325 struct evcnt sc_ev_txtso; /* TCP seg offload out-bound (IPv4) */ 326 struct evcnt sc_ev_txtso6; /* TCP seg offload out-bound (IPv6) */ 327 struct evcnt sc_ev_txtsopain; /* painful header manip. for TSO */ 328 329 struct evcnt sc_ev_txseg[WM_NTXSEGS]; /* Tx packets w/ N segments */ 330 struct evcnt sc_ev_txdrop; /* Tx packets dropped (too many segs) */ 331 332 struct evcnt sc_ev_tu; /* Tx underrun */ 333 334 struct evcnt sc_ev_tx_xoff; /* Tx PAUSE(!0) frames */ 335 struct evcnt sc_ev_tx_xon; /* Tx PAUSE(0) frames */ 336 struct evcnt sc_ev_rx_xoff; /* Rx PAUSE(!0) frames */ 337 struct evcnt sc_ev_rx_xon; /* Rx PAUSE(0) frames */ 338 struct evcnt sc_ev_rx_macctl; /* Rx Unsupported */ 339 #endif /* WM_EVENT_COUNTERS */ 340 341 bus_addr_t sc_tdt_reg; /* offset of TDT register */ 342 343 int sc_txfree; /* number of free Tx descriptors */ 344 int sc_txnext; /* next ready Tx descriptor */ 345 346 int sc_txsfree; /* number of free Tx jobs */ 347 int sc_txsnext; /* next free Tx job */ 348 int sc_txsdirty; /* dirty Tx jobs */ 349 350 /* These 5 variables are used only on the 82547. */ 351 int sc_txfifo_size; /* Tx FIFO size */ 352 int sc_txfifo_head; /* current head of FIFO */ 353 uint32_t sc_txfifo_addr; /* internal address of start of FIFO */ 354 int sc_txfifo_stall; /* Tx FIFO is stalled */ 355 callout_t sc_txfifo_ch; /* Tx FIFO stall work-around timer */ 356 357 bus_addr_t sc_rdt_reg; /* offset of RDT register */ 358 359 int sc_rxptr; /* next ready Rx descriptor/queue ent */ 360 int sc_rxdiscard; 361 int sc_rxlen; 362 struct mbuf *sc_rxhead; 363 struct mbuf *sc_rxtail; 364 struct mbuf **sc_rxtailp; 365 366 uint32_t sc_ctrl; /* prototype CTRL register */ 367 #if 0 368 uint32_t sc_ctrl_ext; /* prototype CTRL_EXT register */ 369 #endif 370 uint32_t sc_icr; /* prototype interrupt bits */ 371 uint32_t sc_itr; /* prototype intr throttling reg */ 372 uint32_t sc_tctl; /* prototype TCTL register */ 373 uint32_t sc_rctl; /* prototype RCTL register */ 374 uint32_t sc_txcw; /* prototype TXCW register */ 375 uint32_t sc_tipg; /* prototype TIPG register */ 376 uint32_t sc_fcrtl; /* prototype FCRTL register */ 377 uint32_t sc_pba; /* prototype PBA register */ 378 379 int sc_tbi_linkup; /* TBI link status */ 380 int sc_tbi_anegticks; /* autonegotiation ticks */ 381 int sc_tbi_ticks; /* tbi ticks */ 382 int sc_tbi_nrxcfg; /* count of ICR_RXCFG */ 383 int sc_tbi_lastnrxcfg; /* count of ICR_RXCFG (on last tick) */ 384 385 int sc_mchash_type; /* multicast filter offset */ 386 387 #if NRND > 0 388 rndsource_element_t rnd_source; /* random source */ 389 #endif 390 int sc_ich8_flash_base; 391 int sc_ich8_flash_bank_size; 392 }; 393 394 #define WM_RXCHAIN_RESET(sc) \ 395 do { \ 396 (sc)->sc_rxtailp = &(sc)->sc_rxhead; \ 397 *(sc)->sc_rxtailp = NULL; \ 398 (sc)->sc_rxlen = 0; \ 399 } while (/*CONSTCOND*/0) 400 401 #define WM_RXCHAIN_LINK(sc, m) \ 402 do { \ 403 *(sc)->sc_rxtailp = (sc)->sc_rxtail = (m); \ 404 (sc)->sc_rxtailp = &(m)->m_next; \ 405 } while (/*CONSTCOND*/0) 406 407 /* sc_flags */ 408 #define WM_F_HAS_MII 0x0001 /* has MII */ 409 #define WM_F_EEPROM_HANDSHAKE 0x0002 /* requires EEPROM handshake */ 410 #define WM_F_EEPROM_SEMAPHORE 0x0004 /* EEPROM with semaphore */ 411 #define WM_F_EEPROM_EERDEEWR 0x0008 /* EEPROM access via EERD/EEWR */ 412 #define WM_F_EEPROM_SPI 0x0010 /* EEPROM is SPI */ 413 #define WM_F_EEPROM_FLASH 0x0020 /* EEPROM is FLASH */ 414 #define WM_F_EEPROM_INVALID 0x0040 /* EEPROM not present (bad checksum) */ 415 #define WM_F_IOH_VALID 0x0080 /* I/O handle is valid */ 416 #define WM_F_BUS64 0x0100 /* bus is 64-bit */ 417 #define WM_F_PCIX 0x0200 /* bus is PCI-X */ 418 #define WM_F_CSA 0x0400 /* bus is CSA */ 419 #define WM_F_PCIE 0x0800 /* bus is PCI-Express */ 420 #define WM_F_SWFW_SYNC 0x1000 /* Software-Firmware synchronisation */ 421 #define WM_F_SWFWHW_SYNC 0x2000 /* Software-Firmware synchronisation */ 422 423 #ifdef WM_EVENT_COUNTERS 424 #define WM_EVCNT_INCR(ev) (ev)->ev_count++ 425 #define WM_EVCNT_ADD(ev, val) (ev)->ev_count += (val) 426 #else 427 #define WM_EVCNT_INCR(ev) /* nothing */ 428 #define WM_EVCNT_ADD(ev, val) /* nothing */ 429 #endif 430 431 #define CSR_READ(sc, reg) \ 432 bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg)) 433 #define CSR_WRITE(sc, reg, val) \ 434 bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) 435 #define CSR_WRITE_FLUSH(sc) \ 436 (void) CSR_READ((sc), WMREG_STATUS) 437 438 #define ICH8_FLASH_READ32(sc, reg) \ 439 bus_space_read_4((sc)->sc_flasht, (sc)->sc_flashh, (reg)) 440 #define ICH8_FLASH_WRITE32(sc, reg, data) \ 441 bus_space_write_4((sc)->sc_flasht, (sc)->sc_flashh, (reg), (data)) 442 443 #define ICH8_FLASH_READ16(sc, reg) \ 444 bus_space_read_2((sc)->sc_flasht, (sc)->sc_flashh, (reg)) 445 #define ICH8_FLASH_WRITE16(sc, reg, data) \ 446 bus_space_write_2((sc)->sc_flasht, (sc)->sc_flashh, (reg), (data)) 447 448 #define WM_CDTXADDR(sc, x) ((sc)->sc_cddma + WM_CDTXOFF((x))) 449 #define WM_CDRXADDR(sc, x) ((sc)->sc_cddma + WM_CDRXOFF((x))) 450 451 #define WM_CDTXADDR_LO(sc, x) (WM_CDTXADDR((sc), (x)) & 0xffffffffU) 452 #define WM_CDTXADDR_HI(sc, x) \ 453 (sizeof(bus_addr_t) == 8 ? \ 454 (uint64_t)WM_CDTXADDR((sc), (x)) >> 32 : 0) 455 456 #define WM_CDRXADDR_LO(sc, x) (WM_CDRXADDR((sc), (x)) & 0xffffffffU) 457 #define WM_CDRXADDR_HI(sc, x) \ 458 (sizeof(bus_addr_t) == 8 ? \ 459 (uint64_t)WM_CDRXADDR((sc), (x)) >> 32 : 0) 460 461 #define WM_CDTXSYNC(sc, x, n, ops) \ 462 do { \ 463 int __x, __n; \ 464 \ 465 __x = (x); \ 466 __n = (n); \ 467 \ 468 /* If it will wrap around, sync to the end of the ring. */ \ 469 if ((__x + __n) > WM_NTXDESC(sc)) { \ 470 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 471 WM_CDTXOFF(__x), sizeof(wiseman_txdesc_t) * \ 472 (WM_NTXDESC(sc) - __x), (ops)); \ 473 __n -= (WM_NTXDESC(sc) - __x); \ 474 __x = 0; \ 475 } \ 476 \ 477 /* Now sync whatever is left. */ \ 478 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 479 WM_CDTXOFF(__x), sizeof(wiseman_txdesc_t) * __n, (ops)); \ 480 } while (/*CONSTCOND*/0) 481 482 #define WM_CDRXSYNC(sc, x, ops) \ 483 do { \ 484 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 485 WM_CDRXOFF((x)), sizeof(wiseman_rxdesc_t), (ops)); \ 486 } while (/*CONSTCOND*/0) 487 488 #define WM_INIT_RXDESC(sc, x) \ 489 do { \ 490 struct wm_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \ 491 wiseman_rxdesc_t *__rxd = &(sc)->sc_rxdescs[(x)]; \ 492 struct mbuf *__m = __rxs->rxs_mbuf; \ 493 \ 494 /* \ 495 * Note: We scoot the packet forward 2 bytes in the buffer \ 496 * so that the payload after the Ethernet header is aligned \ 497 * to a 4-byte boundary. \ 498 * \ 499 * XXX BRAINDAMAGE ALERT! \ 500 * The stupid chip uses the same size for every buffer, which \ 501 * is set in the Receive Control register. We are using the 2K \ 502 * size option, but what we REALLY want is (2K - 2)! For this \ 503 * reason, we can't "scoot" packets longer than the standard \ 504 * Ethernet MTU. On strict-alignment platforms, if the total \ 505 * size exceeds (2K - 2) we set align_tweak to 0 and let \ 506 * the upper layer copy the headers. \ 507 */ \ 508 __m->m_data = __m->m_ext.ext_buf + (sc)->sc_align_tweak; \ 509 \ 510 wm_set_dma_addr(&__rxd->wrx_addr, \ 511 __rxs->rxs_dmamap->dm_segs[0].ds_addr + (sc)->sc_align_tweak); \ 512 __rxd->wrx_len = 0; \ 513 __rxd->wrx_cksum = 0; \ 514 __rxd->wrx_status = 0; \ 515 __rxd->wrx_errors = 0; \ 516 __rxd->wrx_special = 0; \ 517 WM_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ 518 \ 519 CSR_WRITE((sc), (sc)->sc_rdt_reg, (x)); \ 520 } while (/*CONSTCOND*/0) 521 522 static void wm_start(struct ifnet *); 523 static void wm_watchdog(struct ifnet *); 524 static int wm_ioctl(struct ifnet *, u_long, void *); 525 static int wm_init(struct ifnet *); 526 static void wm_stop(struct ifnet *, int); 527 528 static void wm_reset(struct wm_softc *); 529 static void wm_rxdrain(struct wm_softc *); 530 static int wm_add_rxbuf(struct wm_softc *, int); 531 static int wm_read_eeprom(struct wm_softc *, int, int, u_int16_t *); 532 static int wm_read_eeprom_eerd(struct wm_softc *, int, int, u_int16_t *); 533 static int wm_validate_eeprom_checksum(struct wm_softc *); 534 static void wm_tick(void *); 535 536 static void wm_set_filter(struct wm_softc *); 537 538 static int wm_intr(void *); 539 static void wm_txintr(struct wm_softc *); 540 static void wm_rxintr(struct wm_softc *); 541 static void wm_linkintr(struct wm_softc *, uint32_t); 542 543 static void wm_tbi_mediainit(struct wm_softc *); 544 static int wm_tbi_mediachange(struct ifnet *); 545 static void wm_tbi_mediastatus(struct ifnet *, struct ifmediareq *); 546 547 static void wm_tbi_set_linkled(struct wm_softc *); 548 static void wm_tbi_check_link(struct wm_softc *); 549 550 static void wm_gmii_reset(struct wm_softc *); 551 552 static int wm_gmii_i82543_readreg(device_t, int, int); 553 static void wm_gmii_i82543_writereg(device_t, int, int, int); 554 555 static int wm_gmii_i82544_readreg(device_t, int, int); 556 static void wm_gmii_i82544_writereg(device_t, int, int, int); 557 558 static int wm_gmii_i80003_readreg(device_t, int, int); 559 static void wm_gmii_i80003_writereg(device_t, int, int, int); 560 561 static int wm_gmii_bm_readreg(device_t, int, int); 562 static void wm_gmii_bm_writereg(device_t, int, int, int); 563 564 static void wm_gmii_statchg(device_t); 565 566 static void wm_gmii_mediainit(struct wm_softc *); 567 static int wm_gmii_mediachange(struct ifnet *); 568 static void wm_gmii_mediastatus(struct ifnet *, struct ifmediareq *); 569 570 static int wm_kmrn_readreg(struct wm_softc *, int); 571 static void wm_kmrn_writereg(struct wm_softc *, int, int); 572 573 static int wm_match(device_t, cfdata_t, void *); 574 static void wm_attach(device_t, device_t, void *); 575 static int wm_is_onboard_nvm_eeprom(struct wm_softc *); 576 static void wm_get_auto_rd_done(struct wm_softc *); 577 static int wm_get_swsm_semaphore(struct wm_softc *); 578 static void wm_put_swsm_semaphore(struct wm_softc *); 579 static int wm_poll_eerd_eewr_done(struct wm_softc *, int); 580 static int wm_get_swfw_semaphore(struct wm_softc *, uint16_t); 581 static void wm_put_swfw_semaphore(struct wm_softc *, uint16_t); 582 static int wm_get_swfwhw_semaphore(struct wm_softc *); 583 static void wm_put_swfwhw_semaphore(struct wm_softc *); 584 585 static int wm_read_eeprom_ich8(struct wm_softc *, int, int, uint16_t *); 586 static int32_t wm_ich8_cycle_init(struct wm_softc *); 587 static int32_t wm_ich8_flash_cycle(struct wm_softc *, uint32_t); 588 static int32_t wm_read_ich8_data(struct wm_softc *, uint32_t, 589 uint32_t, uint16_t *); 590 static int32_t wm_read_ich8_byte(struct wm_softc *sc, uint32_t, uint8_t *); 591 static int32_t wm_read_ich8_word(struct wm_softc *sc, uint32_t, uint16_t *); 592 static void wm_82547_txfifo_stall(void *); 593 static int wm_check_mng_mode(struct wm_softc *); 594 static int wm_check_mng_mode_ich8lan(struct wm_softc *); 595 #if 0 596 static int wm_check_mng_mode_82574(struct wm_softc *); 597 #endif 598 static int wm_check_mng_mode_generic(struct wm_softc *); 599 static void wm_get_hw_control(struct wm_softc *); 600 static int wm_check_for_link(struct wm_softc *); 601 602 CFATTACH_DECL_NEW(wm, sizeof(struct wm_softc), 603 wm_match, wm_attach, NULL, NULL); 604 605 606 /* 607 * Devices supported by this driver. 608 */ 609 static const struct wm_product { 610 pci_vendor_id_t wmp_vendor; 611 pci_product_id_t wmp_product; 612 const char *wmp_name; 613 wm_chip_type wmp_type; 614 int wmp_flags; 615 #define WMP_F_1000X 0x01 616 #define WMP_F_1000T 0x02 617 } wm_products[] = { 618 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82542, 619 "Intel i82542 1000BASE-X Ethernet", 620 WM_T_82542_2_1, WMP_F_1000X }, 621 622 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82543GC_FIBER, 623 "Intel i82543GC 1000BASE-X Ethernet", 624 WM_T_82543, WMP_F_1000X }, 625 626 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82543GC_COPPER, 627 "Intel i82543GC 1000BASE-T Ethernet", 628 WM_T_82543, WMP_F_1000T }, 629 630 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544EI_COPPER, 631 "Intel i82544EI 1000BASE-T Ethernet", 632 WM_T_82544, WMP_F_1000T }, 633 634 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544EI_FIBER, 635 "Intel i82544EI 1000BASE-X Ethernet", 636 WM_T_82544, WMP_F_1000X }, 637 638 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544GC_COPPER, 639 "Intel i82544GC 1000BASE-T Ethernet", 640 WM_T_82544, WMP_F_1000T }, 641 642 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544GC_LOM, 643 "Intel i82544GC (LOM) 1000BASE-T Ethernet", 644 WM_T_82544, WMP_F_1000T }, 645 646 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EM, 647 "Intel i82540EM 1000BASE-T Ethernet", 648 WM_T_82540, WMP_F_1000T }, 649 650 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EM_LOM, 651 "Intel i82540EM (LOM) 1000BASE-T Ethernet", 652 WM_T_82540, WMP_F_1000T }, 653 654 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EP_LOM, 655 "Intel i82540EP 1000BASE-T Ethernet", 656 WM_T_82540, WMP_F_1000T }, 657 658 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EP, 659 "Intel i82540EP 1000BASE-T Ethernet", 660 WM_T_82540, WMP_F_1000T }, 661 662 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EP_LP, 663 "Intel i82540EP 1000BASE-T Ethernet", 664 WM_T_82540, WMP_F_1000T }, 665 666 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545EM_COPPER, 667 "Intel i82545EM 1000BASE-T Ethernet", 668 WM_T_82545, WMP_F_1000T }, 669 670 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545GM_COPPER, 671 "Intel i82545GM 1000BASE-T Ethernet", 672 WM_T_82545_3, WMP_F_1000T }, 673 674 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545GM_FIBER, 675 "Intel i82545GM 1000BASE-X Ethernet", 676 WM_T_82545_3, WMP_F_1000X }, 677 #if 0 678 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545GM_SERDES, 679 "Intel i82545GM Gigabit Ethernet (SERDES)", 680 WM_T_82545_3, WMP_F_SERDES }, 681 #endif 682 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_COPPER, 683 "Intel i82546EB 1000BASE-T Ethernet", 684 WM_T_82546, WMP_F_1000T }, 685 686 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_QUAD, 687 "Intel i82546EB 1000BASE-T Ethernet", 688 WM_T_82546, WMP_F_1000T }, 689 690 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545EM_FIBER, 691 "Intel i82545EM 1000BASE-X Ethernet", 692 WM_T_82545, WMP_F_1000X }, 693 694 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_FIBER, 695 "Intel i82546EB 1000BASE-X Ethernet", 696 WM_T_82546, WMP_F_1000X }, 697 698 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_COPPER, 699 "Intel i82546GB 1000BASE-T Ethernet", 700 WM_T_82546_3, WMP_F_1000T }, 701 702 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_FIBER, 703 "Intel i82546GB 1000BASE-X Ethernet", 704 WM_T_82546_3, WMP_F_1000X }, 705 #if 0 706 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_SERDES, 707 "Intel i82546GB Gigabit Ethernet (SERDES)", 708 WM_T_82546_3, WMP_F_SERDES }, 709 #endif 710 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_QUAD_COPPER, 711 "i82546GB quad-port Gigabit Ethernet", 712 WM_T_82546_3, WMP_F_1000T }, 713 714 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_QUAD_COPPER_KSP3, 715 "i82546GB quad-port Gigabit Ethernet (KSP3)", 716 WM_T_82546_3, WMP_F_1000T }, 717 718 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_PCIE, 719 "Intel PRO/1000MT (82546GB)", 720 WM_T_82546_3, WMP_F_1000T }, 721 722 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541EI, 723 "Intel i82541EI 1000BASE-T Ethernet", 724 WM_T_82541, WMP_F_1000T }, 725 726 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541ER_LOM, 727 "Intel i82541ER (LOM) 1000BASE-T Ethernet", 728 WM_T_82541, WMP_F_1000T }, 729 730 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541EI_MOBILE, 731 "Intel i82541EI Mobile 1000BASE-T Ethernet", 732 WM_T_82541, WMP_F_1000T }, 733 734 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541ER, 735 "Intel i82541ER 1000BASE-T Ethernet", 736 WM_T_82541_2, WMP_F_1000T }, 737 738 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541GI, 739 "Intel i82541GI 1000BASE-T Ethernet", 740 WM_T_82541_2, WMP_F_1000T }, 741 742 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541GI_MOBILE, 743 "Intel i82541GI Mobile 1000BASE-T Ethernet", 744 WM_T_82541_2, WMP_F_1000T }, 745 746 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541PI, 747 "Intel i82541PI 1000BASE-T Ethernet", 748 WM_T_82541_2, WMP_F_1000T }, 749 750 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82547EI, 751 "Intel i82547EI 1000BASE-T Ethernet", 752 WM_T_82547, WMP_F_1000T }, 753 754 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82547EI_MOBILE, 755 "Intel i82547EI Mobile 1000BASE-T Ethernet", 756 WM_T_82547, WMP_F_1000T }, 757 758 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82547GI, 759 "Intel i82547GI 1000BASE-T Ethernet", 760 WM_T_82547_2, WMP_F_1000T }, 761 762 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_COPPER, 763 "Intel PRO/1000 PT (82571EB)", 764 WM_T_82571, WMP_F_1000T }, 765 766 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_FIBER, 767 "Intel PRO/1000 PF (82571EB)", 768 WM_T_82571, WMP_F_1000X }, 769 #if 0 770 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_SERDES, 771 "Intel PRO/1000 PB (82571EB)", 772 WM_T_82571, WMP_F_SERDES }, 773 #endif 774 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_QUAD_COPPER, 775 "Intel PRO/1000 QT (82571EB)", 776 WM_T_82571, WMP_F_1000T }, 777 778 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82572EI_COPPER, 779 "Intel i82572EI 1000baseT Ethernet", 780 WM_T_82572, WMP_F_1000T }, 781 782 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571GB_QUAD_COPPER, 783 "Intel PRO/1000 PT Quad Port Server Adapter", 784 WM_T_82571, WMP_F_1000T, }, 785 786 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82572EI_FIBER, 787 "Intel i82572EI 1000baseX Ethernet", 788 WM_T_82572, WMP_F_1000X }, 789 #if 0 790 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82572EI_SERDES, 791 "Intel i82572EI Gigabit Ethernet (SERDES)", 792 WM_T_82572, WMP_F_SERDES }, 793 #endif 794 795 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82572EI, 796 "Intel i82572EI 1000baseT Ethernet", 797 WM_T_82572, WMP_F_1000T }, 798 799 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82573E, 800 "Intel i82573E", 801 WM_T_82573, WMP_F_1000T }, 802 803 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82573E_IAMT, 804 "Intel i82573E IAMT", 805 WM_T_82573, WMP_F_1000T }, 806 807 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82573L, 808 "Intel i82573L Gigabit Ethernet", 809 WM_T_82573, WMP_F_1000T }, 810 811 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82574L, 812 "Intel i82574L", 813 WM_T_82574, WMP_F_1000T }, 814 815 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_80K3LAN_CPR_DPT, 816 "i80003 dual 1000baseT Ethernet", 817 WM_T_80003, WMP_F_1000T }, 818 819 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_80K3LAN_FIB_DPT, 820 "i80003 dual 1000baseX Ethernet", 821 WM_T_80003, WMP_F_1000T }, 822 #if 0 823 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_80K3LAN_SDS_DPT, 824 "Intel i80003ES2 dual Gigabit Ethernet (SERDES)", 825 WM_T_80003, WMP_F_SERDES }, 826 #endif 827 828 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_80K3LAN_CPR_SPT, 829 "Intel i80003 1000baseT Ethernet", 830 WM_T_80003, WMP_F_1000T }, 831 #if 0 832 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_80K3LAN_SDS_SPT, 833 "Intel i80003 Gigabit Ethernet (SERDES)", 834 WM_T_80003, WMP_F_SERDES }, 835 #endif 836 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_M_AMT, 837 "Intel i82801H (M_AMT) LAN Controller", 838 WM_T_ICH8, WMP_F_1000T }, 839 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_AMT, 840 "Intel i82801H (AMT) LAN Controller", 841 WM_T_ICH8, WMP_F_1000T }, 842 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_LAN, 843 "Intel i82801H LAN Controller", 844 WM_T_ICH8, WMP_F_1000T }, 845 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_IFE_LAN, 846 "Intel i82801H (IFE) LAN Controller", 847 WM_T_ICH8, WMP_F_1000T }, 848 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_M_LAN, 849 "Intel i82801H (M) LAN Controller", 850 WM_T_ICH8, WMP_F_1000T }, 851 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_IFE_GT, 852 "Intel i82801H IFE (GT) LAN Controller", 853 WM_T_ICH8, WMP_F_1000T }, 854 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_IFE_G, 855 "Intel i82801H IFE (G) LAN Controller", 856 WM_T_ICH8, WMP_F_1000T }, 857 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IGP_AMT, 858 "82801I (AMT) LAN Controller", 859 WM_T_ICH9, WMP_F_1000T }, 860 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IFE, 861 "82801I LAN Controller", 862 WM_T_ICH9, WMP_F_1000T }, 863 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IFE_G, 864 "82801I (G) LAN Controller", 865 WM_T_ICH9, WMP_F_1000T }, 866 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IFE_GT, 867 "82801I (GT) LAN Controller", 868 WM_T_ICH9, WMP_F_1000T }, 869 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IGP_C, 870 "82801I (C) LAN Controller", 871 WM_T_ICH9, WMP_F_1000T }, 872 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IGP_M, 873 "82801I mobile LAN Controller", 874 WM_T_ICH9, WMP_F_1000T }, 875 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801H_IGP_M_V, 876 "82801I mobile (V) LAN Controller", 877 WM_T_ICH9, WMP_F_1000T }, 878 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801I_IGP_M_AMT, 879 "82801I mobile (AMT) LAN Controller", 880 WM_T_ICH9, WMP_F_1000T }, 881 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82567LM_3, 882 "82567LM-3 LAN Controller", 883 WM_T_ICH10, WMP_F_1000T }, 884 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82567LF_3, 885 "82567LF-3 LAN Controller", 886 WM_T_ICH10, WMP_F_1000T }, 887 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801J_D_BM_LF, 888 "i82801J (LF) LAN Controller", 889 WM_T_ICH10, WMP_F_1000T }, 890 { 0, 0, 891 NULL, 892 0, 0 }, 893 }; 894 895 #ifdef WM_EVENT_COUNTERS 896 static char wm_txseg_evcnt_names[WM_NTXSEGS][sizeof("txsegXXX")]; 897 #endif /* WM_EVENT_COUNTERS */ 898 899 #if 0 /* Not currently used */ 900 static inline uint32_t 901 wm_io_read(struct wm_softc *sc, int reg) 902 { 903 904 bus_space_write_4(sc->sc_iot, sc->sc_ioh, 0, reg); 905 return (bus_space_read_4(sc->sc_iot, sc->sc_ioh, 4)); 906 } 907 #endif 908 909 static inline void 910 wm_io_write(struct wm_softc *sc, int reg, uint32_t val) 911 { 912 913 bus_space_write_4(sc->sc_iot, sc->sc_ioh, 0, reg); 914 bus_space_write_4(sc->sc_iot, sc->sc_ioh, 4, val); 915 } 916 917 static inline void 918 wm_set_dma_addr(volatile wiseman_addr_t *wa, bus_addr_t v) 919 { 920 wa->wa_low = htole32(v & 0xffffffffU); 921 if (sizeof(bus_addr_t) == 8) 922 wa->wa_high = htole32((uint64_t) v >> 32); 923 else 924 wa->wa_high = 0; 925 } 926 927 static const struct wm_product * 928 wm_lookup(const struct pci_attach_args *pa) 929 { 930 const struct wm_product *wmp; 931 932 for (wmp = wm_products; wmp->wmp_name != NULL; wmp++) { 933 if (PCI_VENDOR(pa->pa_id) == wmp->wmp_vendor && 934 PCI_PRODUCT(pa->pa_id) == wmp->wmp_product) 935 return (wmp); 936 } 937 return (NULL); 938 } 939 940 static int 941 wm_match(device_t parent, cfdata_t cf, void *aux) 942 { 943 struct pci_attach_args *pa = aux; 944 945 if (wm_lookup(pa) != NULL) 946 return (1); 947 948 return (0); 949 } 950 951 static void 952 wm_attach(device_t parent, device_t self, void *aux) 953 { 954 struct wm_softc *sc = device_private(self); 955 struct pci_attach_args *pa = aux; 956 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 957 pci_chipset_tag_t pc = pa->pa_pc; 958 pci_intr_handle_t ih; 959 size_t cdata_size; 960 const char *intrstr = NULL; 961 const char *eetype, *xname; 962 bus_space_tag_t memt; 963 bus_space_handle_t memh; 964 bus_dma_segment_t seg; 965 int memh_valid; 966 int i, rseg, error; 967 const struct wm_product *wmp; 968 prop_data_t ea; 969 prop_number_t pn; 970 uint8_t enaddr[ETHER_ADDR_LEN]; 971 uint16_t myea[ETHER_ADDR_LEN / 2], cfg1, cfg2, swdpin; 972 pcireg_t preg, memtype; 973 uint32_t reg; 974 975 sc->sc_dev = self; 976 callout_init(&sc->sc_tick_ch, 0); 977 978 wmp = wm_lookup(pa); 979 if (wmp == NULL) { 980 printf("\n"); 981 panic("wm_attach: impossible"); 982 } 983 984 sc->sc_pc = pa->pa_pc; 985 sc->sc_pcitag = pa->pa_tag; 986 987 if (pci_dma64_available(pa)) 988 sc->sc_dmat = pa->pa_dmat64; 989 else 990 sc->sc_dmat = pa->pa_dmat; 991 992 preg = PCI_REVISION(pci_conf_read(pc, pa->pa_tag, PCI_CLASS_REG)); 993 aprint_naive(": Ethernet controller\n"); 994 aprint_normal(": %s, rev. %d\n", wmp->wmp_name, preg); 995 996 sc->sc_type = wmp->wmp_type; 997 if (sc->sc_type < WM_T_82543) { 998 if (preg < 2) { 999 aprint_error_dev(sc->sc_dev, 1000 "i82542 must be at least rev. 2\n"); 1001 return; 1002 } 1003 if (preg < 3) 1004 sc->sc_type = WM_T_82542_2_0; 1005 } 1006 1007 /* 1008 * Map the device. All devices support memory-mapped acccess, 1009 * and it is really required for normal operation. 1010 */ 1011 memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, WM_PCI_MMBA); 1012 switch (memtype) { 1013 case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT: 1014 case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT: 1015 memh_valid = (pci_mapreg_map(pa, WM_PCI_MMBA, 1016 memtype, 0, &memt, &memh, NULL, NULL) == 0); 1017 break; 1018 default: 1019 memh_valid = 0; 1020 } 1021 1022 if (memh_valid) { 1023 sc->sc_st = memt; 1024 sc->sc_sh = memh; 1025 } else { 1026 aprint_error_dev(sc->sc_dev, 1027 "unable to map device registers\n"); 1028 return; 1029 } 1030 1031 /* 1032 * In addition, i82544 and later support I/O mapped indirect 1033 * register access. It is not desirable (nor supported in 1034 * this driver) to use it for normal operation, though it is 1035 * required to work around bugs in some chip versions. 1036 */ 1037 if (sc->sc_type >= WM_T_82544) { 1038 /* First we have to find the I/O BAR. */ 1039 for (i = PCI_MAPREG_START; i < PCI_MAPREG_END; i += 4) { 1040 if (pci_mapreg_type(pa->pa_pc, pa->pa_tag, i) == 1041 PCI_MAPREG_TYPE_IO) 1042 break; 1043 } 1044 if (i == PCI_MAPREG_END) 1045 aprint_error_dev(sc->sc_dev, 1046 "WARNING: unable to find I/O BAR\n"); 1047 else { 1048 /* 1049 * The i8254x doesn't apparently respond when the 1050 * I/O BAR is 0, which looks somewhat like it's not 1051 * been configured. 1052 */ 1053 preg = pci_conf_read(pc, pa->pa_tag, i); 1054 if (PCI_MAPREG_MEM_ADDR(preg) == 0) { 1055 aprint_error_dev(sc->sc_dev, 1056 "WARNING: I/O BAR at zero.\n"); 1057 } else if (pci_mapreg_map(pa, i, PCI_MAPREG_TYPE_IO, 1058 0, &sc->sc_iot, &sc->sc_ioh, 1059 NULL, NULL) == 0) { 1060 sc->sc_flags |= WM_F_IOH_VALID; 1061 } else { 1062 aprint_error_dev(sc->sc_dev, 1063 "WARNING: unable to map I/O space\n"); 1064 } 1065 } 1066 1067 } 1068 1069 /* Enable bus mastering. Disable MWI on the i82542 2.0. */ 1070 preg = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 1071 preg |= PCI_COMMAND_MASTER_ENABLE; 1072 if (sc->sc_type < WM_T_82542_2_1) 1073 preg &= ~PCI_COMMAND_INVALIDATE_ENABLE; 1074 pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, preg); 1075 1076 /* power up chip */ 1077 if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self, 1078 NULL)) && error != EOPNOTSUPP) { 1079 aprint_error_dev(sc->sc_dev, "cannot activate %d\n", error); 1080 return; 1081 } 1082 1083 /* 1084 * Map and establish our interrupt. 1085 */ 1086 if (pci_intr_map(pa, &ih)) { 1087 aprint_error_dev(sc->sc_dev, "unable to map interrupt\n"); 1088 return; 1089 } 1090 intrstr = pci_intr_string(pc, ih); 1091 sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wm_intr, sc); 1092 if (sc->sc_ih == NULL) { 1093 aprint_error_dev(sc->sc_dev, "unable to establish interrupt"); 1094 if (intrstr != NULL) 1095 aprint_error(" at %s", intrstr); 1096 aprint_error("\n"); 1097 return; 1098 } 1099 aprint_normal_dev(sc->sc_dev, "interrupting at %s\n", intrstr); 1100 1101 /* 1102 * Determine a few things about the bus we're connected to. 1103 */ 1104 if (sc->sc_type < WM_T_82543) { 1105 /* We don't really know the bus characteristics here. */ 1106 sc->sc_bus_speed = 33; 1107 } else if (sc->sc_type == WM_T_82547 || sc->sc_type == WM_T_82547_2) { 1108 /* 1109 * CSA (Communication Streaming Architecture) is about as fast 1110 * a 32-bit 66MHz PCI Bus. 1111 */ 1112 sc->sc_flags |= WM_F_CSA; 1113 sc->sc_bus_speed = 66; 1114 aprint_verbose_dev(sc->sc_dev, 1115 "Communication Streaming Architecture\n"); 1116 if (sc->sc_type == WM_T_82547) { 1117 callout_init(&sc->sc_txfifo_ch, 0); 1118 callout_setfunc(&sc->sc_txfifo_ch, 1119 wm_82547_txfifo_stall, sc); 1120 aprint_verbose_dev(sc->sc_dev, 1121 "using 82547 Tx FIFO stall work-around\n"); 1122 } 1123 } else if (sc->sc_type >= WM_T_82571) { 1124 sc->sc_flags |= WM_F_PCIE; 1125 if ((sc->sc_type != WM_T_ICH8) && (sc->sc_type != WM_T_ICH9) 1126 && (sc->sc_type != WM_T_ICH10)) 1127 sc->sc_flags |= WM_F_EEPROM_SEMAPHORE; 1128 aprint_verbose_dev(sc->sc_dev, "PCI-Express bus\n"); 1129 } else { 1130 reg = CSR_READ(sc, WMREG_STATUS); 1131 if (reg & STATUS_BUS64) 1132 sc->sc_flags |= WM_F_BUS64; 1133 if ((reg & STATUS_PCIX_MODE) != 0) { 1134 pcireg_t pcix_cmd, pcix_sts, bytecnt, maxb; 1135 1136 sc->sc_flags |= WM_F_PCIX; 1137 if (pci_get_capability(pa->pa_pc, pa->pa_tag, 1138 PCI_CAP_PCIX, 1139 &sc->sc_pcix_offset, NULL) == 0) 1140 aprint_error_dev(sc->sc_dev, 1141 "unable to find PCIX capability\n"); 1142 else if (sc->sc_type != WM_T_82545_3 && 1143 sc->sc_type != WM_T_82546_3) { 1144 /* 1145 * Work around a problem caused by the BIOS 1146 * setting the max memory read byte count 1147 * incorrectly. 1148 */ 1149 pcix_cmd = pci_conf_read(pa->pa_pc, pa->pa_tag, 1150 sc->sc_pcix_offset + PCI_PCIX_CMD); 1151 pcix_sts = pci_conf_read(pa->pa_pc, pa->pa_tag, 1152 sc->sc_pcix_offset + PCI_PCIX_STATUS); 1153 1154 bytecnt = 1155 (pcix_cmd & PCI_PCIX_CMD_BYTECNT_MASK) >> 1156 PCI_PCIX_CMD_BYTECNT_SHIFT; 1157 maxb = 1158 (pcix_sts & PCI_PCIX_STATUS_MAXB_MASK) >> 1159 PCI_PCIX_STATUS_MAXB_SHIFT; 1160 if (bytecnt > maxb) { 1161 aprint_verbose_dev(sc->sc_dev, 1162 "resetting PCI-X MMRBC: %d -> %d\n", 1163 512 << bytecnt, 512 << maxb); 1164 pcix_cmd = (pcix_cmd & 1165 ~PCI_PCIX_CMD_BYTECNT_MASK) | 1166 (maxb << PCI_PCIX_CMD_BYTECNT_SHIFT); 1167 pci_conf_write(pa->pa_pc, pa->pa_tag, 1168 sc->sc_pcix_offset + PCI_PCIX_CMD, 1169 pcix_cmd); 1170 } 1171 } 1172 } 1173 /* 1174 * The quad port adapter is special; it has a PCIX-PCIX 1175 * bridge on the board, and can run the secondary bus at 1176 * a higher speed. 1177 */ 1178 if (wmp->wmp_product == PCI_PRODUCT_INTEL_82546EB_QUAD) { 1179 sc->sc_bus_speed = (sc->sc_flags & WM_F_PCIX) ? 120 1180 : 66; 1181 } else if (sc->sc_flags & WM_F_PCIX) { 1182 switch (reg & STATUS_PCIXSPD_MASK) { 1183 case STATUS_PCIXSPD_50_66: 1184 sc->sc_bus_speed = 66; 1185 break; 1186 case STATUS_PCIXSPD_66_100: 1187 sc->sc_bus_speed = 100; 1188 break; 1189 case STATUS_PCIXSPD_100_133: 1190 sc->sc_bus_speed = 133; 1191 break; 1192 default: 1193 aprint_error_dev(sc->sc_dev, 1194 "unknown PCIXSPD %d; assuming 66MHz\n", 1195 reg & STATUS_PCIXSPD_MASK); 1196 sc->sc_bus_speed = 66; 1197 } 1198 } else 1199 sc->sc_bus_speed = (reg & STATUS_PCI66) ? 66 : 33; 1200 aprint_verbose_dev(sc->sc_dev, "%d-bit %dMHz %s bus\n", 1201 (sc->sc_flags & WM_F_BUS64) ? 64 : 32, sc->sc_bus_speed, 1202 (sc->sc_flags & WM_F_PCIX) ? "PCIX" : "PCI"); 1203 } 1204 1205 /* 1206 * Allocate the control data structures, and create and load the 1207 * DMA map for it. 1208 * 1209 * NOTE: All Tx descriptors must be in the same 4G segment of 1210 * memory. So must Rx descriptors. We simplify by allocating 1211 * both sets within the same 4G segment. 1212 */ 1213 WM_NTXDESC(sc) = sc->sc_type < WM_T_82544 ? 1214 WM_NTXDESC_82542 : WM_NTXDESC_82544; 1215 cdata_size = sc->sc_type < WM_T_82544 ? 1216 sizeof(struct wm_control_data_82542) : 1217 sizeof(struct wm_control_data_82544); 1218 if ((error = bus_dmamem_alloc(sc->sc_dmat, cdata_size, PAGE_SIZE, 1219 (bus_size_t) 0x100000000ULL, 1220 &seg, 1, &rseg, 0)) != 0) { 1221 aprint_error_dev(sc->sc_dev, 1222 "unable to allocate control data, error = %d\n", 1223 error); 1224 goto fail_0; 1225 } 1226 1227 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, cdata_size, 1228 (void **)&sc->sc_control_data, 1229 BUS_DMA_COHERENT)) != 0) { 1230 aprint_error_dev(sc->sc_dev, 1231 "unable to map control data, error = %d\n", error); 1232 goto fail_1; 1233 } 1234 1235 if ((error = bus_dmamap_create(sc->sc_dmat, cdata_size, 1, cdata_size, 1236 0, 0, &sc->sc_cddmamap)) != 0) { 1237 aprint_error_dev(sc->sc_dev, 1238 "unable to create control data DMA map, error = %d\n", 1239 error); 1240 goto fail_2; 1241 } 1242 1243 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, 1244 sc->sc_control_data, cdata_size, NULL, 1245 0)) != 0) { 1246 aprint_error_dev(sc->sc_dev, 1247 "unable to load control data DMA map, error = %d\n", 1248 error); 1249 goto fail_3; 1250 } 1251 1252 1253 /* 1254 * Create the transmit buffer DMA maps. 1255 */ 1256 WM_TXQUEUELEN(sc) = 1257 (sc->sc_type == WM_T_82547 || sc->sc_type == WM_T_82547_2) ? 1258 WM_TXQUEUELEN_MAX_82547 : WM_TXQUEUELEN_MAX; 1259 for (i = 0; i < WM_TXQUEUELEN(sc); i++) { 1260 if ((error = bus_dmamap_create(sc->sc_dmat, WM_MAXTXDMA, 1261 WM_NTXSEGS, WTX_MAX_LEN, 0, 0, 1262 &sc->sc_txsoft[i].txs_dmamap)) != 0) { 1263 aprint_error_dev(sc->sc_dev, 1264 "unable to create Tx DMA map %d, error = %d\n", 1265 i, error); 1266 goto fail_4; 1267 } 1268 } 1269 1270 /* 1271 * Create the receive buffer DMA maps. 1272 */ 1273 for (i = 0; i < WM_NRXDESC; i++) { 1274 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 1275 MCLBYTES, 0, 0, 1276 &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { 1277 aprint_error_dev(sc->sc_dev, 1278 "unable to create Rx DMA map %d error = %d\n", 1279 i, error); 1280 goto fail_5; 1281 } 1282 sc->sc_rxsoft[i].rxs_mbuf = NULL; 1283 } 1284 1285 /* clear interesting stat counters */ 1286 CSR_READ(sc, WMREG_COLC); 1287 CSR_READ(sc, WMREG_RXERRC); 1288 1289 /* 1290 * Reset the chip to a known state. 1291 */ 1292 wm_reset(sc); 1293 1294 switch (sc->sc_type) { 1295 case WM_T_82571: 1296 case WM_T_82572: 1297 case WM_T_82573: 1298 case WM_T_82574: 1299 case WM_T_80003: 1300 case WM_T_ICH8: 1301 case WM_T_ICH9: 1302 case WM_T_ICH10: 1303 if (wm_check_mng_mode(sc) != 0) 1304 wm_get_hw_control(sc); 1305 break; 1306 default: 1307 break; 1308 } 1309 1310 /* 1311 * Get some information about the EEPROM. 1312 */ 1313 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 1314 || (sc->sc_type == WM_T_ICH10)) { 1315 uint32_t flash_size; 1316 sc->sc_flags |= WM_F_SWFWHW_SYNC | WM_F_EEPROM_FLASH; 1317 memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, WM_ICH8_FLASH); 1318 if (pci_mapreg_map(pa, WM_ICH8_FLASH, memtype, 0, 1319 &sc->sc_flasht, &sc->sc_flashh, NULL, NULL)) { 1320 aprint_error_dev(sc->sc_dev, 1321 "can't map FLASH registers\n"); 1322 return; 1323 } 1324 flash_size = ICH8_FLASH_READ32(sc, ICH_FLASH_GFPREG); 1325 sc->sc_ich8_flash_base = (flash_size & ICH_GFPREG_BASE_MASK) * 1326 ICH_FLASH_SECTOR_SIZE; 1327 sc->sc_ich8_flash_bank_size = 1328 ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1; 1329 sc->sc_ich8_flash_bank_size -= 1330 (flash_size & ICH_GFPREG_BASE_MASK); 1331 sc->sc_ich8_flash_bank_size *= ICH_FLASH_SECTOR_SIZE; 1332 sc->sc_ich8_flash_bank_size /= 2 * sizeof(uint16_t); 1333 } else if (sc->sc_type == WM_T_80003) 1334 sc->sc_flags |= WM_F_EEPROM_EERDEEWR | WM_F_SWFW_SYNC; 1335 else if (sc->sc_type == WM_T_82573) 1336 sc->sc_flags |= WM_F_EEPROM_EERDEEWR; 1337 else if (sc->sc_type == WM_T_82574) 1338 sc->sc_flags |= WM_F_EEPROM_EERDEEWR; 1339 else if (sc->sc_type > WM_T_82544) 1340 sc->sc_flags |= WM_F_EEPROM_HANDSHAKE; 1341 1342 if (sc->sc_type <= WM_T_82544) 1343 sc->sc_ee_addrbits = 6; 1344 else if (sc->sc_type <= WM_T_82546_3) { 1345 reg = CSR_READ(sc, WMREG_EECD); 1346 if (reg & EECD_EE_SIZE) 1347 sc->sc_ee_addrbits = 8; 1348 else 1349 sc->sc_ee_addrbits = 6; 1350 } else if (sc->sc_type <= WM_T_82547_2) { 1351 reg = CSR_READ(sc, WMREG_EECD); 1352 if (reg & EECD_EE_TYPE) { 1353 sc->sc_flags |= WM_F_EEPROM_SPI; 1354 sc->sc_ee_addrbits = (reg & EECD_EE_ABITS) ? 16 : 8; 1355 } else 1356 sc->sc_ee_addrbits = (reg & EECD_EE_ABITS) ? 8 : 6; 1357 } else if ((sc->sc_type == WM_T_82573 || sc->sc_type == WM_T_82574) && 1358 (wm_is_onboard_nvm_eeprom(sc) == 0)) { 1359 sc->sc_flags |= WM_F_EEPROM_FLASH; 1360 } else { 1361 /* Assume everything else is SPI. */ 1362 reg = CSR_READ(sc, WMREG_EECD); 1363 sc->sc_flags |= WM_F_EEPROM_SPI; 1364 sc->sc_ee_addrbits = (reg & EECD_EE_ABITS) ? 16 : 8; 1365 } 1366 1367 /* 1368 * Defer printing the EEPROM type until after verifying the checksum 1369 * This allows the EEPROM type to be printed correctly in the case 1370 * that no EEPROM is attached. 1371 */ 1372 1373 /* 1374 * Validate the EEPROM checksum. If the checksum fails, flag this for 1375 * later, so we can fail future reads from the EEPROM. 1376 */ 1377 if (wm_validate_eeprom_checksum(sc)) { 1378 /* 1379 * Read twice again because some PCI-e parts fail the first 1380 * check due to the link being in sleep state. 1381 */ 1382 if (wm_validate_eeprom_checksum(sc)) 1383 sc->sc_flags |= WM_F_EEPROM_INVALID; 1384 } 1385 1386 if (sc->sc_flags & WM_F_EEPROM_INVALID) 1387 aprint_verbose_dev(sc->sc_dev, "No EEPROM\n"); 1388 else if (sc->sc_flags & WM_F_EEPROM_FLASH) { 1389 aprint_verbose_dev(sc->sc_dev, "FLASH\n"); 1390 } else { 1391 if (sc->sc_flags & WM_F_EEPROM_SPI) 1392 eetype = "SPI"; 1393 else 1394 eetype = "MicroWire"; 1395 aprint_verbose_dev(sc->sc_dev, 1396 "%u word (%d address bits) %s EEPROM\n", 1397 1U << sc->sc_ee_addrbits, 1398 sc->sc_ee_addrbits, eetype); 1399 } 1400 1401 /* 1402 * Read the Ethernet address from the EEPROM, if not first found 1403 * in device properties. 1404 */ 1405 ea = prop_dictionary_get(device_properties(sc->sc_dev), "mac-addr"); 1406 if (ea != NULL) { 1407 KASSERT(prop_object_type(ea) == PROP_TYPE_DATA); 1408 KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN); 1409 memcpy(enaddr, prop_data_data_nocopy(ea), ETHER_ADDR_LEN); 1410 } else { 1411 if (wm_read_eeprom(sc, EEPROM_OFF_MACADDR, 1412 sizeof(myea) / sizeof(myea[0]), myea)) { 1413 aprint_error_dev(sc->sc_dev, 1414 "unable to read Ethernet address\n"); 1415 return; 1416 } 1417 enaddr[0] = myea[0] & 0xff; 1418 enaddr[1] = myea[0] >> 8; 1419 enaddr[2] = myea[1] & 0xff; 1420 enaddr[3] = myea[1] >> 8; 1421 enaddr[4] = myea[2] & 0xff; 1422 enaddr[5] = myea[2] >> 8; 1423 } 1424 1425 /* 1426 * Toggle the LSB of the MAC address on the second port 1427 * of the dual port controller. 1428 */ 1429 if (sc->sc_type == WM_T_82546 || sc->sc_type == WM_T_82546_3 1430 || sc->sc_type == WM_T_82571 || sc->sc_type == WM_T_80003) { 1431 if ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1) 1432 enaddr[5] ^= 1; 1433 } 1434 1435 aprint_normal_dev(sc->sc_dev, "Ethernet address %s\n", 1436 ether_sprintf(enaddr)); 1437 1438 /* 1439 * Read the config info from the EEPROM, and set up various 1440 * bits in the control registers based on their contents. 1441 */ 1442 pn = prop_dictionary_get(device_properties(sc->sc_dev), 1443 "i82543-cfg1"); 1444 if (pn != NULL) { 1445 KASSERT(prop_object_type(pn) == PROP_TYPE_NUMBER); 1446 cfg1 = (uint16_t) prop_number_integer_value(pn); 1447 } else { 1448 if (wm_read_eeprom(sc, EEPROM_OFF_CFG1, 1, &cfg1)) { 1449 aprint_error_dev(sc->sc_dev, "unable to read CFG1\n"); 1450 return; 1451 } 1452 } 1453 1454 pn = prop_dictionary_get(device_properties(sc->sc_dev), 1455 "i82543-cfg2"); 1456 if (pn != NULL) { 1457 KASSERT(prop_object_type(pn) == PROP_TYPE_NUMBER); 1458 cfg2 = (uint16_t) prop_number_integer_value(pn); 1459 } else { 1460 if (wm_read_eeprom(sc, EEPROM_OFF_CFG2, 1, &cfg2)) { 1461 aprint_error_dev(sc->sc_dev, "unable to read CFG2\n"); 1462 return; 1463 } 1464 } 1465 1466 if (sc->sc_type >= WM_T_82544) { 1467 pn = prop_dictionary_get(device_properties(sc->sc_dev), 1468 "i82543-swdpin"); 1469 if (pn != NULL) { 1470 KASSERT(prop_object_type(pn) == PROP_TYPE_NUMBER); 1471 swdpin = (uint16_t) prop_number_integer_value(pn); 1472 } else { 1473 if (wm_read_eeprom(sc, EEPROM_OFF_SWDPIN, 1, &swdpin)) { 1474 aprint_error_dev(sc->sc_dev, 1475 "unable to read SWDPIN\n"); 1476 return; 1477 } 1478 } 1479 } 1480 1481 if (cfg1 & EEPROM_CFG1_ILOS) 1482 sc->sc_ctrl |= CTRL_ILOS; 1483 if (sc->sc_type >= WM_T_82544) { 1484 sc->sc_ctrl |= 1485 ((swdpin >> EEPROM_SWDPIN_SWDPIO_SHIFT) & 0xf) << 1486 CTRL_SWDPIO_SHIFT; 1487 sc->sc_ctrl |= 1488 ((swdpin >> EEPROM_SWDPIN_SWDPIN_SHIFT) & 0xf) << 1489 CTRL_SWDPINS_SHIFT; 1490 } else { 1491 sc->sc_ctrl |= 1492 ((cfg1 >> EEPROM_CFG1_SWDPIO_SHIFT) & 0xf) << 1493 CTRL_SWDPIO_SHIFT; 1494 } 1495 1496 #if 0 1497 if (sc->sc_type >= WM_T_82544) { 1498 if (cfg1 & EEPROM_CFG1_IPS0) 1499 sc->sc_ctrl_ext |= CTRL_EXT_IPS; 1500 if (cfg1 & EEPROM_CFG1_IPS1) 1501 sc->sc_ctrl_ext |= CTRL_EXT_IPS1; 1502 sc->sc_ctrl_ext |= 1503 ((swdpin >> (EEPROM_SWDPIN_SWDPIO_SHIFT + 4)) & 0xd) << 1504 CTRL_EXT_SWDPIO_SHIFT; 1505 sc->sc_ctrl_ext |= 1506 ((swdpin >> (EEPROM_SWDPIN_SWDPIN_SHIFT + 4)) & 0xd) << 1507 CTRL_EXT_SWDPINS_SHIFT; 1508 } else { 1509 sc->sc_ctrl_ext |= 1510 ((cfg2 >> EEPROM_CFG2_SWDPIO_SHIFT) & 0xf) << 1511 CTRL_EXT_SWDPIO_SHIFT; 1512 } 1513 #endif 1514 1515 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 1516 #if 0 1517 CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext); 1518 #endif 1519 1520 /* 1521 * Set up some register offsets that are different between 1522 * the i82542 and the i82543 and later chips. 1523 */ 1524 if (sc->sc_type < WM_T_82543) { 1525 sc->sc_rdt_reg = WMREG_OLD_RDT0; 1526 sc->sc_tdt_reg = WMREG_OLD_TDT; 1527 } else { 1528 sc->sc_rdt_reg = WMREG_RDT; 1529 sc->sc_tdt_reg = WMREG_TDT; 1530 } 1531 1532 /* 1533 * Determine if we're TBI or GMII mode, and initialize the 1534 * media structures accordingly. 1535 */ 1536 if (sc->sc_type == WM_T_ICH8 || sc->sc_type == WM_T_ICH9 1537 || sc->sc_type == WM_T_ICH10 || sc->sc_type == WM_T_82573 1538 || sc->sc_type == WM_T_82574) { 1539 /* STATUS_TBIMODE reserved/reused, can't rely on it */ 1540 wm_gmii_mediainit(sc); 1541 } else if (sc->sc_type < WM_T_82543 || 1542 (CSR_READ(sc, WMREG_STATUS) & STATUS_TBIMODE) != 0) { 1543 if (wmp->wmp_flags & WMP_F_1000T) 1544 aprint_error_dev(sc->sc_dev, 1545 "WARNING: TBIMODE set on 1000BASE-T product!\n"); 1546 wm_tbi_mediainit(sc); 1547 } else { 1548 if (wmp->wmp_flags & WMP_F_1000X) 1549 aprint_error_dev(sc->sc_dev, 1550 "WARNING: TBIMODE clear on 1000BASE-X product!\n"); 1551 wm_gmii_mediainit(sc); 1552 } 1553 1554 ifp = &sc->sc_ethercom.ec_if; 1555 xname = device_xname(sc->sc_dev); 1556 strlcpy(ifp->if_xname, xname, IFNAMSIZ); 1557 ifp->if_softc = sc; 1558 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1559 ifp->if_ioctl = wm_ioctl; 1560 ifp->if_start = wm_start; 1561 ifp->if_watchdog = wm_watchdog; 1562 ifp->if_init = wm_init; 1563 ifp->if_stop = wm_stop; 1564 IFQ_SET_MAXLEN(&ifp->if_snd, max(WM_IFQUEUELEN, IFQ_MAXLEN)); 1565 IFQ_SET_READY(&ifp->if_snd); 1566 1567 if (sc->sc_type != WM_T_82573 && sc->sc_type != WM_T_82574 && 1568 sc->sc_type != WM_T_ICH8) 1569 sc->sc_ethercom.ec_capabilities |= ETHERCAP_JUMBO_MTU; 1570 1571 /* 1572 * If we're a i82543 or greater, we can support VLANs. 1573 */ 1574 if (sc->sc_type >= WM_T_82543) 1575 sc->sc_ethercom.ec_capabilities |= 1576 ETHERCAP_VLAN_MTU | ETHERCAP_VLAN_HWTAGGING; 1577 1578 /* 1579 * We can perform TCPv4 and UDPv4 checkums in-bound. Only 1580 * on i82543 and later. 1581 */ 1582 if (sc->sc_type >= WM_T_82543) { 1583 ifp->if_capabilities |= 1584 IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | 1585 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 1586 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx | 1587 IFCAP_CSUM_TCPv6_Tx | 1588 IFCAP_CSUM_UDPv6_Tx; 1589 } 1590 1591 /* 1592 * XXXyamt: i'm not sure which chips support RXCSUM_IPV6OFL. 1593 * 1594 * 82541GI (8086:1076) ... no 1595 * 82572EI (8086:10b9) ... yes 1596 */ 1597 if (sc->sc_type >= WM_T_82571) { 1598 ifp->if_capabilities |= 1599 IFCAP_CSUM_TCPv6_Rx | IFCAP_CSUM_UDPv6_Rx; 1600 } 1601 1602 /* 1603 * If we're a i82544 or greater (except i82547), we can do 1604 * TCP segmentation offload. 1605 */ 1606 if (sc->sc_type >= WM_T_82544 && sc->sc_type != WM_T_82547) { 1607 ifp->if_capabilities |= IFCAP_TSOv4; 1608 } 1609 1610 if (sc->sc_type >= WM_T_82571) { 1611 ifp->if_capabilities |= IFCAP_TSOv6; 1612 } 1613 1614 /* 1615 * Attach the interface. 1616 */ 1617 if_attach(ifp); 1618 ether_ifattach(ifp, enaddr); 1619 #if NRND > 0 1620 rnd_attach_source(&sc->rnd_source, xname, RND_TYPE_NET, 0); 1621 #endif 1622 1623 #ifdef WM_EVENT_COUNTERS 1624 /* Attach event counters. */ 1625 evcnt_attach_dynamic(&sc->sc_ev_txsstall, EVCNT_TYPE_MISC, 1626 NULL, xname, "txsstall"); 1627 evcnt_attach_dynamic(&sc->sc_ev_txdstall, EVCNT_TYPE_MISC, 1628 NULL, xname, "txdstall"); 1629 evcnt_attach_dynamic(&sc->sc_ev_txfifo_stall, EVCNT_TYPE_MISC, 1630 NULL, xname, "txfifo_stall"); 1631 evcnt_attach_dynamic(&sc->sc_ev_txdw, EVCNT_TYPE_INTR, 1632 NULL, xname, "txdw"); 1633 evcnt_attach_dynamic(&sc->sc_ev_txqe, EVCNT_TYPE_INTR, 1634 NULL, xname, "txqe"); 1635 evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, 1636 NULL, xname, "rxintr"); 1637 evcnt_attach_dynamic(&sc->sc_ev_linkintr, EVCNT_TYPE_INTR, 1638 NULL, xname, "linkintr"); 1639 1640 evcnt_attach_dynamic(&sc->sc_ev_rxipsum, EVCNT_TYPE_MISC, 1641 NULL, xname, "rxipsum"); 1642 evcnt_attach_dynamic(&sc->sc_ev_rxtusum, EVCNT_TYPE_MISC, 1643 NULL, xname, "rxtusum"); 1644 evcnt_attach_dynamic(&sc->sc_ev_txipsum, EVCNT_TYPE_MISC, 1645 NULL, xname, "txipsum"); 1646 evcnt_attach_dynamic(&sc->sc_ev_txtusum, EVCNT_TYPE_MISC, 1647 NULL, xname, "txtusum"); 1648 evcnt_attach_dynamic(&sc->sc_ev_txtusum6, EVCNT_TYPE_MISC, 1649 NULL, xname, "txtusum6"); 1650 1651 evcnt_attach_dynamic(&sc->sc_ev_txtso, EVCNT_TYPE_MISC, 1652 NULL, xname, "txtso"); 1653 evcnt_attach_dynamic(&sc->sc_ev_txtso6, EVCNT_TYPE_MISC, 1654 NULL, xname, "txtso6"); 1655 evcnt_attach_dynamic(&sc->sc_ev_txtsopain, EVCNT_TYPE_MISC, 1656 NULL, xname, "txtsopain"); 1657 1658 for (i = 0; i < WM_NTXSEGS; i++) { 1659 sprintf(wm_txseg_evcnt_names[i], "txseg%d", i); 1660 evcnt_attach_dynamic(&sc->sc_ev_txseg[i], EVCNT_TYPE_MISC, 1661 NULL, xname, wm_txseg_evcnt_names[i]); 1662 } 1663 1664 evcnt_attach_dynamic(&sc->sc_ev_txdrop, EVCNT_TYPE_MISC, 1665 NULL, xname, "txdrop"); 1666 1667 evcnt_attach_dynamic(&sc->sc_ev_tu, EVCNT_TYPE_MISC, 1668 NULL, xname, "tu"); 1669 1670 evcnt_attach_dynamic(&sc->sc_ev_tx_xoff, EVCNT_TYPE_MISC, 1671 NULL, xname, "tx_xoff"); 1672 evcnt_attach_dynamic(&sc->sc_ev_tx_xon, EVCNT_TYPE_MISC, 1673 NULL, xname, "tx_xon"); 1674 evcnt_attach_dynamic(&sc->sc_ev_rx_xoff, EVCNT_TYPE_MISC, 1675 NULL, xname, "rx_xoff"); 1676 evcnt_attach_dynamic(&sc->sc_ev_rx_xon, EVCNT_TYPE_MISC, 1677 NULL, xname, "rx_xon"); 1678 evcnt_attach_dynamic(&sc->sc_ev_rx_macctl, EVCNT_TYPE_MISC, 1679 NULL, xname, "rx_macctl"); 1680 #endif /* WM_EVENT_COUNTERS */ 1681 1682 if (pmf_device_register(self, NULL, NULL)) 1683 pmf_class_network_register(self, ifp); 1684 else 1685 aprint_error_dev(self, "couldn't establish power handler\n"); 1686 1687 return; 1688 1689 /* 1690 * Free any resources we've allocated during the failed attach 1691 * attempt. Do this in reverse order and fall through. 1692 */ 1693 fail_5: 1694 for (i = 0; i < WM_NRXDESC; i++) { 1695 if (sc->sc_rxsoft[i].rxs_dmamap != NULL) 1696 bus_dmamap_destroy(sc->sc_dmat, 1697 sc->sc_rxsoft[i].rxs_dmamap); 1698 } 1699 fail_4: 1700 for (i = 0; i < WM_TXQUEUELEN(sc); i++) { 1701 if (sc->sc_txsoft[i].txs_dmamap != NULL) 1702 bus_dmamap_destroy(sc->sc_dmat, 1703 sc->sc_txsoft[i].txs_dmamap); 1704 } 1705 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 1706 fail_3: 1707 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 1708 fail_2: 1709 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 1710 cdata_size); 1711 fail_1: 1712 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 1713 fail_0: 1714 return; 1715 } 1716 1717 /* 1718 * wm_tx_offload: 1719 * 1720 * Set up TCP/IP checksumming parameters for the 1721 * specified packet. 1722 */ 1723 static int 1724 wm_tx_offload(struct wm_softc *sc, struct wm_txsoft *txs, uint32_t *cmdp, 1725 uint8_t *fieldsp) 1726 { 1727 struct mbuf *m0 = txs->txs_mbuf; 1728 struct livengood_tcpip_ctxdesc *t; 1729 uint32_t ipcs, tucs, cmd, cmdlen, seg; 1730 uint32_t ipcse; 1731 struct ether_header *eh; 1732 int offset, iphl; 1733 uint8_t fields; 1734 1735 /* 1736 * XXX It would be nice if the mbuf pkthdr had offset 1737 * fields for the protocol headers. 1738 */ 1739 1740 eh = mtod(m0, struct ether_header *); 1741 switch (htons(eh->ether_type)) { 1742 case ETHERTYPE_IP: 1743 case ETHERTYPE_IPV6: 1744 offset = ETHER_HDR_LEN; 1745 break; 1746 1747 case ETHERTYPE_VLAN: 1748 offset = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN; 1749 break; 1750 1751 default: 1752 /* 1753 * Don't support this protocol or encapsulation. 1754 */ 1755 *fieldsp = 0; 1756 *cmdp = 0; 1757 return (0); 1758 } 1759 1760 if ((m0->m_pkthdr.csum_flags & 1761 (M_CSUM_TSOv4|M_CSUM_UDPv4|M_CSUM_TCPv4)) != 0) { 1762 iphl = M_CSUM_DATA_IPv4_IPHL(m0->m_pkthdr.csum_data); 1763 } else { 1764 iphl = M_CSUM_DATA_IPv6_HL(m0->m_pkthdr.csum_data); 1765 } 1766 ipcse = offset + iphl - 1; 1767 1768 cmd = WTX_CMD_DEXT | WTX_DTYP_D; 1769 cmdlen = WTX_CMD_DEXT | WTX_DTYP_C | WTX_CMD_IDE; 1770 seg = 0; 1771 fields = 0; 1772 1773 if ((m0->m_pkthdr.csum_flags & (M_CSUM_TSOv4 | M_CSUM_TSOv6)) != 0) { 1774 int hlen = offset + iphl; 1775 bool v4 = (m0->m_pkthdr.csum_flags & M_CSUM_TSOv4) != 0; 1776 1777 if (__predict_false(m0->m_len < 1778 (hlen + sizeof(struct tcphdr)))) { 1779 /* 1780 * TCP/IP headers are not in the first mbuf; we need 1781 * to do this the slow and painful way. Let's just 1782 * hope this doesn't happen very often. 1783 */ 1784 struct tcphdr th; 1785 1786 WM_EVCNT_INCR(&sc->sc_ev_txtsopain); 1787 1788 m_copydata(m0, hlen, sizeof(th), &th); 1789 if (v4) { 1790 struct ip ip; 1791 1792 m_copydata(m0, offset, sizeof(ip), &ip); 1793 ip.ip_len = 0; 1794 m_copyback(m0, 1795 offset + offsetof(struct ip, ip_len), 1796 sizeof(ip.ip_len), &ip.ip_len); 1797 th.th_sum = in_cksum_phdr(ip.ip_src.s_addr, 1798 ip.ip_dst.s_addr, htons(IPPROTO_TCP)); 1799 } else { 1800 struct ip6_hdr ip6; 1801 1802 m_copydata(m0, offset, sizeof(ip6), &ip6); 1803 ip6.ip6_plen = 0; 1804 m_copyback(m0, 1805 offset + offsetof(struct ip6_hdr, ip6_plen), 1806 sizeof(ip6.ip6_plen), &ip6.ip6_plen); 1807 th.th_sum = in6_cksum_phdr(&ip6.ip6_src, 1808 &ip6.ip6_dst, 0, htonl(IPPROTO_TCP)); 1809 } 1810 m_copyback(m0, hlen + offsetof(struct tcphdr, th_sum), 1811 sizeof(th.th_sum), &th.th_sum); 1812 1813 hlen += th.th_off << 2; 1814 } else { 1815 /* 1816 * TCP/IP headers are in the first mbuf; we can do 1817 * this the easy way. 1818 */ 1819 struct tcphdr *th; 1820 1821 if (v4) { 1822 struct ip *ip = 1823 (void *)(mtod(m0, char *) + offset); 1824 th = (void *)(mtod(m0, char *) + hlen); 1825 1826 ip->ip_len = 0; 1827 th->th_sum = in_cksum_phdr(ip->ip_src.s_addr, 1828 ip->ip_dst.s_addr, htons(IPPROTO_TCP)); 1829 } else { 1830 struct ip6_hdr *ip6 = 1831 (void *)(mtod(m0, char *) + offset); 1832 th = (void *)(mtod(m0, char *) + hlen); 1833 1834 ip6->ip6_plen = 0; 1835 th->th_sum = in6_cksum_phdr(&ip6->ip6_src, 1836 &ip6->ip6_dst, 0, htonl(IPPROTO_TCP)); 1837 } 1838 hlen += th->th_off << 2; 1839 } 1840 1841 if (v4) { 1842 WM_EVCNT_INCR(&sc->sc_ev_txtso); 1843 cmdlen |= WTX_TCPIP_CMD_IP; 1844 } else { 1845 WM_EVCNT_INCR(&sc->sc_ev_txtso6); 1846 ipcse = 0; 1847 } 1848 cmd |= WTX_TCPIP_CMD_TSE; 1849 cmdlen |= WTX_TCPIP_CMD_TSE | 1850 WTX_TCPIP_CMD_TCP | (m0->m_pkthdr.len - hlen); 1851 seg = WTX_TCPIP_SEG_HDRLEN(hlen) | 1852 WTX_TCPIP_SEG_MSS(m0->m_pkthdr.segsz); 1853 } 1854 1855 /* 1856 * NOTE: Even if we're not using the IP or TCP/UDP checksum 1857 * offload feature, if we load the context descriptor, we 1858 * MUST provide valid values for IPCSS and TUCSS fields. 1859 */ 1860 1861 ipcs = WTX_TCPIP_IPCSS(offset) | 1862 WTX_TCPIP_IPCSO(offset + offsetof(struct ip, ip_sum)) | 1863 WTX_TCPIP_IPCSE(ipcse); 1864 if (m0->m_pkthdr.csum_flags & (M_CSUM_IPv4|M_CSUM_TSOv4)) { 1865 WM_EVCNT_INCR(&sc->sc_ev_txipsum); 1866 fields |= WTX_IXSM; 1867 } 1868 1869 offset += iphl; 1870 1871 if (m0->m_pkthdr.csum_flags & 1872 (M_CSUM_TCPv4|M_CSUM_UDPv4|M_CSUM_TSOv4)) { 1873 WM_EVCNT_INCR(&sc->sc_ev_txtusum); 1874 fields |= WTX_TXSM; 1875 tucs = WTX_TCPIP_TUCSS(offset) | 1876 WTX_TCPIP_TUCSO(offset + 1877 M_CSUM_DATA_IPv4_OFFSET(m0->m_pkthdr.csum_data)) | 1878 WTX_TCPIP_TUCSE(0) /* rest of packet */; 1879 } else if ((m0->m_pkthdr.csum_flags & 1880 (M_CSUM_TCPv6|M_CSUM_UDPv6|M_CSUM_TSOv6)) != 0) { 1881 WM_EVCNT_INCR(&sc->sc_ev_txtusum6); 1882 fields |= WTX_TXSM; 1883 tucs = WTX_TCPIP_TUCSS(offset) | 1884 WTX_TCPIP_TUCSO(offset + 1885 M_CSUM_DATA_IPv6_OFFSET(m0->m_pkthdr.csum_data)) | 1886 WTX_TCPIP_TUCSE(0) /* rest of packet */; 1887 } else { 1888 /* Just initialize it to a valid TCP context. */ 1889 tucs = WTX_TCPIP_TUCSS(offset) | 1890 WTX_TCPIP_TUCSO(offset + offsetof(struct tcphdr, th_sum)) | 1891 WTX_TCPIP_TUCSE(0) /* rest of packet */; 1892 } 1893 1894 /* Fill in the context descriptor. */ 1895 t = (struct livengood_tcpip_ctxdesc *) 1896 &sc->sc_txdescs[sc->sc_txnext]; 1897 t->tcpip_ipcs = htole32(ipcs); 1898 t->tcpip_tucs = htole32(tucs); 1899 t->tcpip_cmdlen = htole32(cmdlen); 1900 t->tcpip_seg = htole32(seg); 1901 WM_CDTXSYNC(sc, sc->sc_txnext, 1, BUS_DMASYNC_PREWRITE); 1902 1903 sc->sc_txnext = WM_NEXTTX(sc, sc->sc_txnext); 1904 txs->txs_ndesc++; 1905 1906 *cmdp = cmd; 1907 *fieldsp = fields; 1908 1909 return (0); 1910 } 1911 1912 static void 1913 wm_dump_mbuf_chain(struct wm_softc *sc, struct mbuf *m0) 1914 { 1915 struct mbuf *m; 1916 int i; 1917 1918 log(LOG_DEBUG, "%s: mbuf chain:\n", device_xname(sc->sc_dev)); 1919 for (m = m0, i = 0; m != NULL; m = m->m_next, i++) 1920 log(LOG_DEBUG, "%s:\tm_data = %p, m_len = %d, " 1921 "m_flags = 0x%08x\n", device_xname(sc->sc_dev), 1922 m->m_data, m->m_len, m->m_flags); 1923 log(LOG_DEBUG, "%s:\t%d mbuf%s in chain\n", device_xname(sc->sc_dev), 1924 i, i == 1 ? "" : "s"); 1925 } 1926 1927 /* 1928 * wm_82547_txfifo_stall: 1929 * 1930 * Callout used to wait for the 82547 Tx FIFO to drain, 1931 * reset the FIFO pointers, and restart packet transmission. 1932 */ 1933 static void 1934 wm_82547_txfifo_stall(void *arg) 1935 { 1936 struct wm_softc *sc = arg; 1937 int s; 1938 1939 s = splnet(); 1940 1941 if (sc->sc_txfifo_stall) { 1942 if (CSR_READ(sc, WMREG_TDT) == CSR_READ(sc, WMREG_TDH) && 1943 CSR_READ(sc, WMREG_TDFT) == CSR_READ(sc, WMREG_TDFH) && 1944 CSR_READ(sc, WMREG_TDFTS) == CSR_READ(sc, WMREG_TDFHS)) { 1945 /* 1946 * Packets have drained. Stop transmitter, reset 1947 * FIFO pointers, restart transmitter, and kick 1948 * the packet queue. 1949 */ 1950 uint32_t tctl = CSR_READ(sc, WMREG_TCTL); 1951 CSR_WRITE(sc, WMREG_TCTL, tctl & ~TCTL_EN); 1952 CSR_WRITE(sc, WMREG_TDFT, sc->sc_txfifo_addr); 1953 CSR_WRITE(sc, WMREG_TDFH, sc->sc_txfifo_addr); 1954 CSR_WRITE(sc, WMREG_TDFTS, sc->sc_txfifo_addr); 1955 CSR_WRITE(sc, WMREG_TDFHS, sc->sc_txfifo_addr); 1956 CSR_WRITE(sc, WMREG_TCTL, tctl); 1957 CSR_WRITE_FLUSH(sc); 1958 1959 sc->sc_txfifo_head = 0; 1960 sc->sc_txfifo_stall = 0; 1961 wm_start(&sc->sc_ethercom.ec_if); 1962 } else { 1963 /* 1964 * Still waiting for packets to drain; try again in 1965 * another tick. 1966 */ 1967 callout_schedule(&sc->sc_txfifo_ch, 1); 1968 } 1969 } 1970 1971 splx(s); 1972 } 1973 1974 /* 1975 * wm_82547_txfifo_bugchk: 1976 * 1977 * Check for bug condition in the 82547 Tx FIFO. We need to 1978 * prevent enqueueing a packet that would wrap around the end 1979 * if the Tx FIFO ring buffer, otherwise the chip will croak. 1980 * 1981 * We do this by checking the amount of space before the end 1982 * of the Tx FIFO buffer. If the packet will not fit, we "stall" 1983 * the Tx FIFO, wait for all remaining packets to drain, reset 1984 * the internal FIFO pointers to the beginning, and restart 1985 * transmission on the interface. 1986 */ 1987 #define WM_FIFO_HDR 0x10 1988 #define WM_82547_PAD_LEN 0x3e0 1989 static int 1990 wm_82547_txfifo_bugchk(struct wm_softc *sc, struct mbuf *m0) 1991 { 1992 int space = sc->sc_txfifo_size - sc->sc_txfifo_head; 1993 int len = roundup(m0->m_pkthdr.len + WM_FIFO_HDR, WM_FIFO_HDR); 1994 1995 /* Just return if already stalled. */ 1996 if (sc->sc_txfifo_stall) 1997 return (1); 1998 1999 if (sc->sc_mii.mii_media_active & IFM_FDX) { 2000 /* Stall only occurs in half-duplex mode. */ 2001 goto send_packet; 2002 } 2003 2004 if (len >= WM_82547_PAD_LEN + space) { 2005 sc->sc_txfifo_stall = 1; 2006 callout_schedule(&sc->sc_txfifo_ch, 1); 2007 return (1); 2008 } 2009 2010 send_packet: 2011 sc->sc_txfifo_head += len; 2012 if (sc->sc_txfifo_head >= sc->sc_txfifo_size) 2013 sc->sc_txfifo_head -= sc->sc_txfifo_size; 2014 2015 return (0); 2016 } 2017 2018 /* 2019 * wm_start: [ifnet interface function] 2020 * 2021 * Start packet transmission on the interface. 2022 */ 2023 static void 2024 wm_start(struct ifnet *ifp) 2025 { 2026 struct wm_softc *sc = ifp->if_softc; 2027 struct mbuf *m0; 2028 struct m_tag *mtag; 2029 struct wm_txsoft *txs; 2030 bus_dmamap_t dmamap; 2031 int error, nexttx, lasttx = -1, ofree, seg, segs_needed, use_tso; 2032 bus_addr_t curaddr; 2033 bus_size_t seglen, curlen; 2034 uint32_t cksumcmd; 2035 uint8_t cksumfields; 2036 2037 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) 2038 return; 2039 2040 /* 2041 * Remember the previous number of free descriptors. 2042 */ 2043 ofree = sc->sc_txfree; 2044 2045 /* 2046 * Loop through the send queue, setting up transmit descriptors 2047 * until we drain the queue, or use up all available transmit 2048 * descriptors. 2049 */ 2050 for (;;) { 2051 /* Grab a packet off the queue. */ 2052 IFQ_POLL(&ifp->if_snd, m0); 2053 if (m0 == NULL) 2054 break; 2055 2056 DPRINTF(WM_DEBUG_TX, 2057 ("%s: TX: have packet to transmit: %p\n", 2058 device_xname(sc->sc_dev), m0)); 2059 2060 /* Get a work queue entry. */ 2061 if (sc->sc_txsfree < WM_TXQUEUE_GC(sc)) { 2062 wm_txintr(sc); 2063 if (sc->sc_txsfree == 0) { 2064 DPRINTF(WM_DEBUG_TX, 2065 ("%s: TX: no free job descriptors\n", 2066 device_xname(sc->sc_dev))); 2067 WM_EVCNT_INCR(&sc->sc_ev_txsstall); 2068 break; 2069 } 2070 } 2071 2072 txs = &sc->sc_txsoft[sc->sc_txsnext]; 2073 dmamap = txs->txs_dmamap; 2074 2075 use_tso = (m0->m_pkthdr.csum_flags & 2076 (M_CSUM_TSOv4 | M_CSUM_TSOv6)) != 0; 2077 2078 /* 2079 * So says the Linux driver: 2080 * The controller does a simple calculation to make sure 2081 * there is enough room in the FIFO before initiating the 2082 * DMA for each buffer. The calc is: 2083 * 4 = ceil(buffer len / MSS) 2084 * To make sure we don't overrun the FIFO, adjust the max 2085 * buffer len if the MSS drops. 2086 */ 2087 dmamap->dm_maxsegsz = 2088 (use_tso && (m0->m_pkthdr.segsz << 2) < WTX_MAX_LEN) 2089 ? m0->m_pkthdr.segsz << 2 2090 : WTX_MAX_LEN; 2091 2092 /* 2093 * Load the DMA map. If this fails, the packet either 2094 * didn't fit in the allotted number of segments, or we 2095 * were short on resources. For the too-many-segments 2096 * case, we simply report an error and drop the packet, 2097 * since we can't sanely copy a jumbo packet to a single 2098 * buffer. 2099 */ 2100 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 2101 BUS_DMA_WRITE|BUS_DMA_NOWAIT); 2102 if (error) { 2103 if (error == EFBIG) { 2104 WM_EVCNT_INCR(&sc->sc_ev_txdrop); 2105 log(LOG_ERR, "%s: Tx packet consumes too many " 2106 "DMA segments, dropping...\n", 2107 device_xname(sc->sc_dev)); 2108 IFQ_DEQUEUE(&ifp->if_snd, m0); 2109 wm_dump_mbuf_chain(sc, m0); 2110 m_freem(m0); 2111 continue; 2112 } 2113 /* 2114 * Short on resources, just stop for now. 2115 */ 2116 DPRINTF(WM_DEBUG_TX, 2117 ("%s: TX: dmamap load failed: %d\n", 2118 device_xname(sc->sc_dev), error)); 2119 break; 2120 } 2121 2122 segs_needed = dmamap->dm_nsegs; 2123 if (use_tso) { 2124 /* For sentinel descriptor; see below. */ 2125 segs_needed++; 2126 } 2127 2128 /* 2129 * Ensure we have enough descriptors free to describe 2130 * the packet. Note, we always reserve one descriptor 2131 * at the end of the ring due to the semantics of the 2132 * TDT register, plus one more in the event we need 2133 * to load offload context. 2134 */ 2135 if (segs_needed > sc->sc_txfree - 2) { 2136 /* 2137 * Not enough free descriptors to transmit this 2138 * packet. We haven't committed anything yet, 2139 * so just unload the DMA map, put the packet 2140 * pack on the queue, and punt. Notify the upper 2141 * layer that there are no more slots left. 2142 */ 2143 DPRINTF(WM_DEBUG_TX, 2144 ("%s: TX: need %d (%d) descriptors, have %d\n", 2145 device_xname(sc->sc_dev), dmamap->dm_nsegs, 2146 segs_needed, sc->sc_txfree - 1)); 2147 ifp->if_flags |= IFF_OACTIVE; 2148 bus_dmamap_unload(sc->sc_dmat, dmamap); 2149 WM_EVCNT_INCR(&sc->sc_ev_txdstall); 2150 break; 2151 } 2152 2153 /* 2154 * Check for 82547 Tx FIFO bug. We need to do this 2155 * once we know we can transmit the packet, since we 2156 * do some internal FIFO space accounting here. 2157 */ 2158 if (sc->sc_type == WM_T_82547 && 2159 wm_82547_txfifo_bugchk(sc, m0)) { 2160 DPRINTF(WM_DEBUG_TX, 2161 ("%s: TX: 82547 Tx FIFO bug detected\n", 2162 device_xname(sc->sc_dev))); 2163 ifp->if_flags |= IFF_OACTIVE; 2164 bus_dmamap_unload(sc->sc_dmat, dmamap); 2165 WM_EVCNT_INCR(&sc->sc_ev_txfifo_stall); 2166 break; 2167 } 2168 2169 IFQ_DEQUEUE(&ifp->if_snd, m0); 2170 2171 /* 2172 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. 2173 */ 2174 2175 DPRINTF(WM_DEBUG_TX, 2176 ("%s: TX: packet has %d (%d) DMA segments\n", 2177 device_xname(sc->sc_dev), dmamap->dm_nsegs, segs_needed)); 2178 2179 WM_EVCNT_INCR(&sc->sc_ev_txseg[dmamap->dm_nsegs - 1]); 2180 2181 /* 2182 * Store a pointer to the packet so that we can free it 2183 * later. 2184 * 2185 * Initially, we consider the number of descriptors the 2186 * packet uses the number of DMA segments. This may be 2187 * incremented by 1 if we do checksum offload (a descriptor 2188 * is used to set the checksum context). 2189 */ 2190 txs->txs_mbuf = m0; 2191 txs->txs_firstdesc = sc->sc_txnext; 2192 txs->txs_ndesc = segs_needed; 2193 2194 /* Set up offload parameters for this packet. */ 2195 if (m0->m_pkthdr.csum_flags & 2196 (M_CSUM_TSOv4|M_CSUM_TSOv6| 2197 M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4| 2198 M_CSUM_TCPv6|M_CSUM_UDPv6)) { 2199 if (wm_tx_offload(sc, txs, &cksumcmd, 2200 &cksumfields) != 0) { 2201 /* Error message already displayed. */ 2202 bus_dmamap_unload(sc->sc_dmat, dmamap); 2203 continue; 2204 } 2205 } else { 2206 cksumcmd = 0; 2207 cksumfields = 0; 2208 } 2209 2210 cksumcmd |= WTX_CMD_IDE | WTX_CMD_IFCS; 2211 2212 /* Sync the DMA map. */ 2213 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 2214 BUS_DMASYNC_PREWRITE); 2215 2216 /* 2217 * Initialize the transmit descriptor. 2218 */ 2219 for (nexttx = sc->sc_txnext, seg = 0; 2220 seg < dmamap->dm_nsegs; seg++) { 2221 for (seglen = dmamap->dm_segs[seg].ds_len, 2222 curaddr = dmamap->dm_segs[seg].ds_addr; 2223 seglen != 0; 2224 curaddr += curlen, seglen -= curlen, 2225 nexttx = WM_NEXTTX(sc, nexttx)) { 2226 curlen = seglen; 2227 2228 /* 2229 * So says the Linux driver: 2230 * Work around for premature descriptor 2231 * write-backs in TSO mode. Append a 2232 * 4-byte sentinel descriptor. 2233 */ 2234 if (use_tso && 2235 seg == dmamap->dm_nsegs - 1 && 2236 curlen > 8) 2237 curlen -= 4; 2238 2239 wm_set_dma_addr( 2240 &sc->sc_txdescs[nexttx].wtx_addr, 2241 curaddr); 2242 sc->sc_txdescs[nexttx].wtx_cmdlen = 2243 htole32(cksumcmd | curlen); 2244 sc->sc_txdescs[nexttx].wtx_fields.wtxu_status = 2245 0; 2246 sc->sc_txdescs[nexttx].wtx_fields.wtxu_options = 2247 cksumfields; 2248 sc->sc_txdescs[nexttx].wtx_fields.wtxu_vlan = 0; 2249 lasttx = nexttx; 2250 2251 DPRINTF(WM_DEBUG_TX, 2252 ("%s: TX: desc %d: low 0x%08lx, " 2253 "len 0x%04x\n", 2254 device_xname(sc->sc_dev), nexttx, 2255 curaddr & 0xffffffffUL, (unsigned)curlen)); 2256 } 2257 } 2258 2259 KASSERT(lasttx != -1); 2260 2261 /* 2262 * Set up the command byte on the last descriptor of 2263 * the packet. If we're in the interrupt delay window, 2264 * delay the interrupt. 2265 */ 2266 sc->sc_txdescs[lasttx].wtx_cmdlen |= 2267 htole32(WTX_CMD_EOP | WTX_CMD_RS); 2268 2269 /* 2270 * If VLANs are enabled and the packet has a VLAN tag, set 2271 * up the descriptor to encapsulate the packet for us. 2272 * 2273 * This is only valid on the last descriptor of the packet. 2274 */ 2275 if ((mtag = VLAN_OUTPUT_TAG(&sc->sc_ethercom, m0)) != NULL) { 2276 sc->sc_txdescs[lasttx].wtx_cmdlen |= 2277 htole32(WTX_CMD_VLE); 2278 sc->sc_txdescs[lasttx].wtx_fields.wtxu_vlan 2279 = htole16(VLAN_TAG_VALUE(mtag) & 0xffff); 2280 } 2281 2282 txs->txs_lastdesc = lasttx; 2283 2284 DPRINTF(WM_DEBUG_TX, 2285 ("%s: TX: desc %d: cmdlen 0x%08x\n", 2286 device_xname(sc->sc_dev), 2287 lasttx, le32toh(sc->sc_txdescs[lasttx].wtx_cmdlen))); 2288 2289 /* Sync the descriptors we're using. */ 2290 WM_CDTXSYNC(sc, sc->sc_txnext, txs->txs_ndesc, 2291 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2292 2293 /* Give the packet to the chip. */ 2294 CSR_WRITE(sc, sc->sc_tdt_reg, nexttx); 2295 2296 DPRINTF(WM_DEBUG_TX, 2297 ("%s: TX: TDT -> %d\n", device_xname(sc->sc_dev), nexttx)); 2298 2299 DPRINTF(WM_DEBUG_TX, 2300 ("%s: TX: finished transmitting packet, job %d\n", 2301 device_xname(sc->sc_dev), sc->sc_txsnext)); 2302 2303 /* Advance the tx pointer. */ 2304 sc->sc_txfree -= txs->txs_ndesc; 2305 sc->sc_txnext = nexttx; 2306 2307 sc->sc_txsfree--; 2308 sc->sc_txsnext = WM_NEXTTXS(sc, sc->sc_txsnext); 2309 2310 #if NBPFILTER > 0 2311 /* Pass the packet to any BPF listeners. */ 2312 if (ifp->if_bpf) 2313 bpf_mtap(ifp->if_bpf, m0); 2314 #endif /* NBPFILTER > 0 */ 2315 } 2316 2317 if (sc->sc_txsfree == 0 || sc->sc_txfree <= 2) { 2318 /* No more slots; notify upper layer. */ 2319 ifp->if_flags |= IFF_OACTIVE; 2320 } 2321 2322 if (sc->sc_txfree != ofree) { 2323 /* Set a watchdog timer in case the chip flakes out. */ 2324 ifp->if_timer = 5; 2325 } 2326 } 2327 2328 /* 2329 * wm_watchdog: [ifnet interface function] 2330 * 2331 * Watchdog timer handler. 2332 */ 2333 static void 2334 wm_watchdog(struct ifnet *ifp) 2335 { 2336 struct wm_softc *sc = ifp->if_softc; 2337 2338 /* 2339 * Since we're using delayed interrupts, sweep up 2340 * before we report an error. 2341 */ 2342 wm_txintr(sc); 2343 2344 if (sc->sc_txfree != WM_NTXDESC(sc)) { 2345 log(LOG_ERR, 2346 "%s: device timeout (txfree %d txsfree %d txnext %d)\n", 2347 device_xname(sc->sc_dev), sc->sc_txfree, sc->sc_txsfree, 2348 sc->sc_txnext); 2349 ifp->if_oerrors++; 2350 2351 /* Reset the interface. */ 2352 (void) wm_init(ifp); 2353 } 2354 2355 /* Try to get more packets going. */ 2356 wm_start(ifp); 2357 } 2358 2359 /* 2360 * wm_ioctl: [ifnet interface function] 2361 * 2362 * Handle control requests from the operator. 2363 */ 2364 static int 2365 wm_ioctl(struct ifnet *ifp, u_long cmd, void *data) 2366 { 2367 struct wm_softc *sc = ifp->if_softc; 2368 struct ifreq *ifr = (struct ifreq *) data; 2369 struct ifaddr *ifa = (struct ifaddr *)data; 2370 struct sockaddr_dl *sdl; 2371 int diff, s, error; 2372 2373 s = splnet(); 2374 2375 switch (cmd) { 2376 case SIOCSIFFLAGS: 2377 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 2378 break; 2379 if (ifp->if_flags & IFF_UP) { 2380 diff = (ifp->if_flags ^ sc->sc_if_flags) 2381 & (IFF_PROMISC | IFF_ALLMULTI); 2382 if ((diff & (IFF_PROMISC | IFF_ALLMULTI)) != 0) { 2383 /* 2384 * If the difference bettween last flag and 2385 * new flag is only IFF_PROMISC or 2386 * IFF_ALLMULTI, set multicast filter only 2387 * (don't reset to prevent link down). 2388 */ 2389 wm_set_filter(sc); 2390 } else { 2391 /* 2392 * Reset the interface to pick up changes in 2393 * any other flags that affect the hardware 2394 * state. 2395 */ 2396 wm_init(ifp); 2397 } 2398 } else { 2399 if (ifp->if_flags & IFF_RUNNING) 2400 wm_stop(ifp, 1); 2401 } 2402 sc->sc_if_flags = ifp->if_flags; 2403 error = 0; 2404 break; 2405 case SIOCSIFMEDIA: 2406 case SIOCGIFMEDIA: 2407 /* Flow control requires full-duplex mode. */ 2408 if (IFM_SUBTYPE(ifr->ifr_media) == IFM_AUTO || 2409 (ifr->ifr_media & IFM_FDX) == 0) 2410 ifr->ifr_media &= ~IFM_ETH_FMASK; 2411 if (IFM_SUBTYPE(ifr->ifr_media) != IFM_AUTO) { 2412 if ((ifr->ifr_media & IFM_ETH_FMASK) == IFM_FLOW) { 2413 /* We can do both TXPAUSE and RXPAUSE. */ 2414 ifr->ifr_media |= 2415 IFM_ETH_TXPAUSE | IFM_ETH_RXPAUSE; 2416 } 2417 sc->sc_flowflags = ifr->ifr_media & IFM_ETH_FMASK; 2418 } 2419 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); 2420 break; 2421 case SIOCINITIFADDR: 2422 if (ifa->ifa_addr->sa_family == AF_LINK) { 2423 sdl = satosdl(ifp->if_dl->ifa_addr); 2424 (void)sockaddr_dl_setaddr(sdl, sdl->sdl_len, 2425 LLADDR(satosdl(ifa->ifa_addr)), 2426 ifp->if_addrlen); 2427 /* unicast address is first multicast entry */ 2428 wm_set_filter(sc); 2429 error = 0; 2430 break; 2431 } 2432 /* Fall through for rest */ 2433 default: 2434 if ((error = ether_ioctl(ifp, cmd, data)) != ENETRESET) 2435 break; 2436 2437 error = 0; 2438 2439 if (cmd == SIOCSIFCAP) 2440 error = (*ifp->if_init)(ifp); 2441 else if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI) 2442 ; 2443 else if (ifp->if_flags & IFF_RUNNING) { 2444 /* 2445 * Multicast list has changed; set the hardware filter 2446 * accordingly. 2447 */ 2448 wm_set_filter(sc); 2449 } 2450 break; 2451 } 2452 2453 /* Try to get more packets going. */ 2454 wm_start(ifp); 2455 2456 splx(s); 2457 return (error); 2458 } 2459 2460 /* 2461 * wm_intr: 2462 * 2463 * Interrupt service routine. 2464 */ 2465 static int 2466 wm_intr(void *arg) 2467 { 2468 struct wm_softc *sc = arg; 2469 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2470 uint32_t icr; 2471 int handled = 0; 2472 2473 while (1 /* CONSTCOND */) { 2474 icr = CSR_READ(sc, WMREG_ICR); 2475 if ((icr & sc->sc_icr) == 0) 2476 break; 2477 #if 0 /*NRND > 0*/ 2478 if (RND_ENABLED(&sc->rnd_source)) 2479 rnd_add_uint32(&sc->rnd_source, icr); 2480 #endif 2481 2482 handled = 1; 2483 2484 #if defined(WM_DEBUG) || defined(WM_EVENT_COUNTERS) 2485 if (icr & (ICR_RXDMT0|ICR_RXT0)) { 2486 DPRINTF(WM_DEBUG_RX, 2487 ("%s: RX: got Rx intr 0x%08x\n", 2488 device_xname(sc->sc_dev), 2489 icr & (ICR_RXDMT0|ICR_RXT0))); 2490 WM_EVCNT_INCR(&sc->sc_ev_rxintr); 2491 } 2492 #endif 2493 wm_rxintr(sc); 2494 2495 #if defined(WM_DEBUG) || defined(WM_EVENT_COUNTERS) 2496 if (icr & ICR_TXDW) { 2497 DPRINTF(WM_DEBUG_TX, 2498 ("%s: TX: got TXDW interrupt\n", 2499 device_xname(sc->sc_dev))); 2500 WM_EVCNT_INCR(&sc->sc_ev_txdw); 2501 } 2502 #endif 2503 wm_txintr(sc); 2504 2505 if (icr & (ICR_LSC|ICR_RXSEQ|ICR_RXCFG)) { 2506 WM_EVCNT_INCR(&sc->sc_ev_linkintr); 2507 wm_linkintr(sc, icr); 2508 } 2509 2510 if (icr & ICR_RXO) { 2511 ifp->if_ierrors++; 2512 #if defined(WM_DEBUG) 2513 log(LOG_WARNING, "%s: Receive overrun\n", 2514 device_xname(sc->sc_dev)); 2515 #endif /* defined(WM_DEBUG) */ 2516 } 2517 } 2518 2519 if (handled) { 2520 /* Try to get more packets going. */ 2521 wm_start(ifp); 2522 } 2523 2524 return (handled); 2525 } 2526 2527 /* 2528 * wm_txintr: 2529 * 2530 * Helper; handle transmit interrupts. 2531 */ 2532 static void 2533 wm_txintr(struct wm_softc *sc) 2534 { 2535 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2536 struct wm_txsoft *txs; 2537 uint8_t status; 2538 int i; 2539 2540 ifp->if_flags &= ~IFF_OACTIVE; 2541 2542 /* 2543 * Go through the Tx list and free mbufs for those 2544 * frames which have been transmitted. 2545 */ 2546 for (i = sc->sc_txsdirty; sc->sc_txsfree != WM_TXQUEUELEN(sc); 2547 i = WM_NEXTTXS(sc, i), sc->sc_txsfree++) { 2548 txs = &sc->sc_txsoft[i]; 2549 2550 DPRINTF(WM_DEBUG_TX, 2551 ("%s: TX: checking job %d\n", device_xname(sc->sc_dev), i)); 2552 2553 WM_CDTXSYNC(sc, txs->txs_firstdesc, txs->txs_ndesc, 2554 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2555 2556 status = 2557 sc->sc_txdescs[txs->txs_lastdesc].wtx_fields.wtxu_status; 2558 if ((status & WTX_ST_DD) == 0) { 2559 WM_CDTXSYNC(sc, txs->txs_lastdesc, 1, 2560 BUS_DMASYNC_PREREAD); 2561 break; 2562 } 2563 2564 DPRINTF(WM_DEBUG_TX, 2565 ("%s: TX: job %d done: descs %d..%d\n", 2566 device_xname(sc->sc_dev), i, txs->txs_firstdesc, 2567 txs->txs_lastdesc)); 2568 2569 /* 2570 * XXX We should probably be using the statistics 2571 * XXX registers, but I don't know if they exist 2572 * XXX on chips before the i82544. 2573 */ 2574 2575 #ifdef WM_EVENT_COUNTERS 2576 if (status & WTX_ST_TU) 2577 WM_EVCNT_INCR(&sc->sc_ev_tu); 2578 #endif /* WM_EVENT_COUNTERS */ 2579 2580 if (status & (WTX_ST_EC|WTX_ST_LC)) { 2581 ifp->if_oerrors++; 2582 if (status & WTX_ST_LC) 2583 log(LOG_WARNING, "%s: late collision\n", 2584 device_xname(sc->sc_dev)); 2585 else if (status & WTX_ST_EC) { 2586 ifp->if_collisions += 16; 2587 log(LOG_WARNING, "%s: excessive collisions\n", 2588 device_xname(sc->sc_dev)); 2589 } 2590 } else 2591 ifp->if_opackets++; 2592 2593 sc->sc_txfree += txs->txs_ndesc; 2594 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 2595 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); 2596 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 2597 m_freem(txs->txs_mbuf); 2598 txs->txs_mbuf = NULL; 2599 } 2600 2601 /* Update the dirty transmit buffer pointer. */ 2602 sc->sc_txsdirty = i; 2603 DPRINTF(WM_DEBUG_TX, 2604 ("%s: TX: txsdirty -> %d\n", device_xname(sc->sc_dev), i)); 2605 2606 /* 2607 * If there are no more pending transmissions, cancel the watchdog 2608 * timer. 2609 */ 2610 if (sc->sc_txsfree == WM_TXQUEUELEN(sc)) 2611 ifp->if_timer = 0; 2612 } 2613 2614 /* 2615 * wm_rxintr: 2616 * 2617 * Helper; handle receive interrupts. 2618 */ 2619 static void 2620 wm_rxintr(struct wm_softc *sc) 2621 { 2622 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2623 struct wm_rxsoft *rxs; 2624 struct mbuf *m; 2625 int i, len; 2626 uint8_t status, errors; 2627 uint16_t vlantag; 2628 2629 for (i = sc->sc_rxptr;; i = WM_NEXTRX(i)) { 2630 rxs = &sc->sc_rxsoft[i]; 2631 2632 DPRINTF(WM_DEBUG_RX, 2633 ("%s: RX: checking descriptor %d\n", 2634 device_xname(sc->sc_dev), i)); 2635 2636 WM_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2637 2638 status = sc->sc_rxdescs[i].wrx_status; 2639 errors = sc->sc_rxdescs[i].wrx_errors; 2640 len = le16toh(sc->sc_rxdescs[i].wrx_len); 2641 vlantag = sc->sc_rxdescs[i].wrx_special; 2642 2643 if ((status & WRX_ST_DD) == 0) { 2644 /* 2645 * We have processed all of the receive descriptors. 2646 */ 2647 WM_CDRXSYNC(sc, i, BUS_DMASYNC_PREREAD); 2648 break; 2649 } 2650 2651 if (__predict_false(sc->sc_rxdiscard)) { 2652 DPRINTF(WM_DEBUG_RX, 2653 ("%s: RX: discarding contents of descriptor %d\n", 2654 device_xname(sc->sc_dev), i)); 2655 WM_INIT_RXDESC(sc, i); 2656 if (status & WRX_ST_EOP) { 2657 /* Reset our state. */ 2658 DPRINTF(WM_DEBUG_RX, 2659 ("%s: RX: resetting rxdiscard -> 0\n", 2660 device_xname(sc->sc_dev))); 2661 sc->sc_rxdiscard = 0; 2662 } 2663 continue; 2664 } 2665 2666 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 2667 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); 2668 2669 m = rxs->rxs_mbuf; 2670 2671 /* 2672 * Add a new receive buffer to the ring, unless of 2673 * course the length is zero. Treat the latter as a 2674 * failed mapping. 2675 */ 2676 if ((len == 0) || (wm_add_rxbuf(sc, i) != 0)) { 2677 /* 2678 * Failed, throw away what we've done so 2679 * far, and discard the rest of the packet. 2680 */ 2681 ifp->if_ierrors++; 2682 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 2683 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 2684 WM_INIT_RXDESC(sc, i); 2685 if ((status & WRX_ST_EOP) == 0) 2686 sc->sc_rxdiscard = 1; 2687 if (sc->sc_rxhead != NULL) 2688 m_freem(sc->sc_rxhead); 2689 WM_RXCHAIN_RESET(sc); 2690 DPRINTF(WM_DEBUG_RX, 2691 ("%s: RX: Rx buffer allocation failed, " 2692 "dropping packet%s\n", device_xname(sc->sc_dev), 2693 sc->sc_rxdiscard ? " (discard)" : "")); 2694 continue; 2695 } 2696 2697 m->m_len = len; 2698 sc->sc_rxlen += len; 2699 DPRINTF(WM_DEBUG_RX, 2700 ("%s: RX: buffer at %p len %d\n", 2701 device_xname(sc->sc_dev), m->m_data, len)); 2702 2703 /* 2704 * If this is not the end of the packet, keep 2705 * looking. 2706 */ 2707 if ((status & WRX_ST_EOP) == 0) { 2708 WM_RXCHAIN_LINK(sc, m); 2709 DPRINTF(WM_DEBUG_RX, 2710 ("%s: RX: not yet EOP, rxlen -> %d\n", 2711 device_xname(sc->sc_dev), sc->sc_rxlen)); 2712 continue; 2713 } 2714 2715 /* 2716 * Okay, we have the entire packet now. The chip is 2717 * configured to include the FCS (not all chips can 2718 * be configured to strip it), so we need to trim it. 2719 * May need to adjust length of previous mbuf in the 2720 * chain if the current mbuf is too short. 2721 */ 2722 if (m->m_len < ETHER_CRC_LEN) { 2723 sc->sc_rxtail->m_len -= (ETHER_CRC_LEN - m->m_len); 2724 m->m_len = 0; 2725 } else { 2726 m->m_len -= ETHER_CRC_LEN; 2727 } 2728 len = sc->sc_rxlen - ETHER_CRC_LEN; 2729 2730 WM_RXCHAIN_LINK(sc, m); 2731 2732 *sc->sc_rxtailp = NULL; 2733 m = sc->sc_rxhead; 2734 2735 WM_RXCHAIN_RESET(sc); 2736 2737 DPRINTF(WM_DEBUG_RX, 2738 ("%s: RX: have entire packet, len -> %d\n", 2739 device_xname(sc->sc_dev), len)); 2740 2741 /* 2742 * If an error occurred, update stats and drop the packet. 2743 */ 2744 if (errors & 2745 (WRX_ER_CE|WRX_ER_SE|WRX_ER_SEQ|WRX_ER_CXE|WRX_ER_RXE)) { 2746 ifp->if_ierrors++; 2747 if (errors & WRX_ER_SE) 2748 log(LOG_WARNING, "%s: symbol error\n", 2749 device_xname(sc->sc_dev)); 2750 else if (errors & WRX_ER_SEQ) 2751 log(LOG_WARNING, "%s: receive sequence error\n", 2752 device_xname(sc->sc_dev)); 2753 else if (errors & WRX_ER_CE) 2754 log(LOG_WARNING, "%s: CRC error\n", 2755 device_xname(sc->sc_dev)); 2756 m_freem(m); 2757 continue; 2758 } 2759 2760 /* 2761 * No errors. Receive the packet. 2762 */ 2763 m->m_pkthdr.rcvif = ifp; 2764 m->m_pkthdr.len = len; 2765 2766 /* 2767 * If VLANs are enabled, VLAN packets have been unwrapped 2768 * for us. Associate the tag with the packet. 2769 */ 2770 if ((status & WRX_ST_VP) != 0) { 2771 VLAN_INPUT_TAG(ifp, m, 2772 le16toh(vlantag), 2773 continue); 2774 } 2775 2776 /* 2777 * Set up checksum info for this packet. 2778 */ 2779 if ((status & WRX_ST_IXSM) == 0) { 2780 if (status & WRX_ST_IPCS) { 2781 WM_EVCNT_INCR(&sc->sc_ev_rxipsum); 2782 m->m_pkthdr.csum_flags |= M_CSUM_IPv4; 2783 if (errors & WRX_ER_IPE) 2784 m->m_pkthdr.csum_flags |= 2785 M_CSUM_IPv4_BAD; 2786 } 2787 if (status & WRX_ST_TCPCS) { 2788 /* 2789 * Note: we don't know if this was TCP or UDP, 2790 * so we just set both bits, and expect the 2791 * upper layers to deal. 2792 */ 2793 WM_EVCNT_INCR(&sc->sc_ev_rxtusum); 2794 m->m_pkthdr.csum_flags |= 2795 M_CSUM_TCPv4 | M_CSUM_UDPv4 | 2796 M_CSUM_TCPv6 | M_CSUM_UDPv6; 2797 if (errors & WRX_ER_TCPE) 2798 m->m_pkthdr.csum_flags |= 2799 M_CSUM_TCP_UDP_BAD; 2800 } 2801 } 2802 2803 ifp->if_ipackets++; 2804 2805 #if NBPFILTER > 0 2806 /* Pass this up to any BPF listeners. */ 2807 if (ifp->if_bpf) 2808 bpf_mtap(ifp->if_bpf, m); 2809 #endif /* NBPFILTER > 0 */ 2810 2811 /* Pass it on. */ 2812 (*ifp->if_input)(ifp, m); 2813 } 2814 2815 /* Update the receive pointer. */ 2816 sc->sc_rxptr = i; 2817 2818 DPRINTF(WM_DEBUG_RX, 2819 ("%s: RX: rxptr -> %d\n", device_xname(sc->sc_dev), i)); 2820 } 2821 2822 /* 2823 * wm_linkintr: 2824 * 2825 * Helper; handle link interrupts. 2826 */ 2827 static void 2828 wm_linkintr(struct wm_softc *sc, uint32_t icr) 2829 { 2830 uint32_t status; 2831 2832 DPRINTF(WM_DEBUG_LINK, ("%s: %s:\n", device_xname(sc->sc_dev), 2833 __func__)); 2834 /* 2835 * If we get a link status interrupt on a 1000BASE-T 2836 * device, just fall into the normal MII tick path. 2837 */ 2838 if (sc->sc_flags & WM_F_HAS_MII) { 2839 if (icr & ICR_LSC) { 2840 DPRINTF(WM_DEBUG_LINK, 2841 ("%s: LINK: LSC -> mii_tick\n", 2842 device_xname(sc->sc_dev))); 2843 mii_tick(&sc->sc_mii); 2844 if (sc->sc_type == WM_T_82543) { 2845 int miistatus, active; 2846 2847 /* 2848 * With 82543, we need to force speed and 2849 * duplex on the MAC equal to what the PHY 2850 * speed and duplex configuration is. 2851 */ 2852 miistatus = sc->sc_mii.mii_media_status; 2853 2854 if (miistatus & IFM_ACTIVE) { 2855 active = sc->sc_mii.mii_media_active; 2856 sc->sc_ctrl &= ~(CTRL_SPEED_MASK 2857 | CTRL_FD); 2858 switch (IFM_SUBTYPE(active)) { 2859 case IFM_10_T: 2860 sc->sc_ctrl |= CTRL_SPEED_10; 2861 break; 2862 case IFM_100_TX: 2863 sc->sc_ctrl |= CTRL_SPEED_100; 2864 break; 2865 case IFM_1000_T: 2866 sc->sc_ctrl |= CTRL_SPEED_1000; 2867 break; 2868 default: 2869 /* 2870 * fiber? 2871 * Shoud not enter here. 2872 */ 2873 printf("unknown media (%x)\n", 2874 active); 2875 break; 2876 } 2877 if (active & IFM_FDX) 2878 sc->sc_ctrl |= CTRL_FD; 2879 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 2880 } 2881 } 2882 } else if (icr & ICR_RXSEQ) { 2883 DPRINTF(WM_DEBUG_LINK, 2884 ("%s: LINK Receive sequence error\n", 2885 device_xname(sc->sc_dev))); 2886 } 2887 return; 2888 } 2889 2890 status = CSR_READ(sc, WMREG_STATUS); 2891 if (icr & ICR_LSC) { 2892 if (status & STATUS_LU) { 2893 DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> up %s\n", 2894 device_xname(sc->sc_dev), 2895 (status & STATUS_FD) ? "FDX" : "HDX")); 2896 /* 2897 * NOTE: CTRL will update TFCE and RFCE automatically, 2898 * so we should update sc->sc_ctrl 2899 */ 2900 2901 sc->sc_ctrl = CSR_READ(sc, WMREG_CTRL); 2902 sc->sc_tctl &= ~TCTL_COLD(0x3ff); 2903 sc->sc_fcrtl &= ~FCRTL_XONE; 2904 if (status & STATUS_FD) 2905 sc->sc_tctl |= 2906 TCTL_COLD(TX_COLLISION_DISTANCE_FDX); 2907 else 2908 sc->sc_tctl |= 2909 TCTL_COLD(TX_COLLISION_DISTANCE_HDX); 2910 if (sc->sc_ctrl & CTRL_TFCE) 2911 sc->sc_fcrtl |= FCRTL_XONE; 2912 CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); 2913 CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? 2914 WMREG_OLD_FCRTL : WMREG_FCRTL, 2915 sc->sc_fcrtl); 2916 sc->sc_tbi_linkup = 1; 2917 } else { 2918 DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> down\n", 2919 device_xname(sc->sc_dev))); 2920 sc->sc_tbi_linkup = 0; 2921 } 2922 wm_tbi_set_linkled(sc); 2923 } else if (icr & ICR_RXCFG) { 2924 DPRINTF(WM_DEBUG_LINK, ("%s: LINK: receiving /C/\n", 2925 device_xname(sc->sc_dev))); 2926 sc->sc_tbi_nrxcfg++; 2927 wm_check_for_link(sc); 2928 } else if (icr & ICR_RXSEQ) { 2929 DPRINTF(WM_DEBUG_LINK, 2930 ("%s: LINK: Receive sequence error\n", 2931 device_xname(sc->sc_dev))); 2932 } 2933 } 2934 2935 /* 2936 * wm_tick: 2937 * 2938 * One second timer, used to check link status, sweep up 2939 * completed transmit jobs, etc. 2940 */ 2941 static void 2942 wm_tick(void *arg) 2943 { 2944 struct wm_softc *sc = arg; 2945 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2946 int s; 2947 2948 s = splnet(); 2949 2950 if (sc->sc_type >= WM_T_82542_2_1) { 2951 WM_EVCNT_ADD(&sc->sc_ev_rx_xon, CSR_READ(sc, WMREG_XONRXC)); 2952 WM_EVCNT_ADD(&sc->sc_ev_tx_xon, CSR_READ(sc, WMREG_XONTXC)); 2953 WM_EVCNT_ADD(&sc->sc_ev_rx_xoff, CSR_READ(sc, WMREG_XOFFRXC)); 2954 WM_EVCNT_ADD(&sc->sc_ev_tx_xoff, CSR_READ(sc, WMREG_XOFFTXC)); 2955 WM_EVCNT_ADD(&sc->sc_ev_rx_macctl, CSR_READ(sc, WMREG_FCRUC)); 2956 } 2957 2958 ifp->if_collisions += CSR_READ(sc, WMREG_COLC); 2959 ifp->if_ierrors += CSR_READ(sc, WMREG_RXERRC); 2960 2961 2962 if (sc->sc_flags & WM_F_HAS_MII) 2963 mii_tick(&sc->sc_mii); 2964 else 2965 wm_tbi_check_link(sc); 2966 2967 splx(s); 2968 2969 callout_reset(&sc->sc_tick_ch, hz, wm_tick, sc); 2970 } 2971 2972 /* 2973 * wm_reset: 2974 * 2975 * Reset the i82542 chip. 2976 */ 2977 static void 2978 wm_reset(struct wm_softc *sc) 2979 { 2980 uint32_t reg; 2981 2982 /* 2983 * Allocate on-chip memory according to the MTU size. 2984 * The Packet Buffer Allocation register must be written 2985 * before the chip is reset. 2986 */ 2987 switch (sc->sc_type) { 2988 case WM_T_82547: 2989 case WM_T_82547_2: 2990 sc->sc_pba = sc->sc_ethercom.ec_if.if_mtu > 8192 ? 2991 PBA_22K : PBA_30K; 2992 sc->sc_txfifo_head = 0; 2993 sc->sc_txfifo_addr = sc->sc_pba << PBA_ADDR_SHIFT; 2994 sc->sc_txfifo_size = 2995 (PBA_40K - sc->sc_pba) << PBA_BYTE_SHIFT; 2996 sc->sc_txfifo_stall = 0; 2997 break; 2998 case WM_T_82571: 2999 case WM_T_82572: 3000 case WM_T_80003: 3001 sc->sc_pba = PBA_32K; 3002 break; 3003 case WM_T_82573: 3004 case WM_T_82574: 3005 sc->sc_pba = PBA_12K; 3006 break; 3007 case WM_T_ICH8: 3008 sc->sc_pba = PBA_8K; 3009 CSR_WRITE(sc, WMREG_PBS, PBA_16K); 3010 break; 3011 case WM_T_ICH9: 3012 case WM_T_ICH10: 3013 sc->sc_pba = PBA_10K; 3014 break; 3015 default: 3016 sc->sc_pba = sc->sc_ethercom.ec_if.if_mtu > 8192 ? 3017 PBA_40K : PBA_48K; 3018 break; 3019 } 3020 CSR_WRITE(sc, WMREG_PBA, sc->sc_pba); 3021 3022 if (sc->sc_flags & WM_F_PCIE) { 3023 int timeout = 800; 3024 3025 sc->sc_ctrl |= CTRL_GIO_M_DIS; 3026 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 3027 3028 while (timeout) { 3029 if ((CSR_READ(sc, WMREG_STATUS) & STATUS_GIO_M_ENA) == 0) 3030 break; 3031 delay(100); 3032 } 3033 } 3034 3035 /* clear interrupt */ 3036 CSR_WRITE(sc, WMREG_IMC, 0xffffffffU); 3037 3038 /* 3039 * 82541 Errata 29? & 82547 Errata 28? 3040 * See also the description about PHY_RST bit in CTRL register 3041 * in 8254x_GBe_SDM.pdf. 3042 */ 3043 if ((sc->sc_type == WM_T_82541) || (sc->sc_type == WM_T_82547)) { 3044 CSR_WRITE(sc, WMREG_CTRL, 3045 CSR_READ(sc, WMREG_CTRL) | CTRL_PHY_RESET); 3046 delay(5000); 3047 } 3048 3049 switch (sc->sc_type) { 3050 case WM_T_82544: 3051 case WM_T_82540: 3052 case WM_T_82545: 3053 case WM_T_82546: 3054 case WM_T_82541: 3055 case WM_T_82541_2: 3056 /* 3057 * On some chipsets, a reset through a memory-mapped write 3058 * cycle can cause the chip to reset before completing the 3059 * write cycle. This causes major headache that can be 3060 * avoided by issuing the reset via indirect register writes 3061 * through I/O space. 3062 * 3063 * So, if we successfully mapped the I/O BAR at attach time, 3064 * use that. Otherwise, try our luck with a memory-mapped 3065 * reset. 3066 */ 3067 if (sc->sc_flags & WM_F_IOH_VALID) 3068 wm_io_write(sc, WMREG_CTRL, CTRL_RST); 3069 else 3070 CSR_WRITE(sc, WMREG_CTRL, CTRL_RST); 3071 break; 3072 3073 case WM_T_82545_3: 3074 case WM_T_82546_3: 3075 /* Use the shadow control register on these chips. */ 3076 CSR_WRITE(sc, WMREG_CTRL_SHADOW, CTRL_RST); 3077 break; 3078 3079 case WM_T_ICH8: 3080 case WM_T_ICH9: 3081 case WM_T_ICH10: 3082 wm_get_swfwhw_semaphore(sc); 3083 CSR_WRITE(sc, WMREG_CTRL, CTRL_RST | CTRL_PHY_RESET); 3084 delay(10000); 3085 3086 default: 3087 /* Everything else can safely use the documented method. */ 3088 CSR_WRITE(sc, WMREG_CTRL, CTRL_RST); 3089 break; 3090 } 3091 delay(10000); 3092 3093 /* reload EEPROM */ 3094 switch(sc->sc_type) { 3095 case WM_T_82542_2_0: 3096 case WM_T_82542_2_1: 3097 case WM_T_82543: 3098 case WM_T_82544: 3099 delay(10); 3100 reg = CSR_READ(sc, WMREG_CTRL_EXT) | CTRL_EXT_EE_RST; 3101 CSR_WRITE(sc, WMREG_CTRL_EXT, reg); 3102 delay(2000); 3103 break; 3104 case WM_T_82541: 3105 case WM_T_82541_2: 3106 case WM_T_82547: 3107 case WM_T_82547_2: 3108 delay(20000); 3109 break; 3110 case WM_T_82573: 3111 case WM_T_82574: 3112 if (sc->sc_flags & WM_F_EEPROM_FLASH) { 3113 delay(10); 3114 reg = CSR_READ(sc, WMREG_CTRL_EXT) | CTRL_EXT_EE_RST; 3115 CSR_WRITE(sc, WMREG_CTRL_EXT, reg); 3116 } 3117 /* FALLTHROUGH */ 3118 default: 3119 /* check EECD_EE_AUTORD */ 3120 wm_get_auto_rd_done(sc); 3121 } 3122 3123 /* reload sc_ctrl */ 3124 sc->sc_ctrl = CSR_READ(sc, WMREG_CTRL); 3125 3126 #if 0 3127 for (i = 0; i < 1000; i++) { 3128 if ((CSR_READ(sc, WMREG_CTRL) & CTRL_RST) == 0) { 3129 return; 3130 } 3131 delay(20); 3132 } 3133 3134 if (CSR_READ(sc, WMREG_CTRL) & CTRL_RST) 3135 log(LOG_ERR, "%s: reset failed to complete\n", 3136 device_xname(sc->sc_dev)); 3137 #endif 3138 } 3139 3140 /* 3141 * wm_init: [ifnet interface function] 3142 * 3143 * Initialize the interface. Must be called at splnet(). 3144 */ 3145 static int 3146 wm_init(struct ifnet *ifp) 3147 { 3148 struct wm_softc *sc = ifp->if_softc; 3149 struct wm_rxsoft *rxs; 3150 int i, error = 0; 3151 uint32_t reg; 3152 3153 /* 3154 * *_HDR_ALIGNED_P is constant 1 if __NO_STRICT_ALIGMENT is set. 3155 * There is a small but measurable benefit to avoiding the adjusment 3156 * of the descriptor so that the headers are aligned, for normal mtu, 3157 * on such platforms. One possibility is that the DMA itself is 3158 * slightly more efficient if the front of the entire packet (instead 3159 * of the front of the headers) is aligned. 3160 * 3161 * Note we must always set align_tweak to 0 if we are using 3162 * jumbo frames. 3163 */ 3164 #ifdef __NO_STRICT_ALIGNMENT 3165 sc->sc_align_tweak = 0; 3166 #else 3167 if ((ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN) > (MCLBYTES - 2)) 3168 sc->sc_align_tweak = 0; 3169 else 3170 sc->sc_align_tweak = 2; 3171 #endif /* __NO_STRICT_ALIGNMENT */ 3172 3173 /* Cancel any pending I/O. */ 3174 wm_stop(ifp, 0); 3175 3176 /* update statistics before reset */ 3177 ifp->if_collisions += CSR_READ(sc, WMREG_COLC); 3178 ifp->if_ierrors += CSR_READ(sc, WMREG_RXERRC); 3179 3180 /* Reset the chip to a known state. */ 3181 wm_reset(sc); 3182 3183 switch (sc->sc_type) { 3184 case WM_T_82571: 3185 case WM_T_82572: 3186 case WM_T_82573: 3187 case WM_T_82574: 3188 case WM_T_80003: 3189 case WM_T_ICH8: 3190 case WM_T_ICH9: 3191 case WM_T_ICH10: 3192 if (wm_check_mng_mode(sc) != 0) 3193 wm_get_hw_control(sc); 3194 break; 3195 default: 3196 break; 3197 } 3198 3199 /* Initialize the transmit descriptor ring. */ 3200 memset(sc->sc_txdescs, 0, WM_TXDESCSIZE(sc)); 3201 WM_CDTXSYNC(sc, 0, WM_NTXDESC(sc), 3202 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3203 sc->sc_txfree = WM_NTXDESC(sc); 3204 sc->sc_txnext = 0; 3205 3206 if (sc->sc_type < WM_T_82543) { 3207 CSR_WRITE(sc, WMREG_OLD_TBDAH, WM_CDTXADDR_HI(sc, 0)); 3208 CSR_WRITE(sc, WMREG_OLD_TBDAL, WM_CDTXADDR_LO(sc, 0)); 3209 CSR_WRITE(sc, WMREG_OLD_TDLEN, WM_TXDESCSIZE(sc)); 3210 CSR_WRITE(sc, WMREG_OLD_TDH, 0); 3211 CSR_WRITE(sc, WMREG_OLD_TDT, 0); 3212 CSR_WRITE(sc, WMREG_OLD_TIDV, 128); 3213 } else { 3214 CSR_WRITE(sc, WMREG_TBDAH, WM_CDTXADDR_HI(sc, 0)); 3215 CSR_WRITE(sc, WMREG_TBDAL, WM_CDTXADDR_LO(sc, 0)); 3216 CSR_WRITE(sc, WMREG_TDLEN, WM_TXDESCSIZE(sc)); 3217 CSR_WRITE(sc, WMREG_TDH, 0); 3218 CSR_WRITE(sc, WMREG_TDT, 0); 3219 CSR_WRITE(sc, WMREG_TIDV, 375); /* ITR / 4 */ 3220 CSR_WRITE(sc, WMREG_TADV, 375); /* should be same */ 3221 3222 CSR_WRITE(sc, WMREG_TXDCTL, TXDCTL_PTHRESH(0) | 3223 TXDCTL_HTHRESH(0) | TXDCTL_WTHRESH(0)); 3224 CSR_WRITE(sc, WMREG_RXDCTL, RXDCTL_PTHRESH(0) | 3225 RXDCTL_HTHRESH(0) | RXDCTL_WTHRESH(1)); 3226 } 3227 CSR_WRITE(sc, WMREG_TQSA_LO, 0); 3228 CSR_WRITE(sc, WMREG_TQSA_HI, 0); 3229 3230 /* Initialize the transmit job descriptors. */ 3231 for (i = 0; i < WM_TXQUEUELEN(sc); i++) 3232 sc->sc_txsoft[i].txs_mbuf = NULL; 3233 sc->sc_txsfree = WM_TXQUEUELEN(sc); 3234 sc->sc_txsnext = 0; 3235 sc->sc_txsdirty = 0; 3236 3237 /* 3238 * Initialize the receive descriptor and receive job 3239 * descriptor rings. 3240 */ 3241 if (sc->sc_type < WM_T_82543) { 3242 CSR_WRITE(sc, WMREG_OLD_RDBAH0, WM_CDRXADDR_HI(sc, 0)); 3243 CSR_WRITE(sc, WMREG_OLD_RDBAL0, WM_CDRXADDR_LO(sc, 0)); 3244 CSR_WRITE(sc, WMREG_OLD_RDLEN0, sizeof(sc->sc_rxdescs)); 3245 CSR_WRITE(sc, WMREG_OLD_RDH0, 0); 3246 CSR_WRITE(sc, WMREG_OLD_RDT0, 0); 3247 CSR_WRITE(sc, WMREG_OLD_RDTR0, 28 | RDTR_FPD); 3248 3249 CSR_WRITE(sc, WMREG_OLD_RDBA1_HI, 0); 3250 CSR_WRITE(sc, WMREG_OLD_RDBA1_LO, 0); 3251 CSR_WRITE(sc, WMREG_OLD_RDLEN1, 0); 3252 CSR_WRITE(sc, WMREG_OLD_RDH1, 0); 3253 CSR_WRITE(sc, WMREG_OLD_RDT1, 0); 3254 CSR_WRITE(sc, WMREG_OLD_RDTR1, 0); 3255 } else { 3256 CSR_WRITE(sc, WMREG_RDBAH, WM_CDRXADDR_HI(sc, 0)); 3257 CSR_WRITE(sc, WMREG_RDBAL, WM_CDRXADDR_LO(sc, 0)); 3258 CSR_WRITE(sc, WMREG_RDLEN, sizeof(sc->sc_rxdescs)); 3259 CSR_WRITE(sc, WMREG_RDH, 0); 3260 CSR_WRITE(sc, WMREG_RDT, 0); 3261 CSR_WRITE(sc, WMREG_RDTR, 375 | RDTR_FPD); /* ITR/4 */ 3262 CSR_WRITE(sc, WMREG_RADV, 375); /* MUST be same */ 3263 } 3264 for (i = 0; i < WM_NRXDESC; i++) { 3265 rxs = &sc->sc_rxsoft[i]; 3266 if (rxs->rxs_mbuf == NULL) { 3267 if ((error = wm_add_rxbuf(sc, i)) != 0) { 3268 log(LOG_ERR, "%s: unable to allocate or map rx " 3269 "buffer %d, error = %d\n", 3270 device_xname(sc->sc_dev), i, error); 3271 /* 3272 * XXX Should attempt to run with fewer receive 3273 * XXX buffers instead of just failing. 3274 */ 3275 wm_rxdrain(sc); 3276 goto out; 3277 } 3278 } else 3279 WM_INIT_RXDESC(sc, i); 3280 } 3281 sc->sc_rxptr = 0; 3282 sc->sc_rxdiscard = 0; 3283 WM_RXCHAIN_RESET(sc); 3284 3285 /* 3286 * Clear out the VLAN table -- we don't use it (yet). 3287 */ 3288 CSR_WRITE(sc, WMREG_VET, 0); 3289 for (i = 0; i < WM_VLAN_TABSIZE; i++) 3290 CSR_WRITE(sc, WMREG_VFTA + (i << 2), 0); 3291 3292 /* 3293 * Set up flow-control parameters. 3294 * 3295 * XXX Values could probably stand some tuning. 3296 */ 3297 if ((sc->sc_type != WM_T_ICH8) && (sc->sc_type != WM_T_ICH9) 3298 && (sc->sc_type != WM_T_ICH10)) { 3299 CSR_WRITE(sc, WMREG_FCAL, FCAL_CONST); 3300 CSR_WRITE(sc, WMREG_FCAH, FCAH_CONST); 3301 CSR_WRITE(sc, WMREG_FCT, ETHERTYPE_FLOWCONTROL); 3302 } 3303 3304 sc->sc_fcrtl = FCRTL_DFLT; 3305 if (sc->sc_type < WM_T_82543) { 3306 CSR_WRITE(sc, WMREG_OLD_FCRTH, FCRTH_DFLT); 3307 CSR_WRITE(sc, WMREG_OLD_FCRTL, sc->sc_fcrtl); 3308 } else { 3309 CSR_WRITE(sc, WMREG_FCRTH, FCRTH_DFLT); 3310 CSR_WRITE(sc, WMREG_FCRTL, sc->sc_fcrtl); 3311 } 3312 3313 if (sc->sc_type == WM_T_80003) 3314 CSR_WRITE(sc, WMREG_FCTTV, 0xffff); 3315 else 3316 CSR_WRITE(sc, WMREG_FCTTV, FCTTV_DFLT); 3317 3318 /* Deal with VLAN enables. */ 3319 if (VLAN_ATTACHED(&sc->sc_ethercom)) 3320 sc->sc_ctrl |= CTRL_VME; 3321 else 3322 sc->sc_ctrl &= ~CTRL_VME; 3323 3324 /* Write the control registers. */ 3325 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 3326 3327 if (sc->sc_flags & WM_F_HAS_MII) { 3328 int val; 3329 3330 switch (sc->sc_type) { 3331 case WM_T_80003: 3332 case WM_T_ICH8: 3333 case WM_T_ICH9: 3334 case WM_T_ICH10: 3335 /* 3336 * Set the mac to wait the maximum time between each 3337 * iteration and increase the max iterations when 3338 * polling the phy; this fixes erroneous timeouts at 3339 * 10Mbps. 3340 */ 3341 wm_kmrn_writereg(sc, KUMCTRLSTA_OFFSET_TIMEOUTS, 3342 0xFFFF); 3343 val = wm_kmrn_readreg(sc, 3344 KUMCTRLSTA_OFFSET_INB_PARAM); 3345 val |= 0x3F; 3346 wm_kmrn_writereg(sc, 3347 KUMCTRLSTA_OFFSET_INB_PARAM, val); 3348 break; 3349 default: 3350 break; 3351 } 3352 3353 if (sc->sc_type == WM_T_80003) { 3354 val = CSR_READ(sc, WMREG_CTRL_EXT); 3355 val &= ~CTRL_EXT_LINK_MODE_MASK; 3356 CSR_WRITE(sc, WMREG_CTRL_EXT, val); 3357 3358 /* Bypass RX and TX FIFO's */ 3359 wm_kmrn_writereg(sc, KUMCTRLSTA_OFFSET_FIFO_CTRL, 3360 KUMCTRLSTA_FIFO_CTRL_RX_BYPASS | 3361 KUMCTRLSTA_FIFO_CTRL_TX_BYPASS); 3362 3363 wm_kmrn_writereg(sc, KUMCTRLSTA_OFFSET_INB_CTRL, 3364 KUMCTRLSTA_INB_CTRL_DIS_PADDING | 3365 KUMCTRLSTA_INB_CTRL_LINK_TMOUT_DFLT); 3366 } 3367 } 3368 #if 0 3369 CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext); 3370 #endif 3371 3372 /* 3373 * Set up checksum offload parameters. 3374 */ 3375 reg = CSR_READ(sc, WMREG_RXCSUM); 3376 reg &= ~(RXCSUM_IPOFL | RXCSUM_IPV6OFL | RXCSUM_TUOFL); 3377 if (ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) 3378 reg |= RXCSUM_IPOFL; 3379 if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 3380 reg |= RXCSUM_IPOFL | RXCSUM_TUOFL; 3381 if (ifp->if_capenable & (IFCAP_CSUM_TCPv6_Rx | IFCAP_CSUM_UDPv6_Rx)) 3382 reg |= RXCSUM_IPV6OFL | RXCSUM_TUOFL; 3383 CSR_WRITE(sc, WMREG_RXCSUM, reg); 3384 3385 /* Reset TBI's RXCFG count */ 3386 sc->sc_tbi_nrxcfg = sc->sc_tbi_lastnrxcfg = 0; 3387 3388 /* 3389 * Set up the interrupt registers. 3390 */ 3391 CSR_WRITE(sc, WMREG_IMC, 0xffffffffU); 3392 sc->sc_icr = ICR_TXDW | ICR_LSC | ICR_RXSEQ | ICR_RXDMT0 | 3393 ICR_RXO | ICR_RXT0; 3394 if ((sc->sc_flags & WM_F_HAS_MII) == 0) 3395 sc->sc_icr |= ICR_RXCFG; 3396 CSR_WRITE(sc, WMREG_IMS, sc->sc_icr); 3397 3398 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 3399 || (sc->sc_type == WM_T_ICH10)) { 3400 reg = CSR_READ(sc, WMREG_KABGTXD); 3401 reg |= KABGTXD_BGSQLBIAS; 3402 CSR_WRITE(sc, WMREG_KABGTXD, reg); 3403 } 3404 3405 /* Set up the inter-packet gap. */ 3406 CSR_WRITE(sc, WMREG_TIPG, sc->sc_tipg); 3407 3408 if (sc->sc_type >= WM_T_82543) { 3409 /* 3410 * Set up the interrupt throttling register (units of 256ns) 3411 * Note that a footnote in Intel's documentation says this 3412 * ticker runs at 1/4 the rate when the chip is in 100Mbit 3413 * or 10Mbit mode. Empirically, it appears to be the case 3414 * that that is also true for the 1024ns units of the other 3415 * interrupt-related timer registers -- so, really, we ought 3416 * to divide this value by 4 when the link speed is low. 3417 * 3418 * XXX implement this division at link speed change! 3419 */ 3420 3421 /* 3422 * For N interrupts/sec, set this value to: 3423 * 1000000000 / (N * 256). Note that we set the 3424 * absolute and packet timer values to this value 3425 * divided by 4 to get "simple timer" behavior. 3426 */ 3427 3428 sc->sc_itr = 1500; /* 2604 ints/sec */ 3429 CSR_WRITE(sc, WMREG_ITR, sc->sc_itr); 3430 } 3431 3432 /* Set the VLAN ethernetype. */ 3433 CSR_WRITE(sc, WMREG_VET, ETHERTYPE_VLAN); 3434 3435 /* 3436 * Set up the transmit control register; we start out with 3437 * a collision distance suitable for FDX, but update it whe 3438 * we resolve the media type. 3439 */ 3440 sc->sc_tctl = TCTL_EN | TCTL_PSP | TCTL_RTLC 3441 | TCTL_CT(TX_COLLISION_THRESHOLD) 3442 | TCTL_COLD(TX_COLLISION_DISTANCE_FDX); 3443 if (sc->sc_type >= WM_T_82571) 3444 sc->sc_tctl |= TCTL_MULR; 3445 CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); 3446 3447 if (sc->sc_type == WM_T_80003) { 3448 reg = CSR_READ(sc, WMREG_TCTL_EXT); 3449 reg &= ~TCTL_EXT_GCEX_MASK; 3450 reg |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX; 3451 CSR_WRITE(sc, WMREG_TCTL_EXT, reg); 3452 } 3453 3454 /* Set the media. */ 3455 if ((error = mii_ifmedia_change(&sc->sc_mii)) != 0) 3456 goto out; 3457 3458 /* 3459 * Set up the receive control register; we actually program 3460 * the register when we set the receive filter. Use multicast 3461 * address offset type 0. 3462 * 3463 * Only the i82544 has the ability to strip the incoming 3464 * CRC, so we don't enable that feature. 3465 */ 3466 sc->sc_mchash_type = 0; 3467 sc->sc_rctl = RCTL_EN | RCTL_LBM_NONE | RCTL_RDMTS_1_2 | RCTL_DPF 3468 | RCTL_MO(sc->sc_mchash_type); 3469 3470 /* 82573 doesn't support jumbo frame */ 3471 if (sc->sc_type != WM_T_82573 && sc->sc_type != WM_T_82574 && 3472 sc->sc_type != WM_T_ICH8) 3473 sc->sc_rctl |= RCTL_LPE; 3474 3475 if (MCLBYTES == 2048) { 3476 sc->sc_rctl |= RCTL_2k; 3477 } else { 3478 if (sc->sc_type >= WM_T_82543) { 3479 switch(MCLBYTES) { 3480 case 4096: 3481 sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_4k; 3482 break; 3483 case 8192: 3484 sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_8k; 3485 break; 3486 case 16384: 3487 sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_16k; 3488 break; 3489 default: 3490 panic("wm_init: MCLBYTES %d unsupported", 3491 MCLBYTES); 3492 break; 3493 } 3494 } else panic("wm_init: i82542 requires MCLBYTES = 2048"); 3495 } 3496 3497 /* Set the receive filter. */ 3498 wm_set_filter(sc); 3499 3500 /* Start the one second link check clock. */ 3501 callout_reset(&sc->sc_tick_ch, hz, wm_tick, sc); 3502 3503 /* ...all done! */ 3504 ifp->if_flags |= IFF_RUNNING; 3505 ifp->if_flags &= ~IFF_OACTIVE; 3506 3507 out: 3508 if (error) 3509 log(LOG_ERR, "%s: interface not running\n", 3510 device_xname(sc->sc_dev)); 3511 return (error); 3512 } 3513 3514 /* 3515 * wm_rxdrain: 3516 * 3517 * Drain the receive queue. 3518 */ 3519 static void 3520 wm_rxdrain(struct wm_softc *sc) 3521 { 3522 struct wm_rxsoft *rxs; 3523 int i; 3524 3525 for (i = 0; i < WM_NRXDESC; i++) { 3526 rxs = &sc->sc_rxsoft[i]; 3527 if (rxs->rxs_mbuf != NULL) { 3528 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 3529 m_freem(rxs->rxs_mbuf); 3530 rxs->rxs_mbuf = NULL; 3531 } 3532 } 3533 } 3534 3535 /* 3536 * wm_stop: [ifnet interface function] 3537 * 3538 * Stop transmission on the interface. 3539 */ 3540 static void 3541 wm_stop(struct ifnet *ifp, int disable) 3542 { 3543 struct wm_softc *sc = ifp->if_softc; 3544 struct wm_txsoft *txs; 3545 int i; 3546 3547 /* Stop the one second clock. */ 3548 callout_stop(&sc->sc_tick_ch); 3549 3550 /* Stop the 82547 Tx FIFO stall check timer. */ 3551 if (sc->sc_type == WM_T_82547) 3552 callout_stop(&sc->sc_txfifo_ch); 3553 3554 if (sc->sc_flags & WM_F_HAS_MII) { 3555 /* Down the MII. */ 3556 mii_down(&sc->sc_mii); 3557 } else { 3558 #if 0 3559 /* Should we clear PHY's status properly? */ 3560 wm_reset(sc); 3561 #endif 3562 } 3563 3564 /* Stop the transmit and receive processes. */ 3565 CSR_WRITE(sc, WMREG_TCTL, 0); 3566 CSR_WRITE(sc, WMREG_RCTL, 0); 3567 3568 /* 3569 * Clear the interrupt mask to ensure the device cannot assert its 3570 * interrupt line. 3571 * Clear sc->sc_icr to ensure wm_intr() makes no attempt to service 3572 * any currently pending or shared interrupt. 3573 */ 3574 CSR_WRITE(sc, WMREG_IMC, 0xffffffffU); 3575 sc->sc_icr = 0; 3576 3577 /* Release any queued transmit buffers. */ 3578 for (i = 0; i < WM_TXQUEUELEN(sc); i++) { 3579 txs = &sc->sc_txsoft[i]; 3580 if (txs->txs_mbuf != NULL) { 3581 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 3582 m_freem(txs->txs_mbuf); 3583 txs->txs_mbuf = NULL; 3584 } 3585 } 3586 3587 /* Mark the interface as down and cancel the watchdog timer. */ 3588 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 3589 ifp->if_timer = 0; 3590 3591 if (disable) 3592 wm_rxdrain(sc); 3593 } 3594 3595 void 3596 wm_get_auto_rd_done(struct wm_softc *sc) 3597 { 3598 int i; 3599 3600 /* wait for eeprom to reload */ 3601 switch (sc->sc_type) { 3602 case WM_T_82571: 3603 case WM_T_82572: 3604 case WM_T_82573: 3605 case WM_T_82574: 3606 case WM_T_80003: 3607 case WM_T_ICH8: 3608 case WM_T_ICH9: 3609 case WM_T_ICH10: 3610 for (i = 10; i > 0; i--) { 3611 if (CSR_READ(sc, WMREG_EECD) & EECD_EE_AUTORD) 3612 break; 3613 delay(1000); 3614 } 3615 if (i == 0) { 3616 log(LOG_ERR, "%s: auto read from eeprom failed to " 3617 "complete\n", device_xname(sc->sc_dev)); 3618 } 3619 break; 3620 default: 3621 delay(5000); 3622 break; 3623 } 3624 3625 /* Phy configuration starts after EECD_AUTO_RD is set */ 3626 if (sc->sc_type == WM_T_82573 || sc->sc_type == WM_T_82574) 3627 delay(25000); 3628 } 3629 3630 /* 3631 * wm_acquire_eeprom: 3632 * 3633 * Perform the EEPROM handshake required on some chips. 3634 */ 3635 static int 3636 wm_acquire_eeprom(struct wm_softc *sc) 3637 { 3638 uint32_t reg; 3639 int x; 3640 int ret = 0; 3641 3642 /* always success */ 3643 if ((sc->sc_flags & WM_F_EEPROM_FLASH) != 0) 3644 return 0; 3645 3646 if (sc->sc_flags & WM_F_SWFWHW_SYNC) { 3647 ret = wm_get_swfwhw_semaphore(sc); 3648 } else if (sc->sc_flags & WM_F_SWFW_SYNC) { 3649 /* this will also do wm_get_swsm_semaphore() if needed */ 3650 ret = wm_get_swfw_semaphore(sc, SWFW_EEP_SM); 3651 } else if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) { 3652 ret = wm_get_swsm_semaphore(sc); 3653 } 3654 3655 if (ret) { 3656 aprint_error_dev(sc->sc_dev, "%s: failed to get semaphore\n", 3657 __func__); 3658 return 1; 3659 } 3660 3661 if (sc->sc_flags & WM_F_EEPROM_HANDSHAKE) { 3662 reg = CSR_READ(sc, WMREG_EECD); 3663 3664 /* Request EEPROM access. */ 3665 reg |= EECD_EE_REQ; 3666 CSR_WRITE(sc, WMREG_EECD, reg); 3667 3668 /* ..and wait for it to be granted. */ 3669 for (x = 0; x < 1000; x++) { 3670 reg = CSR_READ(sc, WMREG_EECD); 3671 if (reg & EECD_EE_GNT) 3672 break; 3673 delay(5); 3674 } 3675 if ((reg & EECD_EE_GNT) == 0) { 3676 aprint_error_dev(sc->sc_dev, 3677 "could not acquire EEPROM GNT\n"); 3678 reg &= ~EECD_EE_REQ; 3679 CSR_WRITE(sc, WMREG_EECD, reg); 3680 if (sc->sc_flags & WM_F_SWFWHW_SYNC) 3681 wm_put_swfwhw_semaphore(sc); 3682 if (sc->sc_flags & WM_F_SWFW_SYNC) 3683 wm_put_swfw_semaphore(sc, SWFW_EEP_SM); 3684 else if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) 3685 wm_put_swsm_semaphore(sc); 3686 return (1); 3687 } 3688 } 3689 3690 return (0); 3691 } 3692 3693 /* 3694 * wm_release_eeprom: 3695 * 3696 * Release the EEPROM mutex. 3697 */ 3698 static void 3699 wm_release_eeprom(struct wm_softc *sc) 3700 { 3701 uint32_t reg; 3702 3703 /* always success */ 3704 if ((sc->sc_flags & WM_F_EEPROM_FLASH) != 0) 3705 return; 3706 3707 if (sc->sc_flags & WM_F_EEPROM_HANDSHAKE) { 3708 reg = CSR_READ(sc, WMREG_EECD); 3709 reg &= ~EECD_EE_REQ; 3710 CSR_WRITE(sc, WMREG_EECD, reg); 3711 } 3712 3713 if (sc->sc_flags & WM_F_SWFWHW_SYNC) 3714 wm_put_swfwhw_semaphore(sc); 3715 if (sc->sc_flags & WM_F_SWFW_SYNC) 3716 wm_put_swfw_semaphore(sc, SWFW_EEP_SM); 3717 else if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) 3718 wm_put_swsm_semaphore(sc); 3719 } 3720 3721 /* 3722 * wm_eeprom_sendbits: 3723 * 3724 * Send a series of bits to the EEPROM. 3725 */ 3726 static void 3727 wm_eeprom_sendbits(struct wm_softc *sc, uint32_t bits, int nbits) 3728 { 3729 uint32_t reg; 3730 int x; 3731 3732 reg = CSR_READ(sc, WMREG_EECD); 3733 3734 for (x = nbits; x > 0; x--) { 3735 if (bits & (1U << (x - 1))) 3736 reg |= EECD_DI; 3737 else 3738 reg &= ~EECD_DI; 3739 CSR_WRITE(sc, WMREG_EECD, reg); 3740 delay(2); 3741 CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK); 3742 delay(2); 3743 CSR_WRITE(sc, WMREG_EECD, reg); 3744 delay(2); 3745 } 3746 } 3747 3748 /* 3749 * wm_eeprom_recvbits: 3750 * 3751 * Receive a series of bits from the EEPROM. 3752 */ 3753 static void 3754 wm_eeprom_recvbits(struct wm_softc *sc, uint32_t *valp, int nbits) 3755 { 3756 uint32_t reg, val; 3757 int x; 3758 3759 reg = CSR_READ(sc, WMREG_EECD) & ~EECD_DI; 3760 3761 val = 0; 3762 for (x = nbits; x > 0; x--) { 3763 CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK); 3764 delay(2); 3765 if (CSR_READ(sc, WMREG_EECD) & EECD_DO) 3766 val |= (1U << (x - 1)); 3767 CSR_WRITE(sc, WMREG_EECD, reg); 3768 delay(2); 3769 } 3770 *valp = val; 3771 } 3772 3773 /* 3774 * wm_read_eeprom_uwire: 3775 * 3776 * Read a word from the EEPROM using the MicroWire protocol. 3777 */ 3778 static int 3779 wm_read_eeprom_uwire(struct wm_softc *sc, int word, int wordcnt, uint16_t *data) 3780 { 3781 uint32_t reg, val; 3782 int i; 3783 3784 for (i = 0; i < wordcnt; i++) { 3785 /* Clear SK and DI. */ 3786 reg = CSR_READ(sc, WMREG_EECD) & ~(EECD_SK | EECD_DI); 3787 CSR_WRITE(sc, WMREG_EECD, reg); 3788 3789 /* Set CHIP SELECT. */ 3790 reg |= EECD_CS; 3791 CSR_WRITE(sc, WMREG_EECD, reg); 3792 delay(2); 3793 3794 /* Shift in the READ command. */ 3795 wm_eeprom_sendbits(sc, UWIRE_OPC_READ, 3); 3796 3797 /* Shift in address. */ 3798 wm_eeprom_sendbits(sc, word + i, sc->sc_ee_addrbits); 3799 3800 /* Shift out the data. */ 3801 wm_eeprom_recvbits(sc, &val, 16); 3802 data[i] = val & 0xffff; 3803 3804 /* Clear CHIP SELECT. */ 3805 reg = CSR_READ(sc, WMREG_EECD) & ~EECD_CS; 3806 CSR_WRITE(sc, WMREG_EECD, reg); 3807 delay(2); 3808 } 3809 3810 return (0); 3811 } 3812 3813 /* 3814 * wm_spi_eeprom_ready: 3815 * 3816 * Wait for a SPI EEPROM to be ready for commands. 3817 */ 3818 static int 3819 wm_spi_eeprom_ready(struct wm_softc *sc) 3820 { 3821 uint32_t val; 3822 int usec; 3823 3824 for (usec = 0; usec < SPI_MAX_RETRIES; delay(5), usec += 5) { 3825 wm_eeprom_sendbits(sc, SPI_OPC_RDSR, 8); 3826 wm_eeprom_recvbits(sc, &val, 8); 3827 if ((val & SPI_SR_RDY) == 0) 3828 break; 3829 } 3830 if (usec >= SPI_MAX_RETRIES) { 3831 aprint_error_dev(sc->sc_dev, "EEPROM failed to become ready\n"); 3832 return (1); 3833 } 3834 return (0); 3835 } 3836 3837 /* 3838 * wm_read_eeprom_spi: 3839 * 3840 * Read a work from the EEPROM using the SPI protocol. 3841 */ 3842 static int 3843 wm_read_eeprom_spi(struct wm_softc *sc, int word, int wordcnt, uint16_t *data) 3844 { 3845 uint32_t reg, val; 3846 int i; 3847 uint8_t opc; 3848 3849 /* Clear SK and CS. */ 3850 reg = CSR_READ(sc, WMREG_EECD) & ~(EECD_SK | EECD_CS); 3851 CSR_WRITE(sc, WMREG_EECD, reg); 3852 delay(2); 3853 3854 if (wm_spi_eeprom_ready(sc)) 3855 return (1); 3856 3857 /* Toggle CS to flush commands. */ 3858 CSR_WRITE(sc, WMREG_EECD, reg | EECD_CS); 3859 delay(2); 3860 CSR_WRITE(sc, WMREG_EECD, reg); 3861 delay(2); 3862 3863 opc = SPI_OPC_READ; 3864 if (sc->sc_ee_addrbits == 8 && word >= 128) 3865 opc |= SPI_OPC_A8; 3866 3867 wm_eeprom_sendbits(sc, opc, 8); 3868 wm_eeprom_sendbits(sc, word << 1, sc->sc_ee_addrbits); 3869 3870 for (i = 0; i < wordcnt; i++) { 3871 wm_eeprom_recvbits(sc, &val, 16); 3872 data[i] = ((val >> 8) & 0xff) | ((val & 0xff) << 8); 3873 } 3874 3875 /* Raise CS and clear SK. */ 3876 reg = (CSR_READ(sc, WMREG_EECD) & ~EECD_SK) | EECD_CS; 3877 CSR_WRITE(sc, WMREG_EECD, reg); 3878 delay(2); 3879 3880 return (0); 3881 } 3882 3883 #define EEPROM_CHECKSUM 0xBABA 3884 #define EEPROM_SIZE 0x0040 3885 3886 /* 3887 * wm_validate_eeprom_checksum 3888 * 3889 * The checksum is defined as the sum of the first 64 (16 bit) words. 3890 */ 3891 static int 3892 wm_validate_eeprom_checksum(struct wm_softc *sc) 3893 { 3894 uint16_t checksum; 3895 uint16_t eeprom_data; 3896 int i; 3897 3898 checksum = 0; 3899 3900 for (i = 0; i < EEPROM_SIZE; i++) { 3901 if (wm_read_eeprom(sc, i, 1, &eeprom_data)) 3902 return 1; 3903 checksum += eeprom_data; 3904 } 3905 3906 if (checksum != (uint16_t) EEPROM_CHECKSUM) 3907 return 1; 3908 3909 return 0; 3910 } 3911 3912 /* 3913 * wm_read_eeprom: 3914 * 3915 * Read data from the serial EEPROM. 3916 */ 3917 static int 3918 wm_read_eeprom(struct wm_softc *sc, int word, int wordcnt, uint16_t *data) 3919 { 3920 int rv; 3921 3922 if (sc->sc_flags & WM_F_EEPROM_INVALID) 3923 return 1; 3924 3925 if (wm_acquire_eeprom(sc)) 3926 return 1; 3927 3928 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 3929 || (sc->sc_type == WM_T_ICH10)) 3930 rv = wm_read_eeprom_ich8(sc, word, wordcnt, data); 3931 else if (sc->sc_flags & WM_F_EEPROM_EERDEEWR) 3932 rv = wm_read_eeprom_eerd(sc, word, wordcnt, data); 3933 else if (sc->sc_flags & WM_F_EEPROM_SPI) 3934 rv = wm_read_eeprom_spi(sc, word, wordcnt, data); 3935 else 3936 rv = wm_read_eeprom_uwire(sc, word, wordcnt, data); 3937 3938 wm_release_eeprom(sc); 3939 return rv; 3940 } 3941 3942 static int 3943 wm_read_eeprom_eerd(struct wm_softc *sc, int offset, int wordcnt, 3944 uint16_t *data) 3945 { 3946 int i, eerd = 0; 3947 int error = 0; 3948 3949 for (i = 0; i < wordcnt; i++) { 3950 eerd = ((offset + i) << EERD_ADDR_SHIFT) | EERD_START; 3951 3952 CSR_WRITE(sc, WMREG_EERD, eerd); 3953 error = wm_poll_eerd_eewr_done(sc, WMREG_EERD); 3954 if (error != 0) 3955 break; 3956 3957 data[i] = (CSR_READ(sc, WMREG_EERD) >> EERD_DATA_SHIFT); 3958 } 3959 3960 return error; 3961 } 3962 3963 static int 3964 wm_poll_eerd_eewr_done(struct wm_softc *sc, int rw) 3965 { 3966 uint32_t attempts = 100000; 3967 uint32_t i, reg = 0; 3968 int32_t done = -1; 3969 3970 for (i = 0; i < attempts; i++) { 3971 reg = CSR_READ(sc, rw); 3972 3973 if (reg & EERD_DONE) { 3974 done = 0; 3975 break; 3976 } 3977 delay(5); 3978 } 3979 3980 return done; 3981 } 3982 3983 /* 3984 * wm_add_rxbuf: 3985 * 3986 * Add a receive buffer to the indiciated descriptor. 3987 */ 3988 static int 3989 wm_add_rxbuf(struct wm_softc *sc, int idx) 3990 { 3991 struct wm_rxsoft *rxs = &sc->sc_rxsoft[idx]; 3992 struct mbuf *m; 3993 int error; 3994 3995 MGETHDR(m, M_DONTWAIT, MT_DATA); 3996 if (m == NULL) 3997 return (ENOBUFS); 3998 3999 MCLGET(m, M_DONTWAIT); 4000 if ((m->m_flags & M_EXT) == 0) { 4001 m_freem(m); 4002 return (ENOBUFS); 4003 } 4004 4005 if (rxs->rxs_mbuf != NULL) 4006 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 4007 4008 rxs->rxs_mbuf = m; 4009 4010 m->m_len = m->m_pkthdr.len = m->m_ext.ext_size; 4011 error = bus_dmamap_load_mbuf(sc->sc_dmat, rxs->rxs_dmamap, m, 4012 BUS_DMA_READ|BUS_DMA_NOWAIT); 4013 if (error) { 4014 /* XXX XXX XXX */ 4015 aprint_error_dev(sc->sc_dev, 4016 "unable to load rx DMA map %d, error = %d\n", 4017 idx, error); 4018 panic("wm_add_rxbuf"); 4019 } 4020 4021 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 4022 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 4023 4024 WM_INIT_RXDESC(sc, idx); 4025 4026 return (0); 4027 } 4028 4029 /* 4030 * wm_set_ral: 4031 * 4032 * Set an entery in the receive address list. 4033 */ 4034 static void 4035 wm_set_ral(struct wm_softc *sc, const uint8_t *enaddr, int idx) 4036 { 4037 uint32_t ral_lo, ral_hi; 4038 4039 if (enaddr != NULL) { 4040 ral_lo = enaddr[0] | (enaddr[1] << 8) | (enaddr[2] << 16) | 4041 (enaddr[3] << 24); 4042 ral_hi = enaddr[4] | (enaddr[5] << 8); 4043 ral_hi |= RAL_AV; 4044 } else { 4045 ral_lo = 0; 4046 ral_hi = 0; 4047 } 4048 4049 if (sc->sc_type >= WM_T_82544) { 4050 CSR_WRITE(sc, WMREG_RAL_LO(WMREG_CORDOVA_RAL_BASE, idx), 4051 ral_lo); 4052 CSR_WRITE(sc, WMREG_RAL_HI(WMREG_CORDOVA_RAL_BASE, idx), 4053 ral_hi); 4054 } else { 4055 CSR_WRITE(sc, WMREG_RAL_LO(WMREG_RAL_BASE, idx), ral_lo); 4056 CSR_WRITE(sc, WMREG_RAL_HI(WMREG_RAL_BASE, idx), ral_hi); 4057 } 4058 } 4059 4060 /* 4061 * wm_mchash: 4062 * 4063 * Compute the hash of the multicast address for the 4096-bit 4064 * multicast filter. 4065 */ 4066 static uint32_t 4067 wm_mchash(struct wm_softc *sc, const uint8_t *enaddr) 4068 { 4069 static const int lo_shift[4] = { 4, 3, 2, 0 }; 4070 static const int hi_shift[4] = { 4, 5, 6, 8 }; 4071 static const int ich8_lo_shift[4] = { 6, 5, 4, 2 }; 4072 static const int ich8_hi_shift[4] = { 2, 3, 4, 6 }; 4073 uint32_t hash; 4074 4075 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 4076 || (sc->sc_type == WM_T_ICH10)) { 4077 hash = (enaddr[4] >> ich8_lo_shift[sc->sc_mchash_type]) | 4078 (((uint16_t) enaddr[5]) << ich8_hi_shift[sc->sc_mchash_type]); 4079 return (hash & 0x3ff); 4080 } 4081 hash = (enaddr[4] >> lo_shift[sc->sc_mchash_type]) | 4082 (((uint16_t) enaddr[5]) << hi_shift[sc->sc_mchash_type]); 4083 4084 return (hash & 0xfff); 4085 } 4086 4087 /* 4088 * wm_set_filter: 4089 * 4090 * Set up the receive filter. 4091 */ 4092 static void 4093 wm_set_filter(struct wm_softc *sc) 4094 { 4095 struct ethercom *ec = &sc->sc_ethercom; 4096 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 4097 struct ether_multi *enm; 4098 struct ether_multistep step; 4099 bus_addr_t mta_reg; 4100 uint32_t hash, reg, bit; 4101 int i, size; 4102 4103 if (sc->sc_type >= WM_T_82544) 4104 mta_reg = WMREG_CORDOVA_MTA; 4105 else 4106 mta_reg = WMREG_MTA; 4107 4108 sc->sc_rctl &= ~(RCTL_BAM | RCTL_UPE | RCTL_MPE); 4109 4110 if (ifp->if_flags & IFF_BROADCAST) 4111 sc->sc_rctl |= RCTL_BAM; 4112 if (ifp->if_flags & IFF_PROMISC) { 4113 sc->sc_rctl |= RCTL_UPE; 4114 goto allmulti; 4115 } 4116 4117 /* 4118 * Set the station address in the first RAL slot, and 4119 * clear the remaining slots. 4120 */ 4121 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 4122 || (sc->sc_type == WM_T_ICH10)) 4123 size = WM_ICH8_RAL_TABSIZE; 4124 else 4125 size = WM_RAL_TABSIZE; 4126 wm_set_ral(sc, CLLADDR(ifp->if_sadl), 0); 4127 for (i = 1; i < size; i++) 4128 wm_set_ral(sc, NULL, i); 4129 4130 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 4131 || (sc->sc_type == WM_T_ICH10)) 4132 size = WM_ICH8_MC_TABSIZE; 4133 else 4134 size = WM_MC_TABSIZE; 4135 /* Clear out the multicast table. */ 4136 for (i = 0; i < size; i++) 4137 CSR_WRITE(sc, mta_reg + (i << 2), 0); 4138 4139 ETHER_FIRST_MULTI(step, ec, enm); 4140 while (enm != NULL) { 4141 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { 4142 /* 4143 * We must listen to a range of multicast addresses. 4144 * For now, just accept all multicasts, rather than 4145 * trying to set only those filter bits needed to match 4146 * the range. (At this time, the only use of address 4147 * ranges is for IP multicast routing, for which the 4148 * range is big enough to require all bits set.) 4149 */ 4150 goto allmulti; 4151 } 4152 4153 hash = wm_mchash(sc, enm->enm_addrlo); 4154 4155 reg = (hash >> 5); 4156 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 4157 || (sc->sc_type == WM_T_ICH10)) 4158 reg &= 0x1f; 4159 else 4160 reg &= 0x7f; 4161 bit = hash & 0x1f; 4162 4163 hash = CSR_READ(sc, mta_reg + (reg << 2)); 4164 hash |= 1U << bit; 4165 4166 /* XXX Hardware bug?? */ 4167 if (sc->sc_type == WM_T_82544 && (reg & 0xe) == 1) { 4168 bit = CSR_READ(sc, mta_reg + ((reg - 1) << 2)); 4169 CSR_WRITE(sc, mta_reg + (reg << 2), hash); 4170 CSR_WRITE(sc, mta_reg + ((reg - 1) << 2), bit); 4171 } else 4172 CSR_WRITE(sc, mta_reg + (reg << 2), hash); 4173 4174 ETHER_NEXT_MULTI(step, enm); 4175 } 4176 4177 ifp->if_flags &= ~IFF_ALLMULTI; 4178 goto setit; 4179 4180 allmulti: 4181 ifp->if_flags |= IFF_ALLMULTI; 4182 sc->sc_rctl |= RCTL_MPE; 4183 4184 setit: 4185 CSR_WRITE(sc, WMREG_RCTL, sc->sc_rctl); 4186 } 4187 4188 /* 4189 * wm_tbi_mediainit: 4190 * 4191 * Initialize media for use on 1000BASE-X devices. 4192 */ 4193 static void 4194 wm_tbi_mediainit(struct wm_softc *sc) 4195 { 4196 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 4197 const char *sep = ""; 4198 4199 if (sc->sc_type < WM_T_82543) 4200 sc->sc_tipg = TIPG_WM_DFLT; 4201 else 4202 sc->sc_tipg = TIPG_LG_DFLT; 4203 4204 sc->sc_tbi_anegticks = 5; 4205 4206 /* Initialize our media structures */ 4207 sc->sc_mii.mii_ifp = ifp; 4208 4209 sc->sc_ethercom.ec_mii = &sc->sc_mii; 4210 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_tbi_mediachange, 4211 wm_tbi_mediastatus); 4212 4213 /* 4214 * SWD Pins: 4215 * 4216 * 0 = Link LED (output) 4217 * 1 = Loss Of Signal (input) 4218 */ 4219 sc->sc_ctrl |= CTRL_SWDPIO(0); 4220 sc->sc_ctrl &= ~CTRL_SWDPIO(1); 4221 4222 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4223 4224 #define ADD(ss, mm, dd) \ 4225 do { \ 4226 aprint_normal("%s%s", sep, ss); \ 4227 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|(mm), (dd), NULL); \ 4228 sep = ", "; \ 4229 } while (/*CONSTCOND*/0) 4230 4231 aprint_normal_dev(sc->sc_dev, ""); 4232 ADD("1000baseSX", IFM_1000_SX, ANAR_X_HD); 4233 ADD("1000baseSX-FDX", IFM_1000_SX|IFM_FDX, ANAR_X_FD); 4234 ADD("auto", IFM_AUTO, ANAR_X_FD|ANAR_X_HD); 4235 aprint_normal("\n"); 4236 4237 #undef ADD 4238 4239 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 4240 } 4241 4242 /* 4243 * wm_tbi_mediastatus: [ifmedia interface function] 4244 * 4245 * Get the current interface media status on a 1000BASE-X device. 4246 */ 4247 static void 4248 wm_tbi_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 4249 { 4250 struct wm_softc *sc = ifp->if_softc; 4251 uint32_t ctrl, status; 4252 4253 ifmr->ifm_status = IFM_AVALID; 4254 ifmr->ifm_active = IFM_ETHER; 4255 4256 status = CSR_READ(sc, WMREG_STATUS); 4257 if ((status & STATUS_LU) == 0) { 4258 ifmr->ifm_active |= IFM_NONE; 4259 return; 4260 } 4261 4262 ifmr->ifm_status |= IFM_ACTIVE; 4263 ifmr->ifm_active |= IFM_1000_SX; 4264 if (CSR_READ(sc, WMREG_STATUS) & STATUS_FD) 4265 ifmr->ifm_active |= IFM_FDX; 4266 ctrl = CSR_READ(sc, WMREG_CTRL); 4267 if (ctrl & CTRL_RFCE) 4268 ifmr->ifm_active |= IFM_FLOW | IFM_ETH_RXPAUSE; 4269 if (ctrl & CTRL_TFCE) 4270 ifmr->ifm_active |= IFM_FLOW | IFM_ETH_TXPAUSE; 4271 } 4272 4273 /* 4274 * wm_tbi_mediachange: [ifmedia interface function] 4275 * 4276 * Set hardware to newly-selected media on a 1000BASE-X device. 4277 */ 4278 static int 4279 wm_tbi_mediachange(struct ifnet *ifp) 4280 { 4281 struct wm_softc *sc = ifp->if_softc; 4282 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; 4283 uint32_t status; 4284 int i; 4285 4286 sc->sc_txcw = 0; 4287 if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO || 4288 (sc->sc_mii.mii_media.ifm_media & IFM_FLOW) != 0) 4289 sc->sc_txcw |= TXCW_SYM_PAUSE | TXCW_ASYM_PAUSE; 4290 if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) { 4291 sc->sc_txcw |= TXCW_ANE; 4292 } else { 4293 /* 4294 * If autonegotiation is turned off, force link up and turn on 4295 * full duplex 4296 */ 4297 sc->sc_txcw &= ~TXCW_ANE; 4298 sc->sc_ctrl |= CTRL_SLU | CTRL_FD; 4299 sc->sc_ctrl &= ~(CTRL_TFCE | CTRL_RFCE); 4300 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4301 delay(1000); 4302 } 4303 4304 DPRINTF(WM_DEBUG_LINK,("%s: sc_txcw = 0x%x after autoneg check\n", 4305 device_xname(sc->sc_dev),sc->sc_txcw)); 4306 CSR_WRITE(sc, WMREG_TXCW, sc->sc_txcw); 4307 delay(10000); 4308 4309 i = CSR_READ(sc, WMREG_CTRL) & CTRL_SWDPIN(1); 4310 DPRINTF(WM_DEBUG_LINK,("%s: i = 0x%x\n", device_xname(sc->sc_dev),i)); 4311 4312 /* 4313 * On 82544 chips and later, the CTRL_SWDPIN(1) bit will be set if the 4314 * optics detect a signal, 0 if they don't. 4315 */ 4316 if (((i != 0) && (sc->sc_type > WM_T_82544)) || (i == 0)) { 4317 /* Have signal; wait for the link to come up. */ 4318 4319 if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) { 4320 /* 4321 * Reset the link, and let autonegotiation do its thing 4322 */ 4323 sc->sc_ctrl |= CTRL_LRST; 4324 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4325 delay(1000); 4326 sc->sc_ctrl &= ~CTRL_LRST; 4327 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4328 delay(1000); 4329 } 4330 4331 for (i = 0; i < WM_LINKUP_TIMEOUT; i++) { 4332 delay(10000); 4333 if (CSR_READ(sc, WMREG_STATUS) & STATUS_LU) 4334 break; 4335 } 4336 4337 DPRINTF(WM_DEBUG_LINK,("%s: i = %d after waiting for link\n", 4338 device_xname(sc->sc_dev),i)); 4339 4340 status = CSR_READ(sc, WMREG_STATUS); 4341 DPRINTF(WM_DEBUG_LINK, 4342 ("%s: status after final read = 0x%x, STATUS_LU = 0x%x\n", 4343 device_xname(sc->sc_dev),status, STATUS_LU)); 4344 if (status & STATUS_LU) { 4345 /* Link is up. */ 4346 DPRINTF(WM_DEBUG_LINK, 4347 ("%s: LINK: set media -> link up %s\n", 4348 device_xname(sc->sc_dev), 4349 (status & STATUS_FD) ? "FDX" : "HDX")); 4350 4351 /* 4352 * NOTE: CTRL will update TFCE and RFCE automatically, 4353 * so we should update sc->sc_ctrl 4354 */ 4355 sc->sc_ctrl = CSR_READ(sc, WMREG_CTRL); 4356 sc->sc_tctl &= ~TCTL_COLD(0x3ff); 4357 sc->sc_fcrtl &= ~FCRTL_XONE; 4358 if (status & STATUS_FD) 4359 sc->sc_tctl |= 4360 TCTL_COLD(TX_COLLISION_DISTANCE_FDX); 4361 else 4362 sc->sc_tctl |= 4363 TCTL_COLD(TX_COLLISION_DISTANCE_HDX); 4364 if (CSR_READ(sc, WMREG_CTRL) & CTRL_TFCE) 4365 sc->sc_fcrtl |= FCRTL_XONE; 4366 CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); 4367 CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? 4368 WMREG_OLD_FCRTL : WMREG_FCRTL, 4369 sc->sc_fcrtl); 4370 sc->sc_tbi_linkup = 1; 4371 } else { 4372 if (i == WM_LINKUP_TIMEOUT) 4373 wm_check_for_link(sc); 4374 /* Link is down. */ 4375 DPRINTF(WM_DEBUG_LINK, 4376 ("%s: LINK: set media -> link down\n", 4377 device_xname(sc->sc_dev))); 4378 sc->sc_tbi_linkup = 0; 4379 } 4380 } else { 4381 DPRINTF(WM_DEBUG_LINK, ("%s: LINK: set media -> no signal\n", 4382 device_xname(sc->sc_dev))); 4383 sc->sc_tbi_linkup = 0; 4384 } 4385 4386 wm_tbi_set_linkled(sc); 4387 4388 return (0); 4389 } 4390 4391 /* 4392 * wm_tbi_set_linkled: 4393 * 4394 * Update the link LED on 1000BASE-X devices. 4395 */ 4396 static void 4397 wm_tbi_set_linkled(struct wm_softc *sc) 4398 { 4399 4400 if (sc->sc_tbi_linkup) 4401 sc->sc_ctrl |= CTRL_SWDPIN(0); 4402 else 4403 sc->sc_ctrl &= ~CTRL_SWDPIN(0); 4404 4405 /* 82540 or newer devices are active low */ 4406 sc->sc_ctrl ^= (sc->sc_type >= WM_T_82540) ? CTRL_SWDPIN(0) : 0; 4407 4408 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4409 } 4410 4411 /* 4412 * wm_tbi_check_link: 4413 * 4414 * Check the link on 1000BASE-X devices. 4415 */ 4416 static void 4417 wm_tbi_check_link(struct wm_softc *sc) 4418 { 4419 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 4420 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; 4421 uint32_t rxcw, ctrl, status; 4422 4423 status = CSR_READ(sc, WMREG_STATUS); 4424 4425 rxcw = CSR_READ(sc, WMREG_RXCW); 4426 ctrl = CSR_READ(sc, WMREG_CTRL); 4427 4428 /* set link status */ 4429 if ((status & STATUS_LU) == 0) { 4430 DPRINTF(WM_DEBUG_LINK, 4431 ("%s: LINK: checklink -> down\n", device_xname(sc->sc_dev))); 4432 sc->sc_tbi_linkup = 0; 4433 } else if (sc->sc_tbi_linkup == 0) { 4434 DPRINTF(WM_DEBUG_LINK, 4435 ("%s: LINK: checklink -> up %s\n", device_xname(sc->sc_dev), 4436 (status & STATUS_FD) ? "FDX" : "HDX")); 4437 sc->sc_tbi_linkup = 1; 4438 } 4439 4440 if ((sc->sc_ethercom.ec_if.if_flags & IFF_UP) 4441 && ((status & STATUS_LU) == 0)) { 4442 sc->sc_tbi_linkup = 0; 4443 if (sc->sc_tbi_nrxcfg - sc->sc_tbi_lastnrxcfg > 100) { 4444 /* RXCFG storm! */ 4445 DPRINTF(WM_DEBUG_LINK, ("RXCFG storm! (%d)\n", 4446 sc->sc_tbi_nrxcfg - sc->sc_tbi_lastnrxcfg)); 4447 wm_init(ifp); 4448 wm_start(ifp); 4449 } else if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) { 4450 /* If the timer expired, retry autonegotiation */ 4451 if (++sc->sc_tbi_ticks >= sc->sc_tbi_anegticks) { 4452 DPRINTF(WM_DEBUG_LINK, ("EXPIRE\n")); 4453 sc->sc_tbi_ticks = 0; 4454 /* 4455 * Reset the link, and let autonegotiation do 4456 * its thing 4457 */ 4458 sc->sc_ctrl |= CTRL_LRST; 4459 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4460 delay(1000); 4461 sc->sc_ctrl &= ~CTRL_LRST; 4462 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4463 delay(1000); 4464 CSR_WRITE(sc, WMREG_TXCW, 4465 sc->sc_txcw & ~TXCW_ANE); 4466 CSR_WRITE(sc, WMREG_TXCW, sc->sc_txcw); 4467 } 4468 } 4469 } 4470 4471 wm_tbi_set_linkled(sc); 4472 } 4473 4474 /* 4475 * wm_gmii_reset: 4476 * 4477 * Reset the PHY. 4478 */ 4479 static void 4480 wm_gmii_reset(struct wm_softc *sc) 4481 { 4482 uint32_t reg; 4483 int func = 0; /* XXX gcc */ 4484 4485 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 4486 || (sc->sc_type == WM_T_ICH10)) { 4487 if (wm_get_swfwhw_semaphore(sc)) { 4488 aprint_error_dev(sc->sc_dev, 4489 "%s: failed to get semaphore\n", __func__); 4490 return; 4491 } 4492 } 4493 if (sc->sc_type == WM_T_80003) { 4494 func = (CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1; 4495 if (wm_get_swfw_semaphore(sc, 4496 func ? SWFW_PHY1_SM : SWFW_PHY0_SM)) { 4497 aprint_error_dev(sc->sc_dev, 4498 "%s: failed to get semaphore\n", __func__); 4499 return; 4500 } 4501 } 4502 if (sc->sc_type >= WM_T_82544) { 4503 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl | CTRL_PHY_RESET); 4504 delay(20000); 4505 4506 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4507 delay(20000); 4508 } else { 4509 /* 4510 * With 82543, we need to force speed and duplex on the MAC 4511 * equal to what the PHY speed and duplex configuration is. 4512 * In addition, we need to perform a hardware reset on the PHY 4513 * to take it out of reset. 4514 */ 4515 sc->sc_ctrl |= CTRL_FRCSPD | CTRL_FRCFDX; 4516 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4517 4518 /* The PHY reset pin is active-low. */ 4519 reg = CSR_READ(sc, WMREG_CTRL_EXT); 4520 reg &= ~((CTRL_EXT_SWDPIO_MASK << CTRL_EXT_SWDPIO_SHIFT) | 4521 CTRL_EXT_SWDPIN(4)); 4522 reg |= CTRL_EXT_SWDPIO(4); 4523 4524 CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_SWDPIN(4)); 4525 delay(10); 4526 4527 CSR_WRITE(sc, WMREG_CTRL_EXT, reg); 4528 delay(10000); 4529 4530 CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_SWDPIN(4)); 4531 delay(10); 4532 #if 0 4533 sc->sc_ctrl_ext = reg | CTRL_EXT_SWDPIN(4); 4534 #endif 4535 } 4536 if ((sc->sc_type == WM_T_ICH8) || (sc->sc_type == WM_T_ICH9) 4537 || (sc->sc_type == WM_T_ICH10)) 4538 wm_put_swfwhw_semaphore(sc); 4539 if (sc->sc_type == WM_T_80003) 4540 wm_put_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM); 4541 } 4542 4543 /* 4544 * wm_gmii_mediainit: 4545 * 4546 * Initialize media for use on 1000BASE-T devices. 4547 */ 4548 static void 4549 wm_gmii_mediainit(struct wm_softc *sc) 4550 { 4551 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 4552 4553 /* We have MII. */ 4554 sc->sc_flags |= WM_F_HAS_MII; 4555 4556 if (sc->sc_type == WM_T_80003) 4557 sc->sc_tipg = TIPG_1000T_80003_DFLT; 4558 else 4559 sc->sc_tipg = TIPG_1000T_DFLT; 4560 4561 /* 4562 * Let the chip set speed/duplex on its own based on 4563 * signals from the PHY. 4564 * XXXbouyer - I'm not sure this is right for the 80003, 4565 * the em driver only sets CTRL_SLU here - but it seems to work. 4566 */ 4567 sc->sc_ctrl |= CTRL_SLU; 4568 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4569 4570 /* Initialize our media structures and probe the GMII. */ 4571 sc->sc_mii.mii_ifp = ifp; 4572 4573 if (sc->sc_type == WM_T_ICH10) { 4574 sc->sc_mii.mii_readreg = wm_gmii_bm_readreg; 4575 sc->sc_mii.mii_writereg = wm_gmii_bm_writereg; 4576 } else if (sc->sc_type >= WM_T_80003) { 4577 sc->sc_mii.mii_readreg = wm_gmii_i80003_readreg; 4578 sc->sc_mii.mii_writereg = wm_gmii_i80003_writereg; 4579 } else if (sc->sc_type >= WM_T_82544) { 4580 sc->sc_mii.mii_readreg = wm_gmii_i82544_readreg; 4581 sc->sc_mii.mii_writereg = wm_gmii_i82544_writereg; 4582 } else { 4583 sc->sc_mii.mii_readreg = wm_gmii_i82543_readreg; 4584 sc->sc_mii.mii_writereg = wm_gmii_i82543_writereg; 4585 } 4586 sc->sc_mii.mii_statchg = wm_gmii_statchg; 4587 4588 wm_gmii_reset(sc); 4589 4590 sc->sc_ethercom.ec_mii = &sc->sc_mii; 4591 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_gmii_mediachange, 4592 wm_gmii_mediastatus); 4593 4594 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, 4595 MII_OFFSET_ANY, MIIF_DOPAUSE); 4596 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { 4597 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 4598 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); 4599 } else 4600 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 4601 } 4602 4603 /* 4604 * wm_gmii_mediastatus: [ifmedia interface function] 4605 * 4606 * Get the current interface media status on a 1000BASE-T device. 4607 */ 4608 static void 4609 wm_gmii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 4610 { 4611 struct wm_softc *sc = ifp->if_softc; 4612 4613 ether_mediastatus(ifp, ifmr); 4614 ifmr->ifm_active = (ifmr->ifm_active & ~IFM_ETH_FMASK) | 4615 sc->sc_flowflags; 4616 } 4617 4618 /* 4619 * wm_gmii_mediachange: [ifmedia interface function] 4620 * 4621 * Set hardware to newly-selected media on a 1000BASE-T device. 4622 */ 4623 static int 4624 wm_gmii_mediachange(struct ifnet *ifp) 4625 { 4626 struct wm_softc *sc = ifp->if_softc; 4627 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; 4628 int rc; 4629 4630 if ((ifp->if_flags & IFF_UP) == 0) 4631 return 0; 4632 4633 sc->sc_ctrl &= ~(CTRL_SPEED_MASK | CTRL_FD); 4634 sc->sc_ctrl |= CTRL_SLU; 4635 if ((IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) 4636 || (sc->sc_type > WM_T_82543)) { 4637 sc->sc_ctrl &= ~(CTRL_FRCSPD | CTRL_FRCFDX); 4638 } else { 4639 sc->sc_ctrl &= ~CTRL_ASDE; 4640 sc->sc_ctrl |= CTRL_FRCSPD | CTRL_FRCFDX; 4641 if (ife->ifm_media & IFM_FDX) 4642 sc->sc_ctrl |= CTRL_FD; 4643 switch(IFM_SUBTYPE(ife->ifm_media)) { 4644 case IFM_10_T: 4645 sc->sc_ctrl |= CTRL_SPEED_10; 4646 break; 4647 case IFM_100_TX: 4648 sc->sc_ctrl |= CTRL_SPEED_100; 4649 break; 4650 case IFM_1000_T: 4651 sc->sc_ctrl |= CTRL_SPEED_1000; 4652 break; 4653 default: 4654 panic("wm_gmii_mediachange: bad media 0x%x", 4655 ife->ifm_media); 4656 } 4657 } 4658 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 4659 if (sc->sc_type <= WM_T_82543) 4660 wm_gmii_reset(sc); 4661 4662 if ((rc = mii_mediachg(&sc->sc_mii)) == ENXIO) 4663 return 0; 4664 return rc; 4665 } 4666 4667 #define MDI_IO CTRL_SWDPIN(2) 4668 #define MDI_DIR CTRL_SWDPIO(2) /* host -> PHY */ 4669 #define MDI_CLK CTRL_SWDPIN(3) 4670 4671 static void 4672 i82543_mii_sendbits(struct wm_softc *sc, uint32_t data, int nbits) 4673 { 4674 uint32_t i, v; 4675 4676 v = CSR_READ(sc, WMREG_CTRL); 4677 v &= ~(MDI_IO|MDI_CLK|(CTRL_SWDPIO_MASK << CTRL_SWDPIO_SHIFT)); 4678 v |= MDI_DIR | CTRL_SWDPIO(3); 4679 4680 for (i = 1 << (nbits - 1); i != 0; i >>= 1) { 4681 if (data & i) 4682 v |= MDI_IO; 4683 else 4684 v &= ~MDI_IO; 4685 CSR_WRITE(sc, WMREG_CTRL, v); 4686 delay(10); 4687 CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); 4688 delay(10); 4689 CSR_WRITE(sc, WMREG_CTRL, v); 4690 delay(10); 4691 } 4692 } 4693 4694 static uint32_t 4695 i82543_mii_recvbits(struct wm_softc *sc) 4696 { 4697 uint32_t v, i, data = 0; 4698 4699 v = CSR_READ(sc, WMREG_CTRL); 4700 v &= ~(MDI_IO|MDI_CLK|(CTRL_SWDPIO_MASK << CTRL_SWDPIO_SHIFT)); 4701 v |= CTRL_SWDPIO(3); 4702 4703 CSR_WRITE(sc, WMREG_CTRL, v); 4704 delay(10); 4705 CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); 4706 delay(10); 4707 CSR_WRITE(sc, WMREG_CTRL, v); 4708 delay(10); 4709 4710 for (i = 0; i < 16; i++) { 4711 data <<= 1; 4712 CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); 4713 delay(10); 4714 if (CSR_READ(sc, WMREG_CTRL) & MDI_IO) 4715 data |= 1; 4716 CSR_WRITE(sc, WMREG_CTRL, v); 4717 delay(10); 4718 } 4719 4720 CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); 4721 delay(10); 4722 CSR_WRITE(sc, WMREG_CTRL, v); 4723 delay(10); 4724 4725 return (data); 4726 } 4727 4728 #undef MDI_IO 4729 #undef MDI_DIR 4730 #undef MDI_CLK 4731 4732 /* 4733 * wm_gmii_i82543_readreg: [mii interface function] 4734 * 4735 * Read a PHY register on the GMII (i82543 version). 4736 */ 4737 static int 4738 wm_gmii_i82543_readreg(device_t self, int phy, int reg) 4739 { 4740 struct wm_softc *sc = device_private(self); 4741 int rv; 4742 4743 i82543_mii_sendbits(sc, 0xffffffffU, 32); 4744 i82543_mii_sendbits(sc, reg | (phy << 5) | 4745 (MII_COMMAND_READ << 10) | (MII_COMMAND_START << 12), 14); 4746 rv = i82543_mii_recvbits(sc) & 0xffff; 4747 4748 DPRINTF(WM_DEBUG_GMII, 4749 ("%s: GMII: read phy %d reg %d -> 0x%04x\n", 4750 device_xname(sc->sc_dev), phy, reg, rv)); 4751 4752 return (rv); 4753 } 4754 4755 /* 4756 * wm_gmii_i82543_writereg: [mii interface function] 4757 * 4758 * Write a PHY register on the GMII (i82543 version). 4759 */ 4760 static void 4761 wm_gmii_i82543_writereg(device_t self, int phy, int reg, int val) 4762 { 4763 struct wm_softc *sc = device_private(self); 4764 4765 i82543_mii_sendbits(sc, 0xffffffffU, 32); 4766 i82543_mii_sendbits(sc, val | (MII_COMMAND_ACK << 16) | 4767 (reg << 18) | (phy << 23) | (MII_COMMAND_WRITE << 28) | 4768 (MII_COMMAND_START << 30), 32); 4769 } 4770 4771 /* 4772 * wm_gmii_i82544_readreg: [mii interface function] 4773 * 4774 * Read a PHY register on the GMII. 4775 */ 4776 static int 4777 wm_gmii_i82544_readreg(device_t self, int phy, int reg) 4778 { 4779 struct wm_softc *sc = device_private(self); 4780 uint32_t mdic = 0; 4781 int i, rv; 4782 4783 CSR_WRITE(sc, WMREG_MDIC, MDIC_OP_READ | MDIC_PHYADD(phy) | 4784 MDIC_REGADD(reg)); 4785 4786 for (i = 0; i < 320; i++) { 4787 mdic = CSR_READ(sc, WMREG_MDIC); 4788 if (mdic & MDIC_READY) 4789 break; 4790 delay(10); 4791 } 4792 4793 if ((mdic & MDIC_READY) == 0) { 4794 log(LOG_WARNING, "%s: MDIC read timed out: phy %d reg %d\n", 4795 device_xname(sc->sc_dev), phy, reg); 4796 rv = 0; 4797 } else if (mdic & MDIC_E) { 4798 #if 0 /* This is normal if no PHY is present. */ 4799 log(LOG_WARNING, "%s: MDIC read error: phy %d reg %d\n", 4800 device_xname(sc->sc_dev), phy, reg); 4801 #endif 4802 rv = 0; 4803 } else { 4804 rv = MDIC_DATA(mdic); 4805 if (rv == 0xffff) 4806 rv = 0; 4807 } 4808 4809 return (rv); 4810 } 4811 4812 /* 4813 * wm_gmii_i82544_writereg: [mii interface function] 4814 * 4815 * Write a PHY register on the GMII. 4816 */ 4817 static void 4818 wm_gmii_i82544_writereg(device_t self, int phy, int reg, int val) 4819 { 4820 struct wm_softc *sc = device_private(self); 4821 uint32_t mdic = 0; 4822 int i; 4823 4824 CSR_WRITE(sc, WMREG_MDIC, MDIC_OP_WRITE | MDIC_PHYADD(phy) | 4825 MDIC_REGADD(reg) | MDIC_DATA(val)); 4826 4827 for (i = 0; i < 320; i++) { 4828 mdic = CSR_READ(sc, WMREG_MDIC); 4829 if (mdic & MDIC_READY) 4830 break; 4831 delay(10); 4832 } 4833 4834 if ((mdic & MDIC_READY) == 0) 4835 log(LOG_WARNING, "%s: MDIC write timed out: phy %d reg %d\n", 4836 device_xname(sc->sc_dev), phy, reg); 4837 else if (mdic & MDIC_E) 4838 log(LOG_WARNING, "%s: MDIC write error: phy %d reg %d\n", 4839 device_xname(sc->sc_dev), phy, reg); 4840 } 4841 4842 /* 4843 * wm_gmii_i80003_readreg: [mii interface function] 4844 * 4845 * Read a PHY register on the kumeran 4846 * This could be handled by the PHY layer if we didn't have to lock the 4847 * ressource ... 4848 */ 4849 static int 4850 wm_gmii_i80003_readreg(device_t self, int phy, int reg) 4851 { 4852 struct wm_softc *sc = device_private(self); 4853 int func = ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1); 4854 int rv; 4855 4856 if (phy != 1) /* only one PHY on kumeran bus */ 4857 return 0; 4858 4859 if (wm_get_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM)) { 4860 aprint_error_dev(sc->sc_dev, "%s: failed to get semaphore\n", 4861 __func__); 4862 return 0; 4863 } 4864 4865 if ((reg & GG82563_MAX_REG_ADDRESS) < GG82563_MIN_ALT_REG) { 4866 wm_gmii_i82544_writereg(self, phy, GG82563_PHY_PAGE_SELECT, 4867 reg >> GG82563_PAGE_SHIFT); 4868 } else { 4869 wm_gmii_i82544_writereg(self, phy, GG82563_PHY_PAGE_SELECT_ALT, 4870 reg >> GG82563_PAGE_SHIFT); 4871 } 4872 /* Wait more 200us for a bug of the ready bit in the MDIC register */ 4873 delay(200); 4874 rv = wm_gmii_i82544_readreg(self, phy, reg & GG82563_MAX_REG_ADDRESS); 4875 delay(200); 4876 4877 wm_put_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM); 4878 return (rv); 4879 } 4880 4881 /* 4882 * wm_gmii_i80003_writereg: [mii interface function] 4883 * 4884 * Write a PHY register on the kumeran. 4885 * This could be handled by the PHY layer if we didn't have to lock the 4886 * ressource ... 4887 */ 4888 static void 4889 wm_gmii_i80003_writereg(device_t self, int phy, int reg, int val) 4890 { 4891 struct wm_softc *sc = device_private(self); 4892 int func = ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1); 4893 4894 if (phy != 1) /* only one PHY on kumeran bus */ 4895 return; 4896 4897 if (wm_get_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM)) { 4898 aprint_error_dev(sc->sc_dev, "%s: failed to get semaphore\n", 4899 __func__); 4900 return; 4901 } 4902 4903 if ((reg & GG82563_MAX_REG_ADDRESS) < GG82563_MIN_ALT_REG) { 4904 wm_gmii_i82544_writereg(self, phy, GG82563_PHY_PAGE_SELECT, 4905 reg >> GG82563_PAGE_SHIFT); 4906 } else { 4907 wm_gmii_i82544_writereg(self, phy, GG82563_PHY_PAGE_SELECT_ALT, 4908 reg >> GG82563_PAGE_SHIFT); 4909 } 4910 /* Wait more 200us for a bug of the ready bit in the MDIC register */ 4911 delay(200); 4912 wm_gmii_i82544_writereg(self, phy, reg & GG82563_MAX_REG_ADDRESS, val); 4913 delay(200); 4914 4915 wm_put_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM); 4916 } 4917 4918 /* 4919 * wm_gmii_bm_readreg: [mii interface function] 4920 * 4921 * Read a PHY register on the kumeran 4922 * This could be handled by the PHY layer if we didn't have to lock the 4923 * ressource ... 4924 */ 4925 static int 4926 wm_gmii_bm_readreg(device_t self, int phy, int reg) 4927 { 4928 struct wm_softc *sc = device_private(self); 4929 int func = ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1); 4930 int rv; 4931 4932 if (wm_get_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM)) { 4933 aprint_error_dev(sc->sc_dev, "%s: failed to get semaphore\n", 4934 __func__); 4935 return 0; 4936 } 4937 4938 if (reg > GG82563_MAX_REG_ADDRESS) { 4939 if (phy == 1) 4940 wm_gmii_i82544_writereg(self, phy, 0x1f, 4941 reg); 4942 else 4943 wm_gmii_i82544_writereg(self, phy, GG82563_PHY_PAGE_SELECT, 4944 reg >> GG82563_PAGE_SHIFT); 4945 4946 } 4947 4948 rv = wm_gmii_i82544_readreg(self, phy, reg & GG82563_MAX_REG_ADDRESS); 4949 wm_put_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM); 4950 return (rv); 4951 } 4952 4953 /* 4954 * wm_gmii_bm_writereg: [mii interface function] 4955 * 4956 * Write a PHY register on the kumeran. 4957 * This could be handled by the PHY layer if we didn't have to lock the 4958 * ressource ... 4959 */ 4960 static void 4961 wm_gmii_bm_writereg(device_t self, int phy, int reg, int val) 4962 { 4963 struct wm_softc *sc = device_private(self); 4964 int func = ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1); 4965 4966 if (wm_get_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM)) { 4967 aprint_error_dev(sc->sc_dev, "%s: failed to get semaphore\n", 4968 __func__); 4969 return; 4970 } 4971 4972 if (reg > GG82563_MAX_REG_ADDRESS) { 4973 if (phy == 1) 4974 wm_gmii_i82544_writereg(self, phy, 0x1f, 4975 reg); 4976 else 4977 wm_gmii_i82544_writereg(self, phy, GG82563_PHY_PAGE_SELECT, 4978 reg >> GG82563_PAGE_SHIFT); 4979 4980 } 4981 4982 wm_gmii_i82544_writereg(self, phy, reg & GG82563_MAX_REG_ADDRESS, val); 4983 wm_put_swfw_semaphore(sc, func ? SWFW_PHY1_SM : SWFW_PHY0_SM); 4984 } 4985 4986 /* 4987 * wm_gmii_statchg: [mii interface function] 4988 * 4989 * Callback from MII layer when media changes. 4990 */ 4991 static void 4992 wm_gmii_statchg(device_t self) 4993 { 4994 struct wm_softc *sc = device_private(self); 4995 struct mii_data *mii = &sc->sc_mii; 4996 4997 sc->sc_ctrl &= ~(CTRL_TFCE | CTRL_RFCE); 4998 sc->sc_tctl &= ~TCTL_COLD(0x3ff); 4999 sc->sc_fcrtl &= ~FCRTL_XONE; 5000 5001 /* 5002 * Get flow control negotiation result. 5003 */ 5004 if (IFM_SUBTYPE(mii->mii_media.ifm_cur->ifm_media) == IFM_AUTO && 5005 (mii->mii_media_active & IFM_ETH_FMASK) != sc->sc_flowflags) { 5006 sc->sc_flowflags = mii->mii_media_active & IFM_ETH_FMASK; 5007 mii->mii_media_active &= ~IFM_ETH_FMASK; 5008 } 5009 5010 if (sc->sc_flowflags & IFM_FLOW) { 5011 if (sc->sc_flowflags & IFM_ETH_TXPAUSE) { 5012 sc->sc_ctrl |= CTRL_TFCE; 5013 sc->sc_fcrtl |= FCRTL_XONE; 5014 } 5015 if (sc->sc_flowflags & IFM_ETH_RXPAUSE) 5016 sc->sc_ctrl |= CTRL_RFCE; 5017 } 5018 5019 if (sc->sc_mii.mii_media_active & IFM_FDX) { 5020 DPRINTF(WM_DEBUG_LINK, 5021 ("%s: LINK: statchg: FDX\n", device_xname(sc->sc_dev))); 5022 sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_FDX); 5023 } else { 5024 DPRINTF(WM_DEBUG_LINK, 5025 ("%s: LINK: statchg: HDX\n", device_xname(sc->sc_dev))); 5026 sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_HDX); 5027 } 5028 5029 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 5030 CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); 5031 CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? WMREG_OLD_FCRTL 5032 : WMREG_FCRTL, sc->sc_fcrtl); 5033 if (sc->sc_type == WM_T_80003) { 5034 switch(IFM_SUBTYPE(sc->sc_mii.mii_media_active)) { 5035 case IFM_1000_T: 5036 wm_kmrn_writereg(sc, KUMCTRLSTA_OFFSET_HD_CTRL, 5037 KUMCTRLSTA_HD_CTRL_1000_DEFAULT); 5038 sc->sc_tipg = TIPG_1000T_80003_DFLT; 5039 break; 5040 default: 5041 wm_kmrn_writereg(sc, KUMCTRLSTA_OFFSET_HD_CTRL, 5042 KUMCTRLSTA_HD_CTRL_10_100_DEFAULT); 5043 sc->sc_tipg = TIPG_10_100_80003_DFLT; 5044 break; 5045 } 5046 CSR_WRITE(sc, WMREG_TIPG, sc->sc_tipg); 5047 } 5048 } 5049 5050 /* 5051 * wm_kmrn_readreg: 5052 * 5053 * Read a kumeran register 5054 */ 5055 static int 5056 wm_kmrn_readreg(struct wm_softc *sc, int reg) 5057 { 5058 int rv; 5059 5060 if (sc->sc_flags == WM_F_SWFW_SYNC) { 5061 if (wm_get_swfw_semaphore(sc, SWFW_MAC_CSR_SM)) { 5062 aprint_error_dev(sc->sc_dev, 5063 "%s: failed to get semaphore\n", __func__); 5064 return 0; 5065 } 5066 } else if (sc->sc_flags == WM_F_SWFWHW_SYNC) { 5067 if (wm_get_swfwhw_semaphore(sc)) { 5068 aprint_error_dev(sc->sc_dev, 5069 "%s: failed to get semaphore\n", __func__); 5070 return 0; 5071 } 5072 } 5073 5074 CSR_WRITE(sc, WMREG_KUMCTRLSTA, 5075 ((reg << KUMCTRLSTA_OFFSET_SHIFT) & KUMCTRLSTA_OFFSET) | 5076 KUMCTRLSTA_REN); 5077 delay(2); 5078 5079 rv = CSR_READ(sc, WMREG_KUMCTRLSTA) & KUMCTRLSTA_MASK; 5080 5081 if (sc->sc_flags == WM_F_SWFW_SYNC) 5082 wm_put_swfw_semaphore(sc, SWFW_MAC_CSR_SM); 5083 else if (sc->sc_flags == WM_F_SWFWHW_SYNC) 5084 wm_put_swfwhw_semaphore(sc); 5085 5086 return (rv); 5087 } 5088 5089 /* 5090 * wm_kmrn_writereg: 5091 * 5092 * Write a kumeran register 5093 */ 5094 static void 5095 wm_kmrn_writereg(struct wm_softc *sc, int reg, int val) 5096 { 5097 5098 if (sc->sc_flags == WM_F_SWFW_SYNC) { 5099 if (wm_get_swfw_semaphore(sc, SWFW_MAC_CSR_SM)) { 5100 aprint_error_dev(sc->sc_dev, 5101 "%s: failed to get semaphore\n", __func__); 5102 return; 5103 } 5104 } else if (sc->sc_flags == WM_F_SWFWHW_SYNC) { 5105 if (wm_get_swfwhw_semaphore(sc)) { 5106 aprint_error_dev(sc->sc_dev, 5107 "%s: failed to get semaphore\n", __func__); 5108 return; 5109 } 5110 } 5111 5112 CSR_WRITE(sc, WMREG_KUMCTRLSTA, 5113 ((reg << KUMCTRLSTA_OFFSET_SHIFT) & KUMCTRLSTA_OFFSET) | 5114 (val & KUMCTRLSTA_MASK)); 5115 5116 if (sc->sc_flags == WM_F_SWFW_SYNC) 5117 wm_put_swfw_semaphore(sc, SWFW_MAC_CSR_SM); 5118 else if (sc->sc_flags == WM_F_SWFWHW_SYNC) 5119 wm_put_swfwhw_semaphore(sc); 5120 } 5121 5122 static int 5123 wm_is_onboard_nvm_eeprom(struct wm_softc *sc) 5124 { 5125 uint32_t eecd = 0; 5126 5127 if (sc->sc_type == WM_T_82573 || sc->sc_type == WM_T_82574) { 5128 eecd = CSR_READ(sc, WMREG_EECD); 5129 5130 /* Isolate bits 15 & 16 */ 5131 eecd = ((eecd >> 15) & 0x03); 5132 5133 /* If both bits are set, device is Flash type */ 5134 if (eecd == 0x03) { 5135 return 0; 5136 } 5137 } 5138 return 1; 5139 } 5140 5141 static int 5142 wm_get_swsm_semaphore(struct wm_softc *sc) 5143 { 5144 int32_t timeout; 5145 uint32_t swsm; 5146 5147 /* Get the FW semaphore. */ 5148 timeout = 1000 + 1; /* XXX */ 5149 while (timeout) { 5150 swsm = CSR_READ(sc, WMREG_SWSM); 5151 swsm |= SWSM_SWESMBI; 5152 CSR_WRITE(sc, WMREG_SWSM, swsm); 5153 /* if we managed to set the bit we got the semaphore. */ 5154 swsm = CSR_READ(sc, WMREG_SWSM); 5155 if (swsm & SWSM_SWESMBI) 5156 break; 5157 5158 delay(50); 5159 timeout--; 5160 } 5161 5162 if (timeout == 0) { 5163 aprint_error_dev(sc->sc_dev, "could not acquire EEPROM GNT\n"); 5164 /* Release semaphores */ 5165 wm_put_swsm_semaphore(sc); 5166 return 1; 5167 } 5168 return 0; 5169 } 5170 5171 static void 5172 wm_put_swsm_semaphore(struct wm_softc *sc) 5173 { 5174 uint32_t swsm; 5175 5176 swsm = CSR_READ(sc, WMREG_SWSM); 5177 swsm &= ~(SWSM_SWESMBI); 5178 CSR_WRITE(sc, WMREG_SWSM, swsm); 5179 } 5180 5181 static int 5182 wm_get_swfw_semaphore(struct wm_softc *sc, uint16_t mask) 5183 { 5184 uint32_t swfw_sync; 5185 uint32_t swmask = mask << SWFW_SOFT_SHIFT; 5186 uint32_t fwmask = mask << SWFW_FIRM_SHIFT; 5187 int timeout = 200; 5188 5189 for(timeout = 0; timeout < 200; timeout++) { 5190 if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) { 5191 if (wm_get_swsm_semaphore(sc)) { 5192 aprint_error_dev(sc->sc_dev, 5193 "%s: failed to get semaphore\n", 5194 __func__); 5195 return 1; 5196 } 5197 } 5198 swfw_sync = CSR_READ(sc, WMREG_SW_FW_SYNC); 5199 if ((swfw_sync & (swmask | fwmask)) == 0) { 5200 swfw_sync |= swmask; 5201 CSR_WRITE(sc, WMREG_SW_FW_SYNC, swfw_sync); 5202 if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) 5203 wm_put_swsm_semaphore(sc); 5204 return 0; 5205 } 5206 if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) 5207 wm_put_swsm_semaphore(sc); 5208 delay(5000); 5209 } 5210 printf("%s: failed to get swfw semaphore mask 0x%x swfw 0x%x\n", 5211 device_xname(sc->sc_dev), mask, swfw_sync); 5212 return 1; 5213 } 5214 5215 static void 5216 wm_put_swfw_semaphore(struct wm_softc *sc, uint16_t mask) 5217 { 5218 uint32_t swfw_sync; 5219 5220 if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) { 5221 while (wm_get_swsm_semaphore(sc) != 0) 5222 continue; 5223 } 5224 swfw_sync = CSR_READ(sc, WMREG_SW_FW_SYNC); 5225 swfw_sync &= ~(mask << SWFW_SOFT_SHIFT); 5226 CSR_WRITE(sc, WMREG_SW_FW_SYNC, swfw_sync); 5227 if (sc->sc_flags & WM_F_EEPROM_SEMAPHORE) 5228 wm_put_swsm_semaphore(sc); 5229 } 5230 5231 static int 5232 wm_get_swfwhw_semaphore(struct wm_softc *sc) 5233 { 5234 uint32_t ext_ctrl; 5235 int timeout = 200; 5236 5237 for(timeout = 0; timeout < 200; timeout++) { 5238 ext_ctrl = CSR_READ(sc, WMREG_EXTCNFCTR); 5239 ext_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; 5240 CSR_WRITE(sc, WMREG_EXTCNFCTR, ext_ctrl); 5241 5242 ext_ctrl = CSR_READ(sc, WMREG_EXTCNFCTR); 5243 if (ext_ctrl & E1000_EXTCNF_CTRL_SWFLAG) 5244 return 0; 5245 delay(5000); 5246 } 5247 printf("%s: failed to get swfwhw semaphore ext_ctrl 0x%x\n", 5248 device_xname(sc->sc_dev), ext_ctrl); 5249 return 1; 5250 } 5251 5252 static void 5253 wm_put_swfwhw_semaphore(struct wm_softc *sc) 5254 { 5255 uint32_t ext_ctrl; 5256 ext_ctrl = CSR_READ(sc, WMREG_EXTCNFCTR); 5257 ext_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; 5258 CSR_WRITE(sc, WMREG_EXTCNFCTR, ext_ctrl); 5259 } 5260 5261 static int 5262 wm_valid_nvm_bank_detect_ich8lan(struct wm_softc *sc, unsigned int *bank) 5263 { 5264 uint32_t act_offset = ICH_NVM_SIG_WORD * 2 + 1; 5265 uint8_t bank_high_byte; 5266 uint32_t bank1_offset = sc->sc_ich8_flash_bank_size * sizeof(uint16_t); 5267 5268 if (sc->sc_type != WM_T_ICH10) { 5269 /* Value of bit 22 corresponds to the flash bank we're on. */ 5270 *bank = (CSR_READ(sc, WMREG_EECD) & EECD_SEC1VAL) ? 1 : 0; 5271 } else { 5272 wm_read_ich8_byte(sc, act_offset, &bank_high_byte); 5273 if ((bank_high_byte & 0xc0) == 0x80) 5274 *bank = 0; 5275 else { 5276 wm_read_ich8_byte(sc, act_offset + bank1_offset, 5277 &bank_high_byte); 5278 if ((bank_high_byte & 0xc0) == 0x80) 5279 *bank = 1; 5280 else { 5281 aprint_error_dev(sc->sc_dev, 5282 "EEPROM not present\n"); 5283 return -1; 5284 } 5285 } 5286 } 5287 5288 return 0; 5289 } 5290 5291 /****************************************************************************** 5292 * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access 5293 * register. 5294 * 5295 * sc - Struct containing variables accessed by shared code 5296 * offset - offset of word in the EEPROM to read 5297 * data - word read from the EEPROM 5298 * words - number of words to read 5299 *****************************************************************************/ 5300 static int 5301 wm_read_eeprom_ich8(struct wm_softc *sc, int offset, int words, uint16_t *data) 5302 { 5303 int32_t error = 0; 5304 uint32_t flash_bank = 0; 5305 uint32_t act_offset = 0; 5306 uint32_t bank_offset = 0; 5307 uint16_t word = 0; 5308 uint16_t i = 0; 5309 5310 /* We need to know which is the valid flash bank. In the event 5311 * that we didn't allocate eeprom_shadow_ram, we may not be 5312 * managing flash_bank. So it cannot be trusted and needs 5313 * to be updated with each read. 5314 */ 5315 error = wm_valid_nvm_bank_detect_ich8lan(sc, &flash_bank); 5316 if (error) { 5317 aprint_error_dev(sc->sc_dev, "%s: failed to detect NVM bank\n", 5318 __func__); 5319 return error; 5320 } 5321 5322 /* Adjust offset appropriately if we're on bank 1 - adjust for word size */ 5323 bank_offset = flash_bank * (sc->sc_ich8_flash_bank_size * 2); 5324 5325 error = wm_get_swfwhw_semaphore(sc); 5326 if (error) { 5327 aprint_error_dev(sc->sc_dev, "%s: failed to get semaphore\n", 5328 __func__); 5329 return error; 5330 } 5331 5332 for (i = 0; i < words; i++) { 5333 /* The NVM part needs a byte offset, hence * 2 */ 5334 act_offset = bank_offset + ((offset + i) * 2); 5335 error = wm_read_ich8_word(sc, act_offset, &word); 5336 if (error) { 5337 aprint_error_dev(sc->sc_dev, "%s: failed to read NVM\n", 5338 __func__); 5339 break; 5340 } 5341 data[i] = word; 5342 } 5343 5344 wm_put_swfwhw_semaphore(sc); 5345 return error; 5346 } 5347 5348 /****************************************************************************** 5349 * This function does initial flash setup so that a new read/write/erase cycle 5350 * can be started. 5351 * 5352 * sc - The pointer to the hw structure 5353 ****************************************************************************/ 5354 static int32_t 5355 wm_ich8_cycle_init(struct wm_softc *sc) 5356 { 5357 uint16_t hsfsts; 5358 int32_t error = 1; 5359 int32_t i = 0; 5360 5361 hsfsts = ICH8_FLASH_READ16(sc, ICH_FLASH_HSFSTS); 5362 5363 /* May be check the Flash Des Valid bit in Hw status */ 5364 if ((hsfsts & HSFSTS_FLDVAL) == 0) { 5365 return error; 5366 } 5367 5368 /* Clear FCERR in Hw status by writing 1 */ 5369 /* Clear DAEL in Hw status by writing a 1 */ 5370 hsfsts |= HSFSTS_ERR | HSFSTS_DAEL; 5371 5372 ICH8_FLASH_WRITE16(sc, ICH_FLASH_HSFSTS, hsfsts); 5373 5374 /* Either we should have a hardware SPI cycle in progress bit to check 5375 * against, in order to start a new cycle or FDONE bit should be changed 5376 * in the hardware so that it is 1 after harware reset, which can then be 5377 * used as an indication whether a cycle is in progress or has been 5378 * completed .. we should also have some software semaphore mechanism to 5379 * guard FDONE or the cycle in progress bit so that two threads access to 5380 * those bits can be sequentiallized or a way so that 2 threads dont 5381 * start the cycle at the same time */ 5382 5383 if ((hsfsts & HSFSTS_FLINPRO) == 0) { 5384 /* There is no cycle running at present, so we can start a cycle */ 5385 /* Begin by setting Flash Cycle Done. */ 5386 hsfsts |= HSFSTS_DONE; 5387 ICH8_FLASH_WRITE16(sc, ICH_FLASH_HSFSTS, hsfsts); 5388 error = 0; 5389 } else { 5390 /* otherwise poll for sometime so the current cycle has a chance 5391 * to end before giving up. */ 5392 for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) { 5393 hsfsts = ICH8_FLASH_READ16(sc, ICH_FLASH_HSFSTS); 5394 if ((hsfsts & HSFSTS_FLINPRO) == 0) { 5395 error = 0; 5396 break; 5397 } 5398 delay(1); 5399 } 5400 if (error == 0) { 5401 /* Successful in waiting for previous cycle to timeout, 5402 * now set the Flash Cycle Done. */ 5403 hsfsts |= HSFSTS_DONE; 5404 ICH8_FLASH_WRITE16(sc, ICH_FLASH_HSFSTS, hsfsts); 5405 } 5406 } 5407 return error; 5408 } 5409 5410 /****************************************************************************** 5411 * This function starts a flash cycle and waits for its completion 5412 * 5413 * sc - The pointer to the hw structure 5414 ****************************************************************************/ 5415 static int32_t 5416 wm_ich8_flash_cycle(struct wm_softc *sc, uint32_t timeout) 5417 { 5418 uint16_t hsflctl; 5419 uint16_t hsfsts; 5420 int32_t error = 1; 5421 uint32_t i = 0; 5422 5423 /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ 5424 hsflctl = ICH8_FLASH_READ16(sc, ICH_FLASH_HSFCTL); 5425 hsflctl |= HSFCTL_GO; 5426 ICH8_FLASH_WRITE16(sc, ICH_FLASH_HSFCTL, hsflctl); 5427 5428 /* wait till FDONE bit is set to 1 */ 5429 do { 5430 hsfsts = ICH8_FLASH_READ16(sc, ICH_FLASH_HSFSTS); 5431 if (hsfsts & HSFSTS_DONE) 5432 break; 5433 delay(1); 5434 i++; 5435 } while (i < timeout); 5436 if ((hsfsts & HSFSTS_DONE) == 1 && (hsfsts & HSFSTS_ERR) == 0) { 5437 error = 0; 5438 } 5439 return error; 5440 } 5441 5442 /****************************************************************************** 5443 * Reads a byte or word from the NVM using the ICH8 flash access registers. 5444 * 5445 * sc - The pointer to the hw structure 5446 * index - The index of the byte or word to read. 5447 * size - Size of data to read, 1=byte 2=word 5448 * data - Pointer to the word to store the value read. 5449 *****************************************************************************/ 5450 static int32_t 5451 wm_read_ich8_data(struct wm_softc *sc, uint32_t index, 5452 uint32_t size, uint16_t* data) 5453 { 5454 uint16_t hsfsts; 5455 uint16_t hsflctl; 5456 uint32_t flash_linear_address; 5457 uint32_t flash_data = 0; 5458 int32_t error = 1; 5459 int32_t count = 0; 5460 5461 if (size < 1 || size > 2 || data == 0x0 || 5462 index > ICH_FLASH_LINEAR_ADDR_MASK) 5463 return error; 5464 5465 flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + 5466 sc->sc_ich8_flash_base; 5467 5468 do { 5469 delay(1); 5470 /* Steps */ 5471 error = wm_ich8_cycle_init(sc); 5472 if (error) 5473 break; 5474 5475 hsflctl = ICH8_FLASH_READ16(sc, ICH_FLASH_HSFCTL); 5476 /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ 5477 hsflctl |= ((size - 1) << HSFCTL_BCOUNT_SHIFT) & HSFCTL_BCOUNT_MASK; 5478 hsflctl |= ICH_CYCLE_READ << HSFCTL_CYCLE_SHIFT; 5479 ICH8_FLASH_WRITE16(sc, ICH_FLASH_HSFCTL, hsflctl); 5480 5481 /* Write the last 24 bits of index into Flash Linear address field in 5482 * Flash Address */ 5483 /* TODO: TBD maybe check the index against the size of flash */ 5484 5485 ICH8_FLASH_WRITE32(sc, ICH_FLASH_FADDR, flash_linear_address); 5486 5487 error = wm_ich8_flash_cycle(sc, ICH_FLASH_COMMAND_TIMEOUT); 5488 5489 /* Check if FCERR is set to 1, if set to 1, clear it and try the whole 5490 * sequence a few more times, else read in (shift in) the Flash Data0, 5491 * the order is least significant byte first msb to lsb */ 5492 if (error == 0) { 5493 flash_data = ICH8_FLASH_READ32(sc, ICH_FLASH_FDATA0); 5494 if (size == 1) { 5495 *data = (uint8_t)(flash_data & 0x000000FF); 5496 } else if (size == 2) { 5497 *data = (uint16_t)(flash_data & 0x0000FFFF); 5498 } 5499 break; 5500 } else { 5501 /* If we've gotten here, then things are probably completely hosed, 5502 * but if the error condition is detected, it won't hurt to give 5503 * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. 5504 */ 5505 hsfsts = ICH8_FLASH_READ16(sc, ICH_FLASH_HSFSTS); 5506 if (hsfsts & HSFSTS_ERR) { 5507 /* Repeat for some time before giving up. */ 5508 continue; 5509 } else if ((hsfsts & HSFSTS_DONE) == 0) { 5510 break; 5511 } 5512 } 5513 } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); 5514 5515 return error; 5516 } 5517 5518 /****************************************************************************** 5519 * Reads a single byte from the NVM using the ICH8 flash access registers. 5520 * 5521 * sc - pointer to wm_hw structure 5522 * index - The index of the byte to read. 5523 * data - Pointer to a byte to store the value read. 5524 *****************************************************************************/ 5525 static int32_t 5526 wm_read_ich8_byte(struct wm_softc *sc, uint32_t index, uint8_t* data) 5527 { 5528 int32_t status; 5529 uint16_t word = 0; 5530 5531 status = wm_read_ich8_data(sc, index, 1, &word); 5532 if (status == 0) { 5533 *data = (uint8_t)word; 5534 } 5535 5536 return status; 5537 } 5538 5539 /****************************************************************************** 5540 * Reads a word from the NVM using the ICH8 flash access registers. 5541 * 5542 * sc - pointer to wm_hw structure 5543 * index - The starting byte index of the word to read. 5544 * data - Pointer to a word to store the value read. 5545 *****************************************************************************/ 5546 static int32_t 5547 wm_read_ich8_word(struct wm_softc *sc, uint32_t index, uint16_t *data) 5548 { 5549 int32_t status; 5550 5551 status = wm_read_ich8_data(sc, index, 2, data); 5552 return status; 5553 } 5554 5555 static int 5556 wm_check_mng_mode(struct wm_softc *sc) 5557 { 5558 int rv; 5559 5560 switch (sc->sc_type) { 5561 case WM_T_ICH8: 5562 case WM_T_ICH9: 5563 case WM_T_ICH10: 5564 rv = wm_check_mng_mode_ich8lan(sc); 5565 break; 5566 #if 0 5567 case WM_T_82574: 5568 /* 5569 * The function is provided in em driver, but it's not 5570 * used. Why? 5571 */ 5572 rv = wm_check_mng_mode_82574(sc); 5573 break; 5574 #endif 5575 case WM_T_82571: 5576 case WM_T_82572: 5577 case WM_T_82573: 5578 case WM_T_80003: 5579 rv = wm_check_mng_mode_generic(sc); 5580 break; 5581 default: 5582 /* noting to do */ 5583 rv = 0; 5584 break; 5585 } 5586 5587 return rv; 5588 } 5589 5590 static int 5591 wm_check_mng_mode_ich8lan(struct wm_softc *sc) 5592 { 5593 uint32_t fwsm; 5594 5595 fwsm = CSR_READ(sc, WMREG_FWSM); 5596 5597 if ((fwsm & FWSM_MODE_MASK) == (MNG_ICH_IAMT_MODE << FWSM_MODE_SHIFT)) 5598 return 1; 5599 5600 return 0; 5601 } 5602 5603 #if 0 5604 static int 5605 wm_check_mng_mode_82574(struct wm_softc *sc) 5606 { 5607 uint16_t data; 5608 5609 wm_read_eeprom(sc, NVM_INIT_CONTROL2_REG, 1, &data); 5610 5611 if ((data & NVM_INIT_CTRL2_MNGM) != 0) 5612 return 1; 5613 5614 return 0; 5615 } 5616 #endif 5617 5618 static int 5619 wm_check_mng_mode_generic(struct wm_softc *sc) 5620 { 5621 uint32_t fwsm; 5622 5623 fwsm = CSR_READ(sc, WMREG_FWSM); 5624 5625 if ((fwsm & FWSM_MODE_MASK) == (MNG_IAMT_MODE << FWSM_MODE_SHIFT)) 5626 return 1; 5627 5628 return 0; 5629 } 5630 5631 static void 5632 wm_get_hw_control(struct wm_softc *sc) 5633 { 5634 uint32_t reg; 5635 5636 switch (sc->sc_type) { 5637 case WM_T_82573: 5638 #if 0 5639 case WM_T_82574: 5640 /* 5641 * FreeBSD's em driver has the function for 82574 to checks 5642 * the management mode, but it's not used. Why? 5643 */ 5644 #endif 5645 reg = CSR_READ(sc, WMREG_SWSM); 5646 CSR_WRITE(sc, WMREG_SWSM, reg | SWSM_DRV_LOAD); 5647 break; 5648 case WM_T_82571: 5649 case WM_T_82572: 5650 case WM_T_80003: 5651 case WM_T_ICH8: 5652 case WM_T_ICH9: 5653 case WM_T_ICH10: 5654 reg = CSR_READ(sc, WMREG_CTRL_EXT); 5655 CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_DRV_LOAD); 5656 break; 5657 default: 5658 break; 5659 } 5660 } 5661 5662 /* XXX Currently TBI only */ 5663 static int 5664 wm_check_for_link(struct wm_softc *sc) 5665 { 5666 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; 5667 uint32_t rxcw; 5668 uint32_t ctrl; 5669 uint32_t status; 5670 uint32_t sig; 5671 5672 rxcw = CSR_READ(sc, WMREG_RXCW); 5673 ctrl = CSR_READ(sc, WMREG_CTRL); 5674 status = CSR_READ(sc, WMREG_STATUS); 5675 5676 sig = (sc->sc_type > WM_T_82544) ? CTRL_SWDPIN(1) : 0; 5677 5678 DPRINTF(WM_DEBUG_LINK, ("%s: %s: sig = %d, status_lu = %d, rxcw_c = %d\n", 5679 device_xname(sc->sc_dev), __func__, 5680 ((ctrl & CTRL_SWDPIN(1)) == sig), 5681 ((status & STATUS_LU) != 0), 5682 ((rxcw & RXCW_C) != 0) 5683 )); 5684 5685 /* 5686 * SWDPIN LU RXCW 5687 * 0 0 0 5688 * 0 0 1 (should not happen) 5689 * 0 1 0 (should not happen) 5690 * 0 1 1 (should not happen) 5691 * 1 0 0 Disable autonego and force linkup 5692 * 1 0 1 got /C/ but not linkup yet 5693 * 1 1 0 (linkup) 5694 * 1 1 1 If IFM_AUTO, back to autonego 5695 * 5696 */ 5697 if (((ctrl & CTRL_SWDPIN(1)) == sig) 5698 && ((status & STATUS_LU) == 0) 5699 && ((rxcw & RXCW_C) == 0)) { 5700 DPRINTF(WM_DEBUG_LINK, ("%s: force linkup and fullduplex\n", 5701 __func__)); 5702 sc->sc_tbi_linkup = 0; 5703 /* Disable auto-negotiation in the TXCW register */ 5704 CSR_WRITE(sc, WMREG_TXCW, (sc->sc_txcw & ~TXCW_ANE)); 5705 5706 /* 5707 * Force link-up and also force full-duplex. 5708 * 5709 * NOTE: CTRL was updated TFCE and RFCE automatically, 5710 * so we should update sc->sc_ctrl 5711 */ 5712 sc->sc_ctrl = ctrl | CTRL_SLU | CTRL_FD; 5713 CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); 5714 } else if(((status & STATUS_LU) != 0) 5715 && ((rxcw & RXCW_C) != 0) 5716 && (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO)) { 5717 sc->sc_tbi_linkup = 1; 5718 DPRINTF(WM_DEBUG_LINK, ("%s: go back to autonego\n", 5719 __func__)); 5720 CSR_WRITE(sc, WMREG_TXCW, sc->sc_txcw); 5721 CSR_WRITE(sc, WMREG_CTRL, (ctrl & ~CTRL_SLU)); 5722 } else if (((ctrl & CTRL_SWDPIN(1)) == sig) 5723 && ((rxcw & RXCW_C) != 0)) { 5724 DPRINTF(WM_DEBUG_LINK, ("/C/")); 5725 } else { 5726 DPRINTF(WM_DEBUG_LINK, ("%s: %x,%x,%x\n", __func__, rxcw, ctrl, 5727 status)); 5728 } 5729 5730 return 0; 5731 } 5732
Indexes created Wed Sep 24 15:09:51 GMT 2025